diff mbox series

[v14,3/5] arm64: dts: qcom: ipq9574: Add USB related nodes

Message ID 2f91eb879daaf9955dc56135d60a4be5e191a44d.1686217906.git.quic_varada@quicinc.com
State New
Headers
Series Enable IPQ9754 USB |

Commit Message

Varadarajan Narayanan June 8, 2023, 10:03 a.m. UTC 
  Add USB phy and controller related nodes

SS PHY need two supplies and HS PHY needs three supplies. 0.925V
and 3.3V are from fixed regulators and 1.8V is generated from
PMIC's LDO

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 Changes in v13:
	- Move fixed regulator definitions from SoC dtsi to board dts
	- Remove 'dr_mode' from SoC dtsi
	- Move 'status' property to the end
 Changes in v12:
	- Rebase
 Changes in v11:
	- Rename dwc_0 -> usb_0_dwc3
 Changes in v10:
	- Fix regulator definitions
 Changes in v8:
	- Change clocks order to match the bindings
 Changes in v7:
	- Change com_aux -> cfg_ahb
 Changes in v6:
	- Introduce fixed regulators for the phy
	- Resolved all 'make dtbs_check' messages

 Changes in v5:
	- Fix additional comments
	- Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml
	- 'make dtbs_check' giving the following messages since
	  ipq9574 doesn't have power domains. Hope this is ok

		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property
        	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property
        	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml

 Changes in v4:
	- Use newer bindings without subnodes
	- Fix coding style issues

 Changes in v3:
	- Insert the nodes at proper location

 Changes in v2:
	- Fixed issues flagged by Krzysztof
	- Fix issues reported by make dtbs_check
	- Remove NOC related clocks (to be added with proper
	  interconnect support)
---
 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 18 ++++++
 arch/arm64/boot/dts/qcom/ipq9574.dtsi       | 85 +++++++++++++++++++++++++++++
 2 files changed, 103 insertions(+)

Comments

Dmitry Baryshkov June 8, 2023, 11:06 a.m. UTC | #1 
On 08/06/2023 13:03, Varadarajan Narayanan wrote:
> Add USB phy and controller related nodes
> 
> SS PHY need two supplies and HS PHY needs three supplies. 0.925V
> and 3.3V are from fixed regulators and 1.8V is generated from
> PMIC's LDO
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
>   Changes in v13:
> 	- Move fixed regulator definitions from SoC dtsi to board dts
> 	- Remove 'dr_mode' from SoC dtsi
> 	- Move 'status' property to the end
>   Changes in v12:
> 	- Rebase
>   Changes in v11:
> 	- Rename dwc_0 -> usb_0_dwc3
>   Changes in v10:
> 	- Fix regulator definitions
>   Changes in v8:
> 	- Change clocks order to match the bindings
>   Changes in v7:
> 	- Change com_aux -> cfg_ahb
>   Changes in v6:
> 	- Introduce fixed regulators for the phy
> 	- Resolved all 'make dtbs_check' messages
> 
>   Changes in v5:
> 	- Fix additional comments
> 	- Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> 	- 'make dtbs_check' giving the following messages since
> 	  ipq9574 doesn't have power domains. Hope this is ok
> 
> 		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property
>          	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> 		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property
>          	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> 
>   Changes in v4:
> 	- Use newer bindings without subnodes
> 	- Fix coding style issues
> 
>   Changes in v3:
> 	- Insert the nodes at proper location
> 
>   Changes in v2:
> 	- Fixed issues flagged by Krzysztof
> 	- Fix issues reported by make dtbs_check
> 	- Remove NOC related clocks (to be added with proper
> 	  interconnect support)
> ---
>   arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 18 ++++++
>   arch/arm64/boot/dts/qcom/ipq9574.dtsi       | 85 +++++++++++++++++++++++++++++
>   2 files changed, 103 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> index 2b3ed8d..8261a2b 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> @@ -21,6 +21,24 @@
>   	chosen {
>   		stdout-path = "serial0:115200n8";
>   	};
> +
> +	regulator_fixed_3p3: s3300 {
> +		compatible = "regulator-fixed";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +		regulator-name = "fixed_3p3";
> +	};
> +
> +	regulator_fixed_0p925: s0925 {
> +		compatible = "regulator-fixed";
> +		regulator-min-microvolt = <925000>;
> +		regulator-max-microvolt = <925000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +		regulator-name = "fixed_0p925";
> +	};
>   };

Let me repeat from v13, so that it is not lost (please excuse me for the 
spam):

Nit: these two regulators are not references from SoC dtsi. So they 
don't have to be a part of this commit and can be moved to one of the 
next commits (I'd prefer the last one).

>   
>   &blsp1_uart2 {
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index 0baeb10..feabc19 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -465,6 +465,91 @@
>   			status = "disabled";
>   		};
>   
> +		usb_0_qusbphy: phy@7b000 {
> +			compatible = "qcom,ipq9574-qusb2-phy";
> +			reg = <0x0007b000 0x180>;
> +			#phy-cells = <0>;
> +
> +			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> +				 <&xo_board_clk>;
> +			clock-names = "cfg_ahb",
> +				      "ref";
> +
> +			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> +			status = "disabled";
> +		};
> +
> +		usb_0_qmpphy: phy@7d000 {
> +			compatible = "qcom,ipq9574-qmp-usb3-phy";
> +			reg = <0x0007d000 0xa00>;
> +			#phy-cells = <0>;
> +
> +			clocks = <&gcc GCC_USB0_AUX_CLK>,
> +				 <&xo_board_clk>,
> +				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> +				 <&gcc GCC_USB0_PIPE_CLK>;
> +			clock-names = "aux",
> +				      "ref",
> +				      "cfg_ahb",
> +				      "pipe";
> +
> +			resets = <&gcc GCC_USB0_PHY_BCR>,
> +				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
> +			reset-names = "phy",
> +				      "phy_phy";
> +
> +			#clock-cells = <0>;
> +			clock-output-names = "usb0_pipe_clk";
> +
> +			status = "disabled";
> +		};
> +
> +		usb3: usb@8af8800 {
> +			compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
> +			reg = <0x08af8800 0x400>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +
> +			clocks = <&gcc GCC_SNOC_USB_CLK>,
> +				 <&gcc GCC_USB0_MASTER_CLK>,
> +				 <&gcc GCC_ANOC_USB_AXI_CLK>,
> +				 <&gcc GCC_USB0_SLEEP_CLK>,
> +				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> +
> +			clock-names = "cfg_noc",
> +				      "core",
> +				      "iface",
> +				      "sleep",
> +				      "mock_utmi";
> +
> +			assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
> +					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> +			assigned-clock-rates = <200000000>,
> +					       <24000000>;
> +
> +			interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "pwr_event";
> +
> +			resets = <&gcc GCC_USB_BCR>;
> +			status = "disabled";
> +
> +			usb_0_dwc3: usb@8a00000 {
> +				compatible = "snps,dwc3";
> +				reg = <0x8a00000 0xcd00>;
> +				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> +				clock-names = "ref";
> +				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> +				phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>;
> +				phy-names = "usb2-phy", "usb3-phy";
> +				tx-fifo-resize;
> +				snps,is-utmi-l1-suspend;
> +				snps,hird-threshold = /bits/ 8 <0x0>;
> +				snps,dis_u2_susphy_quirk;
> +				snps,dis_u3_susphy_quirk;
> +			};
> +		};
> +
>   		intc: interrupt-controller@b000000 {
>   			compatible = "qcom,msm-qgic2";
>   			reg = <0x0b000000 0x1000>,  /* GICD */
Varadarajan Narayanan June 9, 2023, 6:02 a.m. UTC | #2 
