[1/7] soc: renesas: r9a06g032-sysctrl: Export function to get H2MODE from CFG_USB register

Message ID 20221107135825.583877-2-herve.codina@bootlin.com
State New
Headers
Series Add the Renesas USBF controller support |

Commit Message

Herve Codina Nov. 7, 2022, 1:58 p.m. UTC
  The CFG_USB register is located within the system controller.

We need a helper to get the H2MODE value from the CFG_USB register
without syscon.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
 drivers/clk/renesas/r9a06g032-clocks.c        | 18 ++++++++++++++++++
 include/linux/soc/renesas/r9a06g032-sysctrl.h |  2 ++
 2 files changed, 20 insertions(+)
  

Comments

Geert Uytterhoeven Nov. 7, 2022, 2:40 p.m. UTC | #1
Hi Hervé,

On Mon, Nov 7, 2022 at 2:59 PM Herve Codina <herve.codina@bootlin.com> wrote:
> The CFG_USB register is located within the system controller.
>
> We need a helper to get the H2MODE value from the CFG_USB register
> without syscon.
>
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>

> --- a/drivers/clk/renesas/r9a06g032-clocks.c
> +++ b/drivers/clk/renesas/r9a06g032-clocks.c
> @@ -25,6 +25,8 @@
>  #include <linux/spinlock.h>
>  #include <dt-bindings/clock/r9a06g032-sysctrl.h>
>
> +#define R9A06G032_SYSCTRL_USB    0x00
> +#define R9A06G032_SYSCTRL_USB_H2MODE  (1<<1)
>  #define R9A06G032_SYSCTRL_DMAMUX 0xA0
>
>  struct r9a06g032_gate {
> @@ -341,6 +343,22 @@ int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val)
>  }
>  EXPORT_SYMBOL_GPL(r9a06g032_sysctrl_set_dmamux);
>
> +
> +/* Exported helper to get the H2MODE bit from USB register */
> +int r9a06g032_sysctrl_get_usb_h2mode(bool *h2mode)
> +{
> +       u32 usb;
> +
> +       if (!sysctrl_priv)
> +               return -EPROBE_DEFER;
> +
> +       usb = readl(sysctrl_priv->reg + R9A06G032_SYSCTRL_USB);
> +       *h2mode = (usb & R9A06G032_SYSCTRL_USB_H2MODE) ? true : false;
> +
> +       return 0;

Perhaps not pass *h2mode, but just return USB_ROLE_{HOST,DEVICE}
(enum usb_role in <linux/usb/role.h>), or a negative error code?

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
  
Herve Codina Nov. 10, 2022, 8:02 a.m. UTC | #2
Hi Geert,

Oops, my bad I removed all people from the email previously.
Re-added them on this reply. 

On Mon, 7 Nov 2022 20:23:06 +0100
Geert Uytterhoeven <geert@linux-m68k.org> wrote:

> Hi Hervé,
> 
> On Mon, Nov 7, 2022 at 5:54 PM Herve Codina <herve.codina@bootlin.com> wrote:
> > On Mon, 7 Nov 2022 15:40:53 +0100
> > Geert Uytterhoeven <geert@linux-m68k.org> wrote:  
> > > On Mon, Nov 7, 2022 at 2:59 PM Herve Codina <herve.codina@bootlin.com> wrote:  
> > > > The CFG_USB register is located within the system controller.
> > > >
> > > > We need a helper to get the H2MODE value from the CFG_USB register
> > > > without syscon.
> > > >
> > > > Signed-off-by: Herve Codina <herve.codina@bootlin.com>  
> > >  
> > > > --- a/drivers/clk/renesas/r9a06g032-clocks.c
> > > > +++ b/drivers/clk/renesas/r9a06g032-clocks.c
> > > > @@ -25,6 +25,8 @@
> > > >  #include <linux/spinlock.h>
> > > >  #include <dt-bindings/clock/r9a06g032-sysctrl.h>
> > > >
> > > > +#define R9A06G032_SYSCTRL_USB    0x00
> > > > +#define R9A06G032_SYSCTRL_USB_H2MODE  (1<<1)
> > > >  #define R9A06G032_SYSCTRL_DMAMUX 0xA0
> > > >
> > > >  struct r9a06g032_gate {
> > > > @@ -341,6 +343,22 @@ int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val)
> > > >  }
> > > >  EXPORT_SYMBOL_GPL(r9a06g032_sysctrl_set_dmamux);
> > > >
> > > > +
> > > > +/* Exported helper to get the H2MODE bit from USB register */
> > > > +int r9a06g032_sysctrl_get_usb_h2mode(bool *h2mode)
> > > > +{
> > > > +       u32 usb;
> > > > +
> > > > +       if (!sysctrl_priv)
> > > > +               return -EPROBE_DEFER;
> > > > +
> > > > +       usb = readl(sysctrl_priv->reg + R9A06G032_SYSCTRL_USB);
> > > > +       *h2mode = (usb & R9A06G032_SYSCTRL_USB_H2MODE) ? true : false;
> > > > +
> > > > +       return 0;  
> > >
> > > Perhaps not pass *h2mode, but just return USB_ROLE_{HOST,DEVICE}
> > > (enum usb_role in <linux/usb/role.h>), or a negative error code?  
> >
> > Yes, good idea.
> > I will also rename the function :
> >   enum usb_role r9a06g032_sysctrl_get_usb_role(void);
> >
> > Is that ok for you or do you prefer that I keep the previous name ?  
> 
> r9a06g032_sysctrl_get_usb_role() sounds fine!
> But it should return "int", as the return value can be a negative error code,
> too.

All right, I will do that in v2 series.

Thanks,
Hervé
  

Patch

diff --git a/drivers/clk/renesas/r9a06g032-clocks.c b/drivers/clk/renesas/r9a06g032-clocks.c
index 1488c9d6e639..c07131c47a9f 100644
--- a/drivers/clk/renesas/r9a06g032-clocks.c
+++ b/drivers/clk/renesas/r9a06g032-clocks.c
@@ -25,6 +25,8 @@ 
 #include <linux/spinlock.h>
 #include <dt-bindings/clock/r9a06g032-sysctrl.h>
 
+#define R9A06G032_SYSCTRL_USB    0x00
+#define R9A06G032_SYSCTRL_USB_H2MODE  (1<<1)
 #define R9A06G032_SYSCTRL_DMAMUX 0xA0
 
 struct r9a06g032_gate {
@@ -341,6 +343,22 @@  int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val)
 }
 EXPORT_SYMBOL_GPL(r9a06g032_sysctrl_set_dmamux);
 
+
+/* Exported helper to get the H2MODE bit from USB register */
+int r9a06g032_sysctrl_get_usb_h2mode(bool *h2mode)
+{
+	u32 usb;
+
+	if (!sysctrl_priv)
+		return -EPROBE_DEFER;
+
+	usb = readl(sysctrl_priv->reg + R9A06G032_SYSCTRL_USB);
+	*h2mode = (usb & R9A06G032_SYSCTRL_USB_H2MODE) ? true : false;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(r9a06g032_sysctrl_get_usb_h2mode);
+
 /* register/bit pairs are encoded as an uint16_t */
 static void
 clk_rdesc_set(struct r9a06g032_priv *clocks,
diff --git a/include/linux/soc/renesas/r9a06g032-sysctrl.h b/include/linux/soc/renesas/r9a06g032-sysctrl.h
index 066dfb15cbdd..095e00f27309 100644
--- a/include/linux/soc/renesas/r9a06g032-sysctrl.h
+++ b/include/linux/soc/renesas/r9a06g032-sysctrl.h
@@ -4,8 +4,10 @@ 
 
 #ifdef CONFIG_CLK_R9A06G032
 int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val);
+int r9a06g032_sysctrl_get_usb_h2mode(bool *h2mode);
 #else
 static inline int r9a06g032_sysctrl_set_dmamux(u32 mask, u32 val) { return -ENODEV; }
+static inline int r9a06g032_sysctrl_get_usb_h2mode(bool *h2mode) { return -ENODEV; }
 #endif
 
 #endif /* __LINUX_SOC_RENESAS_R9A06G032_SYSCTRL_H__ */