RISC-V: Add RVV mask logic auto-vectorization
Checks
Commit Message
From: Juzhe-Zhong <juzhe.zhong@rivai.ai>
This patch is adding mask logic auto-vectorization.
define the pattern as "define_insn_and_split" to allow
combine PASS easily combine series instructions.
For example:
combine vmxor.mm + vmnot.m into vmxnor.mm
Build success and regression PASS
Ok for trunk ?
gcc/ChangeLog:
* config/riscv/autovec.md (<optab><mode>3): New pattern.
(one_cmpl<mode>2): Ditto.
(*<optab>not<mode>): Ditto.
(*n<optab><mode>): Ditto.
* config/riscv/riscv-v.cc (expand_vec_cmp_float): Change to one_cmpl.
gcc/testsuite/ChangeLog:
* gcc.target/riscv/rvv/autovec/cmp/vcond-4.c: New test.
* gcc.target/riscv/rvv/autovec/cmp/vcond_run-4.c: New test.
---
gcc/config/riscv/autovec.md | 95 +++++++++++++++++++
gcc/config/riscv/riscv-v.cc | 7 +-
.../riscv/rvv/autovec/cmp/vcond-4.c | 53 +++++++++++
.../riscv/rvv/autovec/cmp/vcond_run-4.c | 35 +++++++
4 files changed, 187 insertions(+), 3 deletions(-)
create mode 100644 gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond-4.c
create mode 100644 gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond_run-4.c
Comments
Just one comment: define_insn_and_split should be used in this
scenario rather than define_insn_and_rewrite since you are not really
rewriting.
You can commit after updating to define_insn_and_split :)
On Wed, May 24, 2023 at 3:04 PM <juzhe.zhong@rivai.ai> wrote:
>
> From: Juzhe-Zhong <juzhe.zhong@rivai.ai>
>
> This patch is adding mask logic auto-vectorization.
> define the pattern as "define_insn_and_split" to allow
> combine PASS easily combine series instructions.
>
> For example:
> combine vmxor.mm + vmnot.m into vmxnor.mm
>
> Build success and regression PASS
>
> Ok for trunk ?
>
> gcc/ChangeLog:
>
> * config/riscv/autovec.md (<optab><mode>3): New pattern.
> (one_cmpl<mode>2): Ditto.
> (*<optab>not<mode>): Ditto.
> (*n<optab><mode>): Ditto.
> * config/riscv/riscv-v.cc (expand_vec_cmp_float): Change to one_cmpl.
>
> gcc/testsuite/ChangeLog:
>
> * gcc.target/riscv/rvv/autovec/cmp/vcond-4.c: New test.
> * gcc.target/riscv/rvv/autovec/cmp/vcond_run-4.c: New test.
>
> ---
> gcc/config/riscv/autovec.md | 95 +++++++++++++++++++
> gcc/config/riscv/riscv-v.cc | 7 +-
> .../riscv/rvv/autovec/cmp/vcond-4.c | 53 +++++++++++
> .../riscv/rvv/autovec/cmp/vcond_run-4.c | 35 +++++++
> 4 files changed, 187 insertions(+), 3 deletions(-)
> create mode 100644 gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond-4.c
> create mode 100644 gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond_run-4.c
>
> diff --git a/gcc/config/riscv/autovec.md b/gcc/config/riscv/autovec.md
> index 4eeeab624a4..cacf27e4e60 100644
> --- a/gcc/config/riscv/autovec.md
> +++ b/gcc/config/riscv/autovec.md
> @@ -163,6 +163,101 @@
> DONE;
> })
>
> +;; -------------------------------------------------------------------------
> +;; ---- [BOOL] Binary logical operations
> +;; -------------------------------------------------------------------------
> +;; Includes:
> +;; - vmand.mm
> +;; - vmxor.mm
> +;; - vmor.mm
> +;; -------------------------------------------------------------------------
> +
> +(define_insn_and_rewrite "<optab><mode>3"
> + [(set (match_operand:VB 0 "register_operand" "=vr")
> + (any_bitwise:VB (match_operand:VB 1 "register_operand" " vr")
> + (match_operand:VB 2 "register_operand" " vr")))]
> + "TARGET_VECTOR"
> + "#"
> + "&& can_create_pseudo_p ()"
> + {
> + insn_code icode = code_for_pred (<CODE>, <MODE>mode);
