[v13,2/2] spi: loongson: add bus driver for the loongson spi controller

Message ID 20230613075834.5219-3-zhuyinbo@loongson.cn
State New
Headers
Series spi: loongson: add bus driver for the loongson spi |

Commit Message

Yinbo Zhu June 13, 2023, 7:58 a.m. UTC
  This bus driver supports the Loongson SPI hardware controller in the
Loongson platforms and supports the use DTS and PCI framework to
register SPI device resources.

Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
 MAINTAINERS                     |   4 +
 drivers/spi/Kconfig             |  26 +++
 drivers/spi/Makefile            |   3 +
 drivers/spi/spi-loongson-core.c | 279 ++++++++++++++++++++++++++++++++
 drivers/spi/spi-loongson-pci.c  |  55 +++++++
 drivers/spi/spi-loongson-plat.c |  47 ++++++
 drivers/spi/spi-loongson.h      |  49 ++++++
 7 files changed, 463 insertions(+)
 create mode 100644 drivers/spi/spi-loongson-core.c
 create mode 100644 drivers/spi/spi-loongson-pci.c
 create mode 100644 drivers/spi/spi-loongson-plat.c
 create mode 100644 drivers/spi/spi-loongson.h
  

Comments

Andy Shevchenko June 13, 2023, 1:03 p.m. UTC | #1
On Tue, Jun 13, 2023 at 10:58 AM Yinbo Zhu <zhuyinbo@loongson.cn> wrote:

...

> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>

> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

Just a remark for the next contribution. When you have a tag, no need
to have a Cc for the same person, Git tools automatically add all
tagged people to the Cc list of email.
  
Yinbo Zhu June 14, 2023, 2:03 a.m. UTC | #2
在 2023/6/13 下午9:03, Andy Shevchenko 写道:
> On Tue, Jun 13, 2023 at 10:58 AM Yinbo Zhu <zhuyinbo@loongson.cn> wrote:
> 
> ...
> 
>> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
> 
>> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> 
> Just a remark for the next contribution. When you have a tag, no need
> to have a Cc for the same person, Git tools automatically add all
> tagged people to the Cc list of email.


okay, I got it.

Thanks,
Yinbo
>
  
Yinbo Zhu July 27, 2023, 3:09 a.m. UTC | #3
Friendly ping ?