On Thu, Jun 08, 2023 at 02:06:49PM +0300, Dmitry Baryshkov wrote:
> On 08/06/2023 13:03, Varadarajan Narayanan wrote:
> >Add USB phy and controller related nodes
> >
> >SS PHY need two supplies and HS PHY needs three supplies. 0.925V
> >and 3.3V are from fixed regulators and 1.8V is generated from
> >PMIC's LDO
> >
> >Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> >Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> >---
> >  Changes in v13:
> >	- Move fixed regulator definitions from SoC dtsi to board dts
> >	- Remove 'dr_mode' from SoC dtsi
> >	- Move 'status' property to the end
> >  Changes in v12:
> >	- Rebase
> >  Changes in v11:
> >	- Rename dwc_0 -> usb_0_dwc3
> >  Changes in v10:
> >	- Fix regulator definitions
> >  Changes in v8:
> >	- Change clocks order to match the bindings
> >  Changes in v7:
> >	- Change com_aux -> cfg_ahb
> >  Changes in v6:
> >	- Introduce fixed regulators for the phy
> >	- Resolved all 'make dtbs_check' messages
> >
> >  Changes in v5:
> >	- Fix additional comments
> >	- Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> >	- 'make dtbs_check' giving the following messages since
> >	  ipq9574 doesn't have power domains. Hope this is ok
> >
> >		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property
> >         	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> >		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property
> >         	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> >
> >  Changes in v4:
> >	- Use newer bindings without subnodes
> >	- Fix coding style issues
> >
> >  Changes in v3:
> >	- Insert the nodes at proper location
> >
> >  Changes in v2:
> >	- Fixed issues flagged by Krzysztof
> >	- Fix issues reported by make dtbs_check
> >	- Remove NOC related clocks (to be added with proper
> >	  interconnect support)
> >---
> >  arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 18 ++++++
> >  arch/arm64/boot/dts/qcom/ipq9574.dtsi       | 85 +++++++++++++++++++++++++++++
> >  2 files changed, 103 insertions(+)
> >
> >diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> >index 2b3ed8d..8261a2b 100644
> >--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> >+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> >@@ -21,6 +21,24 @@
> >  	chosen {
> >  		stdout-path = "serial0:115200n8";
> >  	};
> >+
> >+	regulator_fixed_3p3: s3300 {
> >+		compatible = "regulator-fixed";
> >+		regulator-min-microvolt = <3300000>;
> >+		regulator-max-microvolt = <3300000>;
> >+		regulator-boot-on;
> >+		regulator-always-on;
> >+		regulator-name = "fixed_3p3";
> >+	};
> >+
> >+	regulator_fixed_0p925: s0925 {
> >+		compatible = "regulator-fixed";
> >+		regulator-min-microvolt = <925000>;
> >+		regulator-max-microvolt = <925000>;
> >+		regulator-boot-on;
> >+		regulator-always-on;
> >+		regulator-name = "fixed_0p925";
> >+	};
> >  };
>
> Let me repeat from v13, so that it is not lost (please excuse me for the
> spam):
>
> Nit: these two regulators are not references from SoC dtsi. So they don't
> have to be a part of this commit and can be moved to one of the next commits
> (I'd prefer the last one).