> + riscv_vector::emit_vlmax_insn (icode, riscv_vector::RVV_BINOP, operands);
> + DONE;
> + }
> + [(set_attr "type" "vmalu")
> + (set_attr "mode" "<MODE>")])
> +
> +;; -------------------------------------------------------------------------
> +;; ---- [BOOL] Inverse
> +;; -------------------------------------------------------------------------
> +;; Includes:
> +;; - vmnot.m
> +;; -------------------------------------------------------------------------
> +
> +(define_insn_and_rewrite "one_cmpl<mode>2"
> + [(set (match_operand:VB 0 "register_operand" "=vr")
> + (not:VB (match_operand:VB 1 "register_operand" " vr")))]
> + "TARGET_VECTOR"
> + "#"
> + "&& can_create_pseudo_p ()"
> + {
> + insn_code icode = code_for_pred_not (<MODE>mode);
> + riscv_vector::emit_vlmax_insn (icode, riscv_vector::RVV_UNOP, operands);
> + DONE;
> + }
> + [(set_attr "type" "vmalu")
> + (set_attr "mode" "<MODE>")])
> +
> +;; -------------------------------------------------------------------------
> +;; ---- [BOOL] Binary logical operations (inverted second input)
> +;; -------------------------------------------------------------------------
> +;; Includes:
> +;; - vmandnot.mm
> +;; - vmornot.mm
> +;; -------------------------------------------------------------------------
> +
> +(define_insn_and_rewrite "*<optab>not<mode>"
> + [(set (match_operand:VB 0 "register_operand" "=vr")
> + (bitmanip_bitwise:VB
> + (not:VB (match_operand:VB 2 "register_operand" " vr"))
> + (match_operand:VB 1 "register_operand" " vr")))]
> + "TARGET_VECTOR"
> + "#"
> + "&& can_create_pseudo_p ()"
> + {
> + insn_code icode = code_for_pred_not (<CODE>, <MODE>mode);
> + riscv_vector::emit_vlmax_insn (icode, riscv_vector::RVV_BINOP, operands);
> + DONE;
> + }
> + [(set_attr "type" "vmalu")
> + (set_attr "mode" "<MODE>")])
> +
> +;; -------------------------------------------------------------------------
> +;; ---- [BOOL] Binary logical operations (inverted result)
> +;; -------------------------------------------------------------------------
> +;; Includes:
> +;; - vmnand.mm
> +;; - vmnor.mm
> +;; - vmxnor.mm
> +;; -------------------------------------------------------------------------
> +
> +(define_insn_and_rewrite "*n<optab><mode>"
> + [(set (match_operand:VB 0 "register_operand" "=vr")
> + (not:VB
> + (any_bitwise:VB
> + (match_operand:VB 1 "register_operand" " vr")
> + (match_operand:VB 2 "register_operand" " vr"))))]
> + "TARGET_VECTOR"
> + "#"
> + "&& can_create_pseudo_p ()"
> + {
> + insn_code icode = code_for_pred_n (<CODE>, <MODE>mode);
> + riscv_vector::emit_vlmax_insn (icode, riscv_vector::RVV_BINOP, operands);
> + DONE;
> + }
> + [(set_attr "type" "vmalu")
> + (set_attr "mode" "<MODE>")])
> +
> ;; =========================================================================
> ;; == Comparisons and selects
> ;; =========================================================================
> diff --git a/gcc/config/riscv/riscv-v.cc b/gcc/config/riscv/riscv-v.cc
> index 10de5a19937..f71ad9e46a1 100644
> --- a/gcc/config/riscv/riscv-v.cc
> +++ b/gcc/config/riscv/riscv-v.cc
> @@ -1550,9 +1550,10 @@ expand_vec_cmp_float (rtx target, rtx_code code, rtx op0, rtx op1,
> emit_move_insn (target, eq0);
> return true;
> }
> - insn_code icode = code_for_pred_not (mask_mode);
> - rtx ops[] = {target, eq0};
> - emit_vlmax_insn (icode, RVV_UNOP, ops);
> +
> + /* We use one_cmpl<mode>2 to make Combine PASS to combine mask instructions
> + into: vmand.mm/vmnor.mm/vmnand.mm/vmnor.mm/vmxnor.mm. */
