vect: Fix SLP layout handling of masked loads [PR106794]
Checks
Commit Message
PR106794 shows that I'd forgotten about masked loads when
doing the SLP layout changes. These loads can't currently
be permuted independently of their mask input, so during
construction they never get a load permutation.
(If we did support permuting masked loads in future, the mask
would need to be in the right order for the load, rather than in
the order implied by the result of the permutation. Since masked
loads can't be partly or fully scalarised in the way that normal
permuted loads can be, there's probably no benefit to fusing the
permutation and the load. Permutation after the fact is probably
good enough.)
Tested on aarch64-linux-gnu & x86_64-linux-gnu. OK to install?
Richard
gcc/
PR tree-optimization/106794
PR tree-optimization/106914
* tree-vect-slp.cc (vect_optimize_slp_pass::internal_node_cost):
Only consider loads that already have a permutation.
(vect_optimize_slp_pass::start_choosing_layouts): Assert that
loads with permutations are leaf nodes. Prevent any kind of grouped
access from changing layout if it doesn't have a load permutation.
gcc/testsuite/
* gcc.dg/vect/pr106914.c: New test.
* g++.dg/vect/pr106794.cc: Likewise.
---
gcc/testsuite/g++.dg/vect/pr106794.cc | 40 +++++++++++++++++++++++++++
gcc/testsuite/gcc.dg/vect/pr106914.c | 15 ++++++++++
gcc/tree-vect-slp.cc | 30 ++++++++++++++------
3 files changed, 77 insertions(+), 8 deletions(-)
create mode 100644 gcc/testsuite/g++.dg/vect/pr106794.cc
create mode 100644 gcc/testsuite/gcc.dg/vect/pr106914.c
Comments
On Fri, 16 Sep 2022, Richard Sandiford wrote:
> PR106794 shows that I'd forgotten about masked loads when
> doing the SLP layout changes. These loads can't currently
> be permuted independently of their mask input, so during
> construction they never get a load permutation.
>
> (If we did support permuting masked loads in future, the mask
> would need to be in the right order for the load, rather than in
> the order implied by the result of the permutation. Since masked
> loads can't be partly or fully scalarised in the way that normal
> permuted loads can be, there's probably no benefit to fusing the
> permutation and the load. Permutation after the fact is probably
> good enough.)
>
> Tested on aarch64-linux-gnu & x86_64-linux-gnu. OK to install?
OK.
Thanks,
Richard.
> Richard
>
>
> gcc/
> PR tree-optimization/106794
> PR tree-optimization/106914
> * tree-vect-slp.cc (vect_optimize_slp_pass::internal_node_cost):
> Only consider loads that already have a permutation.
> (vect_optimize_slp_pass::start_choosing_layouts): Assert that
> loads with permutations are leaf nodes. Prevent any kind of grouped
> access from changing layout if it doesn't have a load permutation.
>
> gcc/testsuite/
> * gcc.dg/vect/pr106914.c: New test.
> * g++.dg/vect/pr106794.cc: Likewise.
