[1/2] ata: ahci (gcc13): use BIT() for bit definitions in enum

  gcc13 now uses the type of the enum for all its members [1]. Given the
ata enum defines its members using both unsigned and signed ints, the
type of the enum is promoted to long.

Make sure most the members are unsigned ints using the BIT() macro. The
rest will be converted separately in the next patch.

The error in question is for example this:
drivers/block/mtip32xx/mtip32xx.c:722:25: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'long in'

[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36113

Cc: Martin Liska <mliska@suse.cz>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Cc: linux-ide@vger.kernel.org
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
---
 drivers/ata/ahci.h | 220 ++++++++++++++++++++++-----------------------
 1 file changed, 110 insertions(+), 110 deletions(-)
  

On 10/31/22 20:43, Jiri Slaby (SUSE) wrote:
> gcc13 now uses the type of the enum for all its members [1]. Given the
> ata enum defines its members using both unsigned and signed ints, the
> type of the enum is promoted to long.
> 
> Make sure most the members are unsigned ints using the BIT() macro. The
> rest will be converted separately in the next patch.
> 
> The error in question is for example this:
> drivers/block/mtip32xx/mtip32xx.c:722:25: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'long in'

This is not an ATA driver. Any example of a compile warning/error for
libata and ata drivers ?

> 
> [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36113
> 
> Cc: Martin Liska <mliska@suse.cz>
> Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
> Cc: linux-ide@vger.kernel.org
> Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
> ---
>  drivers/ata/ahci.h | 220 ++++++++++++++++++++++-----------------------
>  1 file changed, 110 insertions(+), 110 deletions(-)
> 
> diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
> index 7add8e79912b..94b5c81f08dd 100644
> --- a/drivers/ata/ahci.h
> +++ b/drivers/ata/ahci.h
> @@ -53,12 +53,12 @@ enum {
>  	AHCI_PORT_PRIV_FBS_DMA_SZ	= AHCI_CMD_SLOT_SZ +
>  					  AHCI_CMD_TBL_AR_SZ +
>  					  (AHCI_RX_FIS_SZ * 16),
> -	AHCI_IRQ_ON_SG		= (1 << 31),
> -	AHCI_CMD_ATAPI		= (1 << 5),
> -	AHCI_CMD_WRITE		= (1 << 6),
> -	AHCI_CMD_PREFETCH	= (1 << 7),
> -	AHCI_CMD_RESET		= (1 << 8),
> -	AHCI_CMD_CLR_BUSY	= (1 << 10),
> +	AHCI_IRQ_ON_SG		= BIT(31),
> +	AHCI_CMD_ATAPI		= BIT(5),
> +	AHCI_CMD_WRITE		= BIT(6),
> +	AHCI_CMD_PREFETCH	= BIT(7),
> +	AHCI_CMD_RESET		= BIT(8),
> +	AHCI_CMD_CLR_BUSY	= BIT(10),
>  
>  	RX_FIS_PIO_SETUP	= 0x20,	/* offset of PIO Setup FIS data */
>  	RX_FIS_D2H_REG		= 0x40,	/* offset of D2H Register FIS data */
> @@ -76,37 +76,37 @@ enum {
>  	HOST_CAP2		= 0x24, /* host capabilities, extended */
>  
