[COMMITTED,range-op-float] Abstract out binary operator code out of PLUS_EXPR entry.
Checks
Commit Message
The PLUS_EXPR was always meant to be a template for further
development, since most of the binary operators will share a similar
structure. This patch abstracts out the common bits into the default
definition for range_operator_float::fold_range() and provides an
rv_fold() to be implemented by the individual entries wishing to use
the generic folder. This is akin to what we do with fold_range() and
wi_fold() in the integer version of range-ops.
gcc/ChangeLog:
* range-op-float.cc (range_operator_float::fold_range): Abstract
out from foperator_plus.
(range_operator_float::rv_fold): New.
(foperator_plus::fold_range): Remove.
(foperator_plus::rv_fold): New.
(propagate_nans): Remove.
* range-op.h (class range_operator_float): Add rv_fold.
---
gcc/range-op-float.cc | 156 +++++++++++++++++++++---------------------
gcc/range-op.h | 7 ++
2 files changed, 84 insertions(+), 79 deletions(-)
Comments
On Wed, Nov 09, 2022 at 08:07:57AM +0100, Aldy Hernandez wrote:
> The PLUS_EXPR was always meant to be a template for further
> development, since most of the binary operators will share a similar
> structure. This patch abstracts out the common bits into the default
> definition for range_operator_float::fold_range() and provides an
> rv_fold() to be implemented by the individual entries wishing to use
> the generic folder. This is akin to what we do with fold_range() and
> wi_fold() in the integer version of range-ops.
Shouldn't foperator_mult be very similar to this (except that until
division is done op[12]_range can't be implemented), with the exception
that the invalid case isn't -INF + INF or INF + -INF, but
0 * +/-INF or +/-INF * 0?
Jakub
On Wed, Nov 9, 2022 at 1:48 PM Jakub Jelinek <jakub@redhat.com> wrote:
>
> On Wed, Nov 09, 2022 at 08:07:57AM +0100, Aldy Hernandez wrote:
> > The PLUS_EXPR was always meant to be a template for further
> > development, since most of the binary operators will share a similar
> > structure. This patch abstracts out the common bits into the default
> > definition for range_operator_float::fold_range() and provides an
> > rv_fold() to be implemented by the individual entries wishing to use
> > the generic folder. This is akin to what we do with fold_range() and
> > wi_fold() in the integer version of range-ops.
>
> Shouldn't foperator_mult be very similar to this (except that until
> division is done op[12]_range can't be implemented), with the exception
> that the invalid case isn't -INF + INF or INF + -INF, but
> 0 * +/-INF or +/-INF * 0?
Multiplication and division are tricky because you have to keep track
of signs to order the resulting range. It's the most annoying pattern
we have for integers:
// Multiplications, divisions and shifts are a bit tricky to handle,
// depending on the mix of signs we have in the two ranges, we need to
// operate on different values to get the minimum and maximum values
// for the new range. One approach is to figure out all the
// variations of range combinations and do the operations.
//
// However, this involves several calls to compare_values and it is
// pretty convoluted. It's simpler to do the 4 operations (MIN0 OP
// MIN1, MIN0 OP MAX1, MAX0 OP MIN1 and MAX0 OP MAX0 OP MAX1) and then
// figure the smallest and largest values to form the new range.
But if you have a simpler approach, have at it. I may have to bail on
multiplication and division for this cycle, cause I'm running out of
cycles :-/.
Hmmm...even if we don't get to implement mult/div in this cycle,
perhaps we could at least figure out if we'll NAN as you've suggested
above. So, set [-INF,+INF] but without a NAN when applicable.
Aldy
On Wed, Nov 09, 2022 at 02:14:19PM +0100, Aldy Hernandez wrote:
> On Wed, Nov 9, 2022 at 1:48 PM Jakub Jelinek <jakub@redhat.com> wrote:
> >
> > On Wed, Nov 09, 2022 at 08:07:57AM +0100, Aldy Hernandez wrote:
> > > The PLUS_EXPR was always meant to be a template for further
> > > development, since most of the binary operators will share a similar
> > > structure. This patch abstracts out the common bits into the default
> > > definition for range_operator_float::fold_range() and provides an
> > > rv_fold() to be implemented by the individual entries wishing to use
> > > the generic folder. This is akin to what we do with fold_range() and
> > > wi_fold() in the integer version of range-ops.
> >
> > Shouldn't foperator_mult be very similar to this (except that until
> > division is done op[12]_range can't be implemented), with the exception
> > that the invalid case isn't -INF + INF or INF + -INF, but
> > 0 * +/-INF or +/-INF * 0?
>
> Multiplication and division are tricky because you have to keep track
> of signs to order the resulting range. It's the most annoying pattern
> we have for integers:
Ah, you're right.
