[1/3] STABS: remove -gstabs and -gxcoff functionality
Commit Message
Patch can bootstrap on x86_64-linux-gnu and survives regression tests.
I've also built all cross compilers.
Ready to be installed?
Thanks,
Martin
gcc/ChangeLog:
* Makefile.in: Remove -gstabs option support, DBX-related
macros and DBX debugging info support.
* collect2.cc (scan_prog_file): Likewise.
* common.opt: Likewise.
* config.gcc: Likewise.
* config.in: Likewise.
* config/aarch64/aarch64-elf.h (DBX_DEBUGGING_INFO): Likewise.
* config/alpha/alpha.cc: Likewise.
* config/alpha/elf.h (ASM_SPEC): Likewise.
* config/arc/arc.h (DBX_DEBUGGING_INFO): Likewise.
(DBX_CONTIN_LENGTH): Likewise.
* config/arm/aout.h (DBX_DEBUGGING_INFO): Likewise.
(DBX_CONTIN_LENGTH): Likewise.
* config/arm/netbsd-elf.h (DBX_CONTIN_LENGTH): Likewise.
* config/darwin.h (DSYMUTIL_SPEC): Likewise.
(ASM_DEBUG_SPEC): Likewise.
(DBX_DEBUGGING_INFO): Likewise.
(DBX_USE_BINCL): Likewise.
(DBX_CONTIN_LENGTH): Likewise.
(DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END): Likewise.
* config/epiphany/epiphany.h (DBX_DEBUGGING_INFO): Likewise.
(DBX_CONTIN_LENGTH): Likewise.
* config/i386/bsd.h (DBX_NO_XREFS): Likewise.
(DBX_CONTIN_LENGTH): Likewise.
* config/i386/gas.h (DBX_NO_XREFS): Likewise.
(DBX_CONTIN_LENGTH): Likewise.
* config/ia64/ia64.h: Likewise.
* config/ia64/sysv4.h (DBX_DEBUGGING_INFO): Likewise.
* config/m68k/linux.h (DBX_CONTIN_LENGTH): Likewise.
* config/m68k/openbsd.h (DBX_DEBUGGING_INFO): Likewise.
(DBX_CONTIN_LENGTH): Likewise.
(DBX_CONTIN_CHAR): Likewise.
* config/mips/mips.cc (mips_output_filename): Likewise.
(mips_option_override): Likewise.
* config/mips/mips.h (SUBTARGET_ASM_DEBUGGING_SPEC): Likewise.
(DBX_DEBUGGING_INFO): Likewise.
(DBX_CONTIN_LENGTH): Likewise.
(DBX_REGISTER_NUMBER): Likewise.
(GP_DBX_FIRST): Likewise.
(FP_DBX_FIRST): Likewise.
(MD_DBX_FIRST): Likewise.
* config/nvptx/nvptx.cc: Likewise.
* config/openbsd.h (DBX_NO_XREFS): Likewise.
* config/pa/pa-64.h (DBX_DEBUGGING_INFO): Likewise.
* config/pa/pa.h (ASSEMBLER_DIALECT): Likewise.
(DBX_CONTIN_LENGTH): Likewise.
* config/pa/som.h (PREFERRED_DEBUGGING_TYPE): Likewise.
(DBX_USE_BINCL): Likewise.
(DBX_LINES_FUNCTION_RELATIVE): Likewise.
(DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END): Likewise.
* config/pdp11/pdp11.cc: Likewise.
* config/pdp11/pdp11.h (DBX_DEBUGGING_INFO): Likewise.
(PREFERRED_DEBUGGING_TYPE): Likewise.
(DBX_CONTIN_LENGTH): Likewise.
* config/rs6000/rs6000-builtin.cc: Likewise.
* config/rs6000/rs6000-call.cc: Likewise.
* config/rs6000/rs6000-logue.cc (defined): Likewise.
* config/rs6000/rs6000.cc (rs6000_option_override_internal): Likewise.
(HAVE_XCOFF_DWARF_EXTRAS): Likewise.
(rs6000_xcoff_declare_function_name): Likewise.
* config/rs6000/sysv4.h (DBX_DEBUGGING_INFO): Likewise.
(DBX_FUNCTION_FIRST): Likewise.
* config/rs6000/xcoff.h (XCOFF_DEBUGGING_INFO): Likewise.
* config/rx/rx.h (DBX_DEBUGGING_INFO): Likewise.
* config/sh/elf.h (DBX_LINES_FUNCTION_RELATIVE): Likewise.
(DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END): Likewise.
* config/sol2.h (NO_DBX_BNSYM_ENSYM): Likewise.
* config/sparc/freebsd.h (DBX_CONTIN_CHAR): Likewise.
* config/sparc/netbsd-elf.h (DBX_CONTIN_CHAR): Likewise.
* config/sparc/sparc.h (DBX_CONTIN_LENGTH): Likewise.
* config/vax/vax.cc (vax_file_start): Likewise.
* config/vax/vax.h (DBX_DEBUGGING_INFO): Likewise.
(DBX_CONTIN_LENGTH): Likewise.
(DBX_CONTIN_CHAR): Likewise.
(DBX_NO_XREFS): Likewise.
(DBX_STATIC_STAB_DATA_SECTION): Likewise.
* config/vx-common.h (DBX_DEBUGGING_INFO): Likewise.
(XCOFF_DEBUGGING_INFO): Likewise.
* configure: Regenerate. Likewise.
* configure.ac: Likewise.
* debug.h: Likewise.
* doc/install.texi: Likewise.
* doc/invoke.texi: Likewise.
* doc/passes.texi: Likewise.
* doc/tm.texi: Likewise.
* doc/tm.texi.in: Likewise.
* dwarf2asm.cc (XCOFF_DEBUGGING_INFO): Likewise.
(dw2_asm_output_nstring): Likewise.
(USE_LINKONCE_INDIRECT): Likewise.
* dwarf2out.cc (XCOFF_DEBUGGING_INFO): Likewise.
(HAVE_XCOFF_DWARF_EXTRAS): Likewise.
(output_fde): Likewise.
(output_call_frame_info): Likewise.
(have_macinfo): Likewise.
(add_AT_loc_list): Likewise.
(add_AT_view_list): Likewise.
(output_compilation_unit_header): Likewise.
(output_pubnames): Likewise.
(output_aranges): Likewise.
(output_line_info): Likewise.
(output_macinfo): Likewise.
(dwarf2out_finish): Likewise.
(dwarf2out_early_finish): Likewise.
* final.cc (final_scan_insn_1): Likewise.
(rest_of_handle_final): Likewise.
* flag-types.h (enum debug_info_type): Likewise.
(DBX_DEBUG): Likewise.
(XCOFF_DEBUG): Likewise.
* function.cc (defined): Likewise.
* gcc.cc (defined): Likewise.
(ASM_DEBUG_SPEC): Likewise.
(ASM_DEBUG_OPTION_SPEC): Likewise.
* opts.cc (common_handle_option): Likewise.
(set_debug_level): Likewise.
* system.h (fancy_abort): Likewise.
* target-def.h (TARGET_ASM_CONSTRUCTOR): Likewise.
(TARGET_ASM_DESTRUCTOR): Likewise.
* toplev.cc (defined): Likewise.
* varasm.cc: Likewise.
* config/dbxcoff.h: Removed.
* config/dbxelf.h: Removed.
* dbxout.cc: Removed.
* dbxout.h: Removed.
* gstab.h: Removed.
* stab.def: Removed.
* xcoffout.cc: Removed.
* xcoffout.h: Removed.
gcc/go/ChangeLog:
* go-lang.cc (go_langhook_pushdecl): Remove -gstabs option support, DBX-related
macros and DBX debugging info support.
* gospec.cc (lang_specific_driver): Likewise.
gcc/testsuite/ChangeLog:
* lib/gcc-dg.exp: Remove -gstabs option support, DBX-related
macros and DBX debugging info support.
* lib/gfortran-dg.exp: Likewise.
* lib/target-supports.exp: Likewise.
* g++.dg/cpp0x/alias-decl-debug-0.C: Removed.
* g++.dg/other/PR23205.C: Removed.
* g++.dg/other/pr23205-2.C: Removed.
* gcc.dg/20040813-1.c: Removed.
* gcc.dg/darwin-20040809-2.c: Removed.
* gcc.dg/debug/pr35154.c: Removed.
* gcc.dg/pr69471-2.c: Removed.
* gcc.target/powerpc/stabs-attrib-vect-darwin.c: Removed.
* gcc.target/s390/20041216-1.c: Removed.
* gfortran.dg/debug/pr35154-stabs.f: Removed.
* objc.dg/stabs-1.m: Removed.
---
gcc/Makefile.in | 4 +-
gcc/collect2.cc | 7 -
gcc/common.opt | 26 +-
gcc/config.gcc | 232 +-
gcc/config.in | 19 -
gcc/config/aarch64/aarch64-elf.h | 3 -
gcc/config/alpha/alpha.cc | 4 -
gcc/config/alpha/elf.h | 2 +-
gcc/config/arc/arc.h | 10 +-
gcc/config/arm/aout.h | 9 -
gcc/config/arm/netbsd-elf.h | 3 -
gcc/config/darwin.h | 27 +-
gcc/config/dbxcoff.h | 56 -
gcc/config/dbxelf.h | 68 -
gcc/config/epiphany/epiphany.h | 7 +-
gcc/config/i386/bsd.h | 6 -
gcc/config/i386/gas.h | 4 -
gcc/config/ia64/ia64.h | 2 -
gcc/config/ia64/sysv4.h | 3 -
gcc/config/m68k/linux.h | 4 -
gcc/config/m68k/openbsd.h | 12 -
gcc/config/mips/mips.cc | 16 -
gcc/config/mips/mips.h | 17 +-
gcc/config/nvptx/nvptx.cc | 1 -
gcc/config/openbsd.h | 11 -
gcc/config/pa/pa-64.h | 4 -
gcc/config/pa/pa.h | 10 -
gcc/config/pa/som.h | 15 -
gcc/config/pdp11/pdp11.cc | 1 -
gcc/config/pdp11/pdp11.h | 9 -
gcc/config/rs6000/rs6000-builtin.cc | 3 -
gcc/config/rs6000/rs6000-call.cc | 8 -
gcc/config/rs6000/rs6000-logue.cc | 12 -
gcc/config/rs6000/rs6000.cc | 24 +-
gcc/config/rs6000/sysv4.h | 8 -
gcc/config/rs6000/xcoff.h | 3 -
gcc/config/rx/rx.h | 1 -
gcc/config/sh/elf.h | 3 -
gcc/config/sol2.h | 4 -
gcc/config/sparc/freebsd.h | 6 -
gcc/config/sparc/netbsd-elf.h | 5 -
gcc/config/sparc/sparc.h | 8 -
gcc/config/vax/vax.cc | 3 -
gcc/config/vax/vax.h | 21 -
gcc/config/vx-common.h | 2 -
gcc/configure | 99 -
gcc/configure.ac | 20 -
gcc/dbxout.cc | 3936 -----------------
gcc/dbxout.h | 60 -
gcc/debug.h | 1 -
gcc/doc/install.texi | 3 +-
gcc/doc/invoke.texi | 42 +-
gcc/doc/passes.texi | 2 +-
gcc/doc/tm.texi | 220 +-
gcc/doc/tm.texi.in | 220 +-
gcc/dwarf2asm.cc | 13 +-
gcc/dwarf2out.cc | 103 +-
gcc/final.cc | 44 -
gcc/flag-types.h | 18 +-
gcc/function.cc | 8 -
gcc/gcc.cc | 24 +-
gcc/go/go-lang.cc | 3 +-
gcc/go/gospec.cc | 4 -
gcc/gstab.h | 35 -
gcc/opts.cc | 18 +-
gcc/stab.def | 239 -
gcc/system.h | 14 +-
gcc/target-def.h | 4 -
.../g++.dg/cpp0x/alias-decl-debug-0.C | 12 -
gcc/testsuite/g++.dg/other/PR23205.C | 17 -
gcc/testsuite/g++.dg/other/pr23205-2.C | 17 -
gcc/testsuite/gcc.dg/20040813-1.c | 14 -
gcc/testsuite/gcc.dg/darwin-20040809-2.c | 15 -
gcc/testsuite/gcc.dg/debug/pr35154.c | 35 -
gcc/testsuite/gcc.dg/pr69471-2.c | 8 -
.../powerpc/stabs-attrib-vect-darwin.c | 12 -
gcc/testsuite/gcc.target/s390/20041216-1.c | 23 -
.../gfortran.dg/debug/pr35154-stabs.f | 35 -
gcc/testsuite/lib/gcc-dg.exp | 2 +-
gcc/testsuite/lib/gfortran-dg.exp | 2 +-
gcc/testsuite/lib/target-supports.exp | 9 -
gcc/testsuite/objc.dg/stabs-1.m | 19 -
gcc/toplev.cc | 21 -
gcc/varasm.cc | 4 -
gcc/xcoffout.cc | 494 ---
gcc/xcoffout.h | 194 -
86 files changed, 211 insertions(+), 6555 deletions(-)
delete mode 100644 gcc/config/dbxcoff.h
delete mode 100644 gcc/config/dbxelf.h
delete mode 100644 gcc/dbxout.cc
delete mode 100644 gcc/dbxout.h
delete mode 100644 gcc/gstab.h
delete mode 100644 gcc/stab.def
delete mode 100644 gcc/testsuite/g++.dg/cpp0x/alias-decl-debug-0.C
delete mode 100644 gcc/testsuite/g++.dg/other/PR23205.C
delete mode 100644 gcc/testsuite/g++.dg/other/pr23205-2.C
delete mode 100644 gcc/testsuite/gcc.dg/20040813-1.c
delete mode 100644 gcc/testsuite/gcc.dg/darwin-20040809-2.c
delete mode 100644 gcc/testsuite/gcc.dg/debug/pr35154.c
delete mode 100644 gcc/testsuite/gcc.dg/pr69471-2.c
delete mode 100644 gcc/testsuite/gcc.target/powerpc/stabs-attrib-vect-darwin.c
delete mode 100644 gcc/testsuite/gcc.target/s390/20041216-1.c
delete mode 100644 gcc/testsuite/gfortran.dg/debug/pr35154-stabs.f
delete mode 100644 gcc/testsuite/objc.dg/stabs-1.m
delete mode 100644 gcc/xcoffout.cc
delete mode 100644 gcc/xcoffout.h
Comments
On Thu, Sep 1, 2022 at 12:05 PM Martin Liška <mliska@suse.cz> wrote:
>
> Patch can bootstrap on x86_64-linux-gnu and survives regression tests.
>
> I've also built all cross compilers.
>
> Ready to be installed?
OK.
I presume WarnRemoved will diagnose use of -gstabs but not fail
compilation. Will -gstabs then still enable -g (with the default debug
format)?
Please followup with a gcc-13/changes.html entry.
I notice we have VMS_DEBUGGING_INFO left. From a quick look
it is used by alpha*-dec-* (exclusively) and ia64-hp-*vms* (maybe
also supports DWARF, it is ELF at least). One of the goals of
non-DWARF removal was to get rid of debug hooks and instead allow
"free-form" early debug generation from the frontends.
Thanks,
Richard.
> Thanks,
> Martin
>
> gcc/ChangeLog:
>
> * Makefile.in: Remove -gstabs option support, DBX-related
> macros and DBX debugging info support.
> * collect2.cc (scan_prog_file): Likewise.
> * common.opt: Likewise.
> * config.gcc: Likewise.
> * config.in: Likewise.
> * config/aarch64/aarch64-elf.h (DBX_DEBUGGING_INFO): Likewise.
> * config/alpha/alpha.cc: Likewise.
> * config/alpha/elf.h (ASM_SPEC): Likewise.
> * config/arc/arc.h (DBX_DEBUGGING_INFO): Likewise.
> (DBX_CONTIN_LENGTH): Likewise.
> * config/arm/aout.h (DBX_DEBUGGING_INFO): Likewise.
> (DBX_CONTIN_LENGTH): Likewise.
> * config/arm/netbsd-elf.h (DBX_CONTIN_LENGTH): Likewise.
> * config/darwin.h (DSYMUTIL_SPEC): Likewise.
> (ASM_DEBUG_SPEC): Likewise.
> (DBX_DEBUGGING_INFO): Likewise.
> (DBX_USE_BINCL): Likewise.
> (DBX_CONTIN_LENGTH): Likewise.
> (DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END): Likewise.
> * config/epiphany/epiphany.h (DBX_DEBUGGING_INFO): Likewise.
> (DBX_CONTIN_LENGTH): Likewise.
> * config/i386/bsd.h (DBX_NO_XREFS): Likewise.
> (DBX_CONTIN_LENGTH): Likewise.
> * config/i386/gas.h (DBX_NO_XREFS): Likewise.
> (DBX_CONTIN_LENGTH): Likewise.
> * config/ia64/ia64.h: Likewise.
> * config/ia64/sysv4.h (DBX_DEBUGGING_INFO): Likewise.
> * config/m68k/linux.h (DBX_CONTIN_LENGTH): Likewise.
> * config/m68k/openbsd.h (DBX_DEBUGGING_INFO): Likewise.
> (DBX_CONTIN_LENGTH): Likewise.
> (DBX_CONTIN_CHAR): Likewise.
> * config/mips/mips.cc (mips_output_filename): Likewise.
> (mips_option_override): Likewise.
> * config/mips/mips.h (SUBTARGET_ASM_DEBUGGING_SPEC): Likewise.
> (DBX_DEBUGGING_INFO): Likewise.
> (DBX_CONTIN_LENGTH): Likewise.
> (DBX_REGISTER_NUMBER): Likewise.
> (GP_DBX_FIRST): Likewise.
> (FP_DBX_FIRST): Likewise.
> (MD_DBX_FIRST): Likewise.
> * config/nvptx/nvptx.cc: Likewise.
> * config/openbsd.h (DBX_NO_XREFS): Likewise.
> * config/pa/pa-64.h (DBX_DEBUGGING_INFO): Likewise.
> * config/pa/pa.h (ASSEMBLER_DIALECT): Likewise.
> (DBX_CONTIN_LENGTH): Likewise.
> * config/pa/som.h (PREFERRED_DEBUGGING_TYPE): Likewise.
> (DBX_USE_BINCL): Likewise.
> (DBX_LINES_FUNCTION_RELATIVE): Likewise.
> (DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END): Likewise.
> * config/pdp11/pdp11.cc: Likewise.
> * config/pdp11/pdp11.h (DBX_DEBUGGING_INFO): Likewise.
> (PREFERRED_DEBUGGING_TYPE): Likewise.
> (DBX_CONTIN_LENGTH): Likewise.
> * config/rs6000/rs6000-builtin.cc: Likewise.
> * config/rs6000/rs6000-call.cc: Likewise.
> * config/rs6000/rs6000-logue.cc (defined): Likewise.
> * config/rs6000/rs6000.cc (rs6000_option_override_internal): Likewise.
> (HAVE_XCOFF_DWARF_EXTRAS): Likewise.
> (rs6000_xcoff_declare_function_name): Likewise.
> * config/rs6000/sysv4.h (DBX_DEBUGGING_INFO): Likewise.
> (DBX_FUNCTION_FIRST): Likewise.
> * config/rs6000/xcoff.h (XCOFF_DEBUGGING_INFO): Likewise.
> * config/rx/rx.h (DBX_DEBUGGING_INFO): Likewise.
> * config/sh/elf.h (DBX_LINES_FUNCTION_RELATIVE): Likewise.
> (DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END): Likewise.
> * config/sol2.h (NO_DBX_BNSYM_ENSYM): Likewise.
> * config/sparc/freebsd.h (DBX_CONTIN_CHAR): Likewise.
> * config/sparc/netbsd-elf.h (DBX_CONTIN_CHAR): Likewise.
> * config/sparc/sparc.h (DBX_CONTIN_LENGTH): Likewise.
> * config/vax/vax.cc (vax_file_start): Likewise.
> * config/vax/vax.h (DBX_DEBUGGING_INFO): Likewise.
> (DBX_CONTIN_LENGTH): Likewise.
> (DBX_CONTIN_CHAR): Likewise.
> (DBX_NO_XREFS): Likewise.
> (DBX_STATIC_STAB_DATA_SECTION): Likewise.
> * config/vx-common.h (DBX_DEBUGGING_INFO): Likewise.
> (XCOFF_DEBUGGING_INFO): Likewise.
> * configure: Regenerate. Likewise.
> * configure.ac: Likewise.
> * debug.h: Likewise.
> * doc/install.texi: Likewise.
> * doc/invoke.texi: Likewise.
> * doc/passes.texi: Likewise.
> * doc/tm.texi: Likewise.
> * doc/tm.texi.in: Likewise.
> * dwarf2asm.cc (XCOFF_DEBUGGING_INFO): Likewise.
> (dw2_asm_output_nstring): Likewise.
> (USE_LINKONCE_INDIRECT): Likewise.
> * dwarf2out.cc (XCOFF_DEBUGGING_INFO): Likewise.
> (HAVE_XCOFF_DWARF_EXTRAS): Likewise.
> (output_fde): Likewise.
> (output_call_frame_info): Likewise.
> (have_macinfo): Likewise.
> (add_AT_loc_list): Likewise.
> (add_AT_view_list): Likewise.
> (output_compilation_unit_header): Likewise.
> (output_pubnames): Likewise.
> (output_aranges): Likewise.
> (output_line_info): Likewise.
> (output_macinfo): Likewise.
> (dwarf2out_finish): Likewise.
> (dwarf2out_early_finish): Likewise.
> * final.cc (final_scan_insn_1): Likewise.
> (rest_of_handle_final): Likewise.
> * flag-types.h (enum debug_info_type): Likewise.
> (DBX_DEBUG): Likewise.
> (XCOFF_DEBUG): Likewise.
> * function.cc (defined): Likewise.
> * gcc.cc (defined): Likewise.
> (ASM_DEBUG_SPEC): Likewise.
> (ASM_DEBUG_OPTION_SPEC): Likewise.
> * opts.cc (common_handle_option): Likewise.
> (set_debug_level): Likewise.
> * system.h (fancy_abort): Likewise.
> * target-def.h (TARGET_ASM_CONSTRUCTOR): Likewise.
> (TARGET_ASM_DESTRUCTOR): Likewise.
> * toplev.cc (defined): Likewise.
> * varasm.cc: Likewise.
> * config/dbxcoff.h: Removed.
> * config/dbxelf.h: Removed.
> * dbxout.cc: Removed.
> * dbxout.h: Removed.
> * gstab.h: Removed.
> * stab.def: Removed.
> * xcoffout.cc: Removed.
> * xcoffout.h: Removed.
>
> gcc/go/ChangeLog:
>
> * go-lang.cc (go_langhook_pushdecl): Remove -gstabs option support, DBX-related
> macros and DBX debugging info support.
> * gospec.cc (lang_specific_driver): Likewise.
>
> gcc/testsuite/ChangeLog:
>
> * lib/gcc-dg.exp: Remove -gstabs option support, DBX-related
> macros and DBX debugging info support.
> * lib/gfortran-dg.exp: Likewise.
> * lib/target-supports.exp: Likewise.
> * g++.dg/cpp0x/alias-decl-debug-0.C: Removed.
> * g++.dg/other/PR23205.C: Removed.
> * g++.dg/other/pr23205-2.C: Removed.
> * gcc.dg/20040813-1.c: Removed.
> * gcc.dg/darwin-20040809-2.c: Removed.
> * gcc.dg/debug/pr35154.c: Removed.
> * gcc.dg/pr69471-2.c: Removed.
> * gcc.target/powerpc/stabs-attrib-vect-darwin.c: Removed.
> * gcc.target/s390/20041216-1.c: Removed.
> * gfortran.dg/debug/pr35154-stabs.f: Removed.
> * objc.dg/stabs-1.m: Removed.
> ---
> gcc/Makefile.in | 4 +-
> gcc/collect2.cc | 7 -
> gcc/common.opt | 26 +-
> gcc/config.gcc | 232 +-
> gcc/config.in | 19 -
> gcc/config/aarch64/aarch64-elf.h | 3 -
> gcc/config/alpha/alpha.cc | 4 -
> gcc/config/alpha/elf.h | 2 +-
> gcc/config/arc/arc.h | 10 +-
> gcc/config/arm/aout.h | 9 -
> gcc/config/arm/netbsd-elf.h | 3 -
> gcc/config/darwin.h | 27 +-
> gcc/config/dbxcoff.h | 56 -
> gcc/config/dbxelf.h | 68 -
> gcc/config/epiphany/epiphany.h | 7 +-
> gcc/config/i386/bsd.h | 6 -
> gcc/config/i386/gas.h | 4 -
> gcc/config/ia64/ia64.h | 2 -
> gcc/config/ia64/sysv4.h | 3 -
> gcc/config/m68k/linux.h | 4 -
> gcc/config/m68k/openbsd.h | 12 -
> gcc/config/mips/mips.cc | 16 -
> gcc/config/mips/mips.h | 17 +-
> gcc/config/nvptx/nvptx.cc | 1 -
> gcc/config/openbsd.h | 11 -
> gcc/config/pa/pa-64.h | 4 -
> gcc/config/pa/pa.h | 10 -
> gcc/config/pa/som.h | 15 -
> gcc/config/pdp11/pdp11.cc | 1 -
> gcc/config/pdp11/pdp11.h | 9 -
> gcc/config/rs6000/rs6000-builtin.cc | 3 -
> gcc/config/rs6000/rs6000-call.cc | 8 -
> gcc/config/rs6000/rs6000-logue.cc | 12 -
> gcc/config/rs6000/rs6000.cc | 24 +-
> gcc/config/rs6000/sysv4.h | 8 -
> gcc/config/rs6000/xcoff.h | 3 -
> gcc/config/rx/rx.h | 1 -
> gcc/config/sh/elf.h | 3 -
> gcc/config/sol2.h | 4 -
> gcc/config/sparc/freebsd.h | 6 -
> gcc/config/sparc/netbsd-elf.h | 5 -
> gcc/config/sparc/sparc.h | 8 -
> gcc/config/vax/vax.cc | 3 -
> gcc/config/vax/vax.h | 21 -
> gcc/config/vx-common.h | 2 -
> gcc/configure | 99 -
> gcc/configure.ac | 20 -
> gcc/dbxout.cc | 3936 -----------------
> gcc/dbxout.h | 60 -
> gcc/debug.h | 1 -
> gcc/doc/install.texi | 3 +-
> gcc/doc/invoke.texi | 42 +-
> gcc/doc/passes.texi | 2 +-
> gcc/doc/tm.texi | 220 +-
> gcc/doc/tm.texi.in | 220 +-
> gcc/dwarf2asm.cc | 13 +-
> gcc/dwarf2out.cc | 103 +-
> gcc/final.cc | 44 -
> gcc/flag-types.h | 18 +-
> gcc/function.cc | 8 -
> gcc/gcc.cc | 24 +-
> gcc/go/go-lang.cc | 3 +-
> gcc/go/gospec.cc | 4 -
> gcc/gstab.h | 35 -
> gcc/opts.cc | 18 +-
> gcc/stab.def | 239 -
> gcc/system.h | 14 +-
> gcc/target-def.h | 4 -
> .../g++.dg/cpp0x/alias-decl-debug-0.C | 12 -
> gcc/testsuite/g++.dg/other/PR23205.C | 17 -
> gcc/testsuite/g++.dg/other/pr23205-2.C | 17 -
> gcc/testsuite/gcc.dg/20040813-1.c | 14 -
> gcc/testsuite/gcc.dg/darwin-20040809-2.c | 15 -
> gcc/testsuite/gcc.dg/debug/pr35154.c | 35 -
> gcc/testsuite/gcc.dg/pr69471-2.c | 8 -
> .../powerpc/stabs-attrib-vect-darwin.c | 12 -
> gcc/testsuite/gcc.target/s390/20041216-1.c | 23 -
> .../gfortran.dg/debug/pr35154-stabs.f | 35 -
> gcc/testsuite/lib/gcc-dg.exp | 2 +-
> gcc/testsuite/lib/gfortran-dg.exp | 2 +-
> gcc/testsuite/lib/target-supports.exp | 9 -
> gcc/testsuite/objc.dg/stabs-1.m | 19 -
> gcc/toplev.cc | 21 -
> gcc/varasm.cc | 4 -
> gcc/xcoffout.cc | 494 ---
> gcc/xcoffout.h | 194 -
> 86 files changed, 211 insertions(+), 6555 deletions(-)
> delete mode 100644 gcc/config/dbxcoff.h
> delete mode 100644 gcc/config/dbxelf.h
> delete mode 100644 gcc/dbxout.cc
> delete mode 100644 gcc/dbxout.h
> delete mode 100644 gcc/gstab.h
> delete mode 100644 gcc/stab.def
> delete mode 100644 gcc/testsuite/g++.dg/cpp0x/alias-decl-debug-0.C
> delete mode 100644 gcc/testsuite/g++.dg/other/PR23205.C
> delete mode 100644 gcc/testsuite/g++.dg/other/pr23205-2.C
> delete mode 100644 gcc/testsuite/gcc.dg/20040813-1.c
> delete mode 100644 gcc/testsuite/gcc.dg/darwin-20040809-2.c
> delete mode 100644 gcc/testsuite/gcc.dg/debug/pr35154.c
> delete mode 100644 gcc/testsuite/gcc.dg/pr69471-2.c
> delete mode 100644 gcc/testsuite/gcc.target/powerpc/stabs-attrib-vect-darwin.c
> delete mode 100644 gcc/testsuite/gcc.target/s390/20041216-1.c
> delete mode 100644 gcc/testsuite/gfortran.dg/debug/pr35154-stabs.f
> delete mode 100644 gcc/testsuite/objc.dg/stabs-1.m
> delete mode 100644 gcc/xcoffout.cc
> delete mode 100644 gcc/xcoffout.h
>
> diff --git a/gcc/Makefile.in b/gcc/Makefile.in
> index 034f4677fe2..d3b66b7106e 100644
> --- a/gcc/Makefile.in
> +++ b/gcc/Makefile.in
> @@ -1353,7 +1353,6 @@ OBJS = \
> data-streamer.o \
> data-streamer-in.o \
> data-streamer-out.o \
> - dbxout.o \
> dbgcnt.o \
> dce.o \
> ddg.o \
> @@ -1727,7 +1726,6 @@ OBJS = \
> web.o \
> wide-int.o \
> wide-int-print.o \
> - xcoffout.o \
> $(out_object_file) \
> $(ANALYZER_OBJS) \
> $(EXTRA_OBJS) \
> @@ -2676,7 +2674,7 @@ GTFILES = $(CPPLIB_H) $(srcdir)/input.h $(srcdir)/coretypes.h \
> $(srcdir)/reload.h $(srcdir)/caller-save.cc $(srcdir)/symtab.cc \
> $(srcdir)/alias.cc $(srcdir)/bitmap.cc $(srcdir)/cselib.cc $(srcdir)/cgraph.cc \
> $(srcdir)/ipa-prop.cc $(srcdir)/ipa-cp.cc $(srcdir)/ipa-utils.h \
> - $(srcdir)/ipa-param-manipulation.h $(srcdir)/ipa-sra.cc $(srcdir)/dbxout.cc \
> + $(srcdir)/ipa-param-manipulation.h $(srcdir)/ipa-sra.cc \
> $(srcdir)/ipa-modref.h $(srcdir)/ipa-modref.cc \
> $(srcdir)/ipa-modref-tree.h \
> $(srcdir)/signop.h \
> diff --git a/gcc/collect2.cc b/gcc/collect2.cc
> index d81c7f28f16..9715e8eee30 100644
> --- a/gcc/collect2.cc
> +++ b/gcc/collect2.cc
> @@ -2784,13 +2784,6 @@ scan_prog_file (const char *prog_name, scanpass which_pass,
> if ((name = ldgetname (ldptr, &symbol)) == NULL)
> continue; /* Should never happen. */
>
> -#ifdef XCOFF_DEBUGGING_INFO
> - /* All AIX function names have a duplicate entry
> - beginning with a dot. */
> - if (*name == '.')
> - ++name;
> -#endif
> -
> switch (is_ctor_dtor (name))
> {
> #if TARGET_AIX_VERSION
> diff --git a/gcc/common.opt b/gcc/common.opt
> index fba90ff6dcb..06ef768ab78 100644
> --- a/gcc/common.opt
> +++ b/gcc/common.opt
> @@ -122,12 +122,6 @@ uint32_t write_symbols = NO_DEBUG
> Variable
> enum debug_info_levels debug_info_level = DINFO_LEVEL_NONE
>
> -; Nonzero means use GNU-only extensions in the generated symbolic
> -; debugging information. Currently, this only has an effect when
> -; write_symbols is set to DBX_DEBUG or XCOFF_DEBUG.
> -Variable
> -bool use_gnu_debug_info_extensions
> -
> ; Level of CTF debugging information we are producing. See flag-types.h
> ; for the definitions of the different possible levels.
> Variable
> @@ -3323,7 +3317,7 @@ Common Driver JoinedOrMissing Negative(gdwarf-)
> Generate debug information in default version of DWARF format.
>
> gdwarf-
> -Common Driver Joined UInteger Var(dwarf_version) Init(5) Negative(gstabs)
> +Common Driver Joined UInteger Var(dwarf_version) Init(5)
> Generate debug information in DWARF v2 (or later) format.
>
> gdwarf32
> @@ -3371,12 +3365,12 @@ Common Driver Var(dwarf_split_debug_info) Init(0)
> Generate debug information in separate .dwo files.
>
> gstabs
> -Common Driver JoinedOrMissing Negative(gstabs+)
> -Generate debug information in STABS format.
> +Common Driver WarnRemoved
> +Does nothing. Preserved for backward compatibility.
>
> gstabs+
> -Common Driver JoinedOrMissing Negative(gvms)
> -Generate debug information in extended STABS format.
> +Common Driver WarnRemoved
> +Does nothing. Preserved for backward compatibility.
>
> gstatement-frontiers
> Common Driver Var(debug_nonbind_markers_p) PerFunction
> @@ -3402,16 +3396,16 @@ gvariable-location-views=incompat5
> Common Driver RejectNegative Var(debug_variable_location_views, -1) Init(2)
>
> gvms
> -Common Driver JoinedOrMissing Negative(gxcoff)
> +Common Driver JoinedOrMissing
> Generate debug information in VMS format.
>
> gxcoff
> -Common Driver JoinedOrMissing Negative(gxcoff+)
> -Generate debug information in XCOFF format.
> +Common Driver WarnRemoved
> +Does nothing. Preserved for backward compatibility.
>
> gxcoff+
> -Common Driver JoinedOrMissing Negative(gdwarf)
> -Generate debug information in extended XCOFF format.
> +Common Driver JoinedOrMissing WarnRemoved
> +Does nothing. Preserved for backward compatibility.
>
> Enum
> Name(compressed_debug_sections) Type(int)
> diff --git a/gcc/config.gcc b/gcc/config.gcc
> index 75aacc3757a..f1391e26142 100644
> --- a/gcc/config.gcc
> +++ b/gcc/config.gcc
> @@ -72,10 +72,10 @@
> # tm_file A list of target macro files, if different from
> # "$cpu_type/$cpu_type.h". Usually it's constructed
> # per target in a way like this:
> -# tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type.h}/elf.h"
> +# tm_file="${tm_file} elfos.h ${cpu_type.h}/elf.h"
> # Note that the preferred order is:
> # - specific target header "${cpu_type}/${cpu_type.h}"
> -# - generic headers like dbxelf.h elfos.h, etc.
> +# - generic headers like elfos.h, etc.
> # - specializing target headers like ${cpu_type.h}/elf.h
> # This helps to keep OS specific stuff out of the CPU
> # defining header ${cpu_type}/${cpu_type.h}.
> @@ -956,7 +956,7 @@ case ${target} in
> *-*-solaris2*)
> # i?86-*-solaris2* needs to insert headers between cpu default and
> # Solaris 2 specific ones.
> - sol2_tm_file_head="dbxelf.h elfos.h ${cpu_type}/sysv4.h"
> + sol2_tm_file_head="elfos.h ${cpu_type}/sysv4.h"
> sol2_tm_file_tail="${cpu_type}/sol2.h sol2.h"
> sol2_tm_file="${sol2_tm_file_head} ${sol2_tm_file_tail}"
> case ${target} in
> @@ -1080,7 +1080,7 @@ esac
>
> case ${target} in
> aarch64*-*-elf | aarch64*-*-fuchsia* | aarch64*-*-rtems*)
> - tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h"
> + tm_file="${tm_file} elfos.h newlib-stdint.h"
> tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-elf-raw.h"
> tmake_file="${tmake_file} aarch64/t-aarch64"
> case $target in
> @@ -1117,19 +1117,19 @@ aarch64*-*-elf | aarch64*-*-fuchsia* | aarch64*-*-rtems*)
> TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
> ;;
> aarch64*-*-freebsd*)
> - tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file}"
> + tm_file="${tm_file} elfos.h ${fbsd_tm_file}"
> tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-freebsd.h"
> tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-freebsd"
> tm_defines="${tm_defines} TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1"
> ;;
> aarch64*-*-netbsd*)
> - tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file}"
> + tm_file="${tm_file} elfos.h ${nbsd_tm_file}"
> tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-netbsd.h"
> tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-netbsd"
> extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
> ;;
> aarch64*-*-linux*)
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h"
> + tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h"
> tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-linux.h"
> tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-linux"
> tm_defines="${tm_defines} TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1"
> @@ -1185,7 +1185,7 @@ alpha*-dec-*vms*)
> tmake_file="${tmake_file} alpha/t-vms alpha/t-alpha"
> ;;
> arc*-*-elf*)
> - tm_file="arc/arc-arch.h dbxelf.h elfos.h newlib-stdint.h arc/elf.h ${tm_file}"
> + tm_file="arc/arc-arch.h elfos.h newlib-stdint.h arc/elf.h ${tm_file}"
> tmake_file="arc/t-multilib arc/t-arc"
> extra_gcc_objs="driver-arc.o"
> if test "x$with_cpu" != x; then
> @@ -1206,7 +1206,7 @@ arc*-*-elf*)
> esac
> ;;
> arc*-*-linux*)
> - tm_file="arc/arc-arch.h dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arc/linux.h ${tm_file}"
> + tm_file="arc/arc-arch.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arc/linux.h ${tm_file}"
> tmake_file="${tmake_file} arc/t-multilib-linux arc/t-arc"
> extra_gcc_objs="driver-arc.o"
> if test "x$with_cpu" != x; then
> @@ -1242,7 +1242,7 @@ arm-wrs-vxworks7*)
> need_64bit_hwint=yes
> ;;
> arm*-*-freebsd*) # ARM FreeBSD EABI
> - tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h"
> + tm_file="elfos.h ${fbsd_tm_file} arm/elf.h"
> case $target in
> arm*b-*-freebsd*)
> tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
> @@ -1270,7 +1270,7 @@ arm*-*-freebsd*) # ARM FreeBSD EABI
> arm*-*-netbsdelf*)
> target_cpu_cname="strongarm"
> tmake_file="${tmake_file} arm/t-arm"
> - tm_file="dbxelf.h elfos.h ${nbsd_tm_file} arm/elf.h"
> + tm_file="elfos.h ${nbsd_tm_file} arm/elf.h"
> extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
> case ${target} in
> arm*eb-*) tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" ;;
> @@ -1299,7 +1299,7 @@ arm*-*-netbsdelf*)
> esac
> ;;
> arm*-*-linux-* | arm*-*-uclinuxfdpiceabi)
> - tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
> + tm_file="elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
> extra_options="${extra_options} linux-android.opt"
> case $target in
> arm*b-*-linux*)
> @@ -1337,7 +1337,7 @@ arm*-*-linux-* | arm*-*-uclinuxfdpiceabi)
> with_tls=${with_tls:-gnu}
> ;;
> arm*-*-uclinux*eabi*) # ARM ucLinux
> - tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
> + tm_file="elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
> tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf arm/t-bpabi"
> tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h arm/aout.h arm/arm.h"
> target_cpu_cname="arm7tdmi"
> @@ -1357,7 +1357,7 @@ arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtems* | arm*-*-fuchsia*)
> tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
> esac
> default_use_cxa_atexit=yes
> - tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
> + tm_file="elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
> tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf"
> target_cpu_cname="arm7tdmi"
> case ${target} in
> @@ -1386,7 +1386,7 @@ arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtems* | arm*-*-fuchsia*)
> tm_file="${tm_file} arm/aout.h arm/arm.h"
> ;;
> avr-*-*)
> - tm_file="elfos.h avr/elf.h avr/avr-arch.h avr/avr.h avr/specs.h dbxelf.h avr/avr-stdint.h"
> + tm_file="elfos.h avr/elf.h avr/avr-arch.h avr/avr.h avr/specs.h avr/avr-stdint.h"
> if test x${with_avrlibc} != xno; then
> tm_file="${tm_file} ${cpu_type}/avrlibc.h"
> tm_defines="${tm_defines} WITH_AVRLIBC"
> @@ -1519,26 +1519,26 @@ avr-*-*)
> extra_objs="avr-devices.o avr-log.o"
> ;;
> bfin*-elf*)
> - tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
> + tm_file="${tm_file} elfos.h newlib-stdint.h bfin/elf.h"
> tmake_file=bfin/t-bfin-elf
> use_collect2=no
> ;;
> bfin*-uclinux*)
> - tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h"
> + tm_file="${tm_file} elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h"
> tmake_file=bfin/t-bfin-uclinux
> use_collect2=no
> ;;
> bfin*-linux-uclibc*)
> - tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
> + tm_file="${tm_file} elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
> tmake_file="${tmake_file} bfin/t-bfin-linux"
> use_collect2=no
> ;;
> bfin*-rtems*)
> - tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h"
> + tm_file="${tm_file} elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h"
> tmake_file="${tmake_file} bfin/t-rtems"
> ;;
> bfin*-*)
> - tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
> + tm_file="${tm_file} elfos.h newlib-stdint.h bfin/elf.h"
> use_collect2=no
> use_gcc_stdint=wrap
> ;;
> @@ -1589,13 +1589,13 @@ csky-*-*)
>
> case ${target} in
> csky-*-elf*)
> - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} csky/csky-elf.h"
> + tm_file="elfos.h newlib-stdint.h ${tm_file} csky/csky-elf.h"
> tmake_file="csky/t-csky csky/t-csky-elf"
> default_use_cxa_atexit=no
> use_gcc_stdint=wrap
> ;;
> csky-*-linux*)
> - tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} csky/csky-linux-elf.h"
> + tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} csky/csky-linux-elf.h"
> tmake_file="${tmake_file} csky/t-csky csky/t-csky-linux"
>
> case ${target} in
> @@ -1622,7 +1622,7 @@ csky-*-*)
> esac
> ;;
> epiphany-*-elf | epiphany-*-rtems*)
> - tm_file="dbxelf.h elfos.h ${tm_file}"
> + tm_file="elfos.h ${tm_file}"
> tmake_file="${tmake_file} epiphany/t-epiphany"
> case ${target} in
> epiphany-*-rtems*)
> @@ -1638,21 +1638,21 @@ epiphany-*-elf | epiphany-*-rtems*)
> extra_headers="epiphany_intrinsics.h"
> ;;
> fr30-*-elf)
> - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
> + tm_file="elfos.h newlib-stdint.h ${tm_file}"
> ;;
> frv-*-elf)
> - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
> + tm_file="elfos.h newlib-stdint.h ${tm_file}"
> tmake_file=frv/t-frv
> ;;
> frv-*-*linux*)
> - tm_file="dbxelf.h elfos.h ${tm_file} \
> + tm_file="elfos.h ${tm_file} \
> gnu-user.h linux.h glibc-stdint.h frv/linux.h"
> tmake_file="${tmake_file} frv/t-frv frv/t-linux"
> ;;
> ft32-*-elf)
> gas=yes
> gnu_ld=yes
> - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
> + tm_file="elfos.h newlib-stdint.h ${tm_file}"
> tmake_file="${tmake_file} ft32/t-ft32"
> ;;
> amdgcn-*-amdhsa)
> @@ -1680,23 +1680,23 @@ amdgcn-*-amdhsa)
> moxie-*-elf)
> gas=yes
> gnu_ld=yes
> - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
> + tm_file="elfos.h newlib-stdint.h ${tm_file}"
> tmake_file="${tmake_file} moxie/t-moxie"
> ;;
> moxie-*-uclinux*)
> gas=yes
> gnu_ld=yes
> - tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h"
> + tm_file="elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h"
> tmake_file="${tmake_file} moxie/t-moxie"
> ;;
> moxie-*-rtems*)
> tmake_file="${tmake_file} moxie/t-moxie"
> - tm_file="moxie/moxie.h dbxelf.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h"
> + tm_file="moxie/moxie.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h"
> ;;
> moxie-*-moxiebox*)
> gas=yes
> gnu_ld=yes
> - tm_file="${tm_file} dbxelf.h elfos.h moxie/moxiebox.h newlib-stdint.h"
> + tm_file="${tm_file} elfos.h moxie/moxiebox.h newlib-stdint.h"
> tmake_file="${tmake_file} moxie/t-moxiebox"
> ;;
> h8300-*-elf*)
> @@ -1709,7 +1709,7 @@ h8300-*-linux*)
> ;;
> hppa*64*-*-linux*)
> target_cpu_default="MASK_PA_11|MASK_PA_20"
> - tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \
> + tm_file="pa/pa64-start.h ${tm_file} elfos.h gnu-user.h linux.h \
> glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
> pa/pa64-linux.h"
> tmake_file="${tmake_file} pa/t-pa pa/t-linux"
> @@ -1718,14 +1718,14 @@ hppa*64*-*-linux*)
> ;;
> hppa*-*-linux*)
> target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS|MASK_CALLER_COPIES"
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
> + tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
> pa/pa32-regs.h pa/pa32-linux.h"
> tmake_file="${tmake_file} pa/t-pa pa/t-linux"
> d_target_objs="${d_target_objs} pa-d.o"
> ;;
> hppa*-*-openbsd*)
> target_cpu_default="MASK_PA_11"
> - tm_file="${tm_file} dbxelf.h elfos.h openbsd.h openbsd-stdint.h openbsd-libpthread.h \
> + tm_file="${tm_file} elfos.h openbsd.h openbsd-stdint.h openbsd-libpthread.h \
> pa/pa-openbsd.h pa/pa32-regs.h pa/pa32-openbsd.h"
> extra_options="${extra_options} openbsd.opt"
> tmake_file="pa/t-pa"
> @@ -1735,7 +1735,7 @@ hppa*-*-openbsd*)
> ;;
> hppa*-*-netbsd*)
> target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
> - tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file} \
> + tm_file="${tm_file} elfos.h ${nbsd_tm_file} \
> pa/pa-netbsd.h pa/pa32-regs.h pa/pa32-netbsd.h"
> tmake_file="${tmake_file}"
> tm_defines="${tm_defines} CHAR_FAST8=1 SHORT_FAST16=1"
> @@ -1747,7 +1747,7 @@ hppa*64*-*-hpux11*)
> then
> target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
> fi
> - tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
> + tm_file="pa/pa64-start.h ${tm_file} elfos.h \
> pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
> pa/pa-hpux11.h"
> case ${target} in
> @@ -1807,55 +1807,55 @@ x86_64-*-darwin*)
> tm_file="${cpu_type}/darwin64-biarch.h ${tm_file} "
> ;;
> i[34567]86-*-elfiamcu)
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/iamcu.h"
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/iamcu.h"
> ;;
> i[34567]86-*-elf*)
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h"
> ;;
> x86_64-*-elf*)
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
> ;;
> x86_64-*-rtems*)
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rtemself.h rtems.h"
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rtemself.h rtems.h"
> ;;
> i[34567]86-*-rdos*)
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/rdos.h"
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/rdos.h"
> ;;
> x86_64-*-rdos*)
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rdos.h i386/rdos64.h"
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rdos.h i386/rdos64.h"
> tmake_file="i386/t-i386elf t-svr4"
> ;;
> i[34567]86-*-dragonfly*)
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h dragonfly.h dragonfly-stdint.h i386/dragonfly.h"
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h dragonfly.h dragonfly-stdint.h i386/dragonfly.h"
> tmake_file="${tmake_file} i386/t-crtstuff"
> ;;
> x86_64-*-dragonfly*)
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h dragonfly.h dragonfly-stdint.h i386/x86-64.h i386/dragonfly.h"
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h dragonfly.h dragonfly-stdint.h i386/x86-64.h i386/dragonfly.h"
> tmake_file="${tmake_file} i386/t-crtstuff"
> ;;
> i[34567]86-*-freebsd*)
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
> ;;
> x86_64-*-freebsd*)
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
> ;;
> i[34567]86-*-netbsdelf*)
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${nbsd_tm_file} i386/netbsd-elf.h"
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h ${nbsd_tm_file} i386/netbsd-elf.h"
> extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
> ;;
> x86_64-*-netbsd*)
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${nbsd_tm_file} i386/x86-64.h i386/netbsd64.h"
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h ${nbsd_tm_file} i386/x86-64.h i386/netbsd64.h"
> extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
> ;;
> i[34567]86-*-openbsd*)
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h"
> tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
> extra_options="${extra_options} openbsd.opt"
> gas=yes
> gnu_ld=yes
> ;;
> x86_64-*-openbsd*)
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h"
> tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/x86-64.h i386/openbsdelf.h"
> extra_options="${extra_options} openbsd.opt"
> gas=yes
> @@ -1864,7 +1864,7 @@ x86_64-*-openbsd*)
> i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
> # Intel 80386's running GNU/*
> # with ELF format using glibc 2
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h"
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h gnu-user.h glibc-stdint.h"
> case ${target} in
> i[34567]86-*-linux*)
> tm_file="${tm_file} linux.h linux-android.h"
> @@ -1921,7 +1921,7 @@ i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-gnu* | i[34567]8
> esac
> ;;
> x86_64-*-linux* | x86_64-*-kfreebsd*-gnu)
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h \
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h gnu-user.h glibc-stdint.h \
> i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h"
> case ${target} in
> x86_64-*-linux*)
> @@ -1959,7 +1959,7 @@ x86_64-*-linux* | x86_64-*-kfreebsd*-gnu)
> ;;
> i[34567]86-pc-msdosdjgpp*)
> xm_file=i386/xm-djgpp.h
> - tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h i386/djgpp-stdint.h"
> + tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h i386/djgpp-stdint.h"
> native_system_header_dir=/dev/env/DJDIR/include
> extra_options="${extra_options} i386/djgpp.opt"
> gnu_ld=yes
> @@ -1968,7 +1968,7 @@ i[34567]86-pc-msdosdjgpp*)
> ;;
> i[34567]86-*-lynxos*)
> xm_defines=POSIX
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h i386/lynx.h lynx.h"
> tmake_file="${tmake_file} t-lynx"
> extra_options="${extra_options} lynx.opt"
> thread_file=lynx
> @@ -1976,13 +1976,13 @@ i[34567]86-*-lynxos*)
> gas=yes
> ;;
> i[34567]86-*-nto-qnx*)
> - tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h"
> + tm_file="${tm_file} i386/att.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h"
> extra_options="${extra_options} i386/nto.opt"
> gnu_ld=yes
> gas=yes
> ;;
> i[34567]86-*-rtems*)
> - tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
> + tm_file="${tm_file} i386/unix.h i386/att.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
> tmake_file="${tmake_file} i386/t-rtems"
> ;;
> i[34567]86-*-solaris2* | x86_64-*-solaris2*)
> @@ -2031,7 +2031,7 @@ i[4567]86-wrs-vxworks*|x86_64-wrs-vxworks7*)
> esac
> ;;
> i[34567]86-*-cygwin*)
> - tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
> + tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
> xm_file=i386/xm-cygwin.h
> tmake_file="${tmake_file} i386/t-cygming t-slibgcc"
> target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.cc"
> @@ -2049,7 +2049,7 @@ i[34567]86-*-cygwin*)
> ;;
> x86_64-*-cygwin*)
> need_64bit_isa=yes
> - tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-w64.h i386/cygwin-stdint.h"
> + tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/cygming.h i386/cygwin.h i386/cygwin-w64.h i386/cygwin-stdint.h"
> xm_file=i386/xm-cygwin.h
> tmake_file="${tmake_file} i386/t-cygming t-slibgcc i386/t-cygwin-w64"
> target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.cc"
> @@ -2067,7 +2067,7 @@ x86_64-*-cygwin*)
> tm_defines="${tm_defines} TARGET_CYGWIN64=1"
> ;;
> i[34567]86-*-mingw* | x86_64-*-mingw*)
> - tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h"
> + tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/cygming.h"
> xm_file=i386/xm-mingw32.h
> c_target_objs="${c_target_objs} winnt-c.o"
> cxx_target_objs="${cxx_target_objs} winnt-c.o"
> @@ -2161,7 +2161,7 @@ x86_64-*-fuchsia*)
> tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h fuchsia.h"
> ;;
> ia64*-*-elf*)
> - tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
> + tm_file="${tm_file} elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
> tmake_file="ia64/t-ia64"
> target_cpu_default="0"
> if test x$gas = xyes
> @@ -2174,17 +2174,17 @@ ia64*-*-elf*)
> fi
> ;;
> ia64*-*-freebsd*)
> - tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
> + tm_file="${tm_file} elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
> target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
> tmake_file="${tmake_file} ia64/t-ia64"
> ;;
> ia64*-*-linux*)
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
> + tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
> tmake_file="${tmake_file} ia64/t-ia64 ia64/t-linux t-libunwind"
> target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
> ;;
> ia64*-*-hpux*)
> - tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/hpux.h"
> + tm_file="${tm_file} elfos.h ia64/sysv4.h ia64/hpux.h"
> tmake_file="ia64/t-ia64 ia64/t-hpux t-slibgcc"
> target_cpu_default="MASK_GNU_AS"
> case x$enable_threads in
> @@ -2220,16 +2220,16 @@ iq2000*-*-elf*)
> md_file=iq2000/iq2000.md
> ;;
> lm32-*-elf*)
> - tm_file="dbxelf.h elfos.h ${tm_file} newlib-stdint.h"
> + tm_file="elfos.h ${tm_file} newlib-stdint.h"
> tmake_file="${tmake_file} lm32/t-lm32"
> ;;
> lm32-*-rtems*)
> - tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h"
> + tm_file="elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h"
> tmake_file="${tmake_file} lm32/t-lm32"
> tmake_file="${tmake_file} lm32/t-rtems"
> ;;
> lm32-*-uclinux*)
> - tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h"
> + tm_file="elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h"
> tmake_file="${tmake_file} lm32/t-lm32"
> ;;
> m32r-*-elf*)
> @@ -2257,7 +2257,7 @@ m68k-*-elf* | fido-*-elf*)
> default_cf_cpu=5206
> ;;
> esac
> - tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
> + tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
> tm_defines="${tm_defines} MOTOROLA=1"
> tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
> # Add multilibs for targets other than fido.
> @@ -2272,7 +2272,7 @@ m68k-*-elf* | fido-*-elf*)
> m68k*-*-netbsdelf*)
> default_m68k_cpu=68020
> default_cf_cpu=5475
> - tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file} m68k/netbsd-elf.h"
> + tm_file="${tm_file} elfos.h ${nbsd_tm_file} m68k/netbsd-elf.h"
> extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
> tm_defines="${tm_defines} MOTOROLA=1 CHAR_FAST8=1 SHORT_FAST16=1"
> ;;
> @@ -2281,7 +2281,7 @@ m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
> # ABI.
> default_m68k_cpu=68020
> default_cf_cpu=5206
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
> + tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
> extra_options="${extra_options} m68k/uclinux.opt"
> tm_defines="${tm_defines} MOTOROLA=1"
> tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
> @@ -2292,7 +2292,7 @@ m68k-*-linux*) # Motorola m68k's running GNU/Linux
> default_m68k_cpu=68020
> default_cf_cpu=5475
> with_arch=${with_arch:-m68k}
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
> + tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
> extra_options="${extra_options} m68k/ieee.opt"
> tm_defines="${tm_defines} MOTOROLA=1"
> tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
> @@ -2301,11 +2301,11 @@ m68k-*-rtems*)
> default_m68k_cpu=68020
> default_cf_cpu=5206
> tmake_file="${tmake_file} m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff m68k/t-rtems m68k/t-mlibs"
> - tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
> + tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
> tm_defines="${tm_defines} MOTOROLA=1"
> ;;
> mcore-*-elf)
> - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
> + tm_file="elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
> tmake_file=mcore/t-mcore
> inhibit_libc=true
> ;;
> @@ -2318,7 +2318,7 @@ microblaze*-linux*)
> tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
> ;;
> esac
> - tm_file="${tm_file} dbxelf.h gnu-user.h linux.h microblaze/linux.h"
> + tm_file="${tm_file} gnu-user.h linux.h microblaze/linux.h"
> tm_file="${tm_file} glibc-stdint.h"
> c_target_objs="${c_target_objs} microblaze-c.o"
> cxx_target_objs="${cxx_target_objs} microblaze-c.o"
> @@ -2334,7 +2334,7 @@ microblaze*-*-rtems*)
> tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
> ;;
> esac
> - tm_file="${tm_file} dbxelf.h"
> + tm_file="${tm_file}"
> tm_file="${tm_file} microblaze/rtems.h rtems.h newlib-stdint.h"
> c_target_objs="${c_target_objs} microblaze-c.o"
> cxx_target_objs="${cxx_target_objs} microblaze-c.o"
> @@ -2350,7 +2350,7 @@ microblaze*-*-elf)
> tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
> ;;
> esac
> - tm_file="${tm_file} dbxelf.h newlib-stdint.h"
> + tm_file="${tm_file} newlib-stdint.h"
> c_target_objs="${c_target_objs} microblaze-c.o"
> cxx_target_objs="${cxx_target_objs} microblaze-c.o"
> tmake_file="${tmake_file} microblaze/t-microblaze"
> @@ -2418,7 +2418,7 @@ riscv*-*-freebsd*)
> ;;
>
> loongarch*-*-linux*)
> - tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file}"
> + tm_file="elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file}"
> tm_file="${tm_file} loongarch/gnu-user.h loongarch/linux.h"
> extra_options="${extra_options} linux-android.opt"
> tmake_file="${tmake_file} loongarch/t-linux"
> @@ -2436,7 +2436,7 @@ mips*-*-netbsd*) # NetBSD/mips, either endian.
> extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
> ;;
> mips*-img-linux*)
> - tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h"
> + tm_file="elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h"
> extra_options="${extra_options} linux-android.opt"
> tmake_file="${tmake_file} mips/t-img-linux"
> tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6 MIPS_ABI_DEFAULT=ABI_32"
> @@ -2446,7 +2446,7 @@ mips*-img-linux*)
> gas=yes
> ;;
> mips*-mti-linux*)
> - tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h"
> + tm_file="elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h"
> extra_options="${extra_options} linux-android.opt"
> tmake_file="${tmake_file} mips/t-mti-linux"
> tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2 MIPS_ABI_DEFAULT=ABI_32"
> @@ -2456,7 +2456,7 @@ mips*-mti-linux*)
> gas=yes
> ;;
> mips*-*-linux*) # Linux MIPS, either endian.
> - tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h"
> + tm_file="elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h"
> extra_options="${extra_options} linux-android.opt"
> case ${target} in
> mipsisa32r6*)
> @@ -2668,7 +2668,7 @@ mn10300-*-*)
> use_gcc_stdint=wrap
> ;;
> msp430-*-*)
> - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
> + tm_file="elfos.h newlib-stdint.h ${tm_file}"
> c_target_objs="msp430-c.o"
> cxx_target_objs="msp430-c.o"
> tmake_file="${tmake_file} msp430/t-msp430"
> @@ -2706,11 +2706,11 @@ nds32*-*-*)
> esac
> case ${target} in
> nds32*-*-elf*)
> - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} nds32/elf.h nds32/nds32_intrinsic.h"
> + tm_file="elfos.h newlib-stdint.h ${tm_file} nds32/elf.h nds32/nds32_intrinsic.h"
> tmake_file="nds32/t-nds32 nds32/t-elf"
> ;;
> nds32*-*-linux*)
> - tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h nds32/linux.h nds32/nds32_intrinsic.h"
> + tm_file="elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h nds32/linux.h nds32/nds32_intrinsic.h"
> tmake_file="${tmake_file} nds32/t-nds32 nds32/t-linux"
> gcc_cv_initfini_array=yes
> ;;
> @@ -2831,7 +2831,7 @@ powerpc64-*-darwin*)
> tm_file="${tm_file} ${cpu_type}/darwin64-biarch.h"
> ;;
> powerpc*-*-freebsd*)
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h ${fbsd_tm_file} rs6000/sysv4.h"
> + tm_file="${tm_file} elfos.h gnu-user.h ${fbsd_tm_file} rs6000/sysv4.h"
> extra_options="${extra_options} rs6000/sysv4.opt"
> tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
> case ${target} in
> @@ -2856,47 +2856,47 @@ powerpc*-*-freebsd*)
> esac
> ;;
> powerpc-*-netbsd*)
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h ${nbsd_tm_file} freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
> + tm_file="${tm_file} elfos.h gnu-user.h ${nbsd_tm_file} freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
> extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
> tmake_file="${tmake_file} rs6000/t-netbsd"
> extra_options="${extra_options} rs6000/sysv4.opt"
> ;;
> powerpc-*-eabisimaltivec*)
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
> + tm_file="${tm_file} elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
> extra_options="${extra_options} rs6000/sysv4.opt"
> tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
> use_gcc_stdint=wrap
> ;;
> powerpc-*-eabisim*)
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
> + tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
> extra_options="${extra_options} rs6000/sysv4.opt"
> tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
> use_gcc_stdint=wrap
> ;;
> powerpc-*-elf*)
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
> + tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
> extra_options="${extra_options} rs6000/sysv4.opt"
> tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
> ;;
> powerpc-*-eabialtivec*)
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
> + tm_file="${tm_file} elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
> extra_options="${extra_options} rs6000/sysv4.opt"
> tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
> use_gcc_stdint=wrap
> ;;
> powerpc-*-eabi*)
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h"
> + tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h"
> extra_options="${extra_options} rs6000/sysv4.opt"
> tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
> use_gcc_stdint=wrap
> ;;
> powerpc-*-rtems*)
> - tm_file="rs6000/biarch64.h ${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/rtems.h rtems.h"
> + tm_file="rs6000/biarch64.h ${tm_file} elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/rtems.h rtems.h"
> extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
> tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-rtems rs6000/t-ppccomm"
> ;;
> powerpc*-*-linux*)
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h freebsd-spec.h rs6000/sysv4.h"
> + tm_file="${tm_file} elfos.h gnu-user.h linux.h freebsd-spec.h rs6000/sysv4.h"
> extra_options="${extra_options} rs6000/sysv4.opt"
> tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm"
> extra_objs="$extra_objs rs6000-linux.o"
> @@ -3003,7 +3003,7 @@ powerpc-wrs-vxworks*)
> ;;
> powerpc-*-lynxos*)
> xm_defines=POSIX
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
> + tm_file="${tm_file} elfos.h gnu-user.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
> tmake_file="t-lynx rs6000/t-lynx"
> extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
> thread_file=lynx
> @@ -3011,18 +3011,18 @@ powerpc-*-lynxos*)
> gas=yes
> ;;
> powerpcle-*-elf*)
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
> + tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
> tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
> extra_options="${extra_options} rs6000/sysv4.opt"
> ;;
> powerpcle-*-eabisim*)
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
> + tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
> tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
> extra_options="${extra_options} rs6000/sysv4.opt"
> use_gcc_stdint=wrap
> ;;
> powerpcle-*-eabi*)
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
> + tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
> tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
> extra_options="${extra_options} rs6000/sysv4.opt"
> use_gcc_stdint=wrap
> @@ -3080,7 +3080,7 @@ rl78-*-elf*)
> tmake_file="${tmake_file} rl78/t-rl78"
> ;;
> rx-*-elf*)
> - tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
> + tm_file="elfos.h newlib-stdint.h ${tm_file}"
> tmake_file="${tmake_file} rx/t-rx"
> extra_options="${extra_options} rx/elf.opt"
> ;;
> @@ -3089,7 +3089,7 @@ rx-*-linux*)
> tmake_file="${tmake_file} rx/t-linux"
> ;;
> s390-*-linux*)
> - tm_file="s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
> + tm_file="s390/s390.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
> c_target_objs="${c_target_objs} s390-c.o"
> cxx_target_objs="${cxx_target_objs} s390-c.o"
> if test x$enable_targets = xall; then
> @@ -3098,7 +3098,7 @@ s390-*-linux*)
> tmake_file="${tmake_file} s390/t-s390"
> ;;
> s390x-*-linux*)
> - tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
> + tm_file="s390/s390x.h s390/s390.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
> tm_p_file="linux-protos.h s390/s390-protos.h"
> c_target_objs="${c_target_objs} s390-c.o"
> cxx_target_objs="${cxx_target_objs} s390-c.o"
> @@ -3108,7 +3108,7 @@ s390x-*-linux*)
> tmake_file="${tmake_file} s390/t-linux64 s390/t-s390"
> ;;
> s390x-ibm-tpf*)
> - tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h glibc-stdint.h s390/tpf.h"
> + tm_file="s390/s390x.h s390/s390.h elfos.h glibc-stdint.h s390/tpf.h"
> tm_p_file=s390/s390-protos.h
> c_target_objs="${c_target_objs} s390-c.o"
> cxx_target_objs="${cxx_target_objs} s390-c.o"
> @@ -3147,7 +3147,7 @@ sh-*-elf* | sh[12346l]*-*-elf* | \
> case ${with_endian} in
> little*) tm_file="sh/little.h ${tm_file}" ;;
> esac
> - tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h"
> + tm_file="${tm_file} elfos.h sh/elf.h"
> case ${target} in
> sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
> if test x$enable_fdpic = xyes; then
> @@ -3268,14 +3268,14 @@ sh-*-elf* | sh[12346l]*-*-elf* | \
> ;;
> sh-*-rtems*)
> tmake_file="${tmake_file} sh/t-sh sh/t-rtems"
> - tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
> + tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
> ;;
> sh-wrs-vxworks)
> tmake_file="$tmake_file sh/t-sh sh/t-vxworks"
> tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
> ;;
> sparc-*-elf*)
> - tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h"
> + tm_file="${tm_file} elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h"
> case ${target} in
> *-leon-*)
> tmake_file="sparc/t-sparc sparc/t-leon"
> @@ -3289,11 +3289,11 @@ sparc-*-elf*)
> esac
> ;;
> sparc-*-rtems*)
> - tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
> + tm_file="${tm_file} elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
> tmake_file="${tmake_file} sparc/t-sparc sparc/t-rtems"
> ;;
> sparc-*-linux*)
> - tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/tso.h"
> + tm_file="${tm_file} elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/tso.h"
> extra_options="${extra_options} sparc/long-double-switch.opt"
> case ${target} in
> *-leon-*)
> @@ -3315,7 +3315,7 @@ sparc-*-linux*)
> fi
> ;;
> sparc-*-netbsdelf*)
> - tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h"
> + tm_file="${tm_file} elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h"
> extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
> extra_options="${extra_options} sparc/long-double-switch.opt"
> tmake_file="${tmake_file} sparc/t-sparc"
> @@ -3337,22 +3337,22 @@ sparc-wrs-vxworks)
> tmake_file="${tmake_file} sparc/t-sparc sparc/t-vxworks"
> ;;
> sparc64-*-elf*)
> - tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
> + tm_file="${tm_file} elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
> extra_options="${extra_options}"
> tmake_file="${tmake_file} sparc/t-sparc"
> ;;
> sparc64-*-rtems*)
> - tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
> + tm_file="${tm_file} elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
> extra_options="${extra_options}"
> tmake_file="${tmake_file} sparc/t-sparc sparc/t-rtems-64"
> ;;
> sparc64-*-linux*)
> - tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/default64.h sparc/linux64.h sparc/tso.h"
> + tm_file="sparc/biarch64.h ${tm_file} elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/default64.h sparc/linux64.h sparc/tso.h"
> extra_options="${extra_options} sparc/long-double-switch.opt"
> tmake_file="${tmake_file} sparc/t-sparc sparc/t-linux64"
> ;;
> sparc64-*-freebsd*|ultrasparc-*-freebsd*)
> - tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
> + tm_file="${tm_file} ${fbsd_tm_file} elfos.h sparc/sysv4.h sparc/freebsd.h"
> extra_options="${extra_options} sparc/long-double-switch.opt"
> case "x$with_cpu" in
> xultrasparc) ;;
> @@ -3363,13 +3363,13 @@ sparc64-*-freebsd*|ultrasparc-*-freebsd*)
> ;;
> sparc64-*-netbsd*)
> tm_file="sparc/biarch64.h ${tm_file}"
> - tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h"
> + tm_file="${tm_file} elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h"
> extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
> extra_options="${extra_options} sparc/long-double-switch.opt"
> tmake_file="${tmake_file} sparc/t-sparc sparc/t-netbsd64"
> ;;
> sparc64-*-openbsd*)
> - tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp64-elf.h"
> + tm_file="sparc/openbsd1-64.h ${tm_file} elfos.h sparc/sysv4.h sparc/sp64-elf.h"
> tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
> extra_options="${extra_options} openbsd.opt"
> extra_options="${extra_options}"
> @@ -3379,13 +3379,13 @@ sparc64-*-openbsd*)
> ;;
> tic6x-*-elf)
> tm_file="elfos.h ${tm_file} c6x/elf-common.h c6x/elf.h"
> - tm_file="${tm_file} dbxelf.h tm-dwarf2.h newlib-stdint.h"
> + tm_file="${tm_file} tm-dwarf2.h newlib-stdint.h"
> tmake_file="c6x/t-c6x c6x/t-c6x-elf"
> use_collect2=no
> ;;
> tic6x-*-uclinux)
> tm_file="elfos.h ${tm_file} gnu-user.h linux.h c6x/elf-common.h c6x/uclinux-elf.h"
> - tm_file="${tm_file} dbxelf.h tm-dwarf2.h glibc-stdint.h"
> + tm_file="${tm_file} tm-dwarf2.h glibc-stdint.h"
> tm_file="${tm_file} ./sysroot-suffix.h"
> tmake_file="t-sysroot-suffix t-slibgcc"
> tmake_file="${tmake_file} c6x/t-c6x c6x/t-c6x-elf c6x/t-c6x-uclinux"
> @@ -3429,7 +3429,7 @@ v850*-*-*)
> use_gcc_stdint=wrap
> ;;
> vax-*-linux*)
> - tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h"
> + tm_file="${tm_file} elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h"
> extra_options="${extra_options} vax/elf.opt"
> ;;
> vax-*-netbsdelf*)
> @@ -3438,12 +3438,12 @@ vax-*-netbsdelf*)
> tm_defines="${tm_defines} CHAR_FAST8=1 SHORT_FAST16=1"
> ;;
> visium-*-elf*)
> - tm_file="dbxelf.h elfos.h ${tm_file} visium/elf.h newlib-stdint.h"
> + tm_file="elfos.h ${tm_file} visium/elf.h newlib-stdint.h"
> tmake_file="visium/t-visium visium/t-crtstuff"
> ;;
> xstormy16-*-elf)
> # For historical reasons, the target files omit the 'x'.
> - tm_file="dbxelf.h elfos.h newlib-stdint.h stormy16/stormy16.h"
> + tm_file="elfos.h newlib-stdint.h stormy16/stormy16.h"
> tm_p_file=stormy16/stormy16-protos.h
> tm_d_file="elfos.h stormy16/stormy16.h"
> md_file=stormy16/stormy16.md
> diff --git a/gcc/config.in b/gcc/config.in
> index abab9bf5024..9c53319b544 100644
> --- a/gcc/config.in
> +++ b/gcc/config.in
> @@ -452,12 +452,6 @@
> #endif
>
>
> -/* Define if your assembler supports the --gstabs option. */
> -#ifndef USED_FOR_TARGET
> -#undef HAVE_AS_GSTABS_DEBUG_FLAG
> -#endif
> -
> -
> /* Define if your assembler supports the Sun syntax for cmov. */
> #ifndef USED_FOR_TARGET
> #undef HAVE_AS_IX86_CMOV_SUN_SYNTAX
> @@ -746,12 +740,6 @@
> #endif
>
>
> -/* Define if your assembler supports .stabs. */
> -#ifndef USED_FOR_TARGET
> -#undef HAVE_AS_STABS_DIRECTIVE
> -#endif
> -
> -
> /* Define if your assembler and linker support thread-local storage. */
> #ifndef USED_FOR_TARGET
> #undef HAVE_AS_TLS
> @@ -2111,13 +2099,6 @@
> #endif
>
>
> -/* Define if your assembler supports AIX debug frame section label reference.
> - */
> -#ifndef USED_FOR_TARGET
> -#undef HAVE_XCOFF_DWARF_EXTRAS
> -#endif
> -
> -
> /* Define if you have a working <zstd.h> header file. */
> #ifndef USED_FOR_TARGET
> #undef HAVE_ZSTD_H
> diff --git a/gcc/config/aarch64/aarch64-elf.h b/gcc/config/aarch64/aarch64-elf.h
> index 410a40b51ca..8e05b1f1cbe 100644
> --- a/gcc/config/aarch64/aarch64-elf.h
> +++ b/gcc/config/aarch64/aarch64-elf.h
> @@ -144,7 +144,4 @@ ASM_MABI_SPEC
> #undef TYPE_OPERAND_FMT
> #define TYPE_OPERAND_FMT "%%%s"
>
> -/* Stabs debug not required. */
> -#undef DBX_DEBUGGING_INFO
> -
> #endif /* GCC_AARCH64_ELF_H */
> diff --git a/gcc/config/alpha/alpha.cc b/gcc/config/alpha/alpha.cc
> index 0a85e66fa89..66c17149d4d 100644
> --- a/gcc/config/alpha/alpha.cc
> +++ b/gcc/config/alpha/alpha.cc
> @@ -8458,10 +8458,6 @@ alpha_output_mi_thunk_osf (FILE *file, tree thunk_fndecl ATTRIBUTE_UNUSED,
> }
> #endif /* TARGET_ABI_OSF */
>
> -/* Debugging support. */
> -
> -#include "gstab.h"
> -
> /* Name of the file containing the current function. */
>
> static const char *current_function_file = "";
> diff --git a/gcc/config/alpha/elf.h b/gcc/config/alpha/elf.h
> index 4447a7f24ad..c9cd42e69f8 100644
> --- a/gcc/config/alpha/elf.h
> +++ b/gcc/config/alpha/elf.h
> @@ -22,7 +22,7 @@ along with GCC; see the file COPYING3. If not see
> #define CC1_SPEC "%{G*}"
>
> #undef ASM_SPEC
> -#define ASM_SPEC "%{G*} %{relax:-relax} %{!gstabs*:-no-mdebug}%{gstabs*:-mdebug} %{mcpu=*:-m%*}"
> +#define ASM_SPEC "%{G*} %{relax:-relax} %{mcpu=*:-m%*}"
>
> /* Do not output a .file directive at the beginning of the input file. */
>
> diff --git a/gcc/config/arc/arc.h b/gcc/config/arc/arc.h
> index 539a1662084..0cb560b8a38 100644
> --- a/gcc/config/arc/arc.h
> +++ b/gcc/config/arc/arc.h
> @@ -1330,12 +1330,7 @@ do { \
>
> /* Debugging information. */
>
> -/* Generate DBX and DWARF debugging information. */
> -#ifdef DBX_DEBUGGING_INFO
> -#undef DBX_DEBUGGING_INFO
> -#endif
> -#define DBX_DEBUGGING_INFO
> -
> +/* Generate DWARF debugging information. */
> #ifdef DWARF2_DEBUGGING_INFO
> #undef DWARF2_DEBUGGING_INFO
> #endif
> @@ -1385,9 +1380,6 @@ do { \
>
> #define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, 2)
>
> -/* Turn off splitting of long stabs. */
> -#define DBX_CONTIN_LENGTH 0
> -
> /* Miscellaneous. */
>
> /* Specify the machine mode that this machine uses
> diff --git a/gcc/config/arm/aout.h b/gcc/config/arm/aout.h
> index b918ad3782f..cfb8db52c59 100644
> --- a/gcc/config/arm/aout.h
> +++ b/gcc/config/arm/aout.h
> @@ -145,15 +145,6 @@
> #define NO_DOLLAR_IN_LABEL 1
> #endif
>
> -/* Generate DBX debugging information. riscix.h will undefine this because
> - the native assembler does not support stabs. */
> -#define DBX_DEBUGGING_INFO 1
> -
> -/* Acorn dbx moans about continuation chars, so don't use any. */
> -#ifndef DBX_CONTIN_LENGTH
> -#define DBX_CONTIN_LENGTH 0
> -#endif
> -
> /* Output a function label definition. */
> #ifndef ASM_DECLARE_FUNCTION_NAME
> #define ASM_DECLARE_FUNCTION_NAME(STREAM, NAME, DECL) \
> diff --git a/gcc/config/arm/netbsd-elf.h b/gcc/config/arm/netbsd-elf.h
> index d239c734c5c..ef1bba28077 100644
> --- a/gcc/config/arm/netbsd-elf.h
> +++ b/gcc/config/arm/netbsd-elf.h
> @@ -85,9 +85,6 @@
> #undef PTRDIFF_TYPE
> #define PTRDIFF_TYPE "long int"
>
> -/* We don't have any limit on the length as out debugger is GDB. */
> -#undef DBX_CONTIN_LENGTH
> -
> /* NetBSD does its profiling differently to the Acorn compiler. We
> don't need a word following the mcount call; and to skip it
> requires either an assembly stub or use of fomit-frame-pointer when
> diff --git a/gcc/config/darwin.h b/gcc/config/darwin.h
> index c5e1ba84e6f..d1b4f277c2e 100644
> --- a/gcc/config/darwin.h
> +++ b/gcc/config/darwin.h
> @@ -396,10 +396,10 @@ extern GTY(()) int darwin_ms_struct;
>
> #define DSYMUTIL_SPEC \
> "%{!c:%{!E:%{!S:%{!r:%{!M:%{!MM:%{!fsyntax-only:%{!fdump=*:\
> - %{g*:%{!gctf:%{!gbtf:%{!gstabs*:%{%:debug-level-gt(0): -idsym \
> + %{g*:%{!gctf:%{!gbtf:%{%:debug-level-gt(0): -idsym \
> %{.c|.cc|.C|.cpp|.cp|.c++|.cxx|.CPP|.m|.mm|.s|.f|.f90|\
> .f95|.f03|.f77|.for|.F|.F90|.F95|.F03|.d: -dsym }\
> - }}}}}\
> + }}}}\
> }}}}}}}}"
>
> #define LINK_COMMAND_SPEC LINK_COMMAND_SPEC_A DSYMUTIL_SPEC
> @@ -583,14 +583,7 @@ extern GTY(()) int darwin_ms_struct;
> "%{static} -arch %(darwin_arch) " \
> ASM_OPTIONS ASM_MMACOSX_VERSION_MIN_SPEC
>
> -#ifdef HAVE_AS_STABS_DIRECTIVE
> -/* We only pass a debug option to the assembler if that supports stabs, since
> - dwarf is not uniformly supported in the assemblers. */
> -#define ASM_DEBUG_SPEC "%{g*:%{%:debug-level-gt(0):%{!gdwarf*:--gstabs}}}"
> -#else
> #define ASM_DEBUG_SPEC ""
> -#endif
> -
> #undef ASM_DEBUG_OPTION_SPEC
> #define ASM_DEBUG_OPTION_SPEC ""
>
> @@ -604,10 +597,6 @@ ASM_OPTIONS ASM_MMACOSX_VERSION_MIN_SPEC
> #define DWARF2_DEBUGGING_INFO 1
> #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
>
> -#ifdef HAVE_AS_STABS_DIRECTIVE
> -#define DBX_DEBUGGING_INFO 1
> -#endif
> -
> #define DEBUG_FRAME_SECTION "__DWARF,__debug_frame,regular,debug"
> #define DEBUG_INFO_SECTION "__DWARF,__debug_info,regular,debug"
> #define DEBUG_ABBREV_SECTION "__DWARF,__debug_abbrev,regular,debug"
> @@ -639,18 +628,6 @@ ASM_OPTIONS ASM_MMACOSX_VERSION_MIN_SPEC
> ? "__DWARF,__debug_gnu_pubt,regular,debug" \
> : "__DWARF,__debug_pubtypes,regular,debug")
>
> -/* When generating stabs debugging, use N_BINCL entries. */
> -
> -#define DBX_USE_BINCL
> -
> -/* There is no limit to the length of stabs strings. */
> -
> -#define DBX_CONTIN_LENGTH 0
> -
> -/* gdb needs a null N_SO at the end of each file for scattered loading. */
> -
> -#define DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
> -
> /* GCC's definition of 'one_only' is the same as its definition of 'weak'. */
> #define MAKE_DECL_ONE_ONLY(DECL) (DECL_WEAK (DECL) = 1)
>
> diff --git a/gcc/config/dbxcoff.h b/gcc/config/dbxcoff.h
> deleted file mode 100644
> index 02b78c6bf3c..00000000000
> --- a/gcc/config/dbxcoff.h
> +++ /dev/null
> @@ -1,56 +0,0 @@
> -/* Definitions needed when using stabs embedded in COFF sections.
> - Copyright (C) 1996-2022 Free Software Foundation, Inc.
> -
> -This file is part of GCC.
> -
> -GCC is free software; you can redistribute it and/or modify
> -it under the terms of the GNU General Public License as published by
> -the Free Software Foundation; either version 3, or (at your option)
> -any later version.
> -
> -GCC is distributed in the hope that it will be useful,
> -but WITHOUT ANY WARRANTY; without even the implied warranty of
> -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -GNU General Public License for more details.
> -
> -You should have received a copy of the GNU General Public License
> -along with GCC; see the file COPYING3. If not see
> -<http://www.gnu.org/licenses/>. */
> -
> -/* This file may be included by any COFF target which wishes to
> - support -gstabs generating stabs in sections, as produced by gas
> - and understood by gdb. */
> -
> -/* Output DBX (stabs) debugging information if doing -gstabs. */
> -
> -#define DBX_DEBUGGING_INFO 1
> -
> -/* Be function-relative for block and source line stab directives. */
> -
> -#define DBX_BLOCKS_FUNCTION_RELATIVE 1
> -
> -/* but, to make this work, functions must appear prior to line info. */
> -
> -#define DBX_FUNCTION_FIRST
> -
> -/* Generate a blank trailing N_SO to mark the end of the .o file, since
> - we can't depend upon the linker to mark .o file boundaries with
> - embedded stabs. */
> -
> -#define DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
> -
> -/* Like block addresses, stabs line numbers are relative to the
> - current function. */
> -
> -#define DBX_LINES_FUNCTION_RELATIVE 1
> -
> -/* When generating stabs debugging, use N_BINCL entries. */
> -
> -#undef DBX_USE_BINCL
> -#define DBX_USE_BINCL
> -
> -/* There is no limit to the length of stabs strings. */
> -
> -#ifndef DBX_CONTIN_LENGTH
> -#define DBX_CONTIN_LENGTH 0
> -#endif
> diff --git a/gcc/config/dbxelf.h b/gcc/config/dbxelf.h
> deleted file mode 100644
> index 4b90e95bc74..00000000000
> --- a/gcc/config/dbxelf.h
> +++ /dev/null
> @@ -1,68 +0,0 @@
> -/* Definitions needed when using stabs embedded in ELF sections.
> - Copyright (C) 1999-2022 Free Software Foundation, Inc.
> -
> -This file is part of GCC.
> -
> -GCC is free software; you can redistribute it and/or modify
> -it under the terms of the GNU General Public License as published by
> -the Free Software Foundation; either version 3, or (at your option)
> -any later version.
> -
> -GCC is distributed in the hope that it will be useful,
> -but WITHOUT ANY WARRANTY; without even the implied warranty of
> -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -GNU General Public License for more details.
> -
> -Under Section 7 of GPL version 3, you are granted additional
> -permissions described in the GCC Runtime Library Exception, version
> -3.1, as published by the Free Software Foundation.
> -
> -You should have received a copy of the GNU General Public License and
> -a copy of the GCC Runtime Library Exception along with this program;
> -see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
> -<http://www.gnu.org/licenses/>. */
> -
> -/* This file may be included by any ELF target which wishes to
> - support -gstabs generating stabs in sections, as produced by gas
> - and understood by gdb. */
> -
> -#ifndef GCC_DBX_ELF_H
> -#define GCC_DBX_ELF_H
> -
> -/* Output DBX (stabs) debugging information if doing -gstabs. */
> -
> -#define DBX_DEBUGGING_INFO 1
> -
> -/* Make LBRAC and RBRAC addresses relative to the start of the
> - function. The native Solaris stabs debugging format works this
> - way, gdb expects it, and it reduces the number of relocation
> - entries... */
> -
> -#define DBX_BLOCKS_FUNCTION_RELATIVE 1
> -
> -/* ... but, to make this work, functions must appear prior to line info. */
> -
> -#define DBX_FUNCTION_FIRST
> -
> -/* When generating stabs debugging, use N_BINCL entries. */
> -
> -#define DBX_USE_BINCL
> -
> -/* There is no limit to the length of stabs strings. */
> -
> -#ifndef DBX_CONTIN_LENGTH
> -#define DBX_CONTIN_LENGTH 0
> -#endif
> -
> -/* Like block addresses, stabs line numbers are relative to the
> - current function. */
> -
> -#define DBX_LINES_FUNCTION_RELATIVE 1
> -
> -/* Generate a blank trailing N_SO to mark the end of the .o file, since
> - we can't depend upon the linker to mark .o file boundaries with
> - embedded stabs. */
> -
> -#define DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
> -
> -#endif /* ! GCC_DBX_ELF_H */
> diff --git a/gcc/config/epiphany/epiphany.h b/gcc/config/epiphany/epiphany.h
> index 8c723845ae3..7c6a7f33df2 100644
> --- a/gcc/config/epiphany/epiphany.h
> +++ b/gcc/config/epiphany/epiphany.h
> @@ -795,14 +795,9 @@ do \
>
> /* Debugging information. */
>
> -/* Generate DBX and DWARF debugging information. */
> -#define DBX_DEBUGGING_INFO 1
> -
> +/* Generate DWARF debugging information. */
> #undef PREFERRED_DEBUGGING_TYPE
> #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
> -
> -/* Turn off splitting of long stabs. */
> -#define DBX_CONTIN_LENGTH 0
>
> /* Miscellaneous. */
>
> diff --git a/gcc/config/i386/bsd.h b/gcc/config/i386/bsd.h
> index d19ad2773f5..98d2810e975 100644
> --- a/gcc/config/i386/bsd.h
> +++ b/gcc/config/i386/bsd.h
> @@ -91,9 +91,3 @@ along with GCC; see the file COPYING3. If not see
> /* The prefix to add to user-visible assembler symbols. */
>
> #define USER_LABEL_PREFIX "_"
> -
> -/* Sequent has some changes in the format of DBX symbols. */
> -#define DBX_NO_XREFS 1
> -
> -/* Don't split DBX symbols into continuations. */
> -#define DBX_CONTIN_LENGTH 0
> diff --git a/gcc/config/i386/gas.h b/gcc/config/i386/gas.h
> index 3bac8eb6875..e0ffc75dc6d 100644
> --- a/gcc/config/i386/gas.h
> +++ b/gcc/config/i386/gas.h
> @@ -36,10 +36,6 @@ along with GCC; see the file COPYING3. If not see
> * people who want both form will have to compile twice.
> */
>
> -/* these come from i386/bsd.h, but are specific to sequent */
> -#undef DBX_NO_XREFS
> -#undef DBX_CONTIN_LENGTH
> -
> /* Output #ident as a .ident. */
>
> #undef TARGET_ASM_OUTPUT_IDENT
> diff --git a/gcc/config/ia64/ia64.h b/gcc/config/ia64/ia64.h
> index bd0ef35e9a4..69646625eae 100644
> --- a/gcc/config/ia64/ia64.h
> +++ b/gcc/config/ia64/ia64.h
> @@ -1426,8 +1426,6 @@ do { \
>
> /* Specific Options for DBX Output. */
>
> -/* This is handled by dbxelf.h. */
> -
>
> /* Open ended Hooks for DBX Output. */
>
> diff --git a/gcc/config/ia64/sysv4.h b/gcc/config/ia64/sysv4.h
> index 045752af012..046c5110195 100644
> --- a/gcc/config/ia64/sysv4.h
> +++ b/gcc/config/ia64/sysv4.h
> @@ -30,9 +30,6 @@ see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
> #undef PREFERRED_DEBUGGING_TYPE
> #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
>
> -/* Stabs does not work properly for 64-bit targets. */
> -#undef DBX_DEBUGGING_INFO
> -
> /* Various pseudo-ops for which the Intel assembler uses non-standard
> definitions. */
>
> diff --git a/gcc/config/m68k/linux.h b/gcc/config/m68k/linux.h
> index 05661bf355a..0c66c91f840 100644
> --- a/gcc/config/m68k/linux.h
> +++ b/gcc/config/m68k/linux.h
> @@ -146,10 +146,6 @@ along with GCC; see the file COPYING3. If not see
> fprintf (FILE, "\tjbsr _mcount\n"); \
> }
>
> -/* Do not break .stabs pseudos into continuations. */
> -
> -#define DBX_CONTIN_LENGTH 0
> -
> /* 1 if N is a possible register number for a function value. For
> m68k/SVR4 allow d0, a0, or fp0 as return registers, for integral,
> pointer, or floating types, respectively. Reject fp0 if not using
> diff --git a/gcc/config/m68k/openbsd.h b/gcc/config/m68k/openbsd.h
> index 63c57fdcc2c..ab998177de8 100644
> --- a/gcc/config/m68k/openbsd.h
> +++ b/gcc/config/m68k/openbsd.h
> @@ -60,18 +60,6 @@ along with GCC; see the file COPYING3. If not see
> /* Every structure or union's size must be a multiple of 2 bytes. */
> #define STRUCTURE_SIZE_BOUNDARY 16
>
> -/* Specific options for DBX Output. */
> -
> -/* This is BSD, so it wants DBX format. */
> -#define DBX_DEBUGGING_INFO 1
> -
> -/* Do not break .stabs pseudos into continuations. */
> -#define DBX_CONTIN_LENGTH 0
> -
> -/* This is the char to use for continuation (in case we need to turn
> - continuation back on). */
> -#define DBX_CONTIN_CHAR '?'