>  	/* HOST_CTL bits */
> -	HOST_RESET		= (1 << 0),  /* reset controller; self-clear */
> -	HOST_IRQ_EN		= (1 << 1),  /* global IRQ enable */
> -	HOST_MRSM		= (1 << 2),  /* MSI Revert to Single Message */
> -	HOST_AHCI_EN		= (1 << 31), /* AHCI enabled */
> +	HOST_RESET		= BIT(0),  /* reset controller; self-clear */
> +	HOST_IRQ_EN		= BIT(1),  /* global IRQ enable */
> +	HOST_MRSM		= BIT(2),  /* MSI Revert to Single Message */
> +	HOST_AHCI_EN		= BIT(31), /* AHCI enabled */
>  
>  	/* HOST_CAP bits */
> -	HOST_CAP_SXS		= (1 << 5),  /* Supports External SATA */
> -	HOST_CAP_EMS		= (1 << 6),  /* Enclosure Management support */
> -	HOST_CAP_CCC		= (1 << 7),  /* Command Completion Coalescing */
> -	HOST_CAP_PART		= (1 << 13), /* Partial state capable */
> -	HOST_CAP_SSC		= (1 << 14), /* Slumber state capable */
> -	HOST_CAP_PIO_MULTI	= (1 << 15), /* PIO multiple DRQ support */
> -	HOST_CAP_FBS		= (1 << 16), /* FIS-based switching support */
> -	HOST_CAP_PMP		= (1 << 17), /* Port Multiplier support */
> -	HOST_CAP_ONLY		= (1 << 18), /* Supports AHCI mode only */
> -	HOST_CAP_CLO		= (1 << 24), /* Command List Override support */
> -	HOST_CAP_LED		= (1 << 25), /* Supports activity LED */
> -	HOST_CAP_ALPM		= (1 << 26), /* Aggressive Link PM support */
> -	HOST_CAP_SSS		= (1 << 27), /* Staggered Spin-up */
> -	HOST_CAP_MPS		= (1 << 28), /* Mechanical presence switch */
> -	HOST_CAP_SNTF		= (1 << 29), /* SNotification register */
> -	HOST_CAP_NCQ		= (1 << 30), /* Native Command Queueing */
> -	HOST_CAP_64		= (1 << 31), /* PCI DAC (64-bit DMA) support */
> +	HOST_CAP_SXS		= BIT(5),  /* Supports External SATA */
> +	HOST_CAP_EMS		= BIT(6),  /* Enclosure Management support */
> +	HOST_CAP_CCC		= BIT(7),  /* Command Completion Coalescing */
> +	HOST_CAP_PART		= BIT(13), /* Partial state capable */
> +	HOST_CAP_SSC		= BIT(14), /* Slumber state capable */
> +	HOST_CAP_PIO_MULTI	= BIT(15), /* PIO multiple DRQ support */
> +	HOST_CAP_FBS		= BIT(16), /* FIS-based switching support */
> +	HOST_CAP_PMP		= BIT(17), /* Port Multiplier support */
> +	HOST_CAP_ONLY		= BIT(18), /* Supports AHCI mode only */
> +	HOST_CAP_CLO		= BIT(24), /* Command List Override support */
> +	HOST_CAP_LED		= BIT(25), /* Supports activity LED */
> +	HOST_CAP_ALPM		= BIT(26), /* Aggressive Link PM support */
> +	HOST_CAP_SSS		= BIT(27), /* Staggered Spin-up */
> +	HOST_CAP_MPS		= BIT(28), /* Mechanical presence switch */
> +	HOST_CAP_SNTF		= BIT(29), /* SNotification register */
> +	HOST_CAP_NCQ		= BIT(30), /* Native Command Queueing */
> +	HOST_CAP_64		= BIT(31), /* PCI DAC (64-bit DMA) support */
>  
>  	/* HOST_CAP2 bits */
> -	HOST_CAP2_BOH		= (1 << 0),  /* BIOS/OS handoff supported */
> -	HOST_CAP2_NVMHCI	= (1 << 1),  /* NVMHCI supported */
> -	HOST_CAP2_APST		= (1 << 2),  /* Automatic partial to slumber */
