[2/2] arm64: dts: ti: k3-j784s4-evm: Add Support for UFS peripheral

Message ID 20230725053843.1721028-3-u-kumar1@ti.com
State New
Headers
Series arm64: dts: ti: k3-j784s4: Add UFS support |

Commit Message

Kumar, Udit July 25, 2023, 5:38 a.m. UTC
  J784S4 EVM board has 32GB Non-Volatile UFS Memory.
So enabling UFS at board level.

UFS flash details are documented in board data sheet[1]
Section 1.2 Key Features and Interfaces.

[1] https://www.ti.com/lit/pdf/spruj62

Cc: Chai Wenle <Wenle.Chai@windriver.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 4 ++++
 1 file changed, 4 insertions(+)
  

Comments

Chai, Wenle July 25, 2023, 9:45 a.m. UTC | #1
On Tue, 25 Jul 2023 at 11:08 Udit Kumar <u-kumar1@ti.com> wrote:

> J784S4 EVM board has 32GB Non-Volatile UFS Memory.
> So enabling UFS at board level.

> UFS flash details are documented in board data sheet[1] Section 1.2 Key Features and Interfaces.
>
> [1] https://www.ti.com/lit/pdf/spruj62
>
> Cc: Chai Wenle <Wenle.Chai@windriver.com>
> Signed-off-by: Udit Kumar <u-kumar1@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> index 7ad152a1b90f..1e38a8f1bec5 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> @@ -430,6 +430,10 @@ &main_uart8 {
>         pinctrl-0 = <&main_uart8_pins_default>;  };
>
> +&ufs_wrapper {
> +       status = "okay";
> +};
> +
>  &fss {
>         status = "okay";
>  };
> --
> 2.34.1

Tested-by: Wenle Chai <Wenle.Chai@windriver.com>

Regards,
Wenle
  

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index 7ad152a1b90f..1e38a8f1bec5 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -430,6 +430,10 @@  &main_uart8 {
 	pinctrl-0 = <&main_uart8_pins_default>;
 };
 
+&ufs_wrapper {
+	status = "okay";
+};
+
 &fss {
 	status = "okay";
 };