> -
> /* Stack & calling: aggregate returns. */
>
> /* ??? This is traditional, but quite possibly wrong. It appears to
> diff --git a/gcc/config/mips/mips.cc b/gcc/config/mips/mips.cc
> index e81a245dcf4..47724950c3e 100644
> --- a/gcc/config/mips/mips.cc
> +++ b/gcc/config/mips/mips.cc
> @@ -445,7 +445,6 @@ int num_source_filenames;
> const char *current_function_file = "";
>
> /* Arrays that map GCC register numbers to debugger register numbers. */
> -int mips_dbx_regno[FIRST_PSEUDO_REGISTER];
> int mips_dwarf_regno[FIRST_PSEUDO_REGISTER];
>
> /* Information about the current function's epilogue, used only while
> @@ -9595,10 +9594,6 @@ mips_output_filename (FILE *stream, const char *name)
> output_quoted_string (stream, name);
> putc ('\n', stream);
> }
> - /* If we are emitting stabs, let dbxout.cc handle this (except for
> - the mips_output_filename_first_time case). */
> - else if (write_symbols == DBX_DEBUG)
> - return;
> else if (name != current_function_file
> && strcmp (name, current_function_file) != 0)
> {
> @@ -20505,24 +20500,13 @@ mips_option_override (void)
>
> for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
> {
> - mips_dbx_regno[i] = IGNORED_DWARF_REGNUM;
> if (GP_REG_P (i) || FP_REG_P (i) || ALL_COP_REG_P (i))
> mips_dwarf_regno[i] = i;
> else
> mips_dwarf_regno[i] = INVALID_REGNUM;
> }
>
> - start = GP_DBX_FIRST - GP_REG_FIRST;
> - for (i = GP_REG_FIRST; i <= GP_REG_LAST; i++)
> - mips_dbx_regno[i] = i + start;
> -
> - start = FP_DBX_FIRST - FP_REG_FIRST;
> - for (i = FP_REG_FIRST; i <= FP_REG_LAST; i++)
> - mips_dbx_regno[i] = i + start;
> -
> /* Accumulator debug registers use big-endian ordering. */
> - mips_dbx_regno[HI_REGNUM] = MD_DBX_FIRST + 0;
> - mips_dbx_regno[LO_REGNUM] = MD_DBX_FIRST + 1;
> mips_dwarf_regno[HI_REGNUM] = MD_REG_FIRST + 0;
> mips_dwarf_regno[LO_REGNUM] = MD_REG_FIRST + 1;
> for (i = DSP_ACC_REG_FIRST; i <= DSP_ACC_REG_LAST; i += 2)
> diff --git a/gcc/config/mips/mips.h b/gcc/config/mips/mips.h
> index 0029864fdcd..85ea24c546e 100644
> --- a/gcc/config/mips/mips.h
> +++ b/gcc/config/mips/mips.h
> @@ -1384,9 +1384,7 @@ struct mips_cpu_info {
> #ifndef SUBTARGET_ASM_DEBUGGING_SPEC
> #define SUBTARGET_ASM_DEBUGGING_SPEC "\
> %{g} %{g0} %{g1} %{g2} %{g3} \
> -%{ggdb:-g} %{ggdb0:-g0} %{ggdb1:-g1} %{ggdb2:-g2} %{ggdb3:-g3} \
> -%{gstabs:-g} %{gstabs0:-g0} %{gstabs1:-g1} %{gstabs2:-g2} %{gstabs3:-g3} \
> -%{gstabs+:-g} %{gstabs+0:-g0} %{gstabs+1:-g1} %{gstabs+2:-g2} %{gstabs+3:-g3}"
> +%{ggdb:-g} %{ggdb0:-g0} %{ggdb1:-g1} %{ggdb2:-g2} %{ggdb3:-g3}"
> #endif
>
> /* FP_ASM_SPEC represents the floating-point options that must be passed
> @@ -1508,7 +1506,6 @@ FP_ASM_SPEC "\
> #define SUBTARGET_EXTRA_SPECS
> #endif
>
> -#define DBX_DEBUGGING_INFO 1 /* generate stabs (OSF/rose) */
> #define DWARF2_DEBUGGING_INFO 1 /* dwarf2 debugging info */
>
> #ifndef PREFERRED_DEBUGGING_TYPE
> @@ -1548,14 +1545,6 @@ FP_ASM_SPEC "\
> #define USER_LABEL_PREFIX ""
> #endif
>
> -/* On Sun 4, this limit is 2048. We use 1500 to be safe,
> - since the length can run past this up to a continuation point. */
> -#undef DBX_CONTIN_LENGTH
> -#define DBX_CONTIN_LENGTH 1500
> -
> -/* How to renumber registers for dbx and gdb. */
> -#define DBX_REGISTER_NUMBER(REGNO) mips_dbx_regno[REGNO]
> -
> /* The mapping from gcc register number to DWARF 2 CFA column number. */
> #define DWARF_FRAME_REGNUM(REGNO) mips_dwarf_regno[REGNO]
>
> @@ -1869,7 +1858,6 @@ FP_ASM_SPEC "\
> #define GP_REG_FIRST 0
> #define GP_REG_LAST 31
> #define GP_REG_NUM (GP_REG_LAST - GP_REG_FIRST + 1)
> -#define GP_DBX_FIRST 0
> #define K0_REG_NUM (GP_REG_FIRST + 26)
> #define K1_REG_NUM (GP_REG_FIRST + 27)
> #define KERNEL_REG_P(REGNO) (IN_RANGE (REGNO, K0_REG_NUM, K1_REG_NUM))
> @@ -1877,12 +1865,10 @@ FP_ASM_SPEC "\
> #define FP_REG_FIRST 32
> #define FP_REG_LAST 63
> #define FP_REG_NUM (FP_REG_LAST - FP_REG_FIRST + 1)
> -#define FP_DBX_FIRST ((write_symbols == DBX_DEBUG) ? 38 : 32)
>
> #define MD_REG_FIRST 64
> #define MD_REG_LAST 65
> #define MD_REG_NUM (MD_REG_LAST - MD_REG_FIRST + 1)
> -#define MD_DBX_FIRST (FP_DBX_FIRST + FP_REG_NUM)
>
> #define MSA_REG_FIRST FP_REG_FIRST
> #define MSA_REG_LAST FP_REG_LAST
> @@ -3221,7 +3207,6 @@ extern int num_source_filenames; /* current .file # */
> extern struct mips_asm_switch mips_noreorder;
> extern struct mips_asm_switch mips_nomacro;
> extern struct mips_asm_switch mips_noat;
> -extern int mips_dbx_regno[];
> extern int mips_dwarf_regno[];
> extern bool mips_split_p[];
> extern bool mips_split_hi_p[];
> diff --git a/gcc/config/nvptx/nvptx.cc b/gcc/config/nvptx/nvptx.cc
> index e4297e2d6c3..3634a49de3f 100644
> --- a/gcc/config/nvptx/nvptx.cc
> +++ b/gcc/config/nvptx/nvptx.cc
> @@ -52,7 +52,6 @@
> #include "tm-preds.h"
> #include "tm-constrs.h"
> #include "langhooks.h"
> -#include "dbxout.h"
> #include "cfgrtl.h"
> #include "gimple.h"
> #include "stor-layout.h"
> diff --git a/gcc/config/openbsd.h b/gcc/config/openbsd.h
> index 54be2225492..aa90ef734de 100644
> --- a/gcc/config/openbsd.h
> +++ b/gcc/config/openbsd.h
> @@ -150,17 +150,6 @@ while (0)
> #undef TARGET_LIBC_HAS_FUNCTION
> #define TARGET_LIBC_HAS_FUNCTION default_libc_has_function
>
> -
> -/* Runtime target specification. */
> -
> -/* Miscellaneous parameters. */
> -
> -/* Controlling debugging info: dbx options. */
> -
> -/* Don't use the `xsTAG;' construct in DBX output; OpenBSD systems that
> - use DBX don't support it. */
> -#define DBX_NO_XREFS
> -
>
> /* - we use . - _func instead of a local label,
> - we put extra spaces in expressions such as
> diff --git a/gcc/config/pa/pa-64.h b/gcc/config/pa/pa-64.h
> index bf505768ae2..5157b7f3053 100644
> --- a/gcc/config/pa/pa-64.h
> +++ b/gcc/config/pa/pa-64.h
> @@ -65,10 +65,6 @@ along with GCC; see the file COPYING3. If not see
> #undef LONG_DOUBLE_TYPE_SIZE
> #define LONG_DOUBLE_TYPE_SIZE 128
>
> -/* Temporary until we figure out what to do with those *(&@$ 32bit
> - relocs which appear in stabs. */
> -#undef DBX_DEBUGGING_INFO
> -
> /* ?!? This needs to be made compile-time selectable.
>
> The PA64 runtime model has arguments that grow to higher addresses
> diff --git a/gcc/config/pa/pa.h b/gcc/config/pa/pa.h
> index 92d3d1841a9..95787ab1df2 100644
> --- a/gcc/config/pa/pa.h
> +++ b/gcc/config/pa/pa.h
> @@ -130,8 +130,6 @@ extern unsigned long total_code_bytes;
> and the old mnemonics are dialect zero. */
> #define ASSEMBLER_DIALECT (TARGET_PA_20 ? 1 : 0)
>
> -/* Override some settings from dbxelf.h. */
> -
> /* We do not have to be compatible with dbx, so we enable gdb extensions
> by default. */
> #define DEFAULT_GDB_EXTENSIONS 1
> @@ -139,14 +137,6 @@ extern unsigned long total_code_bytes;
> /* Select dwarf2 as the preferred debug format. */
> #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
>
> -/* This used to be zero (no max length), but big enums and such can
> - cause huge strings which killed gas.
> -
> - We also have to avoid lossage in dbxout.cc -- it does not compute the
> - string size accurately, so we are real conservative here. */
> -#undef DBX_CONTIN_LENGTH
> -#define DBX_CONTIN_LENGTH 3000
> -
> /* GDB always assumes the current function's frame begins at the value
> of the stack pointer upon entry to the current function. Accessing
> local variables and parameters passed on the stack is done using the
> diff --git a/gcc/config/pa/som.h b/gcc/config/pa/som.h
> index d2510e9b90a..3efae0e1fa0 100644
> --- a/gcc/config/pa/som.h
> +++ b/gcc/config/pa/som.h
> @@ -21,21 +21,6 @@ along with GCC; see the file COPYING3. If not see
> #undef TARGET_SOM
> #define TARGET_SOM 1
>
> -/* With SOM we can only do STABS. */
> -#undef PREFERRED_DEBUGGING_TYPE
> -#define PREFERRED_DEBUGGING_TYPE DBX_DEBUG
> -
> -/* We do not use BINCL stabs in SOM.
> - ??? If it does not hurt, we probably should to avoid useless divergence
> - from other embedded stabs implementations. */
> -#undef DBX_USE_BINCL
> -
> -#define DBX_LINES_FUNCTION_RELATIVE 1
> -
> -/* gdb needs a null N_SO at the end of each file for scattered loading. */
> -
> -#define DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
> -
> /* HPUX has a program 'chatr' to list the dependencies of dynamically
> linked executables and shared libraries. */
> #define LDD_SUFFIX "chatr"
> diff --git a/gcc/config/pdp11/pdp11.cc b/gcc/config/pdp11/pdp11.cc
> index f7482df186b..380223439a4 100644
> --- a/gcc/config/pdp11/pdp11.cc
> +++ b/gcc/config/pdp11/pdp11.cc
> @@ -44,7 +44,6 @@ along with GCC; see the file COPYING3. If not see
> #include "calls.h"
> #include "expr.h"
> #include "builtins.h"
> -#include "dbxout.h"
> #include "explow.h"
> #include "expmed.h"
>
> diff --git a/gcc/config/pdp11/pdp11.h b/gcc/config/pdp11/pdp11.h
> index b7d66c3bc39..1fa52e8c754 100644
> --- a/gcc/config/pdp11/pdp11.h
> +++ b/gcc/config/pdp11/pdp11.h
> @@ -51,12 +51,6 @@ along with GCC; see the file COPYING3. If not see
>
>
> /* Generate DBX debugging information. */
> -
> -#define DBX_DEBUGGING_INFO
> -
> -#undef PREFERRED_DEBUGGING_TYPE
> -#define PREFERRED_DEBUGGING_TYPE DBX_DEBUG
> -
> #define TARGET_40_PLUS (TARGET_40 || TARGET_45)
> #define TARGET_10 (! TARGET_40_PLUS)
>
> @@ -489,9 +483,6 @@ extern int current_first_parm_offset;
> /* Nonzero if access to memory by byte is no faster than by word. */
> #define SLOW_BYTE_ACCESS 1
>
> -/* Do not break .stabs pseudos into continuations. */
> -#define DBX_CONTIN_LENGTH 0
> -
> /* Give a comparison code (EQ, NE etc) and the first operand of a COMPARE,
> return the mode to be used for the comparison. */
>
> diff --git a/gcc/config/rs6000/rs6000-builtin.cc b/gcc/config/rs6000/rs6000-builtin.cc
> index e6948b9abb7..65b950d4458 100644
> --- a/gcc/config/rs6000/rs6000-builtin.cc
> +++ b/gcc/config/rs6000/rs6000-builtin.cc
> @@ -51,9 +51,6 @@
> #include "tree-ssa-propagate.h"
> #include "builtins.h"
> #include "tree-vector-builder.h"
> -#if TARGET_XCOFF
> -#include "xcoffout.h" /* get declarations of xcoff_*_section_name */
> -#endif
> #include "ppc-auxv.h"
> #include "rs6000-internal.h"
>
> diff --git a/gcc/config/rs6000/rs6000-call.cc b/gcc/config/rs6000/rs6000-call.cc
> index 551968b0995..ac3cb7e3d36 100644
> --- a/gcc/config/rs6000/rs6000-call.cc
> +++ b/gcc/config/rs6000/rs6000-call.cc
> @@ -61,20 +61,12 @@
> #include "tree-ssa-propagate.h"
> #include "builtins.h"
> #include "tree-vector-builder.h"
> -#if TARGET_XCOFF
> -#include "xcoffout.h" /* get declarations of xcoff_*_section_name */
> -#endif
> #include "ppc-auxv.h"
> #include "targhooks.h"
> #include "opts.h"
>
> #include "rs6000-internal.h"
>
> -#if TARGET_MACHO
> -#include "gstab.h" /* for N_SLINE */
> -#include "dbxout.h" /* dbxout_ */
> -#endif
> -
> #ifndef TARGET_PROFILE_KERNEL
> #define TARGET_PROFILE_KERNEL 0
> #endif
> diff --git a/gcc/config/rs6000/rs6000-logue.cc b/gcc/config/rs6000/rs6000-logue.cc
> index 59fe1c8cb8b..ddd849ebaf7 100644
> --- a/gcc/config/rs6000/rs6000-logue.cc
> +++ b/gcc/config/rs6000/rs6000-logue.cc
> @@ -47,10 +47,6 @@
> #include "diagnostic-core.h"
> #include "alias.h"
> #include "rs6000-internal.h"
> -#if TARGET_MACHO
> -#include "gstab.h" /* for N_SLINE */
> -#include "dbxout.h" /* dbxout_ */
> -#endif
>
> static int rs6000_ra_ever_killed (void);
> static void is_altivec_return_reg (rtx, void *);
> @@ -5144,10 +5140,6 @@ macho_branch_islands (void)
> }
> strcpy (tmp_buf, "\n");
> strcat (tmp_buf, label);
> -#if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)
> - if (write_symbols == DBX_DEBUG || write_symbols == XCOFF_DEBUG)
> - dbxout_stabd (N_SLINE, bi->line_number);
> -#endif /* DBX_DEBUGGING_INFO || XCOFF_DEBUGGING_INFO */
> if (flag_pic)
> {
> strcat (tmp_buf, ":\n\tmflr r0\n\tbcl 20,31,");
> @@ -5181,10 +5173,6 @@ macho_branch_islands (void)
> strcat (tmp_buf, ")\n\tmtctr r12\n\tbctr");
> }
> output_asm_insn (tmp_buf, 0);
> -#if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)
> - if (write_symbols == DBX_DEBUG || write_symbols == XCOFF_DEBUG)
> - dbxout_stabd (N_SLINE, bi->line_number);
> -#endif /* DBX_DEBUGGING_INFO || XCOFF_DEBUGGING_INFO */
> branch_islands->pop ();
> }
> }
> diff --git a/gcc/config/rs6000/rs6000.cc b/gcc/config/rs6000/rs6000.cc
> index 2f3146e56f8..679d9c2c2bd 100644
> --- a/gcc/config/rs6000/rs6000.cc
> +++ b/gcc/config/rs6000/rs6000.cc
> @@ -75,9 +75,6 @@
> #include "ipa-prop.h"
> #include "ipa-fnsummary.h"
> #include "except.h"
> -#if TARGET_XCOFF
> -#include "xcoffout.h" /* get declarations of xcoff_*_section_name */
> -#endif
> #include "case-cfn-macros.h"
> #include "ppc-auxv.h"
> #include "rs6000-internal.h"
> @@ -3824,12 +3821,6 @@ rs6000_option_override_internal (bool global_init_p)
> if (TARGET_DEBUG_REG || TARGET_DEBUG_TARGET)
> rs6000_print_isa_options (stderr, 0, "before defaults", rs6000_isa_flags);
>
> -#ifdef XCOFF_DEBUGGING_INFO
> - /* For AIX default to 64-bit DWARF. */
> - if (!OPTION_SET_P (dwarf_offset_size))
> - dwarf_offset_size = POINTER_SIZE_UNITS;
> -#endif
> -
> /* Handle explicit -mno-{altivec,vsx,power8-vector,power9-vector} and turn
> off all of the options that depend on those flags. */
> ignore_masks = rs6000_disable_incompatible_switches ();
> @@ -20949,9 +20940,14 @@ rs6000_elf_file_end (void)
>
> #if TARGET_XCOFF
>
> -#ifndef HAVE_XCOFF_DWARF_EXTRAS
> -#define HAVE_XCOFF_DWARF_EXTRAS 0
> -#endif
> +/* Names of bss and data sections. These should be unique names for each
> + compilation unit. */
> +
> +char *xcoff_bss_section_name;
> +char *xcoff_private_data_section_name;
> +char *xcoff_private_rodata_section_name;
> +char *xcoff_tls_data_section_name;
> +char *xcoff_read_only_section_name;
>
> static enum unwind_info_type
> rs6000_xcoff_debug_unwind_info (void)
> @@ -21466,9 +21462,7 @@ rs6000_xcoff_declare_function_name (FILE *file, const char *name, tree decl)
> &data, true);
> if (!DECL_IGNORED_P (decl))
> {
> - if (write_symbols == DBX_DEBUG || write_symbols == XCOFF_DEBUG)
> - xcoffout_declare_function (file, decl, buffer);
> - else if (dwarf_debuginfo_p ())
> + if (dwarf_debuginfo_p ())
> {
> name = (*targetm.strip_name_encoding) (name);
> fprintf (file, "\t.function .%s,.%s,2,0\n", name, name);
> diff --git a/gcc/config/rs6000/sysv4.h b/gcc/config/rs6000/sysv4.h
> index 7e2519de5d4..c8b7eb63317 100644
> --- a/gcc/config/rs6000/sysv4.h
> +++ b/gcc/config/rs6000/sysv4.h
> @@ -504,9 +504,6 @@ extern int fixuplabelno;
> #undef PREFERRED_DEBUGGING_TYPE
> #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
>
> -/* Historically we have also supported stabs debugging. */
> -#define DBX_DEBUGGING_INFO 1
> -
> #define TARGET_ENCODE_SECTION_INFO rs6000_elf_encode_section_info
> #define TARGET_IN_SMALL_DATA_P rs6000_elf_in_small_data_p
>
> @@ -515,11 +512,6 @@ extern int fixuplabelno;
> #define RS6000_OUTPUT_BASENAME(FILE, NAME) \
> assemble_name (FILE, NAME)
>
> -/* We have to output the stabs for the function name *first*, before
> - outputting its label. */
> -
> -#define DBX_FUNCTION_FIRST
> -
> /* This is the end of what might become sysv4dbx.h. */
>
> #define TARGET_OS_SYSV_CPP_BUILTINS() \
> diff --git a/gcc/config/rs6000/xcoff.h b/gcc/config/rs6000/xcoff.h
> index cd0f99cb9c6..bafc57df59a 100644
> --- a/gcc/config/rs6000/xcoff.h
> +++ b/gcc/config/rs6000/xcoff.h
> @@ -21,9 +21,6 @@
>
> #define TARGET_OBJECT_FORMAT OBJECT_XCOFF
>
> -/* The RS/6000 uses the XCOFF format. */
> -#define XCOFF_DEBUGGING_INFO 1
> -
> /* Define if the object format being used is COFF or a superset. */
> #define OBJECT_FORMAT_COFF
>
> diff --git a/gcc/config/rx/rx.h b/gcc/config/rx/rx.h
> index ce9c2ff1278..77f84039cb1 100644
> --- a/gcc/config/rx/rx.h
> +++ b/gcc/config/rx/rx.h
> @@ -623,7 +623,6 @@ typedef unsigned int CUMULATIVE_ARGS;
> #undef PREFERRED_DEBUGGING_TYPE
> #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
>
> -#define DBX_DEBUGGING_INFO 1
> #define DWARF2_DEBUGGING_INFO 1
>
> #define INCOMING_FRAME_SP_OFFSET 4
> diff --git a/gcc/config/sh/elf.h b/gcc/config/sh/elf.h
> index afb3bc353cc..f0fd19f8854 100644
> --- a/gcc/config/sh/elf.h
> +++ b/gcc/config/sh/elf.h
> @@ -67,9 +67,6 @@ along with GCC; see the file COPYING3. If not see
> #define ASM_GENERATE_INTERNAL_LABEL(STRING, PREFIX, NUM) \
> sprintf ((STRING), "*%s%s%ld", LOCAL_LABEL_PREFIX, (PREFIX), (long)(NUM))
>
> -#define DBX_LINES_FUNCTION_RELATIVE 1
> -#define DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
> -
> #undef STARTFILE_SPEC
> #define STARTFILE_SPEC \
> "%{!shared: crt1.o%s} crti.o%s \
> diff --git a/gcc/config/sol2.h b/gcc/config/sol2.h
> index e22c70c45ae..fc703308284 100644
> --- a/gcc/config/sol2.h
> +++ b/gcc/config/sol2.h
> @@ -498,11 +498,7 @@ along with GCC; see the file COPYING3. If not see
>
> #define AS_NEEDS_DASH_FOR_PIPED_INPUT
>
> -/* The Solaris assembler cannot grok .stabd directives. */
> -#undef NO_DBX_BNSYM_ENSYM
> -#define NO_DBX_BNSYM_ENSYM 1
> #endif
> -
> /* Solaris has an implementation of __enable_execute_stack. */
> #define HAVE_ENABLE_EXECUTE_STACK
>
> diff --git a/gcc/config/sparc/freebsd.h b/gcc/config/sparc/freebsd.h
> index 98319c52875..73850a31f58 100644
> --- a/gcc/config/sparc/freebsd.h
> +++ b/gcc/config/sparc/freebsd.h
> @@ -109,12 +109,6 @@ along with GCC; see the file COPYING3. If not see
>
> /************************[ Debugger stuff ]*********************************/
>
> -/* This is the char to use for continuation (in case we need to turn
> - continuation back on). */
> -
> -#undef DBX_CONTIN_CHAR
> -#define DBX_CONTIN_CHAR '?'
> -
> /* DWARF bits. */
>
> /* Follow Irix 6 and not the Dwarf2 draft in using 64-bit offsets.
> diff --git a/gcc/config/sparc/netbsd-elf.h b/gcc/config/sparc/netbsd-elf.h
> index af194df3ed3..bee71fc1839 100644
> --- a/gcc/config/sparc/netbsd-elf.h
> +++ b/gcc/config/sparc/netbsd-elf.h
> @@ -46,11 +46,6 @@ along with GCC; see the file COPYING3. If not see
> #undef PTRDIFF_TYPE
> #define PTRDIFF_TYPE "long int"
>
> -/* This is the char to use for continuation (in case we need to turn
> - continuation back on). */
> -#undef DBX_CONTIN_CHAR
> -#define DBX_CONTIN_CHAR '?'
> -
> #undef LOCAL_LABEL_PREFIX
> #define LOCAL_LABEL_PREFIX "."
>
> diff --git a/gcc/config/sparc/sparc.h b/gcc/config/sparc/sparc.h
> index 2e17fca197a..987340392dd 100644
> --- a/gcc/config/sparc/sparc.h
> +++ b/gcc/config/sparc/sparc.h
> @@ -1510,14 +1510,6 @@ do { \
> #define ADDITIONAL_REGISTER_NAMES \
> {{"ccr", SPARC_ICC_REG}, {"cc", SPARC_ICC_REG}}
>
> -/* On Sun 4, this limit is 2048. We use 1000 to be safe, since the length
> - can run past this up to a continuation point. Once we used 1500, but
> - a single entry in C++ can run more than 500 bytes, due to the length of
> - mangled symbol names. dbxout.cc should really be fixed to do
> - continuations when they are actually needed instead of trying to
> - guess... */
> -#define DBX_CONTIN_LENGTH 1000
> -
> /* This is how to output a command to make the user-level label named NAME
> defined for reference from other files. */
>
> diff --git a/gcc/config/vax/vax.cc b/gcc/config/vax/vax.cc
> index f44e23d1796..28c1af59a99 100644
> --- a/gcc/config/vax/vax.cc
> +++ b/gcc/config/vax/vax.cc
> @@ -247,9 +247,6 @@ static void
> vax_file_start (void)
> {
> default_file_start ();
> -
> - if (write_symbols == DBX_DEBUG)
> - fprintf (asm_out_file, "___vax_%c_doubles:\n", ASM_DOUBLE_CHAR);
> }
>
> /* We can use the BSD C library routines for the libgcc calls that are
> diff --git a/gcc/config/vax/vax.h b/gcc/config/vax/vax.h
> index 45c0e75634e..12c51e53db6 100644
> --- a/gcc/config/vax/vax.h
> +++ b/gcc/config/vax/vax.h
> @@ -508,27 +508,6 @@ enum reg_class { NO_REGS, ALL_REGS, LIM_REG_CLASSES };
> "r8", "r9", "r10", "r11", "ap", "fp", "sp", "pc", \
> "psl" }
>
> -/* This is BSD, so it wants DBX format. */
> -
> -#define DBX_DEBUGGING_INFO 1
> -
> -/* Do not break .stabs pseudos into continuations. */
> -
> -#define DBX_CONTIN_LENGTH 0
> -
> -/* This is the char to use for continuation (in case we need to turn
> - continuation back on). */
> -
> -#define DBX_CONTIN_CHAR '?'
> -
> -/* Don't use the `xsfoo;' construct in DBX output; this system
> - doesn't support it. */
> -
> -#define DBX_NO_XREFS
> -
> -/* Output the .stabs for a C `static' variable in the data section. */
> -#define DBX_STATIC_STAB_DATA_SECTION
> -
> /* VAX specific: which type character is used for type double? */
>
> #define ASM_DOUBLE_CHAR (TARGET_G_FLOAT ? 'g' : 'd')
> diff --git a/gcc/config/vx-common.h b/gcc/config/vx-common.h
> index aaae4f78b45..bc27684375a 100644
> --- a/gcc/config/vx-common.h
> +++ b/gcc/config/vx-common.h
> @@ -94,8 +94,6 @@ along with GCC; see the file COPYING3. If not see
> #define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
>
> /* None of these other formats is supported. */
> -#undef DBX_DEBUGGING_INFO
> -#undef XCOFF_DEBUGGING_INFO
> #undef VMS_DEBUGGING_INFO
>
> /* ------------------------ Misc configuration bits ---------------------- */
> diff --git a/gcc/configure b/gcc/configure
> index acd712f6715..2fd6b531862 100755
> --- a/gcc/configure
> +++ b/gcc/configure
> @@ -25098,38 +25098,6 @@ cat >>confdefs.h <<_ACEOF
> _ACEOF
>
>
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for stabs directive" >&5
> -$as_echo_n "checking assembler for stabs directive... " >&6; }
> -if ${gcc_cv_as_stabs_directive+:} false; then :
> - $as_echo_n "(cached) " >&6
> -else
> - gcc_cv_as_stabs_directive=no
> - if test x$gcc_cv_as != x; then
> - $as_echo '.stabs "gcc2_compiled.",60,0,0,0' > conftest.s
> - if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
> - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
> - (eval $ac_try) 2>&5
> - ac_status=$?
> - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> - test $ac_status = 0; }; }
> - then
> - gcc_cv_as_stabs_directive=yes
> - else
> - echo "configure: failed program was" >&5
> - cat conftest.s >&5
> - fi
> - rm -f conftest.o conftest.s
> - fi
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_stabs_directive" >&5
> -$as_echo "$gcc_cv_as_stabs_directive" >&6; }
> -if test $gcc_cv_as_stabs_directive = yes; then
> -
> -$as_echo "#define HAVE_AS_STABS_DIRECTIVE 1" >>confdefs.h
> -
> -fi
> -
> -
> { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for COMDAT group support (GNU as)" >&5
> $as_echo_n "checking assembler for COMDAT group support (GNU as)... " >&6; }
> if ${gcc_cv_as_comdat_group+:} false; then :
> @@ -28179,41 +28147,6 @@ if test $gcc_cv_as_aix_ref = yes; then
>
> $as_echo "#define HAVE_AS_REF 1" >>confdefs.h
>
> -fi
> -
> -
> - { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for AIX DWARF location lists section support" >&5
> -$as_echo_n "checking assembler for AIX DWARF location lists section support... " >&6; }
> -if ${gcc_cv_as_aix_dwloc+:} false; then :
> - $as_echo_n "(cached) " >&6
> -else
> - gcc_cv_as_aix_dwloc=no
> - if test x$gcc_cv_as != x; then
> - $as_echo ' .dwsect 0xA0000
> - Lframe..0:
> - .vbyte 4,Lframe..0
> - ' > conftest.s
> - if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
> - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
> - (eval $ac_try) 2>&5
> - ac_status=$?
> - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> - test $ac_status = 0; }; }
> - then
> - gcc_cv_as_aix_dwloc=yes
> - else
> - echo "configure: failed program was" >&5
> - cat conftest.s >&5
> - fi
> - rm -f conftest.o conftest.s
> - fi
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_aix_dwloc" >&5
> -$as_echo "$gcc_cv_as_aix_dwloc" >&6; }
> -if test $gcc_cv_as_aix_dwloc = yes; then
> -
> -$as_echo "#define HAVE_XCOFF_DWARF_EXTRAS 1" >>confdefs.h
> -
> fi
>
> ;;
> @@ -29711,38 +29644,6 @@ $as_echo "#define HAVE_AS_WORKING_DWARF_N_FLAG 1" >>confdefs.h
> fi
> fi
>
> - { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for --gstabs option" >&5
> -$as_echo_n "checking assembler for --gstabs option... " >&6; }
> -if ${gcc_cv_as_gstabs_flag+:} false; then :
> - $as_echo_n "(cached) " >&6
> -else
> - gcc_cv_as_gstabs_flag=no
> - if test x$gcc_cv_as != x; then
> - $as_echo "$insn" > conftest.s
> - if { ac_try='$gcc_cv_as $gcc_cv_as_flags --gstabs -o conftest.o conftest.s >&5'
> - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
> - (eval $ac_try) 2>&5
> - ac_status=$?
> - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> - test $ac_status = 0; }; }
> - then
> - gcc_cv_as_gstabs_flag=yes
> - else
> - echo "configure: failed program was" >&5
> - cat conftest.s >&5
> - fi
> - rm -f conftest.o conftest.s
> - fi
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_gstabs_flag" >&5
> -$as_echo "$gcc_cv_as_gstabs_flag" >&6; }
> -if test $gcc_cv_as_gstabs_flag = yes; then
> -
> -$as_echo "#define HAVE_AS_GSTABS_DEBUG_FLAG 1" >>confdefs.h
> -
> -fi
> -
> -
> { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for --debug-prefix-map option" >&5
> $as_echo_n "checking assembler for --debug-prefix-map option... " >&6; }
> if ${gcc_cv_as_debug_prefix_map_flag+:} false; then :
> diff --git a/gcc/configure.ac b/gcc/configure.ac
> index 73f3f12017c..12b5e934d1e 100644
> --- a/gcc/configure.ac
> +++ b/gcc/configure.ac
> @@ -3512,11 +3512,6 @@ AC_DEFINE_UNQUOTED(HAVE_LD_ALIGNED_SHF_MERGE,
> [`if test $gcc_cv_ld_aligned_shf_merge = yes; then echo 1; else echo 0; fi`],
> [Define 0/1 if your linker supports the SHF_MERGE flag with section alignment > 1.])
>
> -gcc_GAS_CHECK_FEATURE([stabs directive], gcc_cv_as_stabs_directive,,
> -[.stabs "gcc2_compiled.",60,0,0,0],,
> -[AC_DEFINE(HAVE_AS_STABS_DIRECTIVE, 1,
> - [Define if your assembler supports .stabs.])])
> -
> gcc_GAS_CHECK_FEATURE([COMDAT group support (GNU as)],
> gcc_cv_as_comdat_group,
> [--fatal-warnings],
> @@ -5076,15 +5071,6 @@ LCF0:
> ],,
> [AC_DEFINE(HAVE_AS_REF, 1,
> [Define if your assembler supports .ref])])
> -
> - gcc_GAS_CHECK_FEATURE([AIX DWARF location lists section support],
> - gcc_cv_as_aix_dwloc,,
> - [ .dwsect 0xA0000
> - Lframe..0:
> - .vbyte 4,Lframe..0
> - ],,
> - [AC_DEFINE(HAVE_XCOFF_DWARF_EXTRAS, 1,
> - [Define if your assembler supports AIX debug frame section label reference.])])
> ;;
> esac
> ;;
> @@ -5728,12 +5714,6 @@ foo:
> fi
> fi
>
> - gcc_GAS_CHECK_FEATURE([--gstabs option],
> - gcc_cv_as_gstabs_flag,
> - [--gstabs], [$insn],,
> - [AC_DEFINE(HAVE_AS_GSTABS_DEBUG_FLAG, 1,
> -[Define if your assembler supports the --gstabs option.])])
> -
> gcc_GAS_CHECK_FEATURE([--debug-prefix-map option],
> gcc_cv_as_debug_prefix_map_flag,
> [--debug-prefix-map /a=/b], [$insn],,
> diff --git a/gcc/dbxout.cc b/gcc/dbxout.cc
> deleted file mode 100644
> index 878d528dc9a..00000000000
> --- a/gcc/dbxout.cc
> +++ /dev/null
> @@ -1,3936 +0,0 @@
> -/* Output dbx-format symbol table information from GNU compiler.
> - Copyright (C) 1987-2022 Free Software Foundation, Inc.
> -
> -This file is part of GCC.
> -
> -GCC is free software; you can redistribute it and/or modify it under
> -the terms of the GNU General Public License as published by the Free
> -Software Foundation; either version 3, or (at your option) any later
> -version.
> -
> -GCC is distributed in the hope that it will be useful, but WITHOUT ANY
> -WARRANTY; without even the implied warranty of MERCHANTABILITY or
> -FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> -for more details.
> -
> -You should have received a copy of the GNU General Public License
> -along with GCC; see the file COPYING3. If not see
> -<http://www.gnu.org/licenses/>. */
> -
> -
> -/* Output dbx-format symbol table data.
> - This consists of many symbol table entries, each of them
> - a .stabs assembler pseudo-op with four operands:
> - a "name" which is really a description of one symbol and its type,
> - a "code", which is a symbol defined in stab.h whose name starts with N_,
> - an unused operand always 0,
> - and a "value" which is an address or an offset.
> - The name is enclosed in doublequote characters.
> -
> - Each function, variable, typedef, and structure tag
> - has a symbol table entry to define it.
> - The beginning and end of each level of name scoping within
> - a function are also marked by special symbol table entries.
> -
> - The "name" consists of the symbol name, a colon, a kind-of-symbol letter,
> - and a data type number. The data type number may be followed by
> - "=" and a type definition; normally this will happen the first time
> - the type number is mentioned. The type definition may refer to
> - other types by number, and those type numbers may be followed
> - by "=" and nested definitions.
> -
> - This can make the "name" quite long.
> - When a name is more than 80 characters, we split the .stabs pseudo-op
> - into two .stabs pseudo-ops, both sharing the same "code" and "value".
> - The first one is marked as continued with a double-backslash at the
> - end of its "name".
> -
> - The kind-of-symbol letter distinguished function names from global
> - variables from file-scope variables from parameters from auto
> - variables in memory from typedef names from register variables.
> - See `dbxout_symbol'.
> -
> - The "code" is mostly redundant with the kind-of-symbol letter
> - that goes in the "name", but not entirely: for symbols located
> - in static storage, the "code" says which segment the address is in,
> - which controls how it is relocated.
> -
> - The "value" for a symbol in static storage
> - is the core address of the symbol (actually, the assembler
> - label for the symbol). For a symbol located in a stack slot
> - it is the stack offset; for one in a register, the register number.
> - For a typedef symbol, it is zero.
> -
> - If DEBUG_SYMS_TEXT is defined, all debugging symbols must be
> - output while in the text section.
> -
> - For more on data type definitions, see `dbxout_type'. */
> -
> -#include "config.h"
> -#include "system.h"
> -#include "coretypes.h"
> -#include "target.h"
> -#include "function.h"
> -#include "rtl.h"
> -#include "tree.h"
> -#include "memmodel.h"
> -#include "tm_p.h"
> -#include "stringpool.h"
> -#include "insn-config.h"
> -#include "emit-rtl.h"
> -#include "cgraph.h"
> -#include "diagnostic-core.h"
> -#include "fold-const.h"
> -#include "varasm.h"
> -#include "stor-layout.h"
> -#include "reload.h"
> -#include "output.h"
> -#include "dbxout.h"
> -#include "toplev.h"
> -#include "debug.h"
> -#include "common/common-target.h"
> -#include "langhooks.h"
> -#include "expr.h"
> -#include "file-prefix-map.h" /* remap_debug_filename() */
> -#include "flags.h"
> -
> -#ifdef XCOFF_DEBUGGING_INFO
> -#include "xcoffout.h"
> -#endif
> -
> -#ifndef ASM_STABS_OP
> -# ifdef XCOFF_DEBUGGING_INFO
> -# define ASM_STABS_OP "\t.stabx\t"
> -# else
> -# define ASM_STABS_OP "\t.stabs\t"
> -# endif
> -#endif
> -
> -#ifndef ASM_STABN_OP
> -#define ASM_STABN_OP "\t.stabn\t"
> -#endif
> -
> -#ifndef ASM_STABD_OP
> -#define ASM_STABD_OP "\t.stabd\t"
> -#endif
> -
> -#ifndef DBX_TYPE_DECL_STABS_CODE
> -#define DBX_TYPE_DECL_STABS_CODE N_LSYM
> -#endif
> -
> -#ifndef DBX_STATIC_CONST_VAR_CODE
> -#define DBX_STATIC_CONST_VAR_CODE N_FUN
> -#endif
> -
> -#ifndef DBX_REGPARM_STABS_CODE
> -#define DBX_REGPARM_STABS_CODE N_RSYM
> -#endif
> -
> -#ifndef DBX_REGPARM_STABS_LETTER
> -#define DBX_REGPARM_STABS_LETTER 'P'
> -#endif
> -
> -#ifndef NO_DBX_FUNCTION_END
> -#define NO_DBX_FUNCTION_END 0
> -#endif
> -
> -#ifndef NO_DBX_BNSYM_ENSYM
> -#define NO_DBX_BNSYM_ENSYM 0
> -#endif
> -
> -#ifndef NO_DBX_MAIN_SOURCE_DIRECTORY
> -#define NO_DBX_MAIN_SOURCE_DIRECTORY 0
> -#endif
> -
> -#ifndef DBX_BLOCKS_FUNCTION_RELATIVE
> -#define DBX_BLOCKS_FUNCTION_RELATIVE 0
> -#endif
> -
> -#ifndef DBX_LINES_FUNCTION_RELATIVE
> -#define DBX_LINES_FUNCTION_RELATIVE 0
> -#endif
> -
> -#ifndef DBX_CONTIN_LENGTH
> -#define DBX_CONTIN_LENGTH 80
> -#endif
> -
> -#ifndef DBX_CONTIN_CHAR
> -#define DBX_CONTIN_CHAR '\\'
> -#endif
> -
> -enum typestatus {TYPE_UNSEEN, TYPE_XREF, TYPE_DEFINED};
> -
> -/* Structure recording information about a C data type.
> - The status element says whether we have yet output
> - the definition of the type. TYPE_XREF says we have
> - output it as a cross-reference only.
> - The file_number and type_number elements are used if DBX_USE_BINCL
> - is defined. */
> -
> -struct GTY(()) typeinfo {
> - enum typestatus status;
> - int file_number;
> - int type_number;
> -};
> -
> -/* Vector recording information about C data types.
> - When we first notice a data type (a tree node),
> - we assign it a number using next_type_number.
> - That is its index in this vector. */
> -
> -static GTY ((length ("typevec_len"))) struct typeinfo *typevec;
> -
> -/* Number of elements of space allocated in `typevec'. */
> -
> -static GTY(()) int typevec_len;
> -
> -/* In dbx output, each type gets a unique number.
> - This is the number for the next type output.
> - The number, once assigned, is in the TYPE_SYMTAB_ADDRESS field. */
> -
> -static GTY(()) int next_type_number;
> -
> -/* The C front end may call dbxout_symbol before dbxout_init runs.
> - We save all such decls in this list and output them when we get
> - to dbxout_init. */
> -
> -static GTY(()) tree preinit_symbols;
> -
> -enum binclstatus {BINCL_NOT_REQUIRED, BINCL_PENDING, BINCL_PROCESSED};
> -
> -/* When using N_BINCL in dbx output, each type number is actually a
> - pair of the file number and the type number within the file.
> - This is a stack of input files. */
> -
> -struct dbx_file
> -{
> - struct dbx_file *next;
> - int file_number;
> - int next_type_number;
> - enum binclstatus bincl_status; /* Keep track of lazy bincl. */
> - const char *pending_bincl_name; /* Name of bincl. */
> - struct dbx_file *prev; /* Chain to traverse all pending bincls. */
> -};
> -
> -/* This is the top of the stack.
> -
> - This is not saved for PCH, because restoring a PCH should not change it.
> - next_file_number does have to be saved, because the PCH may use some
> - file numbers; however, just before restoring a PCH, next_file_number
> - should always be 0 because we should not have needed any file numbers
> - yet. */
> -
> -#if (defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)) \
> - && defined (DBX_USE_BINCL)
> -static struct dbx_file *current_file;
> -#endif
> -
> -/* This is the next file number to use. */
> -
> -static GTY(()) int next_file_number;
> -
> -/* A counter for dbxout_function_end. */
> -
> -static GTY(()) int scope_labelno;
> -
> -/* A counter for dbxout_source_line. */
> -
> -static GTY(()) int dbxout_source_line_counter;
> -
> -/* Number for the next N_SOL filename stabs label. The number 0 is reserved
> - for the N_SO filename stabs label. */
> -
> -static GTY(()) int source_label_number = 1;
> -
> -/* Last source file name mentioned in a NOTE insn. */
> -
> -static GTY(()) const char *lastfile;
> -
> -/* Last line number mentioned in a NOTE insn. */
> -
> -static GTY(()) unsigned int lastlineno;
> -
> -/* Used by PCH machinery to detect if 'lastfile' should be reset to
> - base_input_file. */
> -static GTY(()) int lastfile_is_base;
> -
> -/* Typical USG systems don't have stab.h, and they also have
> - no use for DBX-format debugging info. */
> -
> -#if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)
> -
> -#ifdef DBX_USE_BINCL
> -/* If zero then there is no pending BINCL. */
> -static int pending_bincls = 0;
> -#endif
> -
> -/* The original input file name. */
> -static const char *base_input_file;
> -
> -#ifdef DEBUG_SYMS_TEXT
> -#define FORCE_TEXT switch_to_section (current_function_section ())
> -#else
> -#define FORCE_TEXT
> -#endif
> -
> -#include "gstab.h"
> -
> -/* 1 if PARM is passed to this function in memory. */
> -
> -#define PARM_PASSED_IN_MEMORY(PARM) \
> - (MEM_P (DECL_INCOMING_RTL (PARM)))
> -
> -/* A C expression for the integer offset value of an automatic variable
> - (N_LSYM) having address X (an RTX). */
> -#ifndef DEBUGGER_AUTO_OFFSET
> -#define DEBUGGER_AUTO_OFFSET(X) \
> - (GET_CODE (X) == PLUS ? INTVAL (XEXP (X, 1)) : 0)
> -#endif
> -
> -/* A C expression for the integer offset value of an argument (N_PSYM)
> - having address X (an RTX). The nominal offset is OFFSET.
> - Note that we use OFFSET + 0 here to avoid the self-assign warning
> - when the macro is called in a context like
> - number = DEBUGGER_ARG_OFFSET(number, X) */
> -#ifndef DEBUGGER_ARG_OFFSET
> -#define DEBUGGER_ARG_OFFSET(OFFSET, X) (OFFSET + 0)
> -#endif
> -
> -/* This obstack holds the stab string currently being constructed. We
> - build it up here, then write it out, so we can split long lines up
> - properly (see dbxout_finish_complex_stabs). */
> -static struct obstack stabstr_ob;
> -static size_t stabstr_last_contin_point;
> -
> -#ifdef DBX_USE_BINCL
> -static void emit_bincl_stab (const char *c);
> -static void emit_pending_bincls (void);
> -#endif
> -static inline void emit_pending_bincls_if_required (void);
> -
> -static void dbxout_init (const char *);
> -
> -static void dbxout_finish (const char *);
> -static void dbxout_start_source_file (unsigned, const char *);
> -static void dbxout_end_source_file (unsigned);
> -static void dbxout_typedefs (tree);
> -static void dbxout_type_index (tree);
> -static void dbxout_args (tree);
> -static void dbxout_type_fields (tree);
> -static void dbxout_type_method_1 (tree);
> -static void dbxout_type_methods (tree);
> -static void dbxout_range_type (tree, tree, tree);
> -static void dbxout_type (tree, int);
> -static bool print_int_cst_bounds_in_octal_p (tree, tree, tree);
> -static bool is_fortran (void);
> -static void dbxout_type_name (tree);
> -static void dbxout_class_name_qualifiers (tree);
> -static int dbxout_symbol_location (tree, tree, const char *, rtx);
> -static void dbxout_symbol_name (tree, const char *, int);
> -static void dbxout_common_name (tree, const char *, stab_code_type);
> -static const char *dbxout_common_check (tree, int *);
> -static void dbxout_early_global_decl (tree);
> -static void dbxout_late_global_decl (tree);
> -static void dbxout_type_decl (tree, int);
> -static void dbxout_handle_pch (unsigned);
> -static void debug_free_queue (void);
> -
> -/* The debug hooks structure. */
> -#if defined (DBX_DEBUGGING_INFO)
> -
> -static void dbxout_source_line (unsigned int, unsigned int, const char *,
> - int, bool);
> -static void dbxout_switch_text_section (void);
> -static void dbxout_begin_prologue (unsigned int, unsigned int, const char *);
> -static void dbxout_source_file (const char *);
> -static void dbxout_function_end (tree);
> -static void dbxout_begin_function (tree);
> -static void dbxout_begin_block (unsigned, unsigned);
> -static void dbxout_end_block (unsigned, unsigned);
> -static void dbxout_function_decl (tree);
> -
> -const struct gcc_debug_hooks dbx_debug_hooks =
> -{
> - dbxout_init,
> - dbxout_finish,
> - debug_nothing_charstar,
> - debug_nothing_void,
> - debug_nothing_int_charstar,
> - debug_nothing_int_charstar,
> - dbxout_start_source_file,
> - dbxout_end_source_file,
> - dbxout_begin_block,
> - dbxout_end_block,
> - debug_true_const_tree, /* ignore_block */
> - dbxout_source_line, /* source_line */
> - debug_nothing_int_int_charstar, /* set_ignored_loc */
> - dbxout_begin_prologue, /* begin_prologue */
> - debug_nothing_int_charstar, /* end_prologue */
> - debug_nothing_int_charstar, /* begin_epilogue */
> - debug_nothing_int_charstar, /* end_epilogue */
> -#ifdef DBX_FUNCTION_FIRST
> - dbxout_begin_function,
> -#else
> - debug_nothing_tree, /* begin_function */
> -#endif
> - debug_nothing_int, /* end_function */
> - debug_nothing_tree, /* register_main_translation_unit */
> - dbxout_function_decl,
> - dbxout_early_global_decl, /* early_global_decl */
> - dbxout_late_global_decl, /* late_global_decl */
> - dbxout_type_decl, /* type_decl */
> - debug_nothing_tree_tree_tree_bool_bool,/* imported_module_or_decl */
> - debug_false_tree_charstarstar_uhwistar,/* die_ref_for_decl */
> - debug_nothing_tree_charstar_uhwi, /* register_external_die */
> - debug_nothing_tree, /* deferred_inline_function */
> - debug_nothing_tree, /* outlining_inline_function */
> - debug_nothing_rtx_code_label, /* label */
> - dbxout_handle_pch, /* handle_pch */
> - debug_nothing_rtx_insn, /* var_location */
> - debug_nothing_tree, /* inline_entry */
> - debug_nothing_tree, /* size_function */
> - dbxout_switch_text_section, /* switch_text_section */
> - debug_nothing_tree_tree, /* set_name */
> - 0, /* start_end_main_source_file */
> - TYPE_SYMTAB_IS_ADDRESS /* tree_type_symtab_field */
> -};
> -#endif /* DBX_DEBUGGING_INFO */
> -
> -#if defined (XCOFF_DEBUGGING_INFO)
> -const struct gcc_debug_hooks xcoff_debug_hooks =
> -{
> - dbxout_init,
> - dbxout_finish,
> - debug_nothing_charstar,
> - debug_nothing_void,
> - debug_nothing_int_charstar,
> - debug_nothing_int_charstar,
> - dbxout_start_source_file,
> - dbxout_end_source_file,
> - xcoffout_begin_block,
> - xcoffout_end_block,
> - debug_true_const_tree, /* ignore_block */
> - xcoffout_source_line,
> - debug_nothing_int_int_charstar, /* set_ignored_loc */
> - xcoffout_begin_prologue, /* begin_prologue */
> - debug_nothing_int_charstar, /* end_prologue */
> - debug_nothing_int_charstar, /* begin_epilogue */
> - xcoffout_end_epilogue,
> - debug_nothing_tree, /* begin_function */
> - xcoffout_end_function,
> - debug_nothing_tree, /* register_main_translation_unit */
> - debug_nothing_tree, /* function_decl */
> - dbxout_early_global_decl, /* early_global_decl */
> - dbxout_late_global_decl, /* late_global_decl */
> - dbxout_type_decl, /* type_decl */
> - debug_nothing_tree_tree_tree_bool_bool,/* imported_module_or_decl */
> - debug_false_tree_charstarstar_uhwistar,/* die_ref_for_decl */
> - debug_nothing_tree_charstar_uhwi, /* register_external_die */
> - debug_nothing_tree, /* deferred_inline_function */
> - debug_nothing_tree, /* outlining_inline_function */
> - debug_nothing_rtx_code_label, /* label */
> - dbxout_handle_pch, /* handle_pch */
> - debug_nothing_rtx_insn, /* var_location */
> - debug_nothing_tree, /* inline_entry */
> - debug_nothing_tree, /* size_function */
> - debug_nothing_void, /* switch_text_section */
> - debug_nothing_tree_tree, /* set_name */
> - 0, /* start_end_main_source_file */
> - TYPE_SYMTAB_IS_ADDRESS /* tree_type_symtab_field */
> -};
> -#endif /* XCOFF_DEBUGGING_INFO */
> -
> -/* Numeric formatting helper macro. Note that this does not handle
> - hexadecimal. */
> -#define NUMBER_FMT_LOOP(P, NUM, BASE) \
> - do \
> - { \
> - int digit = NUM % BASE; \
> - NUM /= BASE; \
> - *--P = digit + '0'; \
> - } \
> - while (NUM > 0)
> -
> -/* Utility: write a decimal integer NUM to asm_out_file. */
> -void
> -dbxout_int (int num)
> -{
> - char buf[64];
> - char *p = buf + sizeof buf;
> - unsigned int unum;
> -
> - if (num == 0)
> - {
> - putc ('0', asm_out_file);
> - return;
> - }
> - if (num < 0)
> - {
> - putc ('-', asm_out_file);
> - unum = -(unsigned int) num;
> - }
> - else
> - unum = num;
> -
> - NUMBER_FMT_LOOP (p, unum, 10);
> -
> - while (p < buf + sizeof buf)
> - {
> - putc (*p, asm_out_file);
> - p++;
> - }
> -}
> -
> -
> -/* Primitives for emitting simple stabs directives. All other stabs
> - routines should use these functions instead of directly emitting
> - stabs. They are exported because machine-dependent code may need
> - to invoke them, e.g. in a DBX_OUTPUT_* macro whose definition
> - forwards to code in CPU.c. */
> -
> -/* The following functions should all be called immediately after one
> - of the dbxout_begin_stab* functions (below). They write out
> - various things as the value of a stab. */
> -
> -/* Write out a literal zero as the value of a stab. */
> -void
> -dbxout_stab_value_zero (void)
> -{
> - fputs ("0\n", asm_out_file);
> -}
> -
> -/* Write out the label LABEL as the value of a stab. */
> -void
> -dbxout_stab_value_label (const char *label)
> -{
> - assemble_name (asm_out_file, label);
> - putc ('\n', asm_out_file);
> -}
> -
> -/* Write out the difference of two labels, LABEL - BASE, as the value
> - of a stab. */
> -void
> -dbxout_stab_value_label_diff (const char *label, const char *base)
> -{
> - assemble_name (asm_out_file, label);
> - putc ('-', asm_out_file);
> - assemble_name (asm_out_file, base);
> - putc ('\n', asm_out_file);
> -}
> -
> -/* Write out an internal label as the value of a stab, and immediately
> - emit that internal label. This should be used only when
> - dbxout_stabd will not work. STEM is the name stem of the label,
> - COUNTERP is a pointer to a counter variable which will be used to
> - guarantee label uniqueness. */
> -void
> -dbxout_stab_value_internal_label (const char *stem, int *counterp)
> -{
> - char label[100];
> - int counter = counterp ? (*counterp)++ : 0;
> -
> - ASM_GENERATE_INTERNAL_LABEL (label, stem, counter);
> - dbxout_stab_value_label (label);
> - targetm.asm_out.internal_label (asm_out_file, stem, counter);
> -}
> -
> -/* Write out the difference between BASE and an internal label as the
> - value of a stab, and immediately emit that internal label. STEM and
> - COUNTERP are as for dbxout_stab_value_internal_label. */
> -void
> -dbxout_stab_value_internal_label_diff (const char *stem, int *counterp,
> - const char *base)
> -{
> - char label[100];
> - int counter = counterp ? (*counterp)++ : 0;
> -
> - ASM_GENERATE_INTERNAL_LABEL (label, stem, counter);
> - dbxout_stab_value_label_diff (label, base);
> - targetm.asm_out.internal_label (asm_out_file, stem, counter);
> -}
> -
> -/* The following functions produce specific kinds of stab directives. */
> -
> -/* Write a .stabd directive with type STYPE and desc SDESC to asm_out_file. */
> -void
> -dbxout_stabd (int stype, int sdesc)
> -{
> - fputs (ASM_STABD_OP, asm_out_file);
> - dbxout_int (stype);
> - fputs (",0,", asm_out_file);
> - dbxout_int (sdesc);
> - putc ('\n', asm_out_file);
> -}
> -
> -/* Write a .stabn directive with type STYPE. This function stops
> - short of emitting the value field, which is the responsibility of
> - the caller (normally it will be either a symbol or the difference
> - of two symbols). */
> -
> -void
> -dbxout_begin_stabn (int stype)
> -{
> - fputs (ASM_STABN_OP, asm_out_file);
> - dbxout_int (stype);
> - fputs (",0,0,", asm_out_file);
> -}
> -
> -/* Write a .stabn directive with type N_SLINE and desc LINE. As above,
> - the value field is the responsibility of the caller. */
> -void
> -dbxout_begin_stabn_sline (int lineno)
> -{
> - fputs (ASM_STABN_OP, asm_out_file);
> - dbxout_int (N_SLINE);
> - fputs (",0,", asm_out_file);
> - dbxout_int (lineno);
> - putc (',', asm_out_file);
> -}
> -
> -/* Begin a .stabs directive with string "", type STYPE, and desc and
> - other fields 0. The value field is the responsibility of the
> - caller. This function cannot be used for .stabx directives. */
> -void
> -dbxout_begin_empty_stabs (int stype)
> -{
> - fputs (ASM_STABS_OP, asm_out_file);
> - fputs ("\"\",", asm_out_file);
> - dbxout_int (stype);
> - fputs (",0,0,", asm_out_file);
> -}
> -
> -/* Begin a .stabs directive with string STR, type STYPE, and desc 0.
> - The value field is the responsibility of the caller. */
> -void
> -dbxout_begin_simple_stabs (const char *str, int stype)
> -{
> - fputs (ASM_STABS_OP, asm_out_file);
> - output_quoted_string (asm_out_file, str);
> - putc (',', asm_out_file);
> - dbxout_int (stype);
> - fputs (",0,0,", asm_out_file);
> -}
> -
> -/* As above but use SDESC for the desc field. */
> -void
> -dbxout_begin_simple_stabs_desc (const char *str, int stype, int sdesc)
> -{
> - fputs (ASM_STABS_OP, asm_out_file);
> - output_quoted_string (asm_out_file, str);
> - putc (',', asm_out_file);
> - dbxout_int (stype);
> - fputs (",0,", asm_out_file);
> - dbxout_int (sdesc);
> - putc (',', asm_out_file);
> -}
> -
> -/* The next set of functions are entirely concerned with production of
> - "complex" .stabs directives: that is, .stabs directives whose
> - strings have to be constructed piecemeal. dbxout_type,
> - dbxout_symbol, etc. use these routines heavily. The string is queued
> - up in an obstack, then written out by dbxout_finish_complex_stabs, which
> - is also responsible for splitting it up if it exceeds DBX_CONTIN_LENGTH.
> - (You might think it would be more efficient to go straight to stdio
> - when DBX_CONTIN_LENGTH is 0 (i.e. no length limit) but that turns
> - out not to be the case, and anyway this needs fewer #ifdefs.) */
> -
> -/* Begin a complex .stabs directive. If we can, write the initial
> - ASM_STABS_OP to the asm_out_file. */
> -
> -static void
> -dbxout_begin_complex_stabs (void)
> -{
> - emit_pending_bincls_if_required ();
> - FORCE_TEXT;
> - fputs (ASM_STABS_OP, asm_out_file);
> - putc ('"', asm_out_file);
> - gcc_assert (stabstr_last_contin_point == 0);
> -}
> -
> -/* As above, but do not force text or emit pending bincls. This is
> - used by dbxout_symbol_location, which needs to do something else. */
> -static void
> -dbxout_begin_complex_stabs_noforcetext (void)
> -{
> - fputs (ASM_STABS_OP, asm_out_file);
> - putc ('"', asm_out_file);
> - gcc_assert (stabstr_last_contin_point == 0);
> -}
> -
> -/* Add CHR, a single character, to the string being built. */
> -#define stabstr_C(chr) obstack_1grow (&stabstr_ob, chr)
> -
> -/* Add STR, a normal C string, to the string being built. */
> -#define stabstr_S(str) obstack_grow (&stabstr_ob, str, strlen (str))
> -
> -/* Add the text of ID, an IDENTIFIER_NODE, to the string being built. */
> -#define stabstr_I(id) obstack_grow (&stabstr_ob, \
> - IDENTIFIER_POINTER (id), \
> - IDENTIFIER_LENGTH (id))
> -
> -/* Add NUM, a signed decimal number, to the string being built. */
> -static void
> -stabstr_D (HOST_WIDE_INT num)
> -{
> - char buf[64];
> - char *p = buf + sizeof buf;
> - unsigned HOST_WIDE_INT unum;
> -
> - if (num == 0)
> - {
> - stabstr_C ('0');
> - return;
> - }
> - if (num < 0)
> - {
> - stabstr_C ('-');
> - unum = -(unsigned HOST_WIDE_INT) num;
> - }
> - else
> - unum = num;
> -
> - NUMBER_FMT_LOOP (p, unum, 10);
> -
> - obstack_grow (&stabstr_ob, p, (buf + sizeof buf) - p);
> -}
> -
> -/* Add NUM, an unsigned decimal number, to the string being built. */
> -static void
> -stabstr_U (unsigned HOST_WIDE_INT num)
> -{
> - char buf[64];
> - char *p = buf + sizeof buf;
> - if (num == 0)
> - {
> - stabstr_C ('0');
> - return;
> - }
> - NUMBER_FMT_LOOP (p, num, 10);
> - obstack_grow (&stabstr_ob, p, (buf + sizeof buf) - p);
> -}
> -
> -/* Add CST, an INTEGER_CST tree, to the string being built as an
> - unsigned octal number. This routine handles values which are
> - larger than a single HOST_WIDE_INT. */
> -static void
> -stabstr_O (tree cst)
> -{
> - int prec = TYPE_PRECISION (TREE_TYPE (cst));
> - int res_pres = prec % 3;
> - int i;
> - unsigned int digit;
> -
> - /* Leading zero for base indicator. */
> - stabstr_C ('0');
> -
> - /* If the value is zero, the base indicator will serve as the value
> - all by itself. */
> - if (wi::to_wide (cst) == 0)
> - return;
> -
> - /* GDB wants constants with no extra leading "1" bits, so
> - we need to remove any sign-extension that might be
> - present. */
> - if (res_pres == 1)
> - {
> - digit = wi::extract_uhwi (wi::to_wide (cst), prec - 1, 1);
> - stabstr_C ('0' + digit);
> - }
> - else if (res_pres == 2)
> - {
> - digit = wi::extract_uhwi (wi::to_wide (cst), prec - 2, 2);
> - stabstr_C ('0' + digit);
> - }
> -
> - prec -= res_pres;
> - for (i = prec - 3; i >= 0; i = i - 3)
> - {
> - digit = wi::extract_uhwi (wi::to_wide (cst), i, 3);
> - stabstr_C ('0' + digit);
> - }
> -}
> -
> -/* Called whenever it is safe to break a stabs string into multiple
> - .stabs directives. If the current string has exceeded the limit
> - set by DBX_CONTIN_LENGTH, mark the current position in the buffer
> - as a continuation point by inserting DBX_CONTIN_CHAR (doubled if
> - it is a backslash) and a null character. */
> -static inline void
> -stabstr_continue (void)
> -{
> - if (DBX_CONTIN_LENGTH > 0
> - && obstack_object_size (&stabstr_ob) - stabstr_last_contin_point
> - > DBX_CONTIN_LENGTH)
> - {
> - if (DBX_CONTIN_CHAR == '\\')
> - obstack_1grow (&stabstr_ob, '\\');
> - obstack_1grow (&stabstr_ob, DBX_CONTIN_CHAR);
> - obstack_1grow (&stabstr_ob, '\0');
> - stabstr_last_contin_point = obstack_object_size (&stabstr_ob);
> - }
> -}
> -#define CONTIN stabstr_continue ()
> -
> -/* Macro subroutine of dbxout_finish_complex_stabs, which emits
> - all of the arguments to the .stabs directive after the string.
> - Overridden by xcoffout.h. CODE is the stabs code for this symbol;
> - LINE is the source line to write into the desc field (in extended
> - mode); SYM is the symbol itself.
> -
> - ADDR, LABEL, and NUMBER are three different ways to represent the
> - stabs value field. At most one of these should be nonzero.
> -
> - ADDR is used most of the time; it represents the value as an
> - RTL address constant.
> -
> - LABEL is used (currently) only for N_CATCH stabs; it represents
> - the value as a string suitable for assemble_name.
> -
> - NUMBER is used when the value is an offset from an implicit base
> - pointer (e.g. for a stack variable), or an index (e.g. for a
> - register variable). It represents the value as a decimal integer. */
> -
> -#ifndef DBX_FINISH_STABS
> -#define DBX_FINISH_STABS(SYM, CODE, LINE, ADDR, LABEL, NUMBER) \
> -do { \
> - int line_ = use_gnu_debug_info_extensions ? LINE : 0; \
> - \
> - dbxout_int (CODE); \
> - fputs (",0,", asm_out_file); \
> - dbxout_int (line_); \
> - putc (',', asm_out_file); \
> - if (ADDR) \
> - output_addr_const (asm_out_file, ADDR); \
> - else if (LABEL) \
> - assemble_name (asm_out_file, LABEL); \
> - else \
> - dbxout_int (NUMBER); \
> - putc ('\n', asm_out_file); \
> -} while (0)
> -#endif
> -
> -/* Finish the emission of a complex .stabs directive. When DBX_CONTIN_LENGTH
> - is zero, this has only to emit the close quote and the remainder of
> - the arguments. When it is nonzero, the string has been marshalled in
> - stabstr_ob, and this routine is responsible for breaking it up into
> - DBX_CONTIN_LENGTH-sized chunks.
> -
> - SYM is the DECL of the symbol under consideration; it is used only
> - for its DECL_SOURCE_LINE. The other arguments are all passed directly
> - to DBX_FINISH_STABS; see above for details. */
> -
> -static void
> -dbxout_finish_complex_stabs (tree sym, stab_code_type code,
> - rtx addr, const char *label, int number)
> -{
> - int line ATTRIBUTE_UNUSED;
> - char *str;
> - size_t len;
> -
> - line = sym ? DECL_SOURCE_LINE (sym) : 0;
> - if (DBX_CONTIN_LENGTH > 0)
> - {
> - char *chunk;
> - size_t chunklen;
> -
> - /* Nul-terminate the growing string, then get its size and
> - address. */
> - obstack_1grow (&stabstr_ob, '\0');
> -
> - len = obstack_object_size (&stabstr_ob);
> - chunk = str = XOBFINISH (&stabstr_ob, char *);
> -
> - /* Within the buffer are a sequence of NUL-separated strings,
> - each of which is to be written out as a separate stab
> - directive. */
> - for (;;)
> - {
> - chunklen = strlen (chunk);
> - fwrite (chunk, 1, chunklen, asm_out_file);
> - fputs ("\",", asm_out_file);
> -
> - /* Must add an extra byte to account for the NUL separator. */
> - chunk += chunklen + 1;
> - len -= chunklen + 1;
> -
> - /* Only put a line number on the last stab in the sequence. */
> - DBX_FINISH_STABS (sym, code, len == 0 ? line : 0,
> - addr, label, number);
> - if (len == 0)
> - break;
> -
> - fputs (ASM_STABS_OP, asm_out_file);
> - putc ('"', asm_out_file);
> - }
> - stabstr_last_contin_point = 0;
> - }
> - else
> - {
> - /* No continuations - we can put the whole string out at once.
> - It is faster to augment the string with the close quote and
> - comma than to do a two-character fputs. */
> - obstack_grow (&stabstr_ob, "\",", 2);
> - len = obstack_object_size (&stabstr_ob);
> - str = XOBFINISH (&stabstr_ob, char *);
> -
> - fwrite (str, 1, len, asm_out_file);
> - DBX_FINISH_STABS (sym, code, line, addr, label, number);
> - }
> - obstack_free (&stabstr_ob, str);
> -}
> -
> -#if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)
> -
> -/* When -gused is used, emit debug info for only used symbols. But in
> - addition to the standard intercepted debug_hooks there are some
> - direct calls into this file, i.e., dbxout_symbol, dbxout_parms, and
> - dbxout_reg_params. Those routines may also be called from a higher
> - level intercepted routine. So to prevent recording data for an inner
> - call to one of these for an intercept, we maintain an intercept
> - nesting counter (debug_nesting). We only save the intercepted
> - arguments if the nesting is 1. */
> -static int debug_nesting = 0;
> -
> -static tree *symbol_queue;
> -static int symbol_queue_index = 0;
> -static int symbol_queue_size = 0;
> -
> -#define DBXOUT_DECR_NESTING \
> - if (--debug_nesting == 0 && symbol_queue_index > 0) \
> - { emit_pending_bincls_if_required (); debug_flush_symbol_queue (); }
> -
> -#define DBXOUT_DECR_NESTING_AND_RETURN(x) \
> - do {--debug_nesting; return (x);} while (0)
> -
> -#endif /* DBX_DEBUGGING_INFO || XCOFF_DEBUGGING_INFO */
> -
> -#if defined (DBX_DEBUGGING_INFO)
> -
> -static void
> -dbxout_function_end (tree decl ATTRIBUTE_UNUSED)
> -{
> - char lscope_label_name[100];
> -
> - /* The Lscope label must be emitted even if we aren't doing anything
> - else; dbxout_block needs it. */
> - switch_to_section (current_function_section ());
> -
> - /* Convert Lscope into the appropriate format for local labels in case
> - the system doesn't insert underscores in front of user generated
> - labels. */
> - ASM_GENERATE_INTERNAL_LABEL (lscope_label_name, "Lscope", scope_labelno);
> - targetm.asm_out.internal_label (asm_out_file, "Lscope", scope_labelno);
> -
> - /* The N_FUN tag at the end of the function is a GNU extension,
> - which may be undesirable, and is unnecessary if we do not have
> - named sections. */
> - if (!use_gnu_debug_info_extensions
> - || NO_DBX_FUNCTION_END
> - || !targetm_common.have_named_sections)
> - return;
> -
> - /* By convention, GCC will mark the end of a function with an N_FUN
> - symbol and an empty string. */
> - if (crtl->has_bb_partition)
> - {
> - dbxout_begin_empty_stabs (N_FUN);
> - if (in_cold_section_p)
> - dbxout_stab_value_label_diff (crtl->subsections.cold_section_end_label,
> - crtl->subsections.cold_section_label);
> - else
> - dbxout_stab_value_label_diff (crtl->subsections.hot_section_end_label,
> - crtl->subsections.hot_section_label);
> - }
> - else
> - {
> - char begin_label[20];
> - /* Reference current function start using LFBB. */
> - ASM_GENERATE_INTERNAL_LABEL (begin_label, "LFBB", scope_labelno);
> - dbxout_begin_empty_stabs (N_FUN);
> - dbxout_stab_value_label_diff (lscope_label_name, begin_label);
> - }
> -
> - if (!NO_DBX_BNSYM_ENSYM && !flag_debug_only_used_symbols)
> - dbxout_stabd (N_ENSYM, 0);
> -}
> -#endif /* DBX_DEBUGGING_INFO */
> -
> -/* Get lang description for N_SO stab. */
> -static unsigned int ATTRIBUTE_UNUSED
> -get_lang_number (void)
> -{
> - const char *language_string = lang_hooks.name;
> - if (lang_GNU_C ())
> - return N_SO_C;
> - else if (lang_GNU_CXX ())
> - return N_SO_CC;
> - else if (strcmp (language_string, "GNU F77") == 0)
> - return N_SO_FORTRAN;
> - else if (lang_GNU_Fortran ())
> - return N_SO_FORTRAN90; /* CHECKME */
> - else if (strcmp (language_string, "GNU Objective-C") == 0)
> - return N_SO_OBJC;
> - else if (strcmp (language_string, "GNU Objective-C++") == 0)
> - return N_SO_OBJCPLUS;
> - else
> - return 0;
> -
> -}
> -
> -static bool
> -is_fortran (void)
> -{
> - unsigned int lang = get_lang_number ();
> -
> - return (lang == N_SO_FORTRAN) || (lang == N_SO_FORTRAN90);
> -}
> -
> -/* At the beginning of compilation, start writing the symbol table.
> - Initialize `typevec' and output the standard data types of C. */
> -
> -static void
> -dbxout_init (const char *input_file_name)
> -{
> - char ltext_label_name[100];
> - bool used_ltext_label_name = false;
> - tree syms = lang_hooks.decls.getdecls ();
> - const char *mapped_name;
> -
> - typevec_len = 100;
> - typevec = ggc_cleared_vec_alloc<typeinfo> (typevec_len);
> -
> - /* stabstr_ob contains one string, which will be just fine with
> - 1-byte alignment. */
> - obstack_specify_allocation (&stabstr_ob, 0, 1, xmalloc, free);
> -
> - /* Convert Ltext into the appropriate format for local labels in case
> - the system doesn't insert underscores in front of user generated
> - labels. */
> - ASM_GENERATE_INTERNAL_LABEL (ltext_label_name, "Ltext", 0);
> -
> - /* Put the current working directory in an N_SO symbol. */
> - if (use_gnu_debug_info_extensions && !NO_DBX_MAIN_SOURCE_DIRECTORY)
> - {
> - static const char *cwd;
> -
> - if (!cwd)
> - {
> - cwd = get_src_pwd ();
> - if (cwd[0] == '\0')
> - cwd = "/";
> - else if (!IS_DIR_SEPARATOR (cwd[strlen (cwd) - 1]))
> - cwd = concat (cwd, "/", NULL);
> - cwd = remap_debug_filename (cwd);
> - }
> -#ifdef DBX_OUTPUT_MAIN_SOURCE_DIRECTORY
> - DBX_OUTPUT_MAIN_SOURCE_DIRECTORY (asm_out_file, cwd);
> -#else /* no DBX_OUTPUT_MAIN_SOURCE_DIRECTORY */
> - dbxout_begin_simple_stabs_desc (cwd, N_SO, get_lang_number ());
> - dbxout_stab_value_label (ltext_label_name);
> - used_ltext_label_name = true;
> -#endif /* no DBX_OUTPUT_MAIN_SOURCE_DIRECTORY */
> - }
> -
> - mapped_name = remap_debug_filename (input_file_name);
> -#ifdef DBX_OUTPUT_MAIN_SOURCE_FILENAME
> - DBX_OUTPUT_MAIN_SOURCE_FILENAME (asm_out_file, mapped_name);
> -#else
> - dbxout_begin_simple_stabs_desc (mapped_name, N_SO, get_lang_number ());
> - dbxout_stab_value_label (ltext_label_name);
> - used_ltext_label_name = true;
> -#endif
> -
> - if (used_ltext_label_name)
> - {
> - switch_to_section (text_section);
> - targetm.asm_out.internal_label (asm_out_file, "Ltext", 0);
> - }
> -
> - /* Emit an N_OPT stab to indicate that this file was compiled by GCC.
> - The string used is historical. */
> -#ifndef NO_DBX_GCC_MARKER
> - dbxout_begin_simple_stabs ("gcc2_compiled.", N_OPT);
> - dbxout_stab_value_zero ();
> -#endif
> -
> - base_input_file = lastfile = input_file_name;
> -
> - next_type_number = 1;
> -
> -#ifdef DBX_USE_BINCL
> - current_file = XNEW (struct dbx_file);
> - current_file->next = NULL;
> - current_file->file_number = 0;
> - current_file->next_type_number = 1;
> - next_file_number = 1;
> - current_file->prev = NULL;
> - current_file->bincl_status = BINCL_NOT_REQUIRED;
> - current_file->pending_bincl_name = NULL;
> -#endif
> -
> - /* Get all permanent types that have typedef names, and output them
> - all, except for those already output. Some language front ends
> - put these declarations in the top-level scope; some do not;
> - the latter are responsible for calling debug_hooks->type_decl from
> - their record_builtin_type function. */
> - dbxout_typedefs (syms);
> -
> - if (preinit_symbols)
> - {
> - tree t;
> - for (t = nreverse (preinit_symbols); t; t = TREE_CHAIN (t))
> - dbxout_symbol (TREE_VALUE (t), 0);
> - preinit_symbols = 0;
> - }
> -}
> -
> -/* Output any typedef names for types described by TYPE_DECLs in SYMS. */
> -
> -static void
> -dbxout_typedefs (tree syms)
> -{
> - for (; syms != NULL_TREE; syms = DECL_CHAIN (syms))
> - {
> - if (TREE_CODE (syms) == TYPE_DECL)
> - {
> - tree type = TREE_TYPE (syms);
> - if (TYPE_NAME (type)
> - && TREE_CODE (TYPE_NAME (type)) == TYPE_DECL
> - && COMPLETE_OR_VOID_TYPE_P (type)
> - && ! TREE_ASM_WRITTEN (TYPE_NAME (type)))
> - dbxout_symbol (TYPE_NAME (type), 0);
> - }
> - }
> -}
> -
> -#ifdef DBX_USE_BINCL
> -/* Emit BINCL stab using given name. */
> -static void
> -emit_bincl_stab (const char *name)
> -{
> - dbxout_begin_simple_stabs (name, N_BINCL);
> - dbxout_stab_value_zero ();
> -}
> -
> -/* If there are pending bincls then it is time to emit all of them. */
> -
> -static inline void
> -emit_pending_bincls_if_required (void)
> -{
> - if (pending_bincls)
> - emit_pending_bincls ();
> -}
> -
> -/* Emit all pending bincls. */
> -
> -static void
> -emit_pending_bincls (void)
> -{
> - struct dbx_file *f = current_file;
> -
> - /* Find first pending bincl. */
> - while (f->bincl_status == BINCL_PENDING)
> - f = f->next;
> -
> - /* Now emit all bincls. */
> - f = f->prev;
> -
> - while (f)
> - {
> - if (f->bincl_status == BINCL_PENDING)
> - {
> - emit_bincl_stab (f->pending_bincl_name);
> -
> - /* Update file number and status. */
> - f->file_number = next_file_number++;
> - f->bincl_status = BINCL_PROCESSED;
> - }
> - if (f == current_file)
> - break;
> - f = f->prev;
> - }
> -
> - /* All pending bincls have been emitted. */
> - pending_bincls = 0;
> -}
> -
> -#else
> -
> -static inline void
> -emit_pending_bincls_if_required (void) {}
> -#endif
> -
> -/* Change to reading from a new source file. Generate a N_BINCL stab. */
> -
> -static void
> -dbxout_start_source_file (unsigned int line ATTRIBUTE_UNUSED,
> - const char *filename ATTRIBUTE_UNUSED)
> -{
> -#ifdef DBX_USE_BINCL
> - struct dbx_file *n = XNEW (struct dbx_file);
> -
> - n->next = current_file;
> - n->next_type_number = 1;
> - /* Do not assign file number now.
> - Delay it until we actually emit BINCL. */
> - n->file_number = 0;
> - n->prev = NULL;
> - current_file->prev = n;
> - n->bincl_status = BINCL_PENDING;
> - n->pending_bincl_name = remap_debug_filename (filename);
> - pending_bincls = 1;
> - current_file = n;
> -#endif
> -}
> -
> -/* Revert to reading a previous source file. Generate a N_EINCL stab. */
> -
> -static void
> -dbxout_end_source_file (unsigned int line ATTRIBUTE_UNUSED)
> -{
> -#ifdef DBX_USE_BINCL
> - /* Emit EINCL stab only if BINCL is not pending. */
> - if (current_file->bincl_status == BINCL_PROCESSED)
> - {
> - dbxout_begin_stabn (N_EINCL);
> - dbxout_stab_value_zero ();
> - }
> - current_file->bincl_status = BINCL_NOT_REQUIRED;
> - current_file = current_file->next;
> -#endif
> -}
> -
> -/* Handle a few odd cases that occur when trying to make PCH files work. */
> -
> -static void
> -dbxout_handle_pch (unsigned at_end)
> -{
> - if (! at_end)
> - {
> - /* When using the PCH, this file will be included, so we need to output
> - a BINCL. */
> - dbxout_start_source_file (0, lastfile);
> -
> - /* The base file when using the PCH won't be the same as
> - the base file when it's being generated. */
> - lastfile = NULL;
> - }
> - else
> - {
> - /* ... and an EINCL. */
> - dbxout_end_source_file (0);
> -
> - /* Deal with cases where 'lastfile' was never actually changed. */
> - lastfile_is_base = lastfile == NULL;
> - }
> -}
> -
> -#if defined (DBX_DEBUGGING_INFO)
> -
> -static bool dbxout_block (tree, int, tree, int);
> -
> -/* Output debugging info to FILE to switch to sourcefile FILENAME. */
> -
> -static void
> -dbxout_source_file (const char *filename)
> -{
> - if (lastfile == 0 && lastfile_is_base)
> - {
> - lastfile = base_input_file;
> - lastfile_is_base = 0;
> - }
> -
> - if (filename && (lastfile == 0 || strcmp (filename, lastfile)))
> - {
> - /* Don't change section amid function. */
> - if (current_function_decl == NULL_TREE)
> - switch_to_section (text_section);
> -
> - dbxout_begin_simple_stabs (remap_debug_filename (filename), N_SOL);
> - dbxout_stab_value_internal_label ("Ltext", &source_label_number);
> - lastfile = filename;
> - }
> -}
> -
> -/* Output N_BNSYM, line number symbol entry, and local symbol at
> - function scope */
> -
> -static void
> -dbxout_begin_prologue (unsigned int lineno,
> - unsigned int column ATTRIBUTE_UNUSED,
> - const char *filename)
> -{
> - if (use_gnu_debug_info_extensions
> - && !NO_DBX_FUNCTION_END
> - && !NO_DBX_BNSYM_ENSYM
> - && !flag_debug_only_used_symbols)
> - dbxout_stabd (N_BNSYM, 0);
> -
> - /* pre-increment the scope counter */
> - scope_labelno++;
> -
> - dbxout_source_line (lineno, 0, filename, 0, true);
> - /* Output function begin block at function scope, referenced
> - by dbxout_block, dbxout_source_line and dbxout_function_end. */
> - emit_pending_bincls_if_required ();
> - targetm.asm_out.internal_label (asm_out_file, "LFBB", scope_labelno);
> -}
> -
> -/* Output a line number symbol entry for source file FILENAME and line
> - number LINENO. */
> -
> -static void
> -dbxout_source_line (unsigned int lineno, unsigned int column ATTRIBUTE_UNUSED,
> - const char *filename, int discriminator ATTRIBUTE_UNUSED,
> - bool is_stmt ATTRIBUTE_UNUSED)
> -{
> - dbxout_source_file (filename);
> -
> -#ifdef DBX_OUTPUT_SOURCE_LINE
> - DBX_OUTPUT_SOURCE_LINE (asm_out_file, lineno, dbxout_source_line_counter);
> -#else
> - if (DBX_LINES_FUNCTION_RELATIVE)
> - {
> - char begin_label[20];
> - dbxout_begin_stabn_sline (lineno);
> - /* Reference current function start using LFBB. */
> - ASM_GENERATE_INTERNAL_LABEL (begin_label, "LFBB", scope_labelno);
> - dbxout_stab_value_internal_label_diff ("LM", &dbxout_source_line_counter,
> - begin_label);
> - }
> - else
> - dbxout_stabd (N_SLINE, lineno);
> -#endif
> - lastlineno = lineno;
> -}
> -
> -/* Unfortunately, at least when emitting relative addresses, STABS
> - has no way to express multiple partitions. Represent a function
> - as two functions in this case. */
> -
> -static void
> -dbxout_switch_text_section (void)
> -{
> - /* The N_FUN tag at the end of the function is a GNU extension,
> - which may be undesirable, and is unnecessary if we do not have
> - named sections. */
> - in_cold_section_p = !in_cold_section_p;
> - switch_to_section (current_function_section ());
> - dbxout_block (DECL_INITIAL (current_function_decl), 0,
> - DECL_ARGUMENTS (current_function_decl), -1);
> - dbxout_function_end (current_function_decl);
> - in_cold_section_p = !in_cold_section_p;
> -
> - switch_to_section (current_function_section ());
> -
> - tree context = decl_function_context (current_function_decl);
> - extern tree cold_function_name;
> -
> - dbxout_begin_complex_stabs ();
> - stabstr_I (cold_function_name);
> - stabstr_S (":f");
> -
> - tree type = TREE_TYPE (current_function_decl);
> - if (TREE_TYPE (type))
> - dbxout_type (TREE_TYPE (type), 0);
> - else
> - dbxout_type (void_type_node, 0);
> -
> - if (context != 0)
> - {
> - stabstr_C (',');
> - stabstr_I (cold_function_name);
> - stabstr_C (',');
> - stabstr_I (DECL_NAME (context));
> - }
> -
> - dbxout_finish_complex_stabs (current_function_decl, N_FUN, 0,
> - crtl->subsections.cold_section_label, 0);
> -
> - /* pre-increment the scope counter */
> - scope_labelno++;
> -
> - dbxout_source_line (lastlineno, 0, lastfile, 0, true);
> - /* Output function begin block at function scope, referenced
> - by dbxout_block, dbxout_source_line and dbxout_function_end. */
> - emit_pending_bincls_if_required ();
> - targetm.asm_out.internal_label (asm_out_file, "LFBB", scope_labelno);
> -}
> -
> -/* Describe the beginning of an internal block within a function. */
> -
> -static void
> -dbxout_begin_block (unsigned int line ATTRIBUTE_UNUSED, unsigned int n)
> -{
> - emit_pending_bincls_if_required ();
> - targetm.asm_out.internal_label (asm_out_file, "LBB", n);
> -}
> -
> -/* Describe the end line-number of an internal block within a function. */
> -
> -static void
> -dbxout_end_block (unsigned int line ATTRIBUTE_UNUSED, unsigned int n)
> -{
> - emit_pending_bincls_if_required ();
> - targetm.asm_out.internal_label (asm_out_file, "LBE", n);
> -}
> -
> -/* Output dbx data for a function definition.
> - This includes a definition of the function name itself (a symbol),
> - definitions of the parameters (locating them in the parameter list)
> - and then output the block that makes up the function's body
> - (including all the auto variables of the function). */
> -
> -static void
> -dbxout_function_decl (tree decl)
> -{
> - emit_pending_bincls_if_required ();
> -#ifndef DBX_FUNCTION_FIRST
> - dbxout_begin_function (decl);
> -#endif
> - dbxout_block (DECL_INITIAL (decl), 0, DECL_ARGUMENTS (decl), -1);
> - dbxout_function_end (decl);
> -}
> -
> -#endif /* DBX_DEBUGGING_INFO */
> -
> -static void
> -dbxout_early_global_decl (tree decl ATTRIBUTE_UNUSED)
> -{
> - /* NYI for non-dwarf. */
> -}
> -
> -/* Debug information for a global DECL. Called from toplev.cc after
> - compilation proper has finished. */
> -static void
> -dbxout_late_global_decl (tree decl)
> -{
> - if (VAR_P (decl) && !DECL_EXTERNAL (decl))
> - {
> - int saved_tree_used = TREE_USED (decl);
> - TREE_USED (decl) = 1;
> - dbxout_symbol (decl, 0);
> - TREE_USED (decl) = saved_tree_used;
> - }
> -}
> -
> -/* This is just a function-type adapter; dbxout_symbol does exactly
> - what we want but returns an int. */
> -static void
> -dbxout_type_decl (tree decl, int local)
> -{
> - dbxout_symbol (decl, local);
> -}
> -
> -/* At the end of compilation, finish writing the symbol table.
> - The default is to call debug_free_queue but do nothing else. */
> -
> -static void
> -dbxout_finish (const char *filename ATTRIBUTE_UNUSED)
> -{
> -#ifdef DBX_OUTPUT_MAIN_SOURCE_FILE_END
> - DBX_OUTPUT_MAIN_SOURCE_FILE_END (asm_out_file, filename);
> -#elif defined DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
> - {
> - switch_to_section (text_section);
> - dbxout_begin_empty_stabs (N_SO);
> - dbxout_stab_value_internal_label ("Letext", 0);
> - }
> -#endif
> - debug_free_queue ();
> -}
> -
> -/* Output the index of a type. */
> -
> -static void
> -dbxout_type_index (tree type)
> -{
> -#ifndef DBX_USE_BINCL
> - stabstr_D (TYPE_SYMTAB_ADDRESS (type));
> -#else
> - struct typeinfo *t = &typevec[TYPE_SYMTAB_ADDRESS (type)];
> - stabstr_C ('(');
> - stabstr_D (t->file_number);
> - stabstr_C (',');
> - stabstr_D (t->type_number);
> - stabstr_C (')');
> -#endif
> -}
> -
> -
> -/* Generate the symbols for any queued up type symbols we encountered
> - while generating the type info for some originally used symbol.