Reminds me of check_for_binary_op_overflow for multiplication.
Jakub
On Wed, Nov 09, 2022 at 02:32:55PM +0100, Jakub Jelinek wrote:
> On Wed, Nov 09, 2022 at 02:14:19PM +0100, Aldy Hernandez wrote:
> > On Wed, Nov 9, 2022 at 1:48 PM Jakub Jelinek <jakub@redhat.com> wrote:
> > >
> > > On Wed, Nov 09, 2022 at 08:07:57AM +0100, Aldy Hernandez wrote:
> > > > The PLUS_EXPR was always meant to be a template for further
> > > > development, since most of the binary operators will share a similar
> > > > structure. This patch abstracts out the common bits into the default
> > > > definition for range_operator_float::fold_range() and provides an
> > > > rv_fold() to be implemented by the individual entries wishing to use
> > > > the generic folder. This is akin to what we do with fold_range() and
> > > > wi_fold() in the integer version of range-ops.
> > >
> > > Shouldn't foperator_mult be very similar to this (except that until
> > > division is done op[12]_range can't be implemented), with the exception
> > > that the invalid case isn't -INF + INF or INF + -INF, but
> > > 0 * +/-INF or +/-INF * 0?
> >
> > Multiplication and division are tricky because you have to keep track
> > of signs to order the resulting range. It's the most annoying pattern
> > we have for integers:
>
> Ah, you're right.
> Reminds me of check_for_binary_op_overflow for multiplication.
On the other side, thinking more about it, it should be easier than
integral, because we don't need to deal with unsigned/wrap around and
overflows aren't undefined, but infinities (though I guess we still have
even for +/- the question how actually say PDP floats or ARM non-IEEE
mode __fp16 behave on overflows for floats that don't support infinities,
if it is saturating on HUGE_VAL*/-HUGE_VAL* or wraps around).
So just do the cross products, sort them to create the final range,
clear_nans on it and provide nans the normal way?
Jakub
@@ -49,13 +49,66 @@ along with GCC; see the file COPYING3. If not see
// Default definitions for floating point operators.
bool
-range_operator_float::fold_range (frange &r ATTRIBUTE_UNUSED,
- tree type ATTRIBUTE_UNUSED,
- const frange &lh ATTRIBUTE_UNUSED,
- const frange &rh ATTRIBUTE_UNUSED,
+range_operator_float::fold_range (frange &r, tree type,
+ const frange &op1, const frange &op2,
relation_trio) const
{
- return false;
+ if (empty_range_varying (r, type, op1, op2))
+ return true;
+ if (op1.known_isnan () || op2.known_isnan ())
+ {
+ r.set_nan (op1.type ());
+ return true;
+ }
+
+ REAL_VALUE_TYPE lb, ub;
+ bool maybe_nan;
+ rv_fold (lb, ub, maybe_nan, type,
+ op1.lower_bound (), op1.upper_bound (),
+ op2.lower_bound (), op2.upper_bound ());
+
+ // Handle possible NANs by saturating to the appropriate INF if only
+ // one end is a NAN. If both ends are a NAN, just return a NAN.
+ bool lb_nan = real_isnan (&lb);
+ bool ub_nan = real_isnan (&ub);
+ if (lb_nan && ub_nan)
+ {
+ r.set_nan (type);
+ return true;
+ }
+ if (lb_nan)
+ lb = dconstninf;
+ else if (ub_nan)
+ ub = dconstinf;
+
+ r.set (type, lb, ub);
+
+ if (lb_nan || ub_nan || maybe_nan)
+ // Keep the default NAN (with a varying sign) set by the setter.
+ ;
+ else if (!op1.maybe_isnan () && !op2.maybe_isnan ())
+ r.clear_nan ();
+
+ return true;
+}
+
+// For a given operation, fold two sets of ranges into [lb, ub].
+// MAYBE_NAN is set to TRUE if, in addition to any result in LB or
+// UB, the final range has the possiblity of a NAN.
+void
+range_operator_float::rv_fold (REAL_VALUE_TYPE &lb,
+ REAL_VALUE_TYPE &ub,
+ bool &maybe_nan,
+ tree type ATTRIBUTE_UNUSED,
+ const REAL_VALUE_TYPE &lh_lb ATTRIBUTE_UNUSED,
+ const REAL_VALUE_TYPE &lh_ub ATTRIBUTE_UNUSED,
+ const REAL_VALUE_TYPE &rh_lb ATTRIBUTE_UNUSED,
+ const REAL_VALUE_TYPE &rh_ub ATTRIBUTE_UNUSED)
+ const
+{
+ lb = dconstninf;
+ ub = dconstinf;
+ maybe_nan = true;
}
bool
@@ -192,19 +245,6 @@ frelop_early_resolve (irange &r, tree type,
&& relop_early_resolve (r, type, op1, op2, rel, my_rel));
}
-// If either operand is a NAN, set R to NAN and return TRUE.
