diff mbox series

[v4] arm64: dts: ti: k3-am625: Enable Type-C port for USB0

Message ID 20230523123348.52850-1-rogerq@kernel.org
State New
Headers
Series [v4] arm64: dts: ti: k3-am625: Enable Type-C port for USB0 |

Commit Message

Roger Quadros May 23, 2023, 12:33 p.m. UTC 
  USB0 is a Type-C port with dual data role and power sink.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
---

Changelog:
v4:
- Rebase on v6.4-rc2
- Drop interrupt patch as it will break Type-C role switch on older boards.

v3:
- include Type-C support for am62-lp-sk
- split interrupts properties for Type-C chip into am625-sk

v2:
- rebase off [1]
- add fixes tag to patch 1

[1] - https://lore.kernel.org/all/20230321-am62-lp-sk-v2-0-0a56e1694804@ti.com/

 arch/arm64/boot/dts/ti/k3-am625-sk.dts        |  2 +-
 .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 35 ++++++++++++++++++-
 2 files changed, 35 insertions(+), 2 deletions(-)

Comments

Vignesh Raghavendra June 15, 2023, 8:49 a.m. UTC | #1 
Hi Roger Quadros,

On Tue, 23 May 2023 15:33:48 +0300, Roger Quadros wrote:
> USB0 is a Type-C port with dual data role and power sink.
> 
> 

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/1] arm64: dts: ti: k3-am625: Enable Type-C port for USB0
      commit: 2c213d19515caf880e6c8266fbeda4145894c10e

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
--
Vignesh
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index 2a1adda9bff6..729f95e19042 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -161,7 +161,7 @@  exp1: gpio@22 {
 				   "UART1_FET_BUF_EN", "WL_LT_EN",
 				   "GPIO_HDMI_RSTn", "CSI_GPIO1",
 				   "CSI_GPIO2", "PRU_3V3_EN",
-				   "HDMI_INTn", "TEST_GPIO2",
+				   "HDMI_INTn", "PD_I2C_IRQ",
 				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
 				   "MCASP1_FET_SEL", "UART1_FET_SEL",
 				   "TSINT#", "IO_EXP_TEST_LED";
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 976f8303c84f..b6667c0ff826 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -242,6 +242,30 @@  &main_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
+
+	typec_pd0: tps6598x@3f {
+		compatible = "ti,tps6598x";
+		reg = <0x3f>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			self-powered;
+			data-role = "dual";
+			power-role = "sink";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usb_con_hs: endpoint {
+						remote-endpoint = <&usb0_hs_ep>;
+					};
+				};
+			};
+		};
+	};
 };
 
 &main_i2c1 {
@@ -321,7 +345,16 @@  &usbss1 {
 };
 
 &usb0 {
-	dr_mode = "peripheral";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	usb-role-switch;
+
+	port@0 {
+		reg = <0>;
+		usb0_hs_ep: endpoint {
+		    remote-endpoint = <&usb_con_hs>;
+	       };
+	};
 };
 
 &usb1 {