> - This might generate additional entries in the queue. Only when
> - the nesting depth goes to 0 is this routine called. */
> -
> -static void
> -debug_flush_symbol_queue (void)
> -{
> - int i;
> -
> - /* Make sure that additionally queued items are not flushed
> - prematurely. */
> -
> - ++debug_nesting;
> -
> - for (i = 0; i < symbol_queue_index; ++i)
> - {
> - /* If we pushed queued symbols then such symbols must be
> - output no matter what anyone else says. Specifically,
> - we need to make sure dbxout_symbol() thinks the symbol was
> - used and also we need to override TYPE_DECL_SUPPRESS_DEBUG
> - which may be set for outside reasons. */
> - int saved_tree_used = TREE_USED (symbol_queue[i]);
> - int saved_suppress_debug = TYPE_DECL_SUPPRESS_DEBUG (symbol_queue[i]);
> - TREE_USED (symbol_queue[i]) = 1;
> - TYPE_DECL_SUPPRESS_DEBUG (symbol_queue[i]) = 0;
> -
> -#ifdef DBX_DEBUGGING_INFO
> - dbxout_symbol (symbol_queue[i], 0);
> -#endif
> -
> - TREE_USED (symbol_queue[i]) = saved_tree_used;
> - TYPE_DECL_SUPPRESS_DEBUG (symbol_queue[i]) = saved_suppress_debug;
> - }
> -
> - symbol_queue_index = 0;
> - --debug_nesting;
> -}
> -
> -/* Queue a type symbol needed as part of the definition of a decl
> - symbol. These symbols are generated when debug_flush_symbol_queue()
> - is called. */
> -
> -static void
> -debug_queue_symbol (tree decl)
> -{
> - if (symbol_queue_index >= symbol_queue_size)
> - {
> - symbol_queue_size += 10;
> - symbol_queue = XRESIZEVEC (tree, symbol_queue, symbol_queue_size);
> - }
> -
> - symbol_queue[symbol_queue_index++] = decl;
> -}
> -
> -/* Free symbol queue. */
> -static void
> -debug_free_queue (void)
> -{
> - if (symbol_queue)
> - {
> - free (symbol_queue);
> - symbol_queue = NULL;
> - symbol_queue_size = 0;
> - }
> -}
> -
> -/* Used in several places: evaluates to '0' for a private decl,
> - '1' for a protected decl, '2' for a public decl. */
> -#define DECL_ACCESSIBILITY_CHAR(DECL) \
> -(TREE_PRIVATE (DECL) ? '0' : TREE_PROTECTED (DECL) ? '1' : '2')
> -
> -/* Subroutine of `dbxout_type'. Output the type fields of TYPE.
> - This must be a separate function because anonymous unions require
> - recursive calls. */
> -
> -static void
> -dbxout_type_fields (tree type)
> -{
> - tree tem;
> -
> - /* Output the name, type, position (in bits), size (in bits) of each
> - field that we can support. */
> - for (tem = TYPE_FIELDS (type); tem; tem = DECL_CHAIN (tem))
> - {
> - /* If one of the nodes is an error_mark or its type is then
> - return early. */
> - if (error_operand_p (tem))
> - return;
> -
> - /* Omit here local type decls until we know how to support them. */
> - if (TREE_CODE (tem) == TYPE_DECL
> - || TREE_CODE (tem) == TEMPLATE_DECL
> - /* Member functions emitted after fields. */
> - || TREE_CODE (tem) == FUNCTION_DECL
> - /* Omit here the nameless fields that are used to skip bits. */
> - || DECL_IGNORED_P (tem)
> - /* Omit fields whose position or size are variable or too large to
> - represent. */
> - || (TREE_CODE (tem) == FIELD_DECL
> - && (! tree_fits_shwi_p (bit_position (tem))
> - || ! DECL_SIZE (tem)
> - || ! tree_fits_uhwi_p (DECL_SIZE (tem)))))
> - continue;
> -
> - else if (TREE_CODE (tem) != CONST_DECL)
> - {
> - /* Continue the line if necessary,
> - but not before the first field. */
> - if (tem != TYPE_FIELDS (type))
> - CONTIN;
> -
> - if (DECL_NAME (tem))
> - stabstr_I (DECL_NAME (tem));
> - stabstr_C (':');
> -
> - if (use_gnu_debug_info_extensions
> - && (TREE_PRIVATE (tem) || TREE_PROTECTED (tem)
> - || TREE_CODE (tem) != FIELD_DECL))
> - {
> - stabstr_C ('/');
> - stabstr_C (DECL_ACCESSIBILITY_CHAR (tem));
> - }
> -
> - dbxout_type ((TREE_CODE (tem) == FIELD_DECL
> - && DECL_BIT_FIELD_TYPE (tem))
> - ? DECL_BIT_FIELD_TYPE (tem) : TREE_TYPE (tem), 0);
> -
> - if (VAR_P (tem))
> - {
> - if (TREE_STATIC (tem) && use_gnu_debug_info_extensions)
> - {
> - tree name = DECL_ASSEMBLER_NAME (tem);
> -
> - stabstr_C (':');
> - stabstr_I (name);
> - stabstr_C (';');
> - }
> - else
> - /* If TEM is non-static, GDB won't understand it. */
> - stabstr_S (",0,0;");
> - }
> - else
> - {
> - stabstr_C (',');
> - stabstr_D (int_bit_position (tem));
> - stabstr_C (',');
> - stabstr_D (tree_to_uhwi (DECL_SIZE (tem)));
> - stabstr_C (';');
> - }
> - }
> - }
> -}
> -
> -/* Subroutine of `dbxout_type_methods'. Output debug info about the
> - method described DECL. */
> -
> -static void
> -dbxout_type_method_1 (tree decl)
> -{
> - char c1 = 'A', c2;
> -
> - if (TREE_CODE (TREE_TYPE (decl)) == FUNCTION_TYPE)
> - c2 = '?';
> - else /* it's a METHOD_TYPE. */
> - {
> - tree firstarg = TREE_VALUE (TYPE_ARG_TYPES (TREE_TYPE (decl)));
> - /* A for normal functions.
> - B for `const' member functions.
> - C for `volatile' member functions.
> - D for `const volatile' member functions. */
> - if (TYPE_READONLY (TREE_TYPE (firstarg)))
> - c1 += 1;
> - if (TYPE_VOLATILE (TREE_TYPE (firstarg)))
> - c1 += 2;
> -
> - if (DECL_VINDEX (decl))
> - c2 = '*';
> - else
> - c2 = '.';
> - }
> -
> - /* ??? Output the mangled name, which contains an encoding of the
> - method's type signature. May not be necessary anymore. */
> - stabstr_C (':');
> - stabstr_I (DECL_ASSEMBLER_NAME (decl));
> - stabstr_C (';');
> - stabstr_C (DECL_ACCESSIBILITY_CHAR (decl));
> - stabstr_C (c1);
> - stabstr_C (c2);
> -
> - if (DECL_VINDEX (decl) && tree_fits_shwi_p (DECL_VINDEX (decl)))
> - {
> - stabstr_D (tree_to_shwi (DECL_VINDEX (decl)));
> - stabstr_C (';');
> - dbxout_type (DECL_CONTEXT (decl), 0);
> - stabstr_C (';');
> - }
> -}
> -
> -/* Subroutine of `dbxout_type'. Output debug info about the member
> - functions defined in TYPE. */
> -
> -static void
> -dbxout_type_methods (tree type)
> -{
> - for (tree fndecl = TYPE_FIELDS (type); fndecl;)
> - {
> - int need_prefix = 1;
> -
> - /* Group together all the methods for the same operation.
> - These differ in the types of the arguments. */
> - for (tree last = NULL_TREE;
> - fndecl && (last == NULL_TREE || DECL_NAME (fndecl) == DECL_NAME (last));
> - fndecl = DECL_CHAIN (fndecl))
> - /* Output the name of the field (after overloading), as
> - well as the name of the field before overloading, along
> - with its parameter list */
> - {
> - /* Skip non-functions. */
> - if (TREE_CODE (fndecl) != FUNCTION_DECL)
> - continue;
> -
> - /* Also ignore abstract methods; those are only interesting to
> - the DWARF backends. */
> - if (DECL_IGNORED_P (fndecl) || DECL_ABSTRACT_P (fndecl))
> - continue;
> -
> - CONTIN;
> -
> - last = fndecl;
> -
> - /* Redundantly output the plain name, since that's what gdb
> - expects. */
> - if (need_prefix)
> - {
> - stabstr_I (DECL_NAME (fndecl));
> - stabstr_S ("::");
> - need_prefix = 0;
> - }
> -
> - dbxout_type (TREE_TYPE (fndecl), 0);
> - dbxout_type_method_1 (fndecl);
> - }
> - if (!need_prefix)
> - stabstr_C (';');
> - }
> -}
> -
> -/* Emit a "range" type specification, which has the form:
> - "r<index type>;<lower bound>;<upper bound>;".
> - TYPE is an INTEGER_TYPE, LOW and HIGH are the bounds. */
> -
> -static void
> -dbxout_range_type (tree type, tree low, tree high)
> -{
> - stabstr_C ('r');
> - if (TREE_TYPE (type))
> - dbxout_type (TREE_TYPE (type), 0);
> - else if (TREE_CODE (type) != INTEGER_TYPE)
> - dbxout_type (type, 0);
> - else
> - {
> - /* Traditionally, we made sure 'int' was type 1, and builtin types
> - were defined to be sub-ranges of int. Unfortunately, this
> - does not allow us to distinguish true sub-ranges from integer
> - types. So, instead we define integer (non-sub-range) types as
> - sub-ranges of themselves. This matters for Chill. If this isn't
> - a subrange type, then we want to define it in terms of itself.
> - However, in C, this may be an anonymous integer type, and we don't
> - want to emit debug info referring to it. Just calling
> - dbxout_type_index won't work anyways, because the type hasn't been
> - defined yet. We make this work for both cases by checked to see
> - whether this is a defined type, referring to it if it is, and using
> - 'int' otherwise. */
> - if (TYPE_SYMTAB_ADDRESS (type) != 0)
> - dbxout_type_index (type);
> - else
> - dbxout_type_index (integer_type_node);
> - }
> -
> - stabstr_C (';');
> - if (low && tree_fits_shwi_p (low))
> - {
> - if (print_int_cst_bounds_in_octal_p (type, low, high))
> - stabstr_O (low);
> - else
> - stabstr_D (tree_to_shwi (low));
> - }
> - else
> - stabstr_C ('0');
> -
> - stabstr_C (';');
> - if (high && tree_fits_shwi_p (high))
> - {
> - if (print_int_cst_bounds_in_octal_p (type, low, high))
> - stabstr_O (high);
> - else
> - stabstr_D (tree_to_shwi (high));
> - stabstr_C (';');
> - }
> - else
> - stabstr_S ("-1;");
> -}
> -
> -
> -/* Output a reference to a type. If the type has not yet been
> - described in the dbx output, output its definition now.
> - For a type already defined, just refer to its definition
> - using the type number.
> -
> - If FULL is nonzero, and the type has been described only with
> - a forward-reference, output the definition now.
> - If FULL is zero in this case, just refer to the forward-reference
> - using the number previously allocated. */
> -
> -static void
> -dbxout_type (tree type, int full)
> -{
> - static int anonymous_type_number = 0;
> - tree tem, main_variant, low, high;
> -
> - if (TREE_CODE (type) == INTEGER_TYPE)
> - {
> - if (TREE_TYPE (type) == 0)
> - {
> - low = TYPE_MIN_VALUE (type);
> - high = TYPE_MAX_VALUE (type);
> - }
> -
> - else if (subrange_type_for_debug_p (type, &low, &high))
> - ;
> -
> - /* If this is a subtype that should not be emitted as a subrange type,
> - use the base type. */
> - else
> - {
> - type = TREE_TYPE (type);
> - low = TYPE_MIN_VALUE (type);
> - high = TYPE_MAX_VALUE (type);
> - }
> - }
> -
> - /* If there was an input error and we don't really have a type,
> - avoid crashing and write something that is at least valid
> - by assuming `int'. */
> - if (type == error_mark_node)
> - type = integer_type_node;
> - else
> - {
> - if (TYPE_NAME (type)
> - && TREE_CODE (TYPE_NAME (type)) == TYPE_DECL
> - && TYPE_DECL_SUPPRESS_DEBUG (TYPE_NAME (type)))
> - full = 0;
> - }
> -
> - /* Try to find the "main variant" with the same name. */
> - if (TYPE_NAME (type) && TREE_CODE (TYPE_NAME (type)) == TYPE_DECL
> - && DECL_ORIGINAL_TYPE (TYPE_NAME (type)))
> - main_variant = TREE_TYPE (TYPE_NAME (type));
> - else
> - main_variant = TYPE_MAIN_VARIANT (type);
> -
> - /* If we are not using extensions, stabs does not distinguish const and
> - volatile, so there is no need to make them separate types. */
> - if (!use_gnu_debug_info_extensions)
> - type = main_variant;
> -
> - if (TYPE_SYMTAB_ADDRESS (type) == 0)
> - {
> - /* Type has no dbx number assigned. Assign next available number. */
> - TYPE_SYMTAB_ADDRESS (type) = next_type_number++;
> -
> - /* Make sure type vector is long enough to record about this type. */
> -
> - if (next_type_number == typevec_len)
> - {
> - typevec = GGC_RESIZEVEC (struct typeinfo, typevec, typevec_len * 2);
> - memset (typevec + typevec_len, 0, typevec_len * sizeof typevec[0]);
> - typevec_len *= 2;
> - }
> -
> -#ifdef DBX_USE_BINCL
> - emit_pending_bincls_if_required ();
> - typevec[TYPE_SYMTAB_ADDRESS (type)].file_number
> - = current_file->file_number;
> - typevec[TYPE_SYMTAB_ADDRESS (type)].type_number
> - = current_file->next_type_number++;
> -#endif
> - }
> -
> - if (flag_debug_only_used_symbols)
> - {
> - if ((TREE_CODE (type) == RECORD_TYPE
> - || TREE_CODE (type) == UNION_TYPE
> - || TREE_CODE (type) == QUAL_UNION_TYPE
> - || TREE_CODE (type) == ENUMERAL_TYPE)
> - && TYPE_STUB_DECL (type)
> - && DECL_P (TYPE_STUB_DECL (type))
> - && ! DECL_IGNORED_P (TYPE_STUB_DECL (type)))
> - debug_queue_symbol (TYPE_STUB_DECL (type));
> - else if (TYPE_NAME (type)
> - && TREE_CODE (TYPE_NAME (type)) == TYPE_DECL)
> - debug_queue_symbol (TYPE_NAME (type));
> - }
> -
> - /* Output the number of this type, to refer to it. */
> - dbxout_type_index (type);
> -
> -#ifdef DBX_TYPE_DEFINED
> - if (DBX_TYPE_DEFINED (type))
> - return;
> -#endif
> -
> - /* If this type's definition has been output or is now being output,
> - that is all. */
> -
> - switch (typevec[TYPE_SYMTAB_ADDRESS (type)].status)
> - {
> - case TYPE_UNSEEN:
> - break;
> - case TYPE_XREF:
> - /* If we have already had a cross reference,
> - and either that's all we want or that's the best we could do,
> - don't repeat the cross reference.
> - Sun dbx crashes if we do. */
> - if (! full || !COMPLETE_TYPE_P (type)
> - /* No way in DBX fmt to describe a variable size. */
> - || ! tree_fits_uhwi_p (TYPE_SIZE (type)))
> - return;
> - break;
> - case TYPE_DEFINED:
> - return;
> - }
> -
> -#ifdef DBX_NO_XREFS
> - /* For systems where dbx output does not allow the `=xsNAME:' syntax,
> - leave the type-number completely undefined rather than output
> - a cross-reference. If we have already used GNU debug info extensions,
> - then it is OK to output a cross reference. This is necessary to get
> - proper C++ debug output. */
> - if ((TREE_CODE (type) == RECORD_TYPE || TREE_CODE (type) == UNION_TYPE
> - || TREE_CODE (type) == QUAL_UNION_TYPE
> - || TREE_CODE (type) == ENUMERAL_TYPE)
> - && ! use_gnu_debug_info_extensions)
> - /* We must use the same test here as we use twice below when deciding
> - whether to emit a cross-reference. */
> - if ((TYPE_NAME (type) != 0
> - && ! (TREE_CODE (TYPE_NAME (type)) == TYPE_DECL
> - && DECL_IGNORED_P (TYPE_NAME (type)))
> - && !full)
> - || !COMPLETE_TYPE_P (type)
> - /* No way in DBX fmt to describe a variable size. */
> - || ! tree_fits_uhwi_p (TYPE_SIZE (type)))
> - {
> - typevec[TYPE_SYMTAB_ADDRESS (type)].status = TYPE_XREF;
> - return;
> - }
> -#endif
> -
> - /* Output a definition now. */
> - stabstr_C ('=');
> -
> - /* Mark it as defined, so that if it is self-referent
> - we will not get into an infinite recursion of definitions. */
> -
> - typevec[TYPE_SYMTAB_ADDRESS (type)].status = TYPE_DEFINED;
> -
> - /* If this type is a variant of some other, hand off. Types with
> - different names are usefully distinguished. We only distinguish
> - cv-qualified types if we're using extensions. */
> - if (TYPE_READONLY (type) > TYPE_READONLY (main_variant))
> - {
> - stabstr_C ('k');
> - dbxout_type (build_type_variant (type, 0, TYPE_VOLATILE (type)), 0);
> - return;
> - }
> - else if (TYPE_VOLATILE (type) > TYPE_VOLATILE (main_variant))
> - {
> - stabstr_C ('B');
> - dbxout_type (build_type_variant (type, TYPE_READONLY (type), 0), 0);
> - return;
> - }
> - else if (main_variant != TYPE_MAIN_VARIANT (type))
> - {
> - if (flag_debug_only_used_symbols)
> - {
> - tree orig_type = DECL_ORIGINAL_TYPE (TYPE_NAME (type));
> -
> - if ((TREE_CODE (orig_type) == RECORD_TYPE
> - || TREE_CODE (orig_type) == UNION_TYPE
> - || TREE_CODE (orig_type) == QUAL_UNION_TYPE
> - || TREE_CODE (orig_type) == ENUMERAL_TYPE)
> - && TYPE_STUB_DECL (orig_type)
> - && ! DECL_IGNORED_P (TYPE_STUB_DECL (orig_type)))
> - debug_queue_symbol (TYPE_STUB_DECL (orig_type));
> - }
> - /* 'type' is a typedef; output the type it refers to. */
> - dbxout_type (DECL_ORIGINAL_TYPE (TYPE_NAME (type)), 0);
> - return;
> - }
> - /* else continue. */
> -
> - switch (TREE_CODE (type))
> - {
> - case VOID_TYPE:
> - case NULLPTR_TYPE:
> - case LANG_TYPE:
> - case OPAQUE_TYPE:
> - /* For a void type, just define it as itself; i.e., "5=5".
> - This makes us consider it defined
> - without saying what it is. The debugger will make it
> - a void type when the reference is seen, and nothing will
> - ever override that default. */
> - dbxout_type_index (type);
> - break;
> -
> - case INTEGER_TYPE:
> - if (type == char_type_node && ! TYPE_UNSIGNED (type))
> - {
> - /* Output the type `char' as a subrange of itself!
> - I don't understand this definition, just copied it
> - from the output of pcc.
> - This used to use `r2' explicitly and we used to
> - take care to make sure that `char' was type number 2. */
> - stabstr_C ('r');
> - dbxout_type_index (type);
> - stabstr_S (";0;127;");
> - }
> -
> - /* If this is a subtype of another integer type, always prefer to
> - write it as a subtype. */
> - else if (TREE_TYPE (type) != 0
> - && TREE_CODE (TREE_TYPE (type)) == INTEGER_TYPE)
> - {
> - /* If the size is non-standard, say what it is if we can use
> - GDB extensions. */
> -
> - if (use_gnu_debug_info_extensions
> - && TYPE_PRECISION (type) != TYPE_PRECISION (integer_type_node))
> - {
> - stabstr_S ("@s");
> - stabstr_D (TYPE_PRECISION (type));
> - stabstr_C (';');
> - }
> -
> - dbxout_range_type (type, low, high);
> - }
> -
> - else
> - {
> - /* If the size is non-standard, say what it is if we can use
> - GDB extensions. */
> -
> - if (use_gnu_debug_info_extensions
> - && TYPE_PRECISION (type) != TYPE_PRECISION (integer_type_node))
> - {
> - stabstr_S ("@s");
> - stabstr_D (TYPE_PRECISION (type));
> - stabstr_C (';');
> - }
> -
> - if (print_int_cst_bounds_in_octal_p (type, low, high))
> - {
> - stabstr_C ('r');
> -
> - /* If this type derives from another type, output type index of
> - parent type. This is particularly important when parent type
> - is an enumerated type, because not generating the parent type
> - index would transform the definition of this enumerated type
> - into a plain unsigned type. */
> - if (TREE_TYPE (type) != 0)
> - dbxout_type_index (TREE_TYPE (type));
> - else
> - dbxout_type_index (type);
> -
> - stabstr_C (';');
> - stabstr_O (low);
> - stabstr_C (';');
> - stabstr_O (high);
> - stabstr_C (';');
> - }
> -
> - else
> - /* Output other integer types as subranges of `int'. */
> - dbxout_range_type (type, low, high);
> - }
> -
> - break;
> -
> - case REAL_TYPE:
> - case FIXED_POINT_TYPE:
> - /* This used to say `r1' and we used to take care
> - to make sure that `int' was type number 1. */
> - stabstr_C ('r');
> - dbxout_type_index (integer_type_node);
> - stabstr_C (';');
> - stabstr_D (int_size_in_bytes (type));
> - stabstr_S (";0;");
> - break;
> -
> - case BOOLEAN_TYPE:
> - if (use_gnu_debug_info_extensions)
> - {
> - stabstr_S ("@s");
> - stabstr_D (BITS_PER_UNIT * int_size_in_bytes (type));
> - stabstr_S (";-16;");
> - }
> - else /* Define as enumeral type (False, True) */
> - stabstr_S ("eFalse:0,True:1,;");
> - break;
> -
> - case COMPLEX_TYPE:
> - /* Differs from the REAL_TYPE by its new data type number.
> - R3 is NF_COMPLEX. We don't try to use any of the other NF_*
> - codes since gdb doesn't care anyway. */
> -
> - if (TREE_CODE (TREE_TYPE (type)) == REAL_TYPE)
> - {
> - stabstr_S ("R3;");
> - stabstr_D (2 * int_size_in_bytes (TREE_TYPE (type)));
> - stabstr_S (";0;");
> - }
> - else
> - {
> - /* Output a complex integer type as a structure,
> - pending some other way to do it. */
> - stabstr_C ('s');
> - stabstr_D (int_size_in_bytes (type));
> -
> - stabstr_S ("real:");
> - dbxout_type (TREE_TYPE (type), 0);
> - stabstr_S (",0,");
> - stabstr_D (TYPE_PRECISION (TREE_TYPE (type)));
> -
> - stabstr_S (";imag:");
> - dbxout_type (TREE_TYPE (type), 0);
> - stabstr_C (',');
> - stabstr_D (TYPE_PRECISION (TREE_TYPE (type)));
> - stabstr_C (',');
> - stabstr_D (TYPE_PRECISION (TREE_TYPE (type)));
> - stabstr_S (";;");
> - }
> - break;
> -
> - case ARRAY_TYPE:
> - /* Make arrays of packed bits look like bitstrings for chill. */
> - if (TYPE_PACKED (type) && use_gnu_debug_info_extensions)
> - {
> - stabstr_S ("@s");
> - stabstr_D (BITS_PER_UNIT * int_size_in_bytes (type));
> - stabstr_S (";@S;S");
> - dbxout_type (TYPE_DOMAIN (type), 0);
> - break;
> - }
> -
> - /* Output "a" followed by a range type definition
> - for the index type of the array
> - followed by a reference to the target-type.
> - ar1;0;N;M for a C array of type M and size N+1. */
> - /* Check if a character string type, which in Chill is
> - different from an array of characters. */
> - if (TYPE_STRING_FLAG (type) && use_gnu_debug_info_extensions)
> - {
> - stabstr_S ("@S;");
> - }
> - tem = TYPE_DOMAIN (type);
> - if (tem == NULL)
> - {
> - stabstr_S ("ar");
> - dbxout_type_index (integer_type_node);
> - stabstr_S (";0;-1;");
> - }
> - else
> - {
> - stabstr_C ('a');
> - dbxout_range_type (tem, TYPE_MIN_VALUE (tem), TYPE_MAX_VALUE (tem));
> - }
> -
> - dbxout_type (TREE_TYPE (type), 0);
> - break;
> -
> - case VECTOR_TYPE:
> - /* Make vectors look like an array. */
> - if (use_gnu_debug_info_extensions)
> - stabstr_S ("@V;");
> -
> - /* Output "a" followed by a range type definition
> - for the index type of the array
> - followed by a reference to the target-type.
> - ar1;0;N;M for a C array of type M and size N+1. */
> - stabstr_C ('a');
> - dbxout_range_type (integer_type_node, size_zero_node,
> - size_int (TYPE_VECTOR_SUBPARTS (type) - 1));
> -
> - dbxout_type (TREE_TYPE (type), 0);
> - break;
> -
> - case RECORD_TYPE:
> - case UNION_TYPE:
> - case QUAL_UNION_TYPE:
> - {
> - tree binfo = TYPE_BINFO (type);
> -
> - /* Output a structure type. We must use the same test here as we
> - use in the DBX_NO_XREFS case above. */
> - if ((TYPE_NAME (type) != 0
> - && ! (TREE_CODE (TYPE_NAME (type)) == TYPE_DECL
> - && DECL_IGNORED_P (TYPE_NAME (type)))
> - && !full)
> - || !COMPLETE_TYPE_P (type)
> - /* No way in DBX fmt to describe a variable size. */
> - || ! tree_fits_uhwi_p (TYPE_SIZE (type)))
> - {
> - /* If the type is just a cross reference, output one
> - and mark the type as partially described.
> - If it later becomes defined, we will output
> - its real definition.
> - If the type has a name, don't nest its definition within
> - another type's definition; instead, output an xref
> - and let the definition come when the name is defined. */
> - stabstr_S ((TREE_CODE (type) == RECORD_TYPE) ? "xs" : "xu");
> - if (TYPE_IDENTIFIER (type))
> - {
> - /* Note that the C frontend creates for anonymous variable
> - length records/unions TYPE_NAME with DECL_NAME NULL. */
> - dbxout_type_name (type);
> - }
> - else
> - {
> - stabstr_S ("$$");
> - stabstr_D (anonymous_type_number++);
> - }
> -
> - stabstr_C (':');
> - typevec[TYPE_SYMTAB_ADDRESS (type)].status = TYPE_XREF;
> - break;
> - }
> -
> - /* Identify record or union, and print its size. */
> - stabstr_C ((TREE_CODE (type) == RECORD_TYPE) ? 's' : 'u');
> - stabstr_D (int_size_in_bytes (type));
> -
> - if (binfo)
> - {
> - int i;
> - tree child;
> - vec<tree, va_gc> *accesses = BINFO_BASE_ACCESSES (binfo);
> -
> - if (use_gnu_debug_info_extensions)
> - {
> - if (BINFO_N_BASE_BINFOS (binfo))
> - {
> - stabstr_C ('!');
> - stabstr_U (BINFO_N_BASE_BINFOS (binfo));
> - stabstr_C (',');
> - }
> - }
> - for (i = 0; BINFO_BASE_ITERATE (binfo, i, child); i++)
> - {
> - tree access = (accesses ? (*accesses)[i] : access_public_node);
> -
> - if (use_gnu_debug_info_extensions)
> - {
> - stabstr_C (BINFO_VIRTUAL_P (child) ? '1' : '0');
> - stabstr_C (access == access_public_node ? '2' :
> - access == access_protected_node
> - ? '1' :'0');
> - if (BINFO_VIRTUAL_P (child)
> - && (lang_GNU_CXX ()
> - || strcmp (lang_hooks.name, "GNU Objective-C++") == 0))
> - /* For a virtual base, print the (negative)
> - offset within the vtable where we must look
> - to find the necessary adjustment. */
> - stabstr_D
> - (tree_to_shwi (BINFO_VPTR_FIELD (child))
> - * BITS_PER_UNIT);
> - else
> - stabstr_D (tree_to_shwi (BINFO_OFFSET (child))
> - * BITS_PER_UNIT);
> - stabstr_C (',');
> - dbxout_type (BINFO_TYPE (child), 0);
> - stabstr_C (';');
> - }
> - else
> - {
> - /* Print out the base class information with
> - fields which have the same names at the types
> - they hold. */
> - dbxout_type_name (BINFO_TYPE (child));
> - stabstr_C (':');
> - dbxout_type (BINFO_TYPE (child), full);
> - stabstr_C (',');
> - stabstr_D (tree_to_shwi (BINFO_OFFSET (child))
> - * BITS_PER_UNIT);
> - stabstr_C (',');
> - stabstr_D
> - (tree_to_shwi (TYPE_SIZE (BINFO_TYPE (child)))
> - * BITS_PER_UNIT);
> - stabstr_C (';');
> - }
> - }
> - }
> - }
> -
> - /* Write out the field declarations. */
> - dbxout_type_fields (type);
> - if (use_gnu_debug_info_extensions)
> - dbxout_type_methods (type);
> -
> - stabstr_C (';');
> -
> - if (use_gnu_debug_info_extensions && TREE_CODE (type) == RECORD_TYPE
> - /* Avoid the ~ if we don't really need it--it confuses dbx. */
> - && TYPE_VFIELD (type))
> - {
> -
> - /* We need to write out info about what field this class
> - uses as its "main" vtable pointer field, because if this
> - field is inherited from a base class, GDB cannot necessarily
> - figure out which field it's using in time. */
> - stabstr_S ("~%");
> - dbxout_type (DECL_FCONTEXT (TYPE_VFIELD (type)), 0);
> - stabstr_C (';');
> - }
> - break;
> -
> - case ENUMERAL_TYPE:
> - /* We must use the same test here as we use in the DBX_NO_XREFS case
> - above. We simplify it a bit since an enum will never have a variable
> - size. */
> - if ((TYPE_NAME (type) != 0
> - && ! (TREE_CODE (TYPE_NAME (type)) == TYPE_DECL
> - && DECL_IGNORED_P (TYPE_NAME (type)))
> - && !full)
> - || !COMPLETE_TYPE_P (type))
> - {
> - stabstr_S ("xe");
> - dbxout_type_name (type);
> - typevec[TYPE_SYMTAB_ADDRESS (type)].status = TYPE_XREF;
> - stabstr_C (':');
> - return;
> - }
> - if (use_gnu_debug_info_extensions
> - && TYPE_PRECISION (type) != TYPE_PRECISION (integer_type_node))
> - {
> - stabstr_S ("@s");
> - stabstr_D (TYPE_PRECISION (type));
> - stabstr_C (';');
> - }
> -
> - stabstr_C ('e');
> - for (tem = TYPE_VALUES (type); tem; tem = TREE_CHAIN (tem))
> - {
> - tree value = TREE_VALUE (tem);
> -
> - stabstr_I (TREE_PURPOSE (tem));
> - stabstr_C (':');
> -
> - if (TREE_CODE (value) == CONST_DECL)
> - value = DECL_INITIAL (value);
> -
> - if (cst_and_fits_in_hwi (value))
> - stabstr_D (TREE_INT_CST_LOW (value));
> - else
> - stabstr_O (value);
> -
> - stabstr_C (',');
> - if (TREE_CHAIN (tem) != 0)
> - CONTIN;
> - }
> -
> - stabstr_C (';');
> - break;
> -
> - case POINTER_TYPE:
> - stabstr_C ('*');
> - dbxout_type (TREE_TYPE (type), 0);
> - break;
> -
> - case METHOD_TYPE:
> - if (use_gnu_debug_info_extensions)
> - {
> - stabstr_C ('#');
> -
> - /* Write the argument types out longhand. */
> - dbxout_type (TYPE_METHOD_BASETYPE (type), 0);
> - stabstr_C (',');
> - dbxout_type (TREE_TYPE (type), 0);
> - dbxout_args (TYPE_ARG_TYPES (type));
> - stabstr_C (';');
> - }
> - else
> - /* Treat it as a function type. */
> - dbxout_type (TREE_TYPE (type), 0);
> - break;
> -
> - case OFFSET_TYPE:
> - if (use_gnu_debug_info_extensions)
> - {
> - stabstr_C ('@');
> - dbxout_type (TYPE_OFFSET_BASETYPE (type), 0);
> - stabstr_C (',');
> - dbxout_type (TREE_TYPE (type), 0);
> - }
> - else
> - /* Should print as an int, because it is really just an offset. */
> - dbxout_type (integer_type_node, 0);
> - break;
> -
> - case REFERENCE_TYPE:
> - if (use_gnu_debug_info_extensions)
> - {
> - stabstr_C ('&');
> - }
> - else
> - stabstr_C ('*');
> - dbxout_type (TREE_TYPE (type), 0);
> - break;
> -
> - case FUNCTION_TYPE:
> - stabstr_C ('f');
> - dbxout_type (TREE_TYPE (type), 0);
> - break;
> -
> - default:
> - /* A C++ function with deduced return type can have a TEMPLATE_TYPE_PARM
> - named 'auto' in its type.
> - No debug info for TEMPLATE_TYPE_PARM type supported yet. */
> - if (lang_GNU_CXX ())
> - {
> - tree name = TYPE_IDENTIFIER (type);
> - if (name == get_identifier ("auto")
> - || name == get_identifier ("decltype(auto)"))
> - break;
> - }
> -
> - gcc_unreachable ();
> - }
> -}
> -
> -/* Return nonzero if the given type represents an integer whose bounds
> - should be printed in octal format. */
> -
> -static bool
> -print_int_cst_bounds_in_octal_p (tree type, tree low, tree high)
> -{
> - /* If we can use GDB extensions and the size is wider than a long
> - (the size used by GDB to read them) or we may have trouble writing
> - the bounds the usual way, write them in octal. Note the test is for
> - the *target's* size of "long", not that of the host. The host test
> - is just to make sure we can write it out in case the host wide int
> - is narrower than the target "long".
> -
> - For unsigned types, we use octal if they are the same size or larger.
> - This is because we print the bounds as signed decimal, and hence they
> - can't span same size unsigned types. */
> -
> - if (use_gnu_debug_info_extensions
> - && low && TREE_CODE (low) == INTEGER_CST
> - && high && TREE_CODE (high) == INTEGER_CST
> - && (TYPE_PRECISION (type) > TYPE_PRECISION (integer_type_node)
> - || ((TYPE_PRECISION (type) == TYPE_PRECISION (integer_type_node))
> - && TYPE_UNSIGNED (type))
> - || TYPE_PRECISION (type) > HOST_BITS_PER_WIDE_INT
> - || (TYPE_PRECISION (type) == HOST_BITS_PER_WIDE_INT
> - && TYPE_UNSIGNED (type))))
> - return TRUE;
> - else
> - return FALSE;
> -}
> -
> -/* Output the name of type TYPE, with no punctuation.
> - Such names can be set up either by typedef declarations
> - or by struct, enum and union tags. */
> -
> -static void
> -dbxout_type_name (tree type)
> -{
> - tree t = TYPE_NAME (type);
> -
> - gcc_assert (t);
> - switch (TREE_CODE (t))
> - {
> - case IDENTIFIER_NODE:
> - break;
> - case TYPE_DECL:
> - t = DECL_NAME (t);
> - break;
> - default:
> - gcc_unreachable ();
> - }
> -
> - stabstr_I (t);
> -}
> -
> -/* Output leading struct or class names needed for qualifying type
> - whose scope is limited to a struct or class. */
> -
> -static void
> -dbxout_class_name_qualifiers (tree decl)
> -{
> - tree context = decl_type_context (decl);
> -
> - if (context != NULL_TREE
> - && TREE_CODE (context) == RECORD_TYPE
> - && TYPE_NAME (context) != 0
> - && (TREE_CODE (TYPE_NAME (context)) == IDENTIFIER_NODE
> - || (DECL_NAME (TYPE_NAME (context)) != 0)))
> - {
> - tree name = TYPE_NAME (context);
> -
> - if (TREE_CODE (name) == TYPE_DECL)
> - {
> - dbxout_class_name_qualifiers (name);
> - name = DECL_NAME (name);
> - }
> - stabstr_I (name);
> - stabstr_S ("::");
> - }
> -}
> -
> -/* This is a specialized subset of expand_expr for use by dbxout_symbol in
> - evaluating DECL_VALUE_EXPR. In particular, we stop if we find decls that
> - haven't been expanded, or if the expression is getting so complex we won't
> - be able to represent it in stabs anyway. Returns NULL on failure. */
> -
> -static rtx
> -dbxout_expand_expr (tree expr)
> -{
> - switch (TREE_CODE (expr))
> - {
> - case VAR_DECL:
> - /* We can't handle emulated tls variables, because the address is an
> - offset to the return value of __emutls_get_address, and there is no
> - way to express that in stabs. Also, there are name mangling issues
> - here. We end up with references to undefined symbols if we don't
> - disable debug info for these variables. */
> - if (!targetm.have_tls && DECL_THREAD_LOCAL_P (expr))
> - return NULL;
> - if (TREE_STATIC (expr)
> - && !TREE_ASM_WRITTEN (expr)
> - && !DECL_HAS_VALUE_EXPR_P (expr)
> - && !TREE_PUBLIC (expr)
> - && DECL_RTL_SET_P (expr)
> - && MEM_P (DECL_RTL (expr)))
> - {
> - /* If this is a var that might not be actually output,
> - return NULL, otherwise stabs might reference an undefined
> - symbol. */
> - varpool_node *node = varpool_node::get (expr);
> - if (!node || !node->definition)
> - return NULL;
> - }
> - /* FALLTHRU */
> -
> - case PARM_DECL:
> - case RESULT_DECL:
> - if (DECL_HAS_VALUE_EXPR_P (expr))
> - return dbxout_expand_expr (DECL_VALUE_EXPR (expr));
> - /* FALLTHRU */
> -
> - case CONST_DECL:
> - return DECL_RTL_IF_SET (expr);
> -
> - case INTEGER_CST:
> - return expand_expr (expr, NULL_RTX, VOIDmode, EXPAND_INITIALIZER);
> -
> - case COMPONENT_REF:
> - case ARRAY_REF:
> - case ARRAY_RANGE_REF:
> - case BIT_FIELD_REF:
> - {
> - machine_mode mode;
> - poly_int64 bitsize, bitpos;
> - tree offset, tem;
> - int unsignedp, reversep, volatilep = 0;
> - rtx x;
> -
> - tem = get_inner_reference (expr, &bitsize, &bitpos, &offset, &mode,
> - &unsignedp, &reversep, &volatilep);
> -
> - x = dbxout_expand_expr (tem);
> - if (x == NULL || !MEM_P (x))
> - return NULL;
> - if (offset != NULL)
> - {
> - if (!tree_fits_shwi_p (offset))
> - return NULL;
> - x = adjust_address_nv (x, mode, tree_to_shwi (offset));
> - }
> - if (maybe_ne (bitpos, 0))
> - x = adjust_address_nv (x, mode, bits_to_bytes_round_down (bitpos));
> -
> - return x;
> - }
> -
> - default:
> - return NULL;
> - }
> -}
> -
> -/* Helper function for output_used_types. Queue one entry from the
> - used types hash to be output. */
> -
> -bool
> -output_used_types_helper (tree const &type, vec<tree> *types_p)
> -{
> - if ((TREE_CODE (type) == RECORD_TYPE
> - || TREE_CODE (type) == UNION_TYPE
> - || TREE_CODE (type) == QUAL_UNION_TYPE
> - || TREE_CODE (type) == ENUMERAL_TYPE)
> - && TYPE_STUB_DECL (type)
> - && DECL_P (TYPE_STUB_DECL (type))
> - && ! DECL_IGNORED_P (TYPE_STUB_DECL (type)))
> - types_p->quick_push (TYPE_STUB_DECL (type));
> - else if (TYPE_NAME (type)
> - && TREE_CODE (TYPE_NAME (type)) == TYPE_DECL)
> - types_p->quick_push (TYPE_NAME (type));
> -
> - return true;
> -}
> -
> -/* This is a qsort callback which sorts types and declarations into a
> - predictable order (types, then declarations, sorted by UID
> - within). */
> -
> -static int
> -output_types_sort (const void *pa, const void *pb)
> -{
> - const tree lhs = *((const tree *)pa);
> - const tree rhs = *((const tree *)pb);
> -
> - if (TYPE_P (lhs))
> - {
> - if (TYPE_P (rhs))
> - return TYPE_UID (lhs) - TYPE_UID (rhs);
> - else
> - return 1;
> - }
> - else
> - {
> - if (TYPE_P (rhs))
> - return -1;
> - else
> - return DECL_UID (lhs) - DECL_UID (rhs);
> - }
> -}
> -
> -
> -/* Force all types used by this function to be output in debug
> - information. */
> -
> -static void
> -output_used_types (void)
> -{
> - if (cfun && cfun->used_types_hash)
> - {
> - vec<tree> types;
> - int i;
> - tree type;
> -
> - types.create (cfun->used_types_hash->elements ());
> - cfun->used_types_hash->traverse<vec<tree> *, output_used_types_helper>
> - (&types);
> -
> - /* Sort by UID to prevent dependence on hash table ordering. */
> - types.qsort (output_types_sort);
> -
> - FOR_EACH_VEC_ELT (types, i, type)
> - debug_queue_symbol (type);
> -
> - types.release ();
> - }
> -}
> -
> -/* Output a .stabs for the symbol defined by DECL,
> - which must be a ..._DECL node in the normal namespace.
> - It may be a CONST_DECL, a FUNCTION_DECL, a PARM_DECL or a VAR_DECL.
> - LOCAL is nonzero if the scope is less than the entire file.
> - Return 1 if a stabs might have been emitted. */
> -
> -int
> -dbxout_symbol (tree decl, int local ATTRIBUTE_UNUSED)
> -{
> - tree type = TREE_TYPE (decl);
> - tree context = NULL_TREE;
> - int result = 0;
> - rtx decl_rtl;
> -
> - /* "Intercept" dbxout_symbol() calls like we do all debug_hooks. */
> - ++debug_nesting;
> -
> - /* Ignore nameless syms, but don't ignore type tags. */
> -
> - if ((DECL_NAME (decl) == 0 && TREE_CODE (decl) != TYPE_DECL)
> - || DECL_IGNORED_P (decl))
> - DBXOUT_DECR_NESTING_AND_RETURN (0);
> -
> - /* If we are to generate only the symbols actually used then such
> - symbol nodes are flagged with TREE_USED. Ignore any that
> - aren't flagged as TREE_USED. */
> -
> - if (flag_debug_only_used_symbols
> - && (!TREE_USED (decl)
> - && (!VAR_P (decl) || !DECL_INITIAL (decl))))
> - DBXOUT_DECR_NESTING_AND_RETURN (0);
> -
> - /* If dbxout_init has not yet run, queue this symbol for later. */
> - if (!typevec)
> - {
> - preinit_symbols = tree_cons (0, decl, preinit_symbols);
> - DBXOUT_DECR_NESTING_AND_RETURN (0);
> - }
> -
> - if (flag_debug_only_used_symbols)
> - {
> - tree t;
> -
> - /* We now have a used symbol. We need to generate the info for
> - the symbol's type in addition to the symbol itself. These
> - type symbols are queued to be generated after were done with
> - the symbol itself (otherwise they would fight over the
> - stabstr obstack).
> -
> - Note, because the TREE_TYPE(type) might be something like a
> - pointer to a named type we need to look for the first name
> - we see following the TREE_TYPE chain. */
> -
> - t = type;
> - while (POINTER_TYPE_P (t))
> - t = TREE_TYPE (t);
> -
> - /* RECORD_TYPE, UNION_TYPE, QUAL_UNION_TYPE, and ENUMERAL_TYPE
> - need special treatment. The TYPE_STUB_DECL field in these
> - types generally represents the tag name type we want to
> - output. In addition there could be a typedef type with
> - a different name. In that case we also want to output
> - that. */
> -
> - if (TREE_CODE (t) == RECORD_TYPE
> - || TREE_CODE (t) == UNION_TYPE
> - || TREE_CODE (t) == QUAL_UNION_TYPE
> - || TREE_CODE (t) == ENUMERAL_TYPE)
> - {
> - if (TYPE_STUB_DECL (t)
> - && TYPE_STUB_DECL (t) != decl
> - && DECL_P (TYPE_STUB_DECL (t))
> - && ! DECL_IGNORED_P (TYPE_STUB_DECL (t)))
> - {
> - debug_queue_symbol (TYPE_STUB_DECL (t));
> - if (TYPE_NAME (t)
> - && TYPE_NAME (t) != TYPE_STUB_DECL (t)
> - && TYPE_NAME (t) != decl
> - && DECL_P (TYPE_NAME (t)))
> - debug_queue_symbol (TYPE_NAME (t));
> - }
> - }
> - else if (TYPE_NAME (t)
> - && TYPE_NAME (t) != decl
> - && DECL_P (TYPE_NAME (t)))
> - debug_queue_symbol (TYPE_NAME (t));
> - }
> -
> - emit_pending_bincls_if_required ();
> -
> - switch (TREE_CODE (decl))
> - {
> - case CONST_DECL:
> - /* Enum values are defined by defining the enum type. */
> - break;
> -
> - case FUNCTION_DECL:
> - decl_rtl = DECL_RTL_IF_SET (decl);
> - if (!decl_rtl)
> - DBXOUT_DECR_NESTING_AND_RETURN (0);
> - if (DECL_EXTERNAL (decl))
> - break;
> - /* Don't mention a nested function under its parent. */
> - context = decl_function_context (decl);
> - if (context == current_function_decl)
> - break;
> - /* Don't mention an inline instance of a nested function. */
> - if (context && DECL_FROM_INLINE (decl))
> - break;
> - if (!MEM_P (decl_rtl)
> - || GET_CODE (XEXP (decl_rtl, 0)) != SYMBOL_REF)
> - break;
> -
> - if (flag_debug_only_used_symbols)
> - output_used_types ();
> -
> - dbxout_begin_complex_stabs ();
> - stabstr_I (DECL_ASSEMBLER_NAME (decl));
> - stabstr_S (TREE_PUBLIC (decl) ? ":F" : ":f");
> - result = 1;
> -
> - if (TREE_TYPE (type))
> - dbxout_type (TREE_TYPE (type), 0);
> - else
> - dbxout_type (void_type_node, 0);
> -
> - /* For a nested function, when that function is compiled,
> - mention the containing function name
> - as well as (since dbx wants it) our own assembler-name. */
> - if (context != 0)
> - {
> - stabstr_C (',');
> - stabstr_I (DECL_ASSEMBLER_NAME (decl));
> - stabstr_C (',');
> - stabstr_I (DECL_NAME (context));
> - }
> -
> - dbxout_finish_complex_stabs (decl, N_FUN, XEXP (decl_rtl, 0), 0, 0);
> - break;
> -
> - case TYPE_DECL:
> - /* Don't output the same typedef twice.
> - And don't output what language-specific stuff doesn't want output. */
> - if (TREE_ASM_WRITTEN (decl) || TYPE_DECL_SUPPRESS_DEBUG (decl))
> - DBXOUT_DECR_NESTING_AND_RETURN (0);
> -
> - /* Don't output typedefs for types with magic type numbers (XCOFF). */
> -#ifdef DBX_ASSIGN_FUNDAMENTAL_TYPE_NUMBER
> - {
> - int fundamental_type_number =
> - DBX_ASSIGN_FUNDAMENTAL_TYPE_NUMBER (decl);
> -
> - if (fundamental_type_number != 0)
> - {
> - TREE_ASM_WRITTEN (decl) = 1;
> - TYPE_SYMTAB_ADDRESS (TREE_TYPE (decl)) = fundamental_type_number;
> - DBXOUT_DECR_NESTING_AND_RETURN (0);
> - }
> - }
> -#endif
> - FORCE_TEXT;
> - result = 1;
> - {
> - int tag_needed = 1;
> - int did_output = 0;
> -
> - if (DECL_NAME (decl))
> - {
> - /* Nonzero means we must output a tag as well as a typedef. */
> - tag_needed = 0;
> -
> - /* Handle the case of a C++ structure or union
> - where the TYPE_NAME is a TYPE_DECL
> - which gives both a typedef name and a tag. */
> - /* dbx requires the tag first and the typedef second. */
> - if ((TREE_CODE (type) == RECORD_TYPE
> - || TREE_CODE (type) == UNION_TYPE
> - || TREE_CODE (type) == QUAL_UNION_TYPE)
> - && TYPE_NAME (type) == decl
> - && !use_gnu_debug_info_extensions
> - && !TREE_ASM_WRITTEN (TYPE_NAME (type))
> - /* Distinguish the implicit typedefs of C++
> - from explicit ones that might be found in C. */
> - && DECL_ARTIFICIAL (decl)
> - /* Do not generate a tag for incomplete records. */
> - && COMPLETE_TYPE_P (type)
> - /* Do not generate a tag for records of variable size,
> - since this type cannot be properly described in the
> - DBX format, and it confuses some tools such as objdump. */
> - && tree_fits_uhwi_p (TYPE_SIZE (type)))
> - {
> - tree name = TYPE_IDENTIFIER (type);
> -
> - dbxout_begin_complex_stabs ();
> - stabstr_I (name);
> - stabstr_S (":T");
> - dbxout_type (type, 1);
> - dbxout_finish_complex_stabs (0, DBX_TYPE_DECL_STABS_CODE,
> - 0, 0, 0);
> - }
> -
> - dbxout_begin_complex_stabs ();
> -
> - /* Output leading class/struct qualifiers. */
> - if (use_gnu_debug_info_extensions)
> - dbxout_class_name_qualifiers (decl);
> -
> - /* Output typedef name. */
> - stabstr_I (DECL_NAME (decl));
> - stabstr_C (':');
> -
> - /* Short cut way to output a tag also. */
> - if ((TREE_CODE (type) == RECORD_TYPE
> - || TREE_CODE (type) == UNION_TYPE
> - || TREE_CODE (type) == QUAL_UNION_TYPE)
> - && TYPE_NAME (type) == decl
> - /* Distinguish the implicit typedefs of C++
> - from explicit ones that might be found in C. */
> - && DECL_ARTIFICIAL (decl))
> - {
> - if (use_gnu_debug_info_extensions)
> - {
> - stabstr_C ('T');
> - TREE_ASM_WRITTEN (TYPE_NAME (type)) = 1;
> - }
> - }
> -
> - stabstr_C ('t');
> - dbxout_type (type, 1);
> - dbxout_finish_complex_stabs (decl, DBX_TYPE_DECL_STABS_CODE,
> - 0, 0, 0);
> - did_output = 1;
> - }
> -
> - /* Don't output a tag if this is an incomplete type. This prevents
> - the sun4 Sun OS 4.x dbx from crashing. */
> -
> - if (tag_needed && TYPE_NAME (type) != 0
> - && (TREE_CODE (TYPE_NAME (type)) == IDENTIFIER_NODE
> - || (DECL_NAME (TYPE_NAME (type)) != 0))
> - && COMPLETE_TYPE_P (type)
> - && !TREE_ASM_WRITTEN (TYPE_NAME (type)))
> - {
> - /* For a TYPE_DECL with no name, but the type has a name,
> - output a tag.
> - This is what represents `struct foo' with no typedef. */
> - /* In C++, the name of a type is the corresponding typedef.
> - In C, it is an IDENTIFIER_NODE. */
> - tree name = TYPE_IDENTIFIER (type);
> -
> - dbxout_begin_complex_stabs ();
> - stabstr_I (name);
> - stabstr_S (":T");
> - dbxout_type (type, 1);
> - dbxout_finish_complex_stabs (0, DBX_TYPE_DECL_STABS_CODE, 0, 0, 0);
> - did_output = 1;
> - }
> -
> - /* If an enum type has no name, it cannot be referred to, but
> - we must output it anyway, to record the enumeration
> - constants. */
> -
> - if (!did_output && TREE_CODE (type) == ENUMERAL_TYPE)
> - {
> - dbxout_begin_complex_stabs ();
> - /* Some debuggers fail when given NULL names, so give this a
> - harmless name of " " (Why not "(anon)"?). */
> - stabstr_S (" :T");
> - dbxout_type (type, 1);
> - dbxout_finish_complex_stabs (0, DBX_TYPE_DECL_STABS_CODE, 0, 0, 0);
> - }
> -
> - /* Prevent duplicate output of a typedef. */
> - TREE_ASM_WRITTEN (decl) = 1;
> - break;
> - }
> -
> - case PARM_DECL:
> - if (DECL_HAS_VALUE_EXPR_P (decl))
> - decl = DECL_VALUE_EXPR (decl);
> -
> - /* PARM_DECLs go in their own separate chain and are output by
> - dbxout_reg_parms and dbxout_parms, except for those that are
> - disguised VAR_DECLs like Out parameters in Ada. */
> - gcc_assert (VAR_P (decl));
> -
> - /* fall through */
> -
> - case RESULT_DECL:
> - case VAR_DECL:
> - /* Don't mention a variable that is external.
> - Let the file that defines it describe it. */
> - if (DECL_EXTERNAL (decl))
> - break;
> -
> - /* If the variable is really a constant
> - and not written in memory, inform the debugger.
> -
> - ??? Why do we skip emitting the type and location in this case? */
> - if (TREE_STATIC (decl) && TREE_READONLY (decl)
> - && DECL_INITIAL (decl) != 0
> - && tree_fits_shwi_p (DECL_INITIAL (decl))
> - && ! TREE_ASM_WRITTEN (decl)
> - && (DECL_FILE_SCOPE_P (decl)
> - || TREE_CODE (DECL_CONTEXT (decl)) == BLOCK
> - || TREE_CODE (DECL_CONTEXT (decl)) == NAMESPACE_DECL)
> - && TREE_PUBLIC (decl) == 0)
> - {
> - /* The sun4 assembler does not grok this. */
> -
> - if (TREE_CODE (TREE_TYPE (decl)) == INTEGER_TYPE
> - || TREE_CODE (TREE_TYPE (decl)) == ENUMERAL_TYPE)
> - {
> - HOST_WIDE_INT ival = tree_to_shwi (DECL_INITIAL (decl));
> -
> - dbxout_begin_complex_stabs ();
> - dbxout_symbol_name (decl, NULL, 'c');
> - stabstr_S ("=i");
> - stabstr_D (ival);
> - dbxout_finish_complex_stabs (0, N_LSYM, 0, 0, 0);
> - DBXOUT_DECR_NESTING;
> - return 1;
> - }
> - else
> - break;
> - }
> - /* else it is something we handle like a normal variable. */
> -
> - decl_rtl = dbxout_expand_expr (decl);
> - if (!decl_rtl)
> - DBXOUT_DECR_NESTING_AND_RETURN (0);
> -
> - if (!is_global_var (decl))
> - decl_rtl = eliminate_regs (decl_rtl, VOIDmode, NULL_RTX);
> -#ifdef LEAF_REG_REMAP
> - if (crtl->uses_only_leaf_regs)
> - leaf_renumber_regs_insn (decl_rtl);
> -#endif
> -
> - result = dbxout_symbol_location (decl, type, 0, decl_rtl);
> - break;
> -
> - default:
> - break;
> - }
> - DBXOUT_DECR_NESTING;
> - return result;
> -}
> -
> -/* Output the stab for DECL, a VAR_DECL, RESULT_DECL or PARM_DECL.
> - Add SUFFIX to its name, if SUFFIX is not 0.
> - Describe the variable as residing in HOME
> - (usually HOME is DECL_RTL (DECL), but not always).
> - Returns 1 if the stab was really emitted. */
> -
> -static int
> -dbxout_symbol_location (tree decl, tree type, const char *suffix, rtx home)
> -{
> - int letter = 0;
> - stab_code_type code;
> - rtx addr = 0;
> - int number = 0;
> - int regno = -1;
> -
> - /* Don't mention a variable at all
> - if it was completely optimized into nothingness.
> -
> - If the decl was from an inline function, then its rtl
> - is not identically the rtl that was used in this
> - particular compilation. */
> - if (GET_CODE (home) == SUBREG)
> - {
> - rtx value = home;
> -
> - while (GET_CODE (value) == SUBREG)
> - value = SUBREG_REG (value);
> - if (REG_P (value))
> - {
> - if (REGNO (value) >= FIRST_PSEUDO_REGISTER)
> - return 0;
> - }
> - home = alter_subreg (&home, true);
> - }
> - if (REG_P (home))
> - {
> - regno = REGNO (home);
> - if (regno >= FIRST_PSEUDO_REGISTER)
> - return 0;
> - }
> -
> - /* The kind-of-variable letter depends on where
> - the variable is and on the scope of its name:
> - G and N_GSYM for static storage and global scope,
> - S for static storage and file scope,
> - V for static storage and local scope,
> - for those two, use N_LCSYM if data is in bss segment,
> - N_STSYM if in data segment, N_FUN otherwise.
> - (We used N_FUN originally, then changed to N_STSYM
> - to please GDB. However, it seems that confused ld.
> - Now GDB has been fixed to like N_FUN, says Kingdon.)
> - no letter at all, and N_LSYM, for auto variable,
> - r and N_RSYM for register variable. */
> -
> - if (MEM_P (home) && GET_CODE (XEXP (home, 0)) == SYMBOL_REF)
> - {
> - if (TREE_PUBLIC (decl))
> - {
> - int offs;
> - letter = 'G';
> - code = N_GSYM;
> - if (dbxout_common_check (decl, &offs) != NULL)
> - {
> - letter = 'V';
> - addr = 0;
> - number = offs;
> - }
> - }
> - else
> - {
> - addr = XEXP (home, 0);
> -
> - letter = decl_function_context (decl) ? 'V' : 'S';
> -
> - /* Some ports can transform a symbol ref into a label ref,
> - because the symbol ref is too far away and has to be
> - dumped into a constant pool. Alternatively, the symbol
> - in the constant pool might be referenced by a different
> - symbol. */
> - if (GET_CODE (addr) == SYMBOL_REF
> - && CONSTANT_POOL_ADDRESS_P (addr))
> - {
> - bool marked;
> - rtx tmp = get_pool_constant_mark (addr, &marked);
> -
> - if (GET_CODE (tmp) == SYMBOL_REF)
> - {
> - addr = tmp;
> - if (CONSTANT_POOL_ADDRESS_P (addr))
> - get_pool_constant_mark (addr, &marked);
> - else
> - marked = true;
> - }
> - else if (GET_CODE (tmp) == LABEL_REF)
> - {
> - addr = tmp;
> - marked = true;
> - }
> -
> - /* If all references to the constant pool were optimized
> - out, we just ignore the symbol. */
> - if (!marked)
> - return 0;
> - }
> -
> - /* This should be the same condition as in assemble_variable, but
> - we don't have access to dont_output_data here. So, instead,
> - we rely on the fact that error_mark_node initializers always
> - end up in bss for C++ and never end up in bss for C. */
> - if (DECL_INITIAL (decl) == 0
> - || (lang_GNU_CXX ()
> - && DECL_INITIAL (decl) == error_mark_node))
> - {
> - int offs;
> - code = N_LCSYM;
> - if (dbxout_common_check (decl, &offs) != NULL)
> - {
> - addr = 0;
> - number = offs;
> - letter = 'V';
> - code = N_GSYM;
> - }
> - }
> - else if (DECL_IN_TEXT_SECTION (decl))
> - /* This is not quite right, but it's the closest
> - of all the codes that Unix defines. */
> - code = DBX_STATIC_CONST_VAR_CODE;
> - else
> - {
> - /* Ultrix `as' seems to need this. */
> -#ifdef DBX_STATIC_STAB_DATA_SECTION
> - switch_to_section (data_section);
> -#endif
> - code = N_STSYM;
> - }
> - }
> - }
> - else if (regno >= 0)
> - {
> - letter = 'r';
> - code = N_RSYM;
> - number = DBX_REGISTER_NUMBER (regno);
> - }
> - else if (MEM_P (home)
> - && (MEM_P (XEXP (home, 0))
> - || (REG_P (XEXP (home, 0))
> - && REGNO (XEXP (home, 0)) != HARD_FRAME_POINTER_REGNUM
> - && REGNO (XEXP (home, 0)) != STACK_POINTER_REGNUM
> -#if !HARD_FRAME_POINTER_IS_ARG_POINTER
> - && REGNO (XEXP (home, 0)) != ARG_POINTER_REGNUM
> -#endif
> - )))
> - /* If the value is indirect by memory or by a register
> - that isn't the frame pointer
> - then it means the object is variable-sized and address through
> - that register or stack slot. DBX has no way to represent this
> - so all we can do is output the variable as a pointer.
> - If it's not a parameter, ignore it. */
> - {
> - if (REG_P (XEXP (home, 0)))
> - {
> - letter = 'r';
> - code = N_RSYM;
> - if (REGNO (XEXP (home, 0)) >= FIRST_PSEUDO_REGISTER)
> - return 0;
> - number = DBX_REGISTER_NUMBER (REGNO (XEXP (home, 0)));
> - }
> - else
> - {
> - code = N_LSYM;
> - /* RTL looks like (MEM (MEM (PLUS (REG...) (CONST_INT...)))).
> - We want the value of that CONST_INT. */
> - number = DEBUGGER_AUTO_OFFSET (XEXP (XEXP (home, 0), 0));
> - }
> -
> - /* Effectively do build_pointer_type, but don't cache this type,
> - since it might be temporary whereas the type it points to
> - might have been saved for inlining. */
> - /* Don't use REFERENCE_TYPE because dbx can't handle that. */
> - type = make_node (POINTER_TYPE);
> - TREE_TYPE (type) = TREE_TYPE (decl);
> - }
> - else if (MEM_P (home)
> - && REG_P (XEXP (home, 0)))
> - {
> - code = N_LSYM;
> - number = DEBUGGER_AUTO_OFFSET (XEXP (home, 0));
> - }
> - else if (MEM_P (home)
> - && GET_CODE (XEXP (home, 0)) == PLUS
> - && CONST_INT_P (XEXP (XEXP (home, 0), 1)))
> - {
> - code = N_LSYM;
> - /* RTL looks like (MEM (PLUS (REG...) (CONST_INT...)))
> - We want the value of that CONST_INT. */
> - number = DEBUGGER_AUTO_OFFSET (XEXP (home, 0));
> - }
> - else if (MEM_P (home)
> - && GET_CODE (XEXP (home, 0)) == CONST)
> - {
> - /* Handle an obscure case which can arise when optimizing and
> - when there are few available registers. (This is *always*
> - the case for i386/i486 targets). The RTL looks like
> - (MEM (CONST ...)) even though this variable is a local `auto'
> - or a local `register' variable. In effect, what has happened
> - is that the reload pass has seen that all assignments and
> - references for one such a local variable can be replaced by
> - equivalent assignments and references to some static storage
> - variable, thereby avoiding the need for a register. In such
> - cases we're forced to lie to debuggers and tell them that
> - this variable was itself `static'. */
> - int offs;
> - code = N_LCSYM;
> - letter = 'V';
> - if (dbxout_common_check (decl, &offs) == NULL)
> - addr = XEXP (XEXP (home, 0), 0);
> - else
> - {
> - addr = 0;
> - number = offs;
> - code = N_GSYM;
> - }
> - }
> - else if (GET_CODE (home) == CONCAT)
> - {
> - tree subtype;
> -
> - /* If TYPE is not a COMPLEX_TYPE (it might be a RECORD_TYPE,
> - for example), then there is no easy way to figure out
> - what SUBTYPE should be. So, we give up. */
> - if (TREE_CODE (type) != COMPLEX_TYPE)
> - return 0;
> -
> - subtype = TREE_TYPE (type);
> -
> - /* If the variable's storage is in two parts,
> - output each as a separate stab with a modified name. */
> - if (WORDS_BIG_ENDIAN)
> - dbxout_symbol_location (decl, subtype, "$imag", XEXP (home, 0));
> - else
> - dbxout_symbol_location (decl, subtype, "$real", XEXP (home, 0));
> -
> - if (WORDS_BIG_ENDIAN)
> - dbxout_symbol_location (decl, subtype, "$real", XEXP (home, 1));
> - else
> - dbxout_symbol_location (decl, subtype, "$imag", XEXP (home, 1));
> - return 1;
> - }
> - else
> - /* Address might be a MEM, when DECL is a variable-sized object.
> - Or it might be const0_rtx, meaning previous passes
> - want us to ignore this variable. */
> - return 0;
> -
> - /* Ok, start a symtab entry and output the variable name. */
> - emit_pending_bincls_if_required ();
> - FORCE_TEXT;
> -
> -#ifdef DBX_STATIC_BLOCK_START
> - DBX_STATIC_BLOCK_START (asm_out_file, code);
> -#endif
> -
> - dbxout_begin_complex_stabs_noforcetext ();
> - dbxout_symbol_name (decl, suffix, letter);
> - dbxout_type (type, 0);
> - dbxout_finish_complex_stabs (decl, code, addr, 0, number);
> -
> -#ifdef DBX_STATIC_BLOCK_END
> - DBX_STATIC_BLOCK_END (asm_out_file, code);
> -#endif
> - return 1;
> -}
> -
> -/* Output the symbol name of DECL for a stabs, with suffix SUFFIX.
> - Then output LETTER to indicate the kind of location the symbol has. */
> -
> -static void
> -dbxout_symbol_name (tree decl, const char *suffix, int letter)
> -{
> - tree name;
> -
> - if (DECL_CONTEXT (decl)
> - && (TYPE_P (DECL_CONTEXT (decl))
> - || TREE_CODE (DECL_CONTEXT (decl)) == NAMESPACE_DECL))
> - /* One slight hitch: if this is a VAR_DECL which is a class member
> - or a namespace member, we must put out the mangled name instead of the
> - DECL_NAME. Note also that static member (variable) names DO NOT begin
> - with underscores in .stabs directives. */
> - name = DECL_ASSEMBLER_NAME (decl);
> - else
> - /* ...but if we're function-local, we don't want to include the junk
> - added by ASM_FORMAT_PRIVATE_NAME. */
> - name = DECL_NAME (decl);
> -
> - if (name)
> - stabstr_I (name);
> - else
> - stabstr_S ("(anon)");
> -
> - if (suffix)
> - stabstr_S (suffix);
> - stabstr_C (':');
> - if (letter)
> - stabstr_C (letter);
> -}
> -
> -
> -/* Output the common block name for DECL in a stabs.
> -
> - Symbols in global common (.comm) get wrapped with an N_BCOMM/N_ECOMM pair
> - around each group of symbols in the same .comm area. The N_GSYM stabs
> - that are emitted only contain the offset in the common area. This routine
> - emits the N_BCOMM and N_ECOMM stabs. */
> -
> -static void
> -dbxout_common_name (tree decl, const char *name, stab_code_type op)
> -{
> - dbxout_begin_complex_stabs ();
> - stabstr_S (name);
> - dbxout_finish_complex_stabs (decl, op, NULL_RTX, NULL, 0);
> -}
> -
> -/* Check decl to determine whether it is a VAR_DECL destined for storage in a
> - common area. If it is, the return value will be a non-null string giving
> - the name of the common storage block it will go into. If non-null, the
> - value is the offset into the common block for that symbol's storage. */
> -
> -static const char *
> -dbxout_common_check (tree decl, int *value)
> -{
> - rtx home;
> - rtx sym_addr;
> - const char *name = NULL;
> -
> - /* If the decl isn't a VAR_DECL, or if it isn't static, or if
> - it does not have a value (the offset into the common area), or if it
> - is thread local (as opposed to global) then it isn't common, and shouldn't
> - be handled as such.
> -
> - ??? DECL_THREAD_LOCAL_P check prevents problems with improper .stabs
> - for thread-local symbols. Can be handled via same mechanism as used
> - in dwarf2out.cc. */
> - if (!VAR_P (decl)
> - || !TREE_STATIC (decl)
> - || !DECL_HAS_VALUE_EXPR_P (decl)
> - || DECL_THREAD_LOCAL_P (decl)
> - || !is_fortran ())
> - return NULL;
> -
> - home = DECL_RTL (decl);
> - if (home == NULL_RTX || GET_CODE (home) != MEM)
> - return NULL;
> -
> - sym_addr = dbxout_expand_expr (DECL_VALUE_EXPR (decl));
> - if (sym_addr == NULL_RTX || GET_CODE (sym_addr) != MEM)
> - return NULL;
> -
> - sym_addr = XEXP (sym_addr, 0);
> - if (GET_CODE (sym_addr) == CONST)
> - sym_addr = XEXP (sym_addr, 0);
> - if ((GET_CODE (sym_addr) == SYMBOL_REF || GET_CODE (sym_addr) == PLUS)
> - && DECL_INITIAL (decl) == 0)
> - {
> -
> - /* We have a sym that will go into a common area, meaning that it
> - will get storage reserved with a .comm/.lcomm assembler pseudo-op.
> -
> - Determine name of common area this symbol will be an offset into,
> - and offset into that area. Also retrieve the decl for the area
> - that the symbol is offset into. */
> - tree cdecl = NULL;
> -
> - switch (GET_CODE (sym_addr))
> - {
> - case PLUS:
> - if (CONST_INT_P (XEXP (sym_addr, 0)))
> - {
> - name =
> - targetm.strip_name_encoding (XSTR (XEXP (sym_addr, 1), 0));
> - *value = INTVAL (XEXP (sym_addr, 0));
> - cdecl = SYMBOL_REF_DECL (XEXP (sym_addr, 1));
> - }
> - else
> - {
> - name =
> - targetm.strip_name_encoding (XSTR (XEXP (sym_addr, 0), 0));
> - *value = INTVAL (XEXP (sym_addr, 1));
> - cdecl = SYMBOL_REF_DECL (XEXP (sym_addr, 0));
> - }
> - break;
> -
> - case SYMBOL_REF:
> - name = targetm.strip_name_encoding (XSTR (sym_addr, 0));
> - *value = 0;
> - cdecl = SYMBOL_REF_DECL (sym_addr);
> - break;
> -
> - default:
> - error ("common symbol debug info is not structured as "
> - "symbol+offset");
> - }
> -
> - /* Check area common symbol is offset into. If this is not public, then
> - it is not a symbol in a common block. It must be a .lcomm symbol, not
> - a .comm symbol. */
> - if (cdecl == NULL || !TREE_PUBLIC (cdecl))
> - name = NULL;
> - }
> - else
> - name = NULL;
> -
> - return name;
> -}
> -
> -/* Output definitions of all the decls in a chain. Return nonzero if
> - anything was output */
> -
> -int
> -dbxout_syms (tree syms)
> -{
> - int result = 0;
> - const char *comm_prev = NULL;
> - tree syms_prev = NULL;
> -
> - while (syms)
> - {
> - int temp, copen, cclos;
> - const char *comm_new;
> -
> - /* Check for common symbol, and then progression into a new/different
> - block of common symbols. Emit closing/opening common bracket if
> - necessary. */
> - comm_new = dbxout_common_check (syms, &temp);
> - copen = comm_new != NULL
> - && (comm_prev == NULL || strcmp (comm_new, comm_prev));
> - cclos = comm_prev != NULL
> - && (comm_new == NULL || strcmp (comm_new, comm_prev));
> - if (cclos)
> - dbxout_common_name (syms_prev, comm_prev, N_ECOMM);
> - if (copen)
> - {
> - dbxout_common_name (syms, comm_new, N_BCOMM);
> - syms_prev = syms;
> - }
> - comm_prev = comm_new;
> -
> - result += dbxout_symbol (syms, 1);
> - syms = DECL_CHAIN (syms);
> - }
> -
> - if (comm_prev != NULL)
> - dbxout_common_name (syms_prev, comm_prev, N_ECOMM);
> -
> - return result;
> -}
> -
> -/* The following two functions output definitions of function parameters.
> - Each parameter gets a definition locating it in the parameter list.
> - Each parameter that is a register variable gets a second definition
> - locating it in the register.
> -
> - Printing or argument lists in gdb uses the definitions that
> - locate in the parameter list. But reference to the variable in
> - expressions uses preferentially the definition as a register. */
> -
> -/* Output definitions, referring to storage in the parmlist,
> - of all the parms in PARMS, which is a chain of PARM_DECL nodes. */
> -
> -void
> -dbxout_parms (tree parms)
> -{
> - ++debug_nesting;
> - emit_pending_bincls_if_required ();
> - fixed_size_mode rtl_mode, type_mode;
> -
> - for (; parms; parms = DECL_CHAIN (parms))
> - if (DECL_NAME (parms)
> - && TREE_TYPE (parms) != error_mark_node
> - && DECL_RTL_SET_P (parms)
> - && DECL_INCOMING_RTL (parms)
> - /* We can't represent variable-sized types in this format. */
> - && is_a <fixed_size_mode> (TYPE_MODE (TREE_TYPE (parms)), &type_mode)
> - && is_a <fixed_size_mode> (GET_MODE (DECL_RTL (parms)), &rtl_mode))
> - {
> - tree eff_type;
> - char letter;
> - stab_code_type code;
> - int number;
> -
> - /* Perform any necessary register eliminations on the parameter's rtl,
> - so that the debugging output will be accurate. */
> - DECL_INCOMING_RTL (parms)
> - = eliminate_regs (DECL_INCOMING_RTL (parms), VOIDmode, NULL_RTX);
> - SET_DECL_RTL (parms,
> - eliminate_regs (DECL_RTL (parms), VOIDmode, NULL_RTX));
> -#ifdef LEAF_REG_REMAP
> - if (crtl->uses_only_leaf_regs)
> - {
> - leaf_renumber_regs_insn (DECL_INCOMING_RTL (parms));
> - leaf_renumber_regs_insn (DECL_RTL (parms));
> - }
> -#endif
> -
> - if (PARM_PASSED_IN_MEMORY (parms))
> - {
> - rtx inrtl = XEXP (DECL_INCOMING_RTL (parms), 0);
> -
> - /* ??? Here we assume that the parm address is indexed
> - off the frame pointer or arg pointer.
> - If that is not true, we produce meaningless results,
> - but do not crash. */
> - if (GET_CODE (inrtl) == PLUS
> - && CONST_INT_P (XEXP (inrtl, 1)))
> - number = INTVAL (XEXP (inrtl, 1));
> - else
> - number = 0;
> -
> - code = N_PSYM;
> - number = DEBUGGER_ARG_OFFSET (number, inrtl);
> - letter = 'p';
> -
> - /* It is quite tempting to use TREE_TYPE (parms) instead
> - of DECL_ARG_TYPE (parms) for the eff_type, so that gcc
> - reports the actual type of the parameter, rather than
> - the promoted type. This certainly makes GDB's life
> - easier, at least for some ports. The change is a bad
> - idea however, since GDB expects to be able access the
> - type without performing any conversions. So for
> - example, if we were passing a float to an unprototyped
> - function, gcc will store a double on the stack, but if
> - we emit a stab saying the type is a float, then gdb
> - will only read in a single value, and this will produce
> - an erroneous value. */
> - eff_type = DECL_ARG_TYPE (parms);
> - }
> - else if (REG_P (DECL_RTL (parms)))
> - {
> - rtx best_rtl;
> -
> - /* Parm passed in registers and lives in registers or nowhere. */
> - code = DBX_REGPARM_STABS_CODE;
> - letter = DBX_REGPARM_STABS_LETTER;
> -
> - /* For parms passed in registers, it is better to use the
> - declared type of the variable, not the type it arrived in. */
> - eff_type = TREE_TYPE (parms);
> -
> - /* If parm lives in a register, use that register; pretend
> - the parm was passed there. It would be more consistent
> - to describe the register where the parm was passed, but
> - in practice that register usually holds something else.
> - If the parm lives nowhere, use the register where it
> - was passed. */
> - if (REGNO (DECL_RTL (parms)) < FIRST_PSEUDO_REGISTER)
> - best_rtl = DECL_RTL (parms);
> - else if (GET_CODE (DECL_INCOMING_RTL (parms)) == PARALLEL)
> - best_rtl = XEXP (XVECEXP (DECL_INCOMING_RTL (parms), 0, 0), 0);
> - else
> - best_rtl = DECL_INCOMING_RTL (parms);
> -
> - number = DBX_REGISTER_NUMBER (REGNO (best_rtl));
> - }
> - else if (MEM_P (DECL_RTL (parms))
> - && REG_P (XEXP (DECL_RTL (parms), 0))
> - && REGNO (XEXP (DECL_RTL (parms), 0)) != HARD_FRAME_POINTER_REGNUM
> - && REGNO (XEXP (DECL_RTL (parms), 0)) != STACK_POINTER_REGNUM
> -#if !HARD_FRAME_POINTER_IS_ARG_POINTER
> - && REGNO (XEXP (DECL_RTL (parms), 0)) != ARG_POINTER_REGNUM
> -#endif
> - )
> - {
> - /* Parm was passed via invisible reference.
> - That is, its address was passed in a register.
> - Output it as if it lived in that register.
> - The debugger will know from the type
> - that it was actually passed by invisible reference. */
> -
> - code = DBX_REGPARM_STABS_CODE;
> -
> - /* GDB likes this marked with a special letter. */
> - letter = (use_gnu_debug_info_extensions
> - ? 'a' : DBX_REGPARM_STABS_LETTER);
> - eff_type = TREE_TYPE (parms);
> -
> - /* DECL_RTL looks like (MEM (REG...). Get the register number.
> - If it is an unallocated pseudo-reg, then use the register where
> - it was passed instead.
> - ??? Why is DBX_REGISTER_NUMBER not used here? */
> -
> - if (REGNO (XEXP (DECL_RTL (parms), 0)) < FIRST_PSEUDO_REGISTER)
> - number = REGNO (XEXP (DECL_RTL (parms), 0));
> - else
> - number = REGNO (DECL_INCOMING_RTL (parms));
> - }
> - else if (MEM_P (DECL_RTL (parms))
> - && MEM_P (XEXP (DECL_RTL (parms), 0)))
> - {
> - /* Parm was passed via invisible reference, with the reference
> - living on the stack. DECL_RTL looks like
> - (MEM (MEM (PLUS (REG ...) (CONST_INT ...)))) or it
> - could look like (MEM (MEM (REG))). */
> -
> - code = N_PSYM;
> - letter = 'v';
> - eff_type = TREE_TYPE (parms);
> -
> - if (!REG_P (XEXP (XEXP (DECL_RTL (parms), 0), 0)))
> - number = INTVAL (XEXP (XEXP (XEXP (DECL_RTL (parms), 0), 0), 1));
> - else
> - number = 0;
> -
> - number = DEBUGGER_ARG_OFFSET (number,
> - XEXP (XEXP (DECL_RTL (parms), 0), 0));
> - }
> - else if (MEM_P (DECL_RTL (parms))
> - && XEXP (DECL_RTL (parms), 0) != const0_rtx
> - /* ??? A constant address for a parm can happen
> - when the reg it lives in is equiv to a constant in memory.
> - Should make this not happen, after 2.4. */
> - && ! CONSTANT_P (XEXP (DECL_RTL (parms), 0)))
> - {
> - /* Parm was passed in registers but lives on the stack. */
> -
> - code = N_PSYM;
> - letter = 'p';
> - eff_type = TREE_TYPE (parms);
> -
> - /* DECL_RTL looks like (MEM (PLUS (REG...) (CONST_INT...))),
> - in which case we want the value of that CONST_INT,
> - or (MEM (REG ...)),
> - in which case we use a value of zero. */
> - if (!REG_P (XEXP (DECL_RTL (parms), 0)))
> - number = INTVAL (XEXP (XEXP (DECL_RTL (parms), 0), 1));
> - else
> - number = 0;
> -
> - /* Make a big endian correction if the mode of the type of the
> - parameter is not the same as the mode of the rtl. */
> - if (BYTES_BIG_ENDIAN
> - && type_mode != rtl_mode
> - && GET_MODE_SIZE (type_mode) < UNITS_PER_WORD)
> - number += GET_MODE_SIZE (rtl_mode) - GET_MODE_SIZE (type_mode);
> - }
> - else
> - /* ??? We don't know how to represent this argument. */
> - continue;
> -
> - dbxout_begin_complex_stabs ();
> -
> - if (DECL_NAME (parms))
> - {
> - stabstr_I (DECL_NAME (parms));
> - stabstr_C (':');
> - }
> - else
> - stabstr_S ("(anon):");
> - stabstr_C (letter);
> - dbxout_type (eff_type, 0);
> - dbxout_finish_complex_stabs (parms, code, 0, 0, number);
> - }
> - DBXOUT_DECR_NESTING;
> -}
> -
> -/* Output definitions for the places where parms live during the function,
> - when different from where they were passed, when the parms were passed
> - in memory.
> -
> - It is not useful to do this for parms passed in registers
> - that live during the function in different registers, because it is
> - impossible to look in the passed register for the passed value,
> - so we use the within-the-function register to begin with.
> -
> - PARMS is a chain of PARM_DECL nodes. */
> -
> -void
> -dbxout_reg_parms (tree parms)
> -{
> - ++debug_nesting;
> -
> - for (; parms; parms = DECL_CHAIN (parms))
> - if (DECL_NAME (parms) && PARM_PASSED_IN_MEMORY (parms))
> - {
> - /* Report parms that live in registers during the function
> - but were passed in memory. */
> - if (REG_P (DECL_RTL (parms))
> - && REGNO (DECL_RTL (parms)) < FIRST_PSEUDO_REGISTER)
> - dbxout_symbol_location (parms, TREE_TYPE (parms),
> - 0, DECL_RTL (parms));
> - else if (GET_CODE (DECL_RTL (parms)) == CONCAT)
> - dbxout_symbol_location (parms, TREE_TYPE (parms),
> - 0, DECL_RTL (parms));
> - /* Report parms that live in memory but not where they were passed. */
> - else if (MEM_P (DECL_RTL (parms))
> - && ! rtx_equal_p (DECL_RTL (parms), DECL_INCOMING_RTL (parms)))
> - dbxout_symbol_location (parms, TREE_TYPE (parms),
> - 0, DECL_RTL (parms));
> - }
> - DBXOUT_DECR_NESTING;
> -}
> -
> -/* Given a chain of ..._TYPE nodes (as come in a parameter list),
> - output definitions of those names, in raw form */
> -
> -static void
> -dbxout_args (tree args)
> -{
> - while (args)
> - {
> - stabstr_C (',');
> - dbxout_type (TREE_VALUE (args), 0);
> - args = TREE_CHAIN (args);
> - }
> -}
> -
> -#if defined (DBX_DEBUGGING_INFO)
> -
> -/* Subroutine of dbxout_block. Emit an N_LBRAC stab referencing LABEL.
> - BEGIN_LABEL is the name of the beginning of the function, which may
> - be required. */
> -static void
> -dbx_output_lbrac (const char *label,
> - const char *begin_label ATTRIBUTE_UNUSED)
> -{
> - dbxout_begin_stabn (N_LBRAC);
> - if (DBX_BLOCKS_FUNCTION_RELATIVE)
> - dbxout_stab_value_label_diff (label, begin_label);
> - else
> - dbxout_stab_value_label (label);
> -}
> -
> -/* Subroutine of dbxout_block. Emit an N_RBRAC stab referencing LABEL.
> - BEGIN_LABEL is the name of the beginning of the function, which may
> - be required. */
> -static void
> -dbx_output_rbrac (const char *label,
> - const char *begin_label ATTRIBUTE_UNUSED)
> -{
> - dbxout_begin_stabn (N_RBRAC);
> - if (DBX_BLOCKS_FUNCTION_RELATIVE)
> - dbxout_stab_value_label_diff (label, begin_label);
> - else
> - dbxout_stab_value_label (label);
> -}
> -
> -/* Return true if at least one block among BLOCK, its children or siblings
> - has TREE_USED, TREE_ASM_WRITTEN and BLOCK_IN_COLD_SECTION_P
> - set. If there is none, clear TREE_USED bit on such blocks. */
> -
> -static bool
> -dbx_block_with_cold_children (tree block)
> -{
> - bool ret = false;
> - for (; block; block = BLOCK_CHAIN (block))
> - if (TREE_USED (block) && TREE_ASM_WRITTEN (block))
> - {
> - bool children = dbx_block_with_cold_children (BLOCK_SUBBLOCKS (block));
> - if (BLOCK_IN_COLD_SECTION_P (block) || children)
> - ret = true;
> - else
> - TREE_USED (block) = false;
> - }
> - return ret;
> -}
> -
> -/* Output everything about a symbol block (a BLOCK node
> - that represents a scope level),
> - including recursive output of contained blocks.
> -
> - BLOCK is the BLOCK node.
> - DEPTH is its depth within containing symbol blocks.
> - ARGS is usually zero; but for the outermost block of the
> - body of a function, it is a chain of PARM_DECLs for the function parameters.
> - We output definitions of all the register parms
> - as if they were local variables of that block.
> -
> - If -g1 was used, we count blocks just the same, but output nothing
> - except for the outermost block.
> -
> - Actually, BLOCK may be several blocks chained together.
> - We handle them all in sequence.
> -
> - Return true if we emitted any LBRAC/RBRAC. */
> -
> -static bool
> -dbxout_block (tree block, int depth, tree args, int parent_blocknum)
> -{
> - bool ret = false;
> - char begin_label[20];
> - /* Reference current function start using LFBB. */
> - ASM_GENERATE_INTERNAL_LABEL (begin_label, "LFBB", scope_labelno);
> -
> - /* If called for the second partition, ignore blocks that don't have
> - any children in the second partition. */
> - if (crtl->has_bb_partition && in_cold_section_p && depth == 0)
> - dbx_block_with_cold_children (block);
> -
> - for (; block; block = BLOCK_CHAIN (block))
> - {
> - /* Ignore blocks never expanded or otherwise marked as real. */
> - if (TREE_USED (block) && TREE_ASM_WRITTEN (block))
> - {
> - int did_output;
> - int blocknum = BLOCK_NUMBER (block);
> - int this_parent = parent_blocknum;
> -
> - /* In dbx format, the syms of a block come before the N_LBRAC.
> - If nothing is output, we don't need the N_LBRAC, either. */
> - did_output = 0;
> - if (debug_info_level != DINFO_LEVEL_TERSE || depth == 0)
> - did_output = dbxout_syms (BLOCK_VARS (block));
> - if (args)
> - dbxout_reg_parms (args);
> -
> - /* Now output an N_LBRAC symbol to represent the beginning of
> - the block. Use the block's tree-walk order to generate
> - the assembler symbols LBBn and LBEn
> - that final will define around the code in this block. */
> - if (did_output
> - && BLOCK_IN_COLD_SECTION_P (block) == in_cold_section_p)
> - {
> - char buf[20];
> - const char *scope_start;
> -
> - ret = true;
> - if (depth == 0)
> - /* The outermost block doesn't get LBB labels; use
> - the LFBB local symbol emitted by dbxout_begin_prologue. */
> - scope_start = begin_label;
> - else
> - {
> - ASM_GENERATE_INTERNAL_LABEL (buf, "LBB", blocknum);
> - scope_start = buf;
> - this_parent = blocknum;
> - }
> -
> - dbx_output_lbrac (scope_start, begin_label);
> - }
> -
> - /* Output the subblocks. */
> - bool children
> - = dbxout_block (BLOCK_SUBBLOCKS (block), depth + 1, NULL_TREE,
> - this_parent);
> - ret |= children;
> -
> - /* Refer to the marker for the end of the block. */
> - if (did_output
> - && BLOCK_IN_COLD_SECTION_P (block) == in_cold_section_p)
> - {
> - char buf[100];
> - if (depth == 0)
> - /* The outermost block doesn't get LBE labels;
> - use the "scope" label which will be emitted
> - by dbxout_function_end. */
> - ASM_GENERATE_INTERNAL_LABEL (buf, "Lscope", scope_labelno);
> - else
> - ASM_GENERATE_INTERNAL_LABEL (buf, "LBE", blocknum);
> -
> - dbx_output_rbrac (buf, begin_label);
> - }
> - else if (did_output && !children)
> - {
> - /* If we emitted any vars and didn't output any LBRAC/RBRAC,
> - either at this level or any lower level, we need to emit
> - an empty LBRAC/RBRAC pair now. */
> - char buf[30];
> - const char *scope_start;
> -
> - ret = true;
> - if (parent_blocknum == -1)
> - scope_start = begin_label;
> - else
> - {
> - ASM_GENERATE_INTERNAL_LABEL (buf, "LBB", parent_blocknum);
> - scope_start = buf;
> - }
> -
> - dbx_output_lbrac (scope_start, begin_label);
> - dbx_output_rbrac (scope_start, begin_label);
> - }
> - }
> - }
> - return ret;
> -}
> -
> -/* Output the information about a function and its arguments and result.
> - Usually this follows the function's code,
> - but on some systems, it comes before. */
> -
> -static void
> -dbxout_begin_function (tree decl)
> -{
> - int saved_tree_used1;
> -
> - saved_tree_used1 = TREE_USED (decl);
> - TREE_USED (decl) = 1;
> - if (DECL_NAME (DECL_RESULT (decl)) != 0)
> - {
> - int saved_tree_used2 = TREE_USED (DECL_RESULT (decl));
> - TREE_USED (DECL_RESULT (decl)) = 1;
> - dbxout_symbol (decl, 0);
> - TREE_USED (DECL_RESULT (decl)) = saved_tree_used2;
> - }
> - else
> - dbxout_symbol (decl, 0);
> - TREE_USED (decl) = saved_tree_used1;
> -
> - dbxout_parms (DECL_ARGUMENTS (decl));
> - if (DECL_NAME (DECL_RESULT (decl)) != 0)
> - dbxout_symbol (DECL_RESULT (decl), 1);
> -}
> -#endif /* DBX_DEBUGGING_INFO */
> -
> -#endif /* DBX_DEBUGGING_INFO || XCOFF_DEBUGGING_INFO */
> -
> -/* Record an element in the table of global destructors. SYMBOL is
> - a SYMBOL_REF of the function to be called; PRIORITY is a number
> - between 0 and MAX_INIT_PRIORITY. */
> -
> -void
> -default_stabs_asm_out_destructor (rtx symbol ATTRIBUTE_UNUSED,
> - int priority ATTRIBUTE_UNUSED)
> -{
> -#if defined DBX_DEBUGGING_INFO || defined XCOFF_DEBUGGING_INFO
> - /* Tell GNU LD that this is part of the static destructor set.
> - This will work for any system that uses stabs, most usefully
> - aout systems. */
> - dbxout_begin_simple_stabs ("___DTOR_LIST__", 22 /* N_SETT */);
> - dbxout_stab_value_label (XSTR (symbol, 0));
> -#else
> - sorry ("global destructors not supported on this target");
> -#endif
> -}
> -
> -/* Likewise for global constructors. */
> -
> -void
> -default_stabs_asm_out_constructor (rtx symbol ATTRIBUTE_UNUSED,
> - int priority ATTRIBUTE_UNUSED)
> -{
> -#if defined DBX_DEBUGGING_INFO || defined XCOFF_DEBUGGING_INFO
> - /* Tell GNU LD that this is part of the static destructor set.
