diff mbox series

[v4,4/4] ublk: add zone append

Message ID	20230628190649.11233-5-nmi@metaspace.dk
State	New
Headers	Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; From: Andreas Hindborg <nmi@metaspace.dk> To: Ming Lei <ming.lei@redhat.com> Cc: Hans Holmberg <Hans.Holmberg@wdc.com>, Aravind Ramesh <Aravind.Ramesh@wdc.com>, Jens Axboe <axboe@kernel.dk>, linux-block@vger.kernel.org (open list:BLOCK LAYER), Christoph Hellwig <hch@infradead.org>, Matias Bjorling <Matias.Bjorling@wdc.com>, Andreas Hindborg <a.hindborg@samsung.com>, linux-kernel@vger.kernel.org (open list), Damien Le Moal <dlemoal@kernel.org>, gost.dev@samsung.com, Minwoo Im <minwoo.im.dev@gmail.com> Subject: [PATCH v4 4/4] ublk: add zone append Date: Wed, 28 Jun 2023 21:06:49 +0200 Message-ID: <20230628190649.11233-5-nmi@metaspace.dk> In-Reply-To: <20230628190649.11233-1-nmi@metaspace.dk> References: <20230628190649.11233-1-nmi@metaspace.dk> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	ublk: add zoned storage support \| [v4,0/4] ublk: add zoned storage support [v4,1/4] ublk: change ublk IO command defines to enum [v4,2/4] ublk: move types to shared header file [v4,3/4] ublk: enable zoned storage support [v4,4/4] ublk: add zone append

Commit Message

Andreas Hindborg June 28, 2023, 7:06 p.m. UTC

  From: Andreas Hindborg <a.hindborg@samsung.com>

Add zone append feature to ublk. This feature uses the `addr` field of `struct
ublksrv_io_cmd`. Therefore ublk must be used with the user copy
feature (UBLK_F_USER_COPY) for zone append to be available. Without this
feature, ublk will fail zone append requests.

Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
---
 drivers/block/ublk_drv-zoned.c | 11 +++++++++
 drivers/block/ublk_drv.c       | 43 ++++++++++++++++++++++++++++++----
 drivers/block/ublk_drv.h       |  1 +
 include/uapi/linux/ublk_cmd.h  |  3 ++-
 4 files changed, 52 insertions(+), 6 deletions(-)

Comments

Damien Le Moal June 28, 2023, 11:17 p.m. UTC | #1

On 6/29/23 04:06, Andreas Hindborg wrote:
> From: Andreas Hindborg <a.hindborg@samsung.com>
> 
> Add zone append feature to ublk. This feature uses the `addr` field of `struct
> ublksrv_io_cmd`. Therefore ublk must be used with the user copy
> feature (UBLK_F_USER_COPY) for zone append to be available. Without this
> feature, ublk will fail zone append requests.
> 
> Suggested-by: Ming Lei <ming.lei@redhat.com>
> Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>

This needs to be squashed in patch 3.

