diff mbox series

[v7,12/12] dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string

Message ID 20230616153438.2299922-13-Frank.Li@nxp.com
State New
Headers
Series dmaengine: edma: add freescale edma v3 support |

Commit Message

Frank Li June 16, 2023, 3:34 p.m. UTC 
  Extend Freescale eDMA driver bindings to support eDMA3 IP blocks in
i.MX8QM and i.MX8QXP SoCs. In i.MX93, both eDMA3 and eDMA4 are now.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../devicetree/bindings/dma/fsl,edma.yaml     | 103 ++++++++++++++++--
 1 file changed, 96 insertions(+), 7 deletions(-)

Comments

Krzysztof Kozlowski June 17, 2023, 8:57 a.m. UTC | #1 
On 16/06/2023 17:34, Frank Li wrote:
> Extend Freescale eDMA driver bindings to support eDMA3 IP blocks in
> i.MX8QM and i.MX8QXP SoCs. In i.MX93, both eDMA3 and eDMA4 are now.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  .../devicetree/bindings/dma/fsl,edma.yaml     | 103 ++++++++++++++++--
>  1 file changed, 96 insertions(+), 7 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
> index 5fd8fc604261..2363c10e0d1c 100644
> --- a/Documentation/devicetree/bindings/dma/fsl,edma.yaml
> +++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
> @@ -21,32 +21,41 @@ properties:
>        - enum:
>            - fsl,vf610-edma
>            - fsl,imx7ulp-edma
> +          - fsl,imx8qm-adma
> +          - fsl,imx8qm-edma
> +          - fsl,imx93-edma3
> +          - fsl,imx93-edma4
>        - items:
>            - const: fsl,ls1028a-edma
>            - const: fsl,vf610-edma
>  
>    reg:
> -    minItems: 2
> +    minItems: 1
>      maxItems: 3
>  
>    interrupts:
> -    minItems: 2
> -    maxItems: 17
> +    minItems: 1
> +    maxItems: 64
>  
>    interrupt-names:
> -    minItems: 2
> -    maxItems: 17
> +    minItems: 1
> +    maxItems: 64
>  
>    "#dma-cells":
> -    const: 2
> +    enum:
> +      - 2
> +      - 3
>  
>    dma-channels:
> -    const: 32
> +    minItems: 1
> +    maxItems: 64
>  
>    clocks:
> +    minItems: 1
>      maxItems: 2
>  
>    clock-names:
> +    minItems: 1
>      maxItems: 2
>  
>    big-endian:
> @@ -65,6 +74,26 @@ required:
>  
>  allOf:
>    - $ref: dma-controller.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - fsl,imx8qm-adma
> +              - fsl,imx8qm-edma
> +              - fsl,imx93-edma3
> +              - fsl,imx93-edma4
> +    then:
> +      properties:
> +        "#dma-cells":
> +          const: 3
> +        # It is not necessary to write the interrupt name for each channel.
> +        # instead, you can simply maintain the sequential IRQ numbers as
> +        # defined for the DMA channels.
> +        interrupt-names: false
> +        clock-names:

items:
  - const: dma

missing clocks...

oh wait, I already said this. Let's use reviewers time for doing the
same review, why not. They work for free.

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
index 5fd8fc604261..2363c10e0d1c 100644
--- a/Documentation/devicetree/bindings/dma/fsl,edma.yaml
+++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
@@ -21,32 +21,41 @@  properties:
       - enum:
           - fsl,vf610-edma
           - fsl,imx7ulp-edma
+          - fsl,imx8qm-adma
+          - fsl,imx8qm-edma
+          - fsl,imx93-edma3
+          - fsl,imx93-edma4
       - items:
           - const: fsl,ls1028a-edma
           - const: fsl,vf610-edma
 
   reg:
-    minItems: 2
+    minItems: 1
     maxItems: 3
 
   interrupts:
-    minItems: 2
-    maxItems: 17
+    minItems: 1
+    maxItems: 64
 
   interrupt-names:
-    minItems: 2
-    maxItems: 17
+    minItems: 1
+    maxItems: 64
 
   "#dma-cells":
-    const: 2
+    enum:
+      - 2
+      - 3
 
   dma-channels:
-    const: 32
+    minItems: 1
+    maxItems: 64
 
   clocks:
+    minItems: 1
     maxItems: 2
 
   clock-names:
+    minItems: 1
     maxItems: 2
 
   big-endian:
@@ -65,6 +74,26 @@  required:
 
 allOf:
   - $ref: dma-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,imx8qm-adma
+              - fsl,imx8qm-edma
+              - fsl,imx93-edma3
+              - fsl,imx93-edma4
+    then:
+      properties:
+        "#dma-cells":
+          const: 3
+        # It is not necessary to write the interrupt name for each channel.
+        # instead, you can simply maintain the sequential IRQ numbers as
+        # defined for the DMA channels.
+        interrupt-names: false
+        clock-names:
+          const: dma
+
   - if:
       properties:
         compatible:
@@ -72,18 +101,26 @@  allOf:
             const: fsl,vf610-edma
     then:
       properties:
+        clocks:
+          minItems: 2
         clock-names:
           items:
             - const: dmamux0
             - const: dmamux1
         interrupts:
+          minItems: 2
           maxItems: 2
         interrupt-names:
           items:
             - const: edma-tx
             - const: edma-err
         reg:
+          minItems: 2
           maxItems: 3
+        "#dma-cells":
+          const: 2
+        dma-channels:
+          const: 32
 
   - if:
       properties:
@@ -92,14 +129,22 @@  allOf:
             const: fsl,imx7ulp-edma
     then:
       properties:
+        clock:
+          minItems: 2
         clock-names:
           items:
             - const: dma
             - const: dmamux0
         interrupts:
+          minItems: 2
           maxItems: 17
         reg:
+          minItems: 2
           maxItems: 2
+        "#dma-cells":
+          const: 2
+        dma-channels:
+          const: 32
 
 unevaluatedProperties: false
 
@@ -153,3 +198,47 @@  examples:
        clock-names = "dma", "dmamux0";
        clocks = <&pcc2 IMX7ULP_CLK_DMA1>, <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/imx93-clock.h>
+
+    dma-controller@44000000 {
+      compatible = "fsl,imx93-edma3";
+      reg = <0x44000000 0x200000>;
+      #dma-cells = <3>;
+      dma-channels = <31>;
+      interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&clk IMX93_CLK_EDMA1_GATE>;
+        clock-names = "dma";
+    };