在 2023/6/13 下午3:58, Yinbo Zhu 写道:
> This bus driver supports the Loongson SPI hardware controller in the
> Loongson platforms and supports the use DTS and PCI framework to
> register SPI device resources.
> 
> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
> Cc: Mark Brown <broonie@kernel.org>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> ---
>   MAINTAINERS                     |   4 +
>   drivers/spi/Kconfig             |  26 +++
>   drivers/spi/Makefile            |   3 +
>   drivers/spi/spi-loongson-core.c | 279 ++++++++++++++++++++++++++++++++
>   drivers/spi/spi-loongson-pci.c  |  55 +++++++
>   drivers/spi/spi-loongson-plat.c |  47 ++++++
>   drivers/spi/spi-loongson.h      |  49 ++++++
>   7 files changed, 463 insertions(+)
>   create mode 100644 drivers/spi/spi-loongson-core.c
>   create mode 100644 drivers/spi/spi-loongson-pci.c
>   create mode 100644 drivers/spi/spi-loongson-plat.c
>   create mode 100644 drivers/spi/spi-loongson.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 5e604dddd87b..69cb8fb2a0e1 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12191,6 +12191,10 @@ M:	Yinbo Zhu <zhuyinbo@loongson.cn>
>   L:	linux-spi@vger.kernel.org
>   S:	Maintained
>   F:	Documentation/devicetree/bindings/spi/loongson,ls2k-spi.yaml
> +F:	drivers/spi/spi-loongson-core.c
> +F:	drivers/spi/spi-loongson-pci.c
> +F:	drivers/spi/spi-loongson-plat.c
> +F:	drivers/spi/spi-loongson.h
>   
>   LOONGSON-2 SOC SERIES GUTS DRIVER
>   M:	Yinbo Zhu <zhuyinbo@loongson.cn>
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 3de2ebe8294a..6b953904792e 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -516,6 +516,32 @@ config SPI_LM70_LLP
>   	  which interfaces to an LM70 temperature sensor using
>   	  a parallel port.
>   
> +config SPI_LOONGSON_CORE
> +	tristate
> +	depends on LOONGARCH || COMPILE_TEST
> +
> +config SPI_LOONGSON_PCI
> +	tristate "Loongson SPI Controller PCI Driver Support"
> +	select SPI_LOONGSON_CORE
> +	depends on PCI && (LOONGARCH || COMPILE_TEST)
> +	help
> +	  This bus driver supports the Loongson SPI hardware controller in
> +	  the Loongson platforms and supports to use PCI framework to
> +	  register SPI device resources.
> +	  Say Y or M here if you want to use the SPI controller on
> +	  Loongson platform.
> +
> +config SPI_LOONGSON_PLATFORM
> +	tristate "Loongson SPI Controller Platform Driver Support"
> +	select SPI_LOONGSON_CORE
> +	depends on OF && (LOONGARCH || COMPILE_TEST)
> +	help
> +	  This bus driver supports the Loongson SPI hardware controller in
> +	  the Loongson platforms and supports to use DTS framework to
> +	  register SPI device resources.
> +	  Say Y or M here if you want to use the SPI controller on
> +	  Loongson platform.
> +
>   config SPI_LP8841_RTC
>   	tristate "ICP DAS LP-8841 SPI Controller for RTC"
>   	depends on MACH_PXA27X_DT || COMPILE_TEST
> diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
> index 28c4817a8a74..3e933064d237 100644
> --- a/drivers/spi/Makefile
> +++ b/drivers/spi/Makefile
> @@ -71,6 +71,9 @@ obj-$(CONFIG_SPI_INTEL_PLATFORM)	+= spi-intel-platform.o
>   obj-$(CONFIG_SPI_LANTIQ_SSC)		+= spi-lantiq-ssc.o
>   obj-$(CONFIG_SPI_JCORE)			+= spi-jcore.o
>   obj-$(CONFIG_SPI_LM70_LLP)		+= spi-lm70llp.o
> +obj-$(CONFIG_SPI_LOONGSON_CORE)		+= spi-loongson-core.o
> +obj-$(CONFIG_SPI_LOONGSON_PCI)		+= spi-loongson-pci.o
> +obj-$(CONFIG_SPI_LOONGSON_PLATFORM)	+= spi-loongson-plat.o
>   obj-$(CONFIG_SPI_LP8841_RTC)		+= spi-lp8841-rtc.o
>   obj-$(CONFIG_SPI_MESON_SPICC)		+= spi-meson-spicc.o
>   obj-$(CONFIG_SPI_MESON_SPIFC)		+= spi-meson-spifc.o
> diff --git a/drivers/spi/spi-loongson-core.c b/drivers/spi/spi-loongson-core.c
> new file mode 100644
> index 000000000000..f97800b6fd65
> --- /dev/null
> +++ b/drivers/spi/spi-loongson-core.c
> @@ -0,0 +1,279 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Loongson SPI Support
> +// Copyright (C) 2023 Loongson Technology Corporation Limited
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/spi/spi.h>
> +
> +#include "spi-loongson.h"
> +
> +static inline void loongson_spi_write_reg(struct loongson_spi *spi, unsigned char reg,
> +					  unsigned char data)
> +{
> +	writeb(data, spi->base + reg);
> +}
> +
> +static inline char loongson_spi_read_reg(struct loongson_spi *spi, unsigned char reg)
> +{
> +	return readb(spi->base + reg);
> +}
> +
> +static void loongson_spi_set_cs(struct spi_device *spi, bool en)
> +{
> +	int cs;
> +	unsigned char mask = (BIT(4) | BIT(0)) << spi_get_chipselect(spi, 0);
> +	unsigned char val = en ? mask :  (BIT(0) << spi_get_chipselect(spi, 0));
> +	struct loongson_spi *loongson_spi = spi_controller_get_devdata(spi->controller);
> +
> +	cs = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SFCS_REG) & ~mask;
> +	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SFCS_REG, val | cs);
> +}
> +
> +static void loongson_spi_set_clk(struct loongson_spi *loongson_spi, unsigned int hz)
> +{
> +	unsigned char val;
> +	unsigned int div, div_tmp;
> +	static const char rdiv[12] = {0, 1, 4, 2, 3, 5, 6, 7, 8, 9, 10, 11};
> +
> +	div = clamp_val(DIV_ROUND_UP_ULL(loongson_spi->clk_rate, hz), 2, 4096);
> +	div_tmp = rdiv[fls(div - 1)];
> +	loongson_spi->spcr = (div_tmp & GENMASK(1, 0)) >> 0;
> +	loongson_spi->sper = (div_tmp & GENMASK(3, 2)) >> 2;
> +	val = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPCR_REG);
> +	val &= ~GENMASK(1, 0);
> +	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPCR_REG, val |
> +			       loongson_spi->spcr);
> +	val = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPER_REG);
> +	val &= ~GENMASK(1, 0);
> +	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPER_REG, val |
> +			       loongson_spi->sper);
> +	loongson_spi->hz = hz;
> +}
> +
> +static void loongson_spi_set_mode(struct loongson_spi *loongson_spi,
> +				  struct spi_device *spi)
> +{
> +	unsigned char val;
> +
> +	val = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPCR_REG);
> +	val &= ~(LOONGSON_SPI_SPCR_CPOL | LOONGSON_SPI_SPCR_CPHA);
> +	if (spi->mode & SPI_CPOL)
> +		val |= LOONGSON_SPI_SPCR_CPOL;
> +	if (spi->mode & SPI_CPHA)
> +		val |= LOONGSON_SPI_SPCR_CPHA;
> +