> ---
> gcc/testsuite/g++.dg/vect/pr106794.cc | 40 +++++++++++++++++++++++++++
> gcc/testsuite/gcc.dg/vect/pr106914.c | 15 ++++++++++
> gcc/tree-vect-slp.cc | 30 ++++++++++++++------
> 3 files changed, 77 insertions(+), 8 deletions(-)
> create mode 100644 gcc/testsuite/g++.dg/vect/pr106794.cc
> create mode 100644 gcc/testsuite/gcc.dg/vect/pr106914.c
>
> diff --git a/gcc/testsuite/g++.dg/vect/pr106794.cc b/gcc/testsuite/g++.dg/vect/pr106794.cc
> new file mode 100644
> index 00000000000..f056563c4e1
> --- /dev/null
> +++ b/gcc/testsuite/g++.dg/vect/pr106794.cc
> @@ -0,0 +1,40 @@
> +/* { dg-do compile } */
> +/* { dg-additional-options "-Ofast" } */
> +/* { dg-additional-options "-march=bdver2" { target x86_64-*-* i?86-*-* } } */
> +
> +template <class T> struct Vector3 {
> + Vector3();
> + Vector3(T, T, T);
> + T length() const;
> + T x, y, z;
> +};
> +template <class T>
> +Vector3<T>::Vector3(T _x, T _y, T _z) : x(_x), y(_y), z(_z) {}
> +Vector3<float> cross(Vector3<float> a, Vector3<float> b) {
> + return Vector3<float>(a.y * b.z - a.z * b.y, a.z * b.x - a.x * b.z,
> + a.x * b.y - a.y * b.x);
> +}
> +template <class T> T Vector3<T>::length() const { return z; }
> +int generateNormals_i;
> +float generateNormals_p2_0, generateNormals_p0_0;
> +struct SphereMesh {
> + void generateNormals();
> + float vertices;
> +};
> +void SphereMesh::generateNormals() {
> + Vector3<float> *faceNormals = new Vector3<float>;
> + for (int j; j; j++) {
> + float *p0 = &vertices + 3, *p1 = &vertices + j * 3, *p2 = &vertices + 3,
> + *p3 = &vertices + generateNormals_i + j * 3;
> + Vector3<float> v0(p1[0] - generateNormals_p0_0, p1[1] - 1, p1[2] - 2),
> + v1(0, 1, 2);
> + if (v0.length())
> + v1 = Vector3<float>(p3[0] - generateNormals_p2_0, p3[1] - p2[1],
> + p3[2] - p2[2]);
> + else
> + v1 = Vector3<float>(generateNormals_p0_0 - p3[0], p0[1] - p3[1],
> + p0[2] - p3[2]);
> + Vector3<float> faceNormal = cross(v0, v1);
> + faceNormals[j] = faceNormal;
> + }
> +}
> diff --git a/gcc/testsuite/gcc.dg/vect/pr106914.c b/gcc/testsuite/gcc.dg/vect/pr106914.c
> new file mode 100644
> index 00000000000..9d9b3e30081
> --- /dev/null
> +++ b/gcc/testsuite/gcc.dg/vect/pr106914.c
> @@ -0,0 +1,15 @@
> +/* { dg-do compile } */
> +/* { dg-additional-options "-fprofile-generate" } */
> +/* { dg-additional-options "-mavx512vl" { target x86_64-*-* i?86-*-* } } */
> +
> +int *mask_slp_int64_t_8_2_x, *mask_slp_int64_t_8_2_y, *mask_slp_int64_t_8_2_z;
> +
> +void
> +__attribute__mask_slp_int64_t_8_2() {
> + for (int i; i; i += 8) {
> + mask_slp_int64_t_8_2_x[i + 6] =
> + mask_slp_int64_t_8_2_y[i + 6] ? mask_slp_int64_t_8_2_z[i] : 1;
> + mask_slp_int64_t_8_2_x[i + 7] =
> + mask_slp_int64_t_8_2_y[i + 7] ? mask_slp_int64_t_8_2_z[i + 7] : 2;
> + }
> +}
> diff --git a/gcc/tree-vect-slp.cc b/gcc/tree-vect-slp.cc
> index ca3422c2a1e..229f2663ebc 100644
> --- a/gcc/tree-vect-slp.cc
> +++ b/gcc/tree-vect-slp.cc
> @@ -4494,7 +4494,8 @@ vect_optimize_slp_pass::internal_node_cost (slp_tree node, int in_layout_i,
> stmt_vec_info rep = SLP_TREE_REPRESENTATIVE (node);
> if (rep
> && STMT_VINFO_DATA_REF (rep)
> - && DR_IS_READ (STMT_VINFO_DATA_REF (rep)))
> + && DR_IS_READ (STMT_VINFO_DATA_REF (rep))
> + && SLP_TREE_LOAD_PERMUTATION (node).exists ())
> {
> auto_load_permutation_t tmp_perm;
> tmp_perm.safe_splice (SLP_TREE_LOAD_PERMUTATION (node));
> @@ -4569,8 +4570,12 @@ vect_optimize_slp_pass::start_choosing_layouts ()
> if (SLP_TREE_LOAD_PERMUTATION (node).exists ())
> {
> /* If splitting out a SLP_TREE_LANE_PERMUTATION can make the node
> - unpermuted, record a layout that reverses this permutation. */
> - gcc_assert (partition.layout == 0);
> + unpermuted, record a layout that reverses this permutation.
> +
> + We would need more work to cope with loads that are internally
> + permuted and also have inputs (such as masks for
> + IFN_MASK_LOADs). */
> + gcc_assert (partition.layout == 0 && !m_slpg->vertices[node_i].succ);
> if (!STMT_VINFO_GROUPED_ACCESS (dr_stmt))
> continue;
> dr_stmt = DR_GROUP_FIRST_ELEMENT (dr_stmt);
> @@ -4684,12 +4689,21 @@ vect_optimize_slp_pass::start_choosing_layouts ()
> vertex.weight = vect_slp_node_weight (node);
>
> /* We do not handle stores with a permutation, so all
> - incoming permutations must have been materialized. */
> + incoming permutations must have been materialized.
> +
> + We also don't handle masked grouped loads, which lack a
> + permutation vector. In this case the memory locations
> + form an implicit second input to the loads, on top of the
> + explicit mask input, and the memory input's layout cannot
> + be changed.
> +
> + On the other hand, we do support permuting gather loads and
> + masked gather loads, where each scalar load is independent
> + of the others. This can be useful if the address/index input
> + benefits from permutation. */
> if (STMT_VINFO_DATA_REF (rep)
> - && DR_IS_WRITE (STMT_VINFO_DATA_REF (rep)))
> - /* ??? We're forcing materialization in place
> - of the child here, we'd need special handling
> - in materialization to leave layout -1 here. */
> + && STMT_VINFO_GROUPED_ACCESS (rep)
> + && !SLP_TREE_LOAD_PERMUTATION (node).exists ())
> partition.layout = 0;
>
> /* We cannot change the layout of an operation that is
> --
> 2.25.1
>
>
new file mode 100644
@@ -0,0 +1,40 @@
+/* { dg-do compile } */
+/* { dg-additional-options "-Ofast" } */
+/* { dg-additional-options "-march=bdver2" { target x86_64-*-* i?86-*-* } } */
+
+template <class T> struct Vector3 {
+ Vector3();
+ Vector3(T, T, T);
+ T length() const;
+ T x, y, z;
+};
+template <class T>
+Vector3<T>::Vector3(T _x, T _y, T _z) : x(_x), y(_y), z(_z) {}
+Vector3<float> cross(Vector3<float> a, Vector3<float> b) {
+ return Vector3<float>(a.y * b.z - a.z * b.y, a.z * b.x - a.x * b.z,
+ a.x * b.y - a.y * b.x);
+}
+template <class T> T Vector3<T>::length() const { return z; }
+int generateNormals_i;
+float generateNormals_p2_0, generateNormals_p0_0;
+struct SphereMesh {
+ void generateNormals();
+ float vertices;
+};
+void SphereMesh::generateNormals() {
+ Vector3<float> *faceNormals = new Vector3<float>;
+ for (int j; j; j++) {
+ float *p0 = &vertices + 3, *p1 = &vertices + j * 3, *p2 = &vertices + 3,
+ *p3 = &vertices + generateNormals_i + j * 3;
+ Vector3<float> v0(p1[0] - generateNormals_p0_0, p1[1] - 1, p1[2] - 2),
+ v1(0, 1, 2);
+ if (v0.length())
+ v1 = Vector3<float>(p3[0] - generateNormals_p2_0, p3[1] - p2[1],
+ p3[2] - p2[2]);
+ else
+ v1 = Vector3<float>(generateNormals_p0_0 - p3[0], p0[1] - p3[1],
+ p0[2] - p3[2]);
+ Vector3<float> faceNormal = cross(v0, v1);