> + emit_insn (gen_rtx_SET (target, gen_rtx_NOT (mask_mode, eq0)));
> return false;
> }
>
> diff --git a/gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond-4.c b/gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond-4.c
> new file mode 100644
> index 00000000000..435a59c97f2
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond-4.c
> @@ -0,0 +1,53 @@
> +/* { dg-do compile } */
> +/* { dg-additional-options "-march=rv32gcv -mabi=ilp32d --param=riscv-autovec-preference=scalable" } */
> +
> +#include <stdint-gcc.h>
> +
> +#define b_and(A, B) ((A) & (B))
> +#define b_orr(A, B) ((A) | (B))
> +#define b_xor(A, B) ((A) ^ (B))
> +#define b_nand(A, B) (!((A) & (B)))
> +#define b_nor(A, B) (!((A) | (B)))
> +#define b_xnor(A, B) (!(A) ^ (B))
> +#define b_andnot(A, B) ((A) & !(B))
> +#define b_ornot(A, B) ((A) | !(B))
> +
> +#define LOOP(TYPE, BINOP) \
> + void __attribute__ ((noinline, noclone)) \
> + test_##TYPE##_##BINOP (TYPE *restrict dest, TYPE *restrict src, \
> + TYPE *restrict a, TYPE *restrict b, TYPE *restrict c, \
> + TYPE *restrict d, TYPE fallback, int count) \
> + { \
> + for (int i = 0; i < count; ++i) \
> + { \
> + TYPE srcv = src[i]; \
> + dest[i] = (BINOP (__builtin_isunordered (a[i], b[i]), \
> + __builtin_isunordered (c[i], d[i])) \
> + ? srcv \
> + : fallback); \
> + } \
> + }
> +
> +#define TEST_BINOP(T, BINOP) \
> + T (float, BINOP) \
> + T (double, BINOP)
> +
> +#define TEST_ALL(T) \
> + TEST_BINOP (T, b_and) \
> + TEST_BINOP (T, b_orr) \
> + TEST_BINOP (T, b_xor) \
> + TEST_BINOP (T, b_nand) \
> + TEST_BINOP (T, b_nor) \
> + TEST_BINOP (T, b_xnor) \
> + TEST_BINOP (T, b_andnot) \
> + TEST_BINOP (T, b_ornot)
> +
> +TEST_ALL (LOOP)
> +
> +/* { dg-final { scan-assembler-times {\tvmand\.mm} 2 } } */
> +/* { dg-final { scan-assembler-times {\tvmor\.mm} 2 } } */
> +/* { dg-final { scan-assembler-times {\tvmxor\.mm} 2 } } */
> +/* { dg-final { scan-assembler-times {\tvmnot\.m} 4 } } */
> +/* { dg-final { scan-assembler-times {\tvmxnor\.mm} 2 } } */
> +/* { dg-final { scan-assembler-times {\tvmandn\.mm} 4 } } */
> +/* { dg-final { scan-assembler-times {\tvmorn\.mm} 4 } } */
> diff --git a/gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond_run-4.c b/gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond_run-4.c
> new file mode 100644
> index 00000000000..6c45c274c33
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond_run-4.c
> @@ -0,0 +1,35 @@
> +/* { dg-do run { target { riscv_vector } } } */
> +/* { dg-additional-options "--param=riscv-autovec-preference=scalable" } */
> +
> +#include "vcond-4.c"
> +
> +#define N 401
> +
> +#define RUN_LOOP(TYPE, BINOP) \
> + { \
> + TYPE dest[N], src[N], a[N], b[N], c[N], d[N]; \
> + for (int i = 0; i < N; ++i) \
> + { \
> + src[i] = i * i; \
> + a[i] = i % 5 < 3 ? __builtin_nan("") : i; \
> + b[i] = i % 7 < 4 ? __builtin_nan("") : i; \
> + c[i] = i % 9 < 5 ? __builtin_nan("") : i; \
> + d[i] = i % 11 < 6 ? __builtin_nan("") : i; \
> + asm volatile ("" ::: "memory"); \
> + } \
> + test_##TYPE##_##BINOP (dest, src, a, b, c, d, 100, N); \
> + for (int i = 0; i < N; ++i) \
> + { \
> + int res = BINOP (__builtin_isunordered (a[i], b[i]), \
> + __builtin_isunordered (c[i], d[i])); \
> + if (dest[i] != (res ? src[i] : 100.0)) \
> + __builtin_abort (); \
> + } \
> + }
> +
> +int __attribute__ ((optimize (1)))
> +main (void)
> +{
> + TEST_ALL (RUN_LOOP)
> + return 0;
> +}
> --
> 2.36.3
>
Thanks kito.,
change it into define_insn_and_split send V2 soon.
juzhe.zhong@rivai.ai
From: Kito Cheng
Date: 2023-05-24 15:18
To: juzhe.zhong
CC: gcc-patches; kito.cheng; palmer; palmer; jeffreyalaw; rdapp.gcc
Subject: Re: [PATCH] RISC-V: Add RVV mask logic auto-vectorization
Just one comment: define_insn_and_split should be used in this
scenario rather than define_insn_and_rewrite since you are not really
rewriting.
You can commit after updating to define_insn_and_split :)
On Wed, May 24, 2023 at 3:04 PM <juzhe.zhong@rivai.ai> wrote:
>
> From: Juzhe-Zhong <juzhe.zhong@rivai.ai>
>
> This patch is adding mask logic auto-vectorization.
> define the pattern as "define_insn_and_split" to allow
> combine PASS easily combine series instructions.
>
> For example:
> combine vmxor.mm + vmnot.m into vmxnor.mm
>
> Build success and regression PASS
>
> Ok for trunk ?
>
> gcc/ChangeLog:
>
> * config/riscv/autovec.md (<optab><mode>3): New pattern.
> (one_cmpl<mode>2): Ditto.
> (*<optab>not<mode>): Ditto.
> (*n<optab><mode>): Ditto.
> * config/riscv/riscv-v.cc (expand_vec_cmp_float): Change to one_cmpl.
>
> gcc/testsuite/ChangeLog:
>
> * gcc.target/riscv/rvv/autovec/cmp/vcond-4.c: New test.
> * gcc.target/riscv/rvv/autovec/cmp/vcond_run-4.c: New test.
>
> ---
> gcc/config/riscv/autovec.md | 95 +++++++++++++++++++
> gcc/config/riscv/riscv-v.cc | 7 +-
> .../riscv/rvv/autovec/cmp/vcond-4.c | 53 +++++++++++
> .../riscv/rvv/autovec/cmp/vcond_run-4.c | 35 +++++++
> 4 files changed, 187 insertions(+), 3 deletions(-)
> create mode 100644 gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond-4.c
> create mode 100644 gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond_run-4.c
>
> diff --git a/gcc/config/riscv/autovec.md b/gcc/config/riscv/autovec.md
> index 4eeeab624a4..cacf27e4e60 100644
> --- a/gcc/config/riscv/autovec.md
> +++ b/gcc/config/riscv/autovec.md
> @@ -163,6 +163,101 @@
> DONE;
> })
>
> +;; -------------------------------------------------------------------------
> +;; ---- [BOOL] Binary logical operations
> +;; -------------------------------------------------------------------------
> +;; Includes:
> +;; - vmand.mm
> +;; - vmxor.mm
> +;; - vmor.mm
> +;; -------------------------------------------------------------------------
> +
> +(define_insn_and_rewrite "<optab><mode>3"
> + [(set (match_operand:VB 0 "register_operand" "=vr")
> + (any_bitwise:VB (match_operand:VB 1 "register_operand" " vr")
> + (match_operand:VB 2 "register_operand" " vr")))]
> + "TARGET_VECTOR"
> + "#"
> + "&& can_create_pseudo_p ()"
> + {
> + insn_code icode = code_for_pred (<CODE>, <MODE>mode);
> + riscv_vector::emit_vlmax_insn (icode, riscv_vector::RVV_BINOP, operands);
> + DONE;
> + }
> + [(set_attr "type" "vmalu")
> + (set_attr "mode" "<MODE>")])
> +
> +;; -------------------------------------------------------------------------
> +;; ---- [BOOL] Inverse
> +;; -------------------------------------------------------------------------
> +;; Includes:
> +;; - vmnot.m