> +	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPCR_REG, val);
> +	loongson_spi->mode |= spi->mode;
> +}
> +
> +static int loongson_spi_update_state(struct loongson_spi *loongson_spi,
> +				struct spi_device *spi, struct spi_transfer *t)
> +{
> +	if (t && loongson_spi->hz != t->speed_hz)
> +		loongson_spi_set_clk(loongson_spi, t->speed_hz);
> +
> +	if ((spi->mode ^ loongson_spi->mode) & SPI_MODE_X_MASK)
> +		loongson_spi_set_mode(loongson_spi, spi);
> +
> +	return 0;
> +}
> +
> +static int loongson_spi_setup(struct spi_device *spi)
> +{
> +	struct loongson_spi *loongson_spi;
> +
> +	loongson_spi = spi_controller_get_devdata(spi->controller);
> +	if (spi->bits_per_word % 8)
> +		return -EINVAL;
> +
> +	if (spi_get_chipselect(spi, 0) >= spi->controller->num_chipselect)
> +		return -EINVAL;
> +
> +	loongson_spi->hz = 0;
> +	loongson_spi_set_cs(spi, true);
> +
> +	return 0;
> +}
> +
> +static int loongson_spi_write_read_8bit(struct spi_device *spi, const u8 **tx_buf,
> +					u8 **rx_buf, unsigned int num)
> +{
> +	int ret;
> +	struct loongson_spi *loongson_spi = spi_controller_get_devdata(spi->controller);
> +
> +	if (tx_buf && *tx_buf)
> +		loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_FIFO_REG, *((*tx_buf)++));
> +	else
> +		loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_FIFO_REG, 0);
> +
> +	ret = readb_poll_timeout(loongson_spi->base + LOONGSON_SPI_SPSR_REG,
> +				 loongson_spi->spsr, (loongson_spi->spsr &
> +				 LOONGSON_SPI_SPSR_RFEMPTY) != LOONGSON_SPI_SPSR_RFEMPTY,
> +				 1, USEC_PER_MSEC);
> +
> +	if (rx_buf && *rx_buf)
> +		*(*rx_buf)++ = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_FIFO_REG);
> +	else
> +		loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_FIFO_REG);
> +
> +	return ret;
> +}
> +
> +static int loongson_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
> +{
> +	int ret;
> +	unsigned int count;
> +	const u8 *tx = xfer->tx_buf;
> +	u8 *rx = xfer->rx_buf;
> +
> +	count = xfer->len;
> +	do {
> +		ret = loongson_spi_write_read_8bit(spi, &tx, &rx, count);
> +		if (ret)
> +			break;
> +	} while (--count);
> +
> +	return ret;
> +}
> +
> +static int loongson_spi_prepare_message(struct spi_controller *ctlr, struct spi_message *m)
> +{
> +	struct loongson_spi *loongson_spi = spi_controller_get_devdata(ctlr);
> +
> +	loongson_spi->para = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_PARA_REG);
> +	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_PARA_REG, loongson_spi->para &
> +			       ~LOONGSON_SPI_PARA_MEM_EN);
> +
> +	return 0;
> +}
> +
> +static int loongson_spi_transfer_one(struct spi_controller *ctrl, struct spi_device *spi,
> +				     struct spi_transfer *xfer)
> +{
> +	struct loongson_spi *loongson_spi = spi_controller_get_devdata(spi->controller);
> +
> +	loongson_spi_update_state(loongson_spi, spi, xfer);
> +	if (xfer->len)
> +		return loongson_spi_write_read(spi, xfer);
> +
> +	return 0;
> +}
> +
> +static int loongson_spi_unprepare_message(struct spi_controller *ctrl, struct spi_message *m)
> +{
> +	struct loongson_spi *loongson_spi = spi_controller_get_devdata(ctrl);
> +
> +	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_PARA_REG, loongson_spi->para);
> +
> +	return 0;
> +}
> +
> +static void loongson_spi_reginit(struct loongson_spi *loongson_spi_dev)
> +{
> +	unsigned char val;
> +
> +	val = loongson_spi_read_reg(loongson_spi_dev, LOONGSON_SPI_SPCR_REG);
> +	val &= ~LOONGSON_SPI_SPCR_SPE;
> +	loongson_spi_write_reg(loongson_spi_dev, LOONGSON_SPI_SPCR_REG, val);
> +
> +	loongson_spi_write_reg(loongson_spi_dev, LOONGSON_SPI_SPSR_REG,
> +			       (LOONGSON_SPI_SPSR_SPIF | LOONGSON_SPI_SPSR_WCOL));
> +
> +	val = loongson_spi_read_reg(loongson_spi_dev, LOONGSON_SPI_SPCR_REG);
> +	val |= LOONGSON_SPI_SPCR_SPE;
> +	loongson_spi_write_reg(loongson_spi_dev, LOONGSON_SPI_SPCR_REG, val);
> +}
> +
> +int loongson_spi_init_controller(struct device *dev, void __iomem *regs)
> +{
> +	struct spi_controller *controller;
> +	struct loongson_spi *spi;
> +	struct clk *clk;
> +
> +	controller = devm_spi_alloc_host(dev, sizeof(struct loongson_spi));
> +	if (controller == NULL)
> +		return -ENOMEM;
> +
> +	controller->mode_bits = SPI_MODE_X_MASK | SPI_CS_HIGH;
> +	controller->setup = loongson_spi_setup;
> +	controller->prepare_message = loongson_spi_prepare_message;
> +	controller->transfer_one = loongson_spi_transfer_one;
> +	controller->unprepare_message = loongson_spi_unprepare_message;
> +	controller->set_cs = loongson_spi_set_cs;
> +	controller->num_chipselect = 4;
> +	device_set_node(&controller->dev, dev_fwnode(dev));
> +	dev_set_drvdata(dev, controller);
> +
> +	spi = spi_controller_get_devdata(controller);
> +	spi->base = regs;
> +	spi->controller = controller;
> +
> +	clk = devm_clk_get_optional(dev, NULL);
> +	if (IS_ERR(clk))
> +		return dev_err_probe(dev, PTR_ERR(clk), "unable to get clock\n");
> +
> +	spi->clk_rate = clk_get_rate(clk);
> +	loongson_spi_reginit(spi);
> +
> +	spi->mode = 0;
> +
> +	return devm_spi_register_controller(dev, controller);
> +}
> +EXPORT_SYMBOL_NS_GPL(loongson_spi_init_controller, SPI_LOONGSON_CORE);
> +
> +static int __maybe_unused loongson_spi_suspend(struct device *dev)
> +{
> +	struct loongson_spi *loongson_spi;
> +	struct spi_controller *controller;
> +
> +	controller = dev_get_drvdata(dev);
> +	spi_controller_suspend(controller);
> +
> +	loongson_spi = spi_controller_get_devdata(controller);
> +
> +	loongson_spi->spcr = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPCR_REG);
> +	loongson_spi->sper = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPER_REG);
> +	loongson_spi->spsr = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPSR_REG);
> +	loongson_spi->para = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_PARA_REG);
> +	loongson_spi->sfcs = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SFCS_REG);
> +	loongson_spi->timi = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_TIMI_REG);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused loongson_spi_resume(struct device *dev)
> +{
> +	struct loongson_spi *loongson_spi;
> +	struct spi_controller *controller;
> +
> +	controller = dev_get_drvdata(dev);
> +	loongson_spi = spi_controller_get_devdata(controller);
> +
> +	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPCR_REG, loongson_spi->spcr);
> +	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPER_REG, loongson_spi->sper);
> +	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPSR_REG, loongson_spi->spsr);
> +	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_PARA_REG, loongson_spi->para);
> +	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SFCS_REG, loongson_spi->sfcs);
> +	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_TIMI_REG, loongson_spi->timi);
> +
> +	spi_controller_resume(controller);
> +
> +	return 0;
> +}
> +
> +const struct dev_pm_ops loongson_spi_dev_pm_ops = {
> +	.suspend = loongson_spi_suspend,
> +	.resume = loongson_spi_resume,
> +};
> +EXPORT_SYMBOL_NS_GPL(loongson_spi_dev_pm_ops, SPI_LOONGSON_CORE);
> +
> +MODULE_DESCRIPTION("Loongson SPI core driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/spi/spi-loongson-pci.c b/drivers/spi/spi-loongson-pci.c
> new file mode 100644
> index 000000000000..134cda0c13a5
> --- /dev/null
> +++ b/drivers/spi/spi-loongson-pci.c
> @@ -0,0 +1,55 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// PCI interface driver for Loongson SPI Support
> +// Copyright (C) 2023 Loongson Technology Corporation Limited
> +
> +#include <linux/mod_devicetable.h>
> +#include <linux/pci.h>
> +
> +#include "spi-loongson.h"
> +
> +static int loongson_spi_pci_register(struct pci_dev *pdev,
> +			const struct pci_device_id *ent)
> +{
> +	int ret;
> +	void __iomem *reg_base;
> +	struct device *dev = &pdev->dev;
> +	int pci_bar = 0;
> +
> +	ret = pcim_enable_device(pdev);
> +	if (ret < 0)
> +		return dev_err_probe(dev, ret, "cannot enable pci device\n");
> +
> +	ret = pcim_iomap_regions(pdev, BIT(pci_bar), pci_name(pdev));
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to request and remap memory\n");
> +
> +	reg_base = pcim_iomap_table(pdev)[pci_bar];
> +
> +	ret = loongson_spi_init_controller(dev, reg_base);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to initialize controller\n");
> +
> +	return 0;
> +}
> +
> +static struct pci_device_id loongson_spi_devices[] = {
> +	{ PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, 0x7a0b) },
> +	{ PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, 0x7a1b) },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(pci, loongson_spi_devices);
> +
> +static struct pci_driver loongson_spi_pci_driver = {
> +	.name       = "loongson-spi-pci",
> +	.id_table   = loongson_spi_devices,
> +	.probe      = loongson_spi_pci_register,
> +	.driver	= {
> +		.bus = &pci_bus_type,
> +		.pm = &loongson_spi_dev_pm_ops,
> +	},
> +};
> +module_pci_driver(loongson_spi_pci_driver);
> +
> +MODULE_DESCRIPTION("Loongson spi pci driver");
> +MODULE_LICENSE("GPL");
> +MODULE_IMPORT_NS(SPI_LOONGSON_CORE);
> diff --git a/drivers/spi/spi-loongson-plat.c b/drivers/spi/spi-loongson-plat.c
> new file mode 100644
> index 000000000000..c066e5f5891e
> --- /dev/null
> +++ b/drivers/spi/spi-loongson-plat.c
> @@ -0,0 +1,47 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Platform driver for Loongson SPI Support
> +// Copyright (C) 2023 Loongson Technology Corporation Limited
> +
> +#include <linux/err.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/platform_device.h>
> +
> +#include "spi-loongson.h"
> +
> +static int loongson_spi_platform_probe(struct platform_device *pdev)
> +{
> +	int ret;
> +	void __iomem *reg_base;
> +	struct device *dev = &pdev->dev;
> +
> +	reg_base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(reg_base))
> +		return PTR_ERR(reg_base);
> +
> +	ret = loongson_spi_init_controller(dev, reg_base);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to initialize controller\n");
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id loongson_spi_id_table[] = {
> +	{ .compatible = "loongson,ls2k1000-spi" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, loongson_spi_id_table);
> +
> +static struct platform_driver loongson_spi_plat_driver = {
> +	.probe = loongson_spi_platform_probe,
> +	.driver	= {
> +		.name	= "loongson-spi",
> +		.bus = &platform_bus_type,
> +		.pm = &loongson_spi_dev_pm_ops,
> +		.of_match_table = loongson_spi_id_table,
> +	},
> +};
> +module_platform_driver(loongson_spi_plat_driver);
> +
> +MODULE_DESCRIPTION("Loongson spi platform driver");
> +MODULE_LICENSE("GPL");
> +MODULE_IMPORT_NS(SPI_LOONGSON_CORE);
> diff --git a/drivers/spi/spi-loongson.h b/drivers/spi/spi-loongson.h
> new file mode 100644
> index 000000000000..35f95b161842
> --- /dev/null
> +++ b/drivers/spi/spi-loongson.h
> @@ -0,0 +1,49 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/* Header File for Loongson SPI Driver. */
> +/* Copyright (C) 2023 Loongson Technology Corporation Limited */
> +
> +#ifndef __LINUX_SPI_LOONGSON_H
> +#define __LINUX_SPI_LOONGSON_H
> +
> +#include <linux/bits.h>
> +#include <linux/pm.h>
> +#include <linux/types.h>
> +
> +#define	LOONGSON_SPI_SPCR_REG	0x00
> +#define	LOONGSON_SPI_SPSR_REG	0x01
> +#define	LOONGSON_SPI_FIFO_REG	0x02
> +#define	LOONGSON_SPI_SPER_REG	0x03
> +#define	LOONGSON_SPI_PARA_REG	0x04
> +#define	LOONGSON_SPI_SFCS_REG	0x05
> +#define	LOONGSON_SPI_TIMI_REG	0x06
> +
> +/* Bits definition for Loongson SPI register */
> +#define	LOONGSON_SPI_PARA_MEM_EN	BIT(0)
> +#define	LOONGSON_SPI_SPCR_CPHA	BIT(2)
> +#define	LOONGSON_SPI_SPCR_CPOL	BIT(3)
> +#define	LOONGSON_SPI_SPCR_SPE	BIT(6)
> +#define	LOONGSON_SPI_SPSR_RFEMPTY	BIT(0)
> +#define	LOONGSON_SPI_SPSR_WCOL	BIT(6)
> +#define	LOONGSON_SPI_SPSR_SPIF	BIT(7)
> +
> +struct device;
> +struct spi_controller;
> +
> +struct loongson_spi {
> +	struct	spi_controller	*controller;
> +	void __iomem		*base;
> +	int			cs_active;
> +	unsigned int		hz;
> +	unsigned char		spcr;
> +	unsigned char		sper;
> +	unsigned char		spsr;
> +	unsigned char		para;
> +	unsigned char		sfcs;
> +	unsigned char		timi;
> +	unsigned int		mode;
> +	u64			clk_rate;
> +};
> +
> +int loongson_spi_init_controller(struct device *dev, void __iomem *reg);
> +extern const struct dev_pm_ops loongson_spi_dev_pm_ops;
> +#endif /* __LINUX_SPI_LOONGSON_H */
>
  
