[v5,1/4] docs: perf: Add description for Synopsys DesignWare PCIe PMU driver
Commit Message
Alibaba's T-Head Yitan 710 SoC includes Synopsys' DesignWare Core PCIe
controller which implements which implements PMU for performance and
functional debugging to facilitate system maintenance.
Document it to provide guidance on how to use it.
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
---
.../admin-guide/perf/dwc_pcie_pmu.rst | 97 +++++++++++++++++++
Documentation/admin-guide/perf/index.rst | 1 +
2 files changed, 98 insertions(+)
create mode 100644 Documentation/admin-guide/perf/dwc_pcie_pmu.rst
Comments
On 5/22/2023 11:54 AM, Shuai Xue wrote:
> Alibaba's T-Head Yitan 710 SoC includes Synopsys' DesignWare Core PCIe
> controller which implements which implements PMU for performance and
> functional debugging to facilitate system maintenance.
>
> Document it to provide guidance on how to use it.
>
> Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
LGTM. Feel free to add:
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
On 2023/5/29 11:45, Baolin Wang wrote:
>
>
> On 5/22/2023 11:54 AM, Shuai Xue wrote:
>> Alibaba's T-Head Yitan 710 SoC includes Synopsys' DesignWare Core PCIe
>> controller which implements which implements PMU for performance and
>> functional debugging to facilitate system maintenance.
>>
>> Document it to provide guidance on how to use it.
>>
>> Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
>
> LGTM. Feel free to add:
> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Thank you :)
Best Regards,
Shuai
new file mode 100644
@@ -0,0 +1,97 @@
+======================================================================
+Synopsys DesignWare Cores (DWC) PCIe Performance Monitoring Unit (PMU)
+======================================================================
+
+DesignWare Cores (DWC) PCIe PMU
+===============================
+
+The PMU is not a PCIe Root Complex integrated End Point (RCiEP) device but
+only PCIe configuration space register block provided by each PCIe Root
+Port in a Vendor-Specific Extended Capability named RAS DES (Debug, Error
+injection, and Statistics).
+
+As the name indicated, the RAS DES capability supports system level
+debugging, AER error injection, and collection of statistics. To facilitate
+collection of statistics, Synopsys DesignWare Cores PCIe controller
+provides the following two features:
+
+- Time Based Analysis (RX/TX data throughput and time spent in each
+ low-power LTSSM state)
+- Lane Event counters (Error and Non-Error for lanes)
+
+Time Based Analysis
+-------------------
+
+Using this feature you can obtain information regarding RX/TX data
+throughput and time spent in each low-power LTSSM state by the controller.
+
+The counters are 64-bit width and measure data in two categories,
+
+- percentage of time does the controller stay in LTSSM state in a
+ configurable duration. The measurement range of each Event in Group#0.
+- amount of data processed (Units of 16 bytes). The measurement range of
+ each Event in Group#1.
+
+Lane Event counters
+-------------------
+
+Using this feature you can obtain Error and Non-Error information in
+specific lane by the controller.
+
+The counters are 32-bit width and the measured event is select by:
+
+- Group i
+- Event j within the Group i
+- and Lane k
+
+Some of the event counters only exist for specific configurations.
+
+DesignWare Cores (DWC) PCIe PMU Driver
+=======================================
+
+This driver add PMU devices for each PCIe Root Port. And the PMU device is
+named based the BDF of Root Port. For example,
+
+ 30:03.0 PCI bridge: Device 1ded:8000 (rev 01)
+
+the PMU device name for this Root Port is dwc_rootport_3018.
+
+The DWC PCIe PMU driver registers a perf PMU driver, which provides
+description of available events and configuration options in sysfs, see
+/sys/bus/event_source/devices/dwc_rootport_{bdf}.
+
+The "format" directory describes format of the config, fields of the
+perf_event_attr structure. The "events" directory provides configuration
+templates for all documented events. For example,
+"Rx_PCIe_TLP_Data_Payload" is an equivalent of "eventid=0x22,type=0x1".
+
+The "perf list" command shall list the available events from sysfs, e.g.::
+
+ $# perf list | grep dwc_rootport
+ <...>
+ dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/ [Kernel PMU event]
+ <...>
+ dwc_rootport_3018/rx_memory_read,lane=?/ [Kernel PMU event]
+
+Time Based Analysis Event Usage
+-------------------------------
+
+Example usage of counting PCIe RX TLP data payload (Units of 16 bytes)::
+
+ $# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/
+
+The average RX/TX bandwidth can be calculated using the following formula:
+
+ PCIe RX Bandwidth = PCIE_RX_DATA * 16B / Measure_Time_Window
+ PCIe TX Bandwidth = PCIE_TX_DATA * 16B / Measure_Time_Window
+
+Lane Event Usage
+-------------------------------
+
+Each lane has the same event set and to avoid generating a list of hundreds
+of events, the user need to specify the lane ID explicitly, e.g.::
+
+ $# perf stat -a -e dwc_rootport_3018/rx_memory_read,lane=4/
+
+The driver does not support sampling, therefore "perf record" will not
+work. Per-task (without "-a") perf sessions are not supported.
@@ -19,5 +19,6 @@ Performance monitor support
arm_dsu_pmu
thunderx2-pmu
alibaba_pmu
+ dwc_pcie_pmu
nvidia-pmu
meson-ddr-pmu