diff mbox series

[v8,26/33] x86/fred: allow single-step trap and NMI when starting a new thread

Message ID 20230410081438.1750-27-xin3.li@intel.com
State New
Headers
Series x86: enable FRED for x86-64 |

Commit Message

Li, Xin3 April 10, 2023, 8:14 a.m. UTC 
  From: "H. Peter Anvin (Intel)" <hpa@zytor.com>

Allow single-step trap and NMI when starting a new thread, thus once
the new thread returns to ring3, single-step trap and NMI are both
enabled immediately.

High-order 48 bits above the lowest 16 bit CS are discarded by the
legacy IRET instruction, thus can be set unconditionally, even when
FRED is not enabled.

Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Tested-by: Shan Kang <shan.kang@intel.com>
Signed-off-by: Xin Li <xin3.li@intel.com>
---
 arch/x86/include/asm/fred.h  | 11 +++++++++++
 arch/x86/kernel/process_64.c | 13 +++++++------
 2 files changed, 18 insertions(+), 6 deletions(-)

Comments

Thomas Gleixner June 5, 2023, 1:50 p.m. UTC | #1 
On Mon, Apr 10 2023 at 01:14, Xin Li wrote:
> Allow single-step trap and NMI when starting a new thread, thus once
> the new thread returns to ring3, single-step trap and NMI are both
> enabled immediately.
>
> High-order 48 bits above the lowest 16 bit CS are discarded by the
> legacy IRET instruction, thus can be set unconditionally, even when
> FRED is not enabled.

I assume this has been validated to be true on _all_ CPU incarnations of
_all_ x86 vendors.

If so, then please document it. If not, then go back to the drawing
board.

Thanks,

        tglx
Thomas Gleixner June 5, 2023, 1:52 p.m. UTC | #2 
On Mon, Jun 05 2023 at 15:50, Thomas Gleixner wrote:

> On Mon, Apr 10 2023 at 01:14, Xin Li wrote:
>> Allow single-step trap and NMI when starting a new thread, thus once
>> the new thread returns to ring3, single-step trap and NMI are both
>> enabled immediately.
>>
>> High-order 48 bits above the lowest 16 bit CS are discarded by the
>> legacy IRET instruction, thus can be set unconditionally, even when
>> FRED is not enabled.
>
> I assume this has been validated to be true on _all_ CPU incarnations of
> _all_ x86 vendors.

It's also ensured that VMMs do not get confused by this, right?

> If so, then please document it. If not, then go back to the drawing
> board.
>
> Thanks,
>
>         tglx
diff mbox series

Patch

diff --git a/arch/x86/include/asm/fred.h b/arch/x86/include/asm/fred.h
index c5fbc4f18059..f7caf3b2f3f7 100644
--- a/arch/x86/include/asm/fred.h
+++ b/arch/x86/include/asm/fred.h
@@ -70,6 +70,14 @@ 
  */
 #define FRED_DF_STACK_LEVEL		3
 
+/*
+ * High-order 48 bits above the lowest 16 bit CS are discarded by the
+ * legacy IRET instruction, thus can be set unconditionally, even when
+ * FRED is not enabled.
+ */
+#define CSX_PROCESS_START \
+	(FRED_CSX_ENABLE_NMI | FRED_CSX_ALLOW_SINGLE_STEP)
+
 #ifndef __ASSEMBLY__
 
 #include <linux/kernel.h>
@@ -133,6 +141,9 @@  void fred_setup_apic(void);
 #else
 #define cpu_init_fred_exceptions() BUG()
 #define fred_setup_apic() BUG()
+
+#define CSX_PROCESS_START 0
+
 #endif /* CONFIG_X86_FRED */
 
 #endif /* ASM_X86_FRED_H */
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 2bea86073646..c732d9dbff3a 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -55,6 +55,7 @@ 
 #include <asm/resctrl.h>
 #include <asm/unistd.h>
 #include <asm/fsgsbase.h>
+#include <asm/fred.h>
 #ifdef CONFIG_IA32_EMULATION
 /* Not included via unistd.h */
 #include <asm/unistd_32_ia32.h>
@@ -506,7 +507,7 @@  void x86_gsbase_write_task(struct task_struct *task, unsigned long gsbase)
 static void
 start_thread_common(struct pt_regs *regs, unsigned long new_ip,
 		    unsigned long new_sp,
-		    unsigned int _cs, unsigned int _ss, unsigned int _ds)
+		    u16 _cs, u16 _ss, u16 _ds)
 {
 	WARN_ON_ONCE(regs != current_pt_regs());
 
@@ -521,11 +522,11 @@  start_thread_common(struct pt_regs *regs, unsigned long new_ip,
 	loadsegment(ds, _ds);
 	load_gs_index(0);
 
-	regs->ip		= new_ip;
-	regs->sp		= new_sp;
-	regs->cs		= _cs;
-	regs->ss		= _ss;
-	regs->flags		= X86_EFLAGS_IF;
+	regs->ip	= new_ip;
+	regs->sp	= new_sp;
+	regs->csx	= _cs | CSX_PROCESS_START;
+	regs->ssx	= _ss;
+	regs->flags	= X86_EFLAGS_IF | X86_EFLAGS_FIXED;
 }
 
 void