[v15,6/6] clk: meson: a1: add Amlogic A1 Peripherals clock controller driver

Message ID 20230517133309.9874-7-ddrokosov@sberdevices.ru
State New
Headers
Series add Amlogic A1 clock controller drivers |

Commit Message

Dmitry Rokosov May 17, 2023, 1:33 p.m. UTC
  Introduce Peripherals clock controller for Amlogic A1 SoC family.

A1 SoC has four clock controllers on the board: PLL, Peripherals, CPU,
and Audio.
This patchset adds support for Amlogic A1 Peripherals clock driver and
allows to generate clocks for all A1 SoC peripheral IPs.

Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
---
 drivers/clk/meson/Kconfig          |   10 +
 drivers/clk/meson/Makefile         |    1 +
 drivers/clk/meson/a1-peripherals.c | 2273 ++++++++++++++++++++++++++++
 drivers/clk/meson/a1-peripherals.h |  113 ++
 4 files changed, 2397 insertions(+)
 create mode 100644 drivers/clk/meson/a1-peripherals.c
 create mode 100644 drivers/clk/meson/a1-peripherals.h
  

Comments

Martin Blumenstingl May 19, 2023, 9:03 p.m. UTC | #1
Hi Dmitry,

On Wed, May 17, 2023 at 3:33 PM Dmitry Rokosov <ddrokosov@sberdevices.ru> wrote:
[...]
> +static struct clk_regmap sys_b_sel = {
> +       .data = &(struct clk_regmap_mux_data){
> +               .offset = SYS_CLK_CTRL0,
> +               .mask = 0x7,
> +               .shift = 26,
> +               .table = mux_table_sys,
> +       },
> +       .hw.init = &(struct clk_init_data){
> +               .name = "sys_b_sel",
> +               .ops = &clk_regmap_mux_ro_ops,
the sys_*_sel muxes and sys_*_gate are _ro...

> +               .parent_data = sys_parents,
> +               .num_parents = ARRAY_SIZE(sys_parents),
> +       },
> +};
> +
> +static struct clk_regmap sys_b_div = {
> +       .data = &(struct clk_regmap_div_data){
> +               .offset = SYS_CLK_CTRL0,
> +               .shift = 16,
> +               .width = 10,
> +       },
> +       .hw.init = &(struct clk_init_data){
> +               .name = "sys_b_div",
> +               .ops = &clk_regmap_divider_ops,
...but the sys_*_div aren't
Is this on purpose? If it is: why can the divider be changed at
runtime but the mux can't?

[...]
> +/*
> + * the index 2 is sys_pll_div16, it will be implemented in the CPU clock driver,
We need to add the "sys_pll_div16" input to the dt-bindings since they
should always describe the hardware (regardless of what the driver
implements currently).
I'm not sure how to manage this while we don't have the CPU clock
driver ready yet but I'm sure Rob or Krzysztof will be able to help us
here.

> + * the index 4 is the clock measurement source, it's not supported yet
I suspect that this comes from the clock measurer IP block and if so
the dt-bindings should probably describe this input. But again, we'd
need to keep it optional for now since our clock measurer driver
doesn't even implement a clock controller.

[...]
> +static struct clk_regmap pwm_a_sel = {
> +       .data = &(struct clk_regmap_mux_data){
> +               .offset = PWM_CLK_AB_CTRL,
> +               .mask = 0x1,
> +               .shift = 9,
> +       },
> +       .hw.init = &(struct clk_init_data){
> +               .name = "pwm_a_sel",
> +               .ops = &clk_regmap_mux_ops,
> +               .parent_data = pwm_abcd_parents,
> +               .num_parents = ARRAY_SIZE(pwm_abcd_parents),
> +               /* For more information, please refer to rtc clock */
> +               .flags = CLK_SET_RATE_NO_REPARENT,
As mentioned in [0] we'll work with Heiner to see if we can improve
the decision making process of the PWM controller driver so that we
can just have .flags = 0 here.
This applies to all other occurrences of the same comment about the rtc clock.


Best regards,
Martin
  
Dmitry Rokosov May 22, 2023, 1:32 p.m. UTC | #2
Hello Martin,

Thank you so much for the review, I really appreciate it!
Please find my comments below.

On Fri, May 19, 2023 at 11:03:54PM +0200, Martin Blumenstingl wrote:
> Hi Dmitry,
> 
> On Wed, May 17, 2023 at 3:33 PM Dmitry Rokosov <ddrokosov@sberdevices.ru> wrote:
> [...]
> > +static struct clk_regmap sys_b_sel = {
> > +       .data = &(struct clk_regmap_mux_data){
> > +               .offset = SYS_CLK_CTRL0,
> > +               .mask = 0x7,
> > +               .shift = 26,
> > +               .table = mux_table_sys,
> > +       },
> > +       .hw.init = &(struct clk_init_data){
> > +               .name = "sys_b_sel",
> > +               .ops = &clk_regmap_mux_ro_ops,
> the sys_*_sel muxes and sys_*_gate are _ro...
> 
> > +               .parent_data = sys_parents,
> > +               .num_parents = ARRAY_SIZE(sys_parents),
> > +       },
> > +};
> > +
> > +static struct clk_regmap sys_b_div = {
> > +       .data = &(struct clk_regmap_div_data){
> > +               .offset = SYS_CLK_CTRL0,
> > +               .shift = 16,
> > +               .width = 10,
> > +       },
> > +       .hw.init = &(struct clk_init_data){
> > +               .name = "sys_b_div",
> > +               .ops = &clk_regmap_divider_ops,
> ...but the sys_*_div aren't
> Is this on purpose? If it is: why can the divider be changed at
> runtime but the mux can't?
> 

Ah, that's a good catch. Since the system clock is set up by the BootROM
code, all sys_* dividers and gates should be read-only. I'll make sure
to change that in the next version.

> [...]
> > +/*
> > + * the index 2 is sys_pll_div16, it will be implemented in the CPU clock driver,
> We need to add the "sys_pll_div16" input to the dt-bindings since they
> should always describe the hardware (regardless of what the driver
> implements currently).
> I'm not sure how to manage this while we don't have the CPU clock
> driver ready yet but I'm sure Rob or Krzysztof will be able to help us
> here.
> 

I've shared my thoughts about it in the bindings thread. Please take a
look.

> > + * the index 4 is the clock measurement source, it's not supported yet
> I suspect that this comes from the clock measurer IP block and if so
> the dt-bindings should probably describe this input. But again, we'd
> need to keep it optional for now since our clock measurer driver
> doesn't even implement a clock controller.
> 

Indeed, this is a similar situation to what we have with the inputs and
clocks of the CPU and Audio clock controllers. It seems like there is
only one option here: we should mark it with a TODO tag...

> [...]
> > +static struct clk_regmap pwm_a_sel = {
> > +       .data = &(struct clk_regmap_mux_data){
> > +               .offset = PWM_CLK_AB_CTRL,
> > +               .mask = 0x1,
> > +               .shift = 9,
> > +       },
> > +       .hw.init = &(struct clk_init_data){
> > +               .name = "pwm_a_sel",
> > +               .ops = &clk_regmap_mux_ops,
> > +               .parent_data = pwm_abcd_parents,
> > +               .num_parents = ARRAY_SIZE(pwm_abcd_parents),
> > +               /* For more information, please refer to rtc clock */
> > +               .flags = CLK_SET_RATE_NO_REPARENT,
> As mentioned in [0] we'll work with Heiner to see if we can improve
> the decision making process of the PWM controller driver so that we
> can just have .flags = 0 here.
> This applies to all other occurrences of the same comment about the rtc clock.

Sure, I'll make the change in v16. In my opinion, we should remove the
CLK_SET_RATE_NO_REPARENT flag from all RTC related clock objects,
including PWM, regardless of the outcome of the Heiner discussion. Based
on our IRC talk, the decision has more pros than cons -
https://libera.irclog.whitequark.org/linux-amlogic/2023-05-18
  
Jerome Brunet May 30, 2023, 8:32 a.m. UTC | #3
On Mon 22 May 2023 at 16:32, Dmitry Rokosov <ddrokosov@sberdevices.ru> wrote:

> Hello Martin,
>
> Thank you so much for the review, I really appreciate it!
> Please find my comments below.
>
> On Fri, May 19, 2023 at 11:03:54PM +0200, Martin Blumenstingl wrote:
>> Hi Dmitry,
>> 
>> On Wed, May 17, 2023 at 3:33 PM Dmitry Rokosov <ddrokosov@sberdevices.ru> wrote:
>> [...]
>> > +static struct clk_regmap sys_b_sel = {
>> > +       .data = &(struct clk_regmap_mux_data){
>> > +               .offset = SYS_CLK_CTRL0,
>> > +               .mask = 0x7,
>> > +               .shift = 26,
>> > +               .table = mux_table_sys,
>> > +       },
>> > +       .hw.init = &(struct clk_init_data){
>> > +               .name = "sys_b_sel",
>> > +               .ops = &clk_regmap_mux_ro_ops,
>> the sys_*_sel muxes and sys_*_gate are _ro...
>> 
>> > +               .parent_data = sys_parents,
>> > +               .num_parents = ARRAY_SIZE(sys_parents),
>> > +       },
>> > +};
>> > +
>> > +static struct clk_regmap sys_b_div = {
>> > +       .data = &(struct clk_regmap_div_data){
>> > +               .offset = SYS_CLK_CTRL0,
>> > +               .shift = 16,
>> > +               .width = 10,
>> > +       },
>> > +       .hw.init = &(struct clk_init_data){
>> > +               .name = "sys_b_div",
>> > +               .ops = &clk_regmap_divider_ops,
>> ...but the sys_*_div aren't
>> Is this on purpose? If it is: why can the divider be changed at
>> runtime but the mux can't?
>> 
>
> Ah, that's a good catch. Since the system clock is set up by the BootROM
> code, all sys_* dividers and gates should be read-only. I'll make sure
> to change that in the next version.
>
>> [...]
>> > +/*
>> > + * the index 2 is sys_pll_div16, it will be implemented in the CPU clock driver,
>> We need to add the "sys_pll_div16" input to the dt-bindings since they
>> should always describe the hardware (regardless of what the driver
>> implements currently).
>> I'm not sure how to manage this while we don't have the CPU clock
>> driver ready yet but I'm sure Rob or Krzysztof will be able to help us
>> here.
>> 
>
> I've shared my thoughts about it in the bindings thread. Please take a
> look.
>
>> > + * the index 4 is the clock measurement source, it's not supported yet
>> I suspect that this comes from the clock measurer IP block and if so
>> the dt-bindings should probably describe this input. But again, we'd
>> need to keep it optional for now since our clock measurer driver
>> doesn't even implement a clock controller.
>> 
>
> Indeed, this is a similar situation to what we have with the inputs and
> clocks of the CPU and Audio clock controllers. It seems like there is
> only one option here: we should mark it with a TODO tag...
>
>> [...]
>> > +static struct clk_regmap pwm_a_sel = {
>> > +       .data = &(struct clk_regmap_mux_data){
>> > +               .offset = PWM_CLK_AB_CTRL,
>> > +               .mask = 0x1,
>> > +               .shift = 9,
>> > +       },
>> > +       .hw.init = &(struct clk_init_data){
>> > +               .name = "pwm_a_sel",
>> > +               .ops = &clk_regmap_mux_ops,
>> > +               .parent_data = pwm_abcd_parents,
>> > +               .num_parents = ARRAY_SIZE(pwm_abcd_parents),
>> > +               /* For more information, please refer to rtc clock */
>> > +               .flags = CLK_SET_RATE_NO_REPARENT,
>> As mentioned in [0] we'll work with Heiner to see if we can improve
>> the decision making process of the PWM controller driver so that we
>> can just have .flags = 0 here.
>> This applies to all other occurrences of the same comment about the rtc clock.
>
> Sure, I'll make the change in v16. In my opinion, we should remove the
> CLK_SET_RATE_NO_REPARENT flag from all RTC related clock objects,
> including PWM, regardless of the outcome of the Heiner discussion. Based
> on our IRC talk, the decision has more pros than cons -
> https://libera.irclog.whitequark.org/linux-amlogic/2023-05-18

The clock scheme of PWM could indeed be handled like audio is but it
not strictly required.

In audio we have a limited number of PLLs (root sources). There is a lot
more consummers than there is root sources. If the root sources rate is
not carefully chosen to statisfy all needs, we could end in a situation
where we can't satisfy all consummers or we must glitch the source to do
so.

For the PWM, I think (but I'm not 100% sure) that the main clock controller
provides a source for each PWM. No risk of race there. That is why AML
decided to completly ignore the clock element in the PWM IP, because
they can do almost everything with what is in the main controller ... Still
ignoring those part is wrong

For the RTC, If you want/need to handle external RTCs, I don't think you
have much of a choice. If both the internal and external *report* the
same rate, CCF can't really know if one is best. It will just pick one,
no necessarily the one you want. I don't really see a way around manual
selection for this.
  
Dmitry Rokosov May 30, 2023, 12:06 p.m. UTC | #4
Hello Jerome,

Thank you for the review!

On Tue, May 30, 2023 at 10:32:57AM +0200, Jerome Brunet wrote:
> 
> On Mon 22 May 2023 at 16:32, Dmitry Rokosov <ddrokosov@sberdevices.ru> wrote:
> 
> > Hello Martin,
> >
> > Thank you so much for the review, I really appreciate it!
> > Please find my comments below.
> >
> > On Fri, May 19, 2023 at 11:03:54PM +0200, Martin Blumenstingl wrote:
> >> Hi Dmitry,
> >> 
> >> On Wed, May 17, 2023 at 3:33 PM Dmitry Rokosov <ddrokosov@sberdevices.ru> wrote:
> >> [...]
> >> > +static struct clk_regmap sys_b_sel = {
> >> > +       .data = &(struct clk_regmap_mux_data){
> >> > +               .offset = SYS_CLK_CTRL0,
> >> > +               .mask = 0x7,
> >> > +               .shift = 26,
> >> > +               .table = mux_table_sys,
> >> > +       },
> >> > +       .hw.init = &(struct clk_init_data){
> >> > +               .name = "sys_b_sel",
> >> > +               .ops = &clk_regmap_mux_ro_ops,
> >> the sys_*_sel muxes and sys_*_gate are _ro...
> >> 
> >> > +               .parent_data = sys_parents,
> >> > +               .num_parents = ARRAY_SIZE(sys_parents),
> >> > +       },
> >> > +};
> >> > +
> >> > +static struct clk_regmap sys_b_div = {
> >> > +       .data = &(struct clk_regmap_div_data){
> >> > +               .offset = SYS_CLK_CTRL0,
> >> > +               .shift = 16,
> >> > +               .width = 10,
> >> > +       },
> >> > +       .hw.init = &(struct clk_init_data){
> >> > +               .name = "sys_b_div",
> >> > +               .ops = &clk_regmap_divider_ops,
> >> ...but the sys_*_div aren't
> >> Is this on purpose? If it is: why can the divider be changed at
> >> runtime but the mux can't?
> >> 
> >
> > Ah, that's a good catch. Since the system clock is set up by the BootROM
> > code, all sys_* dividers and gates should be read-only. I'll make sure
> > to change that in the next version.
> >
> >> [...]
> >> > +/*
> >> > + * the index 2 is sys_pll_div16, it will be implemented in the CPU clock driver,
> >> We need to add the "sys_pll_div16" input to the dt-bindings since they
> >> should always describe the hardware (regardless of what the driver
> >> implements currently).
> >> I'm not sure how to manage this while we don't have the CPU clock
> >> driver ready yet but I'm sure Rob or Krzysztof will be able to help us
> >> here.
> >> 
> >
> > I've shared my thoughts about it in the bindings thread. Please take a
> > look.
> >
> >> > + * the index 4 is the clock measurement source, it's not supported yet
> >> I suspect that this comes from the clock measurer IP block and if so
> >> the dt-bindings should probably describe this input. But again, we'd
> >> need to keep it optional for now since our clock measurer driver
> >> doesn't even implement a clock controller.
> >> 
> >
> > Indeed, this is a similar situation to what we have with the inputs and
> > clocks of the CPU and Audio clock controllers. It seems like there is
> > only one option here: we should mark it with a TODO tag...
> >
> >> [...]
> >> > +static struct clk_regmap pwm_a_sel = {
> >> > +       .data = &(struct clk_regmap_mux_data){
> >> > +               .offset = PWM_CLK_AB_CTRL,
> >> > +               .mask = 0x1,
> >> > +               .shift = 9,
> >> > +       },
> >> > +       .hw.init = &(struct clk_init_data){
> >> > +               .name = "pwm_a_sel",
> >> > +               .ops = &clk_regmap_mux_ops,
> >> > +               .parent_data = pwm_abcd_parents,
> >> > +               .num_parents = ARRAY_SIZE(pwm_abcd_parents),
> >> > +               /* For more information, please refer to rtc clock */
> >> > +               .flags = CLK_SET_RATE_NO_REPARENT,
> >> As mentioned in [0] we'll work with Heiner to see if we can improve
> >> the decision making process of the PWM controller driver so that we
> >> can just have .flags = 0 here.
> >> This applies to all other occurrences of the same comment about the rtc clock.
> >
> > Sure, I'll make the change in v16. In my opinion, we should remove the
> > CLK_SET_RATE_NO_REPARENT flag from all RTC related clock objects,
> > including PWM, regardless of the outcome of the Heiner discussion. Based
> > on our IRC talk, the decision has more pros than cons -
> > https://libera.irclog.whitequark.org/linux-amlogic/2023-05-18
> 
> The clock scheme of PWM could indeed be handled like audio is but it
> not strictly required.
> 
> In audio we have a limited number of PLLs (root sources). There is a lot
> more consummers than there is root sources. If the root sources rate is
> not carefully chosen to statisfy all needs, we could end in a situation
> where we can't satisfy all consummers or we must glitch the source to do
> so.
> 
> For the PWM, I think (but I'm not 100% sure) that the main clock controller
> provides a source for each PWM. No risk of race there. That is why AML
> decided to completly ignore the clock element in the PWM IP, because
> they can do almost everything with what is in the main controller ... Still
> ignoring those part is wrong
> 
> For the RTC, If you want/need to handle external RTCs, I don't think you
> have much of a choice. If both the internal and external *report* the
> same rate, CCF can't really know if one is best. It will just pick one,
> no necessarily the one you want. I don't really see a way around manual
> selection for this.
> 

Per my understading, the rtc32k Amlogic clock is an internal clock and
cannot be an external one. Amlogic has provided it as an internal 32k
stable clock with low jitter.

You're absolutely right that there is no data available to confirm the
choice of an external RTC clock in the CCF. However, as per the approach
we discussed with Martin and Heiner, we can still use the RTC clock as a
parent for PWM in the current implementation. If the parent clock
already has 32k, we do not change the rate from the PWM driver. The
benefit of this approach is that reparenting is still available, but the
PWM child cannot change the RTC frequency; it simply uses the
appropriate parent clock. Additionally, if the parent is already set to
rtc32k, we shouldn't change it.
  

Patch

diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 693c4cf60f27..8ce846fdbe43 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -109,6 +109,16 @@  config COMMON_CLK_A1_PLL
 	  device, A1 SoC Family. Say Y if you want A1 PLL clock controller
 	  to work.
 
+config COMMON_CLK_A1_PERIPHERALS
+	tristate "Amlogic A1 SoC Peripherals clock controller support"
+	depends on ARM64
+	select COMMON_CLK_MESON_DUALDIV
+	select COMMON_CLK_MESON_REGMAP
+	help
+	  Support for the Peripherals clock controller on Amlogic A113L based
+	  device, A1 SoC Family. Say Y if you want A1 Peripherals clock
+	  controller to work.
+
 config COMMON_CLK_G12A
 	tristate "G12 and SM1 SoC clock controllers support"
 	depends on ARM64
diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
index 2f17f475a48f..d5288662881d 100644
--- a/drivers/clk/meson/Makefile
+++ b/drivers/clk/meson/Makefile
@@ -17,6 +17,7 @@  obj-$(CONFIG_COMMON_CLK_MESON_VID_PLL_DIV) += vid-pll-div.o
 obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
 obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
 obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
+obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
 obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
 obj-$(CONFIG_COMMON_CLK_G12A) += g12a.o g12a-aoclk.o
 obj-$(CONFIG_COMMON_CLK_MESON8B) += meson8b.o meson8-ddr.o
diff --git a/drivers/clk/meson/a1-peripherals.c b/drivers/clk/meson/a1-peripherals.c
new file mode 100644
index 000000000000..5e7a37cbbb88
--- /dev/null
+++ b/drivers/clk/meson/a1-peripherals.c
@@ -0,0 +1,2273 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ *
+ * Copyright (c) 2023, SberDevices. All Rights Reserved.
+ * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "a1-peripherals.h"
+#include "clk-dualdiv.h"
+#include "clk-regmap.h"
+
+static struct clk_regmap xtal_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 0,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "xtal_in",
+		.ops = &clk_regmap_gate_ro_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap fixpll_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 1,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "fixpll_in",
+		.ops = &clk_regmap_gate_ro_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap usb_phy_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 2,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "usb_phy_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap usb_ctrl_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 3,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "usb_ctrl_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap hifipll_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 4,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "hifipll_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap syspll_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 5,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "syspll_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap dds_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_OSCIN_CTRL,
+		.bit_idx = 6,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dds_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap rtc_32k_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = RTC_BY_OSCIN_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "rtc_32k_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static const struct meson_clk_dualdiv_param clk_32k_div_table[] = {
+	{
+		.dual		= 1,
+		.n1		= 733,
+		.m1		= 8,
+		.n2		= 732,
+		.m2		= 11,
+	},
+	{}
+};
+
+static struct clk_regmap rtc_32k_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = RTC_BY_OSCIN_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = RTC_BY_OSCIN_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = RTC_BY_OSCIN_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = clk_32k_div_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "rtc_32k_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap rtc_32k_xtal = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = RTC_BY_OSCIN_CTRL1,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "rtc_32k_xtal",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap rtc_32k_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = RTC_CTRL,
+		.mask = 0x3,
+		.shift = 0,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "rtc_32k_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_xtal.hw,
+			&rtc_32k_div.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/*
+ * All clocks that can be inherited from a more accurate RTC clock are marked
+ * with the CLK_SET_RATE_NO_REPARENT flag. This is because in certain
+ * situations, we may need to freeze their parent. The parent setup of these
+ * clocks should be located on the device tree side.
+ */
+struct clk_regmap rtc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = RTC_BY_OSCIN_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "rtc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&rtc_32k_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static u32 mux_table_sys[] = { 0, 1, 2, 3, 7 };
+static const struct clk_parent_data sys_parents[] = {
+	{ .fw_name = "xtal" },
+	{ .fw_name = "fclk_div2" },
+	{ .fw_name = "fclk_div3" },
+	{ .fw_name = "fclk_div5" },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap sys_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SYS_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 26,
+		.table = mux_table_sys,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_b_sel",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_data = sys_parents,
+		.num_parents = ARRAY_SIZE(sys_parents),
+	},
+};
+
+static struct clk_regmap sys_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SYS_CLK_CTRL0,
+		.shift = 16,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_CLK_CTRL0,
+		.bit_idx = 29,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sys_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SYS_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 10,
+		.table = mux_table_sys,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_a_sel",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_data = sys_parents,
+		.num_parents = ARRAY_SIZE(sys_parents),
+	},
+};
+
+static struct clk_regmap sys_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SYS_CLK_CTRL0,
+		.shift = 0,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SYS_CLK_CTRL0,
+		.bit_idx = 13,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sys_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sys = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SYS_CLK_CTRL0,
+		.mask = 0x1,
+		.shift = 31,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys",
+		.ops = &clk_regmap_mux_ro_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sys_a.hw,
+			&sys_b.hw,
+		},
+		.num_parents = 2,
+		/*
+		 * This clock is used by APB bus which is set in boot ROM code
+		 * and is required by the platform to operate correctly.
+		 * Until the following condition are met, we need this clock to
+		 * be marked as critical:
+		 * a) Mark the clock used by a firmware resource, if possible
+		 * b) CCF has a clock hand-off mechanism to make the sure the
+		 *    clock stays on until the proper driver comes along
+		 */
+		.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+	},
+};
+
+static u32 mux_table_dsp_ab[] = { 0, 1, 2, 3, 4, 7 };
+static const struct clk_parent_data dsp_ab_parent_data[] = {
+	{ .fw_name = "xtal", },
+	{ .fw_name = "fclk_div2", },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+	{ .fw_name = "hifi_pll", },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap dspa_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPA_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 10,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_a_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspa_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPA_CLK_CTRL0,
+		.shift = 0,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_CTRL0,
+		.bit_idx = 13,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPA_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 26,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_b_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspa_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPA_CLK_CTRL0,
+		.shift = 16,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_CTRL0,
+		.bit_idx = 29,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPA_CLK_CTRL0,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspa_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_a.hw,
+			&dspa_b.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_en = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_EN,
+		.bit_idx = 1,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_en",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspa_en_nic = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPA_CLK_EN,
+		.bit_idx = 0,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspa_en_nic",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspa_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPB_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 10,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_a_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspb_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPB_CLK_CTRL0,
+		.shift = 0,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_CTRL0,
+		.bit_idx = 13,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPB_CLK_CTRL0,
+		.mask = 0x7,
+		.shift = 26,
+		.table = mux_table_dsp_ab,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_b_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = dsp_ab_parent_data,
+		.num_parents = ARRAY_SIZE(dsp_ab_parent_data),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap dspb_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DSPB_CLK_CTRL0,
+		.shift = 16,
+		.width = 10,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_CTRL0,
+		.bit_idx = 29,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DSPB_CLK_CTRL0,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dspb_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_a.hw,
+			&dspb_b.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_en = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_EN,
+		.bit_idx = 1,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_en",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dspb_en_nic = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DSPB_CLK_EN,
+		.bit_idx = 0,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dspb_en_nic",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dspb_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap clk_24m = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CLK12_24_CTRL,
+		.bit_idx = 11,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "24m",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_fixed_factor clk_24m_div2 = {
+	.mult = 1,
+	.div = 2,
+	.hw.init = &(struct clk_init_data){
+		.name = "24m_div2",
+		.ops = &clk_fixed_factor_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&clk_24m.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap clk_12m = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CLK12_24_CTRL,
+		.bit_idx = 10,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "12m",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&clk_24m_div2.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap fclk_div2_divn_pre = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = CLK12_24_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2_divn_pre",
+		.ops = &clk_regmap_divider_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "fclk_div2",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap fclk_div2_divn = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CLK12_24_CTRL,
+		.bit_idx = 12,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "fclk_div2_divn",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&fclk_div2_divn_pre.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/*
+ * the index 2 is sys_pll_div16, it will be implemented in the CPU clock driver,
+ * the index 4 is the clock measurement source, it's not supported yet
+ */
+static u32 gen_table[] = { 0, 1, 3, 5, 6, 7, 8 };
+static const struct clk_parent_data gen_parent_data[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &rtc.hw },
+	{ .fw_name = "hifi_pll", },
+	{ .fw_name = "fclk_div2", },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+	{ .fw_name = "fclk_div7", },
+};
+
+static struct clk_regmap gen_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = GEN_CLK_CTRL,
+		.mask = 0xf,
+		.shift = 12,
+		.table = gen_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gen_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = gen_parent_data,
+		.num_parents = ARRAY_SIZE(gen_parent_data),
+		/*
+		 * The GEN clock can be connected to an external pad, so it
+		 * may be set up directly from the device tree. Additionally,
+		 * the GEN clock can be inherited from a more accurate RTC
+		 * clock, so in certain situations, it may be necessary
+		 * to freeze its parent.
+		 */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap gen_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = GEN_CLK_CTRL,
+		.shift = 0,
+		.width = 11,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "gen_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&gen_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap gen = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = GEN_CLK_CTRL,
+		.bit_idx = 11,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "gen",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&gen_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap saradc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SAR_ADC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "saradc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .fw_name = "xtal", },
+			{ .hw = &sys.hw, },
+		},
+		.num_parents = 2,
+	},
+};
+
+static struct clk_regmap saradc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SAR_ADC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "saradc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&saradc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap saradc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SAR_ADC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "saradc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&saradc_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data pwm_abcd_parents[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &sys.hw },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap pwm_a_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.mask = 0x1,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_a_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_a_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_a_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_a_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_a = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_a",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_a_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_b_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.mask = 0x1,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_b_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_b_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.shift = 16,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_b_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_b_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_b = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_AB_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_b",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_b_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_c_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.mask = 0x1,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_c_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_c_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_c_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_c_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_c = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_c",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_c_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_d_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.mask = 0x1,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_d_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_abcd_parents,
+		.num_parents = ARRAY_SIZE(pwm_abcd_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_d_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.shift = 16,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_d_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_d_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_d = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_CD_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_d",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_d_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data pwm_ef_parents[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &sys.hw },
+	{ .fw_name = "fclk_div5", },
+	{ .hw = &rtc.hw },
+};
+
+static struct clk_regmap pwm_e_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_e_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_ef_parents,
+		.num_parents = ARRAY_SIZE(pwm_ef_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_e_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_e_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_e_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_e = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_e",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_e_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_f_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.mask = 0x3,
+		.shift = 25,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_f_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = pwm_ef_parents,
+		.num_parents = ARRAY_SIZE(pwm_ef_parents),
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap pwm_f_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.shift = 16,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "pwm_f_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_f_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap pwm_f = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PWM_CLK_EF_CTRL,
+		.bit_idx = 24,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "pwm_f",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&pwm_f_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+/*
+ * spicc clk
+ *   fdiv2   |\         |\       _____
+ *  ---------| |---DIV--| |     |     |    spicc out
+ *  ---------| |        | |-----|GATE |---------
+ *     ..... |/         | /     |_____|
+ *  --------------------|/
+ *                 24M
+ */
+static const struct clk_parent_data spicc_spifc_parents[] = {
+	{ .fw_name = "fclk_div2"},
+	{ .fw_name = "fclk_div3"},
+	{ .fw_name = "fclk_div5"},
+	{ .fw_name = "hifi_pll" },
+};
+
+static struct clk_regmap spicc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPICC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_spifc_parents,
+		.num_parents = ARRAY_SIZE(spicc_spifc_parents),
+	},
+};
+
+static struct clk_regmap spicc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SPICC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spicc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spicc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPICC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &spicc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spicc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SPICC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spicc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spicc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap ts_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = TS_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ts_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap ts = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = TS_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ts",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ts_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spifc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPIFC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spifc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_spifc_parents,
+		.num_parents = ARRAY_SIZE(spicc_spifc_parents),
+	},
+};
+
+static struct clk_regmap spifc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SPIFC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spifc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spifc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spifc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SPIFC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spifc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &spifc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap spifc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SPIFC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "spifc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&spifc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data usb_bus_parents[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &sys.hw },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+};
+
+static struct clk_regmap usb_bus_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = USB_BUSCLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "usb_bus_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = usb_bus_parents,
+		.num_parents = ARRAY_SIZE(usb_bus_parents),
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap usb_bus_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = USB_BUSCLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "usb_bus_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&usb_bus_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap usb_bus = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = USB_BUSCLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "usb_bus",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&usb_bus_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static const struct clk_parent_data sd_emmc_psram_dmc_parents[] = {
+	{ .fw_name = "fclk_div2", },
+	{ .fw_name = "fclk_div3", },
+	{ .fw_name = "fclk_div5", },
+	{ .fw_name = "hifi_pll", },
+};
+
+static struct clk_regmap sd_emmc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = sd_emmc_psram_dmc_parents,
+		.num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents),
+	},
+};
+
+static struct clk_regmap sd_emmc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sd_emmc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sd_emmc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sd_emmc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &sd_emmc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap sd_emmc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = SD_EMMC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "sd_emmc",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&sd_emmc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap psram_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PSRAM_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "psram_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = sd_emmc_psram_dmc_parents,
+		.num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents),
+	},
+};
+
+static struct clk_regmap psram_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = PSRAM_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "psram_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&psram_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap psram_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = PSRAM_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "psram_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &psram_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap psram = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = PSRAM_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "psram",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&psram_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dmc_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DMC_CLK_CTRL,
+		.mask = 0x3,
+		.shift = 9,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dmc_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = sd_emmc_psram_dmc_parents,
+		.num_parents = ARRAY_SIZE(sd_emmc_psram_dmc_parents),
+	},
+};
+
+static struct clk_regmap dmc_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = DMC_CLK_CTRL,
+		.shift = 0,
+		.width = 8,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dmc_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dmc_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dmc_sel2 = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = DMC_CLK_CTRL,
+		.mask = 0x1,
+		.shift = 15,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "dmc_sel2",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = (const struct clk_parent_data []) {
+			{ .hw = &dmc_div.hw },
+			{ .fw_name = "xtal", },
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap dmc = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = DMC_CLK_CTRL,
+		.bit_idx = 8,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "dmc",
+		.ops = &clk_regmap_gate_ro_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&dmc_sel2.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap ceca_32k_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECA_CLK_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "ceca_32k_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap ceca_32k_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = CECA_CLK_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = CECA_CLK_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = CECA_CLK_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = CECA_CLK_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = CECA_CLK_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = clk_32k_div_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap ceca_32k_sel_pre = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECA_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 24,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_sel_pre",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_div.hw,
+			&ceca_32k_in.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap ceca_32k_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECA_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 31,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_sel_pre.hw,
+			&rtc.hw,
+		},
+		.num_parents = 2,
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap ceca_32k_out = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECA_CLK_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "ceca_32k_out",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&ceca_32k_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap cecb_32k_in = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECB_CLK_CTRL0,
+		.bit_idx = 31,
+	},
+	.hw.init = &(struct clk_init_data) {
+		.name = "cecb_32k_in",
+		.ops = &clk_regmap_gate_ops,
+		.parent_data = &(const struct clk_parent_data) {
+			.fw_name = "xtal",
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap cecb_32k_div = {
+	.data = &(struct meson_clk_dualdiv_data){
+		.n1 = {
+			.reg_off = CECB_CLK_CTRL0,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.n2 = {
+			.reg_off = CECB_CLK_CTRL0,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.m1 = {
+			.reg_off = CECB_CLK_CTRL1,
+			.shift   = 0,
+			.width   = 12,
+		},
+		.m2 = {
+			.reg_off = CECB_CLK_CTRL1,
+			.shift   = 12,
+			.width   = 12,
+		},
+		.dual = {
+			.reg_off = CECB_CLK_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.table = clk_32k_div_table,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_div",
+		.ops = &meson_clk_dualdiv_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_in.hw
+		},
+		.num_parents = 1,
+	},
+};
+
+static struct clk_regmap cecb_32k_sel_pre = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECB_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 24,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_sel_pre",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_div.hw,
+			&cecb_32k_in.hw,
+		},
+		.num_parents = 2,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap cecb_32k_sel = {
+	.data = &(struct clk_regmap_mux_data) {
+		.offset = CECB_CLK_CTRL1,
+		.mask = 0x1,
+		.shift = 31,
+		.flags = CLK_MUX_ROUND_CLOSEST,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_sel_pre.hw,
+			&rtc.hw,
+		},
+		.num_parents = 2,
+		/* For more information, please refer to rtc clock */
+		.flags = CLK_SET_RATE_NO_REPARENT,
+	},
+};
+
+static struct clk_regmap cecb_32k_out = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = CECB_CLK_CTRL0,
+		.bit_idx = 30,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "cecb_32k_out",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&cecb_32k_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+#define MESON_GATE(_name, _reg, _bit) \
+	MESON_PCLK(_name, _reg, _bit, &sys.hw)
+
+static MESON_GATE(clktree,	SYS_CLK_EN0,	0);
+static MESON_GATE(reset_ctrl,	SYS_CLK_EN0,	1);
+static MESON_GATE(analog_ctrl,	SYS_CLK_EN0,	2);
+static MESON_GATE(pwr_ctrl,	SYS_CLK_EN0,	3);
+static MESON_GATE(pad_ctrl,	SYS_CLK_EN0,	4);
+static MESON_GATE(sys_ctrl,	SYS_CLK_EN0,	5);
+static MESON_GATE(temp_sensor,	SYS_CLK_EN0,	6);
+static MESON_GATE(am2axi_dev,	SYS_CLK_EN0,	7);
+static MESON_GATE(spicc_b,	SYS_CLK_EN0,	8);
+static MESON_GATE(spicc_a,	SYS_CLK_EN0,	9);
+static MESON_GATE(msr,		SYS_CLK_EN0,	10);
+static MESON_GATE(audio,	SYS_CLK_EN0,	11);
+static MESON_GATE(jtag_ctrl,	SYS_CLK_EN0,	12);
+static MESON_GATE(saradc_en,	SYS_CLK_EN0,	13);
+static MESON_GATE(pwm_ef,	SYS_CLK_EN0,	14);
+static MESON_GATE(pwm_cd,	SYS_CLK_EN0,	15);
+static MESON_GATE(pwm_ab,	SYS_CLK_EN0,	16);
+static MESON_GATE(cec,		SYS_CLK_EN0,	17);
+static MESON_GATE(i2c_s,	SYS_CLK_EN0,	18);
+static MESON_GATE(ir_ctrl,	SYS_CLK_EN0,	19);
+static MESON_GATE(i2c_m_d,	SYS_CLK_EN0,	20);
+static MESON_GATE(i2c_m_c,	SYS_CLK_EN0,	21);
+static MESON_GATE(i2c_m_b,	SYS_CLK_EN0,	22);
+static MESON_GATE(i2c_m_a,	SYS_CLK_EN0,	23);
+static MESON_GATE(acodec,	SYS_CLK_EN0,	24);
+static MESON_GATE(otp,		SYS_CLK_EN0,	25);
+static MESON_GATE(sd_emmc_a,	SYS_CLK_EN0,	26);
+static MESON_GATE(usb_phy,	SYS_CLK_EN0,	27);
+static MESON_GATE(usb_ctrl,	SYS_CLK_EN0,	28);
+static MESON_GATE(sys_dspb,	SYS_CLK_EN0,	29);
+static MESON_GATE(sys_dspa,	SYS_CLK_EN0,	30);
+static MESON_GATE(dma,		SYS_CLK_EN0,	31);
+static MESON_GATE(irq_ctrl,	SYS_CLK_EN1,	0);
+static MESON_GATE(nic,		SYS_CLK_EN1,	1);
+static MESON_GATE(gic,		SYS_CLK_EN1,	2);
+static MESON_GATE(uart_c,	SYS_CLK_EN1,	3);
+static MESON_GATE(uart_b,	SYS_CLK_EN1,	4);
+static MESON_GATE(uart_a,	SYS_CLK_EN1,	5);
+static MESON_GATE(sys_psram,	SYS_CLK_EN1,	6);
+static MESON_GATE(rsa,		SYS_CLK_EN1,	8);
+static MESON_GATE(coresight,	SYS_CLK_EN1,	9);
+static MESON_GATE(am2axi_vad,	AXI_CLK_EN,	0);
+static MESON_GATE(audio_vad,	AXI_CLK_EN,	1);
+static MESON_GATE(axi_dmc,	AXI_CLK_EN,	3);
+static MESON_GATE(axi_psram,	AXI_CLK_EN,	4);
+static MESON_GATE(ramb,		AXI_CLK_EN,	5);
+static MESON_GATE(rama,		AXI_CLK_EN,	6);
+static MESON_GATE(axi_spifc,	AXI_CLK_EN,	7);
+static MESON_GATE(axi_nic,	AXI_CLK_EN,	8);
+static MESON_GATE(axi_dma,	AXI_CLK_EN,	9);
+static MESON_GATE(cpu_ctrl,	AXI_CLK_EN,	10);
+static MESON_GATE(rom,		AXI_CLK_EN,	11);
+static MESON_GATE(prod_i2c,	AXI_CLK_EN,	12);
+
+/* Array of all clocks registered by this provider */
+static struct clk_hw_onecell_data a1_periphs_clks = {
+	.hws = {
+		[CLKID_XTAL_IN]			= &xtal_in.hw,
+		[CLKID_FIXPLL_IN]		= &fixpll_in.hw,
+		[CLKID_USB_PHY_IN]		= &usb_phy_in.hw,
+		[CLKID_USB_CTRL_IN]		= &usb_ctrl_in.hw,
+		[CLKID_HIFIPLL_IN]		= &hifipll_in.hw,
+		[CLKID_SYSPLL_IN]		= &syspll_in.hw,
+		[CLKID_DDS_IN]			= &dds_in.hw,
+		[CLKID_SYS]			= &sys.hw,
+		[CLKID_CLKTREE]			= &clktree.hw,
+		[CLKID_RESET_CTRL]		= &reset_ctrl.hw,
+		[CLKID_ANALOG_CTRL]		= &analog_ctrl.hw,
+		[CLKID_PWR_CTRL]		= &pwr_ctrl.hw,
+		[CLKID_PAD_CTRL]		= &pad_ctrl.hw,
+		[CLKID_SYS_CTRL]		= &sys_ctrl.hw,
+		[CLKID_TEMP_SENSOR]		= &temp_sensor.hw,
+		[CLKID_AM2AXI_DIV]		= &am2axi_dev.hw,
+		[CLKID_SPICC_B]			= &spicc_b.hw,
+		[CLKID_SPICC_A]			= &spicc_a.hw,
+		[CLKID_MSR]			= &msr.hw,
+		[CLKID_AUDIO]			= &audio.hw,
+		[CLKID_JTAG_CTRL]		= &jtag_ctrl.hw,
+		[CLKID_SARADC_EN]		= &saradc_en.hw,
+		[CLKID_PWM_EF]			= &pwm_ef.hw,
+		[CLKID_PWM_CD]			= &pwm_cd.hw,
+		[CLKID_PWM_AB]			= &pwm_ab.hw,
+		[CLKID_CEC]			= &cec.hw,
+		[CLKID_I2C_S]			= &i2c_s.hw,
+		[CLKID_IR_CTRL]			= &ir_ctrl.hw,
+		[CLKID_I2C_M_D]			= &i2c_m_d.hw,
+		[CLKID_I2C_M_C]			= &i2c_m_c.hw,
+		[CLKID_I2C_M_B]			= &i2c_m_b.hw,
+		[CLKID_I2C_M_A]			= &i2c_m_a.hw,
+		[CLKID_ACODEC]			= &acodec.hw,
+		[CLKID_OTP]			= &otp.hw,
+		[CLKID_SD_EMMC_A]		= &sd_emmc_a.hw,
+		[CLKID_USB_PHY]			= &usb_phy.hw,
+		[CLKID_USB_CTRL]		= &usb_ctrl.hw,
+		[CLKID_SYS_DSPB]		= &sys_dspb.hw,
+		[CLKID_SYS_DSPA]		= &sys_dspa.hw,
+		[CLKID_DMA]			= &dma.hw,
+		[CLKID_IRQ_CTRL]		= &irq_ctrl.hw,
+		[CLKID_NIC]			= &nic.hw,
+		[CLKID_GIC]			= &gic.hw,
+		[CLKID_UART_C]			= &uart_c.hw,
+		[CLKID_UART_B]			= &uart_b.hw,
+		[CLKID_UART_A]			= &uart_a.hw,
+		[CLKID_SYS_PSRAM]		= &sys_psram.hw,
+		[CLKID_RSA]			= &rsa.hw,
+		[CLKID_CORESIGHT]		= &coresight.hw,
+		[CLKID_AM2AXI_VAD]		= &am2axi_vad.hw,
+		[CLKID_AUDIO_VAD]		= &audio_vad.hw,
+		[CLKID_AXI_DMC]			= &axi_dmc.hw,
+		[CLKID_AXI_PSRAM]		= &axi_psram.hw,
+		[CLKID_RAMB]			= &ramb.hw,
+		[CLKID_RAMA]			= &rama.hw,
+		[CLKID_AXI_SPIFC]		= &axi_spifc.hw,
+		[CLKID_AXI_NIC]			= &axi_nic.hw,
+		[CLKID_AXI_DMA]			= &axi_dma.hw,
+		[CLKID_CPU_CTRL]		= &cpu_ctrl.hw,
+		[CLKID_ROM]			= &rom.hw,
+		[CLKID_PROC_I2C]		= &prod_i2c.hw,
+		[CLKID_DSPA_SEL]		= &dspa_sel.hw,
+		[CLKID_DSPB_SEL]		= &dspb_sel.hw,
+		[CLKID_DSPA_EN]			= &dspa_en.hw,
+		[CLKID_DSPA_EN_NIC]		= &dspa_en_nic.hw,
+		[CLKID_DSPB_EN]			= &dspb_en.hw,
+		[CLKID_DSPB_EN_NIC]		= &dspb_en_nic.hw,
+		[CLKID_RTC]			= &rtc.hw,
+		[CLKID_CECA_32K]		= &ceca_32k_out.hw,
+		[CLKID_CECB_32K]		= &cecb_32k_out.hw,
+		[CLKID_24M]			= &clk_24m.hw,
+		[CLKID_12M]			= &clk_12m.hw,
+		[CLKID_FCLK_DIV2_DIVN]		= &fclk_div2_divn.hw,
+		[CLKID_GEN]			= &gen.hw,
+		[CLKID_SARADC_SEL]		= &saradc_sel.hw,
+		[CLKID_SARADC]			= &saradc.hw,
+		[CLKID_PWM_A]			= &pwm_a.hw,
+		[CLKID_PWM_B]			= &pwm_b.hw,
+		[CLKID_PWM_C]			= &pwm_c.hw,
+		[CLKID_PWM_D]			= &pwm_d.hw,
+		[CLKID_PWM_E]			= &pwm_e.hw,
+		[CLKID_PWM_F]			= &pwm_f.hw,
+		[CLKID_SPICC]			= &spicc.hw,
+		[CLKID_TS]			= &ts.hw,
+		[CLKID_SPIFC]			= &spifc.hw,
+		[CLKID_USB_BUS]			= &usb_bus.hw,
+		[CLKID_SD_EMMC]			= &sd_emmc.hw,
+		[CLKID_PSRAM]			= &psram.hw,
+		[CLKID_DMC]			= &dmc.hw,
+		[CLKID_SYS_A_SEL]		= &sys_a_sel.hw,
+		[CLKID_SYS_A_DIV]		= &sys_a_div.hw,
+		[CLKID_SYS_A]			= &sys_a.hw,
+		[CLKID_SYS_B_SEL]		= &sys_b_sel.hw,
+		[CLKID_SYS_B_DIV]		= &sys_b_div.hw,
+		[CLKID_SYS_B]			= &sys_b.hw,
+		[CLKID_DSPA_A_SEL]		= &dspa_a_sel.hw,
+		[CLKID_DSPA_A_DIV]		= &dspa_a_div.hw,
+		[CLKID_DSPA_A]			= &dspa_a.hw,
+		[CLKID_DSPA_B_SEL]		= &dspa_b_sel.hw,
+		[CLKID_DSPA_B_DIV]		= &dspa_b_div.hw,
+		[CLKID_DSPA_B]			= &dspa_b.hw,
+		[CLKID_DSPB_A_SEL]		= &dspb_a_sel.hw,
+		[CLKID_DSPB_A_DIV]		= &dspb_a_div.hw,
+		[CLKID_DSPB_A]			= &dspb_a.hw,
+		[CLKID_DSPB_B_SEL]		= &dspb_b_sel.hw,
+		[CLKID_DSPB_B_DIV]		= &dspb_b_div.hw,
+		[CLKID_DSPB_B]			= &dspb_b.hw,
+		[CLKID_RTC_32K_IN]		= &rtc_32k_in.hw,
+		[CLKID_RTC_32K_DIV]		= &rtc_32k_div.hw,
+		[CLKID_RTC_32K_XTAL]		= &rtc_32k_xtal.hw,
+		[CLKID_RTC_32K_SEL]		= &rtc_32k_sel.hw,
+		[CLKID_CECB_32K_IN]		= &cecb_32k_in.hw,
+		[CLKID_CECB_32K_DIV]		= &cecb_32k_div.hw,
+		[CLKID_CECB_32K_SEL_PRE]	= &cecb_32k_sel_pre.hw,
+		[CLKID_CECB_32K_SEL]		= &cecb_32k_sel.hw,
+		[CLKID_CECA_32K_IN]		= &ceca_32k_in.hw,
+		[CLKID_CECA_32K_DIV]		= &ceca_32k_div.hw,
+		[CLKID_CECA_32K_SEL_PRE]	= &ceca_32k_sel_pre.hw,
+		[CLKID_CECA_32K_SEL]		= &ceca_32k_sel.hw,
+		[CLKID_DIV2_PRE]		= &fclk_div2_divn_pre.hw,
+		[CLKID_24M_DIV2]		= &clk_24m_div2.hw,
+		[CLKID_GEN_SEL]			= &gen_sel.hw,
+		[CLKID_GEN_DIV]			= &gen_div.hw,
+		[CLKID_SARADC_DIV]		= &saradc_div.hw,
+		[CLKID_PWM_A_SEL]		= &pwm_a_sel.hw,
+		[CLKID_PWM_A_DIV]		= &pwm_a_div.hw,
+		[CLKID_PWM_B_SEL]		= &pwm_b_sel.hw,
+		[CLKID_PWM_B_DIV]		= &pwm_b_div.hw,
+		[CLKID_PWM_C_SEL]		= &pwm_c_sel.hw,
+		[CLKID_PWM_C_DIV]		= &pwm_c_div.hw,
+		[CLKID_PWM_D_SEL]		= &pwm_d_sel.hw,
+		[CLKID_PWM_D_DIV]		= &pwm_d_div.hw,
+		[CLKID_PWM_E_SEL]		= &pwm_e_sel.hw,
+		[CLKID_PWM_E_DIV]		= &pwm_e_div.hw,
+		[CLKID_PWM_F_SEL]		= &pwm_f_sel.hw,
+		[CLKID_PWM_F_DIV]		= &pwm_f_div.hw,
+		[CLKID_SPICC_SEL]		= &spicc_sel.hw,
+		[CLKID_SPICC_DIV]		= &spicc_div.hw,
+		[CLKID_SPICC_SEL2]		= &spicc_sel2.hw,
+		[CLKID_TS_DIV]			= &ts_div.hw,
+		[CLKID_SPIFC_SEL]		= &spifc_sel.hw,
+		[CLKID_SPIFC_DIV]		= &spifc_div.hw,
+		[CLKID_SPIFC_SEL2]		= &spifc_sel2.hw,
+		[CLKID_USB_BUS_SEL]		= &usb_bus_sel.hw,
+		[CLKID_USB_BUS_DIV]		= &usb_bus_div.hw,
+		[CLKID_SD_EMMC_SEL]		= &sd_emmc_sel.hw,
+		[CLKID_SD_EMMC_DIV]		= &sd_emmc_div.hw,
+		[CLKID_SD_EMMC_SEL2]		= &sd_emmc_sel2.hw,
+		[CLKID_PSRAM_SEL]		= &psram_sel.hw,
+		[CLKID_PSRAM_DIV]		= &psram_div.hw,
+		[CLKID_PSRAM_SEL2]		= &psram_sel2.hw,
+		[CLKID_DMC_SEL]			= &dmc_sel.hw,
+		[CLKID_DMC_DIV]			= &dmc_div.hw,
+		[CLKID_DMC_SEL2]		= &dmc_sel2.hw,
+		[NR_CLKS]			= NULL,
+	},
+	.num = NR_CLKS,
+};
+
+/* Convenience table to populate regmap in .probe */
+static struct clk_regmap *const a1_periphs_regmaps[] = {
+	&xtal_in,
+	&fixpll_in,
+	&usb_phy_in,
+	&usb_ctrl_in,
+	&hifipll_in,
+	&syspll_in,
+	&dds_in,
+	&sys,
+	&clktree,
+	&reset_ctrl,
+	&analog_ctrl,
+	&pwr_ctrl,
+	&pad_ctrl,
+	&sys_ctrl,
+	&temp_sensor,
+	&am2axi_dev,
+	&spicc_b,
+	&spicc_a,
+	&msr,
+	&audio,
+	&jtag_ctrl,
+	&saradc_en,
+	&pwm_ef,
+	&pwm_cd,
+	&pwm_ab,
+	&cec,
+	&i2c_s,
+	&ir_ctrl,
+	&i2c_m_d,
+	&i2c_m_c,
+	&i2c_m_b,
+	&i2c_m_a,
+	&acodec,
+	&otp,
+	&sd_emmc_a,
+	&usb_phy,
+	&usb_ctrl,
+	&sys_dspb,
+	&sys_dspa,
+	&dma,
+	&irq_ctrl,
+	&nic,
+	&gic,
+	&uart_c,
+	&uart_b,
+	&uart_a,
+	&sys_psram,
+	&rsa,
+	&coresight,
+	&am2axi_vad,
+	&audio_vad,
+	&axi_dmc,
+	&axi_psram,
+	&ramb,
+	&rama,
+	&axi_spifc,
+	&axi_nic,
+	&axi_dma,
+	&cpu_ctrl,
+	&rom,
+	&prod_i2c,
+	&dspa_sel,
+	&dspb_sel,
+	&dspa_en,
+	&dspa_en_nic,
+	&dspb_en,
+	&dspb_en_nic,
+	&rtc,
+	&ceca_32k_out,
+	&cecb_32k_out,
+	&clk_24m,
+	&clk_12m,
+	&fclk_div2_divn,
+	&gen,
+	&saradc_sel,
+	&saradc,
+	&pwm_a,
+	&pwm_b,
+	&pwm_c,
+	&pwm_d,
+	&pwm_e,
+	&pwm_f,
+	&spicc,
+	&ts,
+	&spifc,
+	&usb_bus,
+	&sd_emmc,
+	&psram,
+	&dmc,
+	&sys_a_sel,
+	&sys_a_div,
+	&sys_a,
+	&sys_b_sel,
+	&sys_b_div,
+	&sys_b,
+	&dspa_a_sel,
+	&dspa_a_div,
+	&dspa_a,
+	&dspa_b_sel,
+	&dspa_b_div,
+	&dspa_b,
+	&dspb_a_sel,
+	&dspb_a_div,
+	&dspb_a,
+	&dspb_b_sel,
+	&dspb_b_div,
+	&dspb_b,
+	&rtc_32k_in,
+	&rtc_32k_div,
+	&rtc_32k_xtal,
+	&rtc_32k_sel,
+	&cecb_32k_in,
+	&cecb_32k_div,
+	&cecb_32k_sel_pre,
+	&cecb_32k_sel,
+	&ceca_32k_in,
+	&ceca_32k_div,
+	&ceca_32k_sel_pre,
+	&ceca_32k_sel,
+	&fclk_div2_divn_pre,
+	&gen_sel,
+	&gen_div,
+	&saradc_div,
+	&pwm_a_sel,
+	&pwm_a_div,
+	&pwm_b_sel,
+	&pwm_b_div,
+	&pwm_c_sel,
+	&pwm_c_div,
+	&pwm_d_sel,
+	&pwm_d_div,
+	&pwm_e_sel,
+	&pwm_e_div,
+	&pwm_f_sel,
+	&pwm_f_div,
+	&spicc_sel,
+	&spicc_div,
+	&spicc_sel2,
+	&ts_div,
+	&spifc_sel,
+	&spifc_div,
+	&spifc_sel2,
+	&usb_bus_sel,
+	&usb_bus_div,
+	&sd_emmc_sel,
+	&sd_emmc_div,
+	&sd_emmc_sel2,
+	&psram_sel,
+	&psram_div,
+	&psram_sel2,
+	&dmc_sel,
+	&dmc_div,
+	&dmc_sel2,
+};
+
+static struct regmap_config a1_periphs_regmap_cfg = {
+	.reg_bits   = 32,
+	.val_bits   = 32,
+	.reg_stride = 4,
+};
+
+static int meson_a1_periphs_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	void __iomem *base;
+	struct regmap *map;
+	int clkid, i, err;
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return dev_err_probe(dev, PTR_ERR(base),
+				     "can't ioremap resource\n");
+
+	map = devm_regmap_init_mmio(dev, base, &a1_periphs_regmap_cfg);
+	if (IS_ERR(map))
+		return dev_err_probe(dev, PTR_ERR(map),
+				     "can't init regmap mmio region\n");
+
+	/* Populate regmap for the regmap backed clocks */
+	for (i = 0; i < ARRAY_SIZE(a1_periphs_regmaps); i++)
+		a1_periphs_regmaps[i]->map = map;
+
+	for (clkid = 0; clkid < a1_periphs_clks.num; clkid++) {
+		err = devm_clk_hw_register(dev, a1_periphs_clks.hws[clkid]);
+		if (err)
+			return dev_err_probe(dev, err,
+					     "clock[%d] registration failed\n",
+					     clkid);
+	}
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
+					   &a1_periphs_clks);
+}
+
+static const struct of_device_id a1_periphs_clkc_match_table[] = {
+	{ .compatible = "amlogic,a1-peripherals-clkc", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, a1_periphs_clkc_match_table);
+
+static struct platform_driver a1_periphs_clkc_driver = {
+	.probe = meson_a1_periphs_probe,
+	.driver = {
+		.name = "a1-peripherals-clkc",
+		.of_match_table = a1_periphs_clkc_match_table,
+	},
+};
+
+module_platform_driver(a1_periphs_clkc_driver);
+MODULE_AUTHOR("Jian Hu <jian.hu@amlogic.com>");
+MODULE_AUTHOR("Dmitry Rokosov <ddrokosov@sberdevices.ru>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/meson/a1-peripherals.h b/drivers/clk/meson/a1-peripherals.h
new file mode 100644
index 000000000000..526fc9ba5c9f
--- /dev/null
+++ b/drivers/clk/meson/a1-peripherals.h
@@ -0,0 +1,113 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Amlogic A1 Peripherals Clock Controller internals
+ *
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Jian Hu <jian.hu@amlogic.com>
+ *
+ * Copyright (c) 2023, SberDevices. All Rights Reserved.
+ * Author: Dmitry Rokosov <ddrokosov@sberdevices.ru>
+ */
+
+#ifndef __A1_PERIPHERALS_H
+#define __A1_PERIPHERALS_H
+
+/* peripherals clock controller register offset */
+#define SYS_OSCIN_CTRL		0x0
+#define RTC_BY_OSCIN_CTRL0	0x4
+#define RTC_BY_OSCIN_CTRL1	0x8
+#define RTC_CTRL		0xc
+#define SYS_CLK_CTRL0		0x10
+#define SYS_CLK_EN0		0x1c
+#define SYS_CLK_EN1		0x20
+#define AXI_CLK_EN		0x24
+#define DSPA_CLK_EN		0x28
+#define DSPB_CLK_EN		0x2c
+#define DSPA_CLK_CTRL0		0x30
+#define DSPB_CLK_CTRL0		0x34
+#define CLK12_24_CTRL		0x38
+#define GEN_CLK_CTRL		0x3c
+#define SAR_ADC_CLK_CTRL	0xc0
+#define PWM_CLK_AB_CTRL		0xc4
+#define PWM_CLK_CD_CTRL		0xc8
+#define PWM_CLK_EF_CTRL		0xcc
+#define SPICC_CLK_CTRL		0xd0
+#define TS_CLK_CTRL		0xd4
+#define SPIFC_CLK_CTRL		0xd8
+#define USB_BUSCLK_CTRL		0xdc
+#define SD_EMMC_CLK_CTRL	0xe0
+#define CECA_CLK_CTRL0		0xe4
+#define CECA_CLK_CTRL1		0xe8
+#define CECB_CLK_CTRL0		0xec
+#define CECB_CLK_CTRL1		0xf0
+#define PSRAM_CLK_CTRL		0xf4
+#define DMC_CLK_CTRL		0xf8
+
+/* include the CLKIDs that have been made part of the DT binding */
+#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
+
+/*
+ * CLKID index values for internal clocks
+ *
+ * These indices are entirely contrived and do not map onto the hardware.
+ * It has now been decided to expose everything by default in the DT header:
+ * include/dt-bindings/clock/a1-peripherals-clkc.h.
+ * Only the clocks ids we don't want to expose, such as the internal muxes and
+ * dividers of composite clocks, will remain defined here.
+ */
+#define CLKID_XTAL_IN		0
+#define CLKID_DSPA_SEL		61
+#define CLKID_DSPB_SEL		62
+#define CLKID_SARADC_SEL	74
+#define CLKID_SYS_A_SEL		89
+#define CLKID_SYS_A_DIV		90
+#define CLKID_SYS_A		91
+#define CLKID_SYS_B_SEL		92
+#define CLKID_SYS_B_DIV		93
+#define CLKID_SYS_B		94
+#define CLKID_DSPA_A_DIV	96
+#define CLKID_DSPA_A		97
+#define CLKID_DSPA_B_DIV	99
+#define CLKID_DSPA_B		100
+#define CLKID_DSPB_A_DIV	102
+#define CLKID_DSPB_A		103
+#define CLKID_DSPB_B_DIV	105
+#define CLKID_DSPB_B		106
+#define CLKID_RTC_32K_IN	107
+#define CLKID_RTC_32K_DIV	108
+#define CLKID_RTC_32K_XTAL	109
+#define CLKID_RTC_32K_SEL	110
+#define CLKID_CECB_32K_IN	111
+#define CLKID_CECB_32K_DIV	112
+#define CLKID_CECA_32K_IN	115
+#define CLKID_CECA_32K_DIV	116
+#define CLKID_DIV2_PRE		119
+#define CLKID_24M_DIV2		120
+#define CLKID_GEN_DIV		122
+#define CLKID_SARADC_DIV	123
+#define CLKID_PWM_A_DIV		125
+#define CLKID_PWM_B_DIV		127
+#define CLKID_PWM_C_DIV		129
+#define CLKID_PWM_D_DIV		131
+#define CLKID_PWM_E_DIV		133
+#define CLKID_PWM_F_DIV		135
+#define CLKID_SPICC_SEL		136
+#define CLKID_SPICC_DIV		137
+#define CLKID_SPICC_SEL2	138
+#define CLKID_TS_DIV		139
+#define CLKID_SPIFC_SEL		140
+#define CLKID_SPIFC_DIV		141
+#define CLKID_SPIFC_SEL2	142
+#define CLKID_USB_BUS_SEL	143
+#define CLKID_USB_BUS_DIV	144
+#define CLKID_SD_EMMC_SEL	145
+#define CLKID_SD_EMMC_DIV	146
+#define CLKID_PSRAM_SEL		148
+#define CLKID_PSRAM_DIV		149
+#define CLKID_PSRAM_SEL2	150
+#define CLKID_DMC_SEL		151
+#define CLKID_DMC_DIV		152
+#define CLKID_DMC_SEL2		153
+#define NR_CLKS			154
+
+#endif /* __A1_PERIPHERALS_H */