Sure. Have posted v15 with the suggested changes.
Please review.

Thanks
Varada

>
> >  &blsp1_uart2 {
> >diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> >index 0baeb10..feabc19 100644
> >--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> >+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> >@@ -465,6 +465,91 @@
> >  			status = "disabled";
> >  		};
> >+		usb_0_qusbphy: phy@7b000 {
> >+			compatible = "qcom,ipq9574-qusb2-phy";
> >+			reg = <0x0007b000 0x180>;
> >+			#phy-cells = <0>;
> >+
> >+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> >+				 <&xo_board_clk>;
> >+			clock-names = "cfg_ahb",
> >+				      "ref";
> >+
> >+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> >+			status = "disabled";
> >+		};
> >+
> >+		usb_0_qmpphy: phy@7d000 {
> >+			compatible = "qcom,ipq9574-qmp-usb3-phy";
> >+			reg = <0x0007d000 0xa00>;
> >+			#phy-cells = <0>;
> >+
> >+			clocks = <&gcc GCC_USB0_AUX_CLK>,
> >+				 <&xo_board_clk>,
> >+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> >+				 <&gcc GCC_USB0_PIPE_CLK>;
> >+			clock-names = "aux",
> >+				      "ref",
> >+				      "cfg_ahb",
> >+				      "pipe";
> >+
> >+			resets = <&gcc GCC_USB0_PHY_BCR>,
> >+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
> >+			reset-names = "phy",
> >+				      "phy_phy";
> >+
> >+			#clock-cells = <0>;
> >+			clock-output-names = "usb0_pipe_clk";
> >+
> >+			status = "disabled";
> >+		};
> >+
> >+		usb3: usb@8af8800 {
> >+			compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
> >+			reg = <0x08af8800 0x400>;
> >+			#address-cells = <1>;
> >+			#size-cells = <1>;
> >+			ranges;
> >+
> >+			clocks = <&gcc GCC_SNOC_USB_CLK>,
> >+				 <&gcc GCC_USB0_MASTER_CLK>,
> >+				 <&gcc GCC_ANOC_USB_AXI_CLK>,
> >+				 <&gcc GCC_USB0_SLEEP_CLK>,
> >+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> >+
> >+			clock-names = "cfg_noc",
> >+				      "core",
> >+				      "iface",
> >+				      "sleep",
> >+				      "mock_utmi";
> >+
> >+			assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
> >+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> >+			assigned-clock-rates = <200000000>,
> >+					       <24000000>;
> >+
> >+			interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
> >+			interrupt-names = "pwr_event";
> >+
> >+			resets = <&gcc GCC_USB_BCR>;
> >+			status = "disabled";
> >+
> >+			usb_0_dwc3: usb@8a00000 {
> >+				compatible = "snps,dwc3";
> >+				reg = <0x8a00000 0xcd00>;
> >+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
> >+				clock-names = "ref";
> >+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> >+				phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>;
> >+				phy-names = "usb2-phy", "usb3-phy";
> >+				tx-fifo-resize;
> >+				snps,is-utmi-l1-suspend;
> >+				snps,hird-threshold = /bits/ 8 <0x0>;
> >+				snps,dis_u2_susphy_quirk;
> >+				snps,dis_u3_susphy_quirk;
> >+			};
> >+		};
> >+
> >  		intc: interrupt-controller@b000000 {
> >  			compatible = "qcom,msm-qgic2";
> >  			reg = <0x0b000000 0x1000>,  /* GICD */
>
> --
> With best wishes
> Dmitry
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index 2b3ed8d..8261a2b 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -21,6 +21,24 @@ 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	regulator_fixed_3p3: s3300 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_3p3";
+	};
+
+	regulator_fixed_0p925: s0925 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <925000>;
+		regulator-max-microvolt = <925000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_0p925";
+	};
 };
 
 &blsp1_uart2 {
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 0baeb10..feabc19 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -465,6 +465,91 @@ 
 			status = "disabled";
 		};
 
+		usb_0_qusbphy: phy@7b000 {
+			compatible = "qcom,ipq9574-qusb2-phy";
+			reg = <0x0007b000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&xo_board_clk>;
+			clock-names = "cfg_ahb",
+				      "ref";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+			status = "disabled";
+		};
+
+		usb_0_qmpphy: phy@7d000 {
+			compatible = "qcom,ipq9574-qmp-usb3-phy";
+			reg = <0x0007d000 0xa00>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				 <&xo_board_clk>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			resets = <&gcc GCC_USB0_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb0_pipe_clk";
+
+			status = "disabled";
+		};
+
+		usb3: usb@8af8800 {
+			compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SNOC_USB_CLK>,
+				 <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_ANOC_USB_AXI_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <200000000>,
+					       <24000000>;
+
+			interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event";
+
+			resets = <&gcc GCC_USB_BCR>;
+			status = "disabled";
+
+			usb_0_dwc3: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8a00000 0xcd00>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>,  /* GICD */