phy: qcom: qmp-combo: fix Display Port PHY configuration for SM8550
Commit Message
The SM8550 PHY also uses a different offset for the CMN_STATUS reg,
use the right one for the v6 Display Port configuration.
Fixes: 49742e9edab3 ("phy: qcom-qmp-combo: Add support for SM8550")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
---
base-commit: d4cee89031c80066ec461bb77b5e13a4f37d5fd2
change-id: 20230601-topic-sm8550-upstream-dp-phy-init-fix-ed90c001592d
Best regards,
Comments
Hi Vinod,
On 01/06/2023 11:39, Neil Armstrong wrote:
> The SM8550 PHY also uses a different offset for the CMN_STATUS reg,
> use the right one for the v6 Display Port configuration.
>
> Fixes: 49742e9edab3 ("phy: qcom-qmp-combo: Add support for SM8550")
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
<snip>
Gentle ping!
This fix is needed to have functional DisplayPort on SM8550,
Thanks,
Neil
On 01-06-23, 11:39, Neil Armstrong wrote:
> The SM8550 PHY also uses a different offset for the CMN_STATUS reg,
> use the right one for the v6 Display Port configuration.
Applied, thanks
@@ -2151,6 +2151,7 @@ static void qmp_v4_configure_dp_tx(struct qmp_combo *qmp)
static int qmp_v456_configure_dp_phy(struct qmp_combo *qmp,
unsigned int com_resetm_ctrl_reg,
unsigned int com_c_ready_status_reg,
+ unsigned int com_cmn_status_reg,
unsigned int dp_phy_status_reg)
{
const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
@@ -2207,14 +2208,14 @@ static int qmp_v456_configure_dp_phy(struct qmp_combo *qmp,
10000))
return -ETIMEDOUT;
- if (readl_poll_timeout(qmp->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
+ if (readl_poll_timeout(qmp->dp_serdes + com_cmn_status_reg,
status,
((status & BIT(0)) > 0),
500,
10000))
return -ETIMEDOUT;
- if (readl_poll_timeout(qmp->dp_serdes + QSERDES_V4_COM_CMN_STATUS,
+ if (readl_poll_timeout(qmp->dp_serdes + com_cmn_status_reg,
status,
((status & BIT(1)) > 0),
500,
@@ -2250,6 +2251,7 @@ static int qmp_v4_configure_dp_phy(struct qmp_combo *qmp)
ret = qmp_v456_configure_dp_phy(qmp, QSERDES_V4_COM_RESETSM_CNTRL,
QSERDES_V4_COM_C_READY_STATUS,
+ QSERDES_V4_COM_CMN_STATUS,
QSERDES_V4_DP_PHY_STATUS);
if (ret < 0)
return ret;
@@ -2314,6 +2316,7 @@ static int qmp_v5_configure_dp_phy(struct qmp_combo *qmp)
ret = qmp_v456_configure_dp_phy(qmp, QSERDES_V4_COM_RESETSM_CNTRL,
QSERDES_V4_COM_C_READY_STATUS,
+ QSERDES_V4_COM_CMN_STATUS,
QSERDES_V4_DP_PHY_STATUS);
if (ret < 0)
return ret;
@@ -2373,6 +2376,7 @@ static int qmp_v6_configure_dp_phy(struct qmp_combo *qmp)
ret = qmp_v456_configure_dp_phy(qmp, QSERDES_V6_COM_RESETSM_CNTRL,
QSERDES_V6_COM_C_READY_STATUS,
+ QSERDES_V6_COM_CMN_STATUS,
QSERDES_V6_DP_PHY_STATUS);
if (ret < 0)
return ret;