Mark Brown July 27, 2023, 11:37 a.m. UTC | #4
On Thu, Jul 27, 2023 at 11:09:16AM +0800, Yinbo Zhu wrote:

> Friendly ping ?

Please don't send content free pings and please allow a reasonable time
for review.  People get busy, go on holiday, attend conferences and so 
on so unless there is some reason for urgency (like critical bug fixes)
please allow at least a couple of weeks for review.  If there have been
review comments then people may be waiting for those to be addressed.

Sending content free pings adds to the mail volume (if they are seen at
all) which is often the problem and since they can't be reviewed
directly if something has gone wrong you'll have to resend the patches
anyway, so sending again is generally a better approach though there are
some other maintainers who like them - if in doubt look at how patches
for the subsystem are normally handled.
  
Yinbo Zhu July 28, 2023, 3:36 a.m. UTC | #5
在 2023/7/27 下午7:37, Mark Brown 写道:
> On Thu, Jul 27, 2023 at 11:09:16AM +0800, Yinbo Zhu wrote:
> 
>> Friendly ping ?
> 
> Please don't send content free pings and please allow a reasonable time
> for review.  People get busy, go on holiday, attend conferences and so
> on so unless there is some reason for urgency (like critical bug fixes)
> please allow at least a couple of weeks for review.  If there have been
> review comments then people may be waiting for those to be addressed.


Sorry, my community experience is poor.  How many weeks does the
community usually take to review ?  and this time that I waited for six
weeks and then ping.

> 
> Sending content free pings adds to the mail volume (if they are seen at
> all) which is often the problem and since they can't be reviewed
> directly if something has gone wrong you'll have to resend the patches
> anyway, so sending again is generally a better approach though there are
> some other maintainers who like them - if in doubt look at how patches
> for the subsystem are normally handled.


Sorry, I don't got it, that free ping usually only needs to be sent to
the subsystem maintainer?

Not recommended to use free ping?  or resend the same patch.  If the
patch does not need to be modified, does it require sending the same
patch ?  And the version number remains the same?
> 

Thanks,
Yinbo
  
Mark Brown July 28, 2023, 12:31 p.m. UTC | #6
On Fri, Jul 28, 2023 at 11:36:48AM +0800, Yinbo Zhu wrote:
> 在 2023/7/27 下午7:37, Mark Brown 写道:
> > On Thu, Jul 27, 2023 at 11:09:16AM +0800, Yinbo Zhu wrote:

> > > Friendly ping ?

> > Please don't send content free pings and please allow a reasonable time
> > for review.  People get busy, go on holiday, attend conferences and so
> > on so unless there is some reason for urgency (like critical bug fixes)
> > please allow at least a couple of weeks for review.  If there have been
> > review comments then people may be waiting for those to be addressed.

> Sorry, my community experience is poor.  How many weeks does the
> community usually take to review ?  and this time that I waited for six
> weeks and then ping.

The delay here is probably fine - the above is a form letter that I send
whenever people ping so it tries to cover all eventualities.  How long
to leave things depends a bit on what the change is, an urgent bugfix is
going to be different from a spelling fix in a comment.

> > Sending content free pings adds to the mail volume (if they are seen at
> > all) which is often the problem and since they can't be reviewed
> > directly if something has gone wrong you'll have to resend the patches
> > anyway, so sending again is generally a better approach though there are
> > some other maintainers who like them - if in doubt look at how patches
> > for the subsystem are normally handled.

> Sorry, I don't got it, that free ping usually only needs to be sent to
> the subsystem maintainer?

> Not recommended to use free ping?  or resend the same patch.  If the
> patch does not need to be modified, does it require sending the same
> patch ?  And the version number remains the same?

I'm saying it's generally better to ping by resending the patch.
Typically keeping the same version number makes sense when doing that -
people normally say [PATCH RESEND vN] in the subject line.
  
Yinbo Zhu July 31, 2023, 6:07 a.m. UTC | #7
在 2023/7/28 下午8:31, Mark Brown 写道:
> On Fri, Jul 28, 2023 at 11:36:48AM +0800, Yinbo Zhu wrote:
>> 在 2023/7/27 下午7:37, Mark Brown 写道:
>>> On Thu, Jul 27, 2023 at 11:09:16AM +0800, Yinbo Zhu wrote:
> 
>>>> Friendly ping ?
> 
>>> Please don't send content free pings and please allow a reasonable time
>>> for review.  People get busy, go on holiday, attend conferences and so
>>> on so unless there is some reason for urgency (like critical bug fixes)
>>> please allow at least a couple of weeks for review.  If there have been
>>> review comments then people may be waiting for those to be addressed.
> 
>> Sorry, my community experience is poor.  How many weeks does the
>> community usually take to review ?  and this time that I waited for six
>> weeks and then ping.
> 
> The delay here is probably fine - the above is a form letter that I send
> whenever people ping so it tries to cover all eventualities.  How long
> to leave things depends a bit on what the change is, an urgent bugfix is
> going to be different from a spelling fix in a comment.


okay, I got it.

> 
>>> Sending content free pings adds to the mail volume (if they are seen at
>>> all) which is often the problem and since they can't be reviewed
>>> directly if something has gone wrong you'll have to resend the patches
>>> anyway, so sending again is generally a better approach though there are
>>> some other maintainers who like them - if in doubt look at how patches
>>> for the subsystem are normally handled.
> 
>> Sorry, I don't got it, that free ping usually only needs to be sent to
>> the subsystem maintainer?
> 
>> Not recommended to use free ping?  or resend the same patch.  If the
>> patch does not need to be modified, does it require sending the same
>> patch ?  And the version number remains the same?
> 
> I'm saying it's generally better to ping by resending the patch.
> Typically keeping the same version number makes sense when doing that -
> people normally say [PATCH RESEND vN] in the subject line.


okay, I got it

Thanks,
Yinbo
  

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 5e604dddd87b..69cb8fb2a0e1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12191,6 +12191,10 @@  M:	Yinbo Zhu <zhuyinbo@loongson.cn>
 L:	linux-spi@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/spi/loongson,ls2k-spi.yaml
+F:	drivers/spi/spi-loongson-core.c
+F:	drivers/spi/spi-loongson-pci.c
+F:	drivers/spi/spi-loongson-plat.c
+F:	drivers/spi/spi-loongson.h
 
 LOONGSON-2 SOC SERIES GUTS DRIVER
 M:	Yinbo Zhu <zhuyinbo@loongson.cn>
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 3de2ebe8294a..6b953904792e 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -516,6 +516,32 @@  config SPI_LM70_LLP
 	  which interfaces to an LM70 temperature sensor using
 	  a parallel port.
 
+config SPI_LOONGSON_CORE
+	tristate
+	depends on LOONGARCH || COMPILE_TEST
+
+config SPI_LOONGSON_PCI
+	tristate "Loongson SPI Controller PCI Driver Support"
+	select SPI_LOONGSON_CORE
+	depends on PCI && (LOONGARCH || COMPILE_TEST)
+	help
+	  This bus driver supports the Loongson SPI hardware controller in
+	  the Loongson platforms and supports to use PCI framework to
+	  register SPI device resources.
+	  Say Y or M here if you want to use the SPI controller on
+	  Loongson platform.
+
+config SPI_LOONGSON_PLATFORM
+	tristate "Loongson SPI Controller Platform Driver Support"
+	select SPI_LOONGSON_CORE
+	depends on OF && (LOONGARCH || COMPILE_TEST)
+	help
+	  This bus driver supports the Loongson SPI hardware controller in
+	  the Loongson platforms and supports to use DTS framework to
+	  register SPI device resources.
+	  Say Y or M here if you want to use the SPI controller on
+	  Loongson platform.
+
 config SPI_LP8841_RTC
 	tristate "ICP DAS LP-8841 SPI Controller for RTC"
 	depends on MACH_PXA27X_DT || COMPILE_TEST
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 28c4817a8a74..3e933064d237 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -71,6 +71,9 @@  obj-$(CONFIG_SPI_INTEL_PLATFORM)	+= spi-intel-platform.o
 obj-$(CONFIG_SPI_LANTIQ_SSC)		+= spi-lantiq-ssc.o
 obj-$(CONFIG_SPI_JCORE)			+= spi-jcore.o
 obj-$(CONFIG_SPI_LM70_LLP)		+= spi-lm70llp.o
+obj-$(CONFIG_SPI_LOONGSON_CORE)		+= spi-loongson-core.o
+obj-$(CONFIG_SPI_LOONGSON_PCI)		+= spi-loongson-pci.o
+obj-$(CONFIG_SPI_LOONGSON_PLATFORM)	+= spi-loongson-plat.o
 obj-$(CONFIG_SPI_LP8841_RTC)		+= spi-lp8841-rtc.o
 obj-$(CONFIG_SPI_MESON_SPICC)		+= spi-meson-spicc.o
 obj-$(CONFIG_SPI_MESON_SPIFC)		+= spi-meson-spifc.o
diff --git a/drivers/spi/spi-loongson-core.c b/drivers/spi/spi-loongson-core.c
new file mode 100644
index 000000000000..f97800b6fd65
--- /dev/null
+++ b/drivers/spi/spi-loongson-core.c
@@ -0,0 +1,279 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+// Loongson SPI Support
+// Copyright (C) 2023 Loongson Technology Corporation Limited
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#include "spi-loongson.h"
+
+static inline void loongson_spi_write_reg(struct loongson_spi *spi, unsigned char reg,
+					  unsigned char data)
+{
+	writeb(data, spi->base + reg);
+}
+
+static inline char loongson_spi_read_reg(struct loongson_spi *spi, unsigned char reg)
+{
+	return readb(spi->base + reg);
+}
+
+static void loongson_spi_set_cs(struct spi_device *spi, bool en)
+{
+	int cs;
+	unsigned char mask = (BIT(4) | BIT(0)) << spi_get_chipselect(spi, 0);
+	unsigned char val = en ? mask :  (BIT(0) << spi_get_chipselect(spi, 0));
+	struct loongson_spi *loongson_spi = spi_controller_get_devdata(spi->controller);
+
+	cs = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SFCS_REG) & ~mask;
+	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SFCS_REG, val | cs);
+}
+
+static void loongson_spi_set_clk(struct loongson_spi *loongson_spi, unsigned int hz)
+{
+	unsigned char val;
+	unsigned int div, div_tmp;
+	static const char rdiv[12] = {0, 1, 4, 2, 3, 5, 6, 7, 8, 9, 10, 11};
+
+	div = clamp_val(DIV_ROUND_UP_ULL(loongson_spi->clk_rate, hz), 2, 4096);
+	div_tmp = rdiv[fls(div - 1)];
+	loongson_spi->spcr = (div_tmp & GENMASK(1, 0)) >> 0;
+	loongson_spi->sper = (div_tmp & GENMASK(3, 2)) >> 2;
+	val = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPCR_REG);
+	val &= ~GENMASK(1, 0);
+	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPCR_REG, val |
+			       loongson_spi->spcr);
+	val = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPER_REG);
+	val &= ~GENMASK(1, 0);
+	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPER_REG, val |
+			       loongson_spi->sper);
+	loongson_spi->hz = hz;
+}
+
+static void loongson_spi_set_mode(struct loongson_spi *loongson_spi,
+				  struct spi_device *spi)
+{
+	unsigned char val;
+
+	val = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPCR_REG);
+	val &= ~(LOONGSON_SPI_SPCR_CPOL | LOONGSON_SPI_SPCR_CPHA);
+	if (spi->mode & SPI_CPOL)
+		val |= LOONGSON_SPI_SPCR_CPOL;
+	if (spi->mode & SPI_CPHA)
+		val |= LOONGSON_SPI_SPCR_CPHA;
+
+	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPCR_REG, val);
+	loongson_spi->mode |= spi->mode;
+}
+
+static int loongson_spi_update_state(struct loongson_spi *loongson_spi,
+				struct spi_device *spi, struct spi_transfer *t)
+{
+	if (t && loongson_spi->hz != t->speed_hz)
+		loongson_spi_set_clk(loongson_spi, t->speed_hz);
+
+	if ((spi->mode ^ loongson_spi->mode) & SPI_MODE_X_MASK)
+		loongson_spi_set_mode(loongson_spi, spi);
+
+	return 0;
+}
+
+static int loongson_spi_setup(struct spi_device *spi)
+{
+	struct loongson_spi *loongson_spi;
+
+	loongson_spi = spi_controller_get_devdata(spi->controller);
+	if (spi->bits_per_word % 8)
+		return -EINVAL;
+
+	if (spi_get_chipselect(spi, 0) >= spi->controller->num_chipselect)
+		return -EINVAL;
+
+	loongson_spi->hz = 0;
+	loongson_spi_set_cs(spi, true);
+
+	return 0;
+}
+
+static int loongson_spi_write_read_8bit(struct spi_device *spi, const u8 **tx_buf,
+					u8 **rx_buf, unsigned int num)
+{
+	int ret;
+	struct loongson_spi *loongson_spi = spi_controller_get_devdata(spi->controller);
+
+	if (tx_buf && *tx_buf)