-
-inline bool
-propagate_nans (frange &r, const frange &op1, const frange &op2)
-{
- if (op1.known_isnan () || op2.known_isnan ())
- {
- r.set_nan (op1.type ());
- return true;
- }
- return false;
-}
-
// Set VALUE to its next real value, or INF if the operation overflows.
inline void
@@ -1822,69 +1862,27 @@ foperator_unordered_equal::op1_range (frange &r, tree type,
class foperator_plus : public range_operator_float
{
- using range_operator_float::fold_range;
-
-public:
- bool fold_range (frange &r, tree type,
- const frange &lh,
- const frange &rh,
- relation_trio = TRIO_VARYING) const final override;
+ void rv_fold (REAL_VALUE_TYPE &lb, REAL_VALUE_TYPE &ub, bool &maybe_nan,
+ tree type,
+ const REAL_VALUE_TYPE &lh_lb,
+ const REAL_VALUE_TYPE &lh_ub,
+ const REAL_VALUE_TYPE &rh_lb,
+ const REAL_VALUE_TYPE &rh_ub) const final override
+ {
+ frange_arithmetic (PLUS_EXPR, type, lb, lh_lb, rh_lb, dconstninf);
+ frange_arithmetic (PLUS_EXPR, type, ub, lh_ub, rh_ub, dconstinf);
+
+ // [-INF] + [+INF] = NAN
+ if (real_isinf (&lh_lb, true) && real_isinf (&rh_ub, false))
+ maybe_nan = true;
+ // [+INF] + [-INF] = NAN
+ else if (real_isinf (&lh_ub, false) && real_isinf (&rh_lb, true))
+ maybe_nan = true;
+ else
+ maybe_nan = false;
+ }
} fop_plus;
-bool
-foperator_plus::fold_range (frange &r, tree type,
- const frange &op1, const frange &op2,
- relation_trio) const
-{
- if (empty_range_varying (r, type, op1, op2))
- return true;
- if (propagate_nans (r, op1, op2))
- return true;
-
- REAL_VALUE_TYPE lb, ub;
- frange_arithmetic (PLUS_EXPR, type, lb,
- op1.lower_bound (), op2.lower_bound (), dconstninf);
- frange_arithmetic (PLUS_EXPR, type, ub,
- op1.upper_bound (), op2.upper_bound (), dconstinf);
-
- // Handle possible NANs by saturating to the appropriate INF if only
- // one end is a NAN. If both ends are a NAN, just return a NAN.
- bool lb_nan = real_isnan (&lb);
- bool ub_nan = real_isnan (&ub);
- if (lb_nan && ub_nan)
- {
- r.set_nan (type);
- return true;
- }
- if (lb_nan)
- lb = dconstninf;
- else if (ub_nan)
- ub = dconstinf;
-
- r.set (type, lb, ub);
-
- // Some combinations can yield a NAN even if no operands have the
- // possibility of a NAN.
- bool maybe_nan;
- // [-INF] + [+INF] = NAN
- if (real_isinf (&op1.lower_bound (), true)
- && real_isinf (&op2.upper_bound (), false))
- maybe_nan = true;
- // [+INF] + [-INF] = NAN
- else if (real_isinf (&op1.upper_bound (), false)
- && real_isinf (&op2.lower_bound (), true))
- maybe_nan = true;
- else
- maybe_nan = false;
-
- if (lb_nan || ub_nan || maybe_nan)
- // Keep the default NAN (with a varying sign) set by the setter.
- ;
- else if (!op1.maybe_isnan () && !op2.maybe_isnan ())
- r.clear_nan ();
-
- return true;
-}
// Instantiate a range_op_table for floating point operations.
static floating_op_table global_floating_table;
@@ -117,6 +117,13 @@ public:
const frange &lh,
const frange &rh,
relation_trio = TRIO_VARYING) const;
+ virtual void rv_fold (REAL_VALUE_TYPE &lb, REAL_VALUE_TYPE &ub,
+ bool &maybe_nan,
+ tree type,
+ const REAL_VALUE_TYPE &lh_lb,
+ const REAL_VALUE_TYPE &lh_ub,
+ const REAL_VALUE_TYPE &rh_lb,
+ const REAL_VALUE_TYPE &rh_ub) const;
// Unary operations have the range of the LHS as op2.
virtual bool fold_range (irange &r, tree type,
const frange &lh,