> -	HOST_CAP2_SDS		= (1 << 3),  /* Support device sleep */
> -	HOST_CAP2_SADM		= (1 << 4),  /* Support aggressive DevSlp */
> -	HOST_CAP2_DESO		= (1 << 5),  /* DevSlp from slumber only */
> +	HOST_CAP2_BOH		= BIT(0),  /* BIOS/OS handoff supported */
> +	HOST_CAP2_NVMHCI	= BIT(1),  /* NVMHCI supported */
> +	HOST_CAP2_APST		= BIT(2),  /* Automatic partial to slumber */
> +	HOST_CAP2_SDS		= BIT(3),  /* Support device sleep */
> +	HOST_CAP2_SADM		= BIT(4),  /* Support aggressive DevSlp */
> +	HOST_CAP2_DESO		= BIT(5),  /* DevSlp from slumber only */
>  
>  	/* registers for each SATA port */
>  	PORT_LST_ADDR		= 0x00, /* command list DMA addr */
> @@ -128,24 +128,24 @@ enum {
>  	PORT_DEVSLP		= 0x44, /* device sleep */
>  
>  	/* PORT_IRQ_{STAT,MASK} bits */
> -	PORT_IRQ_COLD_PRES	= (1 << 31), /* cold presence detect */
> -	PORT_IRQ_TF_ERR		= (1 << 30), /* task file error */
> -	PORT_IRQ_HBUS_ERR	= (1 << 29), /* host bus fatal error */
> -	PORT_IRQ_HBUS_DATA_ERR	= (1 << 28), /* host bus data error */
> -	PORT_IRQ_IF_ERR		= (1 << 27), /* interface fatal error */
> -	PORT_IRQ_IF_NONFATAL	= (1 << 26), /* interface non-fatal error */
> -	PORT_IRQ_OVERFLOW	= (1 << 24), /* xfer exhausted available S/G */
> -	PORT_IRQ_BAD_PMP	= (1 << 23), /* incorrect port multiplier */
> -
> -	PORT_IRQ_PHYRDY		= (1 << 22), /* PhyRdy changed */
> -	PORT_IRQ_DMPS		= (1 << 7), /* mechanical presence status */
> -	PORT_IRQ_CONNECT	= (1 << 6), /* port connect change status */
> -	PORT_IRQ_SG_DONE	= (1 << 5), /* descriptor processed */
> -	PORT_IRQ_UNK_FIS	= (1 << 4), /* unknown FIS rx'd */
> -	PORT_IRQ_SDB_FIS	= (1 << 3), /* Set Device Bits FIS rx'd */
> -	PORT_IRQ_DMAS_FIS	= (1 << 2), /* DMA Setup FIS rx'd */
> -	PORT_IRQ_PIOS_FIS	= (1 << 1), /* PIO Setup FIS rx'd */
> -	PORT_IRQ_D2H_REG_FIS	= (1 << 0), /* D2H Register FIS rx'd */
> +	PORT_IRQ_COLD_PRES	= BIT(31), /* cold presence detect */
> +	PORT_IRQ_TF_ERR		= BIT(30), /* task file error */
> +	PORT_IRQ_HBUS_ERR	= BIT(29), /* host bus fatal error */
> +	PORT_IRQ_HBUS_DATA_ERR	= BIT(28), /* host bus data error */
> +	PORT_IRQ_IF_ERR		= BIT(27), /* interface fatal error */
> +	PORT_IRQ_IF_NONFATAL	= BIT(26), /* interface non-fatal error */
> +	PORT_IRQ_OVERFLOW	= BIT(24), /* xfer exhausted available S/G */
> +	PORT_IRQ_BAD_PMP	= BIT(23), /* incorrect port multiplier */
> +
> +	PORT_IRQ_PHYRDY		= BIT(22), /* PhyRdy changed */
> +	PORT_IRQ_DMPS		= BIT(7), /* mechanical presence status */
> +	PORT_IRQ_CONNECT	= BIT(6), /* port connect change status */
> +	PORT_IRQ_SG_DONE	= BIT(5), /* descriptor processed */
> +	PORT_IRQ_UNK_FIS	= BIT(4), /* unknown FIS rx'd */
> +	PORT_IRQ_SDB_FIS	= BIT(3), /* Set Device Bits FIS rx'd */
> +	PORT_IRQ_DMAS_FIS	= BIT(2), /* DMA Setup FIS rx'd */