> - This will work for any system that uses stabs, most usefully
> - aout systems. */
> - dbxout_begin_simple_stabs ("___CTOR_LIST__", 22 /* N_SETT */);
> - dbxout_stab_value_label (XSTR (symbol, 0));
> -#else
> - sorry ("global constructors not supported on this target");
> -#endif
> -}
> -
> -#include "gt-dbxout.h"
> diff --git a/gcc/dbxout.h b/gcc/dbxout.h
> deleted file mode 100644
> index 2c38e76c238..00000000000
> --- a/gcc/dbxout.h
> +++ /dev/null
> @@ -1,60 +0,0 @@
> -/* dbxout.h - Various declarations for functions found in dbxout.cc
> - Copyright (C) 1998-2022 Free Software Foundation, Inc.
> -
> -This file is part of GCC.
> -
> -GCC is free software; you can redistribute it and/or modify it under
> -the terms of the GNU General Public License as published by the Free
> -Software Foundation; either version 3, or (at your option) any later
> -version.
> -
> -GCC is distributed in the hope that it will be useful, but WITHOUT ANY
> -WARRANTY; without even the implied warranty of MERCHANTABILITY or
> -FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> -for more details.
> -
> -You should have received a copy of the GNU General Public License
> -along with GCC; see the file COPYING3. If not see
> -<http://www.gnu.org/licenses/>. */
> -
> -#ifndef GCC_DBXOUT_H
> -#define GCC_DBXOUT_H
> -
> -extern int dbxout_symbol (tree, int);
> -extern void dbxout_parms (tree);
> -extern void dbxout_reg_parms (tree);
> -extern int dbxout_syms (tree);
> -
> -extern void default_stabs_asm_out_destructor (rtx, int);
> -extern void default_stabs_asm_out_constructor (rtx, int);
> -
> -/* dbxout helper functions */
> -#if defined DBX_DEBUGGING_INFO || defined XCOFF_DEBUGGING_INFO
> -
> -extern void dbxout_int (int);
> -extern void dbxout_stabd (int, int);
> -extern void dbxout_begin_stabn (int);
> -extern void dbxout_begin_stabn_sline (int);
> -extern void dbxout_begin_empty_stabs (int);
> -extern void dbxout_begin_simple_stabs (const char *, int);
> -extern void dbxout_begin_simple_stabs_desc (const char *, int, int);
> -
> -extern void dbxout_stab_value_zero (void);
> -extern void dbxout_stab_value_label (const char *);
> -extern void dbxout_stab_value_label_diff (const char *, const char *);
> -extern void dbxout_stab_value_internal_label (const char *, int *);
> -extern void dbxout_stab_value_internal_label_diff (const char *, int *,
> - const char *);
> -#endif
> -
> -/* Language description for N_SO stabs. */
> -#define N_SO_AS 1
> -#define N_SO_C 2
> -#define N_SO_ANSI_C 3
> -#define N_SO_CC 4 /* c++*/
> -#define N_SO_FORTRAN 5
> -#define N_SO_FORTRAN90 7
> -#define N_SO_OBJC 50
> -#define N_SO_OBJCPLUS 51
> -
> -#endif /* GCC_DBXOUT_H */
> diff --git a/gcc/debug.h b/gcc/debug.h
> index 17a7e48624b..fe85115d5f3 100644
> --- a/gcc/debug.h
> +++ b/gcc/debug.h
> @@ -238,7 +238,6 @@ extern void debug_nothing_tree_charstar_uhwi (tree, const char *,
>
> /* Hooks for various debug formats. */
> extern const struct gcc_debug_hooks do_nothing_debug_hooks;
> -extern const struct gcc_debug_hooks dbx_debug_hooks;
> extern const struct gcc_debug_hooks xcoff_debug_hooks;
> extern const struct gcc_debug_hooks dwarf2_debug_hooks;
> extern const struct gcc_debug_hooks dwarf2_lineno_debug_hooks;
> diff --git a/gcc/doc/install.texi b/gcc/doc/install.texi
> index 9c78476374b..7df634522d2 100644
> --- a/gcc/doc/install.texi
> +++ b/gcc/doc/install.texi
> @@ -3913,8 +3913,7 @@ on FreeBSD 7 or later) and the use of @code{__cxa_atexit} by default
> by GCC 4.5 and above.
>
> We support FreeBSD using the ELF file format with DWARF 2 debugging
> -for all CPU architectures. You may use @option{-gstabs} instead of
> -@option{-g}, if you really want the old debugging format. There are
> +for all CPU architectures. There are
> no known issues with mixing object files and libraries with different
> debugging formats. Otherwise, this release of GCC should now match
> more of the configuration used in the stock FreeBSD configuration of
> diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
> index e5eb525a2c1..c9fa6e2d09e 100644
> --- a/gcc/doc/invoke.texi
> +++ b/gcc/doc/invoke.texi
> @@ -45,7 +45,7 @@ remainder. @command{g++} accepts mostly the same options as @command{gcc}.
> @c man end
> @c man begin SEEALSO
> gpl(7), gfdl(7), fsf-funding(7),
> -cpp(1), gcov(1), as(1), ld(1), gdb(1), dbx(1)
> +cpp(1), gcov(1), as(1), ld(1), gdb(1)
> and the Info entries for @file{gcc}, @file{cpp}, @file{as},
> @file{ld}, @file{binutils} and @file{gdb}.
> @c man end
> @@ -496,7 +496,7 @@ Objective-C and Objective-C++ Dialects}.
> @gccoptlist{-g -g@var{level} -gdwarf -gdwarf-@var{version} @gol
> -gbtf -gctf -gctf@var{level} @gol
> -ggdb -grecord-gcc-switches -gno-record-gcc-switches @gol
> --gstabs -gstabs+ -gstrict-dwarf -gno-strict-dwarf @gol
> +-gstrict-dwarf -gno-strict-dwarf @gol
> -gas-loc-support -gno-as-loc-support @gol
> -gas-locview-support -gno-as-locview-support @gol
> -gcolumn-info -gno-column-info -gdwarf32 -gdwarf64 @gol
> @@ -504,7 +504,7 @@ Objective-C and Objective-C++ Dialects}.
> -gvariable-location-views -gno-variable-location-views @gol
> -ginternal-reset-location-views -gno-internal-reset-location-views @gol
> -ginline-points -gno-inline-points @gol
> --gvms -gxcoff -gxcoff+ -gz@r{[}=@var{type}@r{]} @gol
> +-gvms -gz@r{[}=@var{type}@r{]} @gol
> -gsplit-dwarf -gdescribe-dies -gno-describe-dies @gol
> -fdebug-prefix-map=@var{old}=@var{new} -fdebug-types-section @gol
> -fno-eliminate-unused-debug-types @gol
> @@ -10700,10 +10700,8 @@ information.
> On most systems that use stabs format, @option{-g} enables use of extra
> debugging information that only GDB can use; this extra information
> makes debugging work better in GDB but probably makes other debuggers
> -crash or
> -refuse to read the program. If you want to control for certain whether
> -to generate the extra information, use @option{-gstabs+}, @option{-gstabs},
> -@option{-gxcoff+}, @option{-gxcoff}, or @option{-gvms} (see below).
> +crash or refuse to read the program. If you want to control for certain whether
> +to generate the extra information, use @option{-gvms} (see below).
>
> @item -ggdb
> @opindex ggdb
> @@ -10760,34 +10758,6 @@ information, but does not include type information.
> Level 2 produces type information for entities (functions, data objects etc.)
> at file-scope or global-scope only.
>
> -@item -gstabs
> -@opindex gstabs
> -Produce debugging information in stabs format (if that is supported),
> -without GDB extensions. This is the format used by DBX on most BSD
> -systems. On MIPS, Alpha and System V Release 4 systems this option
> -produces stabs debugging output that is not understood by DBX@.
> -On System V Release 4 systems this option requires the GNU assembler.
> -
> -@item -gstabs+
> -@opindex gstabs+
> -Produce debugging information in stabs format (if that is supported),
> -using GNU extensions understood only by the GNU debugger (GDB)@. The
> -use of these extensions is likely to make other debuggers crash or
> -refuse to read the program.
> -
> -@item -gxcoff
> -@opindex gxcoff
> -Produce debugging information in XCOFF format (if that is supported).
> -This is the format used by the DBX debugger on IBM RS/6000 systems.
> -
> -@item -gxcoff+
> -@opindex gxcoff+
> -Produce debugging information in XCOFF format (if that is supported),
> -using GNU extensions understood only by the GNU debugger (GDB)@. The
> -use of these extensions is likely to make other debuggers crash or
> -refuse to read the program, and may cause assemblers other than the GNU
> -assembler (GAS) to fail with an error.
> -
> @item -gvms
> @opindex gvms
> Produce debugging information in Alpha/VMS debug format (if that is
> @@ -10795,8 +10765,6 @@ supported). This is the format used by DEBUG on Alpha/VMS systems.
>
> @item -g@var{level}
> @itemx -ggdb@var{level}
> -@itemx -gstabs@var{level}
> -@itemx -gxcoff@var{level}
> @itemx -gvms@var{level}
> Request debugging information and also use @var{level} to specify how
> much information. The default level is 2.
> diff --git a/gcc/doc/passes.texi b/gcc/doc/passes.texi
> index 1e821d4e513..9e8b4f50ad6 100644
> --- a/gcc/doc/passes.texi
> +++ b/gcc/doc/passes.texi
> @@ -1184,7 +1184,7 @@ these files.
>
> This is run after final because it must output the stack slot offsets
> for pseudo registers that did not get hard registers. Source files
> -are @file{dbxout.cc} for DBX symbol table format, @file{dwarfout.c} for
> +are @file{dwarfout.c} for
> DWARF symbol table format, files @file{dwarf2out.cc} and @file{dwarf2asm.cc}
> for DWARF2 symbol table format, and @file{vmsdbgout.cc} for VMS debug
> symbol table format.
> diff --git a/gcc/doc/tm.texi b/gcc/doc/tm.texi
> index c3001c6ded9..431b414cf5d 100644
> --- a/gcc/doc/tm.texi
> +++ b/gcc/doc/tm.texi
> @@ -9919,9 +9919,6 @@ This describes how to specify debugging information.
>
> @menu
> * All Debuggers:: Macros that affect all debugging formats uniformly.
> -* DBX Options:: Macros enabling specific options in DBX format.
> -* DBX Hooks:: Hook macros for varying DBX format.
> -* File Names and DBX:: Macros controlling output of file names in DBX format.
> * DWARF:: Macros for DWARF format.
> * VMS Debug:: Macros for VMS debug format.
> * CTF Debug:: Macros for CTF debug format.
> @@ -9972,35 +9969,18 @@ having address @var{x} (an RTL expression). The nominal offset is
> A C expression that returns the type of debugging output GCC should
> produce when the user specifies just @option{-g}. Define
> this if you have arranged for GCC to support more than one format of
> -debugging output. Currently, the allowable values are @code{DBX_DEBUG},
> -@code{DWARF2_DEBUG}, @code{XCOFF_DEBUG}, @code{VMS_DEBUG},
> +debugging output. Currently, the allowable values are
> +@code{DWARF2_DEBUG}, @code{VMS_DEBUG},
> and @code{VMS_AND_DWARF2_DEBUG}.
>
> When the user specifies @option{-ggdb}, GCC normally also uses the
> value of this macro to select the debugging output format, but with two
> exceptions. If @code{DWARF2_DEBUGGING_INFO} is defined, GCC uses the
> -value @code{DWARF2_DEBUG}. Otherwise, if @code{DBX_DEBUGGING_INFO} is
> -defined, GCC uses @code{DBX_DEBUG}.
> +value @code{DWARF2_DEBUG}.
>
> The value of this macro only affects the default debugging output; the
> -user can always get a specific type of output by using @option{-gstabs},
> -@option{-gdwarf-2}, @option{-gxcoff}, or @option{-gvms}.
> -@end defmac
> -
> -@node DBX Options
> -@subsection Specific Options for DBX Output
> -
> -@c prevent bad page break with this line
> -These are specific options for DBX output.
> -
> -@defmac DBX_DEBUGGING_INFO
> -Define this macro if GCC should produce debugging output for DBX
> -in response to the @option{-g} option.
> -@end defmac
> -
> -@defmac XCOFF_DEBUGGING_INFO
> -Define this macro if GCC should produce XCOFF format debugging output
> -in response to the @option{-g} option. This is a variant of DBX format.
> +user can always get a specific type of output by using @option{-gdwarf-2},
> +or @option{-gvms}.
> @end defmac
>
> @defmac DEFAULT_GDB_EXTENSIONS
> @@ -10011,196 +9991,6 @@ macro, the default is 1: always generate the extended information
> if there is any occasion to.
> @end defmac
>
> -@defmac DEBUG_SYMS_TEXT
> -Define this macro if all @code{.stabs} commands should be output while
> -in the text section.
> -@end defmac
> -
> -@defmac ASM_STABS_OP
> -A C string constant, including spacing, naming the assembler pseudo op to
> -use instead of @code{"\t.stabs\t"} to define an ordinary debugging symbol.
> -If you don't define this macro, @code{"\t.stabs\t"} is used. This macro
> -applies only to DBX debugging information format.
> -@end defmac
> -
> -@defmac ASM_STABD_OP
> -A C string constant, including spacing, naming the assembler pseudo op to
> -use instead of @code{"\t.stabd\t"} to define a debugging symbol whose
> -value is the current location. If you don't define this macro,
> -@code{"\t.stabd\t"} is used. This macro applies only to DBX debugging
> -information format.
> -@end defmac
> -
> -@defmac ASM_STABN_OP
> -A C string constant, including spacing, naming the assembler pseudo op to
> -use instead of @code{"\t.stabn\t"} to define a debugging symbol with no
> -name. If you don't define this macro, @code{"\t.stabn\t"} is used. This
> -macro applies only to DBX debugging information format.
> -@end defmac
> -
> -@defmac DBX_NO_XREFS
> -Define this macro if DBX on your system does not support the construct
> -@samp{xs@var{tagname}}. On some systems, this construct is used to
> -describe a forward reference to a structure named @var{tagname}.
> -On other systems, this construct is not supported at all.
> -@end defmac
> -
> -@defmac DBX_CONTIN_LENGTH
> -A symbol name in DBX-format debugging information is normally
> -continued (split into two separate @code{.stabs} directives) when it
> -exceeds a certain length (by default, 80 characters). On some
> -operating systems, DBX requires this splitting; on others, splitting
> -must not be done. You can inhibit splitting by defining this macro
> -with the value zero. You can override the default splitting-length by
> -defining this macro as an expression for the length you desire.
> -@end defmac
> -
> -@defmac DBX_CONTIN_CHAR
> -Normally continuation is indicated by adding a @samp{\} character to
> -the end of a @code{.stabs} string when a continuation follows. To use
> -a different character instead, define this macro as a character
> -constant for the character you want to use. Do not define this macro
> -if backslash is correct for your system.
> -@end defmac
> -
> -@defmac DBX_STATIC_STAB_DATA_SECTION
> -Define this macro if it is necessary to go to the data section before
> -outputting the @samp{.stabs} pseudo-op for a non-global static
> -variable.
> -@end defmac
> -
> -@defmac DBX_TYPE_DECL_STABS_CODE
> -The value to use in the ``code'' field of the @code{.stabs} directive
> -for a typedef. The default is @code{N_LSYM}.
> -@end defmac
> -
> -@defmac DBX_STATIC_CONST_VAR_CODE
> -The value to use in the ``code'' field of the @code{.stabs} directive
> -for a static variable located in the text section. DBX format does not
> -provide any ``right'' way to do this. The default is @code{N_FUN}.
> -@end defmac
> -
> -@defmac DBX_REGPARM_STABS_CODE
> -The value to use in the ``code'' field of the @code{.stabs} directive
> -for a parameter passed in registers. DBX format does not provide any
> -``right'' way to do this. The default is @code{N_RSYM}.
> -@end defmac
> -
> -@defmac DBX_REGPARM_STABS_LETTER
> -The letter to use in DBX symbol data to identify a symbol as a parameter
> -passed in registers. DBX format does not customarily provide any way to
> -do this. The default is @code{'P'}.
> -@end defmac
> -
> -@defmac DBX_FUNCTION_FIRST
> -Define this macro if the DBX information for a function and its
> -arguments should precede the assembler code for the function. Normally,
> -in DBX format, the debugging information entirely follows the assembler
> -code.
> -@end defmac
> -
> -@defmac DBX_BLOCKS_FUNCTION_RELATIVE
> -Define this macro, with value 1, if the value of a symbol describing
> -the scope of a block (@code{N_LBRAC} or @code{N_RBRAC}) should be
> -relative to the start of the enclosing function. Normally, GCC uses
> -an absolute address.
> -@end defmac
> -
> -@defmac DBX_LINES_FUNCTION_RELATIVE
> -Define this macro, with value 1, if the value of a symbol indicating
> -the current line number (@code{N_SLINE}) should be relative to the
> -start of the enclosing function. Normally, GCC uses an absolute address.
> -@end defmac
> -
> -@defmac DBX_USE_BINCL
> -Define this macro if GCC should generate @code{N_BINCL} and
> -@code{N_EINCL} stabs for included header files, as on Sun systems. This
> -macro also directs GCC to output a type number as a pair of a file
> -number and a type number within the file. Normally, GCC does not
> -generate @code{N_BINCL} or @code{N_EINCL} stabs, and it outputs a single
> -number for a type number.
> -@end defmac
> -
> -@node DBX Hooks
> -@subsection Open-Ended Hooks for DBX Format
> -
> -@c prevent bad page break with this line
> -These are hooks for DBX format.
> -
> -@defmac DBX_OUTPUT_SOURCE_LINE (@var{stream}, @var{line}, @var{counter})
> -A C statement to output DBX debugging information before code for line
> -number @var{line} of the current source file to the stdio stream
> -@var{stream}. @var{counter} is the number of time the macro was
> -invoked, including the current invocation; it is intended to generate
> -unique labels in the assembly output.
> -
> -This macro should not be defined if the default output is correct, or
> -if it can be made correct by defining @code{DBX_LINES_FUNCTION_RELATIVE}.
> -@end defmac
> -
> -@defmac NO_DBX_FUNCTION_END
> -Some stabs encapsulation formats (in particular ECOFF), cannot handle the
> -@code{.stabs "",N_FUN,,0,0,Lscope-function-1} gdb dbx extension construct.
> -On those machines, define this macro to turn this feature off without
> -disturbing the rest of the gdb extensions.
> -@end defmac
> -
> -@defmac NO_DBX_BNSYM_ENSYM
> -Some assemblers cannot handle the @code{.stabd BNSYM/ENSYM,0,0} gdb dbx
> -extension construct. On those machines, define this macro to turn this
> -feature off without disturbing the rest of the gdb extensions.
> -@end defmac
> -
> -@node File Names and DBX
> -@subsection File Names in DBX Format
> -
> -@c prevent bad page break with this line
> -This describes file names in DBX format.
> -
> -@defmac DBX_OUTPUT_MAIN_SOURCE_FILENAME (@var{stream}, @var{name})
> -A C statement to output DBX debugging information to the stdio stream
> -@var{stream}, which indicates that file @var{name} is the main source
> -file---the file specified as the input file for compilation.
> -This macro is called only once, at the beginning of compilation.
> -
> -This macro need not be defined if the standard form of output
> -for DBX debugging information is appropriate.
> -
> -It may be necessary to refer to a label equal to the beginning of the
> -text section. You can use @samp{assemble_name (stream, ltext_label_name)}
> -to do so. If you do this, you must also set the variable
> -@var{used_ltext_label_name} to @code{true}.
> -@end defmac
> -
> -@defmac NO_DBX_MAIN_SOURCE_DIRECTORY
> -Define this macro, with value 1, if GCC should not emit an indication
> -of the current directory for compilation and current source language at
> -the beginning of the file.
> -@end defmac
> -
> -@defmac NO_DBX_GCC_MARKER
> -Define this macro, with value 1, if GCC should not emit an indication
> -that this object file was compiled by GCC@. The default is to emit
> -an @code{N_OPT} stab at the beginning of every source file, with
> -@samp{gcc2_compiled.} for the string and value 0.
> -@end defmac
> -
> -@defmac DBX_OUTPUT_MAIN_SOURCE_FILE_END (@var{stream}, @var{name})
> -A C statement to output DBX debugging information at the end of
> -compilation of the main source file @var{name}. Output should be
> -written to the stdio stream @var{stream}.
> -
> -If you don't define this macro, nothing special is output at the end
> -of compilation, which is correct for most machines.
> -@end defmac
> -
> -@defmac DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
> -Define this macro @emph{instead of} defining
> -@code{DBX_OUTPUT_MAIN_SOURCE_FILE_END}, if what needs to be output at
> -the end of compilation is an @code{N_SO} stab with an empty string,
> -whose value is the highest absolute text address in the file.
> -@end defmac
> -
> @need 2000
> @node DWARF
> @subsection Macros for DWARF Output
> diff --git a/gcc/doc/tm.texi.in b/gcc/doc/tm.texi.in
> index 112462310b1..de0414d6592 100644
> --- a/gcc/doc/tm.texi.in
> +++ b/gcc/doc/tm.texi.in
> @@ -6603,9 +6603,6 @@ This describes how to specify debugging information.
>
> @menu
> * All Debuggers:: Macros that affect all debugging formats uniformly.
> -* DBX Options:: Macros enabling specific options in DBX format.
> -* DBX Hooks:: Hook macros for varying DBX format.
> -* File Names and DBX:: Macros controlling output of file names in DBX format.
> * DWARF:: Macros for DWARF format.
> * VMS Debug:: Macros for VMS debug format.
> * CTF Debug:: Macros for CTF debug format.
> @@ -6656,35 +6653,18 @@ having address @var{x} (an RTL expression). The nominal offset is
> A C expression that returns the type of debugging output GCC should
> produce when the user specifies just @option{-g}. Define
> this if you have arranged for GCC to support more than one format of
> -debugging output. Currently, the allowable values are @code{DBX_DEBUG},
> -@code{DWARF2_DEBUG}, @code{XCOFF_DEBUG}, @code{VMS_DEBUG},
> +debugging output. Currently, the allowable values are
> +@code{DWARF2_DEBUG}, @code{VMS_DEBUG},
> and @code{VMS_AND_DWARF2_DEBUG}.
>
> When the user specifies @option{-ggdb}, GCC normally also uses the
> value of this macro to select the debugging output format, but with two
> exceptions. If @code{DWARF2_DEBUGGING_INFO} is defined, GCC uses the
> -value @code{DWARF2_DEBUG}. Otherwise, if @code{DBX_DEBUGGING_INFO} is
> -defined, GCC uses @code{DBX_DEBUG}.
> +value @code{DWARF2_DEBUG}.
>
> The value of this macro only affects the default debugging output; the
> -user can always get a specific type of output by using @option{-gstabs},
> -@option{-gdwarf-2}, @option{-gxcoff}, or @option{-gvms}.
> -@end defmac
> -
> -@node DBX Options
> -@subsection Specific Options for DBX Output
> -
> -@c prevent bad page break with this line
> -These are specific options for DBX output.
> -
> -@defmac DBX_DEBUGGING_INFO
> -Define this macro if GCC should produce debugging output for DBX
> -in response to the @option{-g} option.
> -@end defmac
> -
> -@defmac XCOFF_DEBUGGING_INFO
> -Define this macro if GCC should produce XCOFF format debugging output
> -in response to the @option{-g} option. This is a variant of DBX format.
> +user can always get a specific type of output by using @option{-gdwarf-2},
> +or @option{-gvms}.
> @end defmac
>
> @defmac DEFAULT_GDB_EXTENSIONS
> @@ -6695,196 +6675,6 @@ macro, the default is 1: always generate the extended information
> if there is any occasion to.
> @end defmac
>
> -@defmac DEBUG_SYMS_TEXT
> -Define this macro if all @code{.stabs} commands should be output while
> -in the text section.
> -@end defmac
> -
> -@defmac ASM_STABS_OP
> -A C string constant, including spacing, naming the assembler pseudo op to
> -use instead of @code{"\t.stabs\t"} to define an ordinary debugging symbol.
> -If you don't define this macro, @code{"\t.stabs\t"} is used. This macro
> -applies only to DBX debugging information format.
> -@end defmac
> -
> -@defmac ASM_STABD_OP
> -A C string constant, including spacing, naming the assembler pseudo op to
> -use instead of @code{"\t.stabd\t"} to define a debugging symbol whose
> -value is the current location. If you don't define this macro,
> -@code{"\t.stabd\t"} is used. This macro applies only to DBX debugging
> -information format.
> -@end defmac
> -
> -@defmac ASM_STABN_OP
> -A C string constant, including spacing, naming the assembler pseudo op to
> -use instead of @code{"\t.stabn\t"} to define a debugging symbol with no
> -name. If you don't define this macro, @code{"\t.stabn\t"} is used. This
> -macro applies only to DBX debugging information format.
> -@end defmac
> -
> -@defmac DBX_NO_XREFS
> -Define this macro if DBX on your system does not support the construct
> -@samp{xs@var{tagname}}. On some systems, this construct is used to
> -describe a forward reference to a structure named @var{tagname}.
> -On other systems, this construct is not supported at all.
> -@end defmac
> -
> -@defmac DBX_CONTIN_LENGTH
> -A symbol name in DBX-format debugging information is normally
> -continued (split into two separate @code{.stabs} directives) when it
> -exceeds a certain length (by default, 80 characters). On some
> -operating systems, DBX requires this splitting; on others, splitting
> -must not be done. You can inhibit splitting by defining this macro
> -with the value zero. You can override the default splitting-length by
> -defining this macro as an expression for the length you desire.
> -@end defmac
> -
> -@defmac DBX_CONTIN_CHAR
> -Normally continuation is indicated by adding a @samp{\} character to
> -the end of a @code{.stabs} string when a continuation follows. To use
> -a different character instead, define this macro as a character
> -constant for the character you want to use. Do not define this macro
> -if backslash is correct for your system.
> -@end defmac
> -
> -@defmac DBX_STATIC_STAB_DATA_SECTION
> -Define this macro if it is necessary to go to the data section before
> -outputting the @samp{.stabs} pseudo-op for a non-global static
> -variable.
> -@end defmac
> -
> -@defmac DBX_TYPE_DECL_STABS_CODE
> -The value to use in the ``code'' field of the @code{.stabs} directive
> -for a typedef. The default is @code{N_LSYM}.
> -@end defmac
> -
> -@defmac DBX_STATIC_CONST_VAR_CODE
> -The value to use in the ``code'' field of the @code{.stabs} directive
> -for a static variable located in the text section. DBX format does not
> -provide any ``right'' way to do this. The default is @code{N_FUN}.
> -@end defmac
> -
> -@defmac DBX_REGPARM_STABS_CODE
> -The value to use in the ``code'' field of the @code{.stabs} directive
> -for a parameter passed in registers. DBX format does not provide any
> -``right'' way to do this. The default is @code{N_RSYM}.
> -@end defmac
> -
> -@defmac DBX_REGPARM_STABS_LETTER
> -The letter to use in DBX symbol data to identify a symbol as a parameter
> -passed in registers. DBX format does not customarily provide any way to
> -do this. The default is @code{'P'}.
> -@end defmac
> -
> -@defmac DBX_FUNCTION_FIRST
> -Define this macro if the DBX information for a function and its
> -arguments should precede the assembler code for the function. Normally,
> -in DBX format, the debugging information entirely follows the assembler
> -code.
> -@end defmac
> -
> -@defmac DBX_BLOCKS_FUNCTION_RELATIVE
> -Define this macro, with value 1, if the value of a symbol describing
> -the scope of a block (@code{N_LBRAC} or @code{N_RBRAC}) should be
> -relative to the start of the enclosing function. Normally, GCC uses
> -an absolute address.
> -@end defmac
> -
> -@defmac DBX_LINES_FUNCTION_RELATIVE
> -Define this macro, with value 1, if the value of a symbol indicating
> -the current line number (@code{N_SLINE}) should be relative to the
> -start of the enclosing function. Normally, GCC uses an absolute address.
> -@end defmac
> -
> -@defmac DBX_USE_BINCL
> -Define this macro if GCC should generate @code{N_BINCL} and
> -@code{N_EINCL} stabs for included header files, as on Sun systems. This
> -macro also directs GCC to output a type number as a pair of a file
> -number and a type number within the file. Normally, GCC does not
> -generate @code{N_BINCL} or @code{N_EINCL} stabs, and it outputs a single
> -number for a type number.
> -@end defmac
> -
> -@node DBX Hooks
> -@subsection Open-Ended Hooks for DBX Format
> -
> -@c prevent bad page break with this line
> -These are hooks for DBX format.
> -
> -@defmac DBX_OUTPUT_SOURCE_LINE (@var{stream}, @var{line}, @var{counter})
> -A C statement to output DBX debugging information before code for line
> -number @var{line} of the current source file to the stdio stream
> -@var{stream}. @var{counter} is the number of time the macro was
> -invoked, including the current invocation; it is intended to generate
> -unique labels in the assembly output.
> -
> -This macro should not be defined if the default output is correct, or
> -if it can be made correct by defining @code{DBX_LINES_FUNCTION_RELATIVE}.
> -@end defmac
> -
> -@defmac NO_DBX_FUNCTION_END
> -Some stabs encapsulation formats (in particular ECOFF), cannot handle the
> -@code{.stabs "",N_FUN,,0,0,Lscope-function-1} gdb dbx extension construct.
> -On those machines, define this macro to turn this feature off without
> -disturbing the rest of the gdb extensions.
> -@end defmac
> -
> -@defmac NO_DBX_BNSYM_ENSYM
> -Some assemblers cannot handle the @code{.stabd BNSYM/ENSYM,0,0} gdb dbx
> -extension construct. On those machines, define this macro to turn this
> -feature off without disturbing the rest of the gdb extensions.
> -@end defmac
> -
> -@node File Names and DBX
> -@subsection File Names in DBX Format
> -
> -@c prevent bad page break with this line
> -This describes file names in DBX format.
> -
> -@defmac DBX_OUTPUT_MAIN_SOURCE_FILENAME (@var{stream}, @var{name})
> -A C statement to output DBX debugging information to the stdio stream
> -@var{stream}, which indicates that file @var{name} is the main source
> -file---the file specified as the input file for compilation.
> -This macro is called only once, at the beginning of compilation.
> -
> -This macro need not be defined if the standard form of output
> -for DBX debugging information is appropriate.
> -
> -It may be necessary to refer to a label equal to the beginning of the
> -text section. You can use @samp{assemble_name (stream, ltext_label_name)}
> -to do so. If you do this, you must also set the variable
> -@var{used_ltext_label_name} to @code{true}.
> -@end defmac
> -
> -@defmac NO_DBX_MAIN_SOURCE_DIRECTORY
> -Define this macro, with value 1, if GCC should not emit an indication
> -of the current directory for compilation and current source language at
> -the beginning of the file.
> -@end defmac
> -
> -@defmac NO_DBX_GCC_MARKER
> -Define this macro, with value 1, if GCC should not emit an indication
> -that this object file was compiled by GCC@. The default is to emit
> -an @code{N_OPT} stab at the beginning of every source file, with
> -@samp{gcc2_compiled.} for the string and value 0.
> -@end defmac
> -
> -@defmac DBX_OUTPUT_MAIN_SOURCE_FILE_END (@var{stream}, @var{name})
> -A C statement to output DBX debugging information at the end of
> -compilation of the main source file @var{name}. Output should be
> -written to the stdio stream @var{stream}.
> -
> -If you don't define this macro, nothing special is output at the end
> -of compilation, which is correct for most machines.
> -@end defmac
> -
> -@defmac DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
> -Define this macro @emph{instead of} defining
> -@code{DBX_OUTPUT_MAIN_SOURCE_FILE_END}, if what needs to be output at
> -the end of compilation is an @code{N_SO} stab with an empty string,
> -whose value is the highest absolute text address in the file.
> -@end defmac
> -
> @need 2000
> @node DWARF
> @subsection Macros for DWARF Output
> diff --git a/gcc/dwarf2asm.cc b/gcc/dwarf2asm.cc
> index 274f574f25e..7eac83f7b0f 100644
> --- a/gcc/dwarf2asm.cc
> +++ b/gcc/dwarf2asm.cc
> @@ -35,10 +35,6 @@ along with GCC; see the file COPYING3. If not see
> #include "emit-rtl.h"
> #include "fold-const.h"
>
> -#ifndef XCOFF_DEBUGGING_INFO
> -#define XCOFF_DEBUGGING_INFO 0
> -#endif
> -
>
> /* Output an unaligned integer with the given value and size. Prefer not
> to print a newline, since the caller may want to add a comment. */
> @@ -384,16 +380,13 @@ dw2_asm_output_nstring (const char *str, size_t orig_len,
>
> if (flag_debug_asm && comment)
> {
> - if (XCOFF_DEBUGGING_INFO)
> - fputs ("\t.byte \"", asm_out_file);
> - else
> - fputs ("\t.ascii \"", asm_out_file);
> + fputs ("\t.ascii \"", asm_out_file);
>
> for (i = 0; i < len; i++)
> {
> int c = str[i];
> if (c == '\"')
> - fputc (XCOFF_DEBUGGING_INFO ? '\"' : '\\', asm_out_file);
> + fputc ('\\', asm_out_file);
> else if (c == '\\')
> fputc ('\\', asm_out_file);
> if (ISPRINT (c))
> @@ -913,7 +906,7 @@ static GTY(()) hash_map<const char *, tree> *indirect_pool;
> static GTY(()) int dw2_const_labelno;
>
> #if defined(HAVE_GAS_HIDDEN)
> -# define USE_LINKONCE_INDIRECT (SUPPORTS_ONE_ONLY && !XCOFF_DEBUGGING_INFO)
> +# define USE_LINKONCE_INDIRECT (SUPPORTS_ONE_ONLY)
> #else
> # define USE_LINKONCE_INDIRECT 0
> #endif
> diff --git a/gcc/dwarf2out.cc b/gcc/dwarf2out.cc
> index 28a4ae08fe4..9e2fa9681a0 100644
> --- a/gcc/dwarf2out.cc
> +++ b/gcc/dwarf2out.cc
> @@ -105,14 +105,6 @@ static rtx_insn *cached_next_real_insn;
> static void dwarf2out_decl (tree);
> static bool is_redundant_typedef (const_tree);
>
> -#ifndef XCOFF_DEBUGGING_INFO
> -#define XCOFF_DEBUGGING_INFO 0
> -#endif
> -
> -#ifndef HAVE_XCOFF_DWARF_EXTRAS
> -#define HAVE_XCOFF_DWARF_EXTRAS 0
> -#endif
> -
> #ifdef VMS_DEBUGGING_INFO
> int vms_file_stats_name (const char *, long long *, long *, char *, int *);
>
> @@ -608,14 +600,11 @@ output_fde (dw_fde_ref fde, bool for_eh, bool second,
> for_eh + j);
> ASM_GENERATE_INTERNAL_LABEL (l1, FDE_AFTER_SIZE_LABEL, for_eh + j);
> ASM_GENERATE_INTERNAL_LABEL (l2, FDE_END_LABEL, for_eh + j);
> - if (!XCOFF_DEBUGGING_INFO || for_eh)
> - {
> - if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4 && !for_eh)
> - dw2_asm_output_data (4, 0xffffffff, "Initial length escape value"
> - " indicating 64-bit DWARF extension");
> - dw2_asm_output_delta (for_eh ? 4 : dwarf_offset_size, l2, l1,
> - "FDE Length");
> - }
> + if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4 && !for_eh)
> + dw2_asm_output_data (4, 0xffffffff, "Initial length escape value"
> + " indicating 64-bit DWARF extension");
> + dw2_asm_output_delta (for_eh ? 4 : dwarf_offset_size, l2, l1,
> + "FDE Length");
> ASM_OUTPUT_LABEL (asm_out_file, l1);
>
> if (for_eh)
> @@ -812,14 +801,11 @@ output_call_frame_info (int for_eh)
> /* Output the CIE. */
> ASM_GENERATE_INTERNAL_LABEL (l1, CIE_AFTER_SIZE_LABEL, for_eh);
> ASM_GENERATE_INTERNAL_LABEL (l2, CIE_END_LABEL, for_eh);
> - if (!XCOFF_DEBUGGING_INFO || for_eh)
> - {
> - if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4 && !for_eh)
> - dw2_asm_output_data (4, 0xffffffff,
> - "Initial length escape value indicating 64-bit DWARF extension");
> - dw2_asm_output_delta (for_eh ? 4 : dwarf_offset_size, l2, l1,
> - "Length of Common Information Entry");
> - }
> + if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4 && !for_eh)
> + dw2_asm_output_data (4, 0xffffffff,
> + "Initial length escape value indicating 64-bit DWARF extension");
> + dw2_asm_output_delta (for_eh ? 4 : dwarf_offset_size, l2, l1,
> + "Length of Common Information Entry");
> ASM_OUTPUT_LABEL (asm_out_file, l1);
>
> /* Now that the CIE pointer is PC-relative for EH,
> @@ -3679,8 +3665,7 @@ static GTY (()) vec<macinfo_entry, va_gc> *macinfo_table;
> /* True if .debug_macinfo or .debug_macros section is going to be
> emitted. */
> #define have_macinfo \
> - ((!XCOFF_DEBUGGING_INFO || HAVE_XCOFF_DWARF_EXTRAS) \
> - && debug_info_level >= DINFO_LEVEL_VERBOSE \
> + (debug_info_level >= DINFO_LEVEL_VERBOSE \
> && !macinfo_table->is_empty ())
>
> /* Vector of dies for which we should generate .debug_ranges info. */
> @@ -4982,9 +4967,6 @@ add_AT_loc_list (dw_die_ref die, enum dwarf_attribute attr_kind, dw_loc_list_ref
> {
> dw_attr_node attr;
>
> - if (XCOFF_DEBUGGING_INFO && !HAVE_XCOFF_DWARF_EXTRAS)
> - return;
> -
> attr.dw_attr = attr_kind;
> attr.dw_attr_val.val_class = dw_val_class_loc_list;
> attr.dw_attr_val.val_entry = NULL;
> @@ -5008,9 +4990,6 @@ add_AT_view_list (dw_die_ref die, enum dwarf_attribute attr_kind)
> {
> dw_attr_node attr;
>
> - if (XCOFF_DEBUGGING_INFO && !HAVE_XCOFF_DWARF_EXTRAS)
> - return;
> -
> attr.dw_attr = attr_kind;
> attr.dw_attr_val.val_class = dw_val_class_view_list;
> attr.dw_attr_val.val_entry = NULL;
> @@ -11166,15 +11145,12 @@ output_dwarf_version ()
> static void
> output_compilation_unit_header (enum dwarf_unit_type ut)
> {
> - if (!XCOFF_DEBUGGING_INFO)
> - {
> - if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4)
> - dw2_asm_output_data (4, 0xffffffff,
> - "Initial length escape value indicating 64-bit DWARF extension");
> - dw2_asm_output_data (dwarf_offset_size,
> - next_die_offset - DWARF_INITIAL_LENGTH_SIZE,
> - "Length of Compilation Unit Info");
> - }
> + if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4)
> + dw2_asm_output_data (4, 0xffffffff,
> + "Initial length escape value indicating 64-bit DWARF extension");
> + dw2_asm_output_data (dwarf_offset_size,
> + next_die_offset - DWARF_INITIAL_LENGTH_SIZE,
> + "Length of Compilation Unit Info");
>
> output_dwarf_version ();
> if (dwarf_version >= 5)
> @@ -11683,14 +11659,11 @@ output_pubnames (vec<pubname_entry, va_gc> *names)
> unsigned long pubnames_length = size_of_pubnames (names);
> pubname_entry *pub;
>
> - if (!XCOFF_DEBUGGING_INFO)
> - {
> - if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4)
> - dw2_asm_output_data (4, 0xffffffff,
> - "Initial length escape value indicating 64-bit DWARF extension");
> - dw2_asm_output_data (dwarf_offset_size, pubnames_length,
> - "Pub Info Length");
> - }
> + if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4)
> + dw2_asm_output_data (4, 0xffffffff,
> + "Initial length escape value indicating 64-bit DWARF extension");
> + dw2_asm_output_data (dwarf_offset_size, pubnames_length,
> + "Pub Info Length");
>
> /* Version number for pubnames/pubtypes is independent of dwarf version. */
> dw2_asm_output_data (2, 2, "DWARF pubnames/pubtypes version");
> @@ -11765,14 +11738,11 @@ output_aranges (void)
> unsigned i;
> unsigned long aranges_length = size_of_aranges ();
>
> - if (!XCOFF_DEBUGGING_INFO)
> - {
> - if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4)
> - dw2_asm_output_data (4, 0xffffffff,
> - "Initial length escape value indicating 64-bit DWARF extension");
> - dw2_asm_output_data (dwarf_offset_size, aranges_length,
> - "Length of Address Ranges Info");
> - }
> + if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4)
> + dw2_asm_output_data (4, 0xffffffff,
> + "Initial length escape value indicating 64-bit DWARF extension");
> + dw2_asm_output_data (dwarf_offset_size, aranges_length,
> + "Length of Address Ranges Info");
>
> /* Version number for aranges is still 2, even up to DWARF5. */
> dw2_asm_output_data (2, 2, "DWARF aranges version");
> @@ -13066,14 +13036,11 @@ output_line_info (bool prologue_only)
> ASM_GENERATE_INTERNAL_LABEL (p2, LN_PROLOG_END_LABEL,
> output_line_info_generation++);
>
> - if (!XCOFF_DEBUGGING_INFO)
> - {
> - if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4)
> - dw2_asm_output_data (4, 0xffffffff,
> - "Initial length escape value indicating 64-bit DWARF extension");
> - dw2_asm_output_delta (dwarf_offset_size, l2, l1,
> - "Length of Source Line Info");
> - }
> + if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4)
> + dw2_asm_output_data (4, 0xffffffff,
> + "Initial length escape value indicating 64-bit DWARF extension");
> + dw2_asm_output_delta (dwarf_offset_size, l2, l1,
> + "Length of Source Line Info");
>
> ASM_OUTPUT_LABEL (asm_out_file, l1);
>
> @@ -29144,8 +29111,6 @@ output_macinfo (const char *debug_line_label, bool early_lto_debug)
> /* AIX Assembler inserts the length, so adjust the reference to match the
> offset expected by debuggers. */
> strcpy (dl_section_ref, debug_line_label);
> - if (XCOFF_DEBUGGING_INFO)
> - strcat (dl_section_ref, DWARF_INITIAL_LENGTH_SIZE_STR);
>
> /* For .debug_macro emit the section header. */
> if (!dwarf_strict || dwarf_version >= 5)
> @@ -32350,8 +32315,6 @@ dwarf2out_finish (const char *filename)
> /* AIX Assembler inserts the length, so adjust the reference to match the
> offset expected by debuggers. */
> strcpy (dl_section_ref, debug_line_section_label);
> - if (XCOFF_DEBUGGING_INFO)
> - strcat (dl_section_ref, DWARF_INITIAL_LENGTH_SIZE_STR);
>
> if (debug_info_level >= DINFO_LEVEL_TERSE)
> add_AT_lineptr (main_comp_unit_die, DW_AT_stmt_list,
> @@ -33067,8 +33030,6 @@ dwarf2out_early_finish (const char *filename)
> /* AIX Assembler inserts the length, so adjust the reference to match the
> offset expected by debuggers. */
> strcpy (dl_section_ref, debug_line_section_label);
> - if (XCOFF_DEBUGGING_INFO)
> - strcat (dl_section_ref, DWARF_INITIAL_LENGTH_SIZE_STR);
>
> if (debug_info_level >= DINFO_LEVEL_TERSE)
> add_AT_lineptr (comp_unit_die (), DW_AT_stmt_list, dl_section_ref);
> diff --git a/gcc/final.cc b/gcc/final.cc
> index 0352786e49b..c0bfdf6c7bf 100644
> --- a/gcc/final.cc
> +++ b/gcc/final.cc
> @@ -83,16 +83,8 @@ along with GCC; see the file COPYING3. If not see
> #include "function-abi.h"
> #include "common/common-target.h"
>
> -#ifdef XCOFF_DEBUGGING_INFO
> -#include "xcoffout.h" /* Needed for external data declarations. */
> -#endif
> -
> #include "dwarf2out.h"
>
> -#ifdef DBX_DEBUGGING_INFO
> -#include "dbxout.h"
> -#endif
> -
> /* Most ports don't need to define CC_STATUS_INIT.
> So define a null default for it to save conditionalization later. */
> #ifndef CC_STATUS_INIT
> @@ -2324,19 +2316,6 @@ final_scan_insn_1 (rtx_insn *insn, FILE *file, int optimize_p ATTRIBUTE_UNUSED,
> TREE_ASM_WRITTEN (NOTE_BLOCK (insn)) = 1;
> BLOCK_IN_COLD_SECTION_P (NOTE_BLOCK (insn)) = in_cold_section_p;
> }
> - if (write_symbols == DBX_DEBUG)
> - {
> - location_t *locus_ptr
> - = block_nonartificial_location (NOTE_BLOCK (insn));
> -
> - if (locus_ptr != NULL)
> - {
> - override_filename = LOCATION_FILE (*locus_ptr);
> - override_linenum = LOCATION_LINE (*locus_ptr);
> - override_columnnum = LOCATION_COLUMN (*locus_ptr);
> - override_discriminator = compute_discriminator (*locus_ptr);
> - }
> - }
> break;
>
> case NOTE_INSN_BLOCK_END:
> @@ -2359,27 +2338,6 @@ final_scan_insn_1 (rtx_insn *insn, FILE *file, int optimize_p ATTRIBUTE_UNUSED,
> gcc_assert (BLOCK_IN_COLD_SECTION_P (NOTE_BLOCK (insn))
> == in_cold_section_p);
> }
> - if (write_symbols == DBX_DEBUG)
> - {
> - tree outer_block = BLOCK_SUPERCONTEXT (NOTE_BLOCK (insn));
> - location_t *locus_ptr
> - = block_nonartificial_location (outer_block);
> -
> - if (locus_ptr != NULL)
> - {
> - override_filename = LOCATION_FILE (*locus_ptr);
> - override_linenum = LOCATION_LINE (*locus_ptr);
> - override_columnnum = LOCATION_COLUMN (*locus_ptr);
> - override_discriminator = compute_discriminator (*locus_ptr);
> - }
> - else
> - {
> - override_filename = NULL;
> - override_linenum = 0;
> - override_columnnum = 0;
> - override_discriminator = 0;
> - }
> - }
> break;
>
> case NOTE_INSN_DELETED_LABEL:
> @@ -4304,8 +4262,6 @@ rest_of_handle_final (void)
> if (! quiet_flag)
> fflush (asm_out_file);
>
> - /* Write DBX symbols if requested. */
> -
> /* Note that for those inline functions where we don't initially
> know for certain that we will be generating an out-of-line copy,
> the first invocation of this routine (rest_of_compilation) will
> diff --git a/gcc/flag-types.h b/gcc/flag-types.h
> index a11f99af887..d2e751060ff 100644
> --- a/gcc/flag-types.h
> +++ b/gcc/flag-types.h
> @@ -24,24 +24,18 @@ along with GCC; see the file COPYING3. If not see
>
> enum debug_info_type
> {
> - DINFO_TYPE_NONE = 0, /* No debug info. */
> - DINFO_TYPE_DBX = 1, /* BSD .stabs for DBX. */
> - DINFO_TYPE_DWARF2 = 2, /* Dwarf v2 debug info. */
> - DINFO_TYPE_XCOFF = 3, /* IBM/Xcoff debug info. */
> - DINFO_TYPE_VMS = 4, /* VMS debug info. */
> - DINFO_TYPE_CTF = 5, /* CTF debug info. */
> - DINFO_TYPE_BTF = 6, /* BTF debug info. */
> - DINFO_TYPE_BTF_WITH_CORE = 7, /* BTF debug info with CO-RE relocations. */
> + DINFO_TYPE_NONE, /* No debug info. */
> + DINFO_TYPE_DWARF2, /* Dwarf v2 debug info. */
> + DINFO_TYPE_VMS, /* VMS debug info. */
> + DINFO_TYPE_CTF, /* CTF debug info. */
> + DINFO_TYPE_BTF, /* BTF debug info. */
> + DINFO_TYPE_BTF_WITH_CORE, /* BTF debug info with CO-RE relocations. */
> DINFO_TYPE_MAX = DINFO_TYPE_BTF_WITH_CORE /* Marker only. */
> };
>
> #define NO_DEBUG (0U)
> -/* Write DBX debug info (using dbxout.cc). */
> -#define DBX_DEBUG (1U << DINFO_TYPE_DBX)
> /* Write DWARF2 debug info (using dwarf2out.cc). */
> #define DWARF2_DEBUG (1U << DINFO_TYPE_DWARF2)
> -/* Write IBM/XCOFF debug info (using dbxout.cc). */
> -#define XCOFF_DEBUG (1U << DINFO_TYPE_XCOFF)
> /* Write VMS debug info (using vmsdbgout.cc). */
> #define VMS_DEBUG (1U << DINFO_TYPE_VMS)
> /* Write CTF debug info (using ctfout.cc). */
> diff --git a/gcc/function.cc b/gcc/function.cc
> index 31256b57197..5498a712c4a 100644
> --- a/gcc/function.cc
> +++ b/gcc/function.cc
> @@ -4639,14 +4639,6 @@ number_blocks (tree fn)
> int n_blocks;
> tree *block_vector;
>
> - /* For XCOFF debugging output, we start numbering the blocks
> - from 1 within each function, rather than keeping a running
> - count. */
> -#if defined (XCOFF_DEBUGGING_INFO)
> - if (write_symbols == XCOFF_DEBUG)
> - next_block_index = 1;
> -#endif
> -
> block_vector = get_block_vector (DECL_INITIAL (fn), &n_blocks);
>
> /* The top-level BLOCK isn't numbered at all. */
> diff --git a/gcc/gcc.cc b/gcc/gcc.cc
> index b6d562a92f0..c1f084bdf6b 100644
> --- a/gcc/gcc.cc
> +++ b/gcc/gcc.cc
> @@ -927,26 +927,11 @@ proper position among the other output files. */
> # else
> # define ASM_DEBUG_DWARF_OPTION "--gdwarf2"
> # endif
> -# if defined(DBX_DEBUGGING_INFO) && defined(DWARF2_DEBUGGING_INFO) \
> - && defined(HAVE_AS_GDWARF2_DEBUG_FLAG) && defined(HAVE_AS_GSTABS_DEBUG_FLAG)
> -# define ASM_DEBUG_SPEC \
> - (PREFERRED_DEBUGGING_TYPE == DBX_DEBUG \
> - ? "%{%:debug-level-gt(0):" \
> - "%{gdwarf*:" ASM_DEBUG_DWARF_OPTION "};" \
> - ":%{g*:--gstabs}}" ASM_MAP \
> - : "%{%:debug-level-gt(0):" \
> - "%{gstabs*:--gstabs;" \
> - ":%{g*:" ASM_DEBUG_DWARF_OPTION "}}}" ASM_MAP)
> -# else
> -# if defined(DBX_DEBUGGING_INFO) && defined(HAVE_AS_GSTABS_DEBUG_FLAG)
> -# define ASM_DEBUG_SPEC "%{g*:%{%:debug-level-gt(0):--gstabs}}" ASM_MAP
> -# endif
> # if defined(DWARF2_DEBUGGING_INFO) && defined(HAVE_AS_GDWARF2_DEBUG_FLAG)
> # define ASM_DEBUG_SPEC "%{g*:%{%:debug-level-gt(0):" \
> ASM_DEBUG_DWARF_OPTION "}}" ASM_MAP
> # endif
> # endif
> -#endif
> #ifndef ASM_DEBUG_SPEC
> # define ASM_DEBUG_SPEC ""
> #endif
> @@ -960,14 +945,7 @@ proper position among the other output files. */
> "%:dwarf-version-gt(3):--gdwarf-4 ;" \
> "%:dwarf-version-gt(2):--gdwarf-3 ;" \
> ":--gdwarf2 }"
> -# if defined(DBX_DEBUGGING_INFO) && defined(DWARF2_DEBUGGING_INFO)
> -# define ASM_DEBUG_OPTION_SPEC \
> - (PREFERRED_DEBUGGING_TYPE == DBX_DEBUG \
> - ? "%{%:debug-level-gt(0):" \
> - "%{gdwarf*:" ASM_DEBUG_OPTION_DWARF_OPT "}}" \
> - : "%{%:debug-level-gt(0):" \
> - "%{!gstabs*:%{g*:" ASM_DEBUG_OPTION_DWARF_OPT "}}}")
> -# elif defined(DWARF2_DEBUGGING_INFO)
> +# if defined(DWARF2_DEBUGGING_INFO)
> # define ASM_DEBUG_OPTION_SPEC "%{g*:%{%:debug-level-gt(0):" \
> ASM_DEBUG_OPTION_DWARF_OPT "}}"
> # endif
> diff --git a/gcc/go/go-lang.cc b/gcc/go/go-lang.cc
> index 84cd623bbf8..d519a69e647 100644
> --- a/gcc/go/go-lang.cc
> +++ b/gcc/go/go-lang.cc
> @@ -507,8 +507,7 @@ go_langhook_pushdecl (tree decl ATTRIBUTE_UNUSED)
> }
>
> /* This hook is used to get the current list of declarations as trees.
> - We don't support that; instead we use the write_globals hook. This
> - can't simply crash because it is called by -gstabs. */
> + We don't support that; instead we use the write_globals hook. */
>
> static tree
> go_langhook_getdecls (void)
> diff --git a/gcc/go/gospec.cc b/gcc/go/gospec.cc
> index df92b62d8e6..1e514076803 100644
> --- a/gcc/go/gospec.cc
> +++ b/gcc/go/gospec.cc
> @@ -215,11 +215,7 @@ lang_specific_driver (struct cl_decoded_option **in_decoded_options,
> case OPT_gdwarf:
> case OPT_gdwarf_:
> case OPT_ggdb:
> - case OPT_gstabs:
> - case OPT_gstabs_:
> case OPT_gvms:
> - case OPT_gxcoff:
> - case OPT_gxcoff_:
> saw_opt_g = true;
> break;
>
> diff --git a/gcc/gstab.h b/gcc/gstab.h
> deleted file mode 100644
> index c597d1200b4..00000000000
> --- a/gcc/gstab.h
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -/* Copyright (C) 1997-2022 Free Software Foundation, Inc.
> -
> -This file is part of GCC.
> -
> -GCC is free software; you can redistribute it and/or modify it under
> -the terms of the GNU General Public License as published by the Free
> -Software Foundation; either version 3, or (at your option) any later
> -version.
> -
> -GCC is distributed in the hope that it will be useful, but WITHOUT ANY
> -WARRANTY; without even the implied warranty of MERCHANTABILITY or
> -FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> -for more details.
> -
> -You should have received a copy of the GNU General Public License
> -along with GCC; see the file COPYING3. If not see
> -<http://www.gnu.org/licenses/>. */
> -
> -#ifndef GCC_GSTAB_H
> -#define GCC_GSTAB_H
> -
> -#define __define_stab(NAME, CODE, STRING) NAME=CODE,
> -
> -enum
> -{
> -#include "stab.def"
> -LAST_UNUSED_STAB_CODE
> -};
> -
> -/* stabs debug codes really are integers with expressive names. */
> -typedef int stab_code_type;
> -
> -#undef __define_stab
> -
> -#endif /* ! GCC_GSTAB_H */
> diff --git a/gcc/opts.cc b/gcc/opts.cc
> index 54e57f36755..e058aaf3697 100644
> --- a/gcc/opts.cc
> +++ b/gcc/opts.cc
> @@ -53,7 +53,7 @@ const char *const debug_type_names[] =
>
> static uint32_t debug_type_masks[] =
> {
> - NO_DEBUG, DBX_DEBUG, DWARF2_DEBUG, XCOFF_DEBUG, VMS_DEBUG,
> + NO_DEBUG, DWARF2_DEBUG, VMS_DEBUG,
> CTF_DEBUG, BTF_DEBUG
> };
>
> @@ -3145,22 +3145,10 @@ common_handle_option (struct gcc_options *opts,
> set_debug_level (NO_DEBUG, 2, arg, opts, opts_set, loc);
> break;
>
> - case OPT_gstabs:
> - case OPT_gstabs_:
> - set_debug_level (DBX_DEBUG, code == OPT_gstabs_, arg, opts, opts_set,
> - loc);
> - break;
> -
> case OPT_gvms:
> set_debug_level (VMS_DEBUG, false, arg, opts, opts_set, loc);
> break;
>
> - case OPT_gxcoff:
> - case OPT_gxcoff_:
> - set_debug_level (XCOFF_DEBUG, code == OPT_gxcoff_, arg, opts, opts_set,
> - loc);
> - break;
> -
> case OPT_gz:
> case OPT_gz_:
> /* Handled completely via specs. */
> @@ -3363,8 +3351,6 @@ set_debug_level (uint32_t dinfo, int extended, const char *arg,
> struct gcc_options *opts, struct gcc_options *opts_set,
> location_t loc)
> {
> - opts->x_use_gnu_debug_info_extensions = extended;
> -
> if (dinfo == NO_DEBUG)
> {
> if (opts->x_write_symbols == NO_DEBUG)
> @@ -3378,8 +3364,6 @@ set_debug_level (uint32_t dinfo, int extended, const char *arg,
> opts->x_write_symbols |= DWARF2_DEBUG;
> else
> opts->x_write_symbols = DWARF2_DEBUG;
> -#elif defined DBX_DEBUGGING_INFO
> - opts->x_write_symbols = DBX_DEBUG;
> #endif
> }
>
> diff --git a/gcc/stab.def b/gcc/stab.def
> deleted file mode 100644
> index e5af19b2bd8..00000000000
> --- a/gcc/stab.def
> +++ /dev/null
> @@ -1,239 +0,0 @@
> -/* Table of DBX symbol codes for the GNU system.
> - Copyright (C) 1988-2022 Free Software Foundation, Inc.
> - This file is part of the GNU C Library.
> -
> - The GNU C Library is free software; you can redistribute it and/or
> - modify it under the terms of the GNU Library General Public License as
> - published by the Free Software Foundation; either version 3 of the
> - License, or (at your option) any later version.
> -
> - The GNU C Library is distributed in the hope that it will be useful,
> - but WITHOUT ANY WARRANTY; without even the implied warranty of
> - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> - Library General Public License for more details.
> -
> - You should have received a copy of the GNU Library General Public
> - License along with the GNU C Library; see the file COPYING3. If
> - not see <http://www.gnu.org/licenses/>. */
> -
> -/* This contains contribution from Cygnus Support. */
> -
> -/* Global variable. Only the name is significant.
> - To find the address, look in the corresponding external symbol. */
> -__define_stab (N_GSYM, 0x20, "GSYM")
> -
> -/* Function name for BSD Fortran. Only the name is significant.
> - To find the address, look in the corresponding external symbol. */
> -__define_stab (N_FNAME, 0x22, "FNAME")
> -
> -/* Function name or text-segment variable for C. Value is its address.
> - Desc is supposedly starting line number, but GCC doesn't set it
> - and DBX seems not to miss it. */
> -__define_stab (N_FUN, 0x24, "FUN")
> -
> -/* Data-segment variable with internal linkage. Value is its address.
> - "Static Sym". */
> -__define_stab (N_STSYM, 0x26, "STSYM")
> -
> -/* BSS-segment variable with internal linkage. Value is its address. */
> -__define_stab (N_LCSYM, 0x28, "LCSYM")
> -
> -/* Begin function marker. */
> -__define_stab (N_BNSYM, 0x2e, "BNSYM")
> -
> -/* End function marker. */
> -__define_stab (N_ENSYM, 0x4e, "ENSYM")
> -
> -/* Name of main routine. Only the name is significant.
> - This is not used in C. */
> -__define_stab (N_MAIN, 0x2a, "MAIN")
> -
> -/* Global symbol in Pascal.
> - Supposedly the value is its line number; I'm skeptical. */
> -__define_stab (N_PC, 0x30, "PC")
> -
> -/* Number of symbols: 0, files,,funcs,lines according to Ultrix V4.0. */
> -__define_stab (N_NSYMS, 0x32, "NSYMS")
> -
> -/* "No DST map for sym: name, ,0,type,ignored" according to Ultrix V4.0. */
> -__define_stab (N_NOMAP, 0x34, "NOMAP")
> -
> -/* New stab from Solaris. I don't know what it means, but it
> - don't seem to contain useful information. */
> -__define_stab (N_OBJ, 0x38, "OBJ")
> -
> -/* New stab from Solaris. I don't know what it means, but it
> - don't seem to contain useful information. Possibly related to the
> - optimization flags used in this module. */
> -__define_stab (N_OPT, 0x3c, "OPT")
> -
> -/* Register variable. Value is number of register. */
> -__define_stab (N_RSYM, 0x40, "RSYM")
> -
> -/* Modula-2 compilation unit. Can someone say what info it contains? */
> -__define_stab (N_M2C, 0x42, "M2C")
> -
> -/* Line number in text segment. Desc is the line number;
> - value is corresponding address. */
> -__define_stab (N_SLINE, 0x44, "SLINE")
> -
> -/* Similar, for data segment. */
> -__define_stab (N_DSLINE, 0x46, "DSLINE")
> -
> -/* Similar, for bss segment. */
> -__define_stab (N_BSLINE, 0x48, "BSLINE")
> -
> -/* Sun's source-code browser stabs. ?? Don't know what the fields are.
> - Supposedly the field is "path to associated .cb file". THIS VALUE
> - OVERLAPS WITH N_BSLINE! */
> -__define_stab (N_BROWS, 0x48, "BROWS")
> -
> -/* GNU Modula-2 definition module dependency. Value is the modification time
> - of the definition file. Other is nonzero if it is imported with the
> - GNU M2 keyword %INITIALIZE. Perhaps N_M2C can be used if there
> - are enough empty fields? */
> -__define_stab(N_DEFD, 0x4a, "DEFD")
> -
> -/* THE FOLLOWING TWO STAB VALUES CONFLICT. Happily, one is for Modula-2
> - and one is for C++. Still,... */
> -/* GNU C++ exception variable. Name is variable name. */
> -__define_stab (N_EHDECL, 0x50, "EHDECL")
> -/* Modula2 info "for imc": name,,0,0,0 according to Ultrix V4.0. */
> -__define_stab (N_MOD2, 0x50, "MOD2")
> -
> -/* GNU C++ `catch' clause. Value is its address. Desc is nonzero if
> - this entry is immediately followed by a CAUGHT stab saying what exception
> - was caught. Multiple CAUGHT stabs means that multiple exceptions
> - can be caught here. If Desc is 0, it means all exceptions are caught
> - here. */
> -__define_stab (N_CATCH, 0x54, "CATCH")
> -
> -/* Structure or union element. Value is offset in the structure. */
> -__define_stab (N_SSYM, 0x60, "SSYM")
> -
> -/* Name of main source file.
> - Value is starting text address of the compilation. */
> -__define_stab (N_SO, 0x64, "SO")
> -
> -/* Automatic variable in the stack. Value is offset from frame pointer.
> - Also used for type descriptions. */
> -__define_stab (N_LSYM, 0x80, "LSYM")
> -
> -/* Beginning of an include file. Only Sun uses this.
> - In an object file, only the name is significant.
> - The Sun linker puts data into some of the other fields. */
> -__define_stab (N_BINCL, 0x82, "BINCL")
> -
> -/* Name of sub-source file (#include file).
> - Value is starting text address of the compilation. */
> -__define_stab (N_SOL, 0x84, "SOL")
> -
> -/* Parameter variable. Value is offset from argument pointer.
> - (On most machines the argument pointer is the same as the frame pointer. */
> -__define_stab (N_PSYM, 0xa0, "PSYM")
> -
> -/* End of an include file. No name.
> - This and N_BINCL act as brackets around the file's output.
> - In an object file, there is no significant data in this entry.
> - The Sun linker puts data into some of the fields. */
> -__define_stab (N_EINCL, 0xa2, "EINCL")
> -
> -/* Alternate entry point. Value is its address. */
> -__define_stab (N_ENTRY, 0xa4, "ENTRY")
> -
> -/* Beginning of lexical block.
> - The desc is the nesting level in lexical blocks.
> - The value is the address of the start of the text for the block.
> - The variables declared inside the block *precede* the N_LBRAC symbol. */
> -__define_stab (N_LBRAC, 0xc0, "LBRAC")
> -
> -/* Place holder for deleted include file. Replaces a N_BINCL and everything
> - up to the corresponding N_EINCL. The Sun linker generates these when
> - it finds multiple identical copies of the symbols from an include file.
> - This appears only in output from the Sun linker. */
> -__define_stab (N_EXCL, 0xc2, "EXCL")
> -
> -/* Modula-2 scope information. Can someone say what info it contains? */
> -__define_stab (N_SCOPE, 0xc4, "SCOPE")
> -
> -/* End of a lexical block. Desc matches the N_LBRAC's desc.
> - The value is the address of the end of the text for the block. */
> -__define_stab (N_RBRAC, 0xe0, "RBRAC")
> -
> -/* Begin named common block. Only the name is significant. */
> -__define_stab (N_BCOMM, 0xe2, "BCOMM")
> -
> -/* End named common block. Only the name is significant
> - (and it should match the N_BCOMM). */
> -__define_stab (N_ECOMM, 0xe4, "ECOMM")
> -
> -/* End common (local name): value is address.
> - I'm not sure how this is used. */
> -__define_stab (N_ECOML, 0xe8, "ECOML")
> -
> -/* These STAB's are used on Gould systems for Non-Base register symbols
> - or something like that. FIXME. I have assigned the values at random
> - since I don't have a Gould here. Fixups from Gould folk welcome... */
> -__define_stab (N_NBTEXT, 0xF0, "NBTEXT")
> -__define_stab (N_NBDATA, 0xF2, "NBDATA")
> -__define_stab (N_NBBSS, 0xF4, "NBBSS")
> -__define_stab (N_NBSTS, 0xF6, "NBSTS")
> -__define_stab (N_NBLCS, 0xF8, "NBLCS")
> -
> -/* Second symbol entry containing a length-value for the preceding entry.
> - The value is the length. */
> -__define_stab (N_LENG, 0xfe, "LENG")
> -
> -/* The above information, in matrix format.
> -
> - STAB MATRIX
> - _________________________________________________
> - | 00 - 1F are not dbx stab symbols |
> - | In most cases, the low bit is the EXTernal bit|
> -
> - | 00 UNDEF | 02 ABS | 04 TEXT | 06 DATA |
> - | 01 |EXT | 03 |EXT | 05 |EXT | 07 |EXT |
> -
> - | 08 BSS | 0A INDR | 0C FN_SEQ | 0E |
> - | 09 |EXT | 0B | 0D | 0F |
> -
> - | 10 | 12 COMM | 14 SETA | 16 SETT |
> - | 11 | 13 | 15 | 17 |
> -
> - | 18 SETD | 1A SETB | 1C SETV | 1E WARNING|
> - | 19 | 1B | 1D | 1F FN |
> -
> - |_______________________________________________|
> - | Debug entries with bit 01 set are unused. |
> - | 20 GSYM | 22 FNAME | 24 FUN | 26 STSYM |
> - | 28 LCSYM | 2A MAIN | 2C | 2E BNSYM |
> - | 30 PC | 32 NSYMS | 34 NOMAP | 36 |
> - | 38 OBJ | 3A | 3C OPT | 3E |
> - | 40 RSYM | 42 M2C | 44 SLINE | 46 DSLINE |
> - | 48 BSLINE*| 4A DEFD | 4C | 4E ENSYM |
> - | 50 EHDECL*| 52 | 54 CATCH | 56 |
> - | 58 | 5A | 5C | 5E |
> - | 60 SSYM | 62 | 64 SO | 66 |
> - | 68 | 6A | 6C | 6E |
> - | 70 | 72 | 74 | 76 |
> - | 78 | 7A | 7C | 7E |
> - | 80 LSYM | 82 BINCL | 84 SOL | 86 |
> - | 88 | 8A | 8C | 8E |
> - | 90 | 92 | 94 | 96 |
> - | 98 | 9A | 9C | 9E |
> - | A0 PSYM | A2 EINCL | A4 ENTRY | A6 |
> - | A8 | AA | AC | AE |
> - | B0 | B2 | B4 | B6 |
> - | B8 | BA | BC | BE |
> - | C0 LBRAC | C2 EXCL | C4 SCOPE | C6 |
> - | C8 | CA | CC | CE |
> - | D0 | D2 | D4 | D6 |
> - | D8 | DA | DC | DE |
> - | E0 RBRAC | E2 BCOMM | E4 ECOMM | E6 |
> - | E8 ECOML | EA | EC | EE |
> - | F0 | F2 | F4 | F6 |
> - | F8 | FA | FC | FE LENG |
> - +-----------------------------------------------+
> - * 50 EHDECL is also MOD2.
> - * 48 BSLINE is also BROWS.
> - */
> diff --git a/gcc/system.h b/gcc/system.h
> index f8d42ff6815..c192b6c3ce7 100644
> --- a/gcc/system.h
> +++ b/gcc/system.h
> @@ -1009,8 +1009,7 @@ extern void fancy_abort (const char *, int, const char *)
> ASM_OUTPUT_DEFINE_LABEL_DIFFERENCE_SYMBOL HOST_WORDS_BIG_ENDIAN \
> OBJC_PROLOGUE ALLOCATE_TRAMPOLINE HANDLE_PRAGMA ROUND_TYPE_SIZE \
> ROUND_TYPE_SIZE_UNIT CONST_SECTION_ASM_OP CRT_GET_RFIB_TEXT \
> - DBX_LBRAC_FIRST DBX_OUTPUT_ENUM DBX_OUTPUT_SOURCE_FILENAME \
> - DBX_WORKING_DIRECTORY INSN_CACHE_DEPTH INSN_CACHE_SIZE \
> + INSN_CACHE_DEPTH INSN_CACHE_SIZE \
> INSN_CACHE_LINE_WIDTH INIT_SECTION_PREAMBLE NEED_ATEXIT ON_EXIT \
> EXIT_BODY OBJECT_FORMAT_ROSE MULTIBYTE_CHARS MAP_CHARACTER \
> LIBGCC_NEEDS_DOUBLE FINAL_PRESCAN_LABEL DEFAULT_CALLER_SAVES \
> @@ -1023,15 +1022,14 @@ extern void fancy_abort (const char *, int, const char *)
> MAX_WCHAR_TYPE_SIZE SHARED_SECTION_ASM_OP INTEGRATE_THRESHOLD \
> FINAL_REG_PARM_STACK_SPACE MAYBE_REG_PARM_STACK_SPACE \
> TRADITIONAL_PIPELINE_INTERFACE DFA_PIPELINE_INTERFACE \
> - DBX_OUTPUT_STANDARD_TYPES BUILTIN_SETJMP_FRAME_VALUE \
> + BUILTIN_SETJMP_FRAME_VALUE \
> SUNOS4_SHARED_LIBRARIES PROMOTE_FOR_CALL_ONLY \
> SPACE_AFTER_L_OPTION NO_RECURSIVE_FUNCTION_CSE \
> DEFAULT_MAIN_RETURN TARGET_MEM_FUNCTIONS EXPAND_BUILTIN_VA_ARG \
> COLLECT_PARSE_FLAG DWARF2_GENERATE_TEXT_SECTION_LABEL WINNING_GDB \
> ASM_OUTPUT_FILENAME ASM_OUTPUT_SOURCE_LINE FILE_NAME_JOINER \
> - GDB_INV_REF_REGPARM_STABS_LETTER DBX_MEMPARM_STABS_LETTER \
> - PUT_SDB_SRC_FILE STABS_GCC_MARKER DBX_OUTPUT_FUNCTION_END \
> - DBX_OUTPUT_GCC_MARKER DBX_FINISH_SYMBOL SDB_GENERATE_FAKE \
> + GDB_INV_REF_REGPARM_STABS_LETTER \
> + PUT_SDB_SRC_FILE STABS_GCC_MARKER SDB_GENERATE_FAKE \
> NON_SAVING_SETJMP TARGET_LATE_RTL_PROLOGUE_EPILOGUE \
> CASE_DROPS_THROUGH TARGET_BELL TARGET_BS TARGET_CR TARGET_DIGIT0 \
> TARGET_ESC TARGET_FF TARGET_NEWLINE TARGET_TAB TARGET_VT \
> @@ -1056,8 +1054,8 @@ extern void fancy_abort (const char *, int, const char *)
> PREFERRED_OUTPUT_RELOAD_CLASS SYSTEM_INCLUDE_DIR \
> STANDARD_INCLUDE_DIR STANDARD_INCLUDE_COMPONENT \
> LINK_ELIMINATE_DUPLICATE_LDIRECTORIES MIPS_DEBUGGING_INFO \
> - IDENT_ASM_OP ALL_COP_ADDITIONAL_REGISTER_NAMES DBX_OUTPUT_LBRAC \
> - DBX_OUTPUT_NFUN DBX_OUTPUT_RBRAC RANGE_TEST_NON_SHORT_CIRCUIT \
> + IDENT_ASM_OP ALL_COP_ADDITIONAL_REGISTER_NAMES \
> + RANGE_TEST_NON_SHORT_CIRCUIT \
> REAL_VALUE_TRUNCATE REVERSE_CONDEXEC_PREDICATES_P \
> TARGET_ALIGN_ANON_BITFIELDS TARGET_NARROW_VOLATILE_BITFIELDS \
> IDENT_ASM_OP UNALIGNED_SHORT_ASM_OP UNALIGNED_INT_ASM_OP \
> diff --git a/gcc/target-def.h b/gcc/target-def.h
> index 1c4aa2963dc..f81f8fe3bb3 100644
> --- a/gcc/target-def.h
> +++ b/gcc/target-def.h
> @@ -62,8 +62,6 @@
> # else
> # ifdef TARGET_ASM_NAMED_SECTION
> # define TARGET_ASM_CONSTRUCTOR default_named_section_asm_out_constructor
> -# else
> -# define TARGET_ASM_CONSTRUCTOR default_stabs_asm_out_constructor
> # endif
> # endif
> #endif
> @@ -74,8 +72,6 @@
> # else
> # ifdef TARGET_ASM_NAMED_SECTION
> # define TARGET_ASM_DESTRUCTOR default_named_section_asm_out_destructor
> -# else
> -# define TARGET_ASM_DESTRUCTOR default_stabs_asm_out_destructor
> # endif
> # endif
> #endif
> diff --git a/gcc/testsuite/g++.dg/cpp0x/alias-decl-debug-0.C b/gcc/testsuite/g++.dg/cpp0x/alias-decl-debug-0.C
> deleted file mode 100644
> index 8464aa35a1a..00000000000
> --- a/gcc/testsuite/g++.dg/cpp0x/alias-decl-debug-0.C
> +++ /dev/null
> @@ -1,12 +0,0 @@
> -// Origin: PR c++/51032
> -// { dg-do compile { target { c++11 && stabs } } }
> -// { dg-options "-gstabs+" }
> -
> -template <class C>
> -struct A {
> - template<class U> using B = U*;
> - int a;
> -};
> -
> -A<int> a;
> -
> diff --git a/gcc/testsuite/g++.dg/other/PR23205.C b/gcc/testsuite/g++.dg/other/PR23205.C
> deleted file mode 100644
> index 65ba1f6f306..00000000000
> --- a/gcc/testsuite/g++.dg/other/PR23205.C
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -/* { dg-do compile { target stabs } } */
> -/* { dg-options "-gstabs+ -fno-eliminate-unused-debug-types" } */
> -
> -const int foobar = 4;
> -int foo ()
> -{
> - return foobar + 1;
> -}
> -
> -int main()
> -{
> - int i;
> - i = foo();
> - return i;
> -}
> -
> -/* { dg-final { scan-assembler ".stabs.*foobar:(c=i|S)" } } */
> diff --git a/gcc/testsuite/g++.dg/other/pr23205-2.C b/gcc/testsuite/g++.dg/other/pr23205-2.C
> deleted file mode 100644
> index 7b25c071a67..00000000000
> --- a/gcc/testsuite/g++.dg/other/pr23205-2.C
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -/* { dg-do compile { target stabs } } */
> -/* { dg-options "-gstabs+ -fno-eliminate-unused-debug-types -ftoplevel-reorder" } */
> -
> -const int foobar = 4;
> -int foo ()
> -{
> - return foobar + 1;
> -}
> -
> -int main()
> -{
> - int i;
> - i = foo();
> - return i;
> -}
> -
> -/* { dg-final { scan-assembler ".stabs.*foobar:c=i" } } */
> diff --git a/gcc/testsuite/gcc.dg/20040813-1.c b/gcc/testsuite/gcc.dg/20040813-1.c
> deleted file mode 100644
> index 9cf664dd769..00000000000
> --- a/gcc/testsuite/gcc.dg/20040813-1.c
> +++ /dev/null
> @@ -1,14 +0,0 @@
> -/* Test lang in N_SO stab. */
> -/* Contributed by Devang Patel <dpatel@apple.com> */
> -
> -/* { dg-do compile { target stabs } } */
> -/* { dg-options "-gstabs" } */
> -
> -int
> -main ()
> -{
> - return 0;
> -}
> -
> -/* { dg-final { scan-assembler ".stabs.*100,0,2" } } */
> -
> diff --git a/gcc/testsuite/gcc.dg/darwin-20040809-2.c b/gcc/testsuite/gcc.dg/darwin-20040809-2.c
> deleted file mode 100644
> index 98d571276d0..00000000000
> --- a/gcc/testsuite/gcc.dg/darwin-20040809-2.c
> +++ /dev/null
> @@ -1,15 +0,0 @@
> -/* Test dead code strip support. */
> -/* Contributed by Devang Patel <dpatel@apple.com> */
> -
> -/* { dg-do compile { target { *-*-darwin* && stabs } } } */
> -/* { dg-options "-gstabs+ -fno-eliminate-unused-debug-symbols" } */
> -
> -int
> -main ()
> -{
> - return 0;
> -}
> -
> -/* { dg-final { scan-assembler ".stabd.46,0,0" } } */
> -/* { dg-final { scan-assembler ".stabd.78,0,0" } } */
> -
> diff --git a/gcc/testsuite/gcc.dg/debug/pr35154.c b/gcc/testsuite/gcc.dg/debug/pr35154.c
> deleted file mode 100644
> index 08eefaf66f9..00000000000
> --- a/gcc/testsuite/gcc.dg/debug/pr35154.c
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -/* Test to make sure that stabs for C symbols that go into .comm have the
> - proper structure. These should be lettered G for the struct that gives
> - the name to the .comm, and should be V or S for .lcomm symbols. */
> -
> -__attribute__ ((used))
> -static char i_outer;
> -struct {
> - char f1;
> - char f2;
> -} opta;
> -struct {
> - char f1;
> - char f2;
> -} optb;
> -
> -int
> -main()
> -{
> - static char i_inner[2] __attribute__ ((used));
> - i_inner[0] = 'a'; i_inner[1] = 'b';
> - opta.f1 = 'c';
> - opta.f2 = 'd';
> - optb.f1 = 'C';
> - optb.f2 = 'D';
> - i_outer = 'e';
> -/* { dg-do compile } */
> -/* { dg-skip-if "No stabs" { mmix-*-* alpha*-*-* hppa*64*-*-* ia64-*-* *-*-vxworks* } } */
> -/* { dg-skip-if "stabs only" { *-*-* } { "*" } { "-gstabs" } } */
> - return 0;
> -}
> -
> -/* { dg-final { scan-assembler ".stabs.*i_inner:V" } } */
> -/* { dg-final { scan-assembler ".stabs.*i_outer:S" } } */
> -/* { dg-final { scan-assembler ".stabs.*opta:G" } } */
> -/* { dg-final { scan-assembler ".stabs.*optb:G" } } */
> diff --git a/gcc/testsuite/gcc.dg/pr69471-2.c b/gcc/testsuite/gcc.dg/pr69471-2.c
> deleted file mode 100644
> index d5799604b36..00000000000
> --- a/gcc/testsuite/gcc.dg/pr69471-2.c
> +++ /dev/null
> @@ -1,8 +0,0 @@
> -/* { dg-do compile } */
> -/* { dg-options "-gstabs2 -gdwarf-4 -gstabs3" } */
> -/* { dg-error "conflicts with prior selectio" "" { target *-*-* } 0 } */
> -
> -void
> -foo (void)
> -{
> -}
> diff --git a/gcc/testsuite/gcc.target/powerpc/stabs-attrib-vect-darwin.c b/gcc/testsuite/gcc.target/powerpc/stabs-attrib-vect-darwin.c
> deleted file mode 100644
> index 5c7acf18a58..00000000000
> --- a/gcc/testsuite/gcc.target/powerpc/stabs-attrib-vect-darwin.c
> +++ /dev/null
> @@ -1,12 +0,0 @@
> -/* Test Attribute Vector associated with vector type stabs. */
> -/* { dg-do compile { target powerpc*-*-darwin* } } */
> -/* { dg-require-effective-target stabs } */
> -/* { dg-options "-gstabs+ -fno-eliminate-unused-debug-types -faltivec" } */
> -
> -int main ()
> -{
> - vector int vi = { 6,7,8,9 };
> - return 0;
> -}
> -
> -/* { dg-final { scan-assembler ".stabs.*vi\:\\(0,\[0-9\]+\\)=\@V" } } */
> diff --git a/gcc/testsuite/gcc.target/s390/20041216-1.c b/gcc/testsuite/gcc.target/s390/20041216-1.c
> deleted file mode 100644
> index 492ee6c182b..00000000000
> --- a/gcc/testsuite/gcc.target/s390/20041216-1.c
> +++ /dev/null
> @@ -1,23 +0,0 @@
> -/* This test case would get an unresolved symbol during link
> - because stabs referred to an optimized-away literal pool
> - entry. */
> -
> -/* { dg-do run } */
> -/* { dg-options "-O2 -fno-omit-frame-pointer -gstabs" } */
> -
> -int main (void)
> -{
> - static char buf[4096];
> - char *p;
> -
> - do
> - {
> - p = buf;
> - asm volatile ("" : : : "memory", "0", "1", "2", "3", "4", "5", "6",
> - "7", "8", "9", "10", "12");
> - }
> - while (*p);
> -
> - return 0;
> -}
> -
> diff --git a/gcc/testsuite/gfortran.dg/debug/pr35154-stabs.f b/gcc/testsuite/gfortran.dg/debug/pr35154-stabs.f
> deleted file mode 100644
> index 5e5c42e9b8f..00000000000
> --- a/gcc/testsuite/gfortran.dg/debug/pr35154-stabs.f
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -C Test program for common block debugging. G. Helffrich 11 July 2004.
> -C { dg-do compile }
> -C { dg-skip-if "No stabs" { aarch64*-*-* mmix-*-* alpha*-*-* hppa*64*-*-* ia64-*-* *-*-vxworks* } }
> -C { dg-skip-if "No stabs" { *-*-* } { "*" } { "-gstabs" } }
> - common i,j
> - common /label/l,m
> - i = 1
> - j = 2
> - k = 3
> - l = 4
> - m = 5
> - call sub
> - end
> - subroutine sub
> - common /label/l,m
> - logical first
> - save n
> - data first /.true./
> - if (first) then
> - n = 0
> - first = .false.
> - endif
> - n = n + 1
> - l = l + 1
> - return
> - end
> -
> -C { dg-final { scan-assembler ".stabs.*\"__BLNK__\",226" } }
> -C { dg-final { scan-assembler ".stabs.*\"i:V.*\",.*,0" } }
> -C { dg-final { scan-assembler ".stabs.*\"j:V.*\",.*,4" } }
> -C { dg-final { scan-assembler ".stabs.*\"__BLNK__\",228" } }
> -C { dg-final { scan-assembler ".stabs.*\"label_\",226" } }
> -C { dg-final { scan-assembler ".stabs.*\"l:V.*\",.*,0" } }
> -C { dg-final { scan-assembler ".stabs.*\"m:V.*\",.*,4" } }
> -C { dg-final { scan-assembler ".stabs.*\"label_\",228" } }
> diff --git a/gcc/testsuite/lib/gcc-dg.exp b/gcc/testsuite/lib/gcc-dg.exp
> index f58b9e6e873..23ec038f41e 100644
> --- a/gcc/testsuite/lib/gcc-dg.exp
> +++ b/gcc/testsuite/lib/gcc-dg.exp
> @@ -656,7 +656,7 @@ proc gcc-dg-target-supports-debug-format { target_compile trivial type } {
> proc gcc-dg-debug-runtest { target_compile trivial opt_opts testcases } {
> if ![info exists DEBUG_TORTURE_OPTIONS] {
> set DEBUG_TORTURE_OPTIONS ""
> - foreach type {-gctf -gdwarf-2 -gstabs -gstabs+ -gxcoff -gxcoff+} {
> + foreach type {-gctf -gdwarf-2} {
> if [expr [gcc-dg-target-supports-debug-format \
> $target_compile $trivial $type]] {
> if { $type == "-gctf" } {
> diff --git a/gcc/testsuite/lib/gfortran-dg.exp b/gcc/testsuite/lib/gfortran-dg.exp
> index 7407be4b8b6..d4a245e0bfe 100644
> --- a/gcc/testsuite/lib/gfortran-dg.exp
> +++ b/gcc/testsuite/lib/gfortran-dg.exp
> @@ -170,7 +170,7 @@ proc gfortran-dg-debug-runtest { target_compile trivial opt_opts testcases } {
>
> if ![info exists DEBUG_TORTURE_OPTIONS] {
> set DEBUG_TORTURE_OPTIONS ""
> - set type_list [list "-gstabs" "-gstabs+" "-gxcoff" "-gxcoff+" "-gdwarf-2" ]
> + set type_list [list "-gdwarf-2" ]
> foreach type $type_list {
> set comp_output [$target_compile \
> "$srcdir/$subdir/$trivial" "trivial.S" assembly \
> diff --git a/gcc/testsuite/lib/target-supports.exp b/gcc/testsuite/lib/target-supports.exp
> index 236128bf5de..1de2e8c4c3f 100644
> --- a/gcc/testsuite/lib/target-supports.exp
> +++ b/gcc/testsuite/lib/target-supports.exp
> @@ -1117,15 +1117,6 @@ proc check_effective_target_pthread {} {
> } "-pthread"]
> }
>
> -# Return 1 if compilation with -gstabs is error-free for trivial
> -# code, 0 otherwise.
> -
> -proc check_effective_target_stabs {} {
> - return [check_no_compiler_messages stabs object {
> - void foo (void) { }
> - } "-gstabs"]
> -}
> -
> # Return 1 if compilation with -mpe-aligned-commons is error-free
> # for trivial code, 0 otherwise.
>
> diff --git a/gcc/testsuite/objc.dg/stabs-1.m b/gcc/testsuite/objc.dg/stabs-1.m
> deleted file mode 100644
> index b97e4d6a762..00000000000
> --- a/gcc/testsuite/objc.dg/stabs-1.m
> +++ /dev/null
> @@ -1,19 +0,0 @@
> -/* Check if the final SO STABS record goes into the .text section. */
> -/* Contributed by Ziemowit Laski <zlaski@apple.com> */
> -
> -/* { dg-do compile { target stabs } } */
> -/* { dg-options "-gstabs" } */
> -/* { dg-additional-options "-Wno-objc-root-class" } */
> -
> -@interface MyClass
> -+ newWithArg: arg;
> -@end
> -
> -@implementation MyClass
> -+ newWithArg: arg
> -{
> -}
> -@end
> -
> -/* See PR target/52152 for the xfail. */
> -/* { dg-final { scan-assembler "(.SUBSPA.*\[\$\]CODE\[\$\]|.text\"?)\n\t.stabs.*100,0,0,(\[\.\$\])?L?L\[\$\]?etext\[0-9\]*\n(\[\.\$\])?L?L\[\$\]?etext" { xfail mips*-*-elf* } } } */
> diff --git a/gcc/toplev.cc b/gcc/toplev.cc
> index 61d234a9ef4..924871fa9a8 100644
> --- a/gcc/toplev.cc
> +++ b/gcc/toplev.cc
> @@ -89,14 +89,6 @@ along with GCC; see the file COPYING3. If not see
> #include "ipa-param-manipulation.h"
> #include "dbgcnt.h"
>
> -#if defined(DBX_DEBUGGING_INFO) || defined(XCOFF_DEBUGGING_INFO)
> -#include "dbxout.h"
> -#endif
> -
> -#ifdef XCOFF_DEBUGGING_INFO
> -#include "xcoffout.h" /* Needed for external data declarations. */
> -#endif
> -
> #include "selftest.h"
>
> #ifdef HAVE_isl
> @@ -1417,21 +1409,8 @@ process_options (bool no_backend)
> && ctf_debug_info_level == CTFINFO_LEVEL_NONE)
> write_symbols = NO_DEBUG;
>
> - /* Warn if STABS debug gets enabled and is not the default. */
> - if (PREFERRED_DEBUGGING_TYPE != DBX_DEBUG && (write_symbols & DBX_DEBUG))
> - warning (0, "STABS debugging information is obsolete and not "
> - "supported anymore");
> -
> if (write_symbols == NO_DEBUG)
> ;
> -#if defined(DBX_DEBUGGING_INFO)
> - else if (write_symbols == DBX_DEBUG)
> - debug_hooks = &dbx_debug_hooks;
> -#endif
> -#if defined(XCOFF_DEBUGGING_INFO)
> - else if (write_symbols == XCOFF_DEBUG)
> - debug_hooks = &xcoff_debug_hooks;
> -#endif
> #ifdef DWARF2_DEBUGGING_INFO
> else if (dwarf_debuginfo_p ())
> debug_hooks = &dwarf2_debug_hooks;
> diff --git a/gcc/varasm.cc b/gcc/varasm.cc
> index 4db8506b106..b0c4d6ae8ed 100644
> --- a/gcc/varasm.cc
> +++ b/gcc/varasm.cc
> @@ -62,10 +62,6 @@ along with GCC; see the file COPYING3. If not see
> #include "toplev.h"
> #include "opts.h"
>
> -#ifdef XCOFF_DEBUGGING_INFO
> -#include "xcoffout.h" /* Needed for external data declarations. */
> -#endif
> -
> /* The (assembler) name of the first globally-visible object output. */
> extern GTY(()) const char *first_global_object_name;
> extern GTY(()) const char *weak_global_object_name;
> diff --git a/gcc/xcoffout.cc b/gcc/xcoffout.cc
> deleted file mode 100644
> index bafd3552417..00000000000
> --- a/gcc/xcoffout.cc
> +++ /dev/null
> @@ -1,494 +0,0 @@
> -/* Output xcoff-format symbol table information from GNU compiler.
