[v2,1/3] arm64: dts: qcom: msm8916-alcatel-idol347: Add GPIOs -state suffix
Commit Message
Add -state suffix to GPIOs states node names as required by dt-bindings.
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
---
.../boot/dts/qcom/msm8916-alcatel-idol347.dts | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
Comments
On 04/11/2022 09:23, Vincent Knecht wrote:
> Add -state suffix to GPIOs states node names as required by dt-bindings.
>
> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
> ---
> .../boot/dts/qcom/msm8916-alcatel-idol347.dts | 14 +++++++-------
This was fixed:
https://lore.kernel.org/all/20221024002356.28261-2-krzysztof.kozlowski@linaro.org/
Best regards,
Krzysztof
On 04/11/2022 14:23, Vincent Knecht wrote:
> Add -state suffix to GPIOs states node names as required by dt-bindings.
>
> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
> ---
Reviewed-by Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
> .../boot/dts/qcom/msm8916-alcatel-idol347.dts | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
> index 3dc9619fde6e..668f8ff53229 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts
> @@ -260,7 +260,7 @@ l18 {
> };
>
> &msmgpio {
> - accel_int_default: accel-int-default {
> + accel_int_default: accel-int-default-state {
> pins = "gpio31";
> function = "gpio";
>
> @@ -268,7 +268,7 @@ accel_int_default: accel-int-default {
> bias-disable;
> };
>
> - gpio_keys_default: gpio-keys-default {
> + gpio_keys_default: gpio-keys-default-state {
> pins = "gpio107";
> function = "gpio";
>
> @@ -276,7 +276,7 @@ gpio_keys_default: gpio-keys-default {
> bias-pull-up;
> };
>
> - gyro_int_default: gyro-int-default {
> + gyro_int_default: gyro-int-default-state {
> pins = "gpio97", "gpio98";
> function = "gpio";
>
> @@ -284,7 +284,7 @@ gyro_int_default: gyro-int-default {
> bias-disable;
> };
>
> - mag_reset_default: mag-reset-default {
> + mag_reset_default: mag-reset-default-state {
> pins = "gpio8";
> function = "gpio";
>
> @@ -292,7 +292,7 @@ mag_reset_default: mag-reset-default {
> bias-disable;
> };
>
> - proximity_int_default: proximity-int-default {
> + proximity_int_default: proximity-int-default-state {
> pins = "gpio12";
> function = "gpio";
>
> @@ -300,7 +300,7 @@ proximity_int_default: proximity-int-default {
> bias-pull-up;
> };
>
> - ts_int_reset_default: ts-int-reset-default {
> + ts_int_reset_default: ts-int-reset-default-state {
> pins = "gpio13", "gpio100";
> function = "gpio";
>
> @@ -308,7 +308,7 @@ ts_int_reset_default: ts-int-reset-default {
> bias-disable;
> };
>
> - usb_id_default: usb-id-default {
> + usb_id_default: usb-id-default-state {
> pins = "gpio69";
> function = "gpio";
>
@@ -260,7 +260,7 @@ l18 {
};
&msmgpio {
- accel_int_default: accel-int-default {
+ accel_int_default: accel-int-default-state {
pins = "gpio31";
function = "gpio";
@@ -268,7 +268,7 @@ accel_int_default: accel-int-default {
bias-disable;
};
- gpio_keys_default: gpio-keys-default {
+ gpio_keys_default: gpio-keys-default-state {
pins = "gpio107";
function = "gpio";
@@ -276,7 +276,7 @@ gpio_keys_default: gpio-keys-default {
bias-pull-up;
};
- gyro_int_default: gyro-int-default {
+ gyro_int_default: gyro-int-default-state {
pins = "gpio97", "gpio98";
function = "gpio";
@@ -284,7 +284,7 @@ gyro_int_default: gyro-int-default {
bias-disable;
};
- mag_reset_default: mag-reset-default {
+ mag_reset_default: mag-reset-default-state {
pins = "gpio8";
function = "gpio";
@@ -292,7 +292,7 @@ mag_reset_default: mag-reset-default {
bias-disable;
};
- proximity_int_default: proximity-int-default {
+ proximity_int_default: proximity-int-default-state {
pins = "gpio12";
function = "gpio";
@@ -300,7 +300,7 @@ proximity_int_default: proximity-int-default {
bias-pull-up;
};
- ts_int_reset_default: ts-int-reset-default {
+ ts_int_reset_default: ts-int-reset-default-state {
pins = "gpio13", "gpio100";
function = "gpio";
@@ -308,7 +308,7 @@ ts_int_reset_default: ts-int-reset-default {
bias-disable;
};
- usb_id_default: usb-id-default {
+ usb_id_default: usb-id-default-state {
pins = "gpio69";
function = "gpio";