> +	PORT_IRQ_PIOS_FIS	= BIT(1), /* PIO Setup FIS rx'd */
> +	PORT_IRQ_D2H_REG_FIS	= BIT(0), /* D2H Register FIS rx'd */
>  
>  	PORT_IRQ_FREEZE		= PORT_IRQ_HBUS_ERR |
>  				  PORT_IRQ_IF_ERR |
> @@ -161,22 +161,22 @@ enum {
>  				  PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
>  
>  	/* PORT_CMD bits */
> -	PORT_CMD_ASP		= (1 << 27), /* Aggressive Slumber/Partial */
> -	PORT_CMD_ALPE		= (1 << 26), /* Aggressive Link PM enable */
> -	PORT_CMD_ATAPI		= (1 << 24), /* Device is ATAPI */
> -	PORT_CMD_FBSCP		= (1 << 22), /* FBS Capable Port */
> -	PORT_CMD_ESP		= (1 << 21), /* External Sata Port */
> -	PORT_CMD_CPD		= (1 << 20), /* Cold Presence Detection */
> -	PORT_CMD_MPSP		= (1 << 19), /* Mechanical Presence Switch */
> -	PORT_CMD_HPCP		= (1 << 18), /* HotPlug Capable Port */
> -	PORT_CMD_PMP		= (1 << 17), /* PMP attached */
> -	PORT_CMD_LIST_ON	= (1 << 15), /* cmd list DMA engine running */
> -	PORT_CMD_FIS_ON		= (1 << 14), /* FIS DMA engine running */
> -	PORT_CMD_FIS_RX		= (1 << 4), /* Enable FIS receive DMA engine */
> -	PORT_CMD_CLO		= (1 << 3), /* Command list override */
> -	PORT_CMD_POWER_ON	= (1 << 2), /* Power up device */
> -	PORT_CMD_SPIN_UP	= (1 << 1), /* Spin up device */
> -	PORT_CMD_START		= (1 << 0), /* Enable port DMA engine */
> +	PORT_CMD_ASP		= BIT(27), /* Aggressive Slumber/Partial */
> +	PORT_CMD_ALPE		= BIT(26), /* Aggressive Link PM enable */
> +	PORT_CMD_ATAPI		= BIT(24), /* Device is ATAPI */
> +	PORT_CMD_FBSCP		= BIT(22), /* FBS Capable Port */
> +	PORT_CMD_ESP		= BIT(21), /* External Sata Port */
> +	PORT_CMD_CPD		= BIT(20), /* Cold Presence Detection */
> +	PORT_CMD_MPSP		= BIT(19), /* Mechanical Presence Switch */
> +	PORT_CMD_HPCP		= BIT(18), /* HotPlug Capable Port */
> +	PORT_CMD_PMP		= BIT(17), /* PMP attached */
> +	PORT_CMD_LIST_ON	= BIT(15), /* cmd list DMA engine running */
> +	PORT_CMD_FIS_ON		= BIT(14), /* FIS DMA engine running */
> +	PORT_CMD_FIS_RX		= BIT(4), /* Enable FIS receive DMA engine */
> +	PORT_CMD_CLO		= BIT(3), /* Command list override */
> +	PORT_CMD_POWER_ON	= BIT(2), /* Power up device */
> +	PORT_CMD_SPIN_UP	= BIT(1), /* Spin up device */
> +	PORT_CMD_START		= BIT(0), /* Enable port DMA engine */
>  
>  	PORT_CMD_ICC_MASK	= (0xf << 28), /* i/f ICC state mask */
>  	PORT_CMD_ICC_ACTIVE	= (0x1 << 28), /* Put i/f in active state */
> @@ -192,9 +192,9 @@ enum {
>  	PORT_FBS_ADO_OFFSET	= 12, /* FBS active dev optimization offset */
>  	PORT_FBS_DEV_OFFSET	= 8,  /* FBS device to issue offset */
>  	PORT_FBS_DEV_MASK	= (0xf << PORT_FBS_DEV_OFFSET),  /* FBS.DEV */
> -	PORT_FBS_SDE		= (1 << 2), /* FBS single device error */
> -	PORT_FBS_DEC		= (1 << 1), /* FBS device error clear */
> -	PORT_FBS_EN		= (1 << 0), /* Enable FBS */
> +	PORT_FBS_SDE		= BIT(2), /* FBS single device error */