> ---
>  drivers/block/ublk_drv-zoned.c | 11 +++++++++
>  drivers/block/ublk_drv.c       | 43 ++++++++++++++++++++++++++++++----
>  drivers/block/ublk_drv.h       |  1 +
>  include/uapi/linux/ublk_cmd.h  |  3 ++-
>  4 files changed, 52 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/block/ublk_drv-zoned.c b/drivers/block/ublk_drv-zoned.c
> index ea86bf4b3681..007e8fc7ff25 100644
> --- a/drivers/block/ublk_drv-zoned.c
> +++ b/drivers/block/ublk_drv-zoned.c
> @@ -16,6 +16,16 @@ void ublk_set_nr_zones(struct ublk_device *ub)
>  		ub->ub_disk->nr_zones = p->dev_sectors / p->chunk_sectors;
>  }
>  
> +int ublk_dev_param_zoned_validate(const struct ublk_device *ub)
> +{
> +	const struct ublk_param_zoned *p = &ub->params.zoned;
> +
> +	if (! p->max_zone_append_sectors)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
>  void ublk_dev_param_zoned_apply(struct ublk_device *ub)
>  {
>  	const struct ublk_param_zoned *p = &ub->params.zoned;
> @@ -23,6 +33,7 @@ void ublk_dev_param_zoned_apply(struct ublk_device *ub)
>  	if (ub->dev_info.flags & UBLK_F_ZONED) {
>  		disk_set_max_active_zones(ub->ub_disk, p->max_active_zones);
>  		disk_set_max_open_zones(ub->ub_disk, p->max_open_zones);
> +		blk_queue_max_zone_append_sectors(ub->ub_disk->queue, p->max_zone_append_sectors);
>  	}
>  }
>  
> diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
> index 88fa39853c61..6a949669b47e 100644
> --- a/drivers/block/ublk_drv.c
> +++ b/drivers/block/ublk_drv.c
> @@ -107,6 +107,11 @@ struct ublk_uring_cmd_pdu {
>   */
>  #define UBLK_IO_FLAG_NEED_GET_DATA 0x08
>  
> +/*
> + * Set when IO is Zone Append
> + */
> +#define UBLK_IO_FLAG_ZONE_APPEND 0x10
> +
>  struct ublk_io {
>  	/* userspace buffer address from io cmd */
>  	__u64	addr;
> @@ -230,6 +235,8 @@ static void ublk_dev_param_discard_apply(struct ublk_device *ub)
>  
>  static int ublk_validate_params(const struct ublk_device *ub)
>  {
> +	int ret = 0;
> +
>  	/* basic param is the only one which must be set */
>  	if (ub->params.types & UBLK_PARAM_TYPE_BASIC) {
>  		const struct ublk_param_basic *p = &ub->params.basic;
> @@ -260,6 +267,13 @@ static int ublk_validate_params(const struct ublk_device *ub)
>  	if (ub->params.types & UBLK_PARAM_TYPE_DEVT)
>  		return -EINVAL;
>  
> +	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
> +	    (ub->params.types & UBLK_PARAM_TYPE_ZONED)) {
> +		ret = ublk_dev_param_zoned_validate(ub);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	return 0;
>  }
>  
> @@ -690,6 +704,11 @@ static blk_status_t ublk_setup_iod(struct ublk_queue *ubq, struct request *req)
>  			return BLK_STS_IOERR;
>  		}
>  	case REQ_OP_ZONE_APPEND:
> +		if (!(ubq->dev->dev_info.flags & UBLK_F_USER_COPY))
> +			return BLK_STS_IOERR;
> +		ublk_op = UBLK_IO_OP_ZONE_APPEND;
> +		io->flags |= UBLK_IO_FLAG_ZONE_APPEND;
> +		break;
>  	case REQ_OP_ZONE_RESET_ALL:
>  	case REQ_OP_DRV_OUT:
>  		/* We do not support zone append or reset_all yet */
> @@ -1112,6 +1131,12 @@ static void ublk_commit_completion(struct ublk_device *ub,
>  	/* find the io request and complete */
>  	req = blk_mq_tag_to_rq(ub->tag_set.tags[qid], tag);
>  
> +	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED)) {
> +		if (io->flags & UBLK_IO_FLAG_ZONE_APPEND)
> +			req->__sector = ub_cmd->addr;
> +		io->flags &= ~UBLK_IO_FLAG_ZONE_APPEND;
> +	}
> +
>  	if (req && likely(!blk_should_fake_timeout(req->q)))
>  		ublk_put_req_ref(ubq, req);
>  }
> @@ -1411,7 +1436,8 @@ static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
>  			^ (_IOC_NR(cmd_op) == UBLK_IO_NEED_GET_DATA))
>  		goto out;
>  
> -	if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
> +	if (ublk_support_user_copy(ubq) &&
> +	    !(io->flags & UBLK_IO_FLAG_ZONE_APPEND) && ub_cmd->addr) {
>  		ret = -EINVAL;
>  		goto out;
>  	}
> @@ -1534,11 +1560,14 @@ static inline bool ublk_check_ubuf_dir(const struct request *req,
>  		int ubuf_dir)
>  {
>  	/* copy ubuf to request pages */
> -	if (req_op(req) == REQ_OP_READ && ubuf_dir == ITER_SOURCE)
> +	if ((req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_DRV_IN) &&
> +	    ubuf_dir == ITER_SOURCE)
>  		return true;
>  
>  	/* copy request pages to ubuf */
> -	if (req_op(req) == REQ_OP_WRITE && ubuf_dir == ITER_DEST)
> +	if ((req_op(req) == REQ_OP_WRITE ||
> +	     req_op(req) == REQ_OP_ZONE_APPEND) &&
> +	    ubuf_dir == ITER_DEST)
>  		return true;
>  
>  	return false;
> @@ -1867,6 +1896,12 @@ static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
>  	ub->dev_info.ublksrv_pid = ublksrv_pid;
>  	ub->ub_disk = disk;
>  
> +	ub->dev_info.state = UBLK_S_DEV_LIVE;
> +	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
> +	    ub->dev_info.flags & UBLK_F_ZONED) {
> +		disk_set_zoned(disk, BLK_ZONED_HM);
> +	}
> +
>  	ret = ublk_apply_params(ub);
>  	if (ret)
>  		goto out_put_disk;
> @@ -1877,7 +1912,6 @@ static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
>  
>  	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
>  	    ub->dev_info.flags & UBLK_F_ZONED) {
> -		disk_set_zoned(disk, BLK_ZONED_HM);
>  		blk_queue_required_elevator_features(disk->queue, ELEVATOR_F_ZBD_SEQ_WRITE);
>  		ret = ublk_revalidate_disk_zones(disk);
>  		if (ret)
> @@ -1885,7 +1919,6 @@ static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
>  	}
>  
>  	get_device(&ub->cdev_dev);
> -	ub->dev_info.state = UBLK_S_DEV_LIVE;
>  	ret = add_disk(disk);
>  	if (ret) {
>  		/*
> diff --git a/drivers/block/ublk_drv.h b/drivers/block/ublk_drv.h
> index 7242430fd6b9..f55e1c25531d 100644
> --- a/drivers/block/ublk_drv.h
> +++ b/drivers/block/ublk_drv.h
> @@ -56,6 +56,7 @@ struct ublk_rq_data {
>  };
>  
>  void ublk_set_nr_zones(struct ublk_device *ub);
> +int ublk_dev_param_zoned_validate(const struct ublk_device *ub);
>  void ublk_dev_param_zoned_apply(struct ublk_device *ub);
>  int ublk_revalidate_disk_zones(struct gendisk *disk);
>  
> diff --git a/include/uapi/linux/ublk_cmd.h b/include/uapi/linux/ublk_cmd.h
> index 436525afffe8..4b6ad0b28598 100644
> --- a/include/uapi/linux/ublk_cmd.h
> +++ b/include/uapi/linux/ublk_cmd.h
> @@ -351,7 +351,8 @@ struct ublk_param_devt {
>  struct ublk_param_zoned {
>  	__u32	max_open_zones;
>  	__u32	max_active_zones;
> -	__u8	reserved[24];
> +	__u32   max_zone_append_sectors;
> +	__u8	reserved[20];
>  };
>  
>  struct ublk_params {

Ming Lei June 29, 2023, 2:46 a.m. UTC | #2

On Wed, Jun 28, 2023 at 09:06:49PM +0200, Andreas Hindborg wrote:
> From: Andreas Hindborg <a.hindborg@samsung.com>
> 
> Add zone append feature to ublk. This feature uses the `addr` field of `struct
> ublksrv_io_cmd`. Therefore ublk must be used with the user copy
> feature (UBLK_F_USER_COPY) for zone append to be available. Without this
> feature, ublk will fail zone append requests.

Given zone append is a must, please fail to add device in case of zoned
and !user_copy, then we can make fast IO code path clean.

> 
> Suggested-by: Ming Lei <ming.lei@redhat.com>
> Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
> ---
>  drivers/block/ublk_drv-zoned.c | 11 +++++++++
>  drivers/block/ublk_drv.c       | 43 ++++++++++++++++++++++++++++++----
>  drivers/block/ublk_drv.h       |  1 +
>  include/uapi/linux/ublk_cmd.h  |  3 ++-
>  4 files changed, 52 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/block/ublk_drv-zoned.c b/drivers/block/ublk_drv-zoned.c
> index ea86bf4b3681..007e8fc7ff25 100644
> --- a/drivers/block/ublk_drv-zoned.c
> +++ b/drivers/block/ublk_drv-zoned.c
> @@ -16,6 +16,16 @@ void ublk_set_nr_zones(struct ublk_device *ub)
>  		ub->ub_disk->nr_zones = p->dev_sectors / p->chunk_sectors;
>  }
>  
> +int ublk_dev_param_zoned_validate(const struct ublk_device *ub)
> +{
> +	const struct ublk_param_zoned *p = &ub->params.zoned;
> +
> +	if (! p->max_zone_append_sectors)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
>  void ublk_dev_param_zoned_apply(struct ublk_device *ub)
>  {
>  	const struct ublk_param_zoned *p = &ub->params.zoned;
> @@ -23,6 +33,7 @@ void ublk_dev_param_zoned_apply(struct ublk_device *ub)
>  	if (ub->dev_info.flags & UBLK_F_ZONED) {
>  		disk_set_max_active_zones(ub->ub_disk, p->max_active_zones);
>  		disk_set_max_open_zones(ub->ub_disk, p->max_open_zones);
> +		blk_queue_max_zone_append_sectors(ub->ub_disk->queue, p->max_zone_append_sectors);
>  	}
>  }
>  
> diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
> index 88fa39853c61..6a949669b47e 100644
> --- a/drivers/block/ublk_drv.c
> +++ b/drivers/block/ublk_drv.c
> @@ -107,6 +107,11 @@ struct ublk_uring_cmd_pdu {
>   */
>  #define UBLK_IO_FLAG_NEED_GET_DATA 0x08
>  
> +/*
> + * Set when IO is Zone Append
> + */
> +#define UBLK_IO_FLAG_ZONE_APPEND 0x10
> +
>  struct ublk_io {
>  	/* userspace buffer address from io cmd */
>  	__u64	addr;
> @@ -230,6 +235,8 @@ static void ublk_dev_param_discard_apply(struct ublk_device *ub)
>  
>  static int ublk_validate_params(const struct ublk_device *ub)
>  {
> +	int ret = 0;
> +
>  	/* basic param is the only one which must be set */
>  	if (ub->params.types & UBLK_PARAM_TYPE_BASIC) {
>  		const struct ublk_param_basic *p = &ub->params.basic;
> @@ -260,6 +267,13 @@ static int ublk_validate_params(const struct ublk_device *ub)
>  	if (ub->params.types & UBLK_PARAM_TYPE_DEVT)
>  		return -EINVAL;
>  
> +	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
> +	    (ub->params.types & UBLK_PARAM_TYPE_ZONED)) {
> +		ret = ublk_dev_param_zoned_validate(ub);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	return 0;
>  }
>  
> @@ -690,6 +704,11 @@ static blk_status_t ublk_setup_iod(struct ublk_queue *ubq, struct request *req)
>  			return BLK_STS_IOERR;
>  		}
>  	case REQ_OP_ZONE_APPEND:
> +		if (!(ubq->dev->dev_info.flags & UBLK_F_USER_COPY))
> +			return BLK_STS_IOERR;
> +		ublk_op = UBLK_IO_OP_ZONE_APPEND;
> +		io->flags |= UBLK_IO_FLAG_ZONE_APPEND;
> +		break;
>  	case REQ_OP_ZONE_RESET_ALL:
>  	case REQ_OP_DRV_OUT:
>  		/* We do not support zone append or reset_all yet */
> @@ -1112,6 +1131,12 @@ static void ublk_commit_completion(struct ublk_device *ub,
>  	/* find the io request and complete */
>  	req = blk_mq_tag_to_rq(ub->tag_set.tags[qid], tag);
>  
> +	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED)) {
> +		if (io->flags & UBLK_IO_FLAG_ZONE_APPEND)
> +			req->__sector = ub_cmd->addr;
> +		io->flags &= ~UBLK_IO_FLAG_ZONE_APPEND;
> +	}
> +
>  	if (req && likely(!blk_should_fake_timeout(req->q)))
>  		ublk_put_req_ref(ubq, req);
>  }
> @@ -1411,7 +1436,8 @@ static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
>  			^ (_IOC_NR(cmd_op) == UBLK_IO_NEED_GET_DATA))
>  		goto out;
>  
> -	if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
> +	if (ublk_support_user_copy(ubq) &&
> +	    !(io->flags & UBLK_IO_FLAG_ZONE_APPEND) && ub_cmd->addr) {
>  		ret = -EINVAL;
>  		goto out;
>  	}
> @@ -1534,11 +1560,14 @@ static inline bool ublk_check_ubuf_dir(const struct request *req,
>  		int ubuf_dir)
>  {
>  	/* copy ubuf to request pages */
> -	if (req_op(req) == REQ_OP_READ && ubuf_dir == ITER_SOURCE)
> +	if ((req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_DRV_IN) &&
> +	    ubuf_dir == ITER_SOURCE)
>  		return true;
>  
>  	/* copy request pages to ubuf */
> -	if (req_op(req) == REQ_OP_WRITE && ubuf_dir == ITER_DEST)
> +	if ((req_op(req) == REQ_OP_WRITE ||
> +	     req_op(req) == REQ_OP_ZONE_APPEND) &&
> +	    ubuf_dir == ITER_DEST)
>  		return true;
>  
>  	return false;
> @@ -1867,6 +1896,12 @@ static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
>  	ub->dev_info.ublksrv_pid = ublksrv_pid;
>  	ub->ub_disk = disk;
>  
> +	ub->dev_info.state = UBLK_S_DEV_LIVE;

I guess the above line change isn't necessary?


Thanks, 
Ming

Andreas Hindborg June 29, 2023, 9:17 a.m. UTC | #3

Ming Lei <ming.lei@redhat.com> writes:

> On Wed, Jun 28, 2023 at 09:06:49PM +0200, Andreas Hindborg wrote:
>> From: Andreas Hindborg <a.hindborg@samsung.com>
>> 
>> Add zone append feature to ublk. This feature uses the `addr` field of `struct
>> ublksrv_io_cmd`. Therefore ublk must be used with the user copy
>> feature (UBLK_F_USER_COPY) for zone append to be available. Without this
>> feature, ublk will fail zone append requests.
>
> Given zone append is a must, please fail to add device in case of zoned
> and !user_copy, then we can make fast IO code path clean.

I will squash the patches and reject zone support if not user copy is
enabled 👍

>
>> 
>> Suggested-by: Ming Lei <ming.lei@redhat.com>
>> Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com>
>> ---
>>  drivers/block/ublk_drv-zoned.c | 11 +++++++++
>>  drivers/block/ublk_drv.c       | 43 ++++++++++++++++++++++++++++++----
>>  drivers/block/ublk_drv.h       |  1 +
>>  include/uapi/linux/ublk_cmd.h  |  3 ++-
>>  4 files changed, 52 insertions(+), 6 deletions(-)
>> 
>> diff --git a/drivers/block/ublk_drv-zoned.c b/drivers/block/ublk_drv-zoned.c
>> index ea86bf4b3681..007e8fc7ff25 100644
>> --- a/drivers/block/ublk_drv-zoned.c
>> +++ b/drivers/block/ublk_drv-zoned.c
>> @@ -16,6 +16,16 @@ void ublk_set_nr_zones(struct ublk_device *ub)
>>  		ub->ub_disk->nr_zones = p->dev_sectors / p->chunk_sectors;
>>  }
>>  
>> +int ublk_dev_param_zoned_validate(const struct ublk_device *ub)
>> +{
>> +	const struct ublk_param_zoned *p = &ub->params.zoned;
>> +
>> +	if (! p->max_zone_append_sectors)
>> +		return -EINVAL;
>> +
>> +	return 0;
>> +}
>> +
>>  void ublk_dev_param_zoned_apply(struct ublk_device *ub)
>>  {
>>  	const struct ublk_param_zoned *p = &ub->params.zoned;
>> @@ -23,6 +33,7 @@ void ublk_dev_param_zoned_apply(struct ublk_device *ub)
>>  	if (ub->dev_info.flags & UBLK_F_ZONED) {
>>  		disk_set_max_active_zones(ub->ub_disk, p->max_active_zones);
>>  		disk_set_max_open_zones(ub->ub_disk, p->max_open_zones);
>> +		blk_queue_max_zone_append_sectors(ub->ub_disk->queue, p->max_zone_append_sectors);
>>  	}
>>  }
>>  
>> diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
>> index 88fa39853c61..6a949669b47e 100644
>> --- a/drivers/block/ublk_drv.c
>> +++ b/drivers/block/ublk_drv.c
>> @@ -107,6 +107,11 @@ struct ublk_uring_cmd_pdu {
>>   */
>>  #define UBLK_IO_FLAG_NEED_GET_DATA 0x08
>>  
>> +/*
>> + * Set when IO is Zone Append
>> + */
>> +#define UBLK_IO_FLAG_ZONE_APPEND 0x10
>> +
>>  struct ublk_io {
>>  	/* userspace buffer address from io cmd */
>>  	__u64	addr;
>> @@ -230,6 +235,8 @@ static void ublk_dev_param_discard_apply(struct ublk_device *ub)
>>  
>>  static int ublk_validate_params(const struct ublk_device *ub)
>>  {
>> +	int ret = 0;
>> +
>>  	/* basic param is the only one which must be set */
>>  	if (ub->params.types & UBLK_PARAM_TYPE_BASIC) {
>>  		const struct ublk_param_basic *p = &ub->params.basic;
>> @@ -260,6 +267,13 @@ static int ublk_validate_params(const struct ublk_device *ub)
>>  	if (ub->params.types & UBLK_PARAM_TYPE_DEVT)
>>  		return -EINVAL;
>>  
>> +	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
>> +	    (ub->params.types & UBLK_PARAM_TYPE_ZONED)) {
>> +		ret = ublk_dev_param_zoned_validate(ub);
>> +		if (ret)
>> +			return ret;
>> +	}
>> +
>>  	return 0;
>>  }
>>  
>> @@ -690,6 +704,11 @@ static blk_status_t ublk_setup_iod(struct ublk_queue *ubq, struct request *req)
>>  			return BLK_STS_IOERR;
>>  		}
>>  	case REQ_OP_ZONE_APPEND:
>> +		if (!(ubq->dev->dev_info.flags & UBLK_F_USER_COPY))
>> +			return BLK_STS_IOERR;
>> +		ublk_op = UBLK_IO_OP_ZONE_APPEND;
>> +		io->flags |= UBLK_IO_FLAG_ZONE_APPEND;
>> +		break;
>>  	case REQ_OP_ZONE_RESET_ALL:
>>  	case REQ_OP_DRV_OUT:
>>  		/* We do not support zone append or reset_all yet */
>> @@ -1112,6 +1131,12 @@ static void ublk_commit_completion(struct ublk_device *ub,
>>  	/* find the io request and complete */
>>  	req = blk_mq_tag_to_rq(ub->tag_set.tags[qid], tag);
>>  
>> +	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED)) {
>> +		if (io->flags & UBLK_IO_FLAG_ZONE_APPEND)
>> +			req->__sector = ub_cmd->addr;
>> +		io->flags &= ~UBLK_IO_FLAG_ZONE_APPEND;
>> +	}
>> +
>>  	if (req && likely(!blk_should_fake_timeout(req->q)))
>>  		ublk_put_req_ref(ubq, req);
>>  }
>> @@ -1411,7 +1436,8 @@ static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
>>  			^ (_IOC_NR(cmd_op) == UBLK_IO_NEED_GET_DATA))
>>  		goto out;
>>  
>> -	if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
>> +	if (ublk_support_user_copy(ubq) &&
>> +	    !(io->flags & UBLK_IO_FLAG_ZONE_APPEND) && ub_cmd->addr) {
>>  		ret = -EINVAL;
>>  		goto out;
>>  	}
>> @@ -1534,11 +1560,14 @@ static inline bool ublk_check_ubuf_dir(const struct request *req,
>>  		int ubuf_dir)
>>  {
>>  	/* copy ubuf to request pages */
>> -	if (req_op(req) == REQ_OP_READ && ubuf_dir == ITER_SOURCE)
>> +	if ((req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_DRV_IN) &&
>> +	    ubuf_dir == ITER_SOURCE)
>>  		return true;
>>  
>>  	/* copy request pages to ubuf */
>> -	if (req_op(req) == REQ_OP_WRITE && ubuf_dir == ITER_DEST)
>> +	if ((req_op(req) == REQ_OP_WRITE ||
>> +	     req_op(req) == REQ_OP_ZONE_APPEND) &&
>> +	    ubuf_dir == ITER_DEST)
>>  		return true;
>>  
>>  	return false;
>> @@ -1867,6 +1896,12 @@ static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
>>  	ub->dev_info.ublksrv_pid = ublksrv_pid;
>>  	ub->ub_disk = disk;
>>  
>> +	ub->dev_info.state = UBLK_S_DEV_LIVE;
>
> I guess the above line change isn't necessary?

It needs to go before the call to `ublk_revalidate_disk_zones()` because
that does IO to the disk in the form of a call to `report_zones()`. So I
can move it down a little bit.

Best regards,
Andreas

Damien Le Moal June 29, 2023, 9:43 a.m. UTC | #4

On 6/29/23 18:17, Andreas Hindborg (Samsung) wrote:
> 
> Ming Lei <ming.lei@redhat.com> writes:
> 
>> On Wed, Jun 28, 2023 at 09:06:49PM +0200, Andreas Hindborg wrote:
>>> From: Andreas Hindborg <a.hindborg@samsung.com>
>>>
>>> Add zone append feature to ublk. This feature uses the `addr` field of `struct
>>> ublksrv_io_cmd`. Therefore ublk must be used with the user copy
>>> feature (UBLK_F_USER_COPY) for zone append to be available. Without this
>>> feature, ublk will fail zone append requests.
>>
>> Given zone append is a must, please fail to add device in case of zoned
>> and !user_copy, then we can make fast IO code path clean.
> 
> I will squash the patches and reject zone support if not user copy is
> enabled 👍

Or if !CONFIG_BLK_DEV_ZONED or if the user specifies a bad parameter (invalid
limits etc).

aravind.ramesh@opensource.wdc.com June 30, 2023, 10:35 a.m. UTC | #5

> From: Andreas Hindborg <a.hindborg@samsung.com 
> <mailto:a.hindborg@samsung.com>>
> 
> 
> Add zone append feature to ublk. This feature uses the `addr` field of 
> `struct

checkpatch.pl warns on the keeping the line within 75 characters.
WARNING: Possible unwrapped commit description (prefer a maximum 75 
chars per line)

> ublksrv_io_cmd`. Therefore ublk must be used with the user copy
> feature (UBLK_F_USER_COPY) for zone append to be available. Without 
> this
> feature, ublk will fail zone append requests.
> 
> 
> Suggested-by: Ming Lei <ming.lei@redhat.com 
> <mailto:ming.lei@redhat.com>>
> Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com
> <mailto:a.hindborg@samsung.com>>
> ---
> drivers/block/ublk_drv-zoned.c | 11 +++++++++
> drivers/block/ublk_drv.c | 43 ++++++++++++++++++++++++++++++----
> drivers/block/ublk_drv.h | 1 +
> include/uapi/linux/ublk_cmd.h | 3 ++-
> 4 files changed, 52 insertions(+), 6 deletions(-)
> 
> 
> diff --git a/drivers/block/ublk_drv-zoned.c 
> b/drivers/block/ublk_drv-zoned.c
> index ea86bf4b3681..007e8fc7ff25 100644
> --- a/drivers/block/ublk_drv-zoned.c
> +++ b/drivers/block/ublk_drv-zoned.c
> @@ -16,6 +16,16 @@ void ublk_set_nr_zones(struct ublk_device *ub)
> ub->ub_disk->nr_zones = p->dev_sectors / p->chunk_sectors;
> }
> 
> 
> +int ublk_dev_param_zoned_validate(const struct ublk_device *ub)
> +{
> + const struct ublk_param_zoned *p = &ub->params.zoned;
> +
> + if (! p->max_zone_append_sectors)

checkpatch.pl errors out here
ERROR: space prohibited after that '!' (ctx:BxW)
if (!p->max_zone_append_sectors)

> + return -EINVAL;
> +
> + return 0;
> +}
> +
> void ublk_dev_param_zoned_apply(struct ublk_device *ub)
> {
> const struct ublk_param_zoned *p = &ub->params.zoned;
> @@ -23,6 +33,7 @@ void ublk_dev_param_zoned_apply(struct ublk_device 
> *ub)
> if (ub->dev_info.flags & UBLK_F_ZONED) {
> disk_set_max_active_zones(ub->ub_disk, p->max_active_zones);
> disk_set_max_open_zones(ub->ub_disk, p->max_open_zones);
> + blk_queue_max_zone_append_sectors(ub->ub_disk->queue,
> p->max_zone_append_sectors);
> }
> }
> 
> 
> diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
> index 88fa39853c61..6a949669b47e 100644
> --- a/drivers/block/ublk_drv.c
> +++ b/drivers/block/ublk_drv.c
> @@ -107,6 +107,11 @@ struct ublk_uring_cmd_pdu {
> */
> #define UBLK_IO_FLAG_NEED_GET_DATA 0x08
> 
> 
> +/*
> + * Set when IO is Zone Append
> + */
> +#define UBLK_IO_FLAG_ZONE_APPEND 0x10
> +
> struct ublk_io {
> /* userspace buffer address from io cmd */
> __u64 addr;
> @@ -230,6 +235,8 @@ static void ublk_dev_param_discard_apply(struct
> ublk_device *ub)
> 
> 
> static int ublk_validate_params(const struct ublk_device *ub)
> {
> + int ret = 0;
> +
> /* basic param is the only one which must be set */
> if (ub->params.types & UBLK_PARAM_TYPE_BASIC) {
> const struct ublk_param_basic *p = &ub->params.basic;
> @@ -260,6 +267,13 @@ static int ublk_validate_params(const struct
> ublk_device *ub)
> if (ub->params.types & UBLK_PARAM_TYPE_DEVT)
> return -EINVAL;
> 
> 
> + if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
> + (ub->params.types & UBLK_PARAM_TYPE_ZONED)) {
> + ret = ublk_dev_param_zoned_validate(ub);
> + if (ret)
> + return ret;
> + }
> +
> return 0;
> }
> 
> 
> @@ -690,6 +704,11 @@ static blk_status_t ublk_setup_iod(struct
> ublk_queue *ubq, struct request *req)
> return BLK_STS_IOERR;
> }
> case REQ_OP_ZONE_APPEND:
> + if (!(ubq->dev->dev_info.flags & UBLK_F_USER_COPY))
> + return BLK_STS_IOERR;
> + ublk_op = UBLK_IO_OP_ZONE_APPEND;
> + io->flags |= UBLK_IO_FLAG_ZONE_APPEND;
> + break;
> case REQ_OP_ZONE_RESET_ALL:
> case REQ_OP_DRV_OUT:
> /* We do not support zone append or reset_all yet */
> @@ -1112,6 +1131,12 @@ static void ublk_commit_completion(struct
> ublk_device *ub,
> /* find the io request and complete */
> req = blk_mq_tag_to_rq(ub->tag_set.tags[qid], tag);
> 
> 
> + if (IS_ENABLED(CONFIG_BLK_DEV_ZONED)) {
> + if (io->flags & UBLK_IO_FLAG_ZONE_APPEND)
> + req->__sector = ub_cmd->addr;
> + io->flags &= ~UBLK_IO_FLAG_ZONE_APPEND;
> + }
> +
> if (req && likely(!blk_should_fake_timeout(req->q)))
> ublk_put_req_ref(ubq, req);
> }
> @@ -1411,7 +1436,8 @@ static int __ublk_ch_uring_cmd(struct 
> io_uring_cmd *cmd,
> ^ (_IOC_NR(cmd_op) == UBLK_IO_NEED_GET_DATA))
> goto out;
> 
> 
> - if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
> + if (ublk_support_user_copy(ubq) &&
> + !(io->flags & UBLK_IO_FLAG_ZONE_APPEND) && ub_cmd->addr) {
> ret = -EINVAL;
> goto out;
> }
> @@ -1534,11 +1560,14 @@ static inline bool ublk_check_ubuf_dir(const
> struct request *req,
> int ubuf_dir)
> {
> /* copy ubuf to request pages */
> - if (req_op(req) == REQ_OP_READ && ubuf_dir == ITER_SOURCE)
> + if ((req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_DRV_IN) &&
> + ubuf_dir == ITER_SOURCE)
> return true;
> 
> 
> /* copy request pages to ubuf */
> - if (req_op(req) == REQ_OP_WRITE && ubuf_dir == ITER_DEST)
> + if ((req_op(req) == REQ_OP_WRITE ||
> + req_op(req) == REQ_OP_ZONE_APPEND) &&
> + ubuf_dir == ITER_DEST)
> return true;
> 
> 
> return false;
> @@ -1867,6 +1896,12 @@ static int ublk_ctrl_start_dev(struct
> ublk_device *ub, struct io_uring_cmd *cmd)
> ub->dev_info.ublksrv_pid = ublksrv_pid;
> ub->ub_disk = disk;
> 
> 
> + ub->dev_info.state = UBLK_S_DEV_LIVE;
> + if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
> + ub->dev_info.flags & UBLK_F_ZONED) {
> + disk_set_zoned(disk, BLK_ZONED_HM);
> + }
> +
> ret = ublk_apply_params(ub);
> if (ret)
> goto out_put_disk;
> @@ -1877,7 +1912,6 @@ static int ublk_ctrl_start_dev(struct
> ublk_device *ub, struct io_uring_cmd *cmd)
> 
> 
> if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
> ub->dev_info.flags & UBLK_F_ZONED) {
> - disk_set_zoned(disk, BLK_ZONED_HM);
> blk_queue_required_elevator_features(disk->queue, 
> ELEVATOR_F_ZBD_SEQ_WRITE);
> ret = ublk_revalidate_disk_zones(disk);
> if (ret)
> @@ -1885,7 +1919,6 @@ static int ublk_ctrl_start_dev(struct
> ublk_device *ub, struct io_uring_cmd *cmd)
> }
> 
> 
> get_device(&ub->cdev_dev);
> - ub->dev_info.state = UBLK_S_DEV_LIVE;
> ret = add_disk(disk);
> if (ret) {
> /*
> diff --git a/drivers/block/ublk_drv.h b/drivers/block/ublk_drv.h
> index 7242430fd6b9..f55e1c25531d 100644
> --- a/drivers/block/ublk_drv.h
> +++ b/drivers/block/ublk_drv.h
> @@ -56,6 +56,7 @@ struct ublk_rq_data {
> };
> 
> 
> void ublk_set_nr_zones(struct ublk_device *ub);
> +int ublk_dev_param_zoned_validate(const struct ublk_device *ub);
> void ublk_dev_param_zoned_apply(struct ublk_device *ub);
> int ublk_revalidate_disk_zones(struct gendisk *disk);
> 
> 
> diff --git a/include/uapi/linux/ublk_cmd.h 
> b/include/uapi/linux/ublk_cmd.h
> index 436525afffe8..4b6ad0b28598 100644
> --- a/include/uapi/linux/ublk_cmd.h
> +++ b/include/uapi/linux/ublk_cmd.h
> @@ -351,7 +351,8 @@ struct ublk_param_devt {
> struct ublk_param_zoned {
> __u32 max_open_zones;
> __u32 max_active_zones;
> - __u8 reserved[24];
> + __u32 max_zone_append_sectors;
> + __u8 reserved[20];
> };
> 
> 
> struct ublk_params {

Regards,
Aravind

Andreas Hindborg June 30, 2023, 4:33 p.m. UTC | #6

aravind.ramesh@opensource.wdc.com writes:

>> From: Andreas Hindborg <a.hindborg@samsung.com
>> <mailto:a.hindborg@samsung.com>>
>> Add zone append feature to ublk. This feature uses the `addr` field of `struct
>
> checkpatch.pl warns on the keeping the line within 75 characters.
> WARNING: Possible unwrapped commit description (prefer a maximum 75 chars per
> line)

Thanks, I will make sure to rerun the checker. I thought I ran it
already 😬

BR Andreas

>
>> ublksrv_io_cmd`. Therefore ublk must be used with the user copy
>> feature (UBLK_F_USER_COPY) for zone append to be available. Without this
>> feature, ublk will fail zone append requests.
>> Suggested-by: Ming Lei <ming.lei@redhat.com <mailto:ming.lei@redhat.com>>
>> Signed-off-by: Andreas Hindborg <a.hindborg@samsung.com
>> <mailto:a.hindborg@samsung.com>>
>> ---
>> drivers/block/ublk_drv-zoned.c | 11 +++++++++
>> drivers/block/ublk_drv.c | 43 ++++++++++++++++++++++++++++++----
>> drivers/block/ublk_drv.h | 1 +
>> include/uapi/linux/ublk_cmd.h | 3 ++-
>> 4 files changed, 52 insertions(+), 6 deletions(-)
>> diff --git a/drivers/block/ublk_drv-zoned.c b/drivers/block/ublk_drv-zoned.c
>> index ea86bf4b3681..007e8fc7ff25 100644
>> --- a/drivers/block/ublk_drv-zoned.c
>> +++ b/drivers/block/ublk_drv-zoned.c
>> @@ -16,6 +16,16 @@ void ublk_set_nr_zones(struct ublk_device *ub)
>> ub->ub_disk->nr_zones = p->dev_sectors / p->chunk_sectors;
>> }
>> +int ublk_dev_param_zoned_validate(const struct ublk_device *ub)
>> +{
>> + const struct ublk_param_zoned *p = &ub->params.zoned;
>> +
>> + if (! p->max_zone_append_sectors)
>
> checkpatch.pl errors out here
> ERROR: space prohibited after that '!' (ctx:BxW)
> if (!p->max_zone_append_sectors)
>
>> + return -EINVAL;
>> +
>> + return 0;
>> +}
>> +
>> void ublk_dev_param_zoned_apply(struct ublk_device *ub)
>> {
>> const struct ublk_param_zoned *p = &ub->params.zoned;
>> @@ -23,6 +33,7 @@ void ublk_dev_param_zoned_apply(struct ublk_device *ub)
>> if (ub->dev_info.flags & UBLK_F_ZONED) {
>> disk_set_max_active_zones(ub->ub_disk, p->max_active_zones);
>> disk_set_max_open_zones(ub->ub_disk, p->max_open_zones);
>> + blk_queue_max_zone_append_sectors(ub->ub_disk->queue,
>> p->max_zone_append_sectors);
>> }
>> }
>> diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
>> index 88fa39853c61..6a949669b47e 100644
>> --- a/drivers/block/ublk_drv.c
>> +++ b/drivers/block/ublk_drv.c
>> @@ -107,6 +107,11 @@ struct ublk_uring_cmd_pdu {
>> */
>> #define UBLK_IO_FLAG_NEED_GET_DATA 0x08
>> +/*
>> + * Set when IO is Zone Append
>> + */
>> +#define UBLK_IO_FLAG_ZONE_APPEND 0x10
>> +
>> struct ublk_io {
>> /* userspace buffer address from io cmd */
>> __u64 addr;
>> @@ -230,6 +235,8 @@ static void ublk_dev_param_discard_apply(struct
>> ublk_device *ub)
>> static int ublk_validate_params(const struct ublk_device *ub)
>> {
>> + int ret = 0;
>> +
>> /* basic param is the only one which must be set */
>> if (ub->params.types & UBLK_PARAM_TYPE_BASIC) {
>> const struct ublk_param_basic *p = &ub->params.basic;
>> @@ -260,6 +267,13 @@ static int ublk_validate_params(const struct
>> ublk_device *ub)
>> if (ub->params.types & UBLK_PARAM_TYPE_DEVT)
>> return -EINVAL;
>> + if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
>> + (ub->params.types & UBLK_PARAM_TYPE_ZONED)) {
>> + ret = ublk_dev_param_zoned_validate(ub);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> return 0;
>> }
>> @@ -690,6 +704,11 @@ static blk_status_t ublk_setup_iod(struct
>> ublk_queue *ubq, struct request *req)
>> return BLK_STS_IOERR;
>> }
>> case REQ_OP_ZONE_APPEND:
>> + if (!(ubq->dev->dev_info.flags & UBLK_F_USER_COPY))
>> + return BLK_STS_IOERR;
>> + ublk_op = UBLK_IO_OP_ZONE_APPEND;
>> + io->flags |= UBLK_IO_FLAG_ZONE_APPEND;
>> + break;
>> case REQ_OP_ZONE_RESET_ALL:
>> case REQ_OP_DRV_OUT:
>> /* We do not support zone append or reset_all yet */
>> @@ -1112,6 +1131,12 @@ static void ublk_commit_completion(struct
>> ublk_device *ub,
>> /* find the io request and complete */
>> req = blk_mq_tag_to_rq(ub->tag_set.tags[qid], tag);
>> + if (IS_ENABLED(CONFIG_BLK_DEV_ZONED)) {
>> + if (io->flags & UBLK_IO_FLAG_ZONE_APPEND)
>> + req->__sector = ub_cmd->addr;
>> + io->flags &= ~UBLK_IO_FLAG_ZONE_APPEND;
>> + }
>> +
>> if (req && likely(!blk_should_fake_timeout(req->q)))
>> ublk_put_req_ref(ubq, req);
>> }
>> @@ -1411,7 +1436,8 @@ static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
>> ^ (_IOC_NR(cmd_op) == UBLK_IO_NEED_GET_DATA))
>> goto out;
>> - if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
>> + if (ublk_support_user_copy(ubq) &&
>> + !(io->flags & UBLK_IO_FLAG_ZONE_APPEND) && ub_cmd->addr) {
>> ret = -EINVAL;
>> goto out;
>> }
>> @@ -1534,11 +1560,14 @@ static inline bool ublk_check_ubuf_dir(const
>> struct request *req,
>> int ubuf_dir)
>> {
>> /* copy ubuf to request pages */
>> - if (req_op(req) == REQ_OP_READ && ubuf_dir == ITER_SOURCE)
>> + if ((req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_DRV_IN) &&
>> + ubuf_dir == ITER_SOURCE)
>> return true;
>> /* copy request pages to ubuf */
>> - if (req_op(req) == REQ_OP_WRITE && ubuf_dir == ITER_DEST)
>> + if ((req_op(req) == REQ_OP_WRITE ||
>> + req_op(req) == REQ_OP_ZONE_APPEND) &&
>> + ubuf_dir == ITER_DEST)
>> return true;
>> return false;
>> @@ -1867,6 +1896,12 @@ static int ublk_ctrl_start_dev(struct
>> ublk_device *ub, struct io_uring_cmd *cmd)
>> ub->dev_info.ublksrv_pid = ublksrv_pid;
>> ub->ub_disk = disk;
>> + ub->dev_info.state = UBLK_S_DEV_LIVE;
>> + if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
>> + ub->dev_info.flags & UBLK_F_ZONED) {
>> + disk_set_zoned(disk, BLK_ZONED_HM);
>> + }
>> +
>> ret = ublk_apply_params(ub);
>> if (ret)
>> goto out_put_disk;
>> @@ -1877,7 +1912,6 @@ static int ublk_ctrl_start_dev(struct
>> ublk_device *ub, struct io_uring_cmd *cmd)
>> if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
>> ub->dev_info.flags & UBLK_F_ZONED) {
>> - disk_set_zoned(disk, BLK_ZONED_HM);
>> blk_queue_required_elevator_features(disk->queue, ELEVATOR_F_ZBD_SEQ_WRITE);
>> ret = ublk_revalidate_disk_zones(disk);
>> if (ret)
>> @@ -1885,7 +1919,6 @@ static int ublk_ctrl_start_dev(struct
>> ublk_device *ub, struct io_uring_cmd *cmd)
>> }
>> get_device(&ub->cdev_dev);
>> - ub->dev_info.state = UBLK_S_DEV_LIVE;
>> ret = add_disk(disk);
>> if (ret) {
>> /*
>> diff --git a/drivers/block/ublk_drv.h b/drivers/block/ublk_drv.h
>> index 7242430fd6b9..f55e1c25531d 100644
>> --- a/drivers/block/ublk_drv.h
>> +++ b/drivers/block/ublk_drv.h
>> @@ -56,6 +56,7 @@ struct ublk_rq_data {
>> };
>> void ublk_set_nr_zones(struct ublk_device *ub);
>> +int ublk_dev_param_zoned_validate(const struct ublk_device *ub);
>> void ublk_dev_param_zoned_apply(struct ublk_device *ub);
>> int ublk_revalidate_disk_zones(struct gendisk *disk);
>> diff --git a/include/uapi/linux/ublk_cmd.h b/include/uapi/linux/ublk_cmd.h
>> index 436525afffe8..4b6ad0b28598 100644
>> --- a/include/uapi/linux/ublk_cmd.h
>> +++ b/include/uapi/linux/ublk_cmd.h
>> @@ -351,7 +351,8 @@ struct ublk_param_devt {
>> struct ublk_param_zoned {
>> __u32 max_open_zones;
>> __u32 max_active_zones;
>> - __u8 reserved[24];
>> + __u32 max_zone_append_sectors;
>> + __u8 reserved[20];
>> };
>> struct ublk_params {
>
> Regards,
> Aravind

diff mbox series

Patch

diff --git a/drivers/block/ublk_drv-zoned.c b/drivers/block/ublk_drv-zoned.c
index ea86bf4b3681..007e8fc7ff25 100644
--- a/drivers/block/ublk_drv-zoned.c
+++ b/drivers/block/ublk_drv-zoned.c
@@ -16,6 +16,16 @@  void ublk_set_nr_zones(struct ublk_device *ub)
 		ub->ub_disk->nr_zones = p->dev_sectors / p->chunk_sectors;
 }
 
+int ublk_dev_param_zoned_validate(const struct ublk_device *ub)
+{
+	const struct ublk_param_zoned *p = &ub->params.zoned;
+
+	if (! p->max_zone_append_sectors)
+		return -EINVAL;
+
+	return 0;
+}
+
 void ublk_dev_param_zoned_apply(struct ublk_device *ub)
 {
 	const struct ublk_param_zoned *p = &ub->params.zoned;
@@ -23,6 +33,7 @@  void ublk_dev_param_zoned_apply(struct ublk_device *ub)
 	if (ub->dev_info.flags & UBLK_F_ZONED) {
 		disk_set_max_active_zones(ub->ub_disk, p->max_active_zones);
 		disk_set_max_open_zones(ub->ub_disk, p->max_open_zones);
+		blk_queue_max_zone_append_sectors(ub->ub_disk->queue, p->max_zone_append_sectors);
 	}
 }
 
diff --git a/drivers/block/ublk_drv.c b/drivers/block/ublk_drv.c
index 88fa39853c61..6a949669b47e 100644
--- a/drivers/block/ublk_drv.c
+++ b/drivers/block/ublk_drv.c
@@ -107,6 +107,11 @@  struct ublk_uring_cmd_pdu {
  */
 #define UBLK_IO_FLAG_NEED_GET_DATA 0x08
 
+/*
+ * Set when IO is Zone Append
+ */
+#define UBLK_IO_FLAG_ZONE_APPEND 0x10
+
 struct ublk_io {
 	/* userspace buffer address from io cmd */
 	__u64	addr;
@@ -230,6 +235,8 @@  static void ublk_dev_param_discard_apply(struct ublk_device *ub)
 
 static int ublk_validate_params(const struct ublk_device *ub)
 {
+	int ret = 0;
+
 	/* basic param is the only one which must be set */
 	if (ub->params.types & UBLK_PARAM_TYPE_BASIC) {
 		const struct ublk_param_basic *p = &ub->params.basic;
@@ -260,6 +267,13 @@  static int ublk_validate_params(const struct ublk_device *ub)
 	if (ub->params.types & UBLK_PARAM_TYPE_DEVT)
 		return -EINVAL;
 
+	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
+	    (ub->params.types & UBLK_PARAM_TYPE_ZONED)) {
+		ret = ublk_dev_param_zoned_validate(ub);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 
@@ -690,6 +704,11 @@  static blk_status_t ublk_setup_iod(struct ublk_queue *ubq, struct request *req)
 			return BLK_STS_IOERR;
 		}
 	case REQ_OP_ZONE_APPEND:
+		if (!(ubq->dev->dev_info.flags & UBLK_F_USER_COPY))
+			return BLK_STS_IOERR;
+		ublk_op = UBLK_IO_OP_ZONE_APPEND;
+		io->flags |= UBLK_IO_FLAG_ZONE_APPEND;
+		break;
 	case REQ_OP_ZONE_RESET_ALL:
 	case REQ_OP_DRV_OUT:
 		/* We do not support zone append or reset_all yet */
@@ -1112,6 +1131,12 @@  static void ublk_commit_completion(struct ublk_device *ub,
 	/* find the io request and complete */
 	req = blk_mq_tag_to_rq(ub->tag_set.tags[qid], tag);
 
+	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED)) {
+		if (io->flags & UBLK_IO_FLAG_ZONE_APPEND)
+			req->__sector = ub_cmd->addr;
+		io->flags &= ~UBLK_IO_FLAG_ZONE_APPEND;
+	}
+
 	if (req && likely(!blk_should_fake_timeout(req->q)))
 		ublk_put_req_ref(ubq, req);
 }
@@ -1411,7 +1436,8 @@  static int __ublk_ch_uring_cmd(struct io_uring_cmd *cmd,
 			^ (_IOC_NR(cmd_op) == UBLK_IO_NEED_GET_DATA))
 		goto out;
 
-	if (ublk_support_user_copy(ubq) && ub_cmd->addr) {
+	if (ublk_support_user_copy(ubq) &&
+	    !(io->flags & UBLK_IO_FLAG_ZONE_APPEND) && ub_cmd->addr) {
 		ret = -EINVAL;
 		goto out;
 	}
@@ -1534,11 +1560,14 @@  static inline bool ublk_check_ubuf_dir(const struct request *req,
 		int ubuf_dir)
 {
 	/* copy ubuf to request pages */
-	if (req_op(req) == REQ_OP_READ && ubuf_dir == ITER_SOURCE)
+	if ((req_op(req) == REQ_OP_READ || req_op(req) == REQ_OP_DRV_IN) &&
+	    ubuf_dir == ITER_SOURCE)
 		return true;
 
 	/* copy request pages to ubuf */
-	if (req_op(req) == REQ_OP_WRITE && ubuf_dir == ITER_DEST)
+	if ((req_op(req) == REQ_OP_WRITE ||
+	     req_op(req) == REQ_OP_ZONE_APPEND) &&
+	    ubuf_dir == ITER_DEST)
 		return true;
 
 	return false;
@@ -1867,6 +1896,12 @@  static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
 	ub->dev_info.ublksrv_pid = ublksrv_pid;
 	ub->ub_disk = disk;
 
+	ub->dev_info.state = UBLK_S_DEV_LIVE;
+	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
+	    ub->dev_info.flags & UBLK_F_ZONED) {
+		disk_set_zoned(disk, BLK_ZONED_HM);
+	}
+
 	ret = ublk_apply_params(ub);
 	if (ret)
 		goto out_put_disk;
@@ -1877,7 +1912,6 @@  static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
 
 	if (IS_ENABLED(CONFIG_BLK_DEV_ZONED) &&
 	    ub->dev_info.flags & UBLK_F_ZONED) {
-		disk_set_zoned(disk, BLK_ZONED_HM);
 		blk_queue_required_elevator_features(disk->queue, ELEVATOR_F_ZBD_SEQ_WRITE);
 		ret = ublk_revalidate_disk_zones(disk);
 		if (ret)
@@ -1885,7 +1919,6 @@  static int ublk_ctrl_start_dev(struct ublk_device *ub, struct io_uring_cmd *cmd)
 	}
 
 	get_device(&ub->cdev_dev);
-	ub->dev_info.state = UBLK_S_DEV_LIVE;
 	ret = add_disk(disk);
 	if (ret) {
 		/*
diff --git a/drivers/block/ublk_drv.h b/drivers/block/ublk_drv.h
index 7242430fd6b9..f55e1c25531d 100644
--- a/drivers/block/ublk_drv.h
+++ b/drivers/block/ublk_drv.h
@@ -56,6 +56,7 @@  struct ublk_rq_data {
 };
 
 void ublk_set_nr_zones(struct ublk_device *ub);
+int ublk_dev_param_zoned_validate(const struct ublk_device *ub);
 void ublk_dev_param_zoned_apply(struct ublk_device *ub);
 int ublk_revalidate_disk_zones(struct gendisk *disk);
 
diff --git a/include/uapi/linux/ublk_cmd.h b/include/uapi/linux/ublk_cmd.h
index 436525afffe8..4b6ad0b28598 100644
--- a/include/uapi/linux/ublk_cmd.h
+++ b/include/uapi/linux/ublk_cmd.h
@@ -351,7 +351,8 @@  struct ublk_param_devt {
 struct ublk_param_zoned {
 	__u32	max_open_zones;
 	__u32	max_active_zones;
-	__u8	reserved[24];
+	__u32   max_zone_append_sectors;
+	__u8	reserved[20];
 };
 
 struct ublk_params {