diff mbox series

[v2] mhi: pci_generic: add support for sc8280xp-crd SDX55 variant

Message ID 20221104093913.23347-1-johan+linaro@kernel.org
State New
Headers
Series [v2] mhi: pci_generic: add support for sc8280xp-crd SDX55 variant |

Commit Message

Johan Hovold Nov. 4, 2022, 9:39 a.m. UTC 
  The SC8280XP Compute Reference Design (CRD) has an on-PCB SDX55 modem
which uses MBIM.

The exact channel configuration is not known but the Foxconn SDX55
configuration allows the modem to be used so reuse that one for now.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---

Changes in v2
 - drop comment describing this variant (Mani)


 drivers/bus/mhi/host/pci_generic.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

Manivannan Sadhasivam Nov. 7, 2022, 7:41 a.m. UTC | #1 
On Fri, Nov 04, 2022 at 10:39:13AM +0100, Johan Hovold wrote:
> The SC8280XP Compute Reference Design (CRD) has an on-PCB SDX55 modem
> which uses MBIM.
> 
> The exact channel configuration is not known but the Foxconn SDX55
> configuration allows the modem to be used so reuse that one for now.
> 
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>

Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>

Thanks,
Mani

> ---
> 
> Changes in v2
>  - drop comment describing this variant (Mani)
> 
> 
>  drivers/bus/mhi/host/pci_generic.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
> index caa4ce28cf9e..7dcd0ef3184a 100644
> --- a/drivers/bus/mhi/host/pci_generic.c
> +++ b/drivers/bus/mhi/host/pci_generic.c
> @@ -542,6 +542,8 @@ static const struct mhi_pci_dev_info mhi_telit_fn990_info = {
>  static const struct pci_device_id mhi_pci_id_table[] = {
>  	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304),
>  		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info },
> +	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, PCI_VENDOR_ID_QCOM, 0x010c),
> +		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
>  	/* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */
>  	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200),
>  		.driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info },
> -- 
> 2.37.3
> 
>
Manivannan Sadhasivam Nov. 7, 2022, 11:42 a.m. UTC | #2 
On Fri, Nov 04, 2022 at 10:39:13AM +0100, Johan Hovold wrote:
> The SC8280XP Compute Reference Design (CRD) has an on-PCB SDX55 modem
> which uses MBIM.
> 
> The exact channel configuration is not known but the Foxconn SDX55
> configuration allows the modem to be used so reuse that one for now.
> 
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>

Modified the subject to the format "bus: mhi: host: pci_generic" and applied
to mhi-next!

Thanks,
Mani

> ---
> 
> Changes in v2
>  - drop comment describing this variant (Mani)
> 
> 
>  drivers/bus/mhi/host/pci_generic.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
> index caa4ce28cf9e..7dcd0ef3184a 100644
> --- a/drivers/bus/mhi/host/pci_generic.c
> +++ b/drivers/bus/mhi/host/pci_generic.c
> @@ -542,6 +542,8 @@ static const struct mhi_pci_dev_info mhi_telit_fn990_info = {
>  static const struct pci_device_id mhi_pci_id_table[] = {
>  	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304),
>  		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info },
> +	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, PCI_VENDOR_ID_QCOM, 0x010c),
> +		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
>  	/* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */
>  	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200),
>  		.driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info },
> -- 
> 2.37.3
> 
>
diff mbox series

Patch

diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index caa4ce28cf9e..7dcd0ef3184a 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -542,6 +542,8 @@  static const struct mhi_pci_dev_info mhi_telit_fn990_info = {
 static const struct pci_device_id mhi_pci_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304),
 		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, PCI_VENDOR_ID_QCOM, 0x010c),
+		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
 	/* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200),
 		.driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info },