> - Copyright (C) 1992-2022 Free Software Foundation, Inc.
> -
> -This file is part of GCC.
> -
> -GCC is free software; you can redistribute it and/or modify it under
> -the terms of the GNU General Public License as published by the Free
> -Software Foundation; either version 3, or (at your option) any later
> -version.
> -
> -GCC is distributed in the hope that it will be useful, but WITHOUT ANY
> -WARRANTY; without even the implied warranty of MERCHANTABILITY or
> -FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> -for more details.
> -
> -You should have received a copy of the GNU General Public License
> -along with GCC; see the file COPYING3. If not see
> -<http://www.gnu.org/licenses/>. */
> -
> -/* Output xcoff-format symbol table data. The main functionality is contained
> - in dbxout.cc. This file implements the sdbout-like parts of the xcoff
> - interface. Many functions are very similar to their counterparts in
> - the former sdbout.c file. */
> -
> -#include "config.h"
> -#include "system.h"
> -#include "coretypes.h"
> -#include "target.h"
> -#include "rtl.h"
> -#include "tree.h"
> -#include "diagnostic-core.h"
> -#include "varasm.h"
> -#include "output.h"
> -#include "debug.h"
> -#include "file-prefix-map.h" /* remap_debug_filename() */
> -
> -#ifdef XCOFF_DEBUGGING_INFO
> -
> -/* This defines the C_* storage classes. */
> -#include "xcoff.h"
> -#include "xcoffout.h"
> -#include "dbxout.h"
> -#include "gstab.h"
> -
> -/* Line number of beginning of current function, minus one.
> - Negative means not in a function or not using xcoff. */
> -
> -static int xcoff_begin_function_line = -1;
> -static int xcoff_inlining = 0;
> -
> -/* Name of the current include file. */
> -
> -const char *xcoff_current_include_file;
> -
> -/* Name of the current function file. This is the file the `.bf' is
> - emitted from. In case a line is emitted from a different file,
> - (by including that file of course), then the line number will be
> - absolute. */
> -
> -static const char *xcoff_current_function_file;
> -
> -/* Names of bss and data sections. These should be unique names for each
> - compilation unit. */
> -
> -char *xcoff_bss_section_name;
> -char *xcoff_private_data_section_name;
> -char *xcoff_private_rodata_section_name;
> -char *xcoff_tls_data_section_name;
> -char *xcoff_read_only_section_name;
> -
> -/* Last source file name mentioned in a NOTE insn. */
> -
> -const char *xcoff_lastfile;
> -
> -/* Macro definitions used below. */
> -
> -#define ABS_OR_RELATIVE_LINENO(LINENO) \
> -((xcoff_inlining) ? (LINENO) : (LINENO) - xcoff_begin_function_line)
> -
> -/* Output source line numbers via ".line". */
> -#define ASM_OUTPUT_LINE(FILE,LINENUM) \
> - do \
> - { \
> - /* Make sure we're in a function and prevent output of .line 0, as \
> - line # 0 is meant for symbol addresses in xcoff. Additionally, \
> - line numbers are 'unsigned short' in 32-bit mode. */ \
> - if (xcoff_begin_function_line >= 0) \
> - { \
> - int lno = ABS_OR_RELATIVE_LINENO (LINENUM); \
> - if (lno > 0 && (TARGET_64BIT || lno <= (int)USHRT_MAX)) \
> - fprintf (FILE, "\t.line\t%d\n", lno); \
> - } \
> - } \
> - while (0)
> -
> -#define ASM_OUTPUT_LFB(FILE,LINENUM) \
> -{ \
> - if (xcoff_begin_function_line == -1) \
> - { \
> - xcoff_begin_function_line = (LINENUM) - 1;\
> - fprintf (FILE, "\t.bf\t%d\n", (LINENUM)); \
> - } \
> - xcoff_current_function_file \
> - = (xcoff_current_include_file \
> - ? xcoff_current_include_file : main_input_filename); \
> -}
> -
> -#define ASM_OUTPUT_LFE(FILE,LINENUM) \
> - do \
> - { \
> - fprintf (FILE, "\t.ef\t%d\n", (LINENUM)); \
> - xcoff_begin_function_line = -1; \
> - } \
> - while (0)
> -
> -#define ASM_OUTPUT_LBB(FILE,LINENUM,BLOCKNUM) \
> - fprintf (FILE, "\t.bb\t%d\n", ABS_OR_RELATIVE_LINENO (LINENUM))
> -
> -#define ASM_OUTPUT_LBE(FILE,LINENUM,BLOCKNUM) \
> - fprintf (FILE, "\t.eb\t%d\n", ABS_OR_RELATIVE_LINENO (LINENUM))
> -
> -static void xcoffout_block (tree, int, tree);
> -static void xcoffout_source_file (FILE *, const char *, int);
> -
> -/* Support routines for XCOFF debugging info. */
> -
> -struct xcoff_type_number
> -{
> - const char *name;
> - int number;
> -};
> -static const struct xcoff_type_number xcoff_type_numbers[] = {
> - { "int", -1 },
> - { "char", -2 },
> - { "short int", -3 },
> - { "long int", -4 }, /* fiddled to -31 if 64 bits */
> - { "unsigned char", -5 },
> - { "signed char", -6 },
> - { "short unsigned int", -7 },
> - { "unsigned int", -8 },
> - /* No such type "unsigned". */
> - { "long unsigned int", -10 }, /* fiddled to -32 if 64 bits */
> - { "void", -11 },
> - { "float", -12 },
> - { "double", -13 },
> - { "long double", -14 },
> - /* Fortran types run from -15 to -29. */
> - { "wchar", -30 }, /* XXX Should be "wchar_t" ? */
> - { "long long int", -31 },
> - { "long long unsigned int", -32 },
> - /* Additional Fortran types run from -33 to -37. */
> -
> - /* ??? Should also handle built-in C++ and Obj-C types. There perhaps
> - aren't any that C doesn't already have. */
> -};
> -
> -/* Returns an XCOFF fundamental type number for DECL (assumed to be a
> - TYPE_DECL), or 0 if dbxout.cc should assign a type number normally. */
> -int
> -xcoff_assign_fundamental_type_number (tree decl)
> -{
> - const char *name;
> - size_t i;
> -
> - /* Do not waste time searching the list for non-intrinsic types. */
> - if (DECL_NAME (decl) == 0 || ! DECL_IS_UNDECLARED_BUILTIN (decl))
> - return 0;
> -
> - name = IDENTIFIER_POINTER (DECL_NAME (decl));
> -
> - /* Linear search, blech, but the list is too small to bother
> - doing anything else. */
> - for (i = 0; i < ARRAY_SIZE (xcoff_type_numbers); i++)
> - if (!strcmp (xcoff_type_numbers[i].name, name))
> - goto found;
> - return 0;
> -
> - found:
> - /* -4 and -10 should be replaced with -31 and -32, respectively,
> - when used for a 64-bit type. */
> - if (int_size_in_bytes (TREE_TYPE (decl)) == 8)
> - {
> - if (xcoff_type_numbers[i].number == -4)
> - return -31;
> - if (xcoff_type_numbers[i].number == -10)
> - return -32;
> - }
> - return xcoff_type_numbers[i].number;
> -}
> -
> -/* Print an error message for unrecognized stab codes. */
> -
> -#define UNKNOWN_STAB(STR) \
> - internal_error ("no sclass for %s stab (0x%x)", STR, stab)
> -
> -/* Conversion routine from BSD stabs to AIX storage classes. */
> -
> -int
> -stab_to_sclass (int stab)
> -{
> - switch (stab)
> - {
> - case N_GSYM:
> - return C_GSYM;
> -
> - case N_FNAME:
> - UNKNOWN_STAB ("N_FNAME");
> -
> - case N_FUN:
> - return C_FUN;
> -
> - case N_STSYM:
> - case N_LCSYM:
> - return C_STSYM;
> -
> - case N_MAIN:
> - UNKNOWN_STAB ("N_MAIN");
> -
> - case N_RSYM:
> - return C_RSYM;
> -
> - case N_SSYM:
> - UNKNOWN_STAB ("N_SSYM");
> -
> - case N_RPSYM:
> - return C_RPSYM;
> -
> - case N_PSYM:
> - return C_PSYM;
> - case N_LSYM:
> - return C_LSYM;
> - case N_DECL:
> - return C_DECL;
> - case N_ENTRY:
> - return C_ENTRY;
> -
> - case N_SO:
> - UNKNOWN_STAB ("N_SO");
> -
> - case N_SOL:
> - UNKNOWN_STAB ("N_SOL");
> -
> - case N_SLINE:
> - UNKNOWN_STAB ("N_SLINE");
> -
> - case N_DSLINE:
> - UNKNOWN_STAB ("N_DSLINE");
> -
> - case N_BSLINE:
> - UNKNOWN_STAB ("N_BSLINE");
> -
> - case N_BINCL:
> - UNKNOWN_STAB ("N_BINCL");
> -
> - case N_EINCL:
> - UNKNOWN_STAB ("N_EINCL");
> -
> - case N_EXCL:
> - UNKNOWN_STAB ("N_EXCL");
> -
> - case N_LBRAC:
> - UNKNOWN_STAB ("N_LBRAC");
> -
> - case N_RBRAC:
> - UNKNOWN_STAB ("N_RBRAC");
> -
> - case N_BCOMM:
> - return C_BCOMM;
> - case N_ECOMM:
> - return C_ECOMM;
> - case N_ECOML:
> - return C_ECOML;
> -
> - case N_LENG:
> - UNKNOWN_STAB ("N_LENG");
> -
> - case N_PC:
> - UNKNOWN_STAB ("N_PC");
> -
> - case N_M2C:
> - UNKNOWN_STAB ("N_M2C");
> -
> - case N_SCOPE:
> - UNKNOWN_STAB ("N_SCOPE");
> -
> - case N_CATCH:
> - UNKNOWN_STAB ("N_CATCH");
> -
> - case N_OPT:
> - UNKNOWN_STAB ("N_OPT");
> -
> - default:
> - UNKNOWN_STAB ("?");
> - }
> -}
> -
> -/* Output debugging info to FILE to switch to sourcefile FILENAME.
> - INLINE_P is true if this is from an inlined function. */
> -
> -static void
> -xcoffout_source_file (FILE *file, const char *filename, int inline_p)
> -{
> - if (filename
> - && (xcoff_lastfile == 0 || strcmp (filename, xcoff_lastfile)
> - || (inline_p && ! xcoff_inlining)
> - || (! inline_p && xcoff_inlining)))
> - {
> - if (xcoff_current_include_file)
> - {
> - fprintf (file, "\t.ei\t");
> - output_quoted_string (file,
> - remap_debug_filename (xcoff_current_include_file));
> - fprintf (file, "\n");
> - xcoff_current_include_file = NULL;
> - }
> - xcoff_inlining = inline_p;
> - if (strcmp (main_input_filename, filename) || inline_p)
> - {
> - fprintf (file, "\t.bi\t");
> - output_quoted_string (file, remap_debug_filename (filename));
> - fprintf (file, "\n");
> - xcoff_current_include_file = filename;
> - }
> - xcoff_lastfile = filename;
> - }
> -}
> -
> -/* Output a line number symbol entry for location (FILENAME, LINE). */
> -
> -void
> -xcoffout_source_line (unsigned int line, unsigned int column ATTRIBUTE_UNUSED,
> - const char *filename, int discriminator ATTRIBUTE_UNUSED,
> - bool is_stmt ATTRIBUTE_UNUSED)
> -{
> - bool inline_p = (strcmp (xcoff_current_function_file, filename) != 0
> - || (int) line < xcoff_begin_function_line);
> -
> - xcoffout_source_file (asm_out_file, filename, inline_p);
> -
> - ASM_OUTPUT_LINE (asm_out_file, line);
> -}
> -
> -/* Output the symbols defined in block number DO_BLOCK.
> -
> - This function works by walking the tree structure of blocks,
> - counting blocks until it finds the desired block. */
> -
> -static unsigned int do_block = 0;
> -
> -static void
> -xcoffout_block (tree block, int depth, tree args)
> -{
> - while (block)
> - {
> - /* Ignore blocks never expanded or otherwise marked as real. */
> - if (TREE_USED (block))
> - {
> - /* When we reach the specified block, output its symbols. */
> - if (BLOCK_NUMBER (block) == do_block)
> - {
> - /* Output the syms of the block. */
> - if (debug_info_level != DINFO_LEVEL_TERSE || depth == 0)
> - dbxout_syms (BLOCK_VARS (block));
> - if (args)
> - dbxout_reg_parms (args);
> -
> - /* We are now done with the block. Don't go to inner blocks. */
> - return;
> - }
> - /* If we are past the specified block, stop the scan. */
> - else if (BLOCK_NUMBER (block) >= do_block)
> - return;
> -
> - /* Output the subblocks. */
> - xcoffout_block (BLOCK_SUBBLOCKS (block), depth + 1, NULL_TREE);
> - }
> - block = BLOCK_CHAIN (block);
> - }
> -}
> -
> -/* Describe the beginning of an internal block within a function.
> - Also output descriptions of variables defined in this block.
> -
> - N is the number of the block, by order of beginning, counting from 1,
> - and not counting the outermost (function top-level) block.
> - The blocks match the BLOCKs in DECL_INITIAL (current_function_decl),
> - if the count starts at 0 for the outermost one. */
> -
> -void
> -xcoffout_begin_block (unsigned int line, unsigned int n)
> -{
> - tree decl = current_function_decl;
> -
> - /* The IBM AIX compiler does not emit a .bb for the function level scope,
> - so we avoid it here also. */
> - if (n != 1)
> - ASM_OUTPUT_LBB (asm_out_file, line, n);
> -
> - do_block = n;
> - xcoffout_block (DECL_INITIAL (decl), 0, DECL_ARGUMENTS (decl));
> -}
> -
> -/* Describe the end line-number of an internal block within a function. */
> -
> -void
> -xcoffout_end_block (unsigned int line, unsigned int n)
> -{
> - if (n != 1)
> - ASM_OUTPUT_LBE (asm_out_file, line, n);
> -}
> -
> -/* Called at beginning of function (before prologue).
> - Declare function as needed for debugging. */
> -
> -void
> -xcoffout_declare_function (FILE *file, tree decl, const char *name)
> -{
> - size_t len;
> -
> - if (*name == '*')
> - name++;
> - len = strlen (name);
> - if (name[len - 1] == ']')
> - {
> - char *n = XALLOCAVEC (char, len - 3);
> - memcpy (n, name, len - 4);
> - n[len - 4] = '\0';
> - name = n;
> - }
> -
> - /* Any pending .bi or .ei must occur before the .function pseudo op.
> - Otherwise debuggers will think that the function is in the previous
> - file and/or at the wrong line number. */
> - xcoffout_source_file (file, DECL_SOURCE_FILE (decl), 0);
> - dbxout_symbol (decl, 0);
> -
> - /* .function NAME, TOP, MAPPING, TYPE, SIZE
> - 16 and 044 are placeholders for backwards compatibility */
> - fprintf (file, "\t.function .%s,.%s,16,044,FE..%s-.%s\n",
> - name, name, name, name);
> -}
> -
> -/* Called at beginning of function body (at start of prologue).
> - Record the function's starting line number, so we can output
> - relative line numbers for the other lines.
> - Record the file name that this function is contained in. */
> -
> -void
> -xcoffout_begin_prologue (unsigned int line,
> - unsigned int column ATTRIBUTE_UNUSED,
> - const char *file ATTRIBUTE_UNUSED)
> -{
> - ASM_OUTPUT_LFB (asm_out_file, line);
> - dbxout_parms (DECL_ARGUMENTS (current_function_decl));
> -
> - /* Emit the symbols for the outermost BLOCK's variables. sdbout.c did this
> - in sdbout_begin_block, but there is no guarantee that there will be any
> - inner block 1, so we must do it here. This gives a result similar to
> - dbxout, so it does make some sense. */
> - do_block = BLOCK_NUMBER (DECL_INITIAL (current_function_decl));
> - xcoffout_block (DECL_INITIAL (current_function_decl), 0,
> - DECL_ARGUMENTS (current_function_decl));
> -
> - ASM_OUTPUT_LINE (asm_out_file, line);
> -}
> -
> -/* Called at end of function (before epilogue).
> - Describe end of outermost block. */
> -
> -void
> -xcoffout_end_function (unsigned int last_linenum)
> -{
> - ASM_OUTPUT_LFE (asm_out_file, last_linenum);
> -}
> -
> -/* Output xcoff info for the absolute end of a function.
> - Called after the epilogue is output. */
> -
> -void
> -xcoffout_end_epilogue (unsigned int line ATTRIBUTE_UNUSED,
> - const char *file ATTRIBUTE_UNUSED)
> -{
> - /* We need to pass the correct function size to .function, otherwise,
> - the xas assembler can't figure out the correct size for the function
> - aux entry. So, we emit a label after the last instruction which can
> - be used by the .function pseudo op to calculate the function size. */
> -
> - const char *fname = XSTR (XEXP (DECL_RTL (current_function_decl), 0), 0);
> - if (*fname == '*')
> - ++fname;
> - fprintf (asm_out_file, "FE..");
> - ASM_OUTPUT_LABEL (asm_out_file, fname);
> -}
> -#endif /* XCOFF_DEBUGGING_INFO */
> diff --git a/gcc/xcoffout.h b/gcc/xcoffout.h
> deleted file mode 100644
> index f28e83ea9fc..00000000000
> --- a/gcc/xcoffout.h
> +++ /dev/null
> @@ -1,194 +0,0 @@
> -/* XCOFF definitions. These are needed in dbxout.cc, final.cc,
> - and xcoffout.h.
> - Copyright (C) 1998-2022 Free Software Foundation, Inc.
> -
> -This file is part of GCC.
> -
> -GCC is free software; you can redistribute it and/or modify it under
> -the terms of the GNU General Public License as published by the Free
> -Software Foundation; either version 3, or (at your option) any later
> -version.
> -
> -GCC is distributed in the hope that it will be useful, but WITHOUT ANY
> -WARRANTY; without even the implied warranty of MERCHANTABILITY or
> -FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> -for more details.
> -
> -You should have received a copy of the GNU General Public License
> -along with GCC; see the file COPYING3. If not see
> -<http://www.gnu.org/licenses/>. */
> -
> -#ifndef GCC_XCOFFOUT_H
> -#define GCC_XCOFFOUT_H
> -
> -/* Tags and typedefs are C_DECL in XCOFF, not C_LSYM. */
> -
> -#define DBX_TYPE_DECL_STABS_CODE N_DECL
> -
> -/* Use the XCOFF predefined type numbers. */
> -
> -#define DBX_ASSIGN_FUNDAMENTAL_TYPE_NUMBER(TYPE) \
> - xcoff_assign_fundamental_type_number (TYPE)
> -
> -/* Any type with a negative type index has already been output. */
> -
> -#define DBX_TYPE_DEFINED(TYPE) (TYPE_SYMTAB_ADDRESS (TYPE) < 0)
> -
> -/* Must use N_STSYM for static const variables (those in the text section)
> - instead of N_FUN. */
> -
> -#define DBX_STATIC_CONST_VAR_CODE N_STSYM
> -
> -/* For static variables, output code to define the start of a static block. */
> -
> -#define DBX_STATIC_BLOCK_START(ASMFILE,CODE) \
> -{ \
> - if ((CODE) == N_STSYM) \
> - fprintf ((ASMFILE), "\t.bs\t%s[RW]\n", xcoff_private_data_section_name);\
> - else if ((CODE) == N_LCSYM) \
> - fprintf ((ASMFILE), "\t.bs\t%s\n", xcoff_bss_section_name); \
> -}
> -
> -/* For static variables, output code to define the end of a static block. */
> -
> -#define DBX_STATIC_BLOCK_END(ASMFILE,CODE) \
> -{ \
> - if ((CODE) == N_STSYM || (CODE) == N_LCSYM) \
> - fputs ("\t.es\n", (ASMFILE)); \
> -}
> -
> -/* We must use N_RPYSM instead of N_RSYM for register parameters. */
> -
> -#define DBX_REGPARM_STABS_CODE N_RPSYM
> -
> -/* We must use 'R' instead of 'P' for register parameters. */
> -
> -#define DBX_REGPARM_STABS_LETTER 'R'
> -
> -/* Define our own finish symbol function, since xcoff stabs have their
> - own different format. */
> -
> -#define DBX_FINISH_STABS(SYM, CODE, LINE, ADDR, LABEL, NUMBER) do { \
> - if (ADDR) \
> - { \
> - /* If we are writing a function name, we must emit a dot in \
> - order to refer to the function code, not its descriptor. */ \
> - if (CODE == N_FUN) \
> - putc ('.', asm_out_file); \
> - \
> - /* If we are writing a function name, we must ensure that \
> - there is no storage-class suffix on the name. */ \
> - if (CODE == N_FUN && GET_CODE (ADDR) == SYMBOL_REF) \
> - { \
> - const char *_p = XSTR (ADDR, 0); \
> - if (*_p == '*') \
> - fputs (_p+1, asm_out_file); \
> - else \
> - for (; *_p != '[' && *_p; _p++) \
> - putc (*_p != '$' ? *_p : '_', asm_out_file); \
> - } \
> - else \
> - output_addr_const (asm_out_file, ADDR); \
> - } \
> - /* Another special case: N_GSYM always gets the symbol name, \
> - whether or not LABEL or NUMBER are set. */ \
> - else if (CODE == N_GSYM) \
> - assemble_name (asm_out_file, XSTR (XEXP (DECL_RTL (SYM), 0), 0)); \
> - else if (LABEL) \
> - assemble_name (asm_out_file, LABEL); \
> - else \
> - dbxout_int (NUMBER); \
> - putc (',', asm_out_file); \
> - dbxout_int (stab_to_sclass (CODE)); \
> - fputs (",0\n", asm_out_file); \
> -} while (0)
> -
> -/* These are IBM XCOFF extensions we need to reference in dbxout.cc
> - and xcoffout.cc. */
> -
> -/* AIX XCOFF uses this for typedefs. This can have any value, since it is
> - only used for translation into a C_DECL storage class. */
> -#ifndef N_DECL
> -#define N_DECL 0x8c
> -#endif
> -/* AIX XCOFF uses this for parameters passed in registers. This can have
> - any value, since it is only used for translation into a C_RPSYM storage
> - class. */
> -#ifndef N_RPSYM
> -#define N_RPSYM 0x8e
> -#endif
> -
> -/* Name of the current include file. */
> -
> -extern const char *xcoff_current_include_file;
> -
> -/* Names of bss and data sections. These should be unique names for each
> - compilation unit. */
> -
> -extern char *xcoff_bss_section_name;
> -extern char *xcoff_private_data_section_name;
> -extern char *xcoff_private_rodata_section_name;
> -extern char *xcoff_tls_data_section_name;
> -extern char *xcoff_read_only_section_name;
> -
> -/* Last source file name mentioned in a NOTE insn. */
> -
> -extern const char *xcoff_lastfile;
> -
> -/* Don't write out path name for main source file. */
> -#define NO_DBX_MAIN_SOURCE_DIRECTORY 1
> -
> -/* Write out main source file name using ".file" rather than ".stabs".
> - We don't actually do this here, because the assembler gets confused if there
> - is more than one .file directive. rs6000_xcoff_file_start is already
> - emitting a .file directory, so we don't output one here also.
> - Initialize xcoff_lastfile. */
> -#define DBX_OUTPUT_MAIN_SOURCE_FILENAME(FILE,FILENAME) \
> - xcoff_lastfile = (FILENAME)
> -
> -/* If we are still in an include file, its end must be marked. */
> -#define DBX_OUTPUT_MAIN_SOURCE_FILE_END(FILE, FILENAME) \
> -do { \
> - if (xcoff_current_include_file) \
> - { \
> - fputs ("\t.ei\t", (FILE)); \
> - output_quoted_string ((FILE), xcoff_current_include_file); \
> - putc ('\n', (FILE)); \
> - xcoff_current_include_file = NULL; \
> - } \
> -} while (0)
> -
> -/* Do not emit any marker for XCOFF until assembler allows XFT_CV. */
> -#define NO_DBX_GCC_MARKER
> -
> -/* XCOFF32 maximum length is 64K; XLC limits to 16K. */
> -#define DBX_CONTIN_LENGTH 16384
> -
> -/* XLC uses '?' as continuation character. */
> -#define DBX_CONTIN_CHAR '?'
> -
> -/* Don't try to use the `x' type-cross-reference character in DBX data.
> - Also has the consequence of putting each struct, union or enum
> - into a separate .stabs, containing only cross-refs to the others. */
> -#define DBX_NO_XREFS
> -
> -/* We must put stabs in the text section. If we don't the assembler
> - won't handle them correctly; it will sometimes put stabs where gdb
> - can't find them. */
> -
> -#define DEBUG_SYMS_TEXT
> -
> -/* Prototype functions in xcoffout.cc. */
> -
> -extern int stab_to_sclass (int);
> -extern void xcoffout_begin_prologue (unsigned int, unsigned int, const char *);
> -extern void xcoffout_begin_block (unsigned, unsigned);
> -extern void xcoffout_end_epilogue (unsigned int, const char *);
> -extern void xcoffout_end_function (unsigned int);
> -extern void xcoffout_end_block (unsigned, unsigned);
> -extern int xcoff_assign_fundamental_type_number (tree);
> -extern void xcoffout_declare_function (FILE *, tree, const char *);
> -extern void xcoffout_source_line (unsigned int, unsigned int, const char *,
> - int, bool);
> -
> -#endif /* GCC_XCOFFOUT_H */
> --
> 2.37.2
>
>
On 9/1/22 13:18, Richard Biener wrote:
> I presume WarnRemoved will diagnose use of -gstabs but not fail
> compilation. Will -gstabs then still enable -g (with the default debug
> format)?
No, it won't set -g option.
>
> Please followup with a gcc-13/changes.html entry.
Sure.
>
> I notice we have VMS_DEBUGGING_INFO left. From a quick look
> it is used by alpha*-dec-* (exclusively) and ia64-hp-*vms* (maybe
> also supports DWARF, it is ELF at least). One of the goals of
> non-DWARF removal was to get rid of debug hooks and instead allow
> "free-form" early debug generation from the frontends.
Can you please explain what you mean by the free-form and what's expected
to do with the VMS_DEBUGGING_INFO macro?
Cheers,
Martin
On Fri, Sep 2, 2022 at 9:00 AM Martin Liška <mliska@suse.cz> wrote:
>
> On 9/1/22 13:18, Richard Biener wrote:
> > I presume WarnRemoved will diagnose use of -gstabs but not fail
> > compilation. Will -gstabs then still enable -g (with the default debug
> > format)?
>
> No, it won't set -g option.
That was the usual side-effect - I wonder if we want to emit extra
diagnostic when one of the obsolete options is given but -g is not
enabled in the end or whether we want to preserve the debug info
enablement effect?
> >
> > Please followup with a gcc-13/changes.html entry.
>
> Sure.
>
> >
> > I notice we have VMS_DEBUGGING_INFO left. From a quick look
> > it is used by alpha*-dec-* (exclusively) and ia64-hp-*vms* (maybe
> > also supports DWARF, it is ELF at least). One of the goals of
> > non-DWARF removal was to get rid of debug hooks and instead allow
> > "free-form" early debug generation from the frontends.
>
> Can you please explain what you mean by the free-form and what's expected
> to do with the VMS_DEBUGGING_INFO macro?
Well, VMS debugging would go, just like STABS. With "free-form" I mean
that frontend code could call into the dwarf2out API directly, creating
DWARF DIEs for language specific info (we probably want to export more
and/or nicer APIs for such use).
Richard.
> Cheers,
> Martin
On 9/2/22 10:54, Richard Biener wrote:
> On Fri, Sep 2, 2022 at 9:00 AM Martin Liška <mliska@suse.cz> wrote:
>>
>> On 9/1/22 13:18, Richard Biener wrote:
>>> I presume WarnRemoved will diagnose use of -gstabs but not fail
>>> compilation. Will -gstabs then still enable -g (with the default debug
>>> format)?
>>
>> No, it won't set -g option.
>
> That was the usual side-effect - I wonder if we want to emit extra
> diagnostic when one of the obsolete options is given but -g is not
> enabled in the end or whether we want to preserve the debug info
> enablement effect?
I would leave it for now and see if somebody would complain about
the current behavior.
>
>>>
>>> Please followup with a gcc-13/changes.html entry.
>>
>> Sure.
>>
>>>
>>> I notice we have VMS_DEBUGGING_INFO left. From a quick look
>>> it is used by alpha*-dec-* (exclusively) and ia64-hp-*vms* (maybe
>>> also supports DWARF, it is ELF at least). One of the goals of
>>> non-DWARF removal was to get rid of debug hooks and instead allow
>>> "free-form" early debug generation from the frontends.
>>
>> Can you please explain what you mean by the free-form and what's expected
>> to do with the VMS_DEBUGGING_INFO macro?
>
> Well, VMS debugging would go, just like STABS.
Can go now, or shall we deprecate it in GCC 13 first?
> With "free-form" I mean
> that frontend code could call into the dwarf2out API directly, creating
> DWARF DIEs for language specific info (we probably want to export more
> and/or nicer APIs for such use).
Ok, so bypassing dwarf2_debug_hooks, right? I can leave it to you such API
improvement. What do you think?
Cheers,
Martin
>
> Richard.
>
>> Cheers,
>> Martin
On Mon, Sep 5, 2022 at 9:59 AM Martin Liška <mliska@suse.cz> wrote:
>
> On 9/2/22 10:54, Richard Biener wrote:
> > On Fri, Sep 2, 2022 at 9:00 AM Martin Liška <mliska@suse.cz> wrote:
> >>
> >> On 9/1/22 13:18, Richard Biener wrote:
> >>> I presume WarnRemoved will diagnose use of -gstabs but not fail
> >>> compilation. Will -gstabs then still enable -g (with the default debug
> >>> format)?
> >>
> >> No, it won't set -g option.
> >
> > That was the usual side-effect - I wonder if we want to emit extra
> > diagnostic when one of the obsolete options is given but -g is not
> > enabled in the end or whether we want to preserve the debug info
> > enablement effect?
>
> I would leave it for now and see if somebody would complain about
> the current behavior.
>
> >
> >>>
> >>> Please followup with a gcc-13/changes.html entry.
> >>
> >> Sure.
> >>
> >>>
> >>> I notice we have VMS_DEBUGGING_INFO left. From a quick look
> >>> it is used by alpha*-dec-* (exclusively) and ia64-hp-*vms* (maybe
> >>> also supports DWARF, it is ELF at least). One of the goals of
> >>> non-DWARF removal was to get rid of debug hooks and instead allow
> >>> "free-form" early debug generation from the frontends.
> >>
> >> Can you please explain what you mean by the free-form and what's expected
> >> to do with the VMS_DEBUGGING_INFO macro?
> >
> > Well, VMS debugging would go, just like STABS.
>
> Can go now, or shall we deprecate it in GCC 13 first?
Let's ask VMS maintainers - what's the state of DWARF support in VMS?
Is there active use of alpha*-dec-* or ia64-hp-*vms*?
> > With "free-form" I mean
> > that frontend code could call into the dwarf2out API directly, creating
> > DWARF DIEs for language specific info (we probably want to export more
> > and/or nicer APIs for such use).
>
> Ok, so bypassing dwarf2_debug_hooks, right? I can leave it to you such API
> improvement. What do you think?
Sure, it shouldn't be part of this series.
Richard.
> Cheers,
> Martin
>
> >
> > Richard.
> >
> >> Cheers,
> >> Martin
>
Hi!
On 2022-09-01T12:05:23+0200, Martin Liška <mliska@suse.cz> wrote:
> gcc/ChangeLog:
> --- a/gcc/system.h
> +++ b/gcc/system.h
> @@ -1009,8 +1009,7 @@ extern void fancy_abort (const char *, int, const char *)
> ASM_OUTPUT_DEFINE_LABEL_DIFFERENCE_SYMBOL HOST_WORDS_BIG_ENDIAN \
> OBJC_PROLOGUE ALLOCATE_TRAMPOLINE HANDLE_PRAGMA ROUND_TYPE_SIZE \
> ROUND_TYPE_SIZE_UNIT CONST_SECTION_ASM_OP CRT_GET_RFIB_TEXT \
> - DBX_LBRAC_FIRST DBX_OUTPUT_ENUM DBX_OUTPUT_SOURCE_FILENAME \
> - DBX_WORKING_DIRECTORY INSN_CACHE_DEPTH INSN_CACHE_SIZE \
> + INSN_CACHE_DEPTH INSN_CACHE_SIZE \
> INSN_CACHE_LINE_WIDTH INIT_SECTION_PREAMBLE NEED_ATEXIT ON_EXIT \
> EXIT_BODY OBJECT_FORMAT_ROSE MULTIBYTE_CHARS MAP_CHARACTER \
> LIBGCC_NEEDS_DOUBLE FINAL_PRESCAN_LABEL DEFAULT_CALLER_SAVES \
> @@ -1023,15 +1022,14 @@ extern void fancy_abort (const char *, int, const char *)
> MAX_WCHAR_TYPE_SIZE SHARED_SECTION_ASM_OP INTEGRATE_THRESHOLD \
> FINAL_REG_PARM_STACK_SPACE MAYBE_REG_PARM_STACK_SPACE \
> TRADITIONAL_PIPELINE_INTERFACE DFA_PIPELINE_INTERFACE \
> - DBX_OUTPUT_STANDARD_TYPES BUILTIN_SETJMP_FRAME_VALUE \
> + BUILTIN_SETJMP_FRAME_VALUE \
> SUNOS4_SHARED_LIBRARIES PROMOTE_FOR_CALL_ONLY \
> SPACE_AFTER_L_OPTION NO_RECURSIVE_FUNCTION_CSE \
> DEFAULT_MAIN_RETURN TARGET_MEM_FUNCTIONS EXPAND_BUILTIN_VA_ARG \
> COLLECT_PARSE_FLAG DWARF2_GENERATE_TEXT_SECTION_LABEL WINNING_GDB \
> ASM_OUTPUT_FILENAME ASM_OUTPUT_SOURCE_LINE FILE_NAME_JOINER \
> - GDB_INV_REF_REGPARM_STABS_LETTER DBX_MEMPARM_STABS_LETTER \
> - PUT_SDB_SRC_FILE STABS_GCC_MARKER DBX_OUTPUT_FUNCTION_END \
> - DBX_OUTPUT_GCC_MARKER DBX_FINISH_SYMBOL SDB_GENERATE_FAKE \
> + GDB_INV_REF_REGPARM_STABS_LETTER \
> + PUT_SDB_SRC_FILE STABS_GCC_MARKER SDB_GENERATE_FAKE \
> NON_SAVING_SETJMP TARGET_LATE_RTL_PROLOGUE_EPILOGUE \
> CASE_DROPS_THROUGH TARGET_BELL TARGET_BS TARGET_CR TARGET_DIGIT0 \
> TARGET_ESC TARGET_FF TARGET_NEWLINE TARGET_TAB TARGET_VT \
> @@ -1056,8 +1054,8 @@ extern void fancy_abort (const char *, int, const char *)
> PREFERRED_OUTPUT_RELOAD_CLASS SYSTEM_INCLUDE_DIR \
> STANDARD_INCLUDE_DIR STANDARD_INCLUDE_COMPONENT \
> LINK_ELIMINATE_DUPLICATE_LDIRECTORIES MIPS_DEBUGGING_INFO \
> - IDENT_ASM_OP ALL_COP_ADDITIONAL_REGISTER_NAMES DBX_OUTPUT_LBRAC \
> - DBX_OUTPUT_NFUN DBX_OUTPUT_RBRAC RANGE_TEST_NON_SHORT_CIRCUIT \
> + IDENT_ASM_OP ALL_COP_ADDITIONAL_REGISTER_NAMES \
> + RANGE_TEST_NON_SHORT_CIRCUIT \
> REAL_VALUE_TRUNCATE REVERSE_CONDEXEC_PREDICATES_P \
> TARGET_ALIGN_ANON_BITFIELDS TARGET_NARROW_VOLATILE_BITFIELDS \
> IDENT_ASM_OP UNALIGNED_SHORT_ASM_OP UNALIGNED_INT_ASM_OP \
These changes are part of
commit r13-2361-g7e0db0cdf01e9c885a29cb37415f5bc00d90c029
"STABS: remove -gstabs and -gxcoff functionality". What this does is
remove these identifiers from "poisoning":
/* As the last action in this file, we poison the identifiers that
shouldn't be used.
[...]
/* Other obsolete target macros, or macros that used to be in target
headers and were not used, and may be obsolete or may never have
been used. */
#pragma GCC poison [...]
Shouldn't these identifiers actually stay (so that any accidental future
use gets flagged, as I understand this machinery), and instead more
identifiers be added potentially: those where their definition/use got
removed with "STABS: remove -gstabs and -gxcoff functionality"? (I've
not checked.)
Grüße
Thomas
-----------------
Siemens Electronic Design Automation GmbH; Anschrift: Arnulfstraße 201, 80634 München; Gesellschaft mit beschränkter Haftung; Geschäftsführer: Thomas Heurung, Frank Thürauf; Sitz der Gesellschaft: München; Registergericht München, HRB 106955
On 11/4/22 10:32, Thomas Schwinge wrote:
> Hi!
>
> On 2022-09-01T12:05:23+0200, Martin Liška <mliska@suse.cz> wrote:
>> gcc/ChangeLog:
>
>> --- a/gcc/system.h
>> +++ b/gcc/system.h
>> @@ -1009,8 +1009,7 @@ extern void fancy_abort (const char *, int, const char *)
>> ASM_OUTPUT_DEFINE_LABEL_DIFFERENCE_SYMBOL HOST_WORDS_BIG_ENDIAN \
>> OBJC_PROLOGUE ALLOCATE_TRAMPOLINE HANDLE_PRAGMA ROUND_TYPE_SIZE \
>> ROUND_TYPE_SIZE_UNIT CONST_SECTION_ASM_OP CRT_GET_RFIB_TEXT \
>> - DBX_LBRAC_FIRST DBX_OUTPUT_ENUM DBX_OUTPUT_SOURCE_FILENAME \
>> - DBX_WORKING_DIRECTORY INSN_CACHE_DEPTH INSN_CACHE_SIZE \
>> + INSN_CACHE_DEPTH INSN_CACHE_SIZE \
>> INSN_CACHE_LINE_WIDTH INIT_SECTION_PREAMBLE NEED_ATEXIT ON_EXIT \
>> EXIT_BODY OBJECT_FORMAT_ROSE MULTIBYTE_CHARS MAP_CHARACTER \
>> LIBGCC_NEEDS_DOUBLE FINAL_PRESCAN_LABEL DEFAULT_CALLER_SAVES \
>> @@ -1023,15 +1022,14 @@ extern void fancy_abort (const char *, int, const char *)
>> MAX_WCHAR_TYPE_SIZE SHARED_SECTION_ASM_OP INTEGRATE_THRESHOLD \
>> FINAL_REG_PARM_STACK_SPACE MAYBE_REG_PARM_STACK_SPACE \
>> TRADITIONAL_PIPELINE_INTERFACE DFA_PIPELINE_INTERFACE \
>> - DBX_OUTPUT_STANDARD_TYPES BUILTIN_SETJMP_FRAME_VALUE \
>> + BUILTIN_SETJMP_FRAME_VALUE \
>> SUNOS4_SHARED_LIBRARIES PROMOTE_FOR_CALL_ONLY \
>> SPACE_AFTER_L_OPTION NO_RECURSIVE_FUNCTION_CSE \
>> DEFAULT_MAIN_RETURN TARGET_MEM_FUNCTIONS EXPAND_BUILTIN_VA_ARG \
>> COLLECT_PARSE_FLAG DWARF2_GENERATE_TEXT_SECTION_LABEL WINNING_GDB \
>> ASM_OUTPUT_FILENAME ASM_OUTPUT_SOURCE_LINE FILE_NAME_JOINER \
>> - GDB_INV_REF_REGPARM_STABS_LETTER DBX_MEMPARM_STABS_LETTER \
>> - PUT_SDB_SRC_FILE STABS_GCC_MARKER DBX_OUTPUT_FUNCTION_END \
>> - DBX_OUTPUT_GCC_MARKER DBX_FINISH_SYMBOL SDB_GENERATE_FAKE \
>> + GDB_INV_REF_REGPARM_STABS_LETTER \
>> + PUT_SDB_SRC_FILE STABS_GCC_MARKER SDB_GENERATE_FAKE \
>> NON_SAVING_SETJMP TARGET_LATE_RTL_PROLOGUE_EPILOGUE \
>> CASE_DROPS_THROUGH TARGET_BELL TARGET_BS TARGET_CR TARGET_DIGIT0 \
>> TARGET_ESC TARGET_FF TARGET_NEWLINE TARGET_TAB TARGET_VT \
>> @@ -1056,8 +1054,8 @@ extern void fancy_abort (const char *, int, const char *)
>> PREFERRED_OUTPUT_RELOAD_CLASS SYSTEM_INCLUDE_DIR \
>> STANDARD_INCLUDE_DIR STANDARD_INCLUDE_COMPONENT \
>> LINK_ELIMINATE_DUPLICATE_LDIRECTORIES MIPS_DEBUGGING_INFO \
>> - IDENT_ASM_OP ALL_COP_ADDITIONAL_REGISTER_NAMES DBX_OUTPUT_LBRAC \
>> - DBX_OUTPUT_NFUN DBX_OUTPUT_RBRAC RANGE_TEST_NON_SHORT_CIRCUIT \
>> + IDENT_ASM_OP ALL_COP_ADDITIONAL_REGISTER_NAMES \
>> + RANGE_TEST_NON_SHORT_CIRCUIT \
>> REAL_VALUE_TRUNCATE REVERSE_CONDEXEC_PREDICATES_P \
>> TARGET_ALIGN_ANON_BITFIELDS TARGET_NARROW_VOLATILE_BITFIELDS \
>> IDENT_ASM_OP UNALIGNED_SHORT_ASM_OP UNALIGNED_INT_ASM_OP \
>
> These changes are part of
> commit r13-2361-g7e0db0cdf01e9c885a29cb37415f5bc00d90c029
> "STABS: remove -gstabs and -gxcoff functionality". What this does is
> remove these identifiers from "poisoning":
>
> /* As the last action in this file, we poison the identifiers that
> shouldn't be used.
> [...]
> /* Other obsolete target macros, or macros that used to be in target
> headers and were not used, and may be obsolete or may never have
> been used. */
> #pragma GCC poison [...]
>
> Shouldn't these identifiers actually stay (so that any accidental future
> use gets flagged, as I understand this machinery), and instead more
> identifiers be added potentially: those where their definition/use got
> removed with "STABS: remove -gstabs and -gxcoff functionality"? (I've
> not checked.)
Well, the identifiers are not used any longer, so I don't think we should
poison them. Or do I miss something?
Martin
>
>
> Grüße
> Thomas
> -----------------
> Siemens Electronic Design Automation GmbH; Anschrift: Arnulfstraße 201, 80634 München; Gesellschaft mit beschränkter Haftung; Geschäftsführer: Thomas Heurung, Frank Thürauf; Sitz der Gesellschaft: München; Registergericht München, HRB 106955
Hello,
On Thu, 10 Nov 2022, Martin Liška wrote:
> > These changes are part of
> > commit r13-2361-g7e0db0cdf01e9c885a29cb37415f5bc00d90c029
> > "STABS: remove -gstabs and -gxcoff functionality". What this does is
> > remove these identifiers from "poisoning":
> >
> > /* As the last action in this file, we poison the identifiers that
> > shouldn't be used.
> > [...]
> > /* Other obsolete target macros, or macros that used to be in target
> > headers and were not used, and may be obsolete or may never have
> > been used. */
> > #pragma GCC poison [...]
> >
> > Shouldn't these identifiers actually stay (so that any accidental future
> > use gets flagged, as I understand this machinery), and instead more
> > identifiers be added potentially: those where their definition/use got
> > removed with "STABS: remove -gstabs and -gxcoff functionality"? (I've
> > not checked.)
>
> Well, the identifiers are not used any longer, so I don't think we should
> poison them. Or do I miss something?
It's the very nature of poisoned identifiers that they aren't used (every
use would get flagged as error). The point of poisoning them is to avoid
future new uses to creep in (e.g. via mislead back- or forward-ports,
which can for instance happen easily with backend macros when an
out-of-tree port is eventually tried to be integrated). Hence, generally
the list of those identifiers is only extended, never reduced. (There may
be exceptions of course)
Ciao,
Michael.
On 11/10/22 15:12, Michael Matz wrote:
> Hello,
>
> On Thu, 10 Nov 2022, Martin Liška wrote:
>
>>> These changes are part of
>>> commit r13-2361-g7e0db0cdf01e9c885a29cb37415f5bc00d90c029
>>> "STABS: remove -gstabs and -gxcoff functionality". What this does is
>>> remove these identifiers from "poisoning":
>>>
>>> /* As the last action in this file, we poison the identifiers that
>>> shouldn't be used.
>>> [...]
>>> /* Other obsolete target macros, or macros that used to be in target
>>> headers and were not used, and may be obsolete or may never have
>>> been used. */
>>> #pragma GCC poison [...]
>>>
>>> Shouldn't these identifiers actually stay (so that any accidental future
>>> use gets flagged, as I understand this machinery), and instead more
>>> identifiers be added potentially: those where their definition/use got
>>> removed with "STABS: remove -gstabs and -gxcoff functionality"? (I've
>>> not checked.)
>>
>> Well, the identifiers are not used any longer, so I don't think we should
>> poison them. Or do I miss something?
>
> It's the very nature of poisoned identifiers that they aren't used (every
> use would get flagged as error). The point of poisoning them is to avoid
> future new uses to creep in (e.g. via mislead back- or forward-ports,
> which can for instance happen easily with backend macros when an
> out-of-tree port is eventually tried to be integrated). Hence, generally
> the list of those identifiers is only extended, never reduced. (There may
> be exceptions of course)
Ahh, ok, makes sense. So Thomas, please put them back to the poisoned list.
Martin
>
>
> Ciao,
> Michael.
@@ -1353,7 +1353,6 @@ OBJS = \
data-streamer.o \
data-streamer-in.o \
data-streamer-out.o \
- dbxout.o \
dbgcnt.o \
dce.o \
ddg.o \
@@ -1727,7 +1726,6 @@ OBJS = \
web.o \
wide-int.o \
wide-int-print.o \
- xcoffout.o \
$(out_object_file) \
$(ANALYZER_OBJS) \
$(EXTRA_OBJS) \
@@ -2676,7 +2674,7 @@ GTFILES = $(CPPLIB_H) $(srcdir)/input.h $(srcdir)/coretypes.h \
$(srcdir)/reload.h $(srcdir)/caller-save.cc $(srcdir)/symtab.cc \
$(srcdir)/alias.cc $(srcdir)/bitmap.cc $(srcdir)/cselib.cc $(srcdir)/cgraph.cc \
$(srcdir)/ipa-prop.cc $(srcdir)/ipa-cp.cc $(srcdir)/ipa-utils.h \
- $(srcdir)/ipa-param-manipulation.h $(srcdir)/ipa-sra.cc $(srcdir)/dbxout.cc \
+ $(srcdir)/ipa-param-manipulation.h $(srcdir)/ipa-sra.cc \
$(srcdir)/ipa-modref.h $(srcdir)/ipa-modref.cc \
$(srcdir)/ipa-modref-tree.h \
$(srcdir)/signop.h \
@@ -2784,13 +2784,6 @@ scan_prog_file (const char *prog_name, scanpass which_pass,
if ((name = ldgetname (ldptr, &symbol)) == NULL)
continue; /* Should never happen. */
-#ifdef XCOFF_DEBUGGING_INFO
- /* All AIX function names have a duplicate entry
- beginning with a dot. */
- if (*name == '.')
- ++name;
-#endif
-
switch (is_ctor_dtor (name))
{
#if TARGET_AIX_VERSION
@@ -122,12 +122,6 @@ uint32_t write_symbols = NO_DEBUG
Variable
enum debug_info_levels debug_info_level = DINFO_LEVEL_NONE
-; Nonzero means use GNU-only extensions in the generated symbolic
-; debugging information. Currently, this only has an effect when
-; write_symbols is set to DBX_DEBUG or XCOFF_DEBUG.
-Variable
-bool use_gnu_debug_info_extensions
-
; Level of CTF debugging information we are producing. See flag-types.h
; for the definitions of the different possible levels.
Variable
@@ -3323,7 +3317,7 @@ Common Driver JoinedOrMissing Negative(gdwarf-)
Generate debug information in default version of DWARF format.
gdwarf-
-Common Driver Joined UInteger Var(dwarf_version) Init(5) Negative(gstabs)
+Common Driver Joined UInteger Var(dwarf_version) Init(5)
Generate debug information in DWARF v2 (or later) format.
gdwarf32
@@ -3371,12 +3365,12 @@ Common Driver Var(dwarf_split_debug_info) Init(0)
Generate debug information in separate .dwo files.
gstabs
-Common Driver JoinedOrMissing Negative(gstabs+)
-Generate debug information in STABS format.
+Common Driver WarnRemoved
+Does nothing. Preserved for backward compatibility.
gstabs+
-Common Driver JoinedOrMissing Negative(gvms)
-Generate debug information in extended STABS format.
+Common Driver WarnRemoved
+Does nothing. Preserved for backward compatibility.
gstatement-frontiers
Common Driver Var(debug_nonbind_markers_p) PerFunction
@@ -3402,16 +3396,16 @@ gvariable-location-views=incompat5
Common Driver RejectNegative Var(debug_variable_location_views, -1) Init(2)
gvms
-Common Driver JoinedOrMissing Negative(gxcoff)
+Common Driver JoinedOrMissing
Generate debug information in VMS format.
gxcoff
-Common Driver JoinedOrMissing Negative(gxcoff+)
-Generate debug information in XCOFF format.
+Common Driver WarnRemoved
+Does nothing. Preserved for backward compatibility.
gxcoff+
-Common Driver JoinedOrMissing Negative(gdwarf)
-Generate debug information in extended XCOFF format.
+Common Driver JoinedOrMissing WarnRemoved
+Does nothing. Preserved for backward compatibility.
Enum
Name(compressed_debug_sections) Type(int)
@@ -72,10 +72,10 @@
# tm_file A list of target macro files, if different from
# "$cpu_type/$cpu_type.h". Usually it's constructed
# per target in a way like this:
-# tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type.h}/elf.h"
+# tm_file="${tm_file} elfos.h ${cpu_type.h}/elf.h"
# Note that the preferred order is:
# - specific target header "${cpu_type}/${cpu_type.h}"
-# - generic headers like dbxelf.h elfos.h, etc.
+# - generic headers like elfos.h, etc.
# - specializing target headers like ${cpu_type.h}/elf.h
# This helps to keep OS specific stuff out of the CPU
# defining header ${cpu_type}/${cpu_type.h}.
@@ -956,7 +956,7 @@ case ${target} in
*-*-solaris2*)
# i?86-*-solaris2* needs to insert headers between cpu default and
# Solaris 2 specific ones.
- sol2_tm_file_head="dbxelf.h elfos.h ${cpu_type}/sysv4.h"
+ sol2_tm_file_head="elfos.h ${cpu_type}/sysv4.h"
sol2_tm_file_tail="${cpu_type}/sol2.h sol2.h"
sol2_tm_file="${sol2_tm_file_head} ${sol2_tm_file_tail}"
case ${target} in
@@ -1080,7 +1080,7 @@ esac
case ${target} in
aarch64*-*-elf | aarch64*-*-fuchsia* | aarch64*-*-rtems*)
- tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h"
+ tm_file="${tm_file} elfos.h newlib-stdint.h"
tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-elf-raw.h"
tmake_file="${tmake_file} aarch64/t-aarch64"
case $target in
@@ -1117,19 +1117,19 @@ aarch64*-*-elf | aarch64*-*-fuchsia* | aarch64*-*-rtems*)
TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
;;
aarch64*-*-freebsd*)
- tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file}"
+ tm_file="${tm_file} elfos.h ${fbsd_tm_file}"
tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-freebsd.h"
tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-freebsd"
tm_defines="${tm_defines} TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1"
;;
aarch64*-*-netbsd*)
- tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file}"
+ tm_file="${tm_file} elfos.h ${nbsd_tm_file}"
tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-netbsd.h"
tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-netbsd"
extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
;;
aarch64*-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h"
+ tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h"
tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-linux.h"
tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-linux"
tm_defines="${tm_defines} TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1"
@@ -1185,7 +1185,7 @@ alpha*-dec-*vms*)
tmake_file="${tmake_file} alpha/t-vms alpha/t-alpha"
;;
arc*-*-elf*)
- tm_file="arc/arc-arch.h dbxelf.h elfos.h newlib-stdint.h arc/elf.h ${tm_file}"
+ tm_file="arc/arc-arch.h elfos.h newlib-stdint.h arc/elf.h ${tm_file}"
tmake_file="arc/t-multilib arc/t-arc"
extra_gcc_objs="driver-arc.o"
if test "x$with_cpu" != x; then
@@ -1206,7 +1206,7 @@ arc*-*-elf*)
esac
;;
arc*-*-linux*)
- tm_file="arc/arc-arch.h dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arc/linux.h ${tm_file}"
+ tm_file="arc/arc-arch.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arc/linux.h ${tm_file}"
tmake_file="${tmake_file} arc/t-multilib-linux arc/t-arc"
extra_gcc_objs="driver-arc.o"
if test "x$with_cpu" != x; then
@@ -1242,7 +1242,7 @@ arm-wrs-vxworks7*)
need_64bit_hwint=yes
;;
arm*-*-freebsd*) # ARM FreeBSD EABI
- tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h"
+ tm_file="elfos.h ${fbsd_tm_file} arm/elf.h"
case $target in
arm*b-*-freebsd*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
@@ -1270,7 +1270,7 @@ arm*-*-freebsd*) # ARM FreeBSD EABI
arm*-*-netbsdelf*)
target_cpu_cname="strongarm"
tmake_file="${tmake_file} arm/t-arm"
- tm_file="dbxelf.h elfos.h ${nbsd_tm_file} arm/elf.h"
+ tm_file="elfos.h ${nbsd_tm_file} arm/elf.h"
extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
case ${target} in
arm*eb-*) tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" ;;
@@ -1299,7 +1299,7 @@ arm*-*-netbsdelf*)
esac
;;
arm*-*-linux-* | arm*-*-uclinuxfdpiceabi)
- tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
+ tm_file="elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
extra_options="${extra_options} linux-android.opt"
case $target in
arm*b-*-linux*)
@@ -1337,7 +1337,7 @@ arm*-*-linux-* | arm*-*-uclinuxfdpiceabi)
with_tls=${with_tls:-gnu}
;;
arm*-*-uclinux*eabi*) # ARM ucLinux
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
+ tm_file="elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf arm/t-bpabi"
tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h arm/aout.h arm/arm.h"
target_cpu_cname="arm7tdmi"
@@ -1357,7 +1357,7 @@ arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtems* | arm*-*-fuchsia*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
esac
default_use_cxa_atexit=yes
- tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
+ tm_file="elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf"
target_cpu_cname="arm7tdmi"
case ${target} in
@@ -1386,7 +1386,7 @@ arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtems* | arm*-*-fuchsia*)
tm_file="${tm_file} arm/aout.h arm/arm.h"
;;
avr-*-*)
- tm_file="elfos.h avr/elf.h avr/avr-arch.h avr/avr.h avr/specs.h dbxelf.h avr/avr-stdint.h"
+ tm_file="elfos.h avr/elf.h avr/avr-arch.h avr/avr.h avr/specs.h avr/avr-stdint.h"
if test x${with_avrlibc} != xno; then
tm_file="${tm_file} ${cpu_type}/avrlibc.h"
tm_defines="${tm_defines} WITH_AVRLIBC"
@@ -1519,26 +1519,26 @@ avr-*-*)
extra_objs="avr-devices.o avr-log.o"
;;
bfin*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
+ tm_file="${tm_file} elfos.h newlib-stdint.h bfin/elf.h"
tmake_file=bfin/t-bfin-elf
use_collect2=no
;;
bfin*-uclinux*)
- tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h"
+ tm_file="${tm_file} elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h"
tmake_file=bfin/t-bfin-uclinux
use_collect2=no
;;
bfin*-linux-uclibc*)
- tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
+ tm_file="${tm_file} elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
tmake_file="${tmake_file} bfin/t-bfin-linux"
use_collect2=no
;;
bfin*-rtems*)
- tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h"
+ tm_file="${tm_file} elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h"
tmake_file="${tmake_file} bfin/t-rtems"
;;
bfin*-*)
- tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
+ tm_file="${tm_file} elfos.h newlib-stdint.h bfin/elf.h"
use_collect2=no
use_gcc_stdint=wrap
;;
@@ -1589,13 +1589,13 @@ csky-*-*)
case ${target} in
csky-*-elf*)
- tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} csky/csky-elf.h"
+ tm_file="elfos.h newlib-stdint.h ${tm_file} csky/csky-elf.h"
tmake_file="csky/t-csky csky/t-csky-elf"
default_use_cxa_atexit=no
use_gcc_stdint=wrap
;;
csky-*-linux*)
- tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} csky/csky-linux-elf.h"
+ tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} csky/csky-linux-elf.h"
tmake_file="${tmake_file} csky/t-csky csky/t-csky-linux"
case ${target} in
@@ -1622,7 +1622,7 @@ csky-*-*)
esac
;;
epiphany-*-elf | epiphany-*-rtems*)
- tm_file="dbxelf.h elfos.h ${tm_file}"
+ tm_file="elfos.h ${tm_file}"
tmake_file="${tmake_file} epiphany/t-epiphany"
case ${target} in
epiphany-*-rtems*)
@@ -1638,21 +1638,21 @@ epiphany-*-elf | epiphany-*-rtems*)
extra_headers="epiphany_intrinsics.h"
;;
fr30-*-elf)
- tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
+ tm_file="elfos.h newlib-stdint.h ${tm_file}"
;;
frv-*-elf)
- tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
+ tm_file="elfos.h newlib-stdint.h ${tm_file}"
tmake_file=frv/t-frv
;;
frv-*-*linux*)
- tm_file="dbxelf.h elfos.h ${tm_file} \
+ tm_file="elfos.h ${tm_file} \
gnu-user.h linux.h glibc-stdint.h frv/linux.h"
tmake_file="${tmake_file} frv/t-frv frv/t-linux"
;;
ft32-*-elf)
gas=yes
gnu_ld=yes
- tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
+ tm_file="elfos.h newlib-stdint.h ${tm_file}"
tmake_file="${tmake_file} ft32/t-ft32"
;;
amdgcn-*-amdhsa)
@@ -1680,23 +1680,23 @@ amdgcn-*-amdhsa)
moxie-*-elf)
gas=yes
gnu_ld=yes
- tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
+ tm_file="elfos.h newlib-stdint.h ${tm_file}"
tmake_file="${tmake_file} moxie/t-moxie"
;;
moxie-*-uclinux*)
gas=yes
gnu_ld=yes
- tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h"
+ tm_file="elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h"
tmake_file="${tmake_file} moxie/t-moxie"
;;
moxie-*-rtems*)
tmake_file="${tmake_file} moxie/t-moxie"
- tm_file="moxie/moxie.h dbxelf.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h"
+ tm_file="moxie/moxie.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h"
;;
moxie-*-moxiebox*)
gas=yes
gnu_ld=yes
- tm_file="${tm_file} dbxelf.h elfos.h moxie/moxiebox.h newlib-stdint.h"
+ tm_file="${tm_file} elfos.h moxie/moxiebox.h newlib-stdint.h"
tmake_file="${tmake_file} moxie/t-moxiebox"
;;
h8300-*-elf*)
@@ -1709,7 +1709,7 @@ h8300-*-linux*)
;;
hppa*64*-*-linux*)
target_cpu_default="MASK_PA_11|MASK_PA_20"
- tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \
+ tm_file="pa/pa64-start.h ${tm_file} elfos.h gnu-user.h linux.h \
glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
pa/pa64-linux.h"
tmake_file="${tmake_file} pa/t-pa pa/t-linux"
@@ -1718,14 +1718,14 @@ hppa*64*-*-linux*)
;;
hppa*-*-linux*)
target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS|MASK_CALLER_COPIES"
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
+ tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
pa/pa32-regs.h pa/pa32-linux.h"
tmake_file="${tmake_file} pa/t-pa pa/t-linux"
d_target_objs="${d_target_objs} pa-d.o"
;;
hppa*-*-openbsd*)
target_cpu_default="MASK_PA_11"
- tm_file="${tm_file} dbxelf.h elfos.h openbsd.h openbsd-stdint.h openbsd-libpthread.h \
+ tm_file="${tm_file} elfos.h openbsd.h openbsd-stdint.h openbsd-libpthread.h \
pa/pa-openbsd.h pa/pa32-regs.h pa/pa32-openbsd.h"
extra_options="${extra_options} openbsd.opt"
tmake_file="pa/t-pa"
@@ -1735,7 +1735,7 @@ hppa*-*-openbsd*)
;;
hppa*-*-netbsd*)
target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
- tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file} \
+ tm_file="${tm_file} elfos.h ${nbsd_tm_file} \
pa/pa-netbsd.h pa/pa32-regs.h pa/pa32-netbsd.h"
tmake_file="${tmake_file}"
tm_defines="${tm_defines} CHAR_FAST8=1 SHORT_FAST16=1"
@@ -1747,7 +1747,7 @@ hppa*64*-*-hpux11*)
then
target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
fi
- tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
+ tm_file="pa/pa64-start.h ${tm_file} elfos.h \
pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
pa/pa-hpux11.h"
case ${target} in
@@ -1807,55 +1807,55 @@ x86_64-*-darwin*)
tm_file="${cpu_type}/darwin64-biarch.h ${tm_file} "
;;
i[34567]86-*-elfiamcu)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/iamcu.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/iamcu.h"
;;
i[34567]86-*-elf*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h"
;;
x86_64-*-elf*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
;;
x86_64-*-rtems*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rtemself.h rtems.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rtemself.h rtems.h"
;;
i[34567]86-*-rdos*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/rdos.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/rdos.h"
;;
x86_64-*-rdos*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rdos.h i386/rdos64.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rdos.h i386/rdos64.h"
tmake_file="i386/t-i386elf t-svr4"
;;
i[34567]86-*-dragonfly*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h dragonfly.h dragonfly-stdint.h i386/dragonfly.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h dragonfly.h dragonfly-stdint.h i386/dragonfly.h"
tmake_file="${tmake_file} i386/t-crtstuff"
;;
x86_64-*-dragonfly*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h dragonfly.h dragonfly-stdint.h i386/x86-64.h i386/dragonfly.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h dragonfly.h dragonfly-stdint.h i386/x86-64.h i386/dragonfly.h"
tmake_file="${tmake_file} i386/t-crtstuff"
;;
i[34567]86-*-freebsd*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
;;
x86_64-*-freebsd*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
;;
i[34567]86-*-netbsdelf*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${nbsd_tm_file} i386/netbsd-elf.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h ${nbsd_tm_file} i386/netbsd-elf.h"
extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
;;
x86_64-*-netbsd*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${nbsd_tm_file} i386/x86-64.h i386/netbsd64.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h ${nbsd_tm_file} i386/x86-64.h i386/netbsd64.h"
extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
;;
i[34567]86-*-openbsd*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h"
tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
extra_options="${extra_options} openbsd.opt"
gas=yes
gnu_ld=yes
;;
x86_64-*-openbsd*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h"
tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/x86-64.h i386/openbsdelf.h"
extra_options="${extra_options} openbsd.opt"
gas=yes
@@ -1864,7 +1864,7 @@ x86_64-*-openbsd*)
i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
# Intel 80386's running GNU/*
# with ELF format using glibc 2
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h gnu-user.h glibc-stdint.h"
case ${target} in
i[34567]86-*-linux*)
tm_file="${tm_file} linux.h linux-android.h"
@@ -1921,7 +1921,7 @@ i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-gnu* | i[34567]8
esac
;;
x86_64-*-linux* | x86_64-*-kfreebsd*-gnu)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h \
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h gnu-user.h glibc-stdint.h \
i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h"
case ${target} in
x86_64-*-linux*)
@@ -1959,7 +1959,7 @@ x86_64-*-linux* | x86_64-*-kfreebsd*-gnu)
;;
i[34567]86-pc-msdosdjgpp*)
xm_file=i386/xm-djgpp.h
- tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h i386/djgpp-stdint.h"
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h i386/djgpp-stdint.h"
native_system_header_dir=/dev/env/DJDIR/include
extra_options="${extra_options} i386/djgpp.opt"
gnu_ld=yes
@@ -1968,7 +1968,7 @@ i[34567]86-pc-msdosdjgpp*)
;;
i[34567]86-*-lynxos*)
xm_defines=POSIX
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h i386/lynx.h lynx.h"
tmake_file="${tmake_file} t-lynx"
extra_options="${extra_options} lynx.opt"
thread_file=lynx
@@ -1976,13 +1976,13 @@ i[34567]86-*-lynxos*)
gas=yes
;;
i[34567]86-*-nto-qnx*)
- tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h"
+ tm_file="${tm_file} i386/att.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h"
extra_options="${extra_options} i386/nto.opt"
gnu_ld=yes
gas=yes
;;
i[34567]86-*-rtems*)
- tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
+ tm_file="${tm_file} i386/unix.h i386/att.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
tmake_file="${tmake_file} i386/t-rtems"
;;
i[34567]86-*-solaris2* | x86_64-*-solaris2*)
@@ -2031,7 +2031,7 @@ i[4567]86-wrs-vxworks*|x86_64-wrs-vxworks7*)
esac
;;
i[34567]86-*-cygwin*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
xm_file=i386/xm-cygwin.h
tmake_file="${tmake_file} i386/t-cygming t-slibgcc"
target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.cc"
@@ -2049,7 +2049,7 @@ i[34567]86-*-cygwin*)
;;
x86_64-*-cygwin*)
need_64bit_isa=yes
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-w64.h i386/cygwin-stdint.h"
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/cygming.h i386/cygwin.h i386/cygwin-w64.h i386/cygwin-stdint.h"
xm_file=i386/xm-cygwin.h
tmake_file="${tmake_file} i386/t-cygming t-slibgcc i386/t-cygwin-w64"
target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.cc"
@@ -2067,7 +2067,7 @@ x86_64-*-cygwin*)
tm_defines="${tm_defines} TARGET_CYGWIN64=1"
;;
i[34567]86-*-mingw* | x86_64-*-mingw*)
- tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h"
+ tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/cygming.h"
xm_file=i386/xm-mingw32.h
c_target_objs="${c_target_objs} winnt-c.o"
cxx_target_objs="${cxx_target_objs} winnt-c.o"
@@ -2161,7 +2161,7 @@ x86_64-*-fuchsia*)
tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h fuchsia.h"
;;
ia64*-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
+ tm_file="${tm_file} elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
tmake_file="ia64/t-ia64"
target_cpu_default="0"
if test x$gas = xyes
@@ -2174,17 +2174,17 @@ ia64*-*-elf*)
fi
;;
ia64*-*-freebsd*)
- tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
+ tm_file="${tm_file} elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
tmake_file="${tmake_file} ia64/t-ia64"
;;
ia64*-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
+ tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
tmake_file="${tmake_file} ia64/t-ia64 ia64/t-linux t-libunwind"
target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
;;
ia64*-*-hpux*)
- tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/hpux.h"
+ tm_file="${tm_file} elfos.h ia64/sysv4.h ia64/hpux.h"
tmake_file="ia64/t-ia64 ia64/t-hpux t-slibgcc"
target_cpu_default="MASK_GNU_AS"
case x$enable_threads in
@@ -2220,16 +2220,16 @@ iq2000*-*-elf*)
md_file=iq2000/iq2000.md
;;
lm32-*-elf*)
- tm_file="dbxelf.h elfos.h ${tm_file} newlib-stdint.h"
+ tm_file="elfos.h ${tm_file} newlib-stdint.h"
tmake_file="${tmake_file} lm32/t-lm32"
;;
lm32-*-rtems*)
- tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h"
+ tm_file="elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h"
tmake_file="${tmake_file} lm32/t-lm32"
tmake_file="${tmake_file} lm32/t-rtems"
;;
lm32-*-uclinux*)
- tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h"
+ tm_file="elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h"
tmake_file="${tmake_file} lm32/t-lm32"
;;
m32r-*-elf*)
@@ -2257,7 +2257,7 @@ m68k-*-elf* | fido-*-elf*)
default_cf_cpu=5206
;;
esac
- tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
+ tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
tm_defines="${tm_defines} MOTOROLA=1"
tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
# Add multilibs for targets other than fido.
@@ -2272,7 +2272,7 @@ m68k-*-elf* | fido-*-elf*)
m68k*-*-netbsdelf*)
default_m68k_cpu=68020
default_cf_cpu=5475
- tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file} m68k/netbsd-elf.h"
+ tm_file="${tm_file} elfos.h ${nbsd_tm_file} m68k/netbsd-elf.h"
extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
tm_defines="${tm_defines} MOTOROLA=1 CHAR_FAST8=1 SHORT_FAST16=1"
;;
@@ -2281,7 +2281,7 @@ m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
# ABI.
default_m68k_cpu=68020
default_cf_cpu=5206
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
+ tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
extra_options="${extra_options} m68k/uclinux.opt"
tm_defines="${tm_defines} MOTOROLA=1"
tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
@@ -2292,7 +2292,7 @@ m68k-*-linux*) # Motorola m68k's running GNU/Linux
default_m68k_cpu=68020
default_cf_cpu=5475
with_arch=${with_arch:-m68k}
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
+ tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
extra_options="${extra_options} m68k/ieee.opt"
tm_defines="${tm_defines} MOTOROLA=1"
tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
@@ -2301,11 +2301,11 @@ m68k-*-rtems*)
default_m68k_cpu=68020
default_cf_cpu=5206
tmake_file="${tmake_file} m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff m68k/t-rtems m68k/t-mlibs"
- tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
+ tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
tm_defines="${tm_defines} MOTOROLA=1"
;;
mcore-*-elf)
- tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
+ tm_file="elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
tmake_file=mcore/t-mcore
inhibit_libc=true
;;
@@ -2318,7 +2318,7 @@ microblaze*-linux*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
;;
esac
- tm_file="${tm_file} dbxelf.h gnu-user.h linux.h microblaze/linux.h"
+ tm_file="${tm_file} gnu-user.h linux.h microblaze/linux.h"
tm_file="${tm_file} glibc-stdint.h"
c_target_objs="${c_target_objs} microblaze-c.o"
cxx_target_objs="${cxx_target_objs} microblaze-c.o"
@@ -2334,7 +2334,7 @@ microblaze*-*-rtems*)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
;;
esac
- tm_file="${tm_file} dbxelf.h"
+ tm_file="${tm_file}"
tm_file="${tm_file} microblaze/rtems.h rtems.h newlib-stdint.h"
c_target_objs="${c_target_objs} microblaze-c.o"
cxx_target_objs="${cxx_target_objs} microblaze-c.o"
@@ -2350,7 +2350,7 @@ microblaze*-*-elf)
tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
;;
esac
- tm_file="${tm_file} dbxelf.h newlib-stdint.h"
+ tm_file="${tm_file} newlib-stdint.h"
c_target_objs="${c_target_objs} microblaze-c.o"
cxx_target_objs="${cxx_target_objs} microblaze-c.o"
tmake_file="${tmake_file} microblaze/t-microblaze"
@@ -2418,7 +2418,7 @@ riscv*-*-freebsd*)
;;
loongarch*-*-linux*)
- tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file}"
+ tm_file="elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file}"
tm_file="${tm_file} loongarch/gnu-user.h loongarch/linux.h"
extra_options="${extra_options} linux-android.opt"
tmake_file="${tmake_file} loongarch/t-linux"
@@ -2436,7 +2436,7 @@ mips*-*-netbsd*) # NetBSD/mips, either endian.
extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
;;
mips*-img-linux*)
- tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h"
+ tm_file="elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h"
extra_options="${extra_options} linux-android.opt"
tmake_file="${tmake_file} mips/t-img-linux"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6 MIPS_ABI_DEFAULT=ABI_32"
@@ -2446,7 +2446,7 @@ mips*-img-linux*)
gas=yes
;;
mips*-mti-linux*)
- tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h"
+ tm_file="elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h"
extra_options="${extra_options} linux-android.opt"
tmake_file="${tmake_file} mips/t-mti-linux"
tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2 MIPS_ABI_DEFAULT=ABI_32"
@@ -2456,7 +2456,7 @@ mips*-mti-linux*)
gas=yes
;;
mips*-*-linux*) # Linux MIPS, either endian.
- tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h"
+ tm_file="elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h"
extra_options="${extra_options} linux-android.opt"
case ${target} in
mipsisa32r6*)
@@ -2668,7 +2668,7 @@ mn10300-*-*)
use_gcc_stdint=wrap
;;
msp430-*-*)
- tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
+ tm_file="elfos.h newlib-stdint.h ${tm_file}"
c_target_objs="msp430-c.o"
cxx_target_objs="msp430-c.o"
tmake_file="${tmake_file} msp430/t-msp430"
@@ -2706,11 +2706,11 @@ nds32*-*-*)
esac
case ${target} in
nds32*-*-elf*)
- tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} nds32/elf.h nds32/nds32_intrinsic.h"
+ tm_file="elfos.h newlib-stdint.h ${tm_file} nds32/elf.h nds32/nds32_intrinsic.h"
tmake_file="nds32/t-nds32 nds32/t-elf"
;;
nds32*-*-linux*)
- tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h nds32/linux.h nds32/nds32_intrinsic.h"
+ tm_file="elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h nds32/linux.h nds32/nds32_intrinsic.h"
tmake_file="${tmake_file} nds32/t-nds32 nds32/t-linux"
gcc_cv_initfini_array=yes
;;
@@ -2831,7 +2831,7 @@ powerpc64-*-darwin*)
tm_file="${tm_file} ${cpu_type}/darwin64-biarch.h"
;;
powerpc*-*-freebsd*)
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h ${fbsd_tm_file} rs6000/sysv4.h"
+ tm_file="${tm_file} elfos.h gnu-user.h ${fbsd_tm_file} rs6000/sysv4.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
case ${target} in
@@ -2856,47 +2856,47 @@ powerpc*-*-freebsd*)
esac
;;
powerpc-*-netbsd*)
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h ${nbsd_tm_file} freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
+ tm_file="${tm_file} elfos.h gnu-user.h ${nbsd_tm_file} freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
tmake_file="${tmake_file} rs6000/t-netbsd"
extra_options="${extra_options} rs6000/sysv4.opt"
;;
powerpc-*-eabisimaltivec*)
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
+ tm_file="${tm_file} elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
use_gcc_stdint=wrap
;;
powerpc-*-eabisim*)
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
+ tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
use_gcc_stdint=wrap
;;
powerpc-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
+ tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
;;
powerpc-*-eabialtivec*)
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
+ tm_file="${tm_file} elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
use_gcc_stdint=wrap
;;
powerpc-*-eabi*)
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h"
+ tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
use_gcc_stdint=wrap
;;
powerpc-*-rtems*)
- tm_file="rs6000/biarch64.h ${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/rtems.h rtems.h"
+ tm_file="rs6000/biarch64.h ${tm_file} elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/rtems.h rtems.h"
extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-rtems rs6000/t-ppccomm"
;;
powerpc*-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h freebsd-spec.h rs6000/sysv4.h"
+ tm_file="${tm_file} elfos.h gnu-user.h linux.h freebsd-spec.h rs6000/sysv4.h"
extra_options="${extra_options} rs6000/sysv4.opt"
tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm"
extra_objs="$extra_objs rs6000-linux.o"
@@ -3003,7 +3003,7 @@ powerpc-wrs-vxworks*)
;;
powerpc-*-lynxos*)
xm_defines=POSIX
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
+ tm_file="${tm_file} elfos.h gnu-user.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
tmake_file="t-lynx rs6000/t-lynx"
extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
thread_file=lynx
@@ -3011,18 +3011,18 @@ powerpc-*-lynxos*)
gas=yes
;;
powerpcle-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
+ tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
extra_options="${extra_options} rs6000/sysv4.opt"
;;
powerpcle-*-eabisim*)
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
+ tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
extra_options="${extra_options} rs6000/sysv4.opt"
use_gcc_stdint=wrap
;;
powerpcle-*-eabi*)
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
+ tm_file="${tm_file} elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
extra_options="${extra_options} rs6000/sysv4.opt"
use_gcc_stdint=wrap
@@ -3080,7 +3080,7 @@ rl78-*-elf*)
tmake_file="${tmake_file} rl78/t-rl78"
;;
rx-*-elf*)
- tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
+ tm_file="elfos.h newlib-stdint.h ${tm_file}"
tmake_file="${tmake_file} rx/t-rx"
extra_options="${extra_options} rx/elf.opt"
;;
@@ -3089,7 +3089,7 @@ rx-*-linux*)
tmake_file="${tmake_file} rx/t-linux"
;;
s390-*-linux*)
- tm_file="s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
+ tm_file="s390/s390.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
c_target_objs="${c_target_objs} s390-c.o"
cxx_target_objs="${cxx_target_objs} s390-c.o"
if test x$enable_targets = xall; then
@@ -3098,7 +3098,7 @@ s390-*-linux*)
tmake_file="${tmake_file} s390/t-s390"
;;
s390x-*-linux*)
- tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
+ tm_file="s390/s390x.h s390/s390.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
tm_p_file="linux-protos.h s390/s390-protos.h"
c_target_objs="${c_target_objs} s390-c.o"
cxx_target_objs="${cxx_target_objs} s390-c.o"
@@ -3108,7 +3108,7 @@ s390x-*-linux*)
tmake_file="${tmake_file} s390/t-linux64 s390/t-s390"
;;
s390x-ibm-tpf*)
- tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h glibc-stdint.h s390/tpf.h"
+ tm_file="s390/s390x.h s390/s390.h elfos.h glibc-stdint.h s390/tpf.h"
tm_p_file=s390/s390-protos.h
c_target_objs="${c_target_objs} s390-c.o"
cxx_target_objs="${cxx_target_objs} s390-c.o"
@@ -3147,7 +3147,7 @@ sh-*-elf* | sh[12346l]*-*-elf* | \
case ${with_endian} in
little*) tm_file="sh/little.h ${tm_file}" ;;
esac
- tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h"
+ tm_file="${tm_file} elfos.h sh/elf.h"
case ${target} in
sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
if test x$enable_fdpic = xyes; then
@@ -3268,14 +3268,14 @@ sh-*-elf* | sh[12346l]*-*-elf* | \
;;
sh-*-rtems*)
tmake_file="${tmake_file} sh/t-sh sh/t-rtems"
- tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
+ tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
;;
sh-wrs-vxworks)
tmake_file="$tmake_file sh/t-sh sh/t-vxworks"
tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
;;
sparc-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h"
+ tm_file="${tm_file} elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h"
case ${target} in
*-leon-*)
tmake_file="sparc/t-sparc sparc/t-leon"
@@ -3289,11 +3289,11 @@ sparc-*-elf*)
esac
;;
sparc-*-rtems*)
- tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
+ tm_file="${tm_file} elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
tmake_file="${tmake_file} sparc/t-sparc sparc/t-rtems"
;;
sparc-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/tso.h"
+ tm_file="${tm_file} elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/tso.h"
extra_options="${extra_options} sparc/long-double-switch.opt"
case ${target} in
*-leon-*)
@@ -3315,7 +3315,7 @@ sparc-*-linux*)
fi
;;
sparc-*-netbsdelf*)
- tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h"
+ tm_file="${tm_file} elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h"
extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
extra_options="${extra_options} sparc/long-double-switch.opt"
tmake_file="${tmake_file} sparc/t-sparc"
@@ -3337,22 +3337,22 @@ sparc-wrs-vxworks)
tmake_file="${tmake_file} sparc/t-sparc sparc/t-vxworks"
;;
sparc64-*-elf*)
- tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
+ tm_file="${tm_file} elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
extra_options="${extra_options}"
tmake_file="${tmake_file} sparc/t-sparc"
;;
sparc64-*-rtems*)
- tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
+ tm_file="${tm_file} elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
extra_options="${extra_options}"
tmake_file="${tmake_file} sparc/t-sparc sparc/t-rtems-64"
;;
sparc64-*-linux*)
- tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/default64.h sparc/linux64.h sparc/tso.h"
+ tm_file="sparc/biarch64.h ${tm_file} elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/default64.h sparc/linux64.h sparc/tso.h"
extra_options="${extra_options} sparc/long-double-switch.opt"
tmake_file="${tmake_file} sparc/t-sparc sparc/t-linux64"
;;
sparc64-*-freebsd*|ultrasparc-*-freebsd*)
- tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
+ tm_file="${tm_file} ${fbsd_tm_file} elfos.h sparc/sysv4.h sparc/freebsd.h"
extra_options="${extra_options} sparc/long-double-switch.opt"
case "x$with_cpu" in
xultrasparc) ;;
@@ -3363,13 +3363,13 @@ sparc64-*-freebsd*|ultrasparc-*-freebsd*)
;;
sparc64-*-netbsd*)
tm_file="sparc/biarch64.h ${tm_file}"
- tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h"
+ tm_file="${tm_file} elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h"
extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
extra_options="${extra_options} sparc/long-double-switch.opt"
tmake_file="${tmake_file} sparc/t-sparc sparc/t-netbsd64"
;;
sparc64-*-openbsd*)
- tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp64-elf.h"
+ tm_file="sparc/openbsd1-64.h ${tm_file} elfos.h sparc/sysv4.h sparc/sp64-elf.h"
tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
extra_options="${extra_options} openbsd.opt"
extra_options="${extra_options}"
@@ -3379,13 +3379,13 @@ sparc64-*-openbsd*)
;;
tic6x-*-elf)
tm_file="elfos.h ${tm_file} c6x/elf-common.h c6x/elf.h"
- tm_file="${tm_file} dbxelf.h tm-dwarf2.h newlib-stdint.h"
+ tm_file="${tm_file} tm-dwarf2.h newlib-stdint.h"
tmake_file="c6x/t-c6x c6x/t-c6x-elf"
use_collect2=no
;;
tic6x-*-uclinux)
tm_file="elfos.h ${tm_file} gnu-user.h linux.h c6x/elf-common.h c6x/uclinux-elf.h"
- tm_file="${tm_file} dbxelf.h tm-dwarf2.h glibc-stdint.h"
+ tm_file="${tm_file} tm-dwarf2.h glibc-stdint.h"
tm_file="${tm_file} ./sysroot-suffix.h"
tmake_file="t-sysroot-suffix t-slibgcc"
tmake_file="${tmake_file} c6x/t-c6x c6x/t-c6x-elf c6x/t-c6x-uclinux"
@@ -3429,7 +3429,7 @@ v850*-*-*)
use_gcc_stdint=wrap
;;
vax-*-linux*)
- tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h"
+ tm_file="${tm_file} elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h"
extra_options="${extra_options} vax/elf.opt"
;;
vax-*-netbsdelf*)
@@ -3438,12 +3438,12 @@ vax-*-netbsdelf*)
tm_defines="${tm_defines} CHAR_FAST8=1 SHORT_FAST16=1"
;;
visium-*-elf*)
- tm_file="dbxelf.h elfos.h ${tm_file} visium/elf.h newlib-stdint.h"
+ tm_file="elfos.h ${tm_file} visium/elf.h newlib-stdint.h"
tmake_file="visium/t-visium visium/t-crtstuff"
;;
xstormy16-*-elf)
# For historical reasons, the target files omit the 'x'.
- tm_file="dbxelf.h elfos.h newlib-stdint.h stormy16/stormy16.h"
+ tm_file="elfos.h newlib-stdint.h stormy16/stormy16.h"
tm_p_file=stormy16/stormy16-protos.h
tm_d_file="elfos.h stormy16/stormy16.h"
md_file=stormy16/stormy16.md
@@ -452,12 +452,6 @@
#endif
-/* Define if your assembler supports the --gstabs option. */
-#ifndef USED_FOR_TARGET
-#undef HAVE_AS_GSTABS_DEBUG_FLAG
-#endif
-
-
/* Define if your assembler supports the Sun syntax for cmov. */
#ifndef USED_FOR_TARGET
#undef HAVE_AS_IX86_CMOV_SUN_SYNTAX
@@ -746,12 +740,6 @@
#endif
-/* Define if your assembler supports .stabs. */
-#ifndef USED_FOR_TARGET
-#undef HAVE_AS_STABS_DIRECTIVE
-#endif
-
-
/* Define if your assembler and linker support thread-local storage. */
#ifndef USED_FOR_TARGET
#undef HAVE_AS_TLS
@@ -2111,13 +2099,6 @@
#endif
-/* Define if your assembler supports AIX debug frame section label reference.
- */
-#ifndef USED_FOR_TARGET
-#undef HAVE_XCOFF_DWARF_EXTRAS
-#endif
-
-
/* Define if you have a working <zstd.h> header file. */
#ifndef USED_FOR_TARGET
#undef HAVE_ZSTD_H
@@ -144,7 +144,4 @@ ASM_MABI_SPEC
#undef TYPE_OPERAND_FMT
#define TYPE_OPERAND_FMT "%%%s"
-/* Stabs debug not required. */
-#undef DBX_DEBUGGING_INFO
-
#endif /* GCC_AARCH64_ELF_H */
@@ -8458,10 +8458,6 @@ alpha_output_mi_thunk_osf (FILE *file, tree thunk_fndecl ATTRIBUTE_UNUSED,
}
#endif /* TARGET_ABI_OSF */
-/* Debugging support. */
-
-#include "gstab.h"
-
/* Name of the file containing the current function. */
static const char *current_function_file = "";
@@ -22,7 +22,7 @@ along with GCC; see the file COPYING3. If not see
#define CC1_SPEC "%{G*}"
#undef ASM_SPEC
-#define ASM_SPEC "%{G*} %{relax:-relax} %{!gstabs*:-no-mdebug}%{gstabs*:-mdebug} %{mcpu=*:-m%*}"
+#define ASM_SPEC "%{G*} %{relax:-relax} %{mcpu=*:-m%*}"
/* Do not output a .file directive at the beginning of the input file. */
@@ -1330,12 +1330,7 @@ do { \
/* Debugging information. */
-/* Generate DBX and DWARF debugging information. */
-#ifdef DBX_DEBUGGING_INFO
-#undef DBX_DEBUGGING_INFO
-#endif
-#define DBX_DEBUGGING_INFO
-
+/* Generate DWARF debugging information. */
#ifdef DWARF2_DEBUGGING_INFO
#undef DWARF2_DEBUGGING_INFO
#endif
@@ -1385,9 +1380,6 @@ do { \
#define EH_RETURN_STACKADJ_RTX gen_rtx_REG (Pmode, 2)
-/* Turn off splitting of long stabs. */
-#define DBX_CONTIN_LENGTH 0
-
/* Miscellaneous. */
/* Specify the machine mode that this machine uses
@@ -145,15 +145,6 @@
#define NO_DOLLAR_IN_LABEL 1
#endif
-/* Generate DBX debugging information. riscix.h will undefine this because
- the native assembler does not support stabs. */
-#define DBX_DEBUGGING_INFO 1
-
-/* Acorn dbx moans about continuation chars, so don't use any. */
-#ifndef DBX_CONTIN_LENGTH
-#define DBX_CONTIN_LENGTH 0
-#endif
-
/* Output a function label definition. */
#ifndef ASM_DECLARE_FUNCTION_NAME
#define ASM_DECLARE_FUNCTION_NAME(STREAM, NAME, DECL) \
@@ -85,9 +85,6 @@
#undef PTRDIFF_TYPE
#define PTRDIFF_TYPE "long int"
-/* We don't have any limit on the length as out debugger is GDB. */
-#undef DBX_CONTIN_LENGTH
-
/* NetBSD does its profiling differently to the Acorn compiler. We
don't need a word following the mcount call; and to skip it
requires either an assembly stub or use of fomit-frame-pointer when
@@ -396,10 +396,10 @@ extern GTY(()) int darwin_ms_struct;
#define DSYMUTIL_SPEC \
"%{!c:%{!E:%{!S:%{!r:%{!M:%{!MM:%{!fsyntax-only:%{!fdump=*:\
- %{g*:%{!gctf:%{!gbtf:%{!gstabs*:%{%:debug-level-gt(0): -idsym \
+ %{g*:%{!gctf:%{!gbtf:%{%:debug-level-gt(0): -idsym \
%{.c|.cc|.C|.cpp|.cp|.c++|.cxx|.CPP|.m|.mm|.s|.f|.f90|\
.f95|.f03|.f77|.for|.F|.F90|.F95|.F03|.d: -dsym }\
- }}}}}\
+ }}}}\
}}}}}}}}"
#define LINK_COMMAND_SPEC LINK_COMMAND_SPEC_A DSYMUTIL_SPEC
@@ -583,14 +583,7 @@ extern GTY(()) int darwin_ms_struct;
"%{static} -arch %(darwin_arch) " \
ASM_OPTIONS ASM_MMACOSX_VERSION_MIN_SPEC
-#ifdef HAVE_AS_STABS_DIRECTIVE
-/* We only pass a debug option to the assembler if that supports stabs, since
- dwarf is not uniformly supported in the assemblers. */
-#define ASM_DEBUG_SPEC "%{g*:%{%:debug-level-gt(0):%{!gdwarf*:--gstabs}}}"
-#else
#define ASM_DEBUG_SPEC ""
-#endif
-
#undef ASM_DEBUG_OPTION_SPEC
#define ASM_DEBUG_OPTION_SPEC ""
@@ -604,10 +597,6 @@ ASM_OPTIONS ASM_MMACOSX_VERSION_MIN_SPEC
#define DWARF2_DEBUGGING_INFO 1
#define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
-#ifdef HAVE_AS_STABS_DIRECTIVE
-#define DBX_DEBUGGING_INFO 1
-#endif
-
#define DEBUG_FRAME_SECTION "__DWARF,__debug_frame,regular,debug"
#define DEBUG_INFO_SECTION "__DWARF,__debug_info,regular,debug"
#define DEBUG_ABBREV_SECTION "__DWARF,__debug_abbrev,regular,debug"
@@ -639,18 +628,6 @@ ASM_OPTIONS ASM_MMACOSX_VERSION_MIN_SPEC
? "__DWARF,__debug_gnu_pubt,regular,debug" \
: "__DWARF,__debug_pubtypes,regular,debug")
-/* When generating stabs debugging, use N_BINCL entries. */
-
-#define DBX_USE_BINCL
-
-/* There is no limit to the length of stabs strings. */
-
-#define DBX_CONTIN_LENGTH 0
-
-/* gdb needs a null N_SO at the end of each file for scattered loading. */
-
-#define DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
-
/* GCC's definition of 'one_only' is the same as its definition of 'weak'. */
#define MAKE_DECL_ONE_ONLY(DECL) (DECL_WEAK (DECL) = 1)
deleted file mode 100644
@@ -1,56 +0,0 @@
-/* Definitions needed when using stabs embedded in COFF sections.