> +	PORT_FBS_DEC		= BIT(1), /* FBS device error clear */
> +	PORT_FBS_EN		= BIT(0), /* Enable FBS */
>  
>  	/* PORT_DEVSLP bits */
>  	PORT_DEVSLP_DM_OFFSET	= 25,             /* DITO multiplier offset */
> @@ -202,50 +202,50 @@ enum {
>  	PORT_DEVSLP_DITO_OFFSET	= 15,             /* DITO offset */
>  	PORT_DEVSLP_MDAT_OFFSET	= 10,             /* Minimum assertion time */
>  	PORT_DEVSLP_DETO_OFFSET	= 2,              /* DevSlp exit timeout */
> -	PORT_DEVSLP_DSP		= (1 << 1),       /* DevSlp present */
> -	PORT_DEVSLP_ADSE	= (1 << 0),       /* Aggressive DevSlp enable */
> +	PORT_DEVSLP_DSP		= BIT(1),       /* DevSlp present */
> +	PORT_DEVSLP_ADSE	= BIT(0),       /* Aggressive DevSlp enable */
>  
>  	/* hpriv->flags bits */
>  
>  #define AHCI_HFLAGS(flags)		.private_data	= (void *)(flags)
>  
> -	AHCI_HFLAG_NO_NCQ		= (1 << 0),
> -	AHCI_HFLAG_IGN_IRQ_IF_ERR	= (1 << 1), /* ignore IRQ_IF_ERR */
> -	AHCI_HFLAG_IGN_SERR_INTERNAL	= (1 << 2), /* ignore SERR_INTERNAL */
> -	AHCI_HFLAG_32BIT_ONLY		= (1 << 3), /* force 32bit */
> -	AHCI_HFLAG_MV_PATA		= (1 << 4), /* PATA port */
> -	AHCI_HFLAG_NO_MSI		= (1 << 5), /* no PCI MSI */
> -	AHCI_HFLAG_NO_PMP		= (1 << 6), /* no PMP */
> -	AHCI_HFLAG_SECT255		= (1 << 8), /* max 255 sectors */
> -	AHCI_HFLAG_YES_NCQ		= (1 << 9), /* force NCQ cap on */
> -	AHCI_HFLAG_NO_SUSPEND		= (1 << 10), /* don't suspend */
> -	AHCI_HFLAG_SRST_TOUT_IS_OFFLINE	= (1 << 11), /* treat SRST timeout as
> +	AHCI_HFLAG_NO_NCQ		= BIT(0),
> +	AHCI_HFLAG_IGN_IRQ_IF_ERR	= BIT(1), /* ignore IRQ_IF_ERR */
> +	AHCI_HFLAG_IGN_SERR_INTERNAL	= BIT(2), /* ignore SERR_INTERNAL */
> +	AHCI_HFLAG_32BIT_ONLY		= BIT(3), /* force 32bit */
> +	AHCI_HFLAG_MV_PATA		= BIT(4), /* PATA port */
> +	AHCI_HFLAG_NO_MSI		= BIT(5), /* no PCI MSI */
> +	AHCI_HFLAG_NO_PMP		= BIT(6), /* no PMP */
> +	AHCI_HFLAG_SECT255		= BIT(8), /* max 255 sectors */
> +	AHCI_HFLAG_YES_NCQ		= BIT(9), /* force NCQ cap on */
> +	AHCI_HFLAG_NO_SUSPEND		= BIT(10), /* don't suspend */
> +	AHCI_HFLAG_SRST_TOUT_IS_OFFLINE	= BIT(11), /* treat SRST timeout as
>  							link offline */
> -	AHCI_HFLAG_NO_SNTF		= (1 << 12), /* no sntf */
> -	AHCI_HFLAG_NO_FPDMA_AA		= (1 << 13), /* no FPDMA AA */
> -	AHCI_HFLAG_YES_FBS		= (1 << 14), /* force FBS cap on */
> -	AHCI_HFLAG_DELAY_ENGINE		= (1 << 15), /* do not start engine on
> +	AHCI_HFLAG_NO_SNTF		= BIT(12), /* no sntf */
> +	AHCI_HFLAG_NO_FPDMA_AA		= BIT(13), /* no FPDMA AA */
> +	AHCI_HFLAG_YES_FBS		= BIT(14), /* force FBS cap on */
> +	AHCI_HFLAG_DELAY_ENGINE		= BIT(15), /* do not start engine on
>  						        port start (wait until
>  						        error-handling stage) */
> -	AHCI_HFLAG_NO_DEVSLP		= (1 << 17), /* no device sleep */
> -	AHCI_HFLAG_NO_FBS		= (1 << 18), /* no FBS */
> +	AHCI_HFLAG_NO_DEVSLP		= BIT(17), /* no device sleep */
