diff mbox series

[14/20] interconnect: qcom: msm8939: Hook up RPM bus clk definitions

Message ID 20230526-topic-smd_icc-v1-14-1bf8e6663c4e@linaro.org
State New
Headers
Series Restructure RPM SMD ICC |

Commit Message

Konrad Dybcio May 30, 2023, 10:20 a.m. UTC 
  Assign the necessary definitions to migrate to the new bus clock
handling mechanism.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 drivers/interconnect/qcom/msm8939.c | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Dmitry Baryshkov June 1, 2023, 10:09 a.m. UTC | #1 
On 30/05/2023 13:20, Konrad Dybcio wrote:
> Assign the necessary definitions to migrate to the new bus clock
> handling mechanism.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   drivers/interconnect/qcom/msm8939.c | 4 ++++
>   1 file changed, 4 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/drivers/interconnect/qcom/msm8939.c b/drivers/interconnect/qcom/msm8939.c
index 639566dce45a..94b11b590a8e 100644
--- a/drivers/interconnect/qcom/msm8939.c
+++ b/drivers/interconnect/qcom/msm8939.c
@@ -1284,6 +1284,7 @@  static const struct qcom_icc_desc msm8939_snoc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = msm8939_snoc_nodes,
 	.num_nodes = ARRAY_SIZE(msm8939_snoc_nodes),
+	.bus_clk_desc = &bus_1_clk,
 	.regmap_cfg = &msm8939_snoc_regmap_config,
 	.qos_offset = 0x7000,
 };
@@ -1304,6 +1305,7 @@  static const struct qcom_icc_desc msm8939_snoc_mm = {
 	.type = QCOM_ICC_NOC,
 	.nodes = msm8939_snoc_mm_nodes,
 	.num_nodes = ARRAY_SIZE(msm8939_snoc_mm_nodes),
+	.bus_clk_desc = &bus_2_clk,
 	.regmap_cfg = &msm8939_snoc_regmap_config,
 	.qos_offset = 0x7000,
 };
@@ -1332,6 +1334,7 @@  static const struct qcom_icc_desc msm8939_bimc = {
 	.type = QCOM_ICC_BIMC,
 	.nodes = msm8939_bimc_nodes,
 	.num_nodes = ARRAY_SIZE(msm8939_bimc_nodes),
+	.bus_clk_desc = &bimc_clk,
 	.regmap_cfg = &msm8939_bimc_regmap_config,
 	.qos_offset = 0x8000,
 };
@@ -1403,6 +1406,7 @@  static const struct qcom_icc_desc msm8939_pcnoc = {
 	.type = QCOM_ICC_NOC,
 	.nodes = msm8939_pcnoc_nodes,
 	.num_nodes = ARRAY_SIZE(msm8939_pcnoc_nodes),
+	.bus_clk_desc = &bus_0_clk,
 	.regmap_cfg = &msm8939_pcnoc_regmap_config,
 	.qos_offset = 0x7000,
 };