+		loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_FIFO_REG, *((*tx_buf)++));
+	else
+		loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_FIFO_REG, 0);
+
+	ret = readb_poll_timeout(loongson_spi->base + LOONGSON_SPI_SPSR_REG,
+				 loongson_spi->spsr, (loongson_spi->spsr &
+				 LOONGSON_SPI_SPSR_RFEMPTY) != LOONGSON_SPI_SPSR_RFEMPTY,
+				 1, USEC_PER_MSEC);
+
+	if (rx_buf && *rx_buf)
+		*(*rx_buf)++ = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_FIFO_REG);
+	else
+		loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_FIFO_REG);
+
+	return ret;
+}
+
+static int loongson_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
+{
+	int ret;
+	unsigned int count;
+	const u8 *tx = xfer->tx_buf;
+	u8 *rx = xfer->rx_buf;
+
+	count = xfer->len;
+	do {
+		ret = loongson_spi_write_read_8bit(spi, &tx, &rx, count);
+		if (ret)
+			break;
+	} while (--count);
+
+	return ret;
+}
+
+static int loongson_spi_prepare_message(struct spi_controller *ctlr, struct spi_message *m)
+{
+	struct loongson_spi *loongson_spi = spi_controller_get_devdata(ctlr);
+
+	loongson_spi->para = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_PARA_REG);
+	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_PARA_REG, loongson_spi->para &
+			       ~LOONGSON_SPI_PARA_MEM_EN);
+
+	return 0;
+}
+
+static int loongson_spi_transfer_one(struct spi_controller *ctrl, struct spi_device *spi,
+				     struct spi_transfer *xfer)
+{
+	struct loongson_spi *loongson_spi = spi_controller_get_devdata(spi->controller);
+
+	loongson_spi_update_state(loongson_spi, spi, xfer);
+	if (xfer->len)
+		return loongson_spi_write_read(spi, xfer);
+
+	return 0;
+}
+
+static int loongson_spi_unprepare_message(struct spi_controller *ctrl, struct spi_message *m)
+{
+	struct loongson_spi *loongson_spi = spi_controller_get_devdata(ctrl);
+
+	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_PARA_REG, loongson_spi->para);
+
+	return 0;
+}
+
+static void loongson_spi_reginit(struct loongson_spi *loongson_spi_dev)
+{
+	unsigned char val;
+
+	val = loongson_spi_read_reg(loongson_spi_dev, LOONGSON_SPI_SPCR_REG);
+	val &= ~LOONGSON_SPI_SPCR_SPE;
+	loongson_spi_write_reg(loongson_spi_dev, LOONGSON_SPI_SPCR_REG, val);
+
+	loongson_spi_write_reg(loongson_spi_dev, LOONGSON_SPI_SPSR_REG,
+			       (LOONGSON_SPI_SPSR_SPIF | LOONGSON_SPI_SPSR_WCOL));
+
+	val = loongson_spi_read_reg(loongson_spi_dev, LOONGSON_SPI_SPCR_REG);
+	val |= LOONGSON_SPI_SPCR_SPE;
+	loongson_spi_write_reg(loongson_spi_dev, LOONGSON_SPI_SPCR_REG, val);
+}
+
+int loongson_spi_init_controller(struct device *dev, void __iomem *regs)
+{
+	struct spi_controller *controller;
+	struct loongson_spi *spi;
+	struct clk *clk;
+
+	controller = devm_spi_alloc_host(dev, sizeof(struct loongson_spi));
+	if (controller == NULL)
+		return -ENOMEM;
+
+	controller->mode_bits = SPI_MODE_X_MASK | SPI_CS_HIGH;
+	controller->setup = loongson_spi_setup;
+	controller->prepare_message = loongson_spi_prepare_message;
+	controller->transfer_one = loongson_spi_transfer_one;
+	controller->unprepare_message = loongson_spi_unprepare_message;
+	controller->set_cs = loongson_spi_set_cs;
+	controller->num_chipselect = 4;
+	device_set_node(&controller->dev, dev_fwnode(dev));
+	dev_set_drvdata(dev, controller);
+
+	spi = spi_controller_get_devdata(controller);
+	spi->base = regs;
+	spi->controller = controller;
+
+	clk = devm_clk_get_optional(dev, NULL);
+	if (IS_ERR(clk))
+		return dev_err_probe(dev, PTR_ERR(clk), "unable to get clock\n");
+
+	spi->clk_rate = clk_get_rate(clk);
+	loongson_spi_reginit(spi);
+
+	spi->mode = 0;
+
+	return devm_spi_register_controller(dev, controller);
+}
+EXPORT_SYMBOL_NS_GPL(loongson_spi_init_controller, SPI_LOONGSON_CORE);
+
+static int __maybe_unused loongson_spi_suspend(struct device *dev)
+{
+	struct loongson_spi *loongson_spi;
+	struct spi_controller *controller;
+
+	controller = dev_get_drvdata(dev);
+	spi_controller_suspend(controller);
+
+	loongson_spi = spi_controller_get_devdata(controller);
+
+	loongson_spi->spcr = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPCR_REG);
+	loongson_spi->sper = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPER_REG);
+	loongson_spi->spsr = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SPSR_REG);
+	loongson_spi->para = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_PARA_REG);
+	loongson_spi->sfcs = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_SFCS_REG);
+	loongson_spi->timi = loongson_spi_read_reg(loongson_spi, LOONGSON_SPI_TIMI_REG);
+
+	return 0;
+}
+
+static int __maybe_unused loongson_spi_resume(struct device *dev)
+{
+	struct loongson_spi *loongson_spi;
+	struct spi_controller *controller;
+
+	controller = dev_get_drvdata(dev);
+	loongson_spi = spi_controller_get_devdata(controller);
+
+	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPCR_REG, loongson_spi->spcr);
+	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPER_REG, loongson_spi->sper);
+	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SPSR_REG, loongson_spi->spsr);
+	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_PARA_REG, loongson_spi->para);
+	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_SFCS_REG, loongson_spi->sfcs);