> +	AHCI_HFLAG_NO_FBS		= BIT(18), /* no FBS */
>  
>  #ifdef CONFIG_PCI_MSI
> -	AHCI_HFLAG_MULTI_MSI		= (1 << 20), /* per-port MSI(-X) */
> +	AHCI_HFLAG_MULTI_MSI		= BIT(20), /* per-port MSI(-X) */
>  #else
>  	/* compile out MSI infrastructure */
>  	AHCI_HFLAG_MULTI_MSI		= 0,
>  #endif
> -	AHCI_HFLAG_WAKE_BEFORE_STOP	= (1 << 22), /* wake before DMA stop */
> -	AHCI_HFLAG_YES_ALPM		= (1 << 23), /* force ALPM cap on */
> -	AHCI_HFLAG_NO_WRITE_TO_RO	= (1 << 24), /* don't write to read
> +	AHCI_HFLAG_WAKE_BEFORE_STOP	= BIT(22), /* wake before DMA stop */
> +	AHCI_HFLAG_YES_ALPM		= BIT(23), /* force ALPM cap on */
> +	AHCI_HFLAG_NO_WRITE_TO_RO	= BIT(24), /* don't write to read
>  							only registers */
> -	AHCI_HFLAG_USE_LPM_POLICY	= (1 << 25), /* chipset that should use
> +	AHCI_HFLAG_USE_LPM_POLICY	= BIT(25), /* chipset that should use
>  							SATA_MOBILE_LPM_POLICY
>  							as default lpm_policy */
> -	AHCI_HFLAG_SUSPEND_PHYS		= (1 << 26), /* handle PHYs during
> +	AHCI_HFLAG_SUSPEND_PHYS		= BIT(26), /* handle PHYs during
>  							suspend/resume */
> -	AHCI_HFLAG_NO_SXS		= (1 << 28), /* SXS not supported */
> +	AHCI_HFLAG_NO_SXS		= BIT(28), /* SXS not supported */
>  
>  	/* ap->flags bits */
>  
> @@ -261,22 +261,22 @@ enum {
>  	EM_MAX_RETRY			= 5,
>  
>  	/* em_ctl bits */
> -	EM_CTL_RST		= (1 << 9), /* Reset */
> -	EM_CTL_TM		= (1 << 8), /* Transmit Message */
> -	EM_CTL_MR		= (1 << 0), /* Message Received */
> -	EM_CTL_ALHD		= (1 << 26), /* Activity LED */
> -	EM_CTL_XMT		= (1 << 25), /* Transmit Only */
> -	EM_CTL_SMB		= (1 << 24), /* Single Message Buffer */
> -	EM_CTL_SGPIO		= (1 << 19), /* SGPIO messages supported */
> -	EM_CTL_SES		= (1 << 18), /* SES-2 messages supported */
> -	EM_CTL_SAFTE		= (1 << 17), /* SAF-TE messages supported */
> -	EM_CTL_LED		= (1 << 16), /* LED messages supported */
> +	EM_CTL_RST		= BIT(9), /* Reset */
> +	EM_CTL_TM		= BIT(8), /* Transmit Message */
> +	EM_CTL_MR		= BIT(0), /* Message Received */
> +	EM_CTL_ALHD		= BIT(26), /* Activity LED */
> +	EM_CTL_XMT		= BIT(25), /* Transmit Only */
> +	EM_CTL_SMB		= BIT(24), /* Single Message Buffer */
> +	EM_CTL_SGPIO		= BIT(19), /* SGPIO messages supported */
> +	EM_CTL_SES		= BIT(18), /* SES-2 messages supported */
> +	EM_CTL_SAFTE		= BIT(17), /* SAF-TE messages supported */
> +	EM_CTL_LED		= BIT(16), /* LED messages supported */
>  
>  	/* em message type */
> -	EM_MSG_TYPE_LED		= (1 << 0), /* LED */
> -	EM_MSG_TYPE_SAFTE	= (1 << 1), /* SAF-TE */
> -	EM_MSG_TYPE_SES2	= (1 << 2), /* SES-2 */
> -	EM_MSG_TYPE_SGPIO	= (1 << 3), /* SGPIO */
> +	EM_MSG_TYPE_LED		= BIT(0), /* LED */
> +	EM_MSG_TYPE_SAFTE	= BIT(1), /* SAF-TE */
> +	EM_MSG_TYPE_SES2	= BIT(2), /* SES-2 */
> +	EM_MSG_TYPE_SGPIO	= BIT(3), /* SGPIO */
>  };
>  
>  struct ahci_cmd_hdr {