+ faceNormals[j] = faceNormal;
+ }
+}
new file mode 100644
@@ -0,0 +1,15 @@
+/* { dg-do compile } */
+/* { dg-additional-options "-fprofile-generate" } */
+/* { dg-additional-options "-mavx512vl" { target x86_64-*-* i?86-*-* } } */
+
+int *mask_slp_int64_t_8_2_x, *mask_slp_int64_t_8_2_y, *mask_slp_int64_t_8_2_z;
+
+void
+__attribute__mask_slp_int64_t_8_2() {
+ for (int i; i; i += 8) {
+ mask_slp_int64_t_8_2_x[i + 6] =
+ mask_slp_int64_t_8_2_y[i + 6] ? mask_slp_int64_t_8_2_z[i] : 1;
+ mask_slp_int64_t_8_2_x[i + 7] =
+ mask_slp_int64_t_8_2_y[i + 7] ? mask_slp_int64_t_8_2_z[i + 7] : 2;
+ }
+}
@@ -4494,7 +4494,8 @@ vect_optimize_slp_pass::internal_node_cost (slp_tree node, int in_layout_i,
stmt_vec_info rep = SLP_TREE_REPRESENTATIVE (node);
if (rep
&& STMT_VINFO_DATA_REF (rep)
- && DR_IS_READ (STMT_VINFO_DATA_REF (rep)))
+ && DR_IS_READ (STMT_VINFO_DATA_REF (rep))
+ && SLP_TREE_LOAD_PERMUTATION (node).exists ())
{
auto_load_permutation_t tmp_perm;
tmp_perm.safe_splice (SLP_TREE_LOAD_PERMUTATION (node));
@@ -4569,8 +4570,12 @@ vect_optimize_slp_pass::start_choosing_layouts ()
if (SLP_TREE_LOAD_PERMUTATION (node).exists ())
{
/* If splitting out a SLP_TREE_LANE_PERMUTATION can make the node
- unpermuted, record a layout that reverses this permutation. */
- gcc_assert (partition.layout == 0);
+ unpermuted, record a layout that reverses this permutation.
+
+ We would need more work to cope with loads that are internally
+ permuted and also have inputs (such as masks for
+ IFN_MASK_LOADs). */
+ gcc_assert (partition.layout == 0 && !m_slpg->vertices[node_i].succ);
if (!STMT_VINFO_GROUPED_ACCESS (dr_stmt))
continue;
dr_stmt = DR_GROUP_FIRST_ELEMENT (dr_stmt);
@@ -4684,12 +4689,21 @@ vect_optimize_slp_pass::start_choosing_layouts ()
vertex.weight = vect_slp_node_weight (node);
/* We do not handle stores with a permutation, so all
- incoming permutations must have been materialized. */
+ incoming permutations must have been materialized.
+
+ We also don't handle masked grouped loads, which lack a
+ permutation vector. In this case the memory locations
+ form an implicit second input to the loads, on top of the
+ explicit mask input, and the memory input's layout cannot
+ be changed.
+
+ On the other hand, we do support permuting gather loads and
+ masked gather loads, where each scalar load is independent
+ of the others. This can be useful if the address/index input
+ benefits from permutation. */
if (STMT_VINFO_DATA_REF (rep)
- && DR_IS_WRITE (STMT_VINFO_DATA_REF (rep)))
- /* ??? We're forcing materialization in place
- of the child here, we'd need special handling
- in materialization to leave layout -1 here. */
+ && STMT_VINFO_GROUPED_ACCESS (rep)
+ && !SLP_TREE_LOAD_PERMUTATION (node).exists ())
partition.layout = 0;
/* We cannot change the layout of an operation that is