diff mbox series

[10/21] ARM: at91: Kconfig: add config flag for SAM9X7 SoC

Message ID 20230603200243.243878-11-varshini.rajendran@microchip.com
State New
Headers
Series Add support for sam9x7 SoC family |

Commit Message

Varshini Rajendran June 3, 2023, 8:02 p.m. UTC 
  Add config flag for sam9x7 SoC

Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
---
 arch/arm/mach-at91/Kconfig | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)

Comments

Claudiu Beznea June 15, 2023, 7:46 a.m. UTC | #1 
On 03.06.2023 23:02, Varshini Rajendran wrote:
> Add config flag for sam9x7 SoC
> 
> Signed-off-by: Varshini Rajendran <varshini.rajendran@microchip.com>
> ---
>  arch/arm/mach-at91/Kconfig | 21 +++++++++++++++++++--
>  1 file changed, 19 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 3dd9e718661b..4463afd7298a 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -143,11 +143,28 @@ config SOC_SAM9X60
>  	help
>  	  Select this if you are using Microchip's SAM9X60 SoC
>  
> +config SOC_SAM9X7
> +	bool "SAM9X7"
> +	depends on ARCH_MULTI_V5
> +	select ATMEL_AIC5_IRQ
> +	select ATMEL_PM if PM
> +	select ATMEL_SDRAMC
> +	select CPU_ARM926T
> +	select HAVE_AT91_USB_CLK
> +	select HAVE_AT91_GENERATED_CLK
> +	select HAVE_AT91_SAM9X60_PLL
> +	select MEMORY
> +	select PINCTRL_AT91
> +	select SOC_SAM_V4_V5
> +	select SRAM if PM
> +	help
> +	  Select this if you are using Microchip's SAM9X7 SoC
> +
>  comment "Clocksource driver selection"
>  
>  config ATMEL_CLOCKSOURCE_PIT
>  	bool "Periodic Interval Timer (PIT) support"
> -	depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
> +	depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5
>  	default SOC_AT91SAM9 || SOC_SAMA5
>  	select ATMEL_PIT
>  	help
> @@ -157,7 +174,7 @@ config ATMEL_CLOCKSOURCE_PIT
>  
>  config ATMEL_CLOCKSOURCE_TCB
>  	bool "Timer Counter Blocks (TCB) support"
> -	default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
> +	default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5

You should also take into account PIT64B available in this file after TCB.

>  	select ATMEL_TCB_CLKSRC
>  	help
>  	  Select this to get a high precision clocksource based on a
diff mbox series

Patch

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 3dd9e718661b..4463afd7298a 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -143,11 +143,28 @@  config SOC_SAM9X60
 	help
 	  Select this if you are using Microchip's SAM9X60 SoC
 
+config SOC_SAM9X7
+	bool "SAM9X7"
+	depends on ARCH_MULTI_V5
+	select ATMEL_AIC5_IRQ
+	select ATMEL_PM if PM
+	select ATMEL_SDRAMC
+	select CPU_ARM926T
+	select HAVE_AT91_USB_CLK
+	select HAVE_AT91_GENERATED_CLK
+	select HAVE_AT91_SAM9X60_PLL
+	select MEMORY
+	select PINCTRL_AT91
+	select SOC_SAM_V4_V5
+	select SRAM if PM
+	help
+	  Select this if you are using Microchip's SAM9X7 SoC
+
 comment "Clocksource driver selection"
 
 config ATMEL_CLOCKSOURCE_PIT
 	bool "Periodic Interval Timer (PIT) support"
-	depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
+	depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5
 	default SOC_AT91SAM9 || SOC_SAMA5
 	select ATMEL_PIT
 	help
@@ -157,7 +174,7 @@  config ATMEL_CLOCKSOURCE_PIT
 
 config ATMEL_CLOCKSOURCE_TCB
 	bool "Timer Counter Blocks (TCB) support"
-	default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
+	default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5
 	select ATMEL_TCB_CLKSRC
 	help
 	  Select this to get a high precision clocksource based on a