- Copyright (C) 1996-2022 Free Software Foundation, Inc.
-
-This file is part of GCC.
-
-GCC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 3, or (at your option)
-any later version.
-
-GCC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING3. If not see
-<http://www.gnu.org/licenses/>. */
-
-/* This file may be included by any COFF target which wishes to
- support -gstabs generating stabs in sections, as produced by gas
- and understood by gdb. */
-
-/* Output DBX (stabs) debugging information if doing -gstabs. */
-
-#define DBX_DEBUGGING_INFO 1
-
-/* Be function-relative for block and source line stab directives. */
-
-#define DBX_BLOCKS_FUNCTION_RELATIVE 1
-
-/* but, to make this work, functions must appear prior to line info. */
-
-#define DBX_FUNCTION_FIRST
-
-/* Generate a blank trailing N_SO to mark the end of the .o file, since
- we can't depend upon the linker to mark .o file boundaries with
- embedded stabs. */
-
-#define DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
-
-/* Like block addresses, stabs line numbers are relative to the
- current function. */
-
-#define DBX_LINES_FUNCTION_RELATIVE 1
-
-/* When generating stabs debugging, use N_BINCL entries. */
-
-#undef DBX_USE_BINCL
-#define DBX_USE_BINCL
-
-/* There is no limit to the length of stabs strings. */
-
-#ifndef DBX_CONTIN_LENGTH
-#define DBX_CONTIN_LENGTH 0
-#endif
deleted file mode 100644
@@ -1,68 +0,0 @@
-/* Definitions needed when using stabs embedded in ELF sections.
- Copyright (C) 1999-2022 Free Software Foundation, Inc.
-
-This file is part of GCC.
-
-GCC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 3, or (at your option)
-any later version.
-
-GCC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-Under Section 7 of GPL version 3, you are granted additional
-permissions described in the GCC Runtime Library Exception, version
-3.1, as published by the Free Software Foundation.
-
-You should have received a copy of the GNU General Public License and
-a copy of the GCC Runtime Library Exception along with this program;
-see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
-<http://www.gnu.org/licenses/>. */
-
-/* This file may be included by any ELF target which wishes to
- support -gstabs generating stabs in sections, as produced by gas
- and understood by gdb. */
-
-#ifndef GCC_DBX_ELF_H
-#define GCC_DBX_ELF_H
-
-/* Output DBX (stabs) debugging information if doing -gstabs. */
-
-#define DBX_DEBUGGING_INFO 1
-
-/* Make LBRAC and RBRAC addresses relative to the start of the
- function. The native Solaris stabs debugging format works this
- way, gdb expects it, and it reduces the number of relocation
- entries... */
-
-#define DBX_BLOCKS_FUNCTION_RELATIVE 1
-
-/* ... but, to make this work, functions must appear prior to line info. */
-
-#define DBX_FUNCTION_FIRST
-
-/* When generating stabs debugging, use N_BINCL entries. */
-
-#define DBX_USE_BINCL
-
-/* There is no limit to the length of stabs strings. */
-
-#ifndef DBX_CONTIN_LENGTH
-#define DBX_CONTIN_LENGTH 0
-#endif
-
-/* Like block addresses, stabs line numbers are relative to the
- current function. */
-
-#define DBX_LINES_FUNCTION_RELATIVE 1
-
-/* Generate a blank trailing N_SO to mark the end of the .o file, since
- we can't depend upon the linker to mark .o file boundaries with
- embedded stabs. */
-
-#define DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
-
-#endif /* ! GCC_DBX_ELF_H */
@@ -795,14 +795,9 @@ do \
/* Debugging information. */
-/* Generate DBX and DWARF debugging information. */
-#define DBX_DEBUGGING_INFO 1
-
+/* Generate DWARF debugging information. */
#undef PREFERRED_DEBUGGING_TYPE
#define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
-
-/* Turn off splitting of long stabs. */
-#define DBX_CONTIN_LENGTH 0
/* Miscellaneous. */
@@ -91,9 +91,3 @@ along with GCC; see the file COPYING3. If not see
/* The prefix to add to user-visible assembler symbols. */
#define USER_LABEL_PREFIX "_"
-
-/* Sequent has some changes in the format of DBX symbols. */
-#define DBX_NO_XREFS 1
-
-/* Don't split DBX symbols into continuations. */
-#define DBX_CONTIN_LENGTH 0
@@ -36,10 +36,6 @@ along with GCC; see the file COPYING3. If not see
* people who want both form will have to compile twice.
*/
-/* these come from i386/bsd.h, but are specific to sequent */
-#undef DBX_NO_XREFS
-#undef DBX_CONTIN_LENGTH
-
/* Output #ident as a .ident. */
#undef TARGET_ASM_OUTPUT_IDENT
@@ -1426,8 +1426,6 @@ do { \
/* Specific Options for DBX Output. */
-/* This is handled by dbxelf.h. */
-
/* Open ended Hooks for DBX Output. */
@@ -30,9 +30,6 @@ see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
#undef PREFERRED_DEBUGGING_TYPE
#define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
-/* Stabs does not work properly for 64-bit targets. */
-#undef DBX_DEBUGGING_INFO
-
/* Various pseudo-ops for which the Intel assembler uses non-standard
definitions. */
@@ -146,10 +146,6 @@ along with GCC; see the file COPYING3. If not see
fprintf (FILE, "\tjbsr _mcount\n"); \
}
-/* Do not break .stabs pseudos into continuations. */
-
-#define DBX_CONTIN_LENGTH 0
-
/* 1 if N is a possible register number for a function value. For
m68k/SVR4 allow d0, a0, or fp0 as return registers, for integral,
pointer, or floating types, respectively. Reject fp0 if not using
@@ -60,18 +60,6 @@ along with GCC; see the file COPYING3. If not see
/* Every structure or union's size must be a multiple of 2 bytes. */
#define STRUCTURE_SIZE_BOUNDARY 16
-/* Specific options for DBX Output. */
-
-/* This is BSD, so it wants DBX format. */
-#define DBX_DEBUGGING_INFO 1
-
-/* Do not break .stabs pseudos into continuations. */
-#define DBX_CONTIN_LENGTH 0
-
-/* This is the char to use for continuation (in case we need to turn
- continuation back on). */
-#define DBX_CONTIN_CHAR '?'
-
/* Stack & calling: aggregate returns. */
/* ??? This is traditional, but quite possibly wrong. It appears to
@@ -445,7 +445,6 @@ int num_source_filenames;
const char *current_function_file = "";
/* Arrays that map GCC register numbers to debugger register numbers. */
-int mips_dbx_regno[FIRST_PSEUDO_REGISTER];
int mips_dwarf_regno[FIRST_PSEUDO_REGISTER];
/* Information about the current function's epilogue, used only while
@@ -9595,10 +9594,6 @@ mips_output_filename (FILE *stream, const char *name)
output_quoted_string (stream, name);
putc ('\n', stream);
}
- /* If we are emitting stabs, let dbxout.cc handle this (except for
- the mips_output_filename_first_time case). */
- else if (write_symbols == DBX_DEBUG)
- return;
else if (name != current_function_file
&& strcmp (name, current_function_file) != 0)
{
@@ -20505,24 +20500,13 @@ mips_option_override (void)
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
{
- mips_dbx_regno[i] = IGNORED_DWARF_REGNUM;
if (GP_REG_P (i) || FP_REG_P (i) || ALL_COP_REG_P (i))
mips_dwarf_regno[i] = i;
else
mips_dwarf_regno[i] = INVALID_REGNUM;
}
- start = GP_DBX_FIRST - GP_REG_FIRST;
- for (i = GP_REG_FIRST; i <= GP_REG_LAST; i++)
- mips_dbx_regno[i] = i + start;
-
- start = FP_DBX_FIRST - FP_REG_FIRST;
- for (i = FP_REG_FIRST; i <= FP_REG_LAST; i++)
- mips_dbx_regno[i] = i + start;
-
/* Accumulator debug registers use big-endian ordering. */
- mips_dbx_regno[HI_REGNUM] = MD_DBX_FIRST + 0;
- mips_dbx_regno[LO_REGNUM] = MD_DBX_FIRST + 1;
mips_dwarf_regno[HI_REGNUM] = MD_REG_FIRST + 0;
mips_dwarf_regno[LO_REGNUM] = MD_REG_FIRST + 1;
for (i = DSP_ACC_REG_FIRST; i <= DSP_ACC_REG_LAST; i += 2)
@@ -1384,9 +1384,7 @@ struct mips_cpu_info {
#ifndef SUBTARGET_ASM_DEBUGGING_SPEC
#define SUBTARGET_ASM_DEBUGGING_SPEC "\
%{g} %{g0} %{g1} %{g2} %{g3} \
-%{ggdb:-g} %{ggdb0:-g0} %{ggdb1:-g1} %{ggdb2:-g2} %{ggdb3:-g3} \
-%{gstabs:-g} %{gstabs0:-g0} %{gstabs1:-g1} %{gstabs2:-g2} %{gstabs3:-g3} \
-%{gstabs+:-g} %{gstabs+0:-g0} %{gstabs+1:-g1} %{gstabs+2:-g2} %{gstabs+3:-g3}"
+%{ggdb:-g} %{ggdb0:-g0} %{ggdb1:-g1} %{ggdb2:-g2} %{ggdb3:-g3}"
#endif
/* FP_ASM_SPEC represents the floating-point options that must be passed
@@ -1508,7 +1506,6 @@ FP_ASM_SPEC "\
#define SUBTARGET_EXTRA_SPECS
#endif
-#define DBX_DEBUGGING_INFO 1 /* generate stabs (OSF/rose) */
#define DWARF2_DEBUGGING_INFO 1 /* dwarf2 debugging info */
#ifndef PREFERRED_DEBUGGING_TYPE
@@ -1548,14 +1545,6 @@ FP_ASM_SPEC "\
#define USER_LABEL_PREFIX ""
#endif
-/* On Sun 4, this limit is 2048. We use 1500 to be safe,
- since the length can run past this up to a continuation point. */
-#undef DBX_CONTIN_LENGTH
-#define DBX_CONTIN_LENGTH 1500
-
-/* How to renumber registers for dbx and gdb. */
-#define DBX_REGISTER_NUMBER(REGNO) mips_dbx_regno[REGNO]
-
/* The mapping from gcc register number to DWARF 2 CFA column number. */
#define DWARF_FRAME_REGNUM(REGNO) mips_dwarf_regno[REGNO]
@@ -1869,7 +1858,6 @@ FP_ASM_SPEC "\
#define GP_REG_FIRST 0
#define GP_REG_LAST 31
#define GP_REG_NUM (GP_REG_LAST - GP_REG_FIRST + 1)
-#define GP_DBX_FIRST 0
#define K0_REG_NUM (GP_REG_FIRST + 26)
#define K1_REG_NUM (GP_REG_FIRST + 27)
#define KERNEL_REG_P(REGNO) (IN_RANGE (REGNO, K0_REG_NUM, K1_REG_NUM))
@@ -1877,12 +1865,10 @@ FP_ASM_SPEC "\
#define FP_REG_FIRST 32
#define FP_REG_LAST 63
#define FP_REG_NUM (FP_REG_LAST - FP_REG_FIRST + 1)
-#define FP_DBX_FIRST ((write_symbols == DBX_DEBUG) ? 38 : 32)
#define MD_REG_FIRST 64
#define MD_REG_LAST 65
#define MD_REG_NUM (MD_REG_LAST - MD_REG_FIRST + 1)
-#define MD_DBX_FIRST (FP_DBX_FIRST + FP_REG_NUM)
#define MSA_REG_FIRST FP_REG_FIRST
#define MSA_REG_LAST FP_REG_LAST
@@ -3221,7 +3207,6 @@ extern int num_source_filenames; /* current .file # */
extern struct mips_asm_switch mips_noreorder;
extern struct mips_asm_switch mips_nomacro;
extern struct mips_asm_switch mips_noat;
-extern int mips_dbx_regno[];
extern int mips_dwarf_regno[];
extern bool mips_split_p[];
extern bool mips_split_hi_p[];
@@ -52,7 +52,6 @@
#include "tm-preds.h"
#include "tm-constrs.h"
#include "langhooks.h"
-#include "dbxout.h"
#include "cfgrtl.h"
#include "gimple.h"
#include "stor-layout.h"
@@ -150,17 +150,6 @@ while (0)
#undef TARGET_LIBC_HAS_FUNCTION
#define TARGET_LIBC_HAS_FUNCTION default_libc_has_function
-
-/* Runtime target specification. */
-
-/* Miscellaneous parameters. */
-
-/* Controlling debugging info: dbx options. */
-
-/* Don't use the `xsTAG;' construct in DBX output; OpenBSD systems that
- use DBX don't support it. */
-#define DBX_NO_XREFS
-
/* - we use . - _func instead of a local label,
- we put extra spaces in expressions such as
@@ -65,10 +65,6 @@ along with GCC; see the file COPYING3. If not see
#undef LONG_DOUBLE_TYPE_SIZE
#define LONG_DOUBLE_TYPE_SIZE 128
-/* Temporary until we figure out what to do with those *(&@$ 32bit
- relocs which appear in stabs. */
-#undef DBX_DEBUGGING_INFO
-
/* ?!? This needs to be made compile-time selectable.
The PA64 runtime model has arguments that grow to higher addresses
@@ -130,8 +130,6 @@ extern unsigned long total_code_bytes;
and the old mnemonics are dialect zero. */
#define ASSEMBLER_DIALECT (TARGET_PA_20 ? 1 : 0)
-/* Override some settings from dbxelf.h. */
-
/* We do not have to be compatible with dbx, so we enable gdb extensions
by default. */
#define DEFAULT_GDB_EXTENSIONS 1
@@ -139,14 +137,6 @@ extern unsigned long total_code_bytes;
/* Select dwarf2 as the preferred debug format. */
#define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
-/* This used to be zero (no max length), but big enums and such can
- cause huge strings which killed gas.
-
- We also have to avoid lossage in dbxout.cc -- it does not compute the
- string size accurately, so we are real conservative here. */
-#undef DBX_CONTIN_LENGTH
-#define DBX_CONTIN_LENGTH 3000
-
/* GDB always assumes the current function's frame begins at the value
of the stack pointer upon entry to the current function. Accessing
local variables and parameters passed on the stack is done using the
@@ -21,21 +21,6 @@ along with GCC; see the file COPYING3. If not see
#undef TARGET_SOM
#define TARGET_SOM 1
-/* With SOM we can only do STABS. */
-#undef PREFERRED_DEBUGGING_TYPE
-#define PREFERRED_DEBUGGING_TYPE DBX_DEBUG
-
-/* We do not use BINCL stabs in SOM.
- ??? If it does not hurt, we probably should to avoid useless divergence
- from other embedded stabs implementations. */
-#undef DBX_USE_BINCL
-
-#define DBX_LINES_FUNCTION_RELATIVE 1
-
-/* gdb needs a null N_SO at the end of each file for scattered loading. */
-
-#define DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
-
/* HPUX has a program 'chatr' to list the dependencies of dynamically
linked executables and shared libraries. */
#define LDD_SUFFIX "chatr"
@@ -44,7 +44,6 @@ along with GCC; see the file COPYING3. If not see
#include "calls.h"
#include "expr.h"
#include "builtins.h"
-#include "dbxout.h"
#include "explow.h"
#include "expmed.h"
@@ -51,12 +51,6 @@ along with GCC; see the file COPYING3. If not see
/* Generate DBX debugging information. */
-
-#define DBX_DEBUGGING_INFO
-
-#undef PREFERRED_DEBUGGING_TYPE
-#define PREFERRED_DEBUGGING_TYPE DBX_DEBUG
-
#define TARGET_40_PLUS (TARGET_40 || TARGET_45)
#define TARGET_10 (! TARGET_40_PLUS)
@@ -489,9 +483,6 @@ extern int current_first_parm_offset;
/* Nonzero if access to memory by byte is no faster than by word. */
#define SLOW_BYTE_ACCESS 1
-/* Do not break .stabs pseudos into continuations. */
-#define DBX_CONTIN_LENGTH 0
-
/* Give a comparison code (EQ, NE etc) and the first operand of a COMPARE,
return the mode to be used for the comparison. */
@@ -51,9 +51,6 @@
#include "tree-ssa-propagate.h"
#include "builtins.h"
#include "tree-vector-builder.h"
-#if TARGET_XCOFF
-#include "xcoffout.h" /* get declarations of xcoff_*_section_name */
-#endif
#include "ppc-auxv.h"
#include "rs6000-internal.h"
@@ -61,20 +61,12 @@
#include "tree-ssa-propagate.h"
#include "builtins.h"
#include "tree-vector-builder.h"
-#if TARGET_XCOFF
-#include "xcoffout.h" /* get declarations of xcoff_*_section_name */
-#endif
#include "ppc-auxv.h"
#include "targhooks.h"
#include "opts.h"
#include "rs6000-internal.h"
-#if TARGET_MACHO
-#include "gstab.h" /* for N_SLINE */
-#include "dbxout.h" /* dbxout_ */
-#endif
-
#ifndef TARGET_PROFILE_KERNEL
#define TARGET_PROFILE_KERNEL 0
#endif
@@ -47,10 +47,6 @@
#include "diagnostic-core.h"
#include "alias.h"
#include "rs6000-internal.h"
-#if TARGET_MACHO
-#include "gstab.h" /* for N_SLINE */
-#include "dbxout.h" /* dbxout_ */
-#endif
static int rs6000_ra_ever_killed (void);
static void is_altivec_return_reg (rtx, void *);
@@ -5144,10 +5140,6 @@ macho_branch_islands (void)
}
strcpy (tmp_buf, "\n");
strcat (tmp_buf, label);
-#if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)
- if (write_symbols == DBX_DEBUG || write_symbols == XCOFF_DEBUG)
- dbxout_stabd (N_SLINE, bi->line_number);
-#endif /* DBX_DEBUGGING_INFO || XCOFF_DEBUGGING_INFO */
if (flag_pic)
{
strcat (tmp_buf, ":\n\tmflr r0\n\tbcl 20,31,");
@@ -5181,10 +5173,6 @@ macho_branch_islands (void)
strcat (tmp_buf, ")\n\tmtctr r12\n\tbctr");
}
output_asm_insn (tmp_buf, 0);
-#if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)
- if (write_symbols == DBX_DEBUG || write_symbols == XCOFF_DEBUG)
- dbxout_stabd (N_SLINE, bi->line_number);
-#endif /* DBX_DEBUGGING_INFO || XCOFF_DEBUGGING_INFO */
branch_islands->pop ();
}
}
@@ -75,9 +75,6 @@
#include "ipa-prop.h"
#include "ipa-fnsummary.h"
#include "except.h"
-#if TARGET_XCOFF
-#include "xcoffout.h" /* get declarations of xcoff_*_section_name */
-#endif
#include "case-cfn-macros.h"
#include "ppc-auxv.h"
#include "rs6000-internal.h"
@@ -3824,12 +3821,6 @@ rs6000_option_override_internal (bool global_init_p)
if (TARGET_DEBUG_REG || TARGET_DEBUG_TARGET)
rs6000_print_isa_options (stderr, 0, "before defaults", rs6000_isa_flags);
-#ifdef XCOFF_DEBUGGING_INFO
- /* For AIX default to 64-bit DWARF. */
- if (!OPTION_SET_P (dwarf_offset_size))
- dwarf_offset_size = POINTER_SIZE_UNITS;
-#endif
-
/* Handle explicit -mno-{altivec,vsx,power8-vector,power9-vector} and turn
off all of the options that depend on those flags. */
ignore_masks = rs6000_disable_incompatible_switches ();
@@ -20949,9 +20940,14 @@ rs6000_elf_file_end (void)
#if TARGET_XCOFF
-#ifndef HAVE_XCOFF_DWARF_EXTRAS
-#define HAVE_XCOFF_DWARF_EXTRAS 0
-#endif
+/* Names of bss and data sections. These should be unique names for each
+ compilation unit. */
+
+char *xcoff_bss_section_name;
+char *xcoff_private_data_section_name;
+char *xcoff_private_rodata_section_name;
+char *xcoff_tls_data_section_name;
+char *xcoff_read_only_section_name;
static enum unwind_info_type
rs6000_xcoff_debug_unwind_info (void)
@@ -21466,9 +21462,7 @@ rs6000_xcoff_declare_function_name (FILE *file, const char *name, tree decl)
&data, true);
if (!DECL_IGNORED_P (decl))
{
- if (write_symbols == DBX_DEBUG || write_symbols == XCOFF_DEBUG)
- xcoffout_declare_function (file, decl, buffer);
- else if (dwarf_debuginfo_p ())
+ if (dwarf_debuginfo_p ())
{
name = (*targetm.strip_name_encoding) (name);
fprintf (file, "\t.function .%s,.%s,2,0\n", name, name);
@@ -504,9 +504,6 @@ extern int fixuplabelno;
#undef PREFERRED_DEBUGGING_TYPE
#define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
-/* Historically we have also supported stabs debugging. */
-#define DBX_DEBUGGING_INFO 1
-
#define TARGET_ENCODE_SECTION_INFO rs6000_elf_encode_section_info
#define TARGET_IN_SMALL_DATA_P rs6000_elf_in_small_data_p
@@ -515,11 +512,6 @@ extern int fixuplabelno;
#define RS6000_OUTPUT_BASENAME(FILE, NAME) \
assemble_name (FILE, NAME)
-/* We have to output the stabs for the function name *first*, before
- outputting its label. */
-
-#define DBX_FUNCTION_FIRST
-
/* This is the end of what might become sysv4dbx.h. */
#define TARGET_OS_SYSV_CPP_BUILTINS() \
@@ -21,9 +21,6 @@
#define TARGET_OBJECT_FORMAT OBJECT_XCOFF
-/* The RS/6000 uses the XCOFF format. */
-#define XCOFF_DEBUGGING_INFO 1
-
/* Define if the object format being used is COFF or a superset. */
#define OBJECT_FORMAT_COFF
@@ -623,7 +623,6 @@ typedef unsigned int CUMULATIVE_ARGS;
#undef PREFERRED_DEBUGGING_TYPE
#define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
-#define DBX_DEBUGGING_INFO 1
#define DWARF2_DEBUGGING_INFO 1
#define INCOMING_FRAME_SP_OFFSET 4
@@ -67,9 +67,6 @@ along with GCC; see the file COPYING3. If not see
#define ASM_GENERATE_INTERNAL_LABEL(STRING, PREFIX, NUM) \
sprintf ((STRING), "*%s%s%ld", LOCAL_LABEL_PREFIX, (PREFIX), (long)(NUM))
-#define DBX_LINES_FUNCTION_RELATIVE 1
-#define DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
-
#undef STARTFILE_SPEC
#define STARTFILE_SPEC \
"%{!shared: crt1.o%s} crti.o%s \
@@ -498,11 +498,7 @@ along with GCC; see the file COPYING3. If not see
#define AS_NEEDS_DASH_FOR_PIPED_INPUT
-/* The Solaris assembler cannot grok .stabd directives. */
-#undef NO_DBX_BNSYM_ENSYM
-#define NO_DBX_BNSYM_ENSYM 1
#endif
-
/* Solaris has an implementation of __enable_execute_stack. */
#define HAVE_ENABLE_EXECUTE_STACK
@@ -109,12 +109,6 @@ along with GCC; see the file COPYING3. If not see
/************************[ Debugger stuff ]*********************************/
-/* This is the char to use for continuation (in case we need to turn
- continuation back on). */
-
-#undef DBX_CONTIN_CHAR
-#define DBX_CONTIN_CHAR '?'
-
/* DWARF bits. */
/* Follow Irix 6 and not the Dwarf2 draft in using 64-bit offsets.
@@ -46,11 +46,6 @@ along with GCC; see the file COPYING3. If not see
#undef PTRDIFF_TYPE
#define PTRDIFF_TYPE "long int"
-/* This is the char to use for continuation (in case we need to turn
- continuation back on). */
-#undef DBX_CONTIN_CHAR
-#define DBX_CONTIN_CHAR '?'
-
#undef LOCAL_LABEL_PREFIX
#define LOCAL_LABEL_PREFIX "."
@@ -1510,14 +1510,6 @@ do { \
#define ADDITIONAL_REGISTER_NAMES \
{{"ccr", SPARC_ICC_REG}, {"cc", SPARC_ICC_REG}}
-/* On Sun 4, this limit is 2048. We use 1000 to be safe, since the length
- can run past this up to a continuation point. Once we used 1500, but
- a single entry in C++ can run more than 500 bytes, due to the length of
- mangled symbol names. dbxout.cc should really be fixed to do
- continuations when they are actually needed instead of trying to
- guess... */
-#define DBX_CONTIN_LENGTH 1000
-
/* This is how to output a command to make the user-level label named NAME
defined for reference from other files. */
@@ -247,9 +247,6 @@ static void
vax_file_start (void)
{
default_file_start ();
-
- if (write_symbols == DBX_DEBUG)
- fprintf (asm_out_file, "___vax_%c_doubles:\n", ASM_DOUBLE_CHAR);
}
/* We can use the BSD C library routines for the libgcc calls that are
@@ -508,27 +508,6 @@ enum reg_class { NO_REGS, ALL_REGS, LIM_REG_CLASSES };
"r8", "r9", "r10", "r11", "ap", "fp", "sp", "pc", \
"psl" }
-/* This is BSD, so it wants DBX format. */
-
-#define DBX_DEBUGGING_INFO 1
-
-/* Do not break .stabs pseudos into continuations. */
-
-#define DBX_CONTIN_LENGTH 0
-
-/* This is the char to use for continuation (in case we need to turn
- continuation back on). */
-
-#define DBX_CONTIN_CHAR '?'
-
-/* Don't use the `xsfoo;' construct in DBX output; this system
- doesn't support it. */
-
-#define DBX_NO_XREFS
-
-/* Output the .stabs for a C `static' variable in the data section. */
-#define DBX_STATIC_STAB_DATA_SECTION
-
/* VAX specific: which type character is used for type double? */
#define ASM_DOUBLE_CHAR (TARGET_G_FLOAT ? 'g' : 'd')
@@ -94,8 +94,6 @@ along with GCC; see the file COPYING3. If not see
#define PREFERRED_DEBUGGING_TYPE DWARF2_DEBUG
/* None of these other formats is supported. */
-#undef DBX_DEBUGGING_INFO
-#undef XCOFF_DEBUGGING_INFO
#undef VMS_DEBUGGING_INFO
/* ------------------------ Misc configuration bits ---------------------- */
@@ -25098,38 +25098,6 @@ cat >>confdefs.h <<_ACEOF
_ACEOF
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for stabs directive" >&5
-$as_echo_n "checking assembler for stabs directive... " >&6; }
-if ${gcc_cv_as_stabs_directive+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- gcc_cv_as_stabs_directive=no
- if test x$gcc_cv_as != x; then
- $as_echo '.stabs "gcc2_compiled.",60,0,0,0' > conftest.s
- if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
- { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }
- then
- gcc_cv_as_stabs_directive=yes
- else
- echo "configure: failed program was" >&5
- cat conftest.s >&5
- fi
- rm -f conftest.o conftest.s
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_stabs_directive" >&5
-$as_echo "$gcc_cv_as_stabs_directive" >&6; }
-if test $gcc_cv_as_stabs_directive = yes; then
-
-$as_echo "#define HAVE_AS_STABS_DIRECTIVE 1" >>confdefs.h
-
-fi
-
-
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for COMDAT group support (GNU as)" >&5
$as_echo_n "checking assembler for COMDAT group support (GNU as)... " >&6; }
if ${gcc_cv_as_comdat_group+:} false; then :
@@ -28179,41 +28147,6 @@ if test $gcc_cv_as_aix_ref = yes; then
$as_echo "#define HAVE_AS_REF 1" >>confdefs.h
-fi
-
-
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for AIX DWARF location lists section support" >&5
-$as_echo_n "checking assembler for AIX DWARF location lists section support... " >&6; }
-if ${gcc_cv_as_aix_dwloc+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- gcc_cv_as_aix_dwloc=no
- if test x$gcc_cv_as != x; then
- $as_echo ' .dwsect 0xA0000
- Lframe..0:
- .vbyte 4,Lframe..0
- ' > conftest.s
- if { ac_try='$gcc_cv_as $gcc_cv_as_flags -o conftest.o conftest.s >&5'
- { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }
- then
- gcc_cv_as_aix_dwloc=yes
- else
- echo "configure: failed program was" >&5
- cat conftest.s >&5
- fi
- rm -f conftest.o conftest.s
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_aix_dwloc" >&5
-$as_echo "$gcc_cv_as_aix_dwloc" >&6; }
-if test $gcc_cv_as_aix_dwloc = yes; then
-
-$as_echo "#define HAVE_XCOFF_DWARF_EXTRAS 1" >>confdefs.h
-
fi
;;
@@ -29711,38 +29644,6 @@ $as_echo "#define HAVE_AS_WORKING_DWARF_N_FLAG 1" >>confdefs.h
fi
fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for --gstabs option" >&5
-$as_echo_n "checking assembler for --gstabs option... " >&6; }
-if ${gcc_cv_as_gstabs_flag+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- gcc_cv_as_gstabs_flag=no
- if test x$gcc_cv_as != x; then
- $as_echo "$insn" > conftest.s
- if { ac_try='$gcc_cv_as $gcc_cv_as_flags --gstabs -o conftest.o conftest.s >&5'
- { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_try\""; } >&5
- (eval $ac_try) 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }
- then
- gcc_cv_as_gstabs_flag=yes
- else
- echo "configure: failed program was" >&5
- cat conftest.s >&5
- fi
- rm -f conftest.o conftest.s
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gcc_cv_as_gstabs_flag" >&5
-$as_echo "$gcc_cv_as_gstabs_flag" >&6; }
-if test $gcc_cv_as_gstabs_flag = yes; then
-
-$as_echo "#define HAVE_AS_GSTABS_DEBUG_FLAG 1" >>confdefs.h
-
-fi
-
-
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking assembler for --debug-prefix-map option" >&5
$as_echo_n "checking assembler for --debug-prefix-map option... " >&6; }
if ${gcc_cv_as_debug_prefix_map_flag+:} false; then :
@@ -3512,11 +3512,6 @@ AC_DEFINE_UNQUOTED(HAVE_LD_ALIGNED_SHF_MERGE,
[`if test $gcc_cv_ld_aligned_shf_merge = yes; then echo 1; else echo 0; fi`],
[Define 0/1 if your linker supports the SHF_MERGE flag with section alignment > 1.])
-gcc_GAS_CHECK_FEATURE([stabs directive], gcc_cv_as_stabs_directive,,
-[.stabs "gcc2_compiled.",60,0,0,0],,
-[AC_DEFINE(HAVE_AS_STABS_DIRECTIVE, 1,
- [Define if your assembler supports .stabs.])])
-
gcc_GAS_CHECK_FEATURE([COMDAT group support (GNU as)],
gcc_cv_as_comdat_group,
[--fatal-warnings],
@@ -5076,15 +5071,6 @@ LCF0:
],,
[AC_DEFINE(HAVE_AS_REF, 1,
[Define if your assembler supports .ref])])
-
- gcc_GAS_CHECK_FEATURE([AIX DWARF location lists section support],
- gcc_cv_as_aix_dwloc,,
- [ .dwsect 0xA0000
- Lframe..0:
- .vbyte 4,Lframe..0
- ],,
- [AC_DEFINE(HAVE_XCOFF_DWARF_EXTRAS, 1,
- [Define if your assembler supports AIX debug frame section label reference.])])
;;
esac
;;
@@ -5728,12 +5714,6 @@ foo:
fi
fi
- gcc_GAS_CHECK_FEATURE([--gstabs option],
- gcc_cv_as_gstabs_flag,
- [--gstabs], [$insn],,
- [AC_DEFINE(HAVE_AS_GSTABS_DEBUG_FLAG, 1,
-[Define if your assembler supports the --gstabs option.])])
-
gcc_GAS_CHECK_FEATURE([--debug-prefix-map option],
gcc_cv_as_debug_prefix_map_flag,
[--debug-prefix-map /a=/b], [$insn],,
deleted file mode 100644
@@ -1,3936 +0,0 @@
-/* Output dbx-format symbol table information from GNU compiler.
- Copyright (C) 1987-2022 Free Software Foundation, Inc.
-
-This file is part of GCC.
-
-GCC is free software; you can redistribute it and/or modify it under
-the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 3, or (at your option) any later
-version.
-
-GCC is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-for more details.
-
-You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING3. If not see
-<http://www.gnu.org/licenses/>. */
-
-
-/* Output dbx-format symbol table data.
- This consists of many symbol table entries, each of them
- a .stabs assembler pseudo-op with four operands:
- a "name" which is really a description of one symbol and its type,
- a "code", which is a symbol defined in stab.h whose name starts with N_,
- an unused operand always 0,
- and a "value" which is an address or an offset.
- The name is enclosed in doublequote characters.
-
- Each function, variable, typedef, and structure tag
- has a symbol table entry to define it.
- The beginning and end of each level of name scoping within
- a function are also marked by special symbol table entries.
-
- The "name" consists of the symbol name, a colon, a kind-of-symbol letter,
- and a data type number. The data type number may be followed by
- "=" and a type definition; normally this will happen the first time
- the type number is mentioned. The type definition may refer to
- other types by number, and those type numbers may be followed
- by "=" and nested definitions.
-
- This can make the "name" quite long.
- When a name is more than 80 characters, we split the .stabs pseudo-op
- into two .stabs pseudo-ops, both sharing the same "code" and "value".
- The first one is marked as continued with a double-backslash at the
- end of its "name".
-
- The kind-of-symbol letter distinguished function names from global
- variables from file-scope variables from parameters from auto
- variables in memory from typedef names from register variables.
- See `dbxout_symbol'.
-
- The "code" is mostly redundant with the kind-of-symbol letter
- that goes in the "name", but not entirely: for symbols located
- in static storage, the "code" says which segment the address is in,
- which controls how it is relocated.
-
- The "value" for a symbol in static storage
- is the core address of the symbol (actually, the assembler
- label for the symbol). For a symbol located in a stack slot
- it is the stack offset; for one in a register, the register number.
- For a typedef symbol, it is zero.
-
- If DEBUG_SYMS_TEXT is defined, all debugging symbols must be
- output while in the text section.
-
- For more on data type definitions, see `dbxout_type'. */
-
-#include "config.h"
-#include "system.h"
-#include "coretypes.h"
-#include "target.h"
-#include "function.h"
-#include "rtl.h"
-#include "tree.h"
-#include "memmodel.h"
-#include "tm_p.h"
-#include "stringpool.h"
-#include "insn-config.h"
-#include "emit-rtl.h"
-#include "cgraph.h"
-#include "diagnostic-core.h"
-#include "fold-const.h"
-#include "varasm.h"
-#include "stor-layout.h"
-#include "reload.h"
-#include "output.h"
-#include "dbxout.h"
-#include "toplev.h"
-#include "debug.h"
-#include "common/common-target.h"
-#include "langhooks.h"
-#include "expr.h"
-#include "file-prefix-map.h" /* remap_debug_filename() */
-#include "flags.h"
-
-#ifdef XCOFF_DEBUGGING_INFO
-#include "xcoffout.h"
-#endif
-
-#ifndef ASM_STABS_OP
-# ifdef XCOFF_DEBUGGING_INFO
-# define ASM_STABS_OP "\t.stabx\t"
-# else
-# define ASM_STABS_OP "\t.stabs\t"
-# endif
-#endif
-
-#ifndef ASM_STABN_OP
-#define ASM_STABN_OP "\t.stabn\t"
-#endif
-
-#ifndef ASM_STABD_OP
-#define ASM_STABD_OP "\t.stabd\t"
-#endif
-
-#ifndef DBX_TYPE_DECL_STABS_CODE
-#define DBX_TYPE_DECL_STABS_CODE N_LSYM
-#endif
-
-#ifndef DBX_STATIC_CONST_VAR_CODE
-#define DBX_STATIC_CONST_VAR_CODE N_FUN
-#endif
-
-#ifndef DBX_REGPARM_STABS_CODE
-#define DBX_REGPARM_STABS_CODE N_RSYM
-#endif
-
-#ifndef DBX_REGPARM_STABS_LETTER
-#define DBX_REGPARM_STABS_LETTER 'P'
-#endif
-
-#ifndef NO_DBX_FUNCTION_END
-#define NO_DBX_FUNCTION_END 0
-#endif
-
-#ifndef NO_DBX_BNSYM_ENSYM
-#define NO_DBX_BNSYM_ENSYM 0
-#endif
-
-#ifndef NO_DBX_MAIN_SOURCE_DIRECTORY
-#define NO_DBX_MAIN_SOURCE_DIRECTORY 0
-#endif
-
-#ifndef DBX_BLOCKS_FUNCTION_RELATIVE
-#define DBX_BLOCKS_FUNCTION_RELATIVE 0
-#endif
-
-#ifndef DBX_LINES_FUNCTION_RELATIVE
-#define DBX_LINES_FUNCTION_RELATIVE 0
-#endif
-
-#ifndef DBX_CONTIN_LENGTH
-#define DBX_CONTIN_LENGTH 80
-#endif
-
-#ifndef DBX_CONTIN_CHAR
-#define DBX_CONTIN_CHAR '\\'
-#endif
-
-enum typestatus {TYPE_UNSEEN, TYPE_XREF, TYPE_DEFINED};
-
-/* Structure recording information about a C data type.
- The status element says whether we have yet output
- the definition of the type. TYPE_XREF says we have
- output it as a cross-reference only.
- The file_number and type_number elements are used if DBX_USE_BINCL
- is defined. */
-
-struct GTY(()) typeinfo {
- enum typestatus status;
- int file_number;
- int type_number;
-};
-
-/* Vector recording information about C data types.
- When we first notice a data type (a tree node),
- we assign it a number using next_type_number.
- That is its index in this vector. */
-
-static GTY ((length ("typevec_len"))) struct typeinfo *typevec;
-
-/* Number of elements of space allocated in `typevec'. */
-
-static GTY(()) int typevec_len;
-
-/* In dbx output, each type gets a unique number.
- This is the number for the next type output.
- The number, once assigned, is in the TYPE_SYMTAB_ADDRESS field. */
-
-static GTY(()) int next_type_number;
-
-/* The C front end may call dbxout_symbol before dbxout_init runs.
- We save all such decls in this list and output them when we get
- to dbxout_init. */
-
-static GTY(()) tree preinit_symbols;
-
-enum binclstatus {BINCL_NOT_REQUIRED, BINCL_PENDING, BINCL_PROCESSED};
-
-/* When using N_BINCL in dbx output, each type number is actually a
- pair of the file number and the type number within the file.
- This is a stack of input files. */
-
-struct dbx_file
-{
- struct dbx_file *next;
- int file_number;
- int next_type_number;
- enum binclstatus bincl_status; /* Keep track of lazy bincl. */
- const char *pending_bincl_name; /* Name of bincl. */
- struct dbx_file *prev; /* Chain to traverse all pending bincls. */
-};
-
-/* This is the top of the stack.
-
- This is not saved for PCH, because restoring a PCH should not change it.
- next_file_number does have to be saved, because the PCH may use some
- file numbers; however, just before restoring a PCH, next_file_number
- should always be 0 because we should not have needed any file numbers
- yet. */
-
-#if (defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)) \
- && defined (DBX_USE_BINCL)
-static struct dbx_file *current_file;
-#endif
-
-/* This is the next file number to use. */
-
-static GTY(()) int next_file_number;
-
-/* A counter for dbxout_function_end. */
-
-static GTY(()) int scope_labelno;
-
-/* A counter for dbxout_source_line. */
-
-static GTY(()) int dbxout_source_line_counter;
-
-/* Number for the next N_SOL filename stabs label. The number 0 is reserved
- for the N_SO filename stabs label. */
-
-static GTY(()) int source_label_number = 1;
-
-/* Last source file name mentioned in a NOTE insn. */
-
-static GTY(()) const char *lastfile;
-
-/* Last line number mentioned in a NOTE insn. */
-
-static GTY(()) unsigned int lastlineno;
-
-/* Used by PCH machinery to detect if 'lastfile' should be reset to
- base_input_file. */
-static GTY(()) int lastfile_is_base;
-
-/* Typical USG systems don't have stab.h, and they also have
- no use for DBX-format debugging info. */
-
-#if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)
-
-#ifdef DBX_USE_BINCL
-/* If zero then there is no pending BINCL. */
-static int pending_bincls = 0;
-#endif
-
-/* The original input file name. */
-static const char *base_input_file;
-
-#ifdef DEBUG_SYMS_TEXT
-#define FORCE_TEXT switch_to_section (current_function_section ())
-#else
-#define FORCE_TEXT
-#endif
-
-#include "gstab.h"
-
-/* 1 if PARM is passed to this function in memory. */
-
-#define PARM_PASSED_IN_MEMORY(PARM) \
- (MEM_P (DECL_INCOMING_RTL (PARM)))
-
-/* A C expression for the integer offset value of an automatic variable
- (N_LSYM) having address X (an RTX). */
-#ifndef DEBUGGER_AUTO_OFFSET
-#define DEBUGGER_AUTO_OFFSET(X) \
- (GET_CODE (X) == PLUS ? INTVAL (XEXP (X, 1)) : 0)
-#endif
-
-/* A C expression for the integer offset value of an argument (N_PSYM)
- having address X (an RTX). The nominal offset is OFFSET.
- Note that we use OFFSET + 0 here to avoid the self-assign warning
- when the macro is called in a context like
- number = DEBUGGER_ARG_OFFSET(number, X) */
-#ifndef DEBUGGER_ARG_OFFSET
-#define DEBUGGER_ARG_OFFSET(OFFSET, X) (OFFSET + 0)
-#endif
-
-/* This obstack holds the stab string currently being constructed. We
- build it up here, then write it out, so we can split long lines up
- properly (see dbxout_finish_complex_stabs). */
-static struct obstack stabstr_ob;
-static size_t stabstr_last_contin_point;
-
-#ifdef DBX_USE_BINCL
-static void emit_bincl_stab (const char *c);
-static void emit_pending_bincls (void);
-#endif
-static inline void emit_pending_bincls_if_required (void);
-
-static void dbxout_init (const char *);
-
-static void dbxout_finish (const char *);
-static void dbxout_start_source_file (unsigned, const char *);
-static void dbxout_end_source_file (unsigned);
-static void dbxout_typedefs (tree);
-static void dbxout_type_index (tree);
-static void dbxout_args (tree);
-static void dbxout_type_fields (tree);
-static void dbxout_type_method_1 (tree);
-static void dbxout_type_methods (tree);
-static void dbxout_range_type (tree, tree, tree);
-static void dbxout_type (tree, int);
-static bool print_int_cst_bounds_in_octal_p (tree, tree, tree);
-static bool is_fortran (void);
-static void dbxout_type_name (tree);
-static void dbxout_class_name_qualifiers (tree);
-static int dbxout_symbol_location (tree, tree, const char *, rtx);
-static void dbxout_symbol_name (tree, const char *, int);
-static void dbxout_common_name (tree, const char *, stab_code_type);
-static const char *dbxout_common_check (tree, int *);
-static void dbxout_early_global_decl (tree);
-static void dbxout_late_global_decl (tree);
-static void dbxout_type_decl (tree, int);
-static void dbxout_handle_pch (unsigned);
-static void debug_free_queue (void);
-
-/* The debug hooks structure. */
-#if defined (DBX_DEBUGGING_INFO)
-
-static void dbxout_source_line (unsigned int, unsigned int, const char *,
- int, bool);
-static void dbxout_switch_text_section (void);
-static void dbxout_begin_prologue (unsigned int, unsigned int, const char *);
-static void dbxout_source_file (const char *);
-static void dbxout_function_end (tree);
-static void dbxout_begin_function (tree);
-static void dbxout_begin_block (unsigned, unsigned);
-static void dbxout_end_block (unsigned, unsigned);
-static void dbxout_function_decl (tree);
-
-const struct gcc_debug_hooks dbx_debug_hooks =
-{
- dbxout_init,
- dbxout_finish,
- debug_nothing_charstar,
- debug_nothing_void,
- debug_nothing_int_charstar,
- debug_nothing_int_charstar,
- dbxout_start_source_file,
- dbxout_end_source_file,
- dbxout_begin_block,
- dbxout_end_block,
- debug_true_const_tree, /* ignore_block */
- dbxout_source_line, /* source_line */
- debug_nothing_int_int_charstar, /* set_ignored_loc */
- dbxout_begin_prologue, /* begin_prologue */
- debug_nothing_int_charstar, /* end_prologue */
- debug_nothing_int_charstar, /* begin_epilogue */
- debug_nothing_int_charstar, /* end_epilogue */
-#ifdef DBX_FUNCTION_FIRST
- dbxout_begin_function,
-#else
- debug_nothing_tree, /* begin_function */
-#endif
- debug_nothing_int, /* end_function */
- debug_nothing_tree, /* register_main_translation_unit */
- dbxout_function_decl,
- dbxout_early_global_decl, /* early_global_decl */
- dbxout_late_global_decl, /* late_global_decl */
- dbxout_type_decl, /* type_decl */
- debug_nothing_tree_tree_tree_bool_bool,/* imported_module_or_decl */
- debug_false_tree_charstarstar_uhwistar,/* die_ref_for_decl */
- debug_nothing_tree_charstar_uhwi, /* register_external_die */
- debug_nothing_tree, /* deferred_inline_function */
- debug_nothing_tree, /* outlining_inline_function */
- debug_nothing_rtx_code_label, /* label */
- dbxout_handle_pch, /* handle_pch */
- debug_nothing_rtx_insn, /* var_location */
- debug_nothing_tree, /* inline_entry */
- debug_nothing_tree, /* size_function */
- dbxout_switch_text_section, /* switch_text_section */
- debug_nothing_tree_tree, /* set_name */
- 0, /* start_end_main_source_file */
- TYPE_SYMTAB_IS_ADDRESS /* tree_type_symtab_field */
-};
-#endif /* DBX_DEBUGGING_INFO */
-
-#if defined (XCOFF_DEBUGGING_INFO)
-const struct gcc_debug_hooks xcoff_debug_hooks =
-{
- dbxout_init,
- dbxout_finish,
- debug_nothing_charstar,
- debug_nothing_void,
- debug_nothing_int_charstar,
- debug_nothing_int_charstar,
- dbxout_start_source_file,
- dbxout_end_source_file,
- xcoffout_begin_block,
- xcoffout_end_block,
- debug_true_const_tree, /* ignore_block */
- xcoffout_source_line,
- debug_nothing_int_int_charstar, /* set_ignored_loc */
- xcoffout_begin_prologue, /* begin_prologue */
- debug_nothing_int_charstar, /* end_prologue */
- debug_nothing_int_charstar, /* begin_epilogue */
- xcoffout_end_epilogue,
- debug_nothing_tree, /* begin_function */
- xcoffout_end_function,
- debug_nothing_tree, /* register_main_translation_unit */
- debug_nothing_tree, /* function_decl */
- dbxout_early_global_decl, /* early_global_decl */
- dbxout_late_global_decl, /* late_global_decl */
- dbxout_type_decl, /* type_decl */
- debug_nothing_tree_tree_tree_bool_bool,/* imported_module_or_decl */
- debug_false_tree_charstarstar_uhwistar,/* die_ref_for_decl */
- debug_nothing_tree_charstar_uhwi, /* register_external_die */
- debug_nothing_tree, /* deferred_inline_function */
- debug_nothing_tree, /* outlining_inline_function */
- debug_nothing_rtx_code_label, /* label */
- dbxout_handle_pch, /* handle_pch */
- debug_nothing_rtx_insn, /* var_location */
- debug_nothing_tree, /* inline_entry */
- debug_nothing_tree, /* size_function */
- debug_nothing_void, /* switch_text_section */
- debug_nothing_tree_tree, /* set_name */
- 0, /* start_end_main_source_file */
- TYPE_SYMTAB_IS_ADDRESS /* tree_type_symtab_field */
-};
-#endif /* XCOFF_DEBUGGING_INFO */
-
-/* Numeric formatting helper macro. Note that this does not handle
- hexadecimal. */
-#define NUMBER_FMT_LOOP(P, NUM, BASE) \
- do \
- { \
- int digit = NUM % BASE; \
- NUM /= BASE; \
- *--P = digit + '0'; \
- } \
- while (NUM > 0)
-
-/* Utility: write a decimal integer NUM to asm_out_file. */
-void
-dbxout_int (int num)
-{
- char buf[64];
- char *p = buf + sizeof buf;
- unsigned int unum;
-
- if (num == 0)
- {
- putc ('0', asm_out_file);
- return;
- }
- if (num < 0)
- {
- putc ('-', asm_out_file);
- unum = -(unsigned int) num;
- }
- else
- unum = num;
-
- NUMBER_FMT_LOOP (p, unum, 10);
-
- while (p < buf + sizeof buf)
- {
- putc (*p, asm_out_file);
- p++;
- }
-}
-
-
-/* Primitives for emitting simple stabs directives. All other stabs
- routines should use these functions instead of directly emitting
- stabs. They are exported because machine-dependent code may need
- to invoke them, e.g. in a DBX_OUTPUT_* macro whose definition
- forwards to code in CPU.c. */
-
-/* The following functions should all be called immediately after one
- of the dbxout_begin_stab* functions (below). They write out
- various things as the value of a stab. */
-
-/* Write out a literal zero as the value of a stab. */
-void
-dbxout_stab_value_zero (void)
-{
- fputs ("0\n", asm_out_file);
-}
-
-/* Write out the label LABEL as the value of a stab. */
-void
-dbxout_stab_value_label (const char *label)
-{
- assemble_name (asm_out_file, label);
- putc ('\n', asm_out_file);
-}
-
-/* Write out the difference of two labels, LABEL - BASE, as the value
- of a stab. */
-void
-dbxout_stab_value_label_diff (const char *label, const char *base)
-{
- assemble_name (asm_out_file, label);
- putc ('-', asm_out_file);
- assemble_name (asm_out_file, base);
- putc ('\n', asm_out_file);
-}
-
-/* Write out an internal label as the value of a stab, and immediately
- emit that internal label. This should be used only when
- dbxout_stabd will not work. STEM is the name stem of the label,
- COUNTERP is a pointer to a counter variable which will be used to
- guarantee label uniqueness. */
-void
-dbxout_stab_value_internal_label (const char *stem, int *counterp)
-{
- char label[100];
- int counter = counterp ? (*counterp)++ : 0;
-
- ASM_GENERATE_INTERNAL_LABEL (label, stem, counter);
- dbxout_stab_value_label (label);
- targetm.asm_out.internal_label (asm_out_file, stem, counter);
-}
-
-/* Write out the difference between BASE and an internal label as the
- value of a stab, and immediately emit that internal label. STEM and
- COUNTERP are as for dbxout_stab_value_internal_label. */
-void
-dbxout_stab_value_internal_label_diff (const char *stem, int *counterp,
- const char *base)
-{
- char label[100];
- int counter = counterp ? (*counterp)++ : 0;
-
- ASM_GENERATE_INTERNAL_LABEL (label, stem, counter);
- dbxout_stab_value_label_diff (label, base);
- targetm.asm_out.internal_label (asm_out_file, stem, counter);
-}
-
-/* The following functions produce specific kinds of stab directives. */
-
-/* Write a .stabd directive with type STYPE and desc SDESC to asm_out_file. */
-void
-dbxout_stabd (int stype, int sdesc)
-{
- fputs (ASM_STABD_OP, asm_out_file);
- dbxout_int (stype);
- fputs (",0,", asm_out_file);
- dbxout_int (sdesc);
- putc ('\n', asm_out_file);
-}
-
-/* Write a .stabn directive with type STYPE. This function stops
- short of emitting the value field, which is the responsibility of
- the caller (normally it will be either a symbol or the difference
- of two symbols). */
-
-void
-dbxout_begin_stabn (int stype)
-{
- fputs (ASM_STABN_OP, asm_out_file);
- dbxout_int (stype);
- fputs (",0,0,", asm_out_file);
-}
-
-/* Write a .stabn directive with type N_SLINE and desc LINE. As above,
- the value field is the responsibility of the caller. */
-void
-dbxout_begin_stabn_sline (int lineno)
-{
- fputs (ASM_STABN_OP, asm_out_file);
- dbxout_int (N_SLINE);
- fputs (",0,", asm_out_file);
- dbxout_int (lineno);
- putc (',', asm_out_file);
-}
-
-/* Begin a .stabs directive with string "", type STYPE, and desc and
- other fields 0. The value field is the responsibility of the
- caller. This function cannot be used for .stabx directives. */
-void
-dbxout_begin_empty_stabs (int stype)
-{
- fputs (ASM_STABS_OP, asm_out_file);
- fputs ("\"\",", asm_out_file);
- dbxout_int (stype);
- fputs (",0,0,", asm_out_file);
-}
-
-/* Begin a .stabs directive with string STR, type STYPE, and desc 0.
- The value field is the responsibility of the caller. */
-void
-dbxout_begin_simple_stabs (const char *str, int stype)
-{
- fputs (ASM_STABS_OP, asm_out_file);
- output_quoted_string (asm_out_file, str);
- putc (',', asm_out_file);
- dbxout_int (stype);
- fputs (",0,0,", asm_out_file);
-}
-
-/* As above but use SDESC for the desc field. */
-void
-dbxout_begin_simple_stabs_desc (const char *str, int stype, int sdesc)
-{
- fputs (ASM_STABS_OP, asm_out_file);
- output_quoted_string (asm_out_file, str);
- putc (',', asm_out_file);
- dbxout_int (stype);
- fputs (",0,", asm_out_file);
- dbxout_int (sdesc);
- putc (',', asm_out_file);
-}
-
-/* The next set of functions are entirely concerned with production of
- "complex" .stabs directives: that is, .stabs directives whose
- strings have to be constructed piecemeal. dbxout_type,
- dbxout_symbol, etc. use these routines heavily. The string is queued
- up in an obstack, then written out by dbxout_finish_complex_stabs, which
- is also responsible for splitting it up if it exceeds DBX_CONTIN_LENGTH.
- (You might think it would be more efficient to go straight to stdio
- when DBX_CONTIN_LENGTH is 0 (i.e. no length limit) but that turns
- out not to be the case, and anyway this needs fewer #ifdefs.) */
-
-/* Begin a complex .stabs directive. If we can, write the initial
- ASM_STABS_OP to the asm_out_file. */
-
-static void
-dbxout_begin_complex_stabs (void)
-{
- emit_pending_bincls_if_required ();
- FORCE_TEXT;
- fputs (ASM_STABS_OP, asm_out_file);
- putc ('"', asm_out_file);
- gcc_assert (stabstr_last_contin_point == 0);
-}
-
-/* As above, but do not force text or emit pending bincls. This is
- used by dbxout_symbol_location, which needs to do something else. */
-static void
-dbxout_begin_complex_stabs_noforcetext (void)
-{
- fputs (ASM_STABS_OP, asm_out_file);
- putc ('"', asm_out_file);
- gcc_assert (stabstr_last_contin_point == 0);
-}
-
-/* Add CHR, a single character, to the string being built. */
-#define stabstr_C(chr) obstack_1grow (&stabstr_ob, chr)
-
-/* Add STR, a normal C string, to the string being built. */
-#define stabstr_S(str) obstack_grow (&stabstr_ob, str, strlen (str))
-
-/* Add the text of ID, an IDENTIFIER_NODE, to the string being built. */
-#define stabstr_I(id) obstack_grow (&stabstr_ob, \
- IDENTIFIER_POINTER (id), \
- IDENTIFIER_LENGTH (id))
-
-/* Add NUM, a signed decimal number, to the string being built. */
-static void
-stabstr_D (HOST_WIDE_INT num)
-{
- char buf[64];
- char *p = buf + sizeof buf;
- unsigned HOST_WIDE_INT unum;
-
- if (num == 0)
- {
- stabstr_C ('0');
- return;
- }
- if (num < 0)
- {
- stabstr_C ('-');
- unum = -(unsigned HOST_WIDE_INT) num;
- }
- else
- unum = num;
-
- NUMBER_FMT_LOOP (p, unum, 10);
-
- obstack_grow (&stabstr_ob, p, (buf + sizeof buf) - p);
-}
-
-/* Add NUM, an unsigned decimal number, to the string being built. */
-static void
-stabstr_U (unsigned HOST_WIDE_INT num)
-{
- char buf[64];
- char *p = buf + sizeof buf;
- if (num == 0)
- {
- stabstr_C ('0');
- return;
- }
- NUMBER_FMT_LOOP (p, num, 10);
- obstack_grow (&stabstr_ob, p, (buf + sizeof buf) - p);
-}
-
-/* Add CST, an INTEGER_CST tree, to the string being built as an
- unsigned octal number. This routine handles values which are
- larger than a single HOST_WIDE_INT. */
-static void
-stabstr_O (tree cst)
-{
- int prec = TYPE_PRECISION (TREE_TYPE (cst));
- int res_pres = prec % 3;
- int i;
- unsigned int digit;
-
- /* Leading zero for base indicator. */
- stabstr_C ('0');
-
- /* If the value is zero, the base indicator will serve as the value
- all by itself. */
- if (wi::to_wide (cst) == 0)
- return;
-
- /* GDB wants constants with no extra leading "1" bits, so
- we need to remove any sign-extension that might be
- present. */
- if (res_pres == 1)
- {
- digit = wi::extract_uhwi (wi::to_wide (cst), prec - 1, 1);
- stabstr_C ('0' + digit);
- }
- else if (res_pres == 2)
- {
- digit = wi::extract_uhwi (wi::to_wide (cst), prec - 2, 2);
- stabstr_C ('0' + digit);
- }
-
- prec -= res_pres;
- for (i = prec - 3; i >= 0; i = i - 3)
- {
- digit = wi::extract_uhwi (wi::to_wide (cst), i, 3);
- stabstr_C ('0' + digit);
- }
-}
-
-/* Called whenever it is safe to break a stabs string into multiple
- .stabs directives. If the current string has exceeded the limit
- set by DBX_CONTIN_LENGTH, mark the current position in the buffer
- as a continuation point by inserting DBX_CONTIN_CHAR (doubled if
- it is a backslash) and a null character. */
-static inline void
-stabstr_continue (void)
-{
- if (DBX_CONTIN_LENGTH > 0
- && obstack_object_size (&stabstr_ob) - stabstr_last_contin_point
- > DBX_CONTIN_LENGTH)
- {
- if (DBX_CONTIN_CHAR == '\\')
- obstack_1grow (&stabstr_ob, '\\');
- obstack_1grow (&stabstr_ob, DBX_CONTIN_CHAR);
- obstack_1grow (&stabstr_ob, '\0');
- stabstr_last_contin_point = obstack_object_size (&stabstr_ob);
- }
-}
-#define CONTIN stabstr_continue ()
-
-/* Macro subroutine of dbxout_finish_complex_stabs, which emits
- all of the arguments to the .stabs directive after the string.
- Overridden by xcoffout.h. CODE is the stabs code for this symbol;
- LINE is the source line to write into the desc field (in extended
- mode); SYM is the symbol itself.
-
- ADDR, LABEL, and NUMBER are three different ways to represent the
- stabs value field. At most one of these should be nonzero.
-
- ADDR is used most of the time; it represents the value as an
- RTL address constant.
-
- LABEL is used (currently) only for N_CATCH stabs; it represents
- the value as a string suitable for assemble_name.
-
- NUMBER is used when the value is an offset from an implicit base
- pointer (e.g. for a stack variable), or an index (e.g. for a
- register variable). It represents the value as a decimal integer. */
-
-#ifndef DBX_FINISH_STABS
-#define DBX_FINISH_STABS(SYM, CODE, LINE, ADDR, LABEL, NUMBER) \
-do { \
- int line_ = use_gnu_debug_info_extensions ? LINE : 0; \
- \
- dbxout_int (CODE); \
- fputs (",0,", asm_out_file); \
- dbxout_int (line_); \
- putc (',', asm_out_file); \
- if (ADDR) \
- output_addr_const (asm_out_file, ADDR); \
- else if (LABEL) \
- assemble_name (asm_out_file, LABEL); \
- else \
- dbxout_int (NUMBER); \
- putc ('\n', asm_out_file); \
-} while (0)
-#endif
-
-/* Finish the emission of a complex .stabs directive. When DBX_CONTIN_LENGTH
- is zero, this has only to emit the close quote and the remainder of
- the arguments. When it is nonzero, the string has been marshalled in
- stabstr_ob, and this routine is responsible for breaking it up into
- DBX_CONTIN_LENGTH-sized chunks.
-
- SYM is the DECL of the symbol under consideration; it is used only
- for its DECL_SOURCE_LINE. The other arguments are all passed directly
- to DBX_FINISH_STABS; see above for details. */
-
-static void
-dbxout_finish_complex_stabs (tree sym, stab_code_type code,
- rtx addr, const char *label, int number)
-{
- int line ATTRIBUTE_UNUSED;
- char *str;
- size_t len;
-
- line = sym ? DECL_SOURCE_LINE (sym) : 0;
- if (DBX_CONTIN_LENGTH > 0)
- {
- char *chunk;
- size_t chunklen;
-
- /* Nul-terminate the growing string, then get its size and
- address. */
- obstack_1grow (&stabstr_ob, '\0');
-
- len = obstack_object_size (&stabstr_ob);
- chunk = str = XOBFINISH (&stabstr_ob, char *);
-
- /* Within the buffer are a sequence of NUL-separated strings,
- each of which is to be written out as a separate stab
- directive. */
- for (;;)
- {
- chunklen = strlen (chunk);
- fwrite (chunk, 1, chunklen, asm_out_file);
- fputs ("\",", asm_out_file);
-
- /* Must add an extra byte to account for the NUL separator. */
- chunk += chunklen + 1;
- len -= chunklen + 1;
-
- /* Only put a line number on the last stab in the sequence. */
- DBX_FINISH_STABS (sym, code, len == 0 ? line : 0,
- addr, label, number);
- if (len == 0)
- break;
-
- fputs (ASM_STABS_OP, asm_out_file);
- putc ('"', asm_out_file);
- }
- stabstr_last_contin_point = 0;
- }
- else
- {
- /* No continuations - we can put the whole string out at once.
- It is faster to augment the string with the close quote and
- comma than to do a two-character fputs. */
- obstack_grow (&stabstr_ob, "\",", 2);
- len = obstack_object_size (&stabstr_ob);
- str = XOBFINISH (&stabstr_ob, char *);
-
- fwrite (str, 1, len, asm_out_file);
- DBX_FINISH_STABS (sym, code, line, addr, label, number);
- }
- obstack_free (&stabstr_ob, str);
-}
-
-#if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)
-
-/* When -gused is used, emit debug info for only used symbols. But in
- addition to the standard intercepted debug_hooks there are some
- direct calls into this file, i.e., dbxout_symbol, dbxout_parms, and
- dbxout_reg_params. Those routines may also be called from a higher
- level intercepted routine. So to prevent recording data for an inner
- call to one of these for an intercept, we maintain an intercept
- nesting counter (debug_nesting). We only save the intercepted
- arguments if the nesting is 1. */
-static int debug_nesting = 0;
-
-static tree *symbol_queue;
-static int symbol_queue_index = 0;
-static int symbol_queue_size = 0;
-
-#define DBXOUT_DECR_NESTING \
- if (--debug_nesting == 0 && symbol_queue_index > 0) \
- { emit_pending_bincls_if_required (); debug_flush_symbol_queue (); }
-
-#define DBXOUT_DECR_NESTING_AND_RETURN(x) \
- do {--debug_nesting; return (x);} while (0)
-
-#endif /* DBX_DEBUGGING_INFO || XCOFF_DEBUGGING_INFO */
-
-#if defined (DBX_DEBUGGING_INFO)
-
-static void
-dbxout_function_end (tree decl ATTRIBUTE_UNUSED)
-{
- char lscope_label_name[100];
-
- /* The Lscope label must be emitted even if we aren't doing anything
- else; dbxout_block needs it. */
- switch_to_section (current_function_section ());
-
- /* Convert Lscope into the appropriate format for local labels in case
- the system doesn't insert underscores in front of user generated
- labels. */
- ASM_GENERATE_INTERNAL_LABEL (lscope_label_name, "Lscope", scope_labelno);
- targetm.asm_out.internal_label (asm_out_file, "Lscope", scope_labelno);
-
- /* The N_FUN tag at the end of the function is a GNU extension,
- which may be undesirable, and is unnecessary if we do not have
- named sections. */
- if (!use_gnu_debug_info_extensions
- || NO_DBX_FUNCTION_END
- || !targetm_common.have_named_sections)
- return;
-
- /* By convention, GCC will mark the end of a function with an N_FUN
- symbol and an empty string. */
- if (crtl->has_bb_partition)
- {
- dbxout_begin_empty_stabs (N_FUN);
- if (in_cold_section_p)
- dbxout_stab_value_label_diff (crtl->subsections.cold_section_end_label,
- crtl->subsections.cold_section_label);
- else
- dbxout_stab_value_label_diff (crtl->subsections.hot_section_end_label,
- crtl->subsections.hot_section_label);
- }
- else
- {
- char begin_label[20];
- /* Reference current function start using LFBB. */
- ASM_GENERATE_INTERNAL_LABEL (begin_label, "LFBB", scope_labelno);
- dbxout_begin_empty_stabs (N_FUN);
- dbxout_stab_value_label_diff (lscope_label_name, begin_label);
- }
-
- if (!NO_DBX_BNSYM_ENSYM && !flag_debug_only_used_symbols)
- dbxout_stabd (N_ENSYM, 0);
-}
-#endif /* DBX_DEBUGGING_INFO */
-
-/* Get lang description for N_SO stab. */
-static unsigned int ATTRIBUTE_UNUSED
-get_lang_number (void)
-{
- const char *language_string = lang_hooks.name;
- if (lang_GNU_C ())
- return N_SO_C;
- else if (lang_GNU_CXX ())
- return N_SO_CC;
- else if (strcmp (language_string, "GNU F77") == 0)
- return N_SO_FORTRAN;
- else if (lang_GNU_Fortran ())
- return N_SO_FORTRAN90; /* CHECKME */
- else if (strcmp (language_string, "GNU Objective-C") == 0)
- return N_SO_OBJC;
- else if (strcmp (language_string, "GNU Objective-C++") == 0)
- return N_SO_OBJCPLUS;
- else
- return 0;
-
-}
-
-static bool
-is_fortran (void)
-{
- unsigned int lang = get_lang_number ();
-
- return (lang == N_SO_FORTRAN) || (lang == N_SO_FORTRAN90);
-}
-
-/* At the beginning of compilation, start writing the symbol table.
- Initialize `typevec' and output the standard data types of C. */
-
-static void
-dbxout_init (const char *input_file_name)
-{
- char ltext_label_name[100];
- bool used_ltext_label_name = false;
- tree syms = lang_hooks.decls.getdecls ();
- const char *mapped_name;
-
- typevec_len = 100;
- typevec = ggc_cleared_vec_alloc<typeinfo> (typevec_len);
-
- /* stabstr_ob contains one string, which will be just fine with
- 1-byte alignment. */
- obstack_specify_allocation (&stabstr_ob, 0, 1, xmalloc, free);
-
- /* Convert Ltext into the appropriate format for local labels in case
- the system doesn't insert underscores in front of user generated
- labels. */
- ASM_GENERATE_INTERNAL_LABEL (ltext_label_name, "Ltext", 0);
-
- /* Put the current working directory in an N_SO symbol. */
- if (use_gnu_debug_info_extensions && !NO_DBX_MAIN_SOURCE_DIRECTORY)
- {
- static const char *cwd;
-
- if (!cwd)
- {
- cwd = get_src_pwd ();
- if (cwd[0] == '\0')
- cwd = "/";
- else if (!IS_DIR_SEPARATOR (cwd[strlen (cwd) - 1]))
- cwd = concat (cwd, "/", NULL);
- cwd = remap_debug_filename (cwd);
- }
-#ifdef DBX_OUTPUT_MAIN_SOURCE_DIRECTORY
- DBX_OUTPUT_MAIN_SOURCE_DIRECTORY (asm_out_file, cwd);
-#else /* no DBX_OUTPUT_MAIN_SOURCE_DIRECTORY */
- dbxout_begin_simple_stabs_desc (cwd, N_SO, get_lang_number ());
- dbxout_stab_value_label (ltext_label_name);
- used_ltext_label_name = true;
-#endif /* no DBX_OUTPUT_MAIN_SOURCE_DIRECTORY */
- }
-
- mapped_name = remap_debug_filename (input_file_name);
-#ifdef DBX_OUTPUT_MAIN_SOURCE_FILENAME
- DBX_OUTPUT_MAIN_SOURCE_FILENAME (asm_out_file, mapped_name);
-#else
- dbxout_begin_simple_stabs_desc (mapped_name, N_SO, get_lang_number ());
- dbxout_stab_value_label (ltext_label_name);
- used_ltext_label_name = true;
-#endif
-
- if (used_ltext_label_name)
- {
- switch_to_section (text_section);
- targetm.asm_out.internal_label (asm_out_file, "Ltext", 0);
- }
-
- /* Emit an N_OPT stab to indicate that this file was compiled by GCC.
- The string used is historical. */
-#ifndef NO_DBX_GCC_MARKER
- dbxout_begin_simple_stabs ("gcc2_compiled.", N_OPT);
- dbxout_stab_value_zero ();
-#endif
-
- base_input_file = lastfile = input_file_name;
-
- next_type_number = 1;
-
-#ifdef DBX_USE_BINCL
- current_file = XNEW (struct dbx_file);
- current_file->next = NULL;
- current_file->file_number = 0;
- current_file->next_type_number = 1;
- next_file_number = 1;
- current_file->prev = NULL;
- current_file->bincl_status = BINCL_NOT_REQUIRED;
- current_file->pending_bincl_name = NULL;
-#endif
-
- /* Get all permanent types that have typedef names, and output them
- all, except for those already output. Some language front ends
- put these declarations in the top-level scope; some do not;
- the latter are responsible for calling debug_hooks->type_decl from
- their record_builtin_type function. */
- dbxout_typedefs (syms);
-
- if (preinit_symbols)
- {
- tree t;
- for (t = nreverse (preinit_symbols); t; t = TREE_CHAIN (t))
- dbxout_symbol (TREE_VALUE (t), 0);
- preinit_symbols = 0;
- }
-}
-
-/* Output any typedef names for types described by TYPE_DECLs in SYMS. */
-
-static void
-dbxout_typedefs (tree syms)
-{
- for (; syms != NULL_TREE; syms = DECL_CHAIN (syms))
- {
- if (TREE_CODE (syms) == TYPE_DECL)
- {
- tree type = TREE_TYPE (syms);
- if (TYPE_NAME (type)
- && TREE_CODE (TYPE_NAME (type)) == TYPE_DECL
- && COMPLETE_OR_VOID_TYPE_P (type)
- && ! TREE_ASM_WRITTEN (TYPE_NAME (type)))
- dbxout_symbol (TYPE_NAME (type), 0);
- }
- }
-}
-
-#ifdef DBX_USE_BINCL
-/* Emit BINCL stab using given name. */
-static void
-emit_bincl_stab (const char *name)
-{
- dbxout_begin_simple_stabs (name, N_BINCL);
- dbxout_stab_value_zero ();
-}
-
-/* If there are pending bincls then it is time to emit all of them. */
-
-static inline void
-emit_pending_bincls_if_required (void)
-{
- if (pending_bincls)
- emit_pending_bincls ();
-}
-
-/* Emit all pending bincls. */
-
-static void
-emit_pending_bincls (void)
-{
- struct dbx_file *f = current_file;
-
- /* Find first pending bincl. */
- while (f->bincl_status == BINCL_PENDING)
- f = f->next;
-
- /* Now emit all bincls. */
- f = f->prev;
-
- while (f)
- {
- if (f->bincl_status == BINCL_PENDING)
- {
- emit_bincl_stab (f->pending_bincl_name);
-
- /* Update file number and status. */
- f->file_number = next_file_number++;
- f->bincl_status = BINCL_PROCESSED;
- }
- if (f == current_file)
- break;
- f = f->prev;
- }
-
- /* All pending bincls have been emitted. */
- pending_bincls = 0;
-}
-
-#else
-
-static inline void
-emit_pending_bincls_if_required (void) {}
-#endif
-
-/* Change to reading from a new source file. Generate a N_BINCL stab. */
-
-static void
-dbxout_start_source_file (unsigned int line ATTRIBUTE_UNUSED,
- const char *filename ATTRIBUTE_UNUSED)
-{
-#ifdef DBX_USE_BINCL
- struct dbx_file *n = XNEW (struct dbx_file);
-
- n->next = current_file;
- n->next_type_number = 1;
- /* Do not assign file number now.
- Delay it until we actually emit BINCL. */
- n->file_number = 0;
- n->prev = NULL;
- current_file->prev = n;
- n->bincl_status = BINCL_PENDING;
- n->pending_bincl_name = remap_debug_filename (filename);
- pending_bincls = 1;
- current_file = n;
-#endif
-}
-
-/* Revert to reading a previous source file. Generate a N_EINCL stab. */
-
-static void
-dbxout_end_source_file (unsigned int line ATTRIBUTE_UNUSED)
-{
-#ifdef DBX_USE_BINCL
- /* Emit EINCL stab only if BINCL is not pending. */
- if (current_file->bincl_status == BINCL_PROCESSED)
- {
- dbxout_begin_stabn (N_EINCL);
- dbxout_stab_value_zero ();
- }
- current_file->bincl_status = BINCL_NOT_REQUIRED;
- current_file = current_file->next;
-#endif
-}
-
-/* Handle a few odd cases that occur when trying to make PCH files work. */
-
-static void
-dbxout_handle_pch (unsigned at_end)
-{
- if (! at_end)
- {
- /* When using the PCH, this file will be included, so we need to output
- a BINCL. */
- dbxout_start_source_file (0, lastfile);
-
- /* The base file when using the PCH won't be the same as
- the base file when it's being generated. */
- lastfile = NULL;
- }
- else
- {
- /* ... and an EINCL. */
- dbxout_end_source_file (0);
-
- /* Deal with cases where 'lastfile' was never actually changed. */
- lastfile_is_base = lastfile == NULL;
- }
-}
-
-#if defined (DBX_DEBUGGING_INFO)
-
-static bool dbxout_block (tree, int, tree, int);
-
-/* Output debugging info to FILE to switch to sourcefile FILENAME. */
-
-static void
-dbxout_source_file (const char *filename)
-{
- if (lastfile == 0 && lastfile_is_base)
- {
- lastfile = base_input_file;
- lastfile_is_base = 0;
- }
-
- if (filename && (lastfile == 0 || strcmp (filename, lastfile)))
- {
- /* Don't change section amid function. */
- if (current_function_decl == NULL_TREE)
- switch_to_section (text_section);
-
- dbxout_begin_simple_stabs (remap_debug_filename (filename), N_SOL);
- dbxout_stab_value_internal_label ("Ltext", &source_label_number);
- lastfile = filename;
- }
-}
-
-/* Output N_BNSYM, line number symbol entry, and local symbol at
- function scope */
-
-static void
-dbxout_begin_prologue (unsigned int lineno,
- unsigned int column ATTRIBUTE_UNUSED,
- const char *filename)
-{
- if (use_gnu_debug_info_extensions
- && !NO_DBX_FUNCTION_END
- && !NO_DBX_BNSYM_ENSYM
- && !flag_debug_only_used_symbols)
- dbxout_stabd (N_BNSYM, 0);
-
- /* pre-increment the scope counter */
- scope_labelno++;
-
- dbxout_source_line (lineno, 0, filename, 0, true);
- /* Output function begin block at function scope, referenced
- by dbxout_block, dbxout_source_line and dbxout_function_end. */
- emit_pending_bincls_if_required ();
- targetm.asm_out.internal_label (asm_out_file, "LFBB", scope_labelno);
-}
-
-/* Output a line number symbol entry for source file FILENAME and line
- number LINENO. */
-
-static void
-dbxout_source_line (unsigned int lineno, unsigned int column ATTRIBUTE_UNUSED,
- const char *filename, int discriminator ATTRIBUTE_UNUSED,
- bool is_stmt ATTRIBUTE_UNUSED)
-{
- dbxout_source_file (filename);
-
-#ifdef DBX_OUTPUT_SOURCE_LINE
- DBX_OUTPUT_SOURCE_LINE (asm_out_file, lineno, dbxout_source_line_counter);
-#else
- if (DBX_LINES_FUNCTION_RELATIVE)
- {
- char begin_label[20];
- dbxout_begin_stabn_sline (lineno);
- /* Reference current function start using LFBB. */
- ASM_GENERATE_INTERNAL_LABEL (begin_label, "LFBB", scope_labelno);
- dbxout_stab_value_internal_label_diff ("LM", &dbxout_source_line_counter,
- begin_label);
- }
- else
- dbxout_stabd (N_SLINE, lineno);
-#endif
- lastlineno = lineno;
-}
-
-/* Unfortunately, at least when emitting relative addresses, STABS
- has no way to express multiple partitions. Represent a function
- as two functions in this case. */
-
-static void
-dbxout_switch_text_section (void)
-{
- /* The N_FUN tag at the end of the function is a GNU extension,
- which may be undesirable, and is unnecessary if we do not have
- named sections. */
- in_cold_section_p = !in_cold_section_p;
- switch_to_section (current_function_section ());
- dbxout_block (DECL_INITIAL (current_function_decl), 0,
- DECL_ARGUMENTS (current_function_decl), -1);
- dbxout_function_end (current_function_decl);
- in_cold_section_p = !in_cold_section_p;
-
- switch_to_section (current_function_section ());
-
- tree context = decl_function_context (current_function_decl);
- extern tree cold_function_name;
-
- dbxout_begin_complex_stabs ();
- stabstr_I (cold_function_name);
- stabstr_S (":f");
-
- tree type = TREE_TYPE (current_function_decl);
- if (TREE_TYPE (type))
- dbxout_type (TREE_TYPE (type), 0);
- else
- dbxout_type (void_type_node, 0);
-
- if (context != 0)
- {
- stabstr_C (',');
- stabstr_I (cold_function_name);
- stabstr_C (',');
- stabstr_I (DECL_NAME (context));
- }
-
- dbxout_finish_complex_stabs (current_function_decl, N_FUN, 0,
- crtl->subsections.cold_section_label, 0);
-
- /* pre-increment the scope counter */
- scope_labelno++;
-
- dbxout_source_line (lastlineno, 0, lastfile, 0, true);
- /* Output function begin block at function scope, referenced
- by dbxout_block, dbxout_source_line and dbxout_function_end. */
- emit_pending_bincls_if_required ();
- targetm.asm_out.internal_label (asm_out_file, "LFBB", scope_labelno);
-}
-
-/* Describe the beginning of an internal block within a function. */
-
-static void
-dbxout_begin_block (unsigned int line ATTRIBUTE_UNUSED, unsigned int n)
-{
- emit_pending_bincls_if_required ();
- targetm.asm_out.internal_label (asm_out_file, "LBB", n);
-}
-
-/* Describe the end line-number of an internal block within a function. */
-
-static void
-dbxout_end_block (unsigned int line ATTRIBUTE_UNUSED, unsigned int n)
-{
- emit_pending_bincls_if_required ();
- targetm.asm_out.internal_label (asm_out_file, "LBE", n);
-}
-
-/* Output dbx data for a function definition.
- This includes a definition of the function name itself (a symbol),
- definitions of the parameters (locating them in the parameter list)
- and then output the block that makes up the function's body
- (including all the auto variables of the function). */
-
-static void
-dbxout_function_decl (tree decl)
-{
- emit_pending_bincls_if_required ();
-#ifndef DBX_FUNCTION_FIRST
- dbxout_begin_function (decl);
-#endif
- dbxout_block (DECL_INITIAL (decl), 0, DECL_ARGUMENTS (decl), -1);
- dbxout_function_end (decl);
-}
-
-#endif /* DBX_DEBUGGING_INFO */
-
-static void
-dbxout_early_global_decl (tree decl ATTRIBUTE_UNUSED)
-{
- /* NYI for non-dwarf. */
-}
-
-/* Debug information for a global DECL. Called from toplev.cc after
- compilation proper has finished. */
-static void
-dbxout_late_global_decl (tree decl)
-{
- if (VAR_P (decl) && !DECL_EXTERNAL (decl))
- {
- int saved_tree_used = TREE_USED (decl);
- TREE_USED (decl) = 1;
- dbxout_symbol (decl, 0);
- TREE_USED (decl) = saved_tree_used;
- }
-}
-
-/* This is just a function-type adapter; dbxout_symbol does exactly
- what we want but returns an int. */
-static void
-dbxout_type_decl (tree decl, int local)
-{
- dbxout_symbol (decl, local);
-}
-
-/* At the end of compilation, finish writing the symbol table.
- The default is to call debug_free_queue but do nothing else. */
-
-static void
-dbxout_finish (const char *filename ATTRIBUTE_UNUSED)
-{
-#ifdef DBX_OUTPUT_MAIN_SOURCE_FILE_END
- DBX_OUTPUT_MAIN_SOURCE_FILE_END (asm_out_file, filename);
-#elif defined DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
- {
- switch_to_section (text_section);
- dbxout_begin_empty_stabs (N_SO);
- dbxout_stab_value_internal_label ("Letext", 0);
- }
-#endif
- debug_free_queue ();
-}
-
-/* Output the index of a type. */
-
-static void
-dbxout_type_index (tree type)
-{
-#ifndef DBX_USE_BINCL
- stabstr_D (TYPE_SYMTAB_ADDRESS (type));
-#else
- struct typeinfo *t = &typevec[TYPE_SYMTAB_ADDRESS (type)];
- stabstr_C ('(');
- stabstr_D (t->file_number);
- stabstr_C (',');
- stabstr_D (t->type_number);
- stabstr_C (')');
-#endif
-}
-
-
-/* Generate the symbols for any queued up type symbols we encountered
- while generating the type info for some originally used symbol.
- This might generate additional entries in the queue. Only when
- the nesting depth goes to 0 is this routine called. */
-
-static void
-debug_flush_symbol_queue (void)
-{
- int i;
-
- /* Make sure that additionally queued items are not flushed
- prematurely. */
-
- ++debug_nesting;
-
- for (i = 0; i < symbol_queue_index; ++i)
- {
- /* If we pushed queued symbols then such symbols must be
- output no matter what anyone else says. Specifically,
- we need to make sure dbxout_symbol() thinks the symbol was
- used and also we need to override TYPE_DECL_SUPPRESS_DEBUG
- which may be set for outside reasons. */
- int saved_tree_used = TREE_USED (symbol_queue[i]);
- int saved_suppress_debug = TYPE_DECL_SUPPRESS_DEBUG (symbol_queue[i]);
- TREE_USED (symbol_queue[i]) = 1;
- TYPE_DECL_SUPPRESS_DEBUG (symbol_queue[i]) = 0;
-
-#ifdef DBX_DEBUGGING_INFO
- dbxout_symbol (symbol_queue[i], 0);
-#endif
-
- TREE_USED (symbol_queue[i]) = saved_tree_used;
- TYPE_DECL_SUPPRESS_DEBUG (symbol_queue[i]) = saved_suppress_debug;
- }
-
- symbol_queue_index = 0;
- --debug_nesting;
-}
-
-/* Queue a type symbol needed as part of the definition of a decl
- symbol. These symbols are generated when debug_flush_symbol_queue()
- is called. */
-
-static void
-debug_queue_symbol (tree decl)
-{
- if (symbol_queue_index >= symbol_queue_size)
- {
- symbol_queue_size += 10;
- symbol_queue = XRESIZEVEC (tree, symbol_queue, symbol_queue_size);
- }
-
- symbol_queue[symbol_queue_index++] = decl;
-}
-
-/* Free symbol queue. */
-static void
-debug_free_queue (void)
-{
- if (symbol_queue)
- {
- free (symbol_queue);
- symbol_queue = NULL;
- symbol_queue_size = 0;
- }
-}
-
-/* Used in several places: evaluates to '0' for a private decl,
- '1' for a protected decl, '2' for a public decl. */
-#define DECL_ACCESSIBILITY_CHAR(DECL) \
-(TREE_PRIVATE (DECL) ? '0' : TREE_PROTECTED (DECL) ? '1' : '2')
-
-/* Subroutine of `dbxout_type'. Output the type fields of TYPE.
- This must be a separate function because anonymous unions require
- recursive calls. */
-
-static void
-dbxout_type_fields (tree type)
-{
- tree tem;
-
- /* Output the name, type, position (in bits), size (in bits) of each
- field that we can support. */
- for (tem = TYPE_FIELDS (type); tem; tem = DECL_CHAIN (tem))
- {
- /* If one of the nodes is an error_mark or its type is then
- return early. */
- if (error_operand_p (tem))
- return;
-
- /* Omit here local type decls until we know how to support them. */
- if (TREE_CODE (tem) == TYPE_DECL
- || TREE_CODE (tem) == TEMPLATE_DECL
- /* Member functions emitted after fields. */
- || TREE_CODE (tem) == FUNCTION_DECL
- /* Omit here the nameless fields that are used to skip bits. */
- || DECL_IGNORED_P (tem)
- /* Omit fields whose position or size are variable or too large to
- represent. */
- || (TREE_CODE (tem) == FIELD_DECL
- && (! tree_fits_shwi_p (bit_position (tem))
- || ! DECL_SIZE (tem)
- || ! tree_fits_uhwi_p (DECL_SIZE (tem)))))
- continue;
-
- else if (TREE_CODE (tem) != CONST_DECL)
- {
- /* Continue the line if necessary,
- but not before the first field. */
- if (tem != TYPE_FIELDS (type))
- CONTIN;
-
- if (DECL_NAME (tem))
- stabstr_I (DECL_NAME (tem));
- stabstr_C (':');
-
- if (use_gnu_debug_info_extensions
- && (TREE_PRIVATE (tem) || TREE_PROTECTED (tem)
- || TREE_CODE (tem) != FIELD_DECL))
- {
- stabstr_C ('/');
- stabstr_C (DECL_ACCESSIBILITY_CHAR (tem));
- }
-
- dbxout_type ((TREE_CODE (tem) == FIELD_DECL
- && DECL_BIT_FIELD_TYPE (tem))
- ? DECL_BIT_FIELD_TYPE (tem) : TREE_TYPE (tem), 0);
-
- if (VAR_P (tem))
- {
- if (TREE_STATIC (tem) && use_gnu_debug_info_extensions)
- {
- tree name = DECL_ASSEMBLER_NAME (tem);
-
- stabstr_C (':');
- stabstr_I (name);
- stabstr_C (';');
- }
- else
- /* If TEM is non-static, GDB won't understand it. */
- stabstr_S (",0,0;");
- }
- else
- {
- stabstr_C (',');
- stabstr_D (int_bit_position (tem));
- stabstr_C (',');
- stabstr_D (tree_to_uhwi (DECL_SIZE (tem)));
- stabstr_C (';');
- }
- }
- }
-}
-
-/* Subroutine of `dbxout_type_methods'. Output debug info about the
- method described DECL. */
-
-static void
-dbxout_type_method_1 (tree decl)
-{
- char c1 = 'A', c2;
-
- if (TREE_CODE (TREE_TYPE (decl)) == FUNCTION_TYPE)
- c2 = '?';
- else /* it's a METHOD_TYPE. */
- {
- tree firstarg = TREE_VALUE (TYPE_ARG_TYPES (TREE_TYPE (decl)));
- /* A for normal functions.
- B for `const' member functions.
- C for `volatile' member functions.
