diff mbox series

[net,v5] tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent

Message ID 20221104022723.1066429-1-luwei32@huawei.com
State New
Headers
Series [net,v5] tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent |

Commit Message

Lu Wei Nov. 4, 2022, 2:27 a.m. UTC 
  If setsockopt with option name of TCP_REPAIR_OPTIONS and opt_code
of TCPOPT_SACK_PERM is called to enable sack after data is sent
and dupacks are received , it will trigger a warning in function
tcp_verify_left_out() as follows:

============================================
WARNING: CPU: 8 PID: 0 at net/ipv4/tcp_input.c:2132
tcp_timeout_mark_lost+0x154/0x160
tcp_enter_loss+0x2b/0x290
tcp_retransmit_timer+0x50b/0x640
tcp_write_timer_handler+0x1c8/0x340
tcp_write_timer+0xe5/0x140
call_timer_fn+0x3a/0x1b0
__run_timers.part.0+0x1bf/0x2d0
run_timer_softirq+0x43/0xb0
__do_softirq+0xfd/0x373
__irq_exit_rcu+0xf6/0x140

The warning is caused in the following steps:
1. a socket named socketA is created
2. socketA enters repair mode without build a connection
3. socketA calls connect() and its state is changed to TCP_ESTABLISHED
   directly
4. socketA leaves repair mode
5. socketA calls sendmsg() to send data, packets_out and sack_outs(dup
   ack receives) increase
6. socketA enters repair mode again
7. socketA calls setsockopt with TCPOPT_SACK_PERM to enable sack
8. retransmit timer expires, it calls tcp_timeout_mark_lost(), lost_out
   increases
9. sack_outs + lost_out > packets_out triggers since lost_out and
   sack_outs increase repeatly

In function tcp_timeout_mark_lost(), tp->sacked_out will be cleared if
Step7 not happen and the warning will not be triggered. As suggested by
Denis and Eric, TCP_REPAIR_OPTIONS should be prohibited if data was
already sent.

socket-tcp tests in CRIU has been tested as follows:
$ sudo ./test/zdtm.py run -t zdtm/static/socket-tcp*  --keep-going \
       --ignore-taint

socket-tcp* represent all socket-tcp tests in test/zdtm/static/.

Fixes: b139ba4e90dc ("tcp: Repair connection-time negotiated parameters")
Signed-off-by: Lu Wei <luwei32@huawei.com>
---
v5: modify the commit message
 net/ipv4/tcp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Eric Dumazet Nov. 4, 2022, 1:24 a.m. UTC | #1 
On Thu, Nov 3, 2022 at 6:22 PM Lu Wei <luwei32@huawei.com> wrote:
>
> If setsockopt with option name of TCP_REPAIR_OPTIONS and opt_code
> of TCPOPT_SACK_PERM is called to enable sack after data is sent
> and dupacks are received , it will trigger a warning in function
> tcp_verify_left_out() as follows:
>

> In function tcp_timeout_mark_lost(), tp->sacked_out will be cleared if
> Step7 not happen and the warning will not be triggered. As suggested by
> Denis and Eric, TCP_REPAIR_OPTIONS should be prohibited if data was
> already sent.
>
> socket-tcp tests in CRIU has been tested as follows:
> $ sudo ./test/zdtm.py run -t zdtm/static/socket-tcp*  --keep-going \
>        --ignore-taint
>
> socket-tcp* represent all socket-tcp tests in test/zdtm/static/.
>
> Fixes: b139ba4e90dc ("tcp: Repair connection-time negotiated parameters")
> Signed-off-by: Lu Wei <luwei32@huawei.com>
> ---
> v5: modify the commit message
>  net/ipv4/tcp.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
> index ef14efa1fb70..54836a6b81d6 100644
> --- a/net/ipv4/tcp.c
> +++ b/net/ipv4/tcp.c
> @@ -3647,7 +3647,7 @@ int do_tcp_setsockopt(struct sock *sk, int level, int optname,
>         case TCP_REPAIR_OPTIONS:
>                 if (!tp->repair)
>                         err = -EINVAL;
> -               else if (sk->sk_state == TCP_ESTABLISHED)
> +               else if (sk->sk_state == TCP_ESTABLISHED && !tp->bytes_sent)
>                         err = tcp_repair_options_est(sk, optval, optlen);
>                 else
>                         err = -EPERM;
> --
> 2.31.1
>

SGTM, thanks.

Reviewed-by: Eric Dumazet <edumazet@google.com>
patchwork-bot+netdevbpf@kernel.org Nov. 7, 2022, 11:40 a.m. UTC | #2 
Hello:

This patch was applied to netdev/net.git (master)
by David S. Miller <davem@davemloft.net>:

On Fri, 4 Nov 2022 10:27:23 +0800 you wrote:
> If setsockopt with option name of TCP_REPAIR_OPTIONS and opt_code
> of TCPOPT_SACK_PERM is called to enable sack after data is sent
> and dupacks are received , it will trigger a warning in function
> tcp_verify_left_out() as follows:
> 
> ============================================
> WARNING: CPU: 8 PID: 0 at net/ipv4/tcp_input.c:2132
> tcp_timeout_mark_lost+0x154/0x160
> tcp_enter_loss+0x2b/0x290
> tcp_retransmit_timer+0x50b/0x640
> tcp_write_timer_handler+0x1c8/0x340
> tcp_write_timer+0xe5/0x140
> call_timer_fn+0x3a/0x1b0
> __run_timers.part.0+0x1bf/0x2d0
> run_timer_softirq+0x43/0xb0
> __do_softirq+0xfd/0x373
> __irq_exit_rcu+0xf6/0x140
> 
> [...]

Here is the summary with links:
  - [net,v5] tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent
    https://git.kernel.org/netdev/net/c/0c175da7b037

You are awesome, thank you!
diff mbox series

Patch

diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index ef14efa1fb70..54836a6b81d6 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -3647,7 +3647,7 @@  int do_tcp_setsockopt(struct sock *sk, int level, int optname,
 	case TCP_REPAIR_OPTIONS:
 		if (!tp->repair)
 			err = -EINVAL;
-		else if (sk->sk_state == TCP_ESTABLISHED)
+		else if (sk->sk_state == TCP_ESTABLISHED && !tp->bytes_sent)
 			err = tcp_repair_options_est(sk, optval, optlen);
 		else
 			err = -EPERM;