dt-bindings: extcon: wlf,arizona: drop unneeded quotes
Commit Message
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/extcon/wlf,arizona.yaml | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
Comments
On 23. 6. 9. 23:07, Krzysztof Kozlowski wrote:
> Cleanup bindings dropping unneeded quotes. Once all these are fixed,
> checking for this can be enabled in yamllint.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
> .../devicetree/bindings/extcon/wlf,arizona.yaml | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
> index efdf59abb2e1..351b202d0e10 100644
> --- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
> +++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
> @@ -23,7 +23,7 @@ properties:
> headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it
> to HPDETR. If this node is not included or if the value is unknown,
> then headphone detection mode is set to HPDETL.
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> minimum: 1
> maximum: 2
>
> @@ -51,7 +51,7 @@ properties:
> description:
> Additional software microphone detection debounce specified in
> milliseconds.
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
>
> wlf,micd-pol-gpio:
> description:
> @@ -63,7 +63,7 @@ properties:
> description:
> Time allowed for MICBIAS to startup prior to performing microphone
> detection, specified as per the ARIZONA_MICD_TIME_XXX defines.
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> minimum: 0
> maximum: 12
>
> @@ -71,7 +71,7 @@ properties:
> description:
> Delay between successive microphone detection measurements, specified
> as per the ARIZONA_MICD_TIME_XXX defines.
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> minimum: 0
> maximum: 12
>
> @@ -79,7 +79,7 @@ properties:
> description:
> Microphone detection hardware debounces specified as the number of
> measurements to take.
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> enum: [2, 4]
>
> wlf,micd-timeout-ms:
> @@ -97,7 +97,7 @@ properties:
> CTIA / OMTP headsets), the field can be of variable length but
> should always be a multiple of 3 cells long, each three cell group
> represents one polarity configuration.
> - $ref: "/schemas/types.yaml#/definitions/uint32-matrix"
> + $ref: /schemas/types.yaml#/definitions/uint32-matrix
> items:
> items:
> - description:
> @@ -119,7 +119,7 @@ properties:
> description:
> Settings for the general purpose switch, set as one of the
> ARIZONA_GPSW_XXX defines.
> - $ref: "/schemas/types.yaml#/definitions/uint32"
> + $ref: /schemas/types.yaml#/definitions/uint32
> minimum: 0
> maximum: 3
>
Applied it.Thanks.
@@ -23,7 +23,7 @@ properties:
headphone detect mode to HPDETL, ARIZONA_ACCDET_MODE_HPR/2 sets it
to HPDETR. If this node is not included or if the value is unknown,
then headphone detection mode is set to HPDETL.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 1
maximum: 2
@@ -51,7 +51,7 @@ properties:
description:
Additional software microphone detection debounce specified in
milliseconds.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
wlf,micd-pol-gpio:
description:
@@ -63,7 +63,7 @@ properties:
description:
Time allowed for MICBIAS to startup prior to performing microphone
detection, specified as per the ARIZONA_MICD_TIME_XXX defines.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 12
@@ -71,7 +71,7 @@ properties:
description:
Delay between successive microphone detection measurements, specified
as per the ARIZONA_MICD_TIME_XXX defines.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 12
@@ -79,7 +79,7 @@ properties:
description:
Microphone detection hardware debounces specified as the number of
measurements to take.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
enum: [2, 4]
wlf,micd-timeout-ms:
@@ -97,7 +97,7 @@ properties:
CTIA / OMTP headsets), the field can be of variable length but
should always be a multiple of 3 cells long, each three cell group
represents one polarity configuration.
- $ref: "/schemas/types.yaml#/definitions/uint32-matrix"
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
items:
items:
- description:
@@ -119,7 +119,7 @@ properties:
description:
Settings for the general purpose switch, set as one of the
ARIZONA_GPSW_XXX defines.
- $ref: "/schemas/types.yaml#/definitions/uint32"
+ $ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 3