- D for `const volatile' member functions. */
- if (TYPE_READONLY (TREE_TYPE (firstarg)))
- c1 += 1;
- if (TYPE_VOLATILE (TREE_TYPE (firstarg)))
- c1 += 2;
-
- if (DECL_VINDEX (decl))
- c2 = '*';
- else
- c2 = '.';
- }
-
- /* ??? Output the mangled name, which contains an encoding of the
- method's type signature. May not be necessary anymore. */
- stabstr_C (':');
- stabstr_I (DECL_ASSEMBLER_NAME (decl));
- stabstr_C (';');
- stabstr_C (DECL_ACCESSIBILITY_CHAR (decl));
- stabstr_C (c1);
- stabstr_C (c2);
-
- if (DECL_VINDEX (decl) && tree_fits_shwi_p (DECL_VINDEX (decl)))
- {
- stabstr_D (tree_to_shwi (DECL_VINDEX (decl)));
- stabstr_C (';');
- dbxout_type (DECL_CONTEXT (decl), 0);
- stabstr_C (';');
- }
-}
-
-/* Subroutine of `dbxout_type'. Output debug info about the member
- functions defined in TYPE. */
-
-static void
-dbxout_type_methods (tree type)
-{
- for (tree fndecl = TYPE_FIELDS (type); fndecl;)
- {
- int need_prefix = 1;
-
- /* Group together all the methods for the same operation.
- These differ in the types of the arguments. */
- for (tree last = NULL_TREE;
- fndecl && (last == NULL_TREE || DECL_NAME (fndecl) == DECL_NAME (last));
- fndecl = DECL_CHAIN (fndecl))
- /* Output the name of the field (after overloading), as
- well as the name of the field before overloading, along
- with its parameter list */
- {
- /* Skip non-functions. */
- if (TREE_CODE (fndecl) != FUNCTION_DECL)
- continue;
-
- /* Also ignore abstract methods; those are only interesting to
- the DWARF backends. */
- if (DECL_IGNORED_P (fndecl) || DECL_ABSTRACT_P (fndecl))
- continue;
-
- CONTIN;
-
- last = fndecl;
-
- /* Redundantly output the plain name, since that's what gdb
- expects. */
- if (need_prefix)
- {
- stabstr_I (DECL_NAME (fndecl));
- stabstr_S ("::");
- need_prefix = 0;
- }
-
- dbxout_type (TREE_TYPE (fndecl), 0);
- dbxout_type_method_1 (fndecl);
- }
- if (!need_prefix)
- stabstr_C (';');
- }
-}
-
-/* Emit a "range" type specification, which has the form:
- "r<index type>;<lower bound>;<upper bound>;".
- TYPE is an INTEGER_TYPE, LOW and HIGH are the bounds. */
-
-static void
-dbxout_range_type (tree type, tree low, tree high)
-{
- stabstr_C ('r');
- if (TREE_TYPE (type))
- dbxout_type (TREE_TYPE (type), 0);
- else if (TREE_CODE (type) != INTEGER_TYPE)
- dbxout_type (type, 0);
- else
- {
- /* Traditionally, we made sure 'int' was type 1, and builtin types
- were defined to be sub-ranges of int. Unfortunately, this
- does not allow us to distinguish true sub-ranges from integer
- types. So, instead we define integer (non-sub-range) types as
- sub-ranges of themselves. This matters for Chill. If this isn't
- a subrange type, then we want to define it in terms of itself.
- However, in C, this may be an anonymous integer type, and we don't
- want to emit debug info referring to it. Just calling
- dbxout_type_index won't work anyways, because the type hasn't been
- defined yet. We make this work for both cases by checked to see
- whether this is a defined type, referring to it if it is, and using
- 'int' otherwise. */
- if (TYPE_SYMTAB_ADDRESS (type) != 0)
- dbxout_type_index (type);
- else
- dbxout_type_index (integer_type_node);
- }
-
- stabstr_C (';');
- if (low && tree_fits_shwi_p (low))
- {
- if (print_int_cst_bounds_in_octal_p (type, low, high))
- stabstr_O (low);
- else
- stabstr_D (tree_to_shwi (low));
- }
- else
- stabstr_C ('0');
-
- stabstr_C (';');
- if (high && tree_fits_shwi_p (high))
- {
- if (print_int_cst_bounds_in_octal_p (type, low, high))
- stabstr_O (high);
- else
- stabstr_D (tree_to_shwi (high));
- stabstr_C (';');
- }
- else
- stabstr_S ("-1;");
-}
-
-
-/* Output a reference to a type. If the type has not yet been
- described in the dbx output, output its definition now.
- For a type already defined, just refer to its definition
- using the type number.
-
- If FULL is nonzero, and the type has been described only with
- a forward-reference, output the definition now.
- If FULL is zero in this case, just refer to the forward-reference
- using the number previously allocated. */
-
-static void
-dbxout_type (tree type, int full)
-{
- static int anonymous_type_number = 0;
- tree tem, main_variant, low, high;
-
- if (TREE_CODE (type) == INTEGER_TYPE)
- {
- if (TREE_TYPE (type) == 0)
- {
- low = TYPE_MIN_VALUE (type);
- high = TYPE_MAX_VALUE (type);
- }
-
- else if (subrange_type_for_debug_p (type, &low, &high))
- ;
-
- /* If this is a subtype that should not be emitted as a subrange type,
- use the base type. */
- else
- {
- type = TREE_TYPE (type);
- low = TYPE_MIN_VALUE (type);
- high = TYPE_MAX_VALUE (type);
- }
- }
-
- /* If there was an input error and we don't really have a type,
- avoid crashing and write something that is at least valid
- by assuming `int'. */
- if (type == error_mark_node)
- type = integer_type_node;
- else
- {
- if (TYPE_NAME (type)
- && TREE_CODE (TYPE_NAME (type)) == TYPE_DECL
- && TYPE_DECL_SUPPRESS_DEBUG (TYPE_NAME (type)))
- full = 0;
- }
-
- /* Try to find the "main variant" with the same name. */
- if (TYPE_NAME (type) && TREE_CODE (TYPE_NAME (type)) == TYPE_DECL
- && DECL_ORIGINAL_TYPE (TYPE_NAME (type)))
- main_variant = TREE_TYPE (TYPE_NAME (type));
- else
- main_variant = TYPE_MAIN_VARIANT (type);
-
- /* If we are not using extensions, stabs does not distinguish const and
- volatile, so there is no need to make them separate types. */
- if (!use_gnu_debug_info_extensions)
- type = main_variant;
-
- if (TYPE_SYMTAB_ADDRESS (type) == 0)
- {
- /* Type has no dbx number assigned. Assign next available number. */
- TYPE_SYMTAB_ADDRESS (type) = next_type_number++;
-
- /* Make sure type vector is long enough to record about this type. */
-
- if (next_type_number == typevec_len)
- {
- typevec = GGC_RESIZEVEC (struct typeinfo, typevec, typevec_len * 2);
- memset (typevec + typevec_len, 0, typevec_len * sizeof typevec[0]);
- typevec_len *= 2;
- }
-
-#ifdef DBX_USE_BINCL
- emit_pending_bincls_if_required ();
- typevec[TYPE_SYMTAB_ADDRESS (type)].file_number
- = current_file->file_number;
- typevec[TYPE_SYMTAB_ADDRESS (type)].type_number
- = current_file->next_type_number++;
-#endif
- }
-
- if (flag_debug_only_used_symbols)
- {
- if ((TREE_CODE (type) == RECORD_TYPE
- || TREE_CODE (type) == UNION_TYPE
- || TREE_CODE (type) == QUAL_UNION_TYPE
- || TREE_CODE (type) == ENUMERAL_TYPE)
- && TYPE_STUB_DECL (type)
- && DECL_P (TYPE_STUB_DECL (type))
- && ! DECL_IGNORED_P (TYPE_STUB_DECL (type)))
- debug_queue_symbol (TYPE_STUB_DECL (type));
- else if (TYPE_NAME (type)
- && TREE_CODE (TYPE_NAME (type)) == TYPE_DECL)
- debug_queue_symbol (TYPE_NAME (type));
- }
-
- /* Output the number of this type, to refer to it. */
- dbxout_type_index (type);
-
-#ifdef DBX_TYPE_DEFINED
- if (DBX_TYPE_DEFINED (type))
- return;
-#endif
-
- /* If this type's definition has been output or is now being output,
- that is all. */
-
- switch (typevec[TYPE_SYMTAB_ADDRESS (type)].status)
- {
- case TYPE_UNSEEN:
- break;
- case TYPE_XREF:
- /* If we have already had a cross reference,
- and either that's all we want or that's the best we could do,
- don't repeat the cross reference.
- Sun dbx crashes if we do. */
- if (! full || !COMPLETE_TYPE_P (type)
- /* No way in DBX fmt to describe a variable size. */
- || ! tree_fits_uhwi_p (TYPE_SIZE (type)))
- return;
- break;
- case TYPE_DEFINED:
- return;
- }
-
-#ifdef DBX_NO_XREFS
- /* For systems where dbx output does not allow the `=xsNAME:' syntax,
- leave the type-number completely undefined rather than output
- a cross-reference. If we have already used GNU debug info extensions,
- then it is OK to output a cross reference. This is necessary to get
- proper C++ debug output. */
- if ((TREE_CODE (type) == RECORD_TYPE || TREE_CODE (type) == UNION_TYPE
- || TREE_CODE (type) == QUAL_UNION_TYPE
- || TREE_CODE (type) == ENUMERAL_TYPE)
- && ! use_gnu_debug_info_extensions)
- /* We must use the same test here as we use twice below when deciding
- whether to emit a cross-reference. */
- if ((TYPE_NAME (type) != 0
- && ! (TREE_CODE (TYPE_NAME (type)) == TYPE_DECL
- && DECL_IGNORED_P (TYPE_NAME (type)))
- && !full)
- || !COMPLETE_TYPE_P (type)
- /* No way in DBX fmt to describe a variable size. */
- || ! tree_fits_uhwi_p (TYPE_SIZE (type)))
- {
- typevec[TYPE_SYMTAB_ADDRESS (type)].status = TYPE_XREF;
- return;
- }
-#endif
-
- /* Output a definition now. */
- stabstr_C ('=');
-
- /* Mark it as defined, so that if it is self-referent
- we will not get into an infinite recursion of definitions. */
-
- typevec[TYPE_SYMTAB_ADDRESS (type)].status = TYPE_DEFINED;
-
- /* If this type is a variant of some other, hand off. Types with
- different names are usefully distinguished. We only distinguish
- cv-qualified types if we're using extensions. */
- if (TYPE_READONLY (type) > TYPE_READONLY (main_variant))
- {
- stabstr_C ('k');
- dbxout_type (build_type_variant (type, 0, TYPE_VOLATILE (type)), 0);
- return;
- }
- else if (TYPE_VOLATILE (type) > TYPE_VOLATILE (main_variant))
- {
- stabstr_C ('B');
- dbxout_type (build_type_variant (type, TYPE_READONLY (type), 0), 0);
- return;
- }
- else if (main_variant != TYPE_MAIN_VARIANT (type))
- {
- if (flag_debug_only_used_symbols)
- {
- tree orig_type = DECL_ORIGINAL_TYPE (TYPE_NAME (type));
-
- if ((TREE_CODE (orig_type) == RECORD_TYPE
- || TREE_CODE (orig_type) == UNION_TYPE
- || TREE_CODE (orig_type) == QUAL_UNION_TYPE
- || TREE_CODE (orig_type) == ENUMERAL_TYPE)
- && TYPE_STUB_DECL (orig_type)
- && ! DECL_IGNORED_P (TYPE_STUB_DECL (orig_type)))
- debug_queue_symbol (TYPE_STUB_DECL (orig_type));
- }
- /* 'type' is a typedef; output the type it refers to. */
- dbxout_type (DECL_ORIGINAL_TYPE (TYPE_NAME (type)), 0);
- return;
- }
- /* else continue. */
-
- switch (TREE_CODE (type))
- {
- case VOID_TYPE:
- case NULLPTR_TYPE:
- case LANG_TYPE:
- case OPAQUE_TYPE:
- /* For a void type, just define it as itself; i.e., "5=5".
- This makes us consider it defined
- without saying what it is. The debugger will make it
- a void type when the reference is seen, and nothing will
- ever override that default. */
- dbxout_type_index (type);
- break;
-
- case INTEGER_TYPE:
- if (type == char_type_node && ! TYPE_UNSIGNED (type))
- {
- /* Output the type `char' as a subrange of itself!
- I don't understand this definition, just copied it
- from the output of pcc.
- This used to use `r2' explicitly and we used to
- take care to make sure that `char' was type number 2. */
- stabstr_C ('r');
- dbxout_type_index (type);
- stabstr_S (";0;127;");
- }
-
- /* If this is a subtype of another integer type, always prefer to
- write it as a subtype. */
- else if (TREE_TYPE (type) != 0
- && TREE_CODE (TREE_TYPE (type)) == INTEGER_TYPE)
- {
- /* If the size is non-standard, say what it is if we can use
- GDB extensions. */
-
- if (use_gnu_debug_info_extensions
- && TYPE_PRECISION (type) != TYPE_PRECISION (integer_type_node))
- {
- stabstr_S ("@s");
- stabstr_D (TYPE_PRECISION (type));
- stabstr_C (';');
- }
-
- dbxout_range_type (type, low, high);
- }
-
- else
- {
- /* If the size is non-standard, say what it is if we can use
- GDB extensions. */
-
- if (use_gnu_debug_info_extensions
- && TYPE_PRECISION (type) != TYPE_PRECISION (integer_type_node))
- {
- stabstr_S ("@s");
- stabstr_D (TYPE_PRECISION (type));
- stabstr_C (';');
- }
-
- if (print_int_cst_bounds_in_octal_p (type, low, high))
- {
- stabstr_C ('r');
-
- /* If this type derives from another type, output type index of
- parent type. This is particularly important when parent type
- is an enumerated type, because not generating the parent type
- index would transform the definition of this enumerated type
- into a plain unsigned type. */
- if (TREE_TYPE (type) != 0)
- dbxout_type_index (TREE_TYPE (type));
- else
- dbxout_type_index (type);
-
- stabstr_C (';');
- stabstr_O (low);
- stabstr_C (';');
- stabstr_O (high);
- stabstr_C (';');
- }
-
- else
- /* Output other integer types as subranges of `int'. */
- dbxout_range_type (type, low, high);
- }
-
- break;
-
- case REAL_TYPE:
- case FIXED_POINT_TYPE:
- /* This used to say `r1' and we used to take care
- to make sure that `int' was type number 1. */
- stabstr_C ('r');
- dbxout_type_index (integer_type_node);
- stabstr_C (';');
- stabstr_D (int_size_in_bytes (type));
- stabstr_S (";0;");
- break;
-
- case BOOLEAN_TYPE:
- if (use_gnu_debug_info_extensions)
- {
- stabstr_S ("@s");
- stabstr_D (BITS_PER_UNIT * int_size_in_bytes (type));
- stabstr_S (";-16;");
- }
- else /* Define as enumeral type (False, True) */
- stabstr_S ("eFalse:0,True:1,;");
- break;
-
- case COMPLEX_TYPE:
- /* Differs from the REAL_TYPE by its new data type number.
- R3 is NF_COMPLEX. We don't try to use any of the other NF_*
- codes since gdb doesn't care anyway. */
-
- if (TREE_CODE (TREE_TYPE (type)) == REAL_TYPE)
- {
- stabstr_S ("R3;");
- stabstr_D (2 * int_size_in_bytes (TREE_TYPE (type)));
- stabstr_S (";0;");
- }
- else
- {
- /* Output a complex integer type as a structure,
- pending some other way to do it. */
- stabstr_C ('s');
- stabstr_D (int_size_in_bytes (type));
-
- stabstr_S ("real:");
- dbxout_type (TREE_TYPE (type), 0);
- stabstr_S (",0,");
- stabstr_D (TYPE_PRECISION (TREE_TYPE (type)));
-
- stabstr_S (";imag:");
- dbxout_type (TREE_TYPE (type), 0);
- stabstr_C (',');
- stabstr_D (TYPE_PRECISION (TREE_TYPE (type)));
- stabstr_C (',');
- stabstr_D (TYPE_PRECISION (TREE_TYPE (type)));
- stabstr_S (";;");
- }
- break;
-
- case ARRAY_TYPE:
- /* Make arrays of packed bits look like bitstrings for chill. */
- if (TYPE_PACKED (type) && use_gnu_debug_info_extensions)
- {
- stabstr_S ("@s");
- stabstr_D (BITS_PER_UNIT * int_size_in_bytes (type));
- stabstr_S (";@S;S");
- dbxout_type (TYPE_DOMAIN (type), 0);
- break;
- }
-
- /* Output "a" followed by a range type definition
- for the index type of the array
- followed by a reference to the target-type.
- ar1;0;N;M for a C array of type M and size N+1. */
- /* Check if a character string type, which in Chill is
- different from an array of characters. */
- if (TYPE_STRING_FLAG (type) && use_gnu_debug_info_extensions)
- {
- stabstr_S ("@S;");
- }
- tem = TYPE_DOMAIN (type);
- if (tem == NULL)
- {
- stabstr_S ("ar");
- dbxout_type_index (integer_type_node);
- stabstr_S (";0;-1;");
- }
- else
- {
- stabstr_C ('a');
- dbxout_range_type (tem, TYPE_MIN_VALUE (tem), TYPE_MAX_VALUE (tem));
- }
-
- dbxout_type (TREE_TYPE (type), 0);
- break;
-
- case VECTOR_TYPE:
- /* Make vectors look like an array. */
- if (use_gnu_debug_info_extensions)
- stabstr_S ("@V;");
-
- /* Output "a" followed by a range type definition
- for the index type of the array
- followed by a reference to the target-type.
- ar1;0;N;M for a C array of type M and size N+1. */
- stabstr_C ('a');
- dbxout_range_type (integer_type_node, size_zero_node,
- size_int (TYPE_VECTOR_SUBPARTS (type) - 1));
-
- dbxout_type (TREE_TYPE (type), 0);
- break;
-
- case RECORD_TYPE:
- case UNION_TYPE:
- case QUAL_UNION_TYPE:
- {
- tree binfo = TYPE_BINFO (type);
-
- /* Output a structure type. We must use the same test here as we
- use in the DBX_NO_XREFS case above. */
- if ((TYPE_NAME (type) != 0
- && ! (TREE_CODE (TYPE_NAME (type)) == TYPE_DECL
- && DECL_IGNORED_P (TYPE_NAME (type)))
- && !full)
- || !COMPLETE_TYPE_P (type)
- /* No way in DBX fmt to describe a variable size. */
- || ! tree_fits_uhwi_p (TYPE_SIZE (type)))
- {
- /* If the type is just a cross reference, output one
- and mark the type as partially described.
- If it later becomes defined, we will output
- its real definition.
- If the type has a name, don't nest its definition within
- another type's definition; instead, output an xref
- and let the definition come when the name is defined. */
- stabstr_S ((TREE_CODE (type) == RECORD_TYPE) ? "xs" : "xu");
- if (TYPE_IDENTIFIER (type))
- {
- /* Note that the C frontend creates for anonymous variable
- length records/unions TYPE_NAME with DECL_NAME NULL. */
- dbxout_type_name (type);
- }
- else
- {
- stabstr_S ("$$");
- stabstr_D (anonymous_type_number++);
- }
-
- stabstr_C (':');
- typevec[TYPE_SYMTAB_ADDRESS (type)].status = TYPE_XREF;
- break;
- }
-
- /* Identify record or union, and print its size. */
- stabstr_C ((TREE_CODE (type) == RECORD_TYPE) ? 's' : 'u');
- stabstr_D (int_size_in_bytes (type));
-
- if (binfo)
- {
- int i;
- tree child;
- vec<tree, va_gc> *accesses = BINFO_BASE_ACCESSES (binfo);
-
- if (use_gnu_debug_info_extensions)
- {
- if (BINFO_N_BASE_BINFOS (binfo))
- {
- stabstr_C ('!');
- stabstr_U (BINFO_N_BASE_BINFOS (binfo));
- stabstr_C (',');
- }
- }
- for (i = 0; BINFO_BASE_ITERATE (binfo, i, child); i++)
- {
- tree access = (accesses ? (*accesses)[i] : access_public_node);
-
- if (use_gnu_debug_info_extensions)
- {
- stabstr_C (BINFO_VIRTUAL_P (child) ? '1' : '0');
- stabstr_C (access == access_public_node ? '2' :
- access == access_protected_node
- ? '1' :'0');
- if (BINFO_VIRTUAL_P (child)
- && (lang_GNU_CXX ()
- || strcmp (lang_hooks.name, "GNU Objective-C++") == 0))
- /* For a virtual base, print the (negative)
- offset within the vtable where we must look
- to find the necessary adjustment. */
- stabstr_D
- (tree_to_shwi (BINFO_VPTR_FIELD (child))
- * BITS_PER_UNIT);
- else
- stabstr_D (tree_to_shwi (BINFO_OFFSET (child))
- * BITS_PER_UNIT);
- stabstr_C (',');
- dbxout_type (BINFO_TYPE (child), 0);
- stabstr_C (';');
- }
- else
- {
- /* Print out the base class information with
- fields which have the same names at the types
- they hold. */
- dbxout_type_name (BINFO_TYPE (child));
- stabstr_C (':');
- dbxout_type (BINFO_TYPE (child), full);
- stabstr_C (',');
- stabstr_D (tree_to_shwi (BINFO_OFFSET (child))
- * BITS_PER_UNIT);
- stabstr_C (',');
- stabstr_D
- (tree_to_shwi (TYPE_SIZE (BINFO_TYPE (child)))
- * BITS_PER_UNIT);
- stabstr_C (';');
- }
- }
- }
- }
-
- /* Write out the field declarations. */
- dbxout_type_fields (type);
- if (use_gnu_debug_info_extensions)
- dbxout_type_methods (type);
-
- stabstr_C (';');
-
- if (use_gnu_debug_info_extensions && TREE_CODE (type) == RECORD_TYPE
- /* Avoid the ~ if we don't really need it--it confuses dbx. */
- && TYPE_VFIELD (type))
- {
-
- /* We need to write out info about what field this class
- uses as its "main" vtable pointer field, because if this
- field is inherited from a base class, GDB cannot necessarily
- figure out which field it's using in time. */
- stabstr_S ("~%");
- dbxout_type (DECL_FCONTEXT (TYPE_VFIELD (type)), 0);
- stabstr_C (';');
- }
- break;
-
- case ENUMERAL_TYPE:
- /* We must use the same test here as we use in the DBX_NO_XREFS case
- above. We simplify it a bit since an enum will never have a variable
- size. */
- if ((TYPE_NAME (type) != 0
- && ! (TREE_CODE (TYPE_NAME (type)) == TYPE_DECL
- && DECL_IGNORED_P (TYPE_NAME (type)))
- && !full)
- || !COMPLETE_TYPE_P (type))
- {
- stabstr_S ("xe");
- dbxout_type_name (type);
- typevec[TYPE_SYMTAB_ADDRESS (type)].status = TYPE_XREF;
- stabstr_C (':');
- return;
- }
- if (use_gnu_debug_info_extensions
- && TYPE_PRECISION (type) != TYPE_PRECISION (integer_type_node))
- {
- stabstr_S ("@s");
- stabstr_D (TYPE_PRECISION (type));
- stabstr_C (';');
- }
-
- stabstr_C ('e');
- for (tem = TYPE_VALUES (type); tem; tem = TREE_CHAIN (tem))
- {
- tree value = TREE_VALUE (tem);
-
- stabstr_I (TREE_PURPOSE (tem));
- stabstr_C (':');
-
- if (TREE_CODE (value) == CONST_DECL)
- value = DECL_INITIAL (value);
-
- if (cst_and_fits_in_hwi (value))
- stabstr_D (TREE_INT_CST_LOW (value));
- else
- stabstr_O (value);
-
- stabstr_C (',');
- if (TREE_CHAIN (tem) != 0)
- CONTIN;
- }
-
- stabstr_C (';');
- break;
-
- case POINTER_TYPE:
- stabstr_C ('*');
- dbxout_type (TREE_TYPE (type), 0);
- break;
-
- case METHOD_TYPE:
- if (use_gnu_debug_info_extensions)
- {
- stabstr_C ('#');
-
- /* Write the argument types out longhand. */
- dbxout_type (TYPE_METHOD_BASETYPE (type), 0);
- stabstr_C (',');
- dbxout_type (TREE_TYPE (type), 0);
- dbxout_args (TYPE_ARG_TYPES (type));
- stabstr_C (';');
- }
- else
- /* Treat it as a function type. */
- dbxout_type (TREE_TYPE (type), 0);
- break;
-
- case OFFSET_TYPE:
- if (use_gnu_debug_info_extensions)
- {
- stabstr_C ('@');
- dbxout_type (TYPE_OFFSET_BASETYPE (type), 0);
- stabstr_C (',');
- dbxout_type (TREE_TYPE (type), 0);
- }
- else
- /* Should print as an int, because it is really just an offset. */
- dbxout_type (integer_type_node, 0);
- break;
-
- case REFERENCE_TYPE:
- if (use_gnu_debug_info_extensions)
- {
- stabstr_C ('&');
- }
- else
- stabstr_C ('*');
- dbxout_type (TREE_TYPE (type), 0);
- break;
-
- case FUNCTION_TYPE:
- stabstr_C ('f');
- dbxout_type (TREE_TYPE (type), 0);
- break;
-
- default:
- /* A C++ function with deduced return type can have a TEMPLATE_TYPE_PARM
- named 'auto' in its type.
- No debug info for TEMPLATE_TYPE_PARM type supported yet. */
- if (lang_GNU_CXX ())
- {
- tree name = TYPE_IDENTIFIER (type);
- if (name == get_identifier ("auto")
- || name == get_identifier ("decltype(auto)"))
- break;
- }
-
- gcc_unreachable ();
- }
-}
-
-/* Return nonzero if the given type represents an integer whose bounds
- should be printed in octal format. */
-
-static bool
-print_int_cst_bounds_in_octal_p (tree type, tree low, tree high)
-{
- /* If we can use GDB extensions and the size is wider than a long
- (the size used by GDB to read them) or we may have trouble writing
- the bounds the usual way, write them in octal. Note the test is for
- the *target's* size of "long", not that of the host. The host test
- is just to make sure we can write it out in case the host wide int
- is narrower than the target "long".
-
- For unsigned types, we use octal if they are the same size or larger.
- This is because we print the bounds as signed decimal, and hence they
- can't span same size unsigned types. */
-
- if (use_gnu_debug_info_extensions
- && low && TREE_CODE (low) == INTEGER_CST
- && high && TREE_CODE (high) == INTEGER_CST
- && (TYPE_PRECISION (type) > TYPE_PRECISION (integer_type_node)
- || ((TYPE_PRECISION (type) == TYPE_PRECISION (integer_type_node))
- && TYPE_UNSIGNED (type))
- || TYPE_PRECISION (type) > HOST_BITS_PER_WIDE_INT
- || (TYPE_PRECISION (type) == HOST_BITS_PER_WIDE_INT
- && TYPE_UNSIGNED (type))))
- return TRUE;
- else
- return FALSE;
-}
-
-/* Output the name of type TYPE, with no punctuation.
- Such names can be set up either by typedef declarations
- or by struct, enum and union tags. */
-
-static void
-dbxout_type_name (tree type)
-{
- tree t = TYPE_NAME (type);
-
- gcc_assert (t);
- switch (TREE_CODE (t))
- {
- case IDENTIFIER_NODE:
- break;
- case TYPE_DECL:
- t = DECL_NAME (t);
- break;
- default:
- gcc_unreachable ();
- }
-
- stabstr_I (t);
-}
-
-/* Output leading struct or class names needed for qualifying type
- whose scope is limited to a struct or class. */
-
-static void
-dbxout_class_name_qualifiers (tree decl)
-{
- tree context = decl_type_context (decl);
-
- if (context != NULL_TREE
- && TREE_CODE (context) == RECORD_TYPE
- && TYPE_NAME (context) != 0
- && (TREE_CODE (TYPE_NAME (context)) == IDENTIFIER_NODE
- || (DECL_NAME (TYPE_NAME (context)) != 0)))
- {
- tree name = TYPE_NAME (context);
-
- if (TREE_CODE (name) == TYPE_DECL)
- {
- dbxout_class_name_qualifiers (name);
- name = DECL_NAME (name);
- }
- stabstr_I (name);
- stabstr_S ("::");
- }
-}
-
-/* This is a specialized subset of expand_expr for use by dbxout_symbol in
- evaluating DECL_VALUE_EXPR. In particular, we stop if we find decls that
- haven't been expanded, or if the expression is getting so complex we won't
- be able to represent it in stabs anyway. Returns NULL on failure. */
-
-static rtx
-dbxout_expand_expr (tree expr)
-{
- switch (TREE_CODE (expr))
- {
- case VAR_DECL:
- /* We can't handle emulated tls variables, because the address is an
- offset to the return value of __emutls_get_address, and there is no
- way to express that in stabs. Also, there are name mangling issues
- here. We end up with references to undefined symbols if we don't
- disable debug info for these variables. */
- if (!targetm.have_tls && DECL_THREAD_LOCAL_P (expr))
- return NULL;
- if (TREE_STATIC (expr)
- && !TREE_ASM_WRITTEN (expr)
- && !DECL_HAS_VALUE_EXPR_P (expr)
- && !TREE_PUBLIC (expr)
- && DECL_RTL_SET_P (expr)
- && MEM_P (DECL_RTL (expr)))
- {
- /* If this is a var that might not be actually output,
- return NULL, otherwise stabs might reference an undefined
- symbol. */
- varpool_node *node = varpool_node::get (expr);
- if (!node || !node->definition)
- return NULL;
- }
- /* FALLTHRU */
-
- case PARM_DECL:
- case RESULT_DECL:
- if (DECL_HAS_VALUE_EXPR_P (expr))
- return dbxout_expand_expr (DECL_VALUE_EXPR (expr));
- /* FALLTHRU */
-
- case CONST_DECL:
- return DECL_RTL_IF_SET (expr);
-
- case INTEGER_CST:
- return expand_expr (expr, NULL_RTX, VOIDmode, EXPAND_INITIALIZER);
-
- case COMPONENT_REF:
- case ARRAY_REF:
- case ARRAY_RANGE_REF:
- case BIT_FIELD_REF:
- {
- machine_mode mode;
- poly_int64 bitsize, bitpos;
- tree offset, tem;
- int unsignedp, reversep, volatilep = 0;
- rtx x;
-
- tem = get_inner_reference (expr, &bitsize, &bitpos, &offset, &mode,
- &unsignedp, &reversep, &volatilep);
-
- x = dbxout_expand_expr (tem);
- if (x == NULL || !MEM_P (x))
- return NULL;
- if (offset != NULL)
- {
- if (!tree_fits_shwi_p (offset))
- return NULL;
- x = adjust_address_nv (x, mode, tree_to_shwi (offset));
- }
- if (maybe_ne (bitpos, 0))
- x = adjust_address_nv (x, mode, bits_to_bytes_round_down (bitpos));
-
- return x;
- }
-
- default:
- return NULL;
- }
-}
-
-/* Helper function for output_used_types. Queue one entry from the
- used types hash to be output. */
-
-bool
-output_used_types_helper (tree const &type, vec<tree> *types_p)
-{
- if ((TREE_CODE (type) == RECORD_TYPE
- || TREE_CODE (type) == UNION_TYPE
- || TREE_CODE (type) == QUAL_UNION_TYPE
- || TREE_CODE (type) == ENUMERAL_TYPE)
- && TYPE_STUB_DECL (type)
- && DECL_P (TYPE_STUB_DECL (type))
- && ! DECL_IGNORED_P (TYPE_STUB_DECL (type)))
- types_p->quick_push (TYPE_STUB_DECL (type));
- else if (TYPE_NAME (type)
- && TREE_CODE (TYPE_NAME (type)) == TYPE_DECL)
- types_p->quick_push (TYPE_NAME (type));
-
- return true;
-}
-
-/* This is a qsort callback which sorts types and declarations into a
- predictable order (types, then declarations, sorted by UID
- within). */
-
-static int
-output_types_sort (const void *pa, const void *pb)
-{
- const tree lhs = *((const tree *)pa);
- const tree rhs = *((const tree *)pb);
-
- if (TYPE_P (lhs))
- {
- if (TYPE_P (rhs))
- return TYPE_UID (lhs) - TYPE_UID (rhs);
- else
- return 1;
- }
- else
- {
- if (TYPE_P (rhs))
- return -1;
- else
- return DECL_UID (lhs) - DECL_UID (rhs);
- }
-}
-
-
-/* Force all types used by this function to be output in debug
- information. */
-
-static void
-output_used_types (void)
-{
- if (cfun && cfun->used_types_hash)
- {
- vec<tree> types;
- int i;
- tree type;
-
- types.create (cfun->used_types_hash->elements ());
- cfun->used_types_hash->traverse<vec<tree> *, output_used_types_helper>
- (&types);
-
- /* Sort by UID to prevent dependence on hash table ordering. */
- types.qsort (output_types_sort);
-
- FOR_EACH_VEC_ELT (types, i, type)
- debug_queue_symbol (type);
-
- types.release ();
- }
-}
-
-/* Output a .stabs for the symbol defined by DECL,
- which must be a ..._DECL node in the normal namespace.
- It may be a CONST_DECL, a FUNCTION_DECL, a PARM_DECL or a VAR_DECL.
- LOCAL is nonzero if the scope is less than the entire file.
- Return 1 if a stabs might have been emitted. */
-
-int
-dbxout_symbol (tree decl, int local ATTRIBUTE_UNUSED)
-{
- tree type = TREE_TYPE (decl);
- tree context = NULL_TREE;
- int result = 0;
- rtx decl_rtl;
-
- /* "Intercept" dbxout_symbol() calls like we do all debug_hooks. */
- ++debug_nesting;
-
- /* Ignore nameless syms, but don't ignore type tags. */
-
- if ((DECL_NAME (decl) == 0 && TREE_CODE (decl) != TYPE_DECL)
- || DECL_IGNORED_P (decl))
- DBXOUT_DECR_NESTING_AND_RETURN (0);
-
- /* If we are to generate only the symbols actually used then such
- symbol nodes are flagged with TREE_USED. Ignore any that
- aren't flagged as TREE_USED. */
-
- if (flag_debug_only_used_symbols
- && (!TREE_USED (decl)
- && (!VAR_P (decl) || !DECL_INITIAL (decl))))
- DBXOUT_DECR_NESTING_AND_RETURN (0);
-
- /* If dbxout_init has not yet run, queue this symbol for later. */
- if (!typevec)
- {
- preinit_symbols = tree_cons (0, decl, preinit_symbols);
- DBXOUT_DECR_NESTING_AND_RETURN (0);
- }
-
- if (flag_debug_only_used_symbols)
- {
- tree t;
-
- /* We now have a used symbol. We need to generate the info for
- the symbol's type in addition to the symbol itself. These
- type symbols are queued to be generated after were done with
- the symbol itself (otherwise they would fight over the
- stabstr obstack).
-
- Note, because the TREE_TYPE(type) might be something like a
- pointer to a named type we need to look for the first name
- we see following the TREE_TYPE chain. */
-
- t = type;
- while (POINTER_TYPE_P (t))
- t = TREE_TYPE (t);
-
- /* RECORD_TYPE, UNION_TYPE, QUAL_UNION_TYPE, and ENUMERAL_TYPE
- need special treatment. The TYPE_STUB_DECL field in these
- types generally represents the tag name type we want to
- output. In addition there could be a typedef type with
- a different name. In that case we also want to output
- that. */
-
- if (TREE_CODE (t) == RECORD_TYPE
- || TREE_CODE (t) == UNION_TYPE
- || TREE_CODE (t) == QUAL_UNION_TYPE
- || TREE_CODE (t) == ENUMERAL_TYPE)
- {
- if (TYPE_STUB_DECL (t)
- && TYPE_STUB_DECL (t) != decl
- && DECL_P (TYPE_STUB_DECL (t))
- && ! DECL_IGNORED_P (TYPE_STUB_DECL (t)))
- {
- debug_queue_symbol (TYPE_STUB_DECL (t));
- if (TYPE_NAME (t)
- && TYPE_NAME (t) != TYPE_STUB_DECL (t)
- && TYPE_NAME (t) != decl
- && DECL_P (TYPE_NAME (t)))
- debug_queue_symbol (TYPE_NAME (t));
- }
- }
- else if (TYPE_NAME (t)
- && TYPE_NAME (t) != decl
- && DECL_P (TYPE_NAME (t)))
- debug_queue_symbol (TYPE_NAME (t));
- }
-
- emit_pending_bincls_if_required ();
-
- switch (TREE_CODE (decl))
- {
- case CONST_DECL:
- /* Enum values are defined by defining the enum type. */
- break;
-
- case FUNCTION_DECL:
- decl_rtl = DECL_RTL_IF_SET (decl);
- if (!decl_rtl)
- DBXOUT_DECR_NESTING_AND_RETURN (0);
- if (DECL_EXTERNAL (decl))
- break;
- /* Don't mention a nested function under its parent. */
- context = decl_function_context (decl);
- if (context == current_function_decl)
- break;
- /* Don't mention an inline instance of a nested function. */
- if (context && DECL_FROM_INLINE (decl))
- break;
- if (!MEM_P (decl_rtl)
- || GET_CODE (XEXP (decl_rtl, 0)) != SYMBOL_REF)
- break;
-
- if (flag_debug_only_used_symbols)
- output_used_types ();
-
- dbxout_begin_complex_stabs ();
- stabstr_I (DECL_ASSEMBLER_NAME (decl));
- stabstr_S (TREE_PUBLIC (decl) ? ":F" : ":f");
- result = 1;
-
- if (TREE_TYPE (type))
- dbxout_type (TREE_TYPE (type), 0);
- else
- dbxout_type (void_type_node, 0);
-
- /* For a nested function, when that function is compiled,
- mention the containing function name
- as well as (since dbx wants it) our own assembler-name. */
- if (context != 0)
- {
- stabstr_C (',');
- stabstr_I (DECL_ASSEMBLER_NAME (decl));
- stabstr_C (',');
- stabstr_I (DECL_NAME (context));
- }
-
- dbxout_finish_complex_stabs (decl, N_FUN, XEXP (decl_rtl, 0), 0, 0);
- break;
-
- case TYPE_DECL:
- /* Don't output the same typedef twice.
- And don't output what language-specific stuff doesn't want output. */
- if (TREE_ASM_WRITTEN (decl) || TYPE_DECL_SUPPRESS_DEBUG (decl))
- DBXOUT_DECR_NESTING_AND_RETURN (0);
-
- /* Don't output typedefs for types with magic type numbers (XCOFF). */
-#ifdef DBX_ASSIGN_FUNDAMENTAL_TYPE_NUMBER
- {
- int fundamental_type_number =
- DBX_ASSIGN_FUNDAMENTAL_TYPE_NUMBER (decl);
-
- if (fundamental_type_number != 0)
- {
- TREE_ASM_WRITTEN (decl) = 1;
- TYPE_SYMTAB_ADDRESS (TREE_TYPE (decl)) = fundamental_type_number;
- DBXOUT_DECR_NESTING_AND_RETURN (0);
- }
- }
-#endif
- FORCE_TEXT;
- result = 1;
- {
- int tag_needed = 1;
- int did_output = 0;
-
- if (DECL_NAME (decl))
- {
- /* Nonzero means we must output a tag as well as a typedef. */
- tag_needed = 0;
-
- /* Handle the case of a C++ structure or union
- where the TYPE_NAME is a TYPE_DECL
- which gives both a typedef name and a tag. */
- /* dbx requires the tag first and the typedef second. */
- if ((TREE_CODE (type) == RECORD_TYPE
- || TREE_CODE (type) == UNION_TYPE
- || TREE_CODE (type) == QUAL_UNION_TYPE)
- && TYPE_NAME (type) == decl
- && !use_gnu_debug_info_extensions
- && !TREE_ASM_WRITTEN (TYPE_NAME (type))
- /* Distinguish the implicit typedefs of C++
- from explicit ones that might be found in C. */
- && DECL_ARTIFICIAL (decl)
- /* Do not generate a tag for incomplete records. */
- && COMPLETE_TYPE_P (type)
- /* Do not generate a tag for records of variable size,
- since this type cannot be properly described in the
- DBX format, and it confuses some tools such as objdump. */
- && tree_fits_uhwi_p (TYPE_SIZE (type)))
- {
- tree name = TYPE_IDENTIFIER (type);
-
- dbxout_begin_complex_stabs ();
- stabstr_I (name);
- stabstr_S (":T");
- dbxout_type (type, 1);
- dbxout_finish_complex_stabs (0, DBX_TYPE_DECL_STABS_CODE,
- 0, 0, 0);
- }
-
- dbxout_begin_complex_stabs ();
-
- /* Output leading class/struct qualifiers. */
- if (use_gnu_debug_info_extensions)
- dbxout_class_name_qualifiers (decl);
-
- /* Output typedef name. */
- stabstr_I (DECL_NAME (decl));
- stabstr_C (':');
-
- /* Short cut way to output a tag also. */
- if ((TREE_CODE (type) == RECORD_TYPE
- || TREE_CODE (type) == UNION_TYPE
- || TREE_CODE (type) == QUAL_UNION_TYPE)
- && TYPE_NAME (type) == decl
- /* Distinguish the implicit typedefs of C++
- from explicit ones that might be found in C. */
- && DECL_ARTIFICIAL (decl))
- {
- if (use_gnu_debug_info_extensions)
- {
- stabstr_C ('T');
- TREE_ASM_WRITTEN (TYPE_NAME (type)) = 1;
- }
- }
-
- stabstr_C ('t');
- dbxout_type (type, 1);
- dbxout_finish_complex_stabs (decl, DBX_TYPE_DECL_STABS_CODE,
- 0, 0, 0);
- did_output = 1;
- }
-
- /* Don't output a tag if this is an incomplete type. This prevents
- the sun4 Sun OS 4.x dbx from crashing. */
-
- if (tag_needed && TYPE_NAME (type) != 0
- && (TREE_CODE (TYPE_NAME (type)) == IDENTIFIER_NODE
- || (DECL_NAME (TYPE_NAME (type)) != 0))
- && COMPLETE_TYPE_P (type)
- && !TREE_ASM_WRITTEN (TYPE_NAME (type)))
- {
- /* For a TYPE_DECL with no name, but the type has a name,
- output a tag.
- This is what represents `struct foo' with no typedef. */
- /* In C++, the name of a type is the corresponding typedef.
- In C, it is an IDENTIFIER_NODE. */
- tree name = TYPE_IDENTIFIER (type);
-
- dbxout_begin_complex_stabs ();
- stabstr_I (name);
- stabstr_S (":T");
- dbxout_type (type, 1);
- dbxout_finish_complex_stabs (0, DBX_TYPE_DECL_STABS_CODE, 0, 0, 0);
- did_output = 1;
- }
-
- /* If an enum type has no name, it cannot be referred to, but
- we must output it anyway, to record the enumeration
- constants. */
-
- if (!did_output && TREE_CODE (type) == ENUMERAL_TYPE)
- {
- dbxout_begin_complex_stabs ();
- /* Some debuggers fail when given NULL names, so give this a
- harmless name of " " (Why not "(anon)"?). */
- stabstr_S (" :T");
- dbxout_type (type, 1);
- dbxout_finish_complex_stabs (0, DBX_TYPE_DECL_STABS_CODE, 0, 0, 0);
- }
-
- /* Prevent duplicate output of a typedef. */
- TREE_ASM_WRITTEN (decl) = 1;
- break;
- }
-
- case PARM_DECL:
- if (DECL_HAS_VALUE_EXPR_P (decl))
- decl = DECL_VALUE_EXPR (decl);
-
- /* PARM_DECLs go in their own separate chain and are output by
- dbxout_reg_parms and dbxout_parms, except for those that are
- disguised VAR_DECLs like Out parameters in Ada. */
- gcc_assert (VAR_P (decl));
-
- /* fall through */
-
- case RESULT_DECL:
- case VAR_DECL:
- /* Don't mention a variable that is external.
- Let the file that defines it describe it. */
- if (DECL_EXTERNAL (decl))
- break;
-
- /* If the variable is really a constant
- and not written in memory, inform the debugger.
-
- ??? Why do we skip emitting the type and location in this case? */
- if (TREE_STATIC (decl) && TREE_READONLY (decl)
- && DECL_INITIAL (decl) != 0
- && tree_fits_shwi_p (DECL_INITIAL (decl))
- && ! TREE_ASM_WRITTEN (decl)
- && (DECL_FILE_SCOPE_P (decl)
- || TREE_CODE (DECL_CONTEXT (decl)) == BLOCK
- || TREE_CODE (DECL_CONTEXT (decl)) == NAMESPACE_DECL)
- && TREE_PUBLIC (decl) == 0)
- {
- /* The sun4 assembler does not grok this. */
-
- if (TREE_CODE (TREE_TYPE (decl)) == INTEGER_TYPE
- || TREE_CODE (TREE_TYPE (decl)) == ENUMERAL_TYPE)
- {
- HOST_WIDE_INT ival = tree_to_shwi (DECL_INITIAL (decl));
-
- dbxout_begin_complex_stabs ();
- dbxout_symbol_name (decl, NULL, 'c');
- stabstr_S ("=i");
- stabstr_D (ival);
- dbxout_finish_complex_stabs (0, N_LSYM, 0, 0, 0);
- DBXOUT_DECR_NESTING;
- return 1;
- }
- else
- break;
- }
- /* else it is something we handle like a normal variable. */
-
- decl_rtl = dbxout_expand_expr (decl);
- if (!decl_rtl)
- DBXOUT_DECR_NESTING_AND_RETURN (0);
-
- if (!is_global_var (decl))
- decl_rtl = eliminate_regs (decl_rtl, VOIDmode, NULL_RTX);
-#ifdef LEAF_REG_REMAP
- if (crtl->uses_only_leaf_regs)
- leaf_renumber_regs_insn (decl_rtl);
-#endif
-
- result = dbxout_symbol_location (decl, type, 0, decl_rtl);
- break;
-
- default:
- break;
- }
- DBXOUT_DECR_NESTING;
- return result;
-}
-
-/* Output the stab for DECL, a VAR_DECL, RESULT_DECL or PARM_DECL.
- Add SUFFIX to its name, if SUFFIX is not 0.
- Describe the variable as residing in HOME
- (usually HOME is DECL_RTL (DECL), but not always).
- Returns 1 if the stab was really emitted. */
-
-static int
-dbxout_symbol_location (tree decl, tree type, const char *suffix, rtx home)
-{
- int letter = 0;
- stab_code_type code;
- rtx addr = 0;
- int number = 0;
- int regno = -1;
-
- /* Don't mention a variable at all
- if it was completely optimized into nothingness.
-
- If the decl was from an inline function, then its rtl
- is not identically the rtl that was used in this
- particular compilation. */
- if (GET_CODE (home) == SUBREG)
- {
- rtx value = home;
-
- while (GET_CODE (value) == SUBREG)
- value = SUBREG_REG (value);
- if (REG_P (value))
- {
- if (REGNO (value) >= FIRST_PSEUDO_REGISTER)
- return 0;
- }
- home = alter_subreg (&home, true);
- }
- if (REG_P (home))
- {
- regno = REGNO (home);
- if (regno >= FIRST_PSEUDO_REGISTER)
- return 0;
- }
-
- /* The kind-of-variable letter depends on where
- the variable is and on the scope of its name:
- G and N_GSYM for static storage and global scope,
- S for static storage and file scope,
- V for static storage and local scope,
- for those two, use N_LCSYM if data is in bss segment,
- N_STSYM if in data segment, N_FUN otherwise.
- (We used N_FUN originally, then changed to N_STSYM
- to please GDB. However, it seems that confused ld.
- Now GDB has been fixed to like N_FUN, says Kingdon.)
- no letter at all, and N_LSYM, for auto variable,
- r and N_RSYM for register variable. */
-
- if (MEM_P (home) && GET_CODE (XEXP (home, 0)) == SYMBOL_REF)
- {
- if (TREE_PUBLIC (decl))
- {
- int offs;
- letter = 'G';
- code = N_GSYM;
- if (dbxout_common_check (decl, &offs) != NULL)
- {
- letter = 'V';
- addr = 0;
- number = offs;
- }
- }
- else
- {
- addr = XEXP (home, 0);
-
- letter = decl_function_context (decl) ? 'V' : 'S';
-
- /* Some ports can transform a symbol ref into a label ref,
- because the symbol ref is too far away and has to be
- dumped into a constant pool. Alternatively, the symbol
- in the constant pool might be referenced by a different
- symbol. */
- if (GET_CODE (addr) == SYMBOL_REF
- && CONSTANT_POOL_ADDRESS_P (addr))
- {
- bool marked;
- rtx tmp = get_pool_constant_mark (addr, &marked);
-
- if (GET_CODE (tmp) == SYMBOL_REF)
- {
- addr = tmp;
- if (CONSTANT_POOL_ADDRESS_P (addr))
- get_pool_constant_mark (addr, &marked);
- else
- marked = true;
- }
- else if (GET_CODE (tmp) == LABEL_REF)
- {
- addr = tmp;
- marked = true;
- }
-
- /* If all references to the constant pool were optimized
- out, we just ignore the symbol. */
- if (!marked)
- return 0;
- }
-
- /* This should be the same condition as in assemble_variable, but
- we don't have access to dont_output_data here. So, instead,
- we rely on the fact that error_mark_node initializers always
- end up in bss for C++ and never end up in bss for C. */
- if (DECL_INITIAL (decl) == 0
- || (lang_GNU_CXX ()
- && DECL_INITIAL (decl) == error_mark_node))
- {
- int offs;
- code = N_LCSYM;
- if (dbxout_common_check (decl, &offs) != NULL)
- {
- addr = 0;
- number = offs;
- letter = 'V';
- code = N_GSYM;
- }
- }
- else if (DECL_IN_TEXT_SECTION (decl))
- /* This is not quite right, but it's the closest
- of all the codes that Unix defines. */
- code = DBX_STATIC_CONST_VAR_CODE;
- else
- {
- /* Ultrix `as' seems to need this. */
-#ifdef DBX_STATIC_STAB_DATA_SECTION
- switch_to_section (data_section);
-#endif
- code = N_STSYM;
- }
- }
- }
- else if (regno >= 0)
- {
- letter = 'r';
- code = N_RSYM;
- number = DBX_REGISTER_NUMBER (regno);
- }
- else if (MEM_P (home)
- && (MEM_P (XEXP (home, 0))
- || (REG_P (XEXP (home, 0))
- && REGNO (XEXP (home, 0)) != HARD_FRAME_POINTER_REGNUM
- && REGNO (XEXP (home, 0)) != STACK_POINTER_REGNUM
-#if !HARD_FRAME_POINTER_IS_ARG_POINTER
- && REGNO (XEXP (home, 0)) != ARG_POINTER_REGNUM
-#endif
- )))
- /* If the value is indirect by memory or by a register
- that isn't the frame pointer
- then it means the object is variable-sized and address through
- that register or stack slot. DBX has no way to represent this
- so all we can do is output the variable as a pointer.
- If it's not a parameter, ignore it. */
- {
- if (REG_P (XEXP (home, 0)))
- {
- letter = 'r';
- code = N_RSYM;
- if (REGNO (XEXP (home, 0)) >= FIRST_PSEUDO_REGISTER)
- return 0;
- number = DBX_REGISTER_NUMBER (REGNO (XEXP (home, 0)));
- }
- else
- {
- code = N_LSYM;
- /* RTL looks like (MEM (MEM (PLUS (REG...) (CONST_INT...)))).
- We want the value of that CONST_INT. */
- number = DEBUGGER_AUTO_OFFSET (XEXP (XEXP (home, 0), 0));
- }
-
- /* Effectively do build_pointer_type, but don't cache this type,
- since it might be temporary whereas the type it points to
- might have been saved for inlining. */
- /* Don't use REFERENCE_TYPE because dbx can't handle that. */
- type = make_node (POINTER_TYPE);
- TREE_TYPE (type) = TREE_TYPE (decl);
- }
- else if (MEM_P (home)
- && REG_P (XEXP (home, 0)))
- {
- code = N_LSYM;
- number = DEBUGGER_AUTO_OFFSET (XEXP (home, 0));
- }
- else if (MEM_P (home)
- && GET_CODE (XEXP (home, 0)) == PLUS
- && CONST_INT_P (XEXP (XEXP (home, 0), 1)))
- {
- code = N_LSYM;
- /* RTL looks like (MEM (PLUS (REG...) (CONST_INT...)))
- We want the value of that CONST_INT. */
- number = DEBUGGER_AUTO_OFFSET (XEXP (home, 0));
- }
- else if (MEM_P (home)
- && GET_CODE (XEXP (home, 0)) == CONST)
- {
- /* Handle an obscure case which can arise when optimizing and
- when there are few available registers. (This is *always*
- the case for i386/i486 targets). The RTL looks like
- (MEM (CONST ...)) even though this variable is a local `auto'
- or a local `register' variable. In effect, what has happened
- is that the reload pass has seen that all assignments and
- references for one such a local variable can be replaced by
- equivalent assignments and references to some static storage
- variable, thereby avoiding the need for a register. In such
- cases we're forced to lie to debuggers and tell them that
- this variable was itself `static'. */
- int offs;
- code = N_LCSYM;
- letter = 'V';
- if (dbxout_common_check (decl, &offs) == NULL)
- addr = XEXP (XEXP (home, 0), 0);
- else
- {
- addr = 0;
- number = offs;
- code = N_GSYM;
- }
- }
- else if (GET_CODE (home) == CONCAT)
- {
- tree subtype;
-
- /* If TYPE is not a COMPLEX_TYPE (it might be a RECORD_TYPE,
- for example), then there is no easy way to figure out
- what SUBTYPE should be. So, we give up. */
- if (TREE_CODE (type) != COMPLEX_TYPE)
- return 0;
-
- subtype = TREE_TYPE (type);
-
- /* If the variable's storage is in two parts,
- output each as a separate stab with a modified name. */
- if (WORDS_BIG_ENDIAN)
- dbxout_symbol_location (decl, subtype, "$imag", XEXP (home, 0));
- else
- dbxout_symbol_location (decl, subtype, "$real", XEXP (home, 0));
-
- if (WORDS_BIG_ENDIAN)
- dbxout_symbol_location (decl, subtype, "$real", XEXP (home, 1));
- else
- dbxout_symbol_location (decl, subtype, "$imag", XEXP (home, 1));
- return 1;
- }
- else
- /* Address might be a MEM, when DECL is a variable-sized object.
- Or it might be const0_rtx, meaning previous passes
- want us to ignore this variable. */
- return 0;
-
- /* Ok, start a symtab entry and output the variable name. */
- emit_pending_bincls_if_required ();
- FORCE_TEXT;
-
-#ifdef DBX_STATIC_BLOCK_START
- DBX_STATIC_BLOCK_START (asm_out_file, code);
-#endif
-
- dbxout_begin_complex_stabs_noforcetext ();
- dbxout_symbol_name (decl, suffix, letter);
- dbxout_type (type, 0);
- dbxout_finish_complex_stabs (decl, code, addr, 0, number);
-
-#ifdef DBX_STATIC_BLOCK_END
- DBX_STATIC_BLOCK_END (asm_out_file, code);
-#endif
- return 1;
-}
-
-/* Output the symbol name of DECL for a stabs, with suffix SUFFIX.
- Then output LETTER to indicate the kind of location the symbol has. */
-
-static void
-dbxout_symbol_name (tree decl, const char *suffix, int letter)
-{
- tree name;
-
- if (DECL_CONTEXT (decl)
- && (TYPE_P (DECL_CONTEXT (decl))
- || TREE_CODE (DECL_CONTEXT (decl)) == NAMESPACE_DECL))
- /* One slight hitch: if this is a VAR_DECL which is a class member
- or a namespace member, we must put out the mangled name instead of the
- DECL_NAME. Note also that static member (variable) names DO NOT begin
- with underscores in .stabs directives. */
- name = DECL_ASSEMBLER_NAME (decl);
- else
- /* ...but if we're function-local, we don't want to include the junk
- added by ASM_FORMAT_PRIVATE_NAME. */
- name = DECL_NAME (decl);
-
- if (name)
- stabstr_I (name);
- else
- stabstr_S ("(anon)");
-
- if (suffix)
- stabstr_S (suffix);
- stabstr_C (':');
- if (letter)
- stabstr_C (letter);
-}
-
-
-/* Output the common block name for DECL in a stabs.
-
- Symbols in global common (.comm) get wrapped with an N_BCOMM/N_ECOMM pair
- around each group of symbols in the same .comm area. The N_GSYM stabs
- that are emitted only contain the offset in the common area. This routine
- emits the N_BCOMM and N_ECOMM stabs. */
-
-static void
-dbxout_common_name (tree decl, const char *name, stab_code_type op)
-{
- dbxout_begin_complex_stabs ();
- stabstr_S (name);
- dbxout_finish_complex_stabs (decl, op, NULL_RTX, NULL, 0);
-}
-
-/* Check decl to determine whether it is a VAR_DECL destined for storage in a
- common area. If it is, the return value will be a non-null string giving
- the name of the common storage block it will go into. If non-null, the
- value is the offset into the common block for that symbol's storage. */
-
-static const char *
-dbxout_common_check (tree decl, int *value)
-{
- rtx home;
- rtx sym_addr;
- const char *name = NULL;
-
- /* If the decl isn't a VAR_DECL, or if it isn't static, or if
- it does not have a value (the offset into the common area), or if it
- is thread local (as opposed to global) then it isn't common, and shouldn't
- be handled as such.
-
- ??? DECL_THREAD_LOCAL_P check prevents problems with improper .stabs
- for thread-local symbols. Can be handled via same mechanism as used
- in dwarf2out.cc. */
- if (!VAR_P (decl)
- || !TREE_STATIC (decl)
- || !DECL_HAS_VALUE_EXPR_P (decl)
- || DECL_THREAD_LOCAL_P (decl)
- || !is_fortran ())
- return NULL;
-
- home = DECL_RTL (decl);
- if (home == NULL_RTX || GET_CODE (home) != MEM)
- return NULL;
-
- sym_addr = dbxout_expand_expr (DECL_VALUE_EXPR (decl));
- if (sym_addr == NULL_RTX || GET_CODE (sym_addr) != MEM)
- return NULL;
-
- sym_addr = XEXP (sym_addr, 0);
- if (GET_CODE (sym_addr) == CONST)
- sym_addr = XEXP (sym_addr, 0);
- if ((GET_CODE (sym_addr) == SYMBOL_REF || GET_CODE (sym_addr) == PLUS)
- && DECL_INITIAL (decl) == 0)
- {
-
- /* We have a sym that will go into a common area, meaning that it
- will get storage reserved with a .comm/.lcomm assembler pseudo-op.
-
- Determine name of common area this symbol will be an offset into,
- and offset into that area. Also retrieve the decl for the area
- that the symbol is offset into. */
- tree cdecl = NULL;
-
- switch (GET_CODE (sym_addr))
- {
- case PLUS:
- if (CONST_INT_P (XEXP (sym_addr, 0)))
- {
- name =
- targetm.strip_name_encoding (XSTR (XEXP (sym_addr, 1), 0));
- *value = INTVAL (XEXP (sym_addr, 0));
- cdecl = SYMBOL_REF_DECL (XEXP (sym_addr, 1));
- }
- else
- {
- name =
- targetm.strip_name_encoding (XSTR (XEXP (sym_addr, 0), 0));
- *value = INTVAL (XEXP (sym_addr, 1));
- cdecl = SYMBOL_REF_DECL (XEXP (sym_addr, 0));
- }
- break;
-
- case SYMBOL_REF:
- name = targetm.strip_name_encoding (XSTR (sym_addr, 0));
- *value = 0;
- cdecl = SYMBOL_REF_DECL (sym_addr);
- break;
-
- default:
- error ("common symbol debug info is not structured as "
- "symbol+offset");
- }
-
- /* Check area common symbol is offset into. If this is not public, then
- it is not a symbol in a common block. It must be a .lcomm symbol, not
- a .comm symbol. */
- if (cdecl == NULL || !TREE_PUBLIC (cdecl))
- name = NULL;
- }
- else
- name = NULL;
-
- return name;
-}
-
-/* Output definitions of all the decls in a chain. Return nonzero if
- anything was output */
-
-int
-dbxout_syms (tree syms)
-{
- int result = 0;
- const char *comm_prev = NULL;
- tree syms_prev = NULL;
-
- while (syms)
- {
- int temp, copen, cclos;
- const char *comm_new;
-
- /* Check for common symbol, and then progression into a new/different
- block of common symbols. Emit closing/opening common bracket if
- necessary. */
- comm_new = dbxout_common_check (syms, &temp);
- copen = comm_new != NULL
- && (comm_prev == NULL || strcmp (comm_new, comm_prev));
- cclos = comm_prev != NULL
- && (comm_new == NULL || strcmp (comm_new, comm_prev));
- if (cclos)
- dbxout_common_name (syms_prev, comm_prev, N_ECOMM);
- if (copen)
- {
- dbxout_common_name (syms, comm_new, N_BCOMM);
- syms_prev = syms;
- }
- comm_prev = comm_new;
-
- result += dbxout_symbol (syms, 1);
- syms = DECL_CHAIN (syms);
- }
-
- if (comm_prev != NULL)
- dbxout_common_name (syms_prev, comm_prev, N_ECOMM);
-
- return result;
-}
-
-/* The following two functions output definitions of function parameters.
- Each parameter gets a definition locating it in the parameter list.
- Each parameter that is a register variable gets a second definition
- locating it in the register.
-
- Printing or argument lists in gdb uses the definitions that
- locate in the parameter list. But reference to the variable in
- expressions uses preferentially the definition as a register. */
-
-/* Output definitions, referring to storage in the parmlist,
- of all the parms in PARMS, which is a chain of PARM_DECL nodes. */
-
-void
-dbxout_parms (tree parms)
-{
- ++debug_nesting;
- emit_pending_bincls_if_required ();
- fixed_size_mode rtl_mode, type_mode;
-
- for (; parms; parms = DECL_CHAIN (parms))
- if (DECL_NAME (parms)
- && TREE_TYPE (parms) != error_mark_node
- && DECL_RTL_SET_P (parms)
- && DECL_INCOMING_RTL (parms)
- /* We can't represent variable-sized types in this format. */
- && is_a <fixed_size_mode> (TYPE_MODE (TREE_TYPE (parms)), &type_mode)
- && is_a <fixed_size_mode> (GET_MODE (DECL_RTL (parms)), &rtl_mode))
- {
- tree eff_type;
- char letter;
- stab_code_type code;
- int number;
-
- /* Perform any necessary register eliminations on the parameter's rtl,
- so that the debugging output will be accurate. */
- DECL_INCOMING_RTL (parms)
- = eliminate_regs (DECL_INCOMING_RTL (parms), VOIDmode, NULL_RTX);
- SET_DECL_RTL (parms,
- eliminate_regs (DECL_RTL (parms), VOIDmode, NULL_RTX));
-#ifdef LEAF_REG_REMAP
- if (crtl->uses_only_leaf_regs)
- {
- leaf_renumber_regs_insn (DECL_INCOMING_RTL (parms));
- leaf_renumber_regs_insn (DECL_RTL (parms));
- }
-#endif
-
- if (PARM_PASSED_IN_MEMORY (parms))
- {
- rtx inrtl = XEXP (DECL_INCOMING_RTL (parms), 0);
-
- /* ??? Here we assume that the parm address is indexed
- off the frame pointer or arg pointer.
- If that is not true, we produce meaningless results,
- but do not crash. */
- if (GET_CODE (inrtl) == PLUS
- && CONST_INT_P (XEXP (inrtl, 1)))
- number = INTVAL (XEXP (inrtl, 1));
- else
- number = 0;
-
- code = N_PSYM;
- number = DEBUGGER_ARG_OFFSET (number, inrtl);
- letter = 'p';
-
- /* It is quite tempting to use TREE_TYPE (parms) instead
- of DECL_ARG_TYPE (parms) for the eff_type, so that gcc
- reports the actual type of the parameter, rather than
- the promoted type. This certainly makes GDB's life
- easier, at least for some ports. The change is a bad
- idea however, since GDB expects to be able access the
- type without performing any conversions. So for
- example, if we were passing a float to an unprototyped
- function, gcc will store a double on the stack, but if
- we emit a stab saying the type is a float, then gdb
- will only read in a single value, and this will produce
- an erroneous value. */
- eff_type = DECL_ARG_TYPE (parms);
- }
- else if (REG_P (DECL_RTL (parms)))
- {
- rtx best_rtl;
-
- /* Parm passed in registers and lives in registers or nowhere. */
- code = DBX_REGPARM_STABS_CODE;
- letter = DBX_REGPARM_STABS_LETTER;
-
- /* For parms passed in registers, it is better to use the
- declared type of the variable, not the type it arrived in. */
- eff_type = TREE_TYPE (parms);
-
- /* If parm lives in a register, use that register; pretend
- the parm was passed there. It would be more consistent
- to describe the register where the parm was passed, but
- in practice that register usually holds something else.
- If the parm lives nowhere, use the register where it
- was passed. */
- if (REGNO (DECL_RTL (parms)) < FIRST_PSEUDO_REGISTER)
- best_rtl = DECL_RTL (parms);
- else if (GET_CODE (DECL_INCOMING_RTL (parms)) == PARALLEL)
- best_rtl = XEXP (XVECEXP (DECL_INCOMING_RTL (parms), 0, 0), 0);
- else
- best_rtl = DECL_INCOMING_RTL (parms);
-
- number = DBX_REGISTER_NUMBER (REGNO (best_rtl));
- }
- else if (MEM_P (DECL_RTL (parms))
- && REG_P (XEXP (DECL_RTL (parms), 0))
- && REGNO (XEXP (DECL_RTL (parms), 0)) != HARD_FRAME_POINTER_REGNUM
- && REGNO (XEXP (DECL_RTL (parms), 0)) != STACK_POINTER_REGNUM
-#if !HARD_FRAME_POINTER_IS_ARG_POINTER
- && REGNO (XEXP (DECL_RTL (parms), 0)) != ARG_POINTER_REGNUM
-#endif
- )
- {
- /* Parm was passed via invisible reference.
- That is, its address was passed in a register.
- Output it as if it lived in that register.
- The debugger will know from the type
- that it was actually passed by invisible reference. */
-
- code = DBX_REGPARM_STABS_CODE;
-
- /* GDB likes this marked with a special letter. */
- letter = (use_gnu_debug_info_extensions
- ? 'a' : DBX_REGPARM_STABS_LETTER);
- eff_type = TREE_TYPE (parms);
-
- /* DECL_RTL looks like (MEM (REG...). Get the register number.
- If it is an unallocated pseudo-reg, then use the register where
- it was passed instead.
- ??? Why is DBX_REGISTER_NUMBER not used here? */
-
- if (REGNO (XEXP (DECL_RTL (parms), 0)) < FIRST_PSEUDO_REGISTER)
- number = REGNO (XEXP (DECL_RTL (parms), 0));
- else
- number = REGNO (DECL_INCOMING_RTL (parms));
- }
- else if (MEM_P (DECL_RTL (parms))
- && MEM_P (XEXP (DECL_RTL (parms), 0)))
- {
- /* Parm was passed via invisible reference, with the reference
- living on the stack. DECL_RTL looks like
- (MEM (MEM (PLUS (REG ...) (CONST_INT ...)))) or it
- could look like (MEM (MEM (REG))). */
-
- code = N_PSYM;
- letter = 'v';
- eff_type = TREE_TYPE (parms);
-
- if (!REG_P (XEXP (XEXP (DECL_RTL (parms), 0), 0)))
- number = INTVAL (XEXP (XEXP (XEXP (DECL_RTL (parms), 0), 0), 1));
- else
- number = 0;
-
- number = DEBUGGER_ARG_OFFSET (number,
- XEXP (XEXP (DECL_RTL (parms), 0), 0));
- }
- else if (MEM_P (DECL_RTL (parms))
- && XEXP (DECL_RTL (parms), 0) != const0_rtx
- /* ??? A constant address for a parm can happen
- when the reg it lives in is equiv to a constant in memory.
- Should make this not happen, after 2.4. */
- && ! CONSTANT_P (XEXP (DECL_RTL (parms), 0)))
- {
- /* Parm was passed in registers but lives on the stack. */
-
- code = N_PSYM;
- letter = 'p';
- eff_type = TREE_TYPE (parms);
-
- /* DECL_RTL looks like (MEM (PLUS (REG...) (CONST_INT...))),
- in which case we want the value of that CONST_INT,
- or (MEM (REG ...)),
- in which case we use a value of zero. */
- if (!REG_P (XEXP (DECL_RTL (parms), 0)))
- number = INTVAL (XEXP (XEXP (DECL_RTL (parms), 0), 1));
- else
- number = 0;
-
- /* Make a big endian correction if the mode of the type of the
- parameter is not the same as the mode of the rtl. */
- if (BYTES_BIG_ENDIAN
- && type_mode != rtl_mode
- && GET_MODE_SIZE (type_mode) < UNITS_PER_WORD)
- number += GET_MODE_SIZE (rtl_mode) - GET_MODE_SIZE (type_mode);
- }
- else
- /* ??? We don't know how to represent this argument. */
- continue;
-
- dbxout_begin_complex_stabs ();
-
- if (DECL_NAME (parms))
- {
- stabstr_I (DECL_NAME (parms));
- stabstr_C (':');
- }
- else
- stabstr_S ("(anon):");
- stabstr_C (letter);
- dbxout_type (eff_type, 0);
- dbxout_finish_complex_stabs (parms, code, 0, 0, number);
- }
- DBXOUT_DECR_NESTING;
-}
-
-/* Output definitions for the places where parms live during the function,
- when different from where they were passed, when the parms were passed
- in memory.
-
- It is not useful to do this for parms passed in registers
- that live during the function in different registers, because it is
- impossible to look in the passed register for the passed value,
- so we use the within-the-function register to begin with.
-
- PARMS is a chain of PARM_DECL nodes. */
-
-void
-dbxout_reg_parms (tree parms)
-{
- ++debug_nesting;
-
- for (; parms; parms = DECL_CHAIN (parms))
- if (DECL_NAME (parms) && PARM_PASSED_IN_MEMORY (parms))
- {
- /* Report parms that live in registers during the function
- but were passed in memory. */
- if (REG_P (DECL_RTL (parms))
- && REGNO (DECL_RTL (parms)) < FIRST_PSEUDO_REGISTER)
- dbxout_symbol_location (parms, TREE_TYPE (parms),
- 0, DECL_RTL (parms));
- else if (GET_CODE (DECL_RTL (parms)) == CONCAT)
- dbxout_symbol_location (parms, TREE_TYPE (parms),
- 0, DECL_RTL (parms));
- /* Report parms that live in memory but not where they were passed. */
- else if (MEM_P (DECL_RTL (parms))
- && ! rtx_equal_p (DECL_RTL (parms), DECL_INCOMING_RTL (parms)))
- dbxout_symbol_location (parms, TREE_TYPE (parms),
- 0, DECL_RTL (parms));
- }
- DBXOUT_DECR_NESTING;
-}
-
-/* Given a chain of ..._TYPE nodes (as come in a parameter list),
- output definitions of those names, in raw form */
-
-static void
-dbxout_args (tree args)
-{
- while (args)
- {
- stabstr_C (',');
- dbxout_type (TREE_VALUE (args), 0);
- args = TREE_CHAIN (args);
- }
-}
-
-#if defined (DBX_DEBUGGING_INFO)
-
-/* Subroutine of dbxout_block. Emit an N_LBRAC stab referencing LABEL.
- BEGIN_LABEL is the name of the beginning of the function, which may
- be required. */
-static void
-dbx_output_lbrac (const char *label,
- const char *begin_label ATTRIBUTE_UNUSED)
-{
- dbxout_begin_stabn (N_LBRAC);
- if (DBX_BLOCKS_FUNCTION_RELATIVE)
- dbxout_stab_value_label_diff (label, begin_label);
- else
- dbxout_stab_value_label (label);
-}
-
-/* Subroutine of dbxout_block. Emit an N_RBRAC stab referencing LABEL.
- BEGIN_LABEL is the name of the beginning of the function, which may
- be required. */
-static void
-dbx_output_rbrac (const char *label,
- const char *begin_label ATTRIBUTE_UNUSED)
-{
- dbxout_begin_stabn (N_RBRAC);
- if (DBX_BLOCKS_FUNCTION_RELATIVE)
- dbxout_stab_value_label_diff (label, begin_label);
- else
- dbxout_stab_value_label (label);
-}
-
-/* Return true if at least one block among BLOCK, its children or siblings
- has TREE_USED, TREE_ASM_WRITTEN and BLOCK_IN_COLD_SECTION_P
- set. If there is none, clear TREE_USED bit on such blocks. */
-
-static bool
-dbx_block_with_cold_children (tree block)
-{
- bool ret = false;
- for (; block; block = BLOCK_CHAIN (block))
- if (TREE_USED (block) && TREE_ASM_WRITTEN (block))
- {
- bool children = dbx_block_with_cold_children (BLOCK_SUBBLOCKS (block));
- if (BLOCK_IN_COLD_SECTION_P (block) || children)
- ret = true;
- else
- TREE_USED (block) = false;
- }
- return ret;
-}
-
-/* Output everything about a symbol block (a BLOCK node
- that represents a scope level),
- including recursive output of contained blocks.
-
- BLOCK is the BLOCK node.
- DEPTH is its depth within containing symbol blocks.
- ARGS is usually zero; but for the outermost block of the
- body of a function, it is a chain of PARM_DECLs for the function parameters.
- We output definitions of all the register parms
- as if they were local variables of that block.
-
- If -g1 was used, we count blocks just the same, but output nothing
- except for the outermost block.
-
- Actually, BLOCK may be several blocks chained together.
- We handle them all in sequence.
-
- Return true if we emitted any LBRAC/RBRAC. */
-
-static bool
-dbxout_block (tree block, int depth, tree args, int parent_blocknum)
-{
- bool ret = false;
- char begin_label[20];
- /* Reference current function start using LFBB. */
- ASM_GENERATE_INTERNAL_LABEL (begin_label, "LFBB", scope_labelno);
-
- /* If called for the second partition, ignore blocks that don't have
- any children in the second partition. */
- if (crtl->has_bb_partition && in_cold_section_p && depth == 0)
- dbx_block_with_cold_children (block);
-
- for (; block; block = BLOCK_CHAIN (block))
- {
- /* Ignore blocks never expanded or otherwise marked as real. */
- if (TREE_USED (block) && TREE_ASM_WRITTEN (block))
- {
- int did_output;
- int blocknum = BLOCK_NUMBER (block);
- int this_parent = parent_blocknum;
-
- /* In dbx format, the syms of a block come before the N_LBRAC.
- If nothing is output, we don't need the N_LBRAC, either. */
- did_output = 0;
- if (debug_info_level != DINFO_LEVEL_TERSE || depth == 0)
- did_output = dbxout_syms (BLOCK_VARS (block));
- if (args)
- dbxout_reg_parms (args);
-
- /* Now output an N_LBRAC symbol to represent the beginning of
- the block. Use the block's tree-walk order to generate
- the assembler symbols LBBn and LBEn
- that final will define around the code in this block. */
- if (did_output
- && BLOCK_IN_COLD_SECTION_P (block) == in_cold_section_p)
- {
- char buf[20];
- const char *scope_start;
-
- ret = true;
- if (depth == 0)
- /* The outermost block doesn't get LBB labels; use
- the LFBB local symbol emitted by dbxout_begin_prologue. */
- scope_start = begin_label;
- else
- {
- ASM_GENERATE_INTERNAL_LABEL (buf, "LBB", blocknum);
- scope_start = buf;
- this_parent = blocknum;
- }
-
- dbx_output_lbrac (scope_start, begin_label);
- }
-
- /* Output the subblocks. */
- bool children
- = dbxout_block (BLOCK_SUBBLOCKS (block), depth + 1, NULL_TREE,
- this_parent);
- ret |= children;
-
- /* Refer to the marker for the end of the block. */
- if (did_output
- && BLOCK_IN_COLD_SECTION_P (block) == in_cold_section_p)
- {
- char buf[100];
- if (depth == 0)
- /* The outermost block doesn't get LBE labels;
- use the "scope" label which will be emitted
- by dbxout_function_end. */
- ASM_GENERATE_INTERNAL_LABEL (buf, "Lscope", scope_labelno);
- else
- ASM_GENERATE_INTERNAL_LABEL (buf, "LBE", blocknum);
-
- dbx_output_rbrac (buf, begin_label);
- }
- else if (did_output && !children)
- {
- /* If we emitted any vars and didn't output any LBRAC/RBRAC,
- either at this level or any lower level, we need to emit
- an empty LBRAC/RBRAC pair now. */
- char buf[30];
- const char *scope_start;
-
- ret = true;
- if (parent_blocknum == -1)
- scope_start = begin_label;
- else
- {
- ASM_GENERATE_INTERNAL_LABEL (buf, "LBB", parent_blocknum);
- scope_start = buf;
- }
-
- dbx_output_lbrac (scope_start, begin_label);
- dbx_output_rbrac (scope_start, begin_label);
- }
- }
- }
- return ret;
-}
-
-/* Output the information about a function and its arguments and result.
- Usually this follows the function's code,
- but on some systems, it comes before. */
-
-static void
-dbxout_begin_function (tree decl)
-{
- int saved_tree_used1;
-
- saved_tree_used1 = TREE_USED (decl);
- TREE_USED (decl) = 1;
- if (DECL_NAME (DECL_RESULT (decl)) != 0)
- {
- int saved_tree_used2 = TREE_USED (DECL_RESULT (decl));
- TREE_USED (DECL_RESULT (decl)) = 1;
- dbxout_symbol (decl, 0);
- TREE_USED (DECL_RESULT (decl)) = saved_tree_used2;
- }
- else
- dbxout_symbol (decl, 0);
- TREE_USED (decl) = saved_tree_used1;
-
- dbxout_parms (DECL_ARGUMENTS (decl));
- if (DECL_NAME (DECL_RESULT (decl)) != 0)
- dbxout_symbol (DECL_RESULT (decl), 1);
-}
-#endif /* DBX_DEBUGGING_INFO */
-
-#endif /* DBX_DEBUGGING_INFO || XCOFF_DEBUGGING_INFO */
-
-/* Record an element in the table of global destructors. SYMBOL is
- a SYMBOL_REF of the function to be called; PRIORITY is a number
- between 0 and MAX_INIT_PRIORITY. */
-
-void
-default_stabs_asm_out_destructor (rtx symbol ATTRIBUTE_UNUSED,
- int priority ATTRIBUTE_UNUSED)
-{
-#if defined DBX_DEBUGGING_INFO || defined XCOFF_DEBUGGING_INFO
- /* Tell GNU LD that this is part of the static destructor set.
- This will work for any system that uses stabs, most usefully
- aout systems. */
- dbxout_begin_simple_stabs ("___DTOR_LIST__", 22 /* N_SETT */);
- dbxout_stab_value_label (XSTR (symbol, 0));
-#else
- sorry ("global destructors not supported on this target");
-#endif
-}
-
-/* Likewise for global constructors. */
-
-void
-default_stabs_asm_out_constructor (rtx symbol ATTRIBUTE_UNUSED,
- int priority ATTRIBUTE_UNUSED)
-{
-#if defined DBX_DEBUGGING_INFO || defined XCOFF_DEBUGGING_INFO
- /* Tell GNU LD that this is part of the static destructor set.
- This will work for any system that uses stabs, most usefully
- aout systems. */
- dbxout_begin_simple_stabs ("___CTOR_LIST__", 22 /* N_SETT */);
- dbxout_stab_value_label (XSTR (symbol, 0));
-#else
- sorry ("global constructors not supported on this target");
-#endif
-}
-
-#include "gt-dbxout.h"
deleted file mode 100644
@@ -1,60 +0,0 @@
-/* dbxout.h - Various declarations for functions found in dbxout.cc
- Copyright (C) 1998-2022 Free Software Foundation, Inc.
-
-This file is part of GCC.
-
-GCC is free software; you can redistribute it and/or modify it under
-the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 3, or (at your option) any later
-version.
-
-GCC is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-for more details.
-
-You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING3. If not see
-<http://www.gnu.org/licenses/>. */
-
-#ifndef GCC_DBXOUT_H
-#define GCC_DBXOUT_H
-
-extern int dbxout_symbol (tree, int);
-extern void dbxout_parms (tree);
-extern void dbxout_reg_parms (tree);
-extern int dbxout_syms (tree);
-
-extern void default_stabs_asm_out_destructor (rtx, int);
-extern void default_stabs_asm_out_constructor (rtx, int);
-
-/* dbxout helper functions */
-#if defined DBX_DEBUGGING_INFO || defined XCOFF_DEBUGGING_INFO
-
-extern void dbxout_int (int);
-extern void dbxout_stabd (int, int);
-extern void dbxout_begin_stabn (int);
-extern void dbxout_begin_stabn_sline (int);
-extern void dbxout_begin_empty_stabs (int);
-extern void dbxout_begin_simple_stabs (const char *, int);
-extern void dbxout_begin_simple_stabs_desc (const char *, int, int);
-
-extern void dbxout_stab_value_zero (void);
-extern void dbxout_stab_value_label (const char *);
-extern void dbxout_stab_value_label_diff (const char *, const char *);
-extern void dbxout_stab_value_internal_label (const char *, int *);
-extern void dbxout_stab_value_internal_label_diff (const char *, int *,
- const char *);
-#endif
-
-/* Language description for N_SO stabs. */
-#define N_SO_AS 1
-#define N_SO_C 2
-#define N_SO_ANSI_C 3
-#define N_SO_CC 4 /* c++*/
-#define N_SO_FORTRAN 5
-#define N_SO_FORTRAN90 7
-#define N_SO_OBJC 50
-#define N_SO_OBJCPLUS 51
-
-#endif /* GCC_DBXOUT_H */
@@ -238,7 +238,6 @@ extern void debug_nothing_tree_charstar_uhwi (tree, const char *,
/* Hooks for various debug formats. */
extern const struct gcc_debug_hooks do_nothing_debug_hooks;
-extern const struct gcc_debug_hooks dbx_debug_hooks;
extern const struct gcc_debug_hooks xcoff_debug_hooks;
extern const struct gcc_debug_hooks dwarf2_debug_hooks;
extern const struct gcc_debug_hooks dwarf2_lineno_debug_hooks;
@@ -3913,8 +3913,7 @@ on FreeBSD 7 or later) and the use of @code{__cxa_atexit} by default
by GCC 4.5 and above.
We support FreeBSD using the ELF file format with DWARF 2 debugging
-for all CPU architectures. You may use @option{-gstabs} instead of
-@option{-g}, if you really want the old debugging format. There are
+for all CPU architectures. There are
no known issues with mixing object files and libraries with different
debugging formats. Otherwise, this release of GCC should now match
more of the configuration used in the stock FreeBSD configuration of
@@ -45,7 +45,7 @@ remainder. @command{g++} accepts mostly the same options as @command{gcc}.
@c man end
@c man begin SEEALSO
gpl(7), gfdl(7), fsf-funding(7),
-cpp(1), gcov(1), as(1), ld(1), gdb(1), dbx(1)
+cpp(1), gcov(1), as(1), ld(1), gdb(1)
and the Info entries for @file{gcc}, @file{cpp}, @file{as},
@file{ld}, @file{binutils} and @file{gdb}.
@c man end
@@ -496,7 +496,7 @@ Objective-C and Objective-C++ Dialects}.
@gccoptlist{-g -g@var{level} -gdwarf -gdwarf-@var{version} @gol
-gbtf -gctf -gctf@var{level} @gol
-ggdb -grecord-gcc-switches -gno-record-gcc-switches @gol
--gstabs -gstabs+ -gstrict-dwarf -gno-strict-dwarf @gol
+-gstrict-dwarf -gno-strict-dwarf @gol
-gas-loc-support -gno-as-loc-support @gol
-gas-locview-support -gno-as-locview-support @gol
-gcolumn-info -gno-column-info -gdwarf32 -gdwarf64 @gol
@@ -504,7 +504,7 @@ Objective-C and Objective-C++ Dialects}.
-gvariable-location-views -gno-variable-location-views @gol
-ginternal-reset-location-views -gno-internal-reset-location-views @gol
-ginline-points -gno-inline-points @gol
--gvms -gxcoff -gxcoff+ -gz@r{[}=@var{type}@r{]} @gol
+-gvms -gz@r{[}=@var{type}@r{]} @gol
-gsplit-dwarf -gdescribe-dies -gno-describe-dies @gol
-fdebug-prefix-map=@var{old}=@var{new} -fdebug-types-section @gol
-fno-eliminate-unused-debug-types @gol
@@ -10700,10 +10700,8 @@ information.
On most systems that use stabs format, @option{-g} enables use of extra
debugging information that only GDB can use; this extra information
makes debugging work better in GDB but probably makes other debuggers
-crash or
-refuse to read the program. If you want to control for certain whether
-to generate the extra information, use @option{-gstabs+}, @option{-gstabs},
-@option{-gxcoff+}, @option{-gxcoff}, or @option{-gvms} (see below).
+crash or refuse to read the program. If you want to control for certain whether
+to generate the extra information, use @option{-gvms} (see below).
@item -ggdb
@opindex ggdb
@@ -10760,34 +10758,6 @@ information, but does not include type information.
Level 2 produces type information for entities (functions, data objects etc.)
at file-scope or global-scope only.
-@item -gstabs
-@opindex gstabs
-Produce debugging information in stabs format (if that is supported),
-without GDB extensions. This is the format used by DBX on most BSD
-systems. On MIPS, Alpha and System V Release 4 systems this option
-produces stabs debugging output that is not understood by DBX@.
-On System V Release 4 systems this option requires the GNU assembler.
-
-@item -gstabs+
-@opindex gstabs+
-Produce debugging information in stabs format (if that is supported),
-using GNU extensions understood only by the GNU debugger (GDB)@. The
-use of these extensions is likely to make other debuggers crash or
-refuse to read the program.
-
-@item -gxcoff
-@opindex gxcoff
-Produce debugging information in XCOFF format (if that is supported).
-This is the format used by the DBX debugger on IBM RS/6000 systems.
-
-@item -gxcoff+
-@opindex gxcoff+
-Produce debugging information in XCOFF format (if that is supported),
-using GNU extensions understood only by the GNU debugger (GDB)@. The
-use of these extensions is likely to make other debuggers crash or
-refuse to read the program, and may cause assemblers other than the GNU
-assembler (GAS) to fail with an error.
-
@item -gvms
@opindex gvms
Produce debugging information in Alpha/VMS debug format (if that is
@@ -10795,8 +10765,6 @@ supported). This is the format used by DEBUG on Alpha/VMS systems.
@item -g@var{level}
@itemx -ggdb@var{level}
-@itemx -gstabs@var{level}
-@itemx -gxcoff@var{level}
@itemx -gvms@var{level}
Request debugging information and also use @var{level} to specify how
much information. The default level is 2.
@@ -1184,7 +1184,7 @@ these files.
This is run after final because it must output the stack slot offsets
for pseudo registers that did not get hard registers. Source files
-are @file{dbxout.cc} for DBX symbol table format, @file{dwarfout.c} for
+are @file{dwarfout.c} for
DWARF symbol table format, files @file{dwarf2out.cc} and @file{dwarf2asm.cc}
for DWARF2 symbol table format, and @file{vmsdbgout.cc} for VMS debug
symbol table format.
@@ -9919,9 +9919,6 @@ This describes how to specify debugging information.
@menu
* All Debuggers:: Macros that affect all debugging formats uniformly.
-* DBX Options:: Macros enabling specific options in DBX format.
-* DBX Hooks:: Hook macros for varying DBX format.
-* File Names and DBX:: Macros controlling output of file names in DBX format.
* DWARF:: Macros for DWARF format.
* VMS Debug:: Macros for VMS debug format.
* CTF Debug:: Macros for CTF debug format.
@@ -9972,35 +9969,18 @@ having address @var{x} (an RTL expression). The nominal offset is
A C expression that returns the type of debugging output GCC should
produce when the user specifies just @option{-g}. Define
this if you have arranged for GCC to support more than one format of
-debugging output. Currently, the allowable values are @code{DBX_DEBUG},
-@code{DWARF2_DEBUG}, @code{XCOFF_DEBUG}, @code{VMS_DEBUG},
+debugging output. Currently, the allowable values are
+@code{DWARF2_DEBUG}, @code{VMS_DEBUG},
and @code{VMS_AND_DWARF2_DEBUG}.
When the user specifies @option{-ggdb}, GCC normally also uses the
value of this macro to select the debugging output format, but with two
exceptions. If @code{DWARF2_DEBUGGING_INFO} is defined, GCC uses the
-value @code{DWARF2_DEBUG}. Otherwise, if @code{DBX_DEBUGGING_INFO} is
-defined, GCC uses @code{DBX_DEBUG}.
+value @code{DWARF2_DEBUG}.
The value of this macro only affects the default debugging output; the
-user can always get a specific type of output by using @option{-gstabs},
-@option{-gdwarf-2}, @option{-gxcoff}, or @option{-gvms}.
-@end defmac
-
-@node DBX Options
-@subsection Specific Options for DBX Output
-
-@c prevent bad page break with this line
-These are specific options for DBX output.
-
-@defmac DBX_DEBUGGING_INFO
-Define this macro if GCC should produce debugging output for DBX
-in response to the @option{-g} option.
-@end defmac
-
-@defmac XCOFF_DEBUGGING_INFO
-Define this macro if GCC should produce XCOFF format debugging output
-in response to the @option{-g} option. This is a variant of DBX format.
+user can always get a specific type of output by using @option{-gdwarf-2},
+or @option{-gvms}.
@end defmac
@defmac DEFAULT_GDB_EXTENSIONS
@@ -10011,196 +9991,6 @@ macro, the default is 1: always generate the extended information
if there is any occasion to.
@end defmac
-@defmac DEBUG_SYMS_TEXT
-Define this macro if all @code{.stabs} commands should be output while
-in the text section.
-@end defmac
-
-@defmac ASM_STABS_OP
-A C string constant, including spacing, naming the assembler pseudo op to
-use instead of @code{"\t.stabs\t"} to define an ordinary debugging symbol.
-If you don't define this macro, @code{"\t.stabs\t"} is used. This macro
-applies only to DBX debugging information format.
-@end defmac
-
-@defmac ASM_STABD_OP
-A C string constant, including spacing, naming the assembler pseudo op to
-use instead of @code{"\t.stabd\t"} to define a debugging symbol whose
-value is the current location. If you don't define this macro,
-@code{"\t.stabd\t"} is used. This macro applies only to DBX debugging
-information format.
-@end defmac
-
-@defmac ASM_STABN_OP
-A C string constant, including spacing, naming the assembler pseudo op to
-use instead of @code{"\t.stabn\t"} to define a debugging symbol with no
-name. If you don't define this macro, @code{"\t.stabn\t"} is used. This
-macro applies only to DBX debugging information format.
-@end defmac
-
-@defmac DBX_NO_XREFS
-Define this macro if DBX on your system does not support the construct
-@samp{xs@var{tagname}}. On some systems, this construct is used to
-describe a forward reference to a structure named @var{tagname}.
-On other systems, this construct is not supported at all.
-@end defmac
-
-@defmac DBX_CONTIN_LENGTH
-A symbol name in DBX-format debugging information is normally
-continued (split into two separate @code{.stabs} directives) when it
-exceeds a certain length (by default, 80 characters). On some
-operating systems, DBX requires this splitting; on others, splitting
-must not be done. You can inhibit splitting by defining this macro
-with the value zero. You can override the default splitting-length by
-defining this macro as an expression for the length you desire.
-@end defmac
-
-@defmac DBX_CONTIN_CHAR
-Normally continuation is indicated by adding a @samp{\} character to
-the end of a @code{.stabs} string when a continuation follows. To use
-a different character instead, define this macro as a character
-constant for the character you want to use. Do not define this macro
-if backslash is correct for your system.
-@end defmac
-
-@defmac DBX_STATIC_STAB_DATA_SECTION
-Define this macro if it is necessary to go to the data section before
-outputting the @samp{.stabs} pseudo-op for a non-global static
-variable.
-@end defmac
-
-@defmac DBX_TYPE_DECL_STABS_CODE
-The value to use in the ``code'' field of the @code{.stabs} directive
-for a typedef. The default is @code{N_LSYM}.
-@end defmac
-
-@defmac DBX_STATIC_CONST_VAR_CODE
-The value to use in the ``code'' field of the @code{.stabs} directive
-for a static variable located in the text section. DBX format does not
-provide any ``right'' way to do this. The default is @code{N_FUN}.
-@end defmac
-
-@defmac DBX_REGPARM_STABS_CODE
-The value to use in the ``code'' field of the @code{.stabs} directive
-for a parameter passed in registers. DBX format does not provide any
-``right'' way to do this. The default is @code{N_RSYM}.
-@end defmac
-
-@defmac DBX_REGPARM_STABS_LETTER
-The letter to use in DBX symbol data to identify a symbol as a parameter
-passed in registers. DBX format does not customarily provide any way to
-do this. The default is @code{'P'}.
-@end defmac
-
-@defmac DBX_FUNCTION_FIRST
-Define this macro if the DBX information for a function and its
-arguments should precede the assembler code for the function. Normally,
-in DBX format, the debugging information entirely follows the assembler
-code.
-@end defmac
-
-@defmac DBX_BLOCKS_FUNCTION_RELATIVE
-Define this macro, with value 1, if the value of a symbol describing
-the scope of a block (@code{N_LBRAC} or @code{N_RBRAC}) should be
-relative to the start of the enclosing function. Normally, GCC uses
-an absolute address.
-@end defmac
-
-@defmac DBX_LINES_FUNCTION_RELATIVE
-Define this macro, with value 1, if the value of a symbol indicating
-the current line number (@code{N_SLINE}) should be relative to the
-start of the enclosing function. Normally, GCC uses an absolute address.
-@end defmac
-
-@defmac DBX_USE_BINCL
-Define this macro if GCC should generate @code{N_BINCL} and
-@code{N_EINCL} stabs for included header files, as on Sun systems. This
-macro also directs GCC to output a type number as a pair of a file
-number and a type number within the file. Normally, GCC does not
-generate @code{N_BINCL} or @code{N_EINCL} stabs, and it outputs a single
-number for a type number.
-@end defmac
-
-@node DBX Hooks
-@subsection Open-Ended Hooks for DBX Format
-
-@c prevent bad page break with this line
-These are hooks for DBX format.
-
-@defmac DBX_OUTPUT_SOURCE_LINE (@var{stream}, @var{line}, @var{counter})
-A C statement to output DBX debugging information before code for line
-number @var{line} of the current source file to the stdio stream
-@var{stream}. @var{counter} is the number of time the macro was
-invoked, including the current invocation; it is intended to generate
-unique labels in the assembly output.
-
-This macro should not be defined if the default output is correct, or
-if it can be made correct by defining @code{DBX_LINES_FUNCTION_RELATIVE}.
-@end defmac
-
-@defmac NO_DBX_FUNCTION_END
-Some stabs encapsulation formats (in particular ECOFF), cannot handle the
-@code{.stabs "",N_FUN,,0,0,Lscope-function-1} gdb dbx extension construct.
-On those machines, define this macro to turn this feature off without
-disturbing the rest of the gdb extensions.
-@end defmac
-
-@defmac NO_DBX_BNSYM_ENSYM
-Some assemblers cannot handle the @code{.stabd BNSYM/ENSYM,0,0} gdb dbx
-extension construct. On those machines, define this macro to turn this
-feature off without disturbing the rest of the gdb extensions.
-@end defmac
-
-@node File Names and DBX
-@subsection File Names in DBX Format
-
-@c prevent bad page break with this line
-This describes file names in DBX format.
-
-@defmac DBX_OUTPUT_MAIN_SOURCE_FILENAME (@var{stream}, @var{name})
-A C statement to output DBX debugging information to the stdio stream
-@var{stream}, which indicates that file @var{name} is the main source
-file---the file specified as the input file for compilation.
-This macro is called only once, at the beginning of compilation.
-
-This macro need not be defined if the standard form of output
-for DBX debugging information is appropriate.
-
-It may be necessary to refer to a label equal to the beginning of the
-text section. You can use @samp{assemble_name (stream, ltext_label_name)}
-to do so. If you do this, you must also set the variable
-@var{used_ltext_label_name} to @code{true}.
-@end defmac
-
-@defmac NO_DBX_MAIN_SOURCE_DIRECTORY
-Define this macro, with value 1, if GCC should not emit an indication
-of the current directory for compilation and current source language at
-the beginning of the file.
-@end defmac
-
-@defmac NO_DBX_GCC_MARKER
-Define this macro, with value 1, if GCC should not emit an indication
-that this object file was compiled by GCC@. The default is to emit
-an @code{N_OPT} stab at the beginning of every source file, with
-@samp{gcc2_compiled.} for the string and value 0.
-@end defmac
-
-@defmac DBX_OUTPUT_MAIN_SOURCE_FILE_END (@var{stream}, @var{name})
-A C statement to output DBX debugging information at the end of
-compilation of the main source file @var{name}. Output should be
-written to the stdio stream @var{stream}.
-
-If you don't define this macro, nothing special is output at the end
-of compilation, which is correct for most machines.
-@end defmac
-
-@defmac DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
-Define this macro @emph{instead of} defining
-@code{DBX_OUTPUT_MAIN_SOURCE_FILE_END}, if what needs to be output at
-the end of compilation is an @code{N_SO} stab with an empty string,
-whose value is the highest absolute text address in the file.
-@end defmac
-
@need 2000
@node DWARF
@subsection Macros for DWARF Output
@@ -6603,9 +6603,6 @@ This describes how to specify debugging information.
@menu
* All Debuggers:: Macros that affect all debugging formats uniformly.
-* DBX Options:: Macros enabling specific options in DBX format.
-* DBX Hooks:: Hook macros for varying DBX format.
-* File Names and DBX:: Macros controlling output of file names in DBX format.
* DWARF:: Macros for DWARF format.
* VMS Debug:: Macros for VMS debug format.
* CTF Debug:: Macros for CTF debug format.
@@ -6656,35 +6653,18 @@ having address @var{x} (an RTL expression). The nominal offset is
A C expression that returns the type of debugging output GCC should
produce when the user specifies just @option{-g}. Define
this if you have arranged for GCC to support more than one format of
-debugging output. Currently, the allowable values are @code{DBX_DEBUG},
-@code{DWARF2_DEBUG}, @code{XCOFF_DEBUG}, @code{VMS_DEBUG},
+debugging output. Currently, the allowable values are
+@code{DWARF2_DEBUG}, @code{VMS_DEBUG},
and @code{VMS_AND_DWARF2_DEBUG}.
When the user specifies @option{-ggdb}, GCC normally also uses the
value of this macro to select the debugging output format, but with two
exceptions. If @code{DWARF2_DEBUGGING_INFO} is defined, GCC uses the
-value @code{DWARF2_DEBUG}. Otherwise, if @code{DBX_DEBUGGING_INFO} is
-defined, GCC uses @code{DBX_DEBUG}.
+value @code{DWARF2_DEBUG}.
The value of this macro only affects the default debugging output; the
-user can always get a specific type of output by using @option{-gstabs},
-@option{-gdwarf-2}, @option{-gxcoff}, or @option{-gvms}.
-@end defmac
-
-@node DBX Options
-@subsection Specific Options for DBX Output
-
-@c prevent bad page break with this line
-These are specific options for DBX output.
-
-@defmac DBX_DEBUGGING_INFO
-Define this macro if GCC should produce debugging output for DBX
-in response to the @option{-g} option.
-@end defmac
-
-@defmac XCOFF_DEBUGGING_INFO
-Define this macro if GCC should produce XCOFF format debugging output
-in response to the @option{-g} option. This is a variant of DBX format.
+user can always get a specific type of output by using @option{-gdwarf-2},
+or @option{-gvms}.
@end defmac
@defmac DEFAULT_GDB_EXTENSIONS
@@ -6695,196 +6675,6 @@ macro, the default is 1: always generate the extended information
if there is any occasion to.
@end defmac
-@defmac DEBUG_SYMS_TEXT
-Define this macro if all @code{.stabs} commands should be output while
-in the text section.
-@end defmac
-
-@defmac ASM_STABS_OP
-A C string constant, including spacing, naming the assembler pseudo op to
-use instead of @code{"\t.stabs\t"} to define an ordinary debugging symbol.
-If you don't define this macro, @code{"\t.stabs\t"} is used. This macro
-applies only to DBX debugging information format.
-@end defmac
-
-@defmac ASM_STABD_OP
-A C string constant, including spacing, naming the assembler pseudo op to
-use instead of @code{"\t.stabd\t"} to define a debugging symbol whose
-value is the current location. If you don't define this macro,
-@code{"\t.stabd\t"} is used. This macro applies only to DBX debugging
-information format.
-@end defmac
-
-@defmac ASM_STABN_OP
-A C string constant, including spacing, naming the assembler pseudo op to
-use instead of @code{"\t.stabn\t"} to define a debugging symbol with no
-name. If you don't define this macro, @code{"\t.stabn\t"} is used. This
-macro applies only to DBX debugging information format.
-@end defmac
-
-@defmac DBX_NO_XREFS
-Define this macro if DBX on your system does not support the construct
-@samp{xs@var{tagname}}. On some systems, this construct is used to
-describe a forward reference to a structure named @var{tagname}.
-On other systems, this construct is not supported at all.
-@end defmac
-
-@defmac DBX_CONTIN_LENGTH
-A symbol name in DBX-format debugging information is normally
-continued (split into two separate @code{.stabs} directives) when it
-exceeds a certain length (by default, 80 characters). On some
-operating systems, DBX requires this splitting; on others, splitting
-must not be done. You can inhibit splitting by defining this macro
-with the value zero. You can override the default splitting-length by
-defining this macro as an expression for the length you desire.
-@end defmac
-
-@defmac DBX_CONTIN_CHAR
-Normally continuation is indicated by adding a @samp{\} character to
-the end of a @code{.stabs} string when a continuation follows. To use
-a different character instead, define this macro as a character
-constant for the character you want to use. Do not define this macro
-if backslash is correct for your system.
-@end defmac
-
-@defmac DBX_STATIC_STAB_DATA_SECTION
-Define this macro if it is necessary to go to the data section before
-outputting the @samp{.stabs} pseudo-op for a non-global static
-variable.
-@end defmac
-
-@defmac DBX_TYPE_DECL_STABS_CODE
-The value to use in the ``code'' field of the @code{.stabs} directive
-for a typedef. The default is @code{N_LSYM}.
-@end defmac
-
-@defmac DBX_STATIC_CONST_VAR_CODE
-The value to use in the ``code'' field of the @code{.stabs} directive
-for a static variable located in the text section. DBX format does not
-provide any ``right'' way to do this. The default is @code{N_FUN}.
-@end defmac
-
-@defmac DBX_REGPARM_STABS_CODE
-The value to use in the ``code'' field of the @code{.stabs} directive
-for a parameter passed in registers. DBX format does not provide any
-``right'' way to do this. The default is @code{N_RSYM}.
-@end defmac
-
-@defmac DBX_REGPARM_STABS_LETTER
-The letter to use in DBX symbol data to identify a symbol as a parameter
-passed in registers. DBX format does not customarily provide any way to
-do this. The default is @code{'P'}.
-@end defmac
-
-@defmac DBX_FUNCTION_FIRST
-Define this macro if the DBX information for a function and its
-arguments should precede the assembler code for the function. Normally,
-in DBX format, the debugging information entirely follows the assembler
-code.
-@end defmac
-
-@defmac DBX_BLOCKS_FUNCTION_RELATIVE
-Define this macro, with value 1, if the value of a symbol describing
-the scope of a block (@code{N_LBRAC} or @code{N_RBRAC}) should be
-relative to the start of the enclosing function. Normally, GCC uses
-an absolute address.
-@end defmac
-
-@defmac DBX_LINES_FUNCTION_RELATIVE
-Define this macro, with value 1, if the value of a symbol indicating
-the current line number (@code{N_SLINE}) should be relative to the
-start of the enclosing function. Normally, GCC uses an absolute address.
-@end defmac
-
-@defmac DBX_USE_BINCL
-Define this macro if GCC should generate @code{N_BINCL} and
-@code{N_EINCL} stabs for included header files, as on Sun systems. This
-macro also directs GCC to output a type number as a pair of a file
-number and a type number within the file. Normally, GCC does not
-generate @code{N_BINCL} or @code{N_EINCL} stabs, and it outputs a single
-number for a type number.
-@end defmac
-
-@node DBX Hooks
-@subsection Open-Ended Hooks for DBX Format
-
-@c prevent bad page break with this line
-These are hooks for DBX format.
-
-@defmac DBX_OUTPUT_SOURCE_LINE (@var{stream}, @var{line}, @var{counter})
-A C statement to output DBX debugging information before code for line
-number @var{line} of the current source file to the stdio stream
-@var{stream}. @var{counter} is the number of time the macro was
-invoked, including the current invocation; it is intended to generate
-unique labels in the assembly output.
-
-This macro should not be defined if the default output is correct, or
-if it can be made correct by defining @code{DBX_LINES_FUNCTION_RELATIVE}.
-@end defmac
-
-@defmac NO_DBX_FUNCTION_END
-Some stabs encapsulation formats (in particular ECOFF), cannot handle the
-@code{.stabs "",N_FUN,,0,0,Lscope-function-1} gdb dbx extension construct.
-On those machines, define this macro to turn this feature off without
-disturbing the rest of the gdb extensions.
-@end defmac
-
-@defmac NO_DBX_BNSYM_ENSYM
-Some assemblers cannot handle the @code{.stabd BNSYM/ENSYM,0,0} gdb dbx
-extension construct. On those machines, define this macro to turn this
-feature off without disturbing the rest of the gdb extensions.
-@end defmac
-
-@node File Names and DBX
-@subsection File Names in DBX Format
-
-@c prevent bad page break with this line
-This describes file names in DBX format.
-
-@defmac DBX_OUTPUT_MAIN_SOURCE_FILENAME (@var{stream}, @var{name})
-A C statement to output DBX debugging information to the stdio stream
-@var{stream}, which indicates that file @var{name} is the main source
-file---the file specified as the input file for compilation.
-This macro is called only once, at the beginning of compilation.
-
-This macro need not be defined if the standard form of output
-for DBX debugging information is appropriate.
-
-It may be necessary to refer to a label equal to the beginning of the
-text section. You can use @samp{assemble_name (stream, ltext_label_name)}
-to do so. If you do this, you must also set the variable
-@var{used_ltext_label_name} to @code{true}.
-@end defmac
-
-@defmac NO_DBX_MAIN_SOURCE_DIRECTORY
-Define this macro, with value 1, if GCC should not emit an indication
-of the current directory for compilation and current source language at
-the beginning of the file.
-@end defmac
-
-@defmac NO_DBX_GCC_MARKER
-Define this macro, with value 1, if GCC should not emit an indication
-that this object file was compiled by GCC@. The default is to emit
-an @code{N_OPT} stab at the beginning of every source file, with
-@samp{gcc2_compiled.} for the string and value 0.
-@end defmac
-
-@defmac DBX_OUTPUT_MAIN_SOURCE_FILE_END (@var{stream}, @var{name})
-A C statement to output DBX debugging information at the end of
-compilation of the main source file @var{name}. Output should be
-written to the stdio stream @var{stream}.
-
-If you don't define this macro, nothing special is output at the end
-of compilation, which is correct for most machines.
-@end defmac
-
-@defmac DBX_OUTPUT_NULL_N_SO_AT_MAIN_SOURCE_FILE_END
-Define this macro @emph{instead of} defining
-@code{DBX_OUTPUT_MAIN_SOURCE_FILE_END}, if what needs to be output at
-the end of compilation is an @code{N_SO} stab with an empty string,
-whose value is the highest absolute text address in the file.
-@end defmac
-
@need 2000
@node DWARF
@subsection Macros for DWARF Output
@@ -35,10 +35,6 @@ along with GCC; see the file COPYING3. If not see
#include "emit-rtl.h"
#include "fold-const.h"
-#ifndef XCOFF_DEBUGGING_INFO
-#define XCOFF_DEBUGGING_INFO 0
-#endif
-
/* Output an unaligned integer with the given value and size. Prefer not
to print a newline, since the caller may want to add a comment. */
@@ -384,16 +380,13 @@ dw2_asm_output_nstring (const char *str, size_t orig_len,
if (flag_debug_asm && comment)
{
- if (XCOFF_DEBUGGING_INFO)
- fputs ("\t.byte \"", asm_out_file);
- else
- fputs ("\t.ascii \"", asm_out_file);
+ fputs ("\t.ascii \"", asm_out_file);
for (i = 0; i < len; i++)
{
int c = str[i];
if (c == '\"')
- fputc (XCOFF_DEBUGGING_INFO ? '\"' : '\\', asm_out_file);
+ fputc ('\\', asm_out_file);
else if (c == '\\')
fputc ('\\', asm_out_file);
if (ISPRINT (c))
@@ -913,7 +906,7 @@ static GTY(()) hash_map<const char *, tree> *indirect_pool;
static GTY(()) int dw2_const_labelno;
#if defined(HAVE_GAS_HIDDEN)
-# define USE_LINKONCE_INDIRECT (SUPPORTS_ONE_ONLY && !XCOFF_DEBUGGING_INFO)
+# define USE_LINKONCE_INDIRECT (SUPPORTS_ONE_ONLY)
#else
# define USE_LINKONCE_INDIRECT 0
#endif
@@ -105,14 +105,6 @@ static rtx_insn *cached_next_real_insn;
static void dwarf2out_decl (tree);
static bool is_redundant_typedef (const_tree);
-#ifndef XCOFF_DEBUGGING_INFO
-#define XCOFF_DEBUGGING_INFO 0
-#endif
-
-#ifndef HAVE_XCOFF_DWARF_EXTRAS
-#define HAVE_XCOFF_DWARF_EXTRAS 0
-#endif
-
#ifdef VMS_DEBUGGING_INFO
int vms_file_stats_name (const char *, long long *, long *, char *, int *);
@@ -608,14 +600,11 @@ output_fde (dw_fde_ref fde, bool for_eh, bool second,
for_eh + j);
ASM_GENERATE_INTERNAL_LABEL (l1, FDE_AFTER_SIZE_LABEL, for_eh + j);
ASM_GENERATE_INTERNAL_LABEL (l2, FDE_END_LABEL, for_eh + j);
- if (!XCOFF_DEBUGGING_INFO || for_eh)
- {
- if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4 && !for_eh)
- dw2_asm_output_data (4, 0xffffffff, "Initial length escape value"
- " indicating 64-bit DWARF extension");
- dw2_asm_output_delta (for_eh ? 4 : dwarf_offset_size, l2, l1,
- "FDE Length");
- }
+ if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4 && !for_eh)
+ dw2_asm_output_data (4, 0xffffffff, "Initial length escape value"
+ " indicating 64-bit DWARF extension");
+ dw2_asm_output_delta (for_eh ? 4 : dwarf_offset_size, l2, l1,
+ "FDE Length");
ASM_OUTPUT_LABEL (asm_out_file, l1);
if (for_eh)
@@ -812,14 +801,11 @@ output_call_frame_info (int for_eh)
/* Output the CIE. */
ASM_GENERATE_INTERNAL_LABEL (l1, CIE_AFTER_SIZE_LABEL, for_eh);
ASM_GENERATE_INTERNAL_LABEL (l2, CIE_END_LABEL, for_eh);
- if (!XCOFF_DEBUGGING_INFO || for_eh)
- {
- if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4 && !for_eh)
- dw2_asm_output_data (4, 0xffffffff,
- "Initial length escape value indicating 64-bit DWARF extension");
- dw2_asm_output_delta (for_eh ? 4 : dwarf_offset_size, l2, l1,
- "Length of Common Information Entry");
- }
+ if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4 && !for_eh)
+ dw2_asm_output_data (4, 0xffffffff,
+ "Initial length escape value indicating 64-bit DWARF extension");
+ dw2_asm_output_delta (for_eh ? 4 : dwarf_offset_size, l2, l1,
+ "Length of Common Information Entry");
ASM_OUTPUT_LABEL (asm_out_file, l1);
/* Now that the CIE pointer is PC-relative for EH,
@@ -3679,8 +3665,7 @@ static GTY (()) vec<macinfo_entry, va_gc> *macinfo_table;
/* True if .debug_macinfo or .debug_macros section is going to be
emitted. */
#define have_macinfo \
- ((!XCOFF_DEBUGGING_INFO || HAVE_XCOFF_DWARF_EXTRAS) \
- && debug_info_level >= DINFO_LEVEL_VERBOSE \
+ (debug_info_level >= DINFO_LEVEL_VERBOSE \
&& !macinfo_table->is_empty ())
/* Vector of dies for which we should generate .debug_ranges info. */
@@ -4982,9 +4967,6 @@ add_AT_loc_list (dw_die_ref die, enum dwarf_attribute attr_kind, dw_loc_list_ref
{
dw_attr_node attr;
- if (XCOFF_DEBUGGING_INFO && !HAVE_XCOFF_DWARF_EXTRAS)
- return;
-
attr.dw_attr = attr_kind;
attr.dw_attr_val.val_class = dw_val_class_loc_list;
attr.dw_attr_val.val_entry = NULL;
@@ -5008,9 +4990,6 @@ add_AT_view_list (dw_die_ref die, enum dwarf_attribute attr_kind)
{
dw_attr_node attr;
- if (XCOFF_DEBUGGING_INFO && !HAVE_XCOFF_DWARF_EXTRAS)
- return;
-
attr.dw_attr = attr_kind;
attr.dw_attr_val.val_class = dw_val_class_view_list;
attr.dw_attr_val.val_entry = NULL;
@@ -11166,15 +11145,12 @@ output_dwarf_version ()
static void
output_compilation_unit_header (enum dwarf_unit_type ut)
{
- if (!XCOFF_DEBUGGING_INFO)
- {
- if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4)
- dw2_asm_output_data (4, 0xffffffff,
- "Initial length escape value indicating 64-bit DWARF extension");
- dw2_asm_output_data (dwarf_offset_size,
- next_die_offset - DWARF_INITIAL_LENGTH_SIZE,
- "Length of Compilation Unit Info");
- }
+ if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4)
+ dw2_asm_output_data (4, 0xffffffff,
+ "Initial length escape value indicating 64-bit DWARF extension");
+ dw2_asm_output_data (dwarf_offset_size,
+ next_die_offset - DWARF_INITIAL_LENGTH_SIZE,
+ "Length of Compilation Unit Info");
output_dwarf_version ();
if (dwarf_version >= 5)
@@ -11683,14 +11659,11 @@ output_pubnames (vec<pubname_entry, va_gc> *names)
unsigned long pubnames_length = size_of_pubnames (names);
pubname_entry *pub;
- if (!XCOFF_DEBUGGING_INFO)
- {
- if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4)
- dw2_asm_output_data (4, 0xffffffff,
- "Initial length escape value indicating 64-bit DWARF extension");
- dw2_asm_output_data (dwarf_offset_size, pubnames_length,
- "Pub Info Length");
- }
+ if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4)
+ dw2_asm_output_data (4, 0xffffffff,
+ "Initial length escape value indicating 64-bit DWARF extension");
+ dw2_asm_output_data (dwarf_offset_size, pubnames_length,
+ "Pub Info Length");
/* Version number for pubnames/pubtypes is independent of dwarf version. */
dw2_asm_output_data (2, 2, "DWARF pubnames/pubtypes version");
@@ -11765,14 +11738,11 @@ output_aranges (void)
unsigned i;
unsigned long aranges_length = size_of_aranges ();
- if (!XCOFF_DEBUGGING_INFO)
- {
- if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4)
- dw2_asm_output_data (4, 0xffffffff,
- "Initial length escape value indicating 64-bit DWARF extension");
- dw2_asm_output_data (dwarf_offset_size, aranges_length,
- "Length of Address Ranges Info");
- }
+ if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4)
+ dw2_asm_output_data (4, 0xffffffff,
+ "Initial length escape value indicating 64-bit DWARF extension");
+ dw2_asm_output_data (dwarf_offset_size, aranges_length,
+ "Length of Address Ranges Info");
/* Version number for aranges is still 2, even up to DWARF5. */
dw2_asm_output_data (2, 2, "DWARF aranges version");
@@ -13066,14 +13036,11 @@ output_line_info (bool prologue_only)
ASM_GENERATE_INTERNAL_LABEL (p2, LN_PROLOG_END_LABEL,
output_line_info_generation++);
- if (!XCOFF_DEBUGGING_INFO)
- {
- if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4)
- dw2_asm_output_data (4, 0xffffffff,
- "Initial length escape value indicating 64-bit DWARF extension");
- dw2_asm_output_delta (dwarf_offset_size, l2, l1,
- "Length of Source Line Info");
- }
+ if (DWARF_INITIAL_LENGTH_SIZE - dwarf_offset_size == 4)
+ dw2_asm_output_data (4, 0xffffffff,
+ "Initial length escape value indicating 64-bit DWARF extension");
+ dw2_asm_output_delta (dwarf_offset_size, l2, l1,
+ "Length of Source Line Info");
ASM_OUTPUT_LABEL (asm_out_file, l1);
@@ -29144,8 +29111,6 @@ output_macinfo (const char *debug_line_label, bool early_lto_debug)
/* AIX Assembler inserts the length, so adjust the reference to match the
offset expected by debuggers. */
strcpy (dl_section_ref, debug_line_label);
- if (XCOFF_DEBUGGING_INFO)
- strcat (dl_section_ref, DWARF_INITIAL_LENGTH_SIZE_STR);
/* For .debug_macro emit the section header. */
if (!dwarf_strict || dwarf_version >= 5)
@@ -32350,8 +32315,6 @@ dwarf2out_finish (const char *filename)
/* AIX Assembler inserts the length, so adjust the reference to match the
offset expected by debuggers. */
strcpy (dl_section_ref, debug_line_section_label);
- if (XCOFF_DEBUGGING_INFO)
- strcat (dl_section_ref, DWARF_INITIAL_LENGTH_SIZE_STR);
if (debug_info_level >= DINFO_LEVEL_TERSE)
add_AT_lineptr (main_comp_unit_die, DW_AT_stmt_list,
@@ -33067,8 +33030,6 @@ dwarf2out_early_finish (const char *filename)
/* AIX Assembler inserts the length, so adjust the reference to match the
offset expected by debuggers. */
strcpy (dl_section_ref, debug_line_section_label);
- if (XCOFF_DEBUGGING_INFO)
- strcat (dl_section_ref, DWARF_INITIAL_LENGTH_SIZE_STR);
if (debug_info_level >= DINFO_LEVEL_TERSE)
add_AT_lineptr (comp_unit_die (), DW_AT_stmt_list, dl_section_ref);
@@ -83,16 +83,8 @@ along with GCC; see the file COPYING3. If not see
#include "function-abi.h"
#include "common/common-target.h"
-#ifdef XCOFF_DEBUGGING_INFO
-#include "xcoffout.h" /* Needed for external data declarations. */
-#endif
-
#include "dwarf2out.h"
-#ifdef DBX_DEBUGGING_INFO
-#include "dbxout.h"
-#endif
-
/* Most ports don't need to define CC_STATUS_INIT.
So define a null default for it to save conditionalization later. */
#ifndef CC_STATUS_INIT
@@ -2324,19 +2316,6 @@ final_scan_insn_1 (rtx_insn *insn, FILE *file, int optimize_p ATTRIBUTE_UNUSED,
TREE_ASM_WRITTEN (NOTE_BLOCK (insn)) = 1;
BLOCK_IN_COLD_SECTION_P (NOTE_BLOCK (insn)) = in_cold_section_p;
}
- if (write_symbols == DBX_DEBUG)
- {
- location_t *locus_ptr
- = block_nonartificial_location (NOTE_BLOCK (insn));
-
- if (locus_ptr != NULL)
- {
- override_filename = LOCATION_FILE (*locus_ptr);
- override_linenum = LOCATION_LINE (*locus_ptr);
- override_columnnum = LOCATION_COLUMN (*locus_ptr);
- override_discriminator = compute_discriminator (*locus_ptr);
- }
- }
break;
case NOTE_INSN_BLOCK_END:
@@ -2359,27 +2338,6 @@ final_scan_insn_1 (rtx_insn *insn, FILE *file, int optimize_p ATTRIBUTE_UNUSED,
gcc_assert (BLOCK_IN_COLD_SECTION_P (NOTE_BLOCK (insn))
== in_cold_section_p);
}
- if (write_symbols == DBX_DEBUG)
- {
- tree outer_block = BLOCK_SUPERCONTEXT (NOTE_BLOCK (insn));
- location_t *locus_ptr
- = block_nonartificial_location (outer_block);
-
- if (locus_ptr != NULL)
- {
- override_filename = LOCATION_FILE (*locus_ptr);
- override_linenum = LOCATION_LINE (*locus_ptr);
- override_columnnum = LOCATION_COLUMN (*locus_ptr);
- override_discriminator = compute_discriminator (*locus_ptr);
- }
- else
- {
- override_filename = NULL;
- override_linenum = 0;
- override_columnnum = 0;
- override_discriminator = 0;
- }
- }
break;
case NOTE_INSN_DELETED_LABEL:
@@ -4304,8 +4262,6 @@ rest_of_handle_final (void)
if (! quiet_flag)
fflush (asm_out_file);
- /* Write DBX symbols if requested. */
-
/* Note that for those inline functions where we don't initially
know for certain that we will be generating an out-of-line copy,
the first invocation of this routine (rest_of_compilation) will
@@ -24,24 +24,18 @@ along with GCC; see the file COPYING3. If not see
enum debug_info_type
{
- DINFO_TYPE_NONE = 0, /* No debug info. */
- DINFO_TYPE_DBX = 1, /* BSD .stabs for DBX. */
- DINFO_TYPE_DWARF2 = 2, /* Dwarf v2 debug info. */
- DINFO_TYPE_XCOFF = 3, /* IBM/Xcoff debug info. */
- DINFO_TYPE_VMS = 4, /* VMS debug info. */
- DINFO_TYPE_CTF = 5, /* CTF debug info. */
- DINFO_TYPE_BTF = 6, /* BTF debug info. */
- DINFO_TYPE_BTF_WITH_CORE = 7, /* BTF debug info with CO-RE relocations. */
+ DINFO_TYPE_NONE, /* No debug info. */
+ DINFO_TYPE_DWARF2, /* Dwarf v2 debug info. */
+ DINFO_TYPE_VMS, /* VMS debug info. */
+ DINFO_TYPE_CTF, /* CTF debug info. */
+ DINFO_TYPE_BTF, /* BTF debug info. */
+ DINFO_TYPE_BTF_WITH_CORE, /* BTF debug info with CO-RE relocations. */
DINFO_TYPE_MAX = DINFO_TYPE_BTF_WITH_CORE /* Marker only. */
};
#define NO_DEBUG (0U)
-/* Write DBX debug info (using dbxout.cc). */
-#define DBX_DEBUG (1U << DINFO_TYPE_DBX)
/* Write DWARF2 debug info (using dwarf2out.cc). */
#define DWARF2_DEBUG (1U << DINFO_TYPE_DWARF2)
-/* Write IBM/XCOFF debug info (using dbxout.cc). */
-#define XCOFF_DEBUG (1U << DINFO_TYPE_XCOFF)
/* Write VMS debug info (using vmsdbgout.cc). */
#define VMS_DEBUG (1U << DINFO_TYPE_VMS)
/* Write CTF debug info (using ctfout.cc). */
@@ -4639,14 +4639,6 @@ number_blocks (tree fn)
int n_blocks;
tree *block_vector;
- /* For XCOFF debugging output, we start numbering the blocks
- from 1 within each function, rather than keeping a running
- count. */
-#if defined (XCOFF_DEBUGGING_INFO)
- if (write_symbols == XCOFF_DEBUG)
- next_block_index = 1;
-#endif
-
block_vector = get_block_vector (DECL_INITIAL (fn), &n_blocks);
/* The top-level BLOCK isn't numbered at all. */
@@ -927,26 +927,11 @@ proper position among the other output files. */
# else
# define ASM_DEBUG_DWARF_OPTION "--gdwarf2"
# endif
-# if defined(DBX_DEBUGGING_INFO) && defined(DWARF2_DEBUGGING_INFO) \
- && defined(HAVE_AS_GDWARF2_DEBUG_FLAG) && defined(HAVE_AS_GSTABS_DEBUG_FLAG)
-# define ASM_DEBUG_SPEC \
- (PREFERRED_DEBUGGING_TYPE == DBX_DEBUG \
- ? "%{%:debug-level-gt(0):" \
- "%{gdwarf*:" ASM_DEBUG_DWARF_OPTION "};" \
- ":%{g*:--gstabs}}" ASM_MAP \
- : "%{%:debug-level-gt(0):" \
- "%{gstabs*:--gstabs;" \
- ":%{g*:" ASM_DEBUG_DWARF_OPTION "}}}" ASM_MAP)
-# else
-# if defined(DBX_DEBUGGING_INFO) && defined(HAVE_AS_GSTABS_DEBUG_FLAG)
-# define ASM_DEBUG_SPEC "%{g*:%{%:debug-level-gt(0):--gstabs}}" ASM_MAP
-# endif
# if defined(DWARF2_DEBUGGING_INFO) && defined(HAVE_AS_GDWARF2_DEBUG_FLAG)
# define ASM_DEBUG_SPEC "%{g*:%{%:debug-level-gt(0):" \
ASM_DEBUG_DWARF_OPTION "}}" ASM_MAP
# endif
# endif
-#endif
#ifndef ASM_DEBUG_SPEC
# define ASM_DEBUG_SPEC ""
#endif
@@ -960,14 +945,7 @@ proper position among the other output files. */
"%:dwarf-version-gt(3):--gdwarf-4 ;" \
"%:dwarf-version-gt(2):--gdwarf-3 ;" \
":--gdwarf2 }"
-# if defined(DBX_DEBUGGING_INFO) && defined(DWARF2_DEBUGGING_INFO)
-# define ASM_DEBUG_OPTION_SPEC \
- (PREFERRED_DEBUGGING_TYPE == DBX_DEBUG \
- ? "%{%:debug-level-gt(0):" \
- "%{gdwarf*:" ASM_DEBUG_OPTION_DWARF_OPT "}}" \
- : "%{%:debug-level-gt(0):" \
- "%{!gstabs*:%{g*:" ASM_DEBUG_OPTION_DWARF_OPT "}}}")
-# elif defined(DWARF2_DEBUGGING_INFO)
+# if defined(DWARF2_DEBUGGING_INFO)
# define ASM_DEBUG_OPTION_SPEC "%{g*:%{%:debug-level-gt(0):" \
ASM_DEBUG_OPTION_DWARF_OPT "}}"
# endif
@@ -507,8 +507,7 @@ go_langhook_pushdecl (tree decl ATTRIBUTE_UNUSED)
}
/* This hook is used to get the current list of declarations as trees.
- We don't support that; instead we use the write_globals hook. This
- can't simply crash because it is called by -gstabs. */
+ We don't support that; instead we use the write_globals hook. */
static tree
go_langhook_getdecls (void)
@@ -215,11 +215,7 @@ lang_specific_driver (struct cl_decoded_option **in_decoded_options,
case OPT_gdwarf:
case OPT_gdwarf_:
case OPT_ggdb:
- case OPT_gstabs:
- case OPT_gstabs_:
case OPT_gvms:
- case OPT_gxcoff:
- case OPT_gxcoff_:
saw_opt_g = true;
break;
deleted file mode 100644
@@ -1,35 +0,0 @@
-/* Copyright (C) 1997-2022 Free Software Foundation, Inc.
-
-This file is part of GCC.
-
-GCC is free software; you can redistribute it and/or modify it under
-the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 3, or (at your option) any later
-version.
-
-GCC is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-for more details.
-
-You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING3. If not see
-<http://www.gnu.org/licenses/>. */
-
-#ifndef GCC_GSTAB_H
-#define GCC_GSTAB_H
-
-#define __define_stab(NAME, CODE, STRING) NAME=CODE,
-
-enum
-{
-#include "stab.def"
-LAST_UNUSED_STAB_CODE
-};
-
-/* stabs debug codes really are integers with expressive names. */
-typedef int stab_code_type;
-
-#undef __define_stab
-
-#endif /* ! GCC_GSTAB_H */
@@ -53,7 +53,7 @@ const char *const debug_type_names[] =
static uint32_t debug_type_masks[] =
{
- NO_DEBUG, DBX_DEBUG, DWARF2_DEBUG, XCOFF_DEBUG, VMS_DEBUG,
+ NO_DEBUG, DWARF2_DEBUG, VMS_DEBUG,
CTF_DEBUG, BTF_DEBUG
};
@@ -3145,22 +3145,10 @@ common_handle_option (struct gcc_options *opts,
set_debug_level (NO_DEBUG, 2, arg, opts, opts_set, loc);
break;
- case OPT_gstabs:
- case OPT_gstabs_:
- set_debug_level (DBX_DEBUG, code == OPT_gstabs_, arg, opts, opts_set,
- loc);
- break;
-
case OPT_gvms:
set_debug_level (VMS_DEBUG, false, arg, opts, opts_set, loc);
break;
- case OPT_gxcoff:
- case OPT_gxcoff_:
- set_debug_level (XCOFF_DEBUG, code == OPT_gxcoff_, arg, opts, opts_set,
- loc);
- break;
-
case OPT_gz:
case OPT_gz_:
/* Handled completely via specs. */
@@ -3363,8 +3351,6 @@ set_debug_level (uint32_t dinfo, int extended, const char *arg,
struct gcc_options *opts, struct gcc_options *opts_set,
location_t loc)
{
- opts->x_use_gnu_debug_info_extensions = extended;
-
if (dinfo == NO_DEBUG)
{
if (opts->x_write_symbols == NO_DEBUG)
@@ -3378,8 +3364,6 @@ set_debug_level (uint32_t dinfo, int extended, const char *arg,
opts->x_write_symbols |= DWARF2_DEBUG;
else
opts->x_write_symbols = DWARF2_DEBUG;
-#elif defined DBX_DEBUGGING_INFO
- opts->x_write_symbols = DBX_DEBUG;
#endif
}
deleted file mode 100644
@@ -1,239 +0,0 @@
-/* Table of DBX symbol codes for the GNU system.
- Copyright (C) 1988-2022 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
-
- The GNU C Library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Library General Public License as
- published by the Free Software Foundation; either version 3 of the
- License, or (at your option) any later version.
-
- The GNU C Library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Library General Public License for more details.
-
- You should have received a copy of the GNU Library General Public
- License along with the GNU C Library; see the file COPYING3. If
- not see <http://www.gnu.org/licenses/>. */
-
-/* This contains contribution from Cygnus Support. */
-
-/* Global variable. Only the name is significant.
- To find the address, look in the corresponding external symbol. */
-__define_stab (N_GSYM, 0x20, "GSYM")
-
-/* Function name for BSD Fortran. Only the name is significant.
- To find the address, look in the corresponding external symbol. */
-__define_stab (N_FNAME, 0x22, "FNAME")
-
-/* Function name or text-segment variable for C. Value is its address.
- Desc is supposedly starting line number, but GCC doesn't set it
- and DBX seems not to miss it. */
-__define_stab (N_FUN, 0x24, "FUN")
-
-/* Data-segment variable with internal linkage. Value is its address.
- "Static Sym". */
-__define_stab (N_STSYM, 0x26, "STSYM")
-
-/* BSS-segment variable with internal linkage. Value is its address. */
-__define_stab (N_LCSYM, 0x28, "LCSYM")
-
-/* Begin function marker. */
-__define_stab (N_BNSYM, 0x2e, "BNSYM")
-
-/* End function marker. */
-__define_stab (N_ENSYM, 0x4e, "ENSYM")
-
-/* Name of main routine. Only the name is significant.
- This is not used in C. */
-__define_stab (N_MAIN, 0x2a, "MAIN")
-
-/* Global symbol in Pascal.
- Supposedly the value is its line number; I'm skeptical. */
-__define_stab (N_PC, 0x30, "PC")
-
-/* Number of symbols: 0, files,,funcs,lines according to Ultrix V4.0. */
-__define_stab (N_NSYMS, 0x32, "NSYMS")
-
-/* "No DST map for sym: name, ,0,type,ignored" according to Ultrix V4.0. */
-__define_stab (N_NOMAP, 0x34, "NOMAP")
-
-/* New stab from Solaris. I don't know what it means, but it
- don't seem to contain useful information. */
-__define_stab (N_OBJ, 0x38, "OBJ")
-
-/* New stab from Solaris. I don't know what it means, but it
- don't seem to contain useful information. Possibly related to the
- optimization flags used in this module. */
-__define_stab (N_OPT, 0x3c, "OPT")
-
-/* Register variable. Value is number of register. */
-__define_stab (N_RSYM, 0x40, "RSYM")
-
-/* Modula-2 compilation unit. Can someone say what info it contains? */
-__define_stab (N_M2C, 0x42, "M2C")
-
-/* Line number in text segment. Desc is the line number;
- value is corresponding address. */
-__define_stab (N_SLINE, 0x44, "SLINE")
-
-/* Similar, for data segment. */
-__define_stab (N_DSLINE, 0x46, "DSLINE")
-
-/* Similar, for bss segment. */
-__define_stab (N_BSLINE, 0x48, "BSLINE")
-
-/* Sun's source-code browser stabs. ?? Don't know what the fields are.
- Supposedly the field is "path to associated .cb file". THIS VALUE
- OVERLAPS WITH N_BSLINE! */
-__define_stab (N_BROWS, 0x48, "BROWS")
-
-/* GNU Modula-2 definition module dependency. Value is the modification time
- of the definition file. Other is nonzero if it is imported with the
- GNU M2 keyword %INITIALIZE. Perhaps N_M2C can be used if there
- are enough empty fields? */
-__define_stab(N_DEFD, 0x4a, "DEFD")
-
-/* THE FOLLOWING TWO STAB VALUES CONFLICT. Happily, one is for Modula-2
- and one is for C++. Still,... */
-/* GNU C++ exception variable. Name is variable name. */
-__define_stab (N_EHDECL, 0x50, "EHDECL")
-/* Modula2 info "for imc": name,,0,0,0 according to Ultrix V4.0. */
-__define_stab (N_MOD2, 0x50, "MOD2")
-
-/* GNU C++ `catch' clause. Value is its address. Desc is nonzero if
- this entry is immediately followed by a CAUGHT stab saying what exception
- was caught. Multiple CAUGHT stabs means that multiple exceptions
- can be caught here. If Desc is 0, it means all exceptions are caught
- here. */
-__define_stab (N_CATCH, 0x54, "CATCH")
-
-/* Structure or union element. Value is offset in the structure. */
-__define_stab (N_SSYM, 0x60, "SSYM")
-
-/* Name of main source file.
- Value is starting text address of the compilation. */
-__define_stab (N_SO, 0x64, "SO")
-
-/* Automatic variable in the stack. Value is offset from frame pointer.
- Also used for type descriptions. */
-__define_stab (N_LSYM, 0x80, "LSYM")
-
-/* Beginning of an include file. Only Sun uses this.
- In an object file, only the name is significant.
- The Sun linker puts data into some of the other fields. */
-__define_stab (N_BINCL, 0x82, "BINCL")
-
-/* Name of sub-source file (#include file).
- Value is starting text address of the compilation. */
-__define_stab (N_SOL, 0x84, "SOL")
-
-/* Parameter variable. Value is offset from argument pointer.
- (On most machines the argument pointer is the same as the frame pointer. */
-__define_stab (N_PSYM, 0xa0, "PSYM")
-
-/* End of an include file. No name.
- This and N_BINCL act as brackets around the file's output.
- In an object file, there is no significant data in this entry.
- The Sun linker puts data into some of the fields. */
-__define_stab (N_EINCL, 0xa2, "EINCL")
-
-/* Alternate entry point. Value is its address. */
-__define_stab (N_ENTRY, 0xa4, "ENTRY")
-
-/* Beginning of lexical block.
- The desc is the nesting level in lexical blocks.
- The value is the address of the start of the text for the block.
- The variables declared inside the block *precede* the N_LBRAC symbol. */
-__define_stab (N_LBRAC, 0xc0, "LBRAC")
-
-/* Place holder for deleted include file. Replaces a N_BINCL and everything
- up to the corresponding N_EINCL. The Sun linker generates these when
- it finds multiple identical copies of the symbols from an include file.
- This appears only in output from the Sun linker. */
-__define_stab (N_EXCL, 0xc2, "EXCL")
-
-/* Modula-2 scope information. Can someone say what info it contains? */
-__define_stab (N_SCOPE, 0xc4, "SCOPE")
-
-/* End of a lexical block. Desc matches the N_LBRAC's desc.
- The value is the address of the end of the text for the block. */
-__define_stab (N_RBRAC, 0xe0, "RBRAC")
-
-/* Begin named common block. Only the name is significant. */
-__define_stab (N_BCOMM, 0xe2, "BCOMM")
-
-/* End named common block. Only the name is significant
- (and it should match the N_BCOMM). */
-__define_stab (N_ECOMM, 0xe4, "ECOMM")
-
-/* End common (local name): value is address.
- I'm not sure how this is used. */
-__define_stab (N_ECOML, 0xe8, "ECOML")
-
-/* These STAB's are used on Gould systems for Non-Base register symbols
- or something like that. FIXME. I have assigned the values at random
- since I don't have a Gould here. Fixups from Gould folk welcome... */
-__define_stab (N_NBTEXT, 0xF0, "NBTEXT")
-__define_stab (N_NBDATA, 0xF2, "NBDATA")
-__define_stab (N_NBBSS, 0xF4, "NBBSS")
-__define_stab (N_NBSTS, 0xF6, "NBSTS")
-__define_stab (N_NBLCS, 0xF8, "NBLCS")
-
-/* Second symbol entry containing a length-value for the preceding entry.
- The value is the length. */
-__define_stab (N_LENG, 0xfe, "LENG")
-
-/* The above information, in matrix format.
-
- STAB MATRIX
- _________________________________________________
- | 00 - 1F are not dbx stab symbols |
- | In most cases, the low bit is the EXTernal bit|
-
- | 00 UNDEF | 02 ABS | 04 TEXT | 06 DATA |
- | 01 |EXT | 03 |EXT | 05 |EXT | 07 |EXT |
-
- | 08 BSS | 0A INDR | 0C FN_SEQ | 0E |
- | 09 |EXT | 0B | 0D | 0F |
-
- | 10 | 12 COMM | 14 SETA | 16 SETT |
- | 11 | 13 | 15 | 17 |
-
- | 18 SETD | 1A SETB | 1C SETV | 1E WARNING|
- | 19 | 1B | 1D | 1F FN |
-
- |_______________________________________________|
- | Debug entries with bit 01 set are unused. |
- | 20 GSYM | 22 FNAME | 24 FUN | 26 STSYM |
- | 28 LCSYM | 2A MAIN | 2C | 2E BNSYM |
- | 30 PC | 32 NSYMS | 34 NOMAP | 36 |
- | 38 OBJ | 3A | 3C OPT | 3E |
- | 40 RSYM | 42 M2C | 44 SLINE | 46 DSLINE |
- | 48 BSLINE*| 4A DEFD | 4C | 4E ENSYM |
- | 50 EHDECL*| 52 | 54 CATCH | 56 |
- | 58 | 5A | 5C | 5E |
- | 60 SSYM | 62 | 64 SO | 66 |
- | 68 | 6A | 6C | 6E |
- | 70 | 72 | 74 | 76 |
- | 78 | 7A | 7C | 7E |
- | 80 LSYM | 82 BINCL | 84 SOL | 86 |
- | 88 | 8A | 8C | 8E |
- | 90 | 92 | 94 | 96 |
- | 98 | 9A | 9C | 9E |
- | A0 PSYM | A2 EINCL | A4 ENTRY | A6 |
- | A8 | AA | AC | AE |
- | B0 | B2 | B4 | B6 |
- | B8 | BA | BC | BE |
- | C0 LBRAC | C2 EXCL | C4 SCOPE | C6 |
- | C8 | CA | CC | CE |
- | D0 | D2 | D4 | D6 |
- | D8 | DA | DC | DE |
- | E0 RBRAC | E2 BCOMM | E4 ECOMM | E6 |
- | E8 ECOML | EA | EC | EE |
- | F0 | F2 | F4 | F6 |
- | F8 | FA | FC | FE LENG |
- +-----------------------------------------------+
- * 50 EHDECL is also MOD2.
- * 48 BSLINE is also BROWS.
- */
@@ -1009,8 +1009,7 @@ extern void fancy_abort (const char *, int, const char *)
ASM_OUTPUT_DEFINE_LABEL_DIFFERENCE_SYMBOL HOST_WORDS_BIG_ENDIAN \
OBJC_PROLOGUE ALLOCATE_TRAMPOLINE HANDLE_PRAGMA ROUND_TYPE_SIZE \
ROUND_TYPE_SIZE_UNIT CONST_SECTION_ASM_OP CRT_GET_RFIB_TEXT \
- DBX_LBRAC_FIRST DBX_OUTPUT_ENUM DBX_OUTPUT_SOURCE_FILENAME \
- DBX_WORKING_DIRECTORY INSN_CACHE_DEPTH INSN_CACHE_SIZE \
+ INSN_CACHE_DEPTH INSN_CACHE_SIZE \
INSN_CACHE_LINE_WIDTH INIT_SECTION_PREAMBLE NEED_ATEXIT ON_EXIT \
EXIT_BODY OBJECT_FORMAT_ROSE MULTIBYTE_CHARS MAP_CHARACTER \
LIBGCC_NEEDS_DOUBLE FINAL_PRESCAN_LABEL DEFAULT_CALLER_SAVES \
@@ -1023,15 +1022,14 @@ extern void fancy_abort (const char *, int, const char *)
MAX_WCHAR_TYPE_SIZE SHARED_SECTION_ASM_OP INTEGRATE_THRESHOLD \
FINAL_REG_PARM_STACK_SPACE MAYBE_REG_PARM_STACK_SPACE \
TRADITIONAL_PIPELINE_INTERFACE DFA_PIPELINE_INTERFACE \
- DBX_OUTPUT_STANDARD_TYPES BUILTIN_SETJMP_FRAME_VALUE \
+ BUILTIN_SETJMP_FRAME_VALUE \
SUNOS4_SHARED_LIBRARIES PROMOTE_FOR_CALL_ONLY \
SPACE_AFTER_L_OPTION NO_RECURSIVE_FUNCTION_CSE \
DEFAULT_MAIN_RETURN TARGET_MEM_FUNCTIONS EXPAND_BUILTIN_VA_ARG \
COLLECT_PARSE_FLAG DWARF2_GENERATE_TEXT_SECTION_LABEL WINNING_GDB \
ASM_OUTPUT_FILENAME ASM_OUTPUT_SOURCE_LINE FILE_NAME_JOINER \
- GDB_INV_REF_REGPARM_STABS_LETTER DBX_MEMPARM_STABS_LETTER \
- PUT_SDB_SRC_FILE STABS_GCC_MARKER DBX_OUTPUT_FUNCTION_END \
- DBX_OUTPUT_GCC_MARKER DBX_FINISH_SYMBOL SDB_GENERATE_FAKE \
+ GDB_INV_REF_REGPARM_STABS_LETTER \
+ PUT_SDB_SRC_FILE STABS_GCC_MARKER SDB_GENERATE_FAKE \
NON_SAVING_SETJMP TARGET_LATE_RTL_PROLOGUE_EPILOGUE \
CASE_DROPS_THROUGH TARGET_BELL TARGET_BS TARGET_CR TARGET_DIGIT0 \
TARGET_ESC TARGET_FF TARGET_NEWLINE TARGET_TAB TARGET_VT \
@@ -1056,8 +1054,8 @@ extern void fancy_abort (const char *, int, const char *)
PREFERRED_OUTPUT_RELOAD_CLASS SYSTEM_INCLUDE_DIR \
STANDARD_INCLUDE_DIR STANDARD_INCLUDE_COMPONENT \
LINK_ELIMINATE_DUPLICATE_LDIRECTORIES MIPS_DEBUGGING_INFO \
- IDENT_ASM_OP ALL_COP_ADDITIONAL_REGISTER_NAMES DBX_OUTPUT_LBRAC \
- DBX_OUTPUT_NFUN DBX_OUTPUT_RBRAC RANGE_TEST_NON_SHORT_CIRCUIT \
+ IDENT_ASM_OP ALL_COP_ADDITIONAL_REGISTER_NAMES \
+ RANGE_TEST_NON_SHORT_CIRCUIT \
REAL_VALUE_TRUNCATE REVERSE_CONDEXEC_PREDICATES_P \
TARGET_ALIGN_ANON_BITFIELDS TARGET_NARROW_VOLATILE_BITFIELDS \
IDENT_ASM_OP UNALIGNED_SHORT_ASM_OP UNALIGNED_INT_ASM_OP \
@@ -62,8 +62,6 @@
# else
# ifdef TARGET_ASM_NAMED_SECTION
# define TARGET_ASM_CONSTRUCTOR default_named_section_asm_out_constructor
-# else
-# define TARGET_ASM_CONSTRUCTOR default_stabs_asm_out_constructor
# endif
# endif
#endif
@@ -74,8 +72,6 @@
# else
# ifdef TARGET_ASM_NAMED_SECTION
# define TARGET_ASM_DESTRUCTOR default_named_section_asm_out_destructor
-# else
-# define TARGET_ASM_DESTRUCTOR default_stabs_asm_out_destructor
# endif
# endif
#endif
deleted file mode 100644
@@ -1,12 +0,0 @@
-// Origin: PR c++/51032
-// { dg-do compile { target { c++11 && stabs } } }
-// { dg-options "-gstabs+" }
-
-template <class C>
-struct A {
- template<class U> using B = U*;
- int a;
-};
-
-A<int> a;
-
deleted file mode 100644
@@ -1,17 +0,0 @@
-/* { dg-do compile { target stabs } } */
-/* { dg-options "-gstabs+ -fno-eliminate-unused-debug-types" } */
-
-const int foobar = 4;
-int foo ()
-{
- return foobar + 1;
-}
-
-int main()
-{
- int i;
- i = foo();
- return i;
-}
-
-/* { dg-final { scan-assembler ".stabs.*foobar:(c=i|S)" } } */
deleted file mode 100644
@@ -1,17 +0,0 @@
-/* { dg-do compile { target stabs } } */
-/* { dg-options "-gstabs+ -fno-eliminate-unused-debug-types -ftoplevel-reorder" } */
-
-const int foobar = 4;
-int foo ()
-{
- return foobar + 1;
-}
-
-int main()
-{
- int i;
- i = foo();
- return i;
-}
-
-/* { dg-final { scan-assembler ".stabs.*foobar:c=i" } } */
deleted file mode 100644
@@ -1,14 +0,0 @@
-/* Test lang in N_SO stab. */
-/* Contributed by Devang Patel <dpatel@apple.com> */
-
-/* { dg-do compile { target stabs } } */
-/* { dg-options "-gstabs" } */
-
-int
-main ()
-{
- return 0;
-}
-
-/* { dg-final { scan-assembler ".stabs.*100,0,2" } } */
-
deleted file mode 100644
@@ -1,15 +0,0 @@
-/* Test dead code strip support. */
-/* Contributed by Devang Patel <dpatel@apple.com> */
-
-/* { dg-do compile { target { *-*-darwin* && stabs } } } */
-/* { dg-options "-gstabs+ -fno-eliminate-unused-debug-symbols" } */
-
-int
-main ()
-{
- return 0;
-}
-
-/* { dg-final { scan-assembler ".stabd.46,0,0" } } */
-/* { dg-final { scan-assembler ".stabd.78,0,0" } } */
-
deleted file mode 100644
@@ -1,35 +0,0 @@
-/* Test to make sure that stabs for C symbols that go into .comm have the
- proper structure. These should be lettered G for the struct that gives
- the name to the .comm, and should be V or S for .lcomm symbols. */
-
-__attribute__ ((used))
-static char i_outer;
-struct {
- char f1;
- char f2;
-} opta;
-struct {
- char f1;
- char f2;
-} optb;
-
-int
-main()
-{
- static char i_inner[2] __attribute__ ((used));
- i_inner[0] = 'a'; i_inner[1] = 'b';
- opta.f1 = 'c';
- opta.f2 = 'd';
- optb.f1 = 'C';
- optb.f2 = 'D';
- i_outer = 'e';
-/* { dg-do compile } */
-/* { dg-skip-if "No stabs" { mmix-*-* alpha*-*-* hppa*64*-*-* ia64-*-* *-*-vxworks* } } */
-/* { dg-skip-if "stabs only" { *-*-* } { "*" } { "-gstabs" } } */
- return 0;
-}
-
-/* { dg-final { scan-assembler ".stabs.*i_inner:V" } } */
-/* { dg-final { scan-assembler ".stabs.*i_outer:S" } } */
-/* { dg-final { scan-assembler ".stabs.*opta:G" } } */
-/* { dg-final { scan-assembler ".stabs.*optb:G" } } */
deleted file mode 100644
@@ -1,8 +0,0 @@
-/* { dg-do compile } */
-/* { dg-options "-gstabs2 -gdwarf-4 -gstabs3" } */
-/* { dg-error "conflicts with prior selectio" "" { target *-*-* } 0 } */
-
-void
-foo (void)
-{
-}
deleted file mode 100644
@@ -1,12 +0,0 @@
-/* Test Attribute Vector associated with vector type stabs. */
-/* { dg-do compile { target powerpc*-*-darwin* } } */
-/* { dg-require-effective-target stabs } */
-/* { dg-options "-gstabs+ -fno-eliminate-unused-debug-types -faltivec" } */
-
-int main ()
-{
- vector int vi = { 6,7,8,9 };
- return 0;
-}
-
-/* { dg-final { scan-assembler ".stabs.*vi\:\\(0,\[0-9\]+\\)=\@V" } } */
deleted file mode 100644
@@ -1,23 +0,0 @@
-/* This test case would get an unresolved symbol during link
- because stabs referred to an optimized-away literal pool
- entry. */
-
-/* { dg-do run } */
-/* { dg-options "-O2 -fno-omit-frame-pointer -gstabs" } */
-
-int main (void)
-{
- static char buf[4096];
- char *p;
-
- do
- {
- p = buf;
- asm volatile ("" : : : "memory", "0", "1", "2", "3", "4", "5", "6",
- "7", "8", "9", "10", "12");
- }
- while (*p);
-
- return 0;
-}
-
deleted file mode 100644
@@ -1,35 +0,0 @@
-C Test program for common block debugging. G. Helffrich 11 July 2004.
-C { dg-do compile }
-C { dg-skip-if "No stabs" { aarch64*-*-* mmix-*-* alpha*-*-* hppa*64*-*-* ia64-*-* *-*-vxworks* } }
-C { dg-skip-if "No stabs" { *-*-* } { "*" } { "-gstabs" } }
- common i,j
- common /label/l,m
- i = 1
- j = 2
- k = 3
- l = 4
- m = 5
- call sub
- end
- subroutine sub
- common /label/l,m
- logical first
- save n
- data first /.true./
- if (first) then
- n = 0
- first = .false.
- endif
- n = n + 1
- l = l + 1
- return
- end
-
-C { dg-final { scan-assembler ".stabs.*\"__BLNK__\",226" } }
-C { dg-final { scan-assembler ".stabs.*\"i:V.*\",.*,0" } }
-C { dg-final { scan-assembler ".stabs.*\"j:V.*\",.*,4" } }
-C { dg-final { scan-assembler ".stabs.*\"__BLNK__\",228" } }
-C { dg-final { scan-assembler ".stabs.*\"label_\",226" } }
-C { dg-final { scan-assembler ".stabs.*\"l:V.*\",.*,0" } }
-C { dg-final { scan-assembler ".stabs.*\"m:V.*\",.*,4" } }
-C { dg-final { scan-assembler ".stabs.*\"label_\",228" } }
@@ -656,7 +656,7 @@ proc gcc-dg-target-supports-debug-format { target_compile trivial type } {
proc gcc-dg-debug-runtest { target_compile trivial opt_opts testcases } {
if ![info exists DEBUG_TORTURE_OPTIONS] {
set DEBUG_TORTURE_OPTIONS ""
- foreach type {-gctf -gdwarf-2 -gstabs -gstabs+ -gxcoff -gxcoff+} {
+ foreach type {-gctf -gdwarf-2} {
if [expr [gcc-dg-target-supports-debug-format \
$target_compile $trivial $type]] {
if { $type == "-gctf" } {
@@ -170,7 +170,7 @@ proc gfortran-dg-debug-runtest { target_compile trivial opt_opts testcases } {
if ![info exists DEBUG_TORTURE_OPTIONS] {
set DEBUG_TORTURE_OPTIONS ""
- set type_list [list "-gstabs" "-gstabs+" "-gxcoff" "-gxcoff+" "-gdwarf-2" ]
+ set type_list [list "-gdwarf-2" ]
foreach type $type_list {
set comp_output [$target_compile \
"$srcdir/$subdir/$trivial" "trivial.S" assembly \
@@ -1117,15 +1117,6 @@ proc check_effective_target_pthread {} {
} "-pthread"]
}
-# Return 1 if compilation with -gstabs is error-free for trivial
-# code, 0 otherwise.
-
-proc check_effective_target_stabs {} {
- return [check_no_compiler_messages stabs object {
- void foo (void) { }
- } "-gstabs"]
-}
-
# Return 1 if compilation with -mpe-aligned-commons is error-free
# for trivial code, 0 otherwise.
deleted file mode 100644
@@ -1,19 +0,0 @@
-/* Check if the final SO STABS record goes into the .text section. */
-/* Contributed by Ziemowit Laski <zlaski@apple.com> */
-
-/* { dg-do compile { target stabs } } */
-/* { dg-options "-gstabs" } */
-/* { dg-additional-options "-Wno-objc-root-class" } */
-
-@interface MyClass
-+ newWithArg: arg;
-@end
-
-@implementation MyClass
-+ newWithArg: arg
-{
-}
-@end
-
-/* See PR target/52152 for the xfail. */
-/* { dg-final { scan-assembler "(.SUBSPA.*\[\$\]CODE\[\$\]|.text\"?)\n\t.stabs.*100,0,0,(\[\.\$\])?L?L\[\$\]?etext\[0-9\]*\n(\[\.\$\])?L?L\[\$\]?etext" { xfail mips*-*-elf* } } } */
@@ -89,14 +89,6 @@ along with GCC; see the file COPYING3. If not see
#include "ipa-param-manipulation.h"
#include "dbgcnt.h"
-#if defined(DBX_DEBUGGING_INFO) || defined(XCOFF_DEBUGGING_INFO)
-#include "dbxout.h"
-#endif
-
-#ifdef XCOFF_DEBUGGING_INFO
-#include "xcoffout.h" /* Needed for external data declarations. */
-#endif
-
#include "selftest.h"
#ifdef HAVE_isl
@@ -1417,21 +1409,8 @@ process_options (bool no_backend)
&& ctf_debug_info_level == CTFINFO_LEVEL_NONE)
write_symbols = NO_DEBUG;
- /* Warn if STABS debug gets enabled and is not the default. */
- if (PREFERRED_DEBUGGING_TYPE != DBX_DEBUG && (write_symbols & DBX_DEBUG))
- warning (0, "STABS debugging information is obsolete and not "
- "supported anymore");
-
if (write_symbols == NO_DEBUG)
;
-#if defined(DBX_DEBUGGING_INFO)
- else if (write_symbols == DBX_DEBUG)
- debug_hooks = &dbx_debug_hooks;
-#endif
-#if defined(XCOFF_DEBUGGING_INFO)
- else if (write_symbols == XCOFF_DEBUG)
- debug_hooks = &xcoff_debug_hooks;
-#endif
#ifdef DWARF2_DEBUGGING_INFO
else if (dwarf_debuginfo_p ())
debug_hooks = &dwarf2_debug_hooks;
@@ -62,10 +62,6 @@ along with GCC; see the file COPYING3. If not see
#include "toplev.h"
#include "opts.h"
-#ifdef XCOFF_DEBUGGING_INFO
-#include "xcoffout.h" /* Needed for external data declarations. */
-#endif
-
/* The (assembler) name of the first globally-visible object output. */
extern GTY(()) const char *first_global_object_name;
extern GTY(()) const char *weak_global_object_name;
deleted file mode 100644
@@ -1,494 +0,0 @@
-/* Output xcoff-format symbol table information from GNU compiler.
- Copyright (C) 1992-2022 Free Software Foundation, Inc.
-
-This file is part of GCC.
-
-GCC is free software; you can redistribute it and/or modify it under
-the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 3, or (at your option) any later
-version.
-
-GCC is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-for more details.
-
-You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING3. If not see
-<http://www.gnu.org/licenses/>. */
-
-/* Output xcoff-format symbol table data. The main functionality is contained
- in dbxout.cc. This file implements the sdbout-like parts of the xcoff
- interface. Many functions are very similar to their counterparts in
- the former sdbout.c file. */
-
-#include "config.h"
-#include "system.h"
-#include "coretypes.h"
-#include "target.h"
-#include "rtl.h"
-#include "tree.h"
-#include "diagnostic-core.h"
-#include "varasm.h"
-#include "output.h"
-#include "debug.h"
-#include "file-prefix-map.h" /* remap_debug_filename() */
-
-#ifdef XCOFF_DEBUGGING_INFO
-
-/* This defines the C_* storage classes. */
-#include "xcoff.h"
-#include "xcoffout.h"
-#include "dbxout.h"
-#include "gstab.h"
-
-/* Line number of beginning of current function, minus one.
- Negative means not in a function or not using xcoff. */
-
-static int xcoff_begin_function_line = -1;
-static int xcoff_inlining = 0;
-
-/* Name of the current include file. */
-
-const char *xcoff_current_include_file;
-
-/* Name of the current function file. This is the file the `.bf' is
- emitted from. In case a line is emitted from a different file,
- (by including that file of course), then the line number will be
- absolute. */
-
-static const char *xcoff_current_function_file;
-
-/* Names of bss and data sections. These should be unique names for each
- compilation unit. */
-
-char *xcoff_bss_section_name;
-char *xcoff_private_data_section_name;
-char *xcoff_private_rodata_section_name;
-char *xcoff_tls_data_section_name;
-char *xcoff_read_only_section_name;
-
-/* Last source file name mentioned in a NOTE insn. */
-
-const char *xcoff_lastfile;
-
-/* Macro definitions used below. */
-
-#define ABS_OR_RELATIVE_LINENO(LINENO) \
-((xcoff_inlining) ? (LINENO) : (LINENO) - xcoff_begin_function_line)
-
-/* Output source line numbers via ".line". */
-#define ASM_OUTPUT_LINE(FILE,LINENUM) \
- do \
- { \
- /* Make sure we're in a function and prevent output of .line 0, as \
- line # 0 is meant for symbol addresses in xcoff. Additionally, \
- line numbers are 'unsigned short' in 32-bit mode. */ \
- if (xcoff_begin_function_line >= 0) \
- { \
- int lno = ABS_OR_RELATIVE_LINENO (LINENUM); \
- if (lno > 0 && (TARGET_64BIT || lno <= (int)USHRT_MAX)) \
- fprintf (FILE, "\t.line\t%d\n", lno); \
- } \
- } \
- while (0)
-
-#define ASM_OUTPUT_LFB(FILE,LINENUM) \
-{ \
- if (xcoff_begin_function_line == -1) \
- { \
- xcoff_begin_function_line = (LINENUM) - 1;\
- fprintf (FILE, "\t.bf\t%d\n", (LINENUM)); \
- } \
- xcoff_current_function_file \
- = (xcoff_current_include_file \
- ? xcoff_current_include_file : main_input_filename); \
-}
-
-#define ASM_OUTPUT_LFE(FILE,LINENUM) \
- do \
- { \
- fprintf (FILE, "\t.ef\t%d\n", (LINENUM)); \
- xcoff_begin_function_line = -1; \
- } \
- while (0)
-
-#define ASM_OUTPUT_LBB(FILE,LINENUM,BLOCKNUM) \
- fprintf (FILE, "\t.bb\t%d\n", ABS_OR_RELATIVE_LINENO (LINENUM))
-
-#define ASM_OUTPUT_LBE(FILE,LINENUM,BLOCKNUM) \
- fprintf (FILE, "\t.eb\t%d\n", ABS_OR_RELATIVE_LINENO (LINENUM))
-
-static void xcoffout_block (tree, int, tree);
-static void xcoffout_source_file (FILE *, const char *, int);
-
-/* Support routines for XCOFF debugging info. */
-
-struct xcoff_type_number
-{
- const char *name;
- int number;
-};
-static const struct xcoff_type_number xcoff_type_numbers[] = {
- { "int", -1 },
- { "char", -2 },
- { "short int", -3 },
- { "long int", -4 }, /* fiddled to -31 if 64 bits */
- { "unsigned char", -5 },
- { "signed char", -6 },
- { "short unsigned int", -7 },
- { "unsigned int", -8 },
- /* No such type "unsigned". */
- { "long unsigned int", -10 }, /* fiddled to -32 if 64 bits */
- { "void", -11 },
- { "float", -12 },
- { "double", -13 },
- { "long double", -14 },
- /* Fortran types run from -15 to -29. */
- { "wchar", -30 }, /* XXX Should be "wchar_t" ? */
- { "long long int", -31 },
- { "long long unsigned int", -32 },
- /* Additional Fortran types run from -33 to -37. */
-
- /* ??? Should also handle built-in C++ and Obj-C types. There perhaps
- aren't any that C doesn't already have. */
-};
-
-/* Returns an XCOFF fundamental type number for DECL (assumed to be a
- TYPE_DECL), or 0 if dbxout.cc should assign a type number normally. */
-int
-xcoff_assign_fundamental_type_number (tree decl)
-{
- const char *name;
- size_t i;
-
- /* Do not waste time searching the list for non-intrinsic types. */
- if (DECL_NAME (decl) == 0 || ! DECL_IS_UNDECLARED_BUILTIN (decl))
- return 0;
-
- name = IDENTIFIER_POINTER (DECL_NAME (decl));
-
- /* Linear search, blech, but the list is too small to bother
- doing anything else. */
- for (i = 0; i < ARRAY_SIZE (xcoff_type_numbers); i++)
- if (!strcmp (xcoff_type_numbers[i].name, name))
- goto found;
- return 0;
-
- found:
- /* -4 and -10 should be replaced with -31 and -32, respectively,
- when used for a 64-bit type. */
- if (int_size_in_bytes (TREE_TYPE (decl)) == 8)
- {
- if (xcoff_type_numbers[i].number == -4)
- return -31;
- if (xcoff_type_numbers[i].number == -10)
- return -32;
- }
- return xcoff_type_numbers[i].number;
-}
-
-/* Print an error message for unrecognized stab codes. */
-
-#define UNKNOWN_STAB(STR) \
- internal_error ("no sclass for %s stab (0x%x)", STR, stab)
-
-/* Conversion routine from BSD stabs to AIX storage classes. */
-
-int
-stab_to_sclass (int stab)
-{
- switch (stab)
- {
- case N_GSYM:
- return C_GSYM;
-
- case N_FNAME:
- UNKNOWN_STAB ("N_FNAME");
-
- case N_FUN:
- return C_FUN;
-
- case N_STSYM:
- case N_LCSYM:
- return C_STSYM;
-
- case N_MAIN:
- UNKNOWN_STAB ("N_MAIN");
-
- case N_RSYM:
- return C_RSYM;
-
- case N_SSYM:
- UNKNOWN_STAB ("N_SSYM");
-
- case N_RPSYM:
- return C_RPSYM;
-
- case N_PSYM:
- return C_PSYM;
- case N_LSYM:
- return C_LSYM;
- case N_DECL:
- return C_DECL;
- case N_ENTRY:
- return C_ENTRY;
-
- case N_SO:
- UNKNOWN_STAB ("N_SO");
-
- case N_SOL:
- UNKNOWN_STAB ("N_SOL");
-
- case N_SLINE:
- UNKNOWN_STAB ("N_SLINE");
-
- case N_DSLINE:
- UNKNOWN_STAB ("N_DSLINE");
-
- case N_BSLINE:
- UNKNOWN_STAB ("N_BSLINE");
-
- case N_BINCL:
- UNKNOWN_STAB ("N_BINCL");
-
- case N_EINCL:
- UNKNOWN_STAB ("N_EINCL");
-
- case N_EXCL:
- UNKNOWN_STAB ("N_EXCL");
-
- case N_LBRAC:
- UNKNOWN_STAB ("N_LBRAC");
-
- case N_RBRAC:
- UNKNOWN_STAB ("N_RBRAC");
-
- case N_BCOMM:
- return C_BCOMM;
- case N_ECOMM:
- return C_ECOMM;
- case N_ECOML:
- return C_ECOML;
-
- case N_LENG:
- UNKNOWN_STAB ("N_LENG");
-
- case N_PC:
- UNKNOWN_STAB ("N_PC");
-
- case N_M2C:
- UNKNOWN_STAB ("N_M2C");
-
- case N_SCOPE:
- UNKNOWN_STAB ("N_SCOPE");
-
- case N_CATCH:
- UNKNOWN_STAB ("N_CATCH");
-
- case N_OPT:
- UNKNOWN_STAB ("N_OPT");
-
- default:
- UNKNOWN_STAB ("?");
- }
-}
-
-/* Output debugging info to FILE to switch to sourcefile FILENAME.
- INLINE_P is true if this is from an inlined function. */
-
-static void
-xcoffout_source_file (FILE *file, const char *filename, int inline_p)
-{
- if (filename
- && (xcoff_lastfile == 0 || strcmp (filename, xcoff_lastfile)
- || (inline_p && ! xcoff_inlining)
- || (! inline_p && xcoff_inlining)))
- {
- if (xcoff_current_include_file)
- {
- fprintf (file, "\t.ei\t");
- output_quoted_string (file,
- remap_debug_filename (xcoff_current_include_file));
- fprintf (file, "\n");
- xcoff_current_include_file = NULL;
- }
- xcoff_inlining = inline_p;
- if (strcmp (main_input_filename, filename) || inline_p)
- {
- fprintf (file, "\t.bi\t");
- output_quoted_string (file, remap_debug_filename (filename));
- fprintf (file, "\n");
- xcoff_current_include_file = filename;
- }
- xcoff_lastfile = filename;
- }
-}
-
-/* Output a line number symbol entry for location (FILENAME, LINE). */
-
-void
-xcoffout_source_line (unsigned int line, unsigned int column ATTRIBUTE_UNUSED,
- const char *filename, int discriminator ATTRIBUTE_UNUSED,
- bool is_stmt ATTRIBUTE_UNUSED)
-{
- bool inline_p = (strcmp (xcoff_current_function_file, filename) != 0
- || (int) line < xcoff_begin_function_line);
-
- xcoffout_source_file (asm_out_file, filename, inline_p);
-
- ASM_OUTPUT_LINE (asm_out_file, line);
-}
-
-/* Output the symbols defined in block number DO_BLOCK.
-
- This function works by walking the tree structure of blocks,
- counting blocks until it finds the desired block. */
-
-static unsigned int do_block = 0;
-
-static void
-xcoffout_block (tree block, int depth, tree args)
-{
- while (block)
- {
- /* Ignore blocks never expanded or otherwise marked as real. */
- if (TREE_USED (block))
- {
- /* When we reach the specified block, output its symbols. */
- if (BLOCK_NUMBER (block) == do_block)
- {
- /* Output the syms of the block. */
- if (debug_info_level != DINFO_LEVEL_TERSE || depth == 0)
- dbxout_syms (BLOCK_VARS (block));
- if (args)
- dbxout_reg_parms (args);
-
- /* We are now done with the block. Don't go to inner blocks. */
- return;
- }
- /* If we are past the specified block, stop the scan. */
- else if (BLOCK_NUMBER (block) >= do_block)
- return;
-
- /* Output the subblocks. */
- xcoffout_block (BLOCK_SUBBLOCKS (block), depth + 1, NULL_TREE);
- }
- block = BLOCK_CHAIN (block);
- }
-}
-
-/* Describe the beginning of an internal block within a function.
- Also output descriptions of variables defined in this block.
-
- N is the number of the block, by order of beginning, counting from 1,
- and not counting the outermost (function top-level) block.
- The blocks match the BLOCKs in DECL_INITIAL (current_function_decl),
- if the count starts at 0 for the outermost one. */
-
-void
-xcoffout_begin_block (unsigned int line, unsigned int n)
-{
- tree decl = current_function_decl;
-
- /* The IBM AIX compiler does not emit a .bb for the function level scope,
- so we avoid it here also. */
- if (n != 1)
- ASM_OUTPUT_LBB (asm_out_file, line, n);
-
- do_block = n;
- xcoffout_block (DECL_INITIAL (decl), 0, DECL_ARGUMENTS (decl));
-}
-
-/* Describe the end line-number of an internal block within a function. */
-
-void
-xcoffout_end_block (unsigned int line, unsigned int n)
-{
- if (n != 1)
- ASM_OUTPUT_LBE (asm_out_file, line, n);
-}
-
-/* Called at beginning of function (before prologue).
- Declare function as needed for debugging. */
-
-void
-xcoffout_declare_function (FILE *file, tree decl, const char *name)
-{
- size_t len;
-
- if (*name == '*')
- name++;
- len = strlen (name);
- if (name[len - 1] == ']')
- {
- char *n = XALLOCAVEC (char, len - 3);
- memcpy (n, name, len - 4);
- n[len - 4] = '\0';
- name = n;
- }
-
- /* Any pending .bi or .ei must occur before the .function pseudo op.
- Otherwise debuggers will think that the function is in the previous
- file and/or at the wrong line number. */
- xcoffout_source_file (file, DECL_SOURCE_FILE (decl), 0);
- dbxout_symbol (decl, 0);
-
- /* .function NAME, TOP, MAPPING, TYPE, SIZE
- 16 and 044 are placeholders for backwards compatibility */
- fprintf (file, "\t.function .%s,.%s,16,044,FE..%s-.%s\n",
- name, name, name, name);
-}
-
-/* Called at beginning of function body (at start of prologue).
- Record the function's starting line number, so we can output
- relative line numbers for the other lines.
- Record the file name that this function is contained in. */
-
-void
-xcoffout_begin_prologue (unsigned int line,
- unsigned int column ATTRIBUTE_UNUSED,
- const char *file ATTRIBUTE_UNUSED)
-{
- ASM_OUTPUT_LFB (asm_out_file, line);
- dbxout_parms (DECL_ARGUMENTS (current_function_decl));
-
- /* Emit the symbols for the outermost BLOCK's variables. sdbout.c did this
- in sdbout_begin_block, but there is no guarantee that there will be any
- inner block 1, so we must do it here. This gives a result similar to
- dbxout, so it does make some sense. */
- do_block = BLOCK_NUMBER (DECL_INITIAL (current_function_decl));
- xcoffout_block (DECL_INITIAL (current_function_decl), 0,
- DECL_ARGUMENTS (current_function_decl));
-
- ASM_OUTPUT_LINE (asm_out_file, line);
-}
-
-/* Called at end of function (before epilogue).
- Describe end of outermost block. */
-
-void
-xcoffout_end_function (unsigned int last_linenum)
-{
- ASM_OUTPUT_LFE (asm_out_file, last_linenum);
-}
-
-/* Output xcoff info for the absolute end of a function.
- Called after the epilogue is output. */
-
-void
-xcoffout_end_epilogue (unsigned int line ATTRIBUTE_UNUSED,
- const char *file ATTRIBUTE_UNUSED)
-{
- /* We need to pass the correct function size to .function, otherwise,
- the xas assembler can't figure out the correct size for the function
- aux entry. So, we emit a label after the last instruction which can
- be used by the .function pseudo op to calculate the function size. */
-
- const char *fname = XSTR (XEXP (DECL_RTL (current_function_decl), 0), 0);
- if (*fname == '*')
- ++fname;
- fprintf (asm_out_file, "FE..");
- ASM_OUTPUT_LABEL (asm_out_file, fname);
-}
-#endif /* XCOFF_DEBUGGING_INFO */
deleted file mode 100644
@@ -1,194 +0,0 @@
-/* XCOFF definitions. These are needed in dbxout.cc, final.cc,
- and xcoffout.h.
- Copyright (C) 1998-2022 Free Software Foundation, Inc.
-
-This file is part of GCC.
-
-GCC is free software; you can redistribute it and/or modify it under
-the terms of the GNU General Public License as published by the Free
-Software Foundation; either version 3, or (at your option) any later
-version.
-
-GCC is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-for more details.
-
-You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING3. If not see
-<http://www.gnu.org/licenses/>. */
-
-#ifndef GCC_XCOFFOUT_H
-#define GCC_XCOFFOUT_H
-
-/* Tags and typedefs are C_DECL in XCOFF, not C_LSYM. */
-
-#define DBX_TYPE_DECL_STABS_CODE N_DECL
-
-/* Use the XCOFF predefined type numbers. */
-
-#define DBX_ASSIGN_FUNDAMENTAL_TYPE_NUMBER(TYPE) \
- xcoff_assign_fundamental_type_number (TYPE)
-
-/* Any type with a negative type index has already been output. */
-
-#define DBX_TYPE_DEFINED(TYPE) (TYPE_SYMTAB_ADDRESS (TYPE) < 0)
-
-/* Must use N_STSYM for static const variables (those in the text section)
- instead of N_FUN. */
-
-#define DBX_STATIC_CONST_VAR_CODE N_STSYM
-
-/* For static variables, output code to define the start of a static block. */
-
-#define DBX_STATIC_BLOCK_START(ASMFILE,CODE) \
-{ \
- if ((CODE) == N_STSYM) \
- fprintf ((ASMFILE), "\t.bs\t%s[RW]\n", xcoff_private_data_section_name);\
- else if ((CODE) == N_LCSYM) \
- fprintf ((ASMFILE), "\t.bs\t%s\n", xcoff_bss_section_name); \
-}
-
-/* For static variables, output code to define the end of a static block. */
-
-#define DBX_STATIC_BLOCK_END(ASMFILE,CODE) \
-{ \
- if ((CODE) == N_STSYM || (CODE) == N_LCSYM) \
- fputs ("\t.es\n", (ASMFILE)); \
-}
-
-/* We must use N_RPYSM instead of N_RSYM for register parameters. */
-
-#define DBX_REGPARM_STABS_CODE N_RPSYM
-
-/* We must use 'R' instead of 'P' for register parameters. */
-
-#define DBX_REGPARM_STABS_LETTER 'R'
-
-/* Define our own finish symbol function, since xcoff stabs have their
- own different format. */
-
-#define DBX_FINISH_STABS(SYM, CODE, LINE, ADDR, LABEL, NUMBER) do { \
- if (ADDR) \
- { \
- /* If we are writing a function name, we must emit a dot in \
- order to refer to the function code, not its descriptor. */ \
- if (CODE == N_FUN) \
- putc ('.', asm_out_file); \
- \
- /* If we are writing a function name, we must ensure that \
- there is no storage-class suffix on the name. */ \
- if (CODE == N_FUN && GET_CODE (ADDR) == SYMBOL_REF) \
- { \
- const char *_p = XSTR (ADDR, 0); \
- if (*_p == '*') \
- fputs (_p+1, asm_out_file); \
- else \
- for (; *_p != '[' && *_p; _p++) \
- putc (*_p != '$' ? *_p : '_', asm_out_file); \
- } \
- else \
- output_addr_const (asm_out_file, ADDR); \
- } \
- /* Another special case: N_GSYM always gets the symbol name, \
- whether or not LABEL or NUMBER are set. */ \
- else if (CODE == N_GSYM) \
- assemble_name (asm_out_file, XSTR (XEXP (DECL_RTL (SYM), 0), 0)); \
- else if (LABEL) \
- assemble_name (asm_out_file, LABEL); \
- else \
- dbxout_int (NUMBER); \
- putc (',', asm_out_file); \
- dbxout_int (stab_to_sclass (CODE)); \
- fputs (",0\n", asm_out_file); \
-} while (0)
-
-/* These are IBM XCOFF extensions we need to reference in dbxout.cc
- and xcoffout.cc. */
-
-/* AIX XCOFF uses this for typedefs. This can have any value, since it is
- only used for translation into a C_DECL storage class. */
-#ifndef N_DECL
-#define N_DECL 0x8c
-#endif
-/* AIX XCOFF uses this for parameters passed in registers. This can have
- any value, since it is only used for translation into a C_RPSYM storage
- class. */
-#ifndef N_RPSYM
-#define N_RPSYM 0x8e
-#endif
-
-/* Name of the current include file. */
-
-extern const char *xcoff_current_include_file;
-
-/* Names of bss and data sections. These should be unique names for each
- compilation unit. */
-
-extern char *xcoff_bss_section_name;
-extern char *xcoff_private_data_section_name;
-extern char *xcoff_private_rodata_section_name;
-extern char *xcoff_tls_data_section_name;
-extern char *xcoff_read_only_section_name;
-
-/* Last source file name mentioned in a NOTE insn. */
-
-extern const char *xcoff_lastfile;
-
-/* Don't write out path name for main source file. */
-#define NO_DBX_MAIN_SOURCE_DIRECTORY 1
-
-/* Write out main source file name using ".file" rather than ".stabs".
- We don't actually do this here, because the assembler gets confused if there
- is more than one .file directive. rs6000_xcoff_file_start is already
- emitting a .file directory, so we don't output one here also.
- Initialize xcoff_lastfile. */
-#define DBX_OUTPUT_MAIN_SOURCE_FILENAME(FILE,FILENAME) \
- xcoff_lastfile = (FILENAME)
-
-/* If we are still in an include file, its end must be marked. */
-#define DBX_OUTPUT_MAIN_SOURCE_FILE_END(FILE, FILENAME) \
-do { \
- if (xcoff_current_include_file) \
- { \
- fputs ("\t.ei\t", (FILE)); \
- output_quoted_string ((FILE), xcoff_current_include_file); \
- putc ('\n', (FILE)); \
- xcoff_current_include_file = NULL; \
- } \
-} while (0)
-
-/* Do not emit any marker for XCOFF until assembler allows XFT_CV. */
-#define NO_DBX_GCC_MARKER
-
-/* XCOFF32 maximum length is 64K; XLC limits to 16K. */
-#define DBX_CONTIN_LENGTH 16384
-
-/* XLC uses '?' as continuation character. */
-#define DBX_CONTIN_CHAR '?'
-
-/* Don't try to use the `x' type-cross-reference character in DBX data.
- Also has the consequence of putting each struct, union or enum
- into a separate .stabs, containing only cross-refs to the others. */
-#define DBX_NO_XREFS
-
-/* We must put stabs in the text section. If we don't the assembler
- won't handle them correctly; it will sometimes put stabs where gdb
- can't find them. */
-
-#define DEBUG_SYMS_TEXT
-
-/* Prototype functions in xcoffout.cc. */
-
-extern int stab_to_sclass (int);
-extern void xcoffout_begin_prologue (unsigned int, unsigned int, const char *);
-extern void xcoffout_begin_block (unsigned, unsigned);
-extern void xcoffout_end_epilogue (unsigned int, const char *);
-extern void xcoffout_end_function (unsigned int);
-extern void xcoffout_end_block (unsigned, unsigned);
-extern int xcoff_assign_fundamental_type_number (tree);
-extern void xcoffout_declare_function (FILE *, tree, const char *);
-extern void xcoffout_source_line (unsigned int, unsigned int, const char *,
- int, bool);
-
-#endif /* GCC_XCOFFOUT_H */