diff mbox series

[v1,3/5] ACPI: thermal: Move symbol definitions to one place

Message ID 2224091.iZASKD2KPV@kreacher
State New
Headers
Series ACPI: thermal: Assorted cleanups |

Commit Message

Rafael J. Wysocki May 30, 2023, 3:44 p.m. UTC 
  From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Move all of the symbol definitions to the initial part of the code so
they all can be found in one place.

While at it, consolidate white space used in there.

No functional impact.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---
 drivers/acpi/thermal.c |   58 ++++++++++++++++++++++++-------------------------
 1 file changed, 29 insertions(+), 29 deletions(-)

Comments

Wilczynski, Michal May 31, 2023, 7:58 a.m. UTC | #1 
On 5/30/2023 5:44 PM, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> Move all of the symbol definitions to the initial part of the code so
> they all can be found in one place.
>
> While at it, consolidate white space used in there.
>
> No functional impact.
>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
>  drivers/acpi/thermal.c |   58 ++++++++++++++++++++++++-------------------------
>  1 file changed, 29 insertions(+), 29 deletions(-)
>
> Index: linux-pm/drivers/acpi/thermal.c
> ===================================================================
> --- linux-pm.orig/drivers/acpi/thermal.c
> +++ linux-pm/drivers/acpi/thermal.c
> @@ -40,8 +40,35 @@
>  #define ACPI_THERMAL_NOTIFY_HOT		0xF1
>  #define ACPI_THERMAL_MODE_ACTIVE	0x00
>  
> -#define ACPI_THERMAL_MAX_ACTIVE	10
> -#define ACPI_THERMAL_MAX_LIMIT_STR_LEN 65
> +#define ACPI_THERMAL_MAX_ACTIVE		10
> +#define ACPI_THERMAL_MAX_LIMIT_STR_LEN	65
> +
> +#define ACPI_TRIPS_CRITICAL	BIT(0)
> +#define ACPI_TRIPS_HOT		BIT(1)
> +#define ACPI_TRIPS_PASSIVE	BIT(2)
> +#define ACPI_TRIPS_ACTIVE	BIT(3)
> +#define ACPI_TRIPS_DEVICES	BIT(4)
> +
> +#define ACPI_TRIPS_THRESHOLDS	(ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE)
> +
> +#define ACPI_TRIPS_INIT		(ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT | \
> +				 ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE | \
> +				 ACPI_TRIPS_DEVICES)
> +
> +/*
> + * This exception is thrown out in two cases:
> + * 1.An invalid trip point becomes invalid or a valid trip point becomes invalid
> + *   when re-evaluating the AML code.
> + * 2.TODO: Devices listed in _PSL, _ALx, _TZD may change.
> + *   We need to re-bind the cooling devices of a thermal zone when this occurs.
> + */
> +#define ACPI_THERMAL_TRIPS_EXCEPTION(flags, tz, str) \
> +do { \
> +	if (flags != ACPI_TRIPS_INIT) \
> +		acpi_handle_info(tz->device->handle, \
> +			"ACPI thermal trip point %s changed\n" \
> +			"Please report to linux-acpi@vger.kernel.org\n", str); \
> +} while (0)
>  
>  MODULE_AUTHOR("Paul Diefenbaugh");
>  MODULE_DESCRIPTION("ACPI Thermal Zone Driver");
> @@ -232,33 +259,6 @@ static int acpi_thermal_set_cooling_mode
>  	return 0;
>  }
>  
> -#define ACPI_TRIPS_CRITICAL	BIT(0)
> -#define ACPI_TRIPS_HOT		BIT(1)
> -#define ACPI_TRIPS_PASSIVE	BIT(2)
> -#define ACPI_TRIPS_ACTIVE	BIT(3)
> -#define ACPI_TRIPS_DEVICES	BIT(4)
> -
> -#define ACPI_TRIPS_THRESHOLDS	(ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE)
> -
> -#define ACPI_TRIPS_INIT		(ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT | \
> -				 ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE | \
> -				 ACPI_TRIPS_DEVICES)
> -
> -/*
> - * This exception is thrown out in two cases:
> - * 1.An invalid trip point becomes invalid or a valid trip point becomes invalid
> - *   when re-evaluating the AML code.
> - * 2.TODO: Devices listed in _PSL, _ALx, _TZD may change.
> - *   We need to re-bind the cooling devices of a thermal zone when this occurs.
> - */
> -#define ACPI_THERMAL_TRIPS_EXCEPTION(flags, tz, str)	\
> -do {	\
> -	if (flags != ACPI_TRIPS_INIT)	\
> -		acpi_handle_info(tz->device->handle,	\
> -		"ACPI thermal trip point %s changed\n"	\
> -		"Please report to linux-acpi@vger.kernel.org\n", str); \
> -} while (0)
> -
>  static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
>  {
>  	acpi_status status;

Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com>

>
>
diff mbox series

Patch

Index: linux-pm/drivers/acpi/thermal.c
===================================================================
--- linux-pm.orig/drivers/acpi/thermal.c
+++ linux-pm/drivers/acpi/thermal.c
@@ -40,8 +40,35 @@ 
 #define ACPI_THERMAL_NOTIFY_HOT		0xF1
 #define ACPI_THERMAL_MODE_ACTIVE	0x00
 
-#define ACPI_THERMAL_MAX_ACTIVE	10
-#define ACPI_THERMAL_MAX_LIMIT_STR_LEN 65
+#define ACPI_THERMAL_MAX_ACTIVE		10
+#define ACPI_THERMAL_MAX_LIMIT_STR_LEN	65
+
+#define ACPI_TRIPS_CRITICAL	BIT(0)
+#define ACPI_TRIPS_HOT		BIT(1)
+#define ACPI_TRIPS_PASSIVE	BIT(2)
+#define ACPI_TRIPS_ACTIVE	BIT(3)
+#define ACPI_TRIPS_DEVICES	BIT(4)
+
+#define ACPI_TRIPS_THRESHOLDS	(ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE)
+
+#define ACPI_TRIPS_INIT		(ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT | \
+				 ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE | \
+				 ACPI_TRIPS_DEVICES)
+
+/*
+ * This exception is thrown out in two cases:
+ * 1.An invalid trip point becomes invalid or a valid trip point becomes invalid
+ *   when re-evaluating the AML code.
+ * 2.TODO: Devices listed in _PSL, _ALx, _TZD may change.
+ *   We need to re-bind the cooling devices of a thermal zone when this occurs.
+ */
+#define ACPI_THERMAL_TRIPS_EXCEPTION(flags, tz, str) \
+do { \
+	if (flags != ACPI_TRIPS_INIT) \
+		acpi_handle_info(tz->device->handle, \
+			"ACPI thermal trip point %s changed\n" \
+			"Please report to linux-acpi@vger.kernel.org\n", str); \
+} while (0)
 
 MODULE_AUTHOR("Paul Diefenbaugh");
 MODULE_DESCRIPTION("ACPI Thermal Zone Driver");
@@ -232,33 +259,6 @@  static int acpi_thermal_set_cooling_mode
 	return 0;
 }
 
-#define ACPI_TRIPS_CRITICAL	BIT(0)
-#define ACPI_TRIPS_HOT		BIT(1)
-#define ACPI_TRIPS_PASSIVE	BIT(2)
-#define ACPI_TRIPS_ACTIVE	BIT(3)
-#define ACPI_TRIPS_DEVICES	BIT(4)
-
-#define ACPI_TRIPS_THRESHOLDS	(ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE)
-
-#define ACPI_TRIPS_INIT		(ACPI_TRIPS_CRITICAL | ACPI_TRIPS_HOT | \
-				 ACPI_TRIPS_PASSIVE | ACPI_TRIPS_ACTIVE | \
-				 ACPI_TRIPS_DEVICES)
-
-/*
- * This exception is thrown out in two cases:
- * 1.An invalid trip point becomes invalid or a valid trip point becomes invalid
- *   when re-evaluating the AML code.
- * 2.TODO: Devices listed in _PSL, _ALx, _TZD may change.
- *   We need to re-bind the cooling devices of a thermal zone when this occurs.
- */
-#define ACPI_THERMAL_TRIPS_EXCEPTION(flags, tz, str)	\
-do {	\
-	if (flags != ACPI_TRIPS_INIT)	\
-		acpi_handle_info(tz->device->handle,	\
-		"ACPI thermal trip point %s changed\n"	\
-		"Please report to linux-acpi@vger.kernel.org\n", str); \
-} while (0)
-
 static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag)
 {
 	acpi_status status;