[1/2] ARM: dts: marvell: add missing space before {
Commit Message
Add missing whitespace between node name/label and opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
arch/arm/boot/dts/marvell/armada-382-rd-ac3x-48g4x2xl.dts | 6 +++---
arch/arm/boot/dts/marvell/kirkwood-l-50.dts | 4 ++--
arch/arm/boot/dts/marvell/pxa168.dtsi | 2 +-
arch/arm/boot/dts/marvell/pxa910.dtsi | 2 +-
4 files changed, 7 insertions(+), 7 deletions(-)
Comments
On Wed, Jul 05, 2023 at 05:00:17PM +0200, Krzysztof Kozlowski wrote:
> Add missing whitespace between node name/label and opening {.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
Andrew Lunn <andrew@lunn.ch> writes:
> On Wed, Jul 05, 2023 at 05:00:17PM +0200, Krzysztof Kozlowski wrote:
>> Add missing whitespace between node name/label and opening {.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
>
> Andrew
Applied on mvebu/dt
Thanks,
Gregory
@@ -40,7 +40,7 @@ &i2c0 {
pinctrl-0 = <&i2c0_pins>;
status = "okay";
- eeprom@53{
+ eeprom@53 {
compatible = "atmel,24c64";
reg = <0x53>;
};
@@ -95,11 +95,11 @@ partition@0 {
reg = <0x00000000 0x00500000>;
label = "u-boot";
};
- partition@500000{
+ partition@500000 {
reg = <0x00500000 0x00400000>;
label = "u-boot env";
};
- partition@900000{
+ partition@900000 {
reg = <0x00900000 0x3F700000>;
label = "user";
};
@@ -62,7 +62,7 @@ i2c@11000 {
status = "okay";
clock-frequency = <400000>;
- gpio2: gpio-expander@20{
+ gpio2: gpio-expander@20 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
compatible = "semtech,sx1505q";
@@ -76,7 +76,7 @@ gpio2: gpio-expander@20{
* 5: mPCIE reset (active low)
* 6: Express card reset (active low)
*/
- gpio3: gpio-expander@21{
+ gpio3: gpio-expander@21 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
compatible = "semtech,sx1505q";
@@ -153,7 +153,7 @@ rtc: rtc@d4010000 {
};
};
- soc_clocks: clocks{
+ soc_clocks: clocks {
compatible = "marvell,pxa168-clock";
reg = <0xd4050000 0x1000>,
<0xd4282800 0x400>,
@@ -163,7 +163,7 @@ rtc: rtc@d4010000 {
};
};
- soc_clocks: clocks{
+ soc_clocks: clocks {
compatible = "marvell,pxa910-clock";
reg = <0xd4050000 0x1000>,
<0xd4282800 0x400>,