+	loongson_spi_write_reg(loongson_spi, LOONGSON_SPI_TIMI_REG, loongson_spi->timi);
+
+	spi_controller_resume(controller);
+
+	return 0;
+}
+
+const struct dev_pm_ops loongson_spi_dev_pm_ops = {
+	.suspend = loongson_spi_suspend,
+	.resume = loongson_spi_resume,
+};
+EXPORT_SYMBOL_NS_GPL(loongson_spi_dev_pm_ops, SPI_LOONGSON_CORE);
+
+MODULE_DESCRIPTION("Loongson SPI core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi-loongson-pci.c b/drivers/spi/spi-loongson-pci.c
new file mode 100644
index 000000000000..134cda0c13a5
--- /dev/null
+++ b/drivers/spi/spi-loongson-pci.c
@@ -0,0 +1,55 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+// PCI interface driver for Loongson SPI Support
+// Copyright (C) 2023 Loongson Technology Corporation Limited
+
+#include <linux/mod_devicetable.h>
+#include <linux/pci.h>
+
+#include "spi-loongson.h"
+
+static int loongson_spi_pci_register(struct pci_dev *pdev,
+			const struct pci_device_id *ent)
+{
+	int ret;
+	void __iomem *reg_base;
+	struct device *dev = &pdev->dev;
+	int pci_bar = 0;
+
+	ret = pcim_enable_device(pdev);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "cannot enable pci device\n");
+
+	ret = pcim_iomap_regions(pdev, BIT(pci_bar), pci_name(pdev));
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to request and remap memory\n");
+
+	reg_base = pcim_iomap_table(pdev)[pci_bar];
+
+	ret = loongson_spi_init_controller(dev, reg_base);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to initialize controller\n");
+
+	return 0;
+}
+
+static struct pci_device_id loongson_spi_devices[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, 0x7a0b) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_LOONGSON, 0x7a1b) },
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, loongson_spi_devices);
+
+static struct pci_driver loongson_spi_pci_driver = {
+	.name       = "loongson-spi-pci",
+	.id_table   = loongson_spi_devices,
+	.probe      = loongson_spi_pci_register,
+	.driver	= {
+		.bus = &pci_bus_type,
+		.pm = &loongson_spi_dev_pm_ops,
+	},
+};
+module_pci_driver(loongson_spi_pci_driver);
+
+MODULE_DESCRIPTION("Loongson spi pci driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(SPI_LOONGSON_CORE);
diff --git a/drivers/spi/spi-loongson-plat.c b/drivers/spi/spi-loongson-plat.c
new file mode 100644
index 000000000000..c066e5f5891e
--- /dev/null
+++ b/drivers/spi/spi-loongson-plat.c
@@ -0,0 +1,47 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+// Platform driver for Loongson SPI Support
+// Copyright (C) 2023 Loongson Technology Corporation Limited
+
+#include <linux/err.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+
+#include "spi-loongson.h"
+
+static int loongson_spi_platform_probe(struct platform_device *pdev)
+{
+	int ret;
+	void __iomem *reg_base;
+	struct device *dev = &pdev->dev;
+
+	reg_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
+
+	ret = loongson_spi_init_controller(dev, reg_base);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to initialize controller\n");
+
+	return 0;
+}
+
+static const struct of_device_id loongson_spi_id_table[] = {
+	{ .compatible = "loongson,ls2k1000-spi" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, loongson_spi_id_table);
+
+static struct platform_driver loongson_spi_plat_driver = {
+	.probe = loongson_spi_platform_probe,
+	.driver	= {
+		.name	= "loongson-spi",
+		.bus = &platform_bus_type,
+		.pm = &loongson_spi_dev_pm_ops,
+		.of_match_table = loongson_spi_id_table,
+	},
+};
+module_platform_driver(loongson_spi_plat_driver);
+
+MODULE_DESCRIPTION("Loongson spi platform driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(SPI_LOONGSON_CORE);
diff --git a/drivers/spi/spi-loongson.h b/drivers/spi/spi-loongson.h
new file mode 100644
index 000000000000..35f95b161842
--- /dev/null
+++ b/drivers/spi/spi-loongson.h
@@ -0,0 +1,49 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Header File for Loongson SPI Driver. */
+/* Copyright (C) 2023 Loongson Technology Corporation Limited */
+
+#ifndef __LINUX_SPI_LOONGSON_H
+#define __LINUX_SPI_LOONGSON_H
+
+#include <linux/bits.h>
+#include <linux/pm.h>
+#include <linux/types.h>
+
+#define	LOONGSON_SPI_SPCR_REG	0x00
+#define	LOONGSON_SPI_SPSR_REG	0x01
+#define	LOONGSON_SPI_FIFO_REG	0x02
+#define	LOONGSON_SPI_SPER_REG	0x03
+#define	LOONGSON_SPI_PARA_REG	0x04
+#define	LOONGSON_SPI_SFCS_REG	0x05
+#define	LOONGSON_SPI_TIMI_REG	0x06
+
+/* Bits definition for Loongson SPI register */
+#define	LOONGSON_SPI_PARA_MEM_EN	BIT(0)
+#define	LOONGSON_SPI_SPCR_CPHA	BIT(2)
+#define	LOONGSON_SPI_SPCR_CPOL	BIT(3)
+#define	LOONGSON_SPI_SPCR_SPE	BIT(6)
+#define	LOONGSON_SPI_SPSR_RFEMPTY	BIT(0)
+#define	LOONGSON_SPI_SPSR_WCOL	BIT(6)
+#define	LOONGSON_SPI_SPSR_SPIF	BIT(7)
+
+struct device;
+struct spi_controller;
+
+struct loongson_spi {
+	struct	spi_controller	*controller;
+	void __iomem		*base;
+	int			cs_active;
+	unsigned int		hz;
+	unsigned char		spcr;
+	unsigned char		sper;
+	unsigned char		spsr;
+	unsigned char		para;
+	unsigned char		sfcs;
+	unsigned char		timi;
+	unsigned int		mode;
+	u64			clk_rate;
+};
+
+int loongson_spi_init_controller(struct device *dev, void __iomem *reg);
+extern const struct dev_pm_ops loongson_spi_dev_pm_ops;
+#endif /* __LINUX_SPI_LOONGSON_H */