> +;; -------------------------------------------------------------------------
> +
> +(define_insn_and_rewrite "one_cmpl<mode>2"
> + [(set (match_operand:VB 0 "register_operand" "=vr")
> + (not:VB (match_operand:VB 1 "register_operand" " vr")))]
> + "TARGET_VECTOR"
> + "#"
> + "&& can_create_pseudo_p ()"
> + {
> + insn_code icode = code_for_pred_not (<MODE>mode);
> + riscv_vector::emit_vlmax_insn (icode, riscv_vector::RVV_UNOP, operands);
> + DONE;
> + }
> + [(set_attr "type" "vmalu")
> + (set_attr "mode" "<MODE>")])
> +
> +;; -------------------------------------------------------------------------
> +;; ---- [BOOL] Binary logical operations (inverted second input)
> +;; -------------------------------------------------------------------------
> +;; Includes:
> +;; - vmandnot.mm
> +;; - vmornot.mm
> +;; -------------------------------------------------------------------------
> +
> +(define_insn_and_rewrite "*<optab>not<mode>"
> + [(set (match_operand:VB 0 "register_operand" "=vr")
> + (bitmanip_bitwise:VB
> + (not:VB (match_operand:VB 2 "register_operand" " vr"))
> + (match_operand:VB 1 "register_operand" " vr")))]
> + "TARGET_VECTOR"
> + "#"
> + "&& can_create_pseudo_p ()"
> + {
> + insn_code icode = code_for_pred_not (<CODE>, <MODE>mode);
> + riscv_vector::emit_vlmax_insn (icode, riscv_vector::RVV_BINOP, operands);
> + DONE;
> + }
> + [(set_attr "type" "vmalu")
> + (set_attr "mode" "<MODE>")])
> +
> +;; -------------------------------------------------------------------------
> +;; ---- [BOOL] Binary logical operations (inverted result)
> +;; -------------------------------------------------------------------------
> +;; Includes:
> +;; - vmnand.mm
> +;; - vmnor.mm
> +;; - vmxnor.mm
> +;; -------------------------------------------------------------------------
> +
> +(define_insn_and_rewrite "*n<optab><mode>"
> + [(set (match_operand:VB 0 "register_operand" "=vr")
> + (not:VB
> + (any_bitwise:VB
> + (match_operand:VB 1 "register_operand" " vr")
> + (match_operand:VB 2 "register_operand" " vr"))))]
> + "TARGET_VECTOR"
> + "#"
> + "&& can_create_pseudo_p ()"
> + {
> + insn_code icode = code_for_pred_n (<CODE>, <MODE>mode);
> + riscv_vector::emit_vlmax_insn (icode, riscv_vector::RVV_BINOP, operands);
> + DONE;
> + }
> + [(set_attr "type" "vmalu")
> + (set_attr "mode" "<MODE>")])
> +
> ;; =========================================================================
> ;; == Comparisons and selects
> ;; =========================================================================
> diff --git a/gcc/config/riscv/riscv-v.cc b/gcc/config/riscv/riscv-v.cc
> index 10de5a19937..f71ad9e46a1 100644
> --- a/gcc/config/riscv/riscv-v.cc
> +++ b/gcc/config/riscv/riscv-v.cc
> @@ -1550,9 +1550,10 @@ expand_vec_cmp_float (rtx target, rtx_code code, rtx op0, rtx op1,
> emit_move_insn (target, eq0);
> return true;
> }
> - insn_code icode = code_for_pred_not (mask_mode);
> - rtx ops[] = {target, eq0};
> - emit_vlmax_insn (icode, RVV_UNOP, ops);
> +
> + /* We use one_cmpl<mode>2 to make Combine PASS to combine mask instructions
> + into: vmand.mm/vmnor.mm/vmnand.mm/vmnor.mm/vmxnor.mm. */
> + emit_insn (gen_rtx_SET (target, gen_rtx_NOT (mask_mode, eq0)));
> return false;
> }
>
> diff --git a/gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond-4.c b/gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond-4.c
> new file mode 100644
> index 00000000000..435a59c97f2
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond-4.c
> @@ -0,0 +1,53 @@
> +/* { dg-do compile } */
> +/* { dg-additional-options "-march=rv32gcv -mabi=ilp32d --param=riscv-autovec-preference=scalable" } */
> +
> +#include <stdint-gcc.h>
> +
> +#define b_and(A, B) ((A) & (B))
> +#define b_orr(A, B) ((A) | (B))
> +#define b_xor(A, B) ((A) ^ (B))
> +#define b_nand(A, B) (!((A) & (B)))
> +#define b_nor(A, B) (!((A) | (B)))
> +#define b_xnor(A, B) (!(A) ^ (B))
> +#define b_andnot(A, B) ((A) & !(B))
> +#define b_ornot(A, B) ((A) | !(B))
> +
> +#define LOOP(TYPE, BINOP) \
> + void __attribute__ ((noinline, noclone)) \
> + test_##TYPE##_##BINOP (TYPE *restrict dest, TYPE *restrict src, \
> + TYPE *restrict a, TYPE *restrict b, TYPE *restrict c, \
> + TYPE *restrict d, TYPE fallback, int count) \
> + { \
> + for (int i = 0; i < count; ++i) \
> + { \
> + TYPE srcv = src[i]; \
> + dest[i] = (BINOP (__builtin_isunordered (a[i], b[i]), \
> + __builtin_isunordered (c[i], d[i])) \
> + ? srcv \
> + : fallback); \
> + } \
> + }
> +
> +#define TEST_BINOP(T, BINOP) \
> + T (float, BINOP) \
> + T (double, BINOP)
> +
> +#define TEST_ALL(T) \
> + TEST_BINOP (T, b_and) \
> + TEST_BINOP (T, b_orr) \
> + TEST_BINOP (T, b_xor) \
> + TEST_BINOP (T, b_nand) \
> + TEST_BINOP (T, b_nor) \
> + TEST_BINOP (T, b_xnor) \
> + TEST_BINOP (T, b_andnot) \
> + TEST_BINOP (T, b_ornot)
> +
> +TEST_ALL (LOOP)
> +
> +/* { dg-final { scan-assembler-times {\tvmand\.mm} 2 } } */
> +/* { dg-final { scan-assembler-times {\tvmor\.mm} 2 } } */
> +/* { dg-final { scan-assembler-times {\tvmxor\.mm} 2 } } */
> +/* { dg-final { scan-assembler-times {\tvmnot\.m} 4 } } */
> +/* { dg-final { scan-assembler-times {\tvmxnor\.mm} 2 } } */
> +/* { dg-final { scan-assembler-times {\tvmandn\.mm} 4 } } */
> +/* { dg-final { scan-assembler-times {\tvmorn\.mm} 4 } } */
> diff --git a/gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond_run-4.c b/gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond_run-4.c
> new file mode 100644
> index 00000000000..6c45c274c33
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/riscv/rvv/autovec/cmp/vcond_run-4.c
> @@ -0,0 +1,35 @@
> +/* { dg-do run { target { riscv_vector } } } */
> +/* { dg-additional-options "--param=riscv-autovec-preference=scalable" } */
> +
> +#include "vcond-4.c"
> +
> +#define N 401
> +
> +#define RUN_LOOP(TYPE, BINOP) \
> + { \
> + TYPE dest[N], src[N], a[N], b[N], c[N], d[N]; \
> + for (int i = 0; i < N; ++i) \
> + { \
> + src[i] = i * i; \
> + