On Thu, 03 Nov 2022 15:00:30 +0200, Cosmin Tanislav wrote:
> From: Cosmin Tanislav <cosmin.tanislav@analog.com>
>
> Binding properties should have default values to let the reader
> know if they should change it. Add them based on driver logic.
>
> Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
> ---
> .../devicetree/bindings/iio/temperature/adi,ltc2983.yaml | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
Reviewed-by: Rob Herring <robh@kernel.org>
@@ -34,6 +34,7 @@ properties:
cases. An extra delay can be configured using this property. The value is
rounded to nearest 100us.
maximum: 255
+ default: 0
adi,filter-notch-freq:
description:
@@ -45,6 +46,7 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 2
+ default: 0
'#address-cells':
const: 1
@@ -104,6 +106,7 @@ patternProperties:
This property set's the pulsed current value applied during
open-circuit detect.
enum: [10, 100, 500, 1000]
+ default: 10
adi,cold-junction-handle:
description:
@@ -163,6 +166,7 @@ patternProperties:
cycles, this property will assume different predefined values on
each cycle. Just set the value of the first cycle (1l).
enum: [10, 20, 40, 80]
+ default: 10
adi,ideal-factor-value:
description:
@@ -170,6 +174,7 @@ patternProperties:
be multiplied by 1000000 to remove the fractional part. For more
information look at table 20 of the datasheet.
$ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
"^rtd@":
type: object
@@ -207,6 +212,7 @@ patternProperties:
property to 5 means 4 wires with Kelvin Rsense.
$ref: /schemas/types.yaml#/definitions/uint32
enum: [2, 3, 4, 5]
+ default: 2
adi,rsense-share:
description:
@@ -226,6 +232,7 @@ patternProperties:
This property controls the magnitude of the excitation current
applied to the RTD.
enum: [5, 10, 25, 50, 100, 250, 500, 1000]
+ default: 5
adi,rtd-curve:
description:
@@ -234,6 +241,7 @@ patternProperties:
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3
+ default: 0
adi,custom-rtd:
description:
@@ -308,6 +316,7 @@ patternProperties:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000,
500000, 1000000]
+ default: 0
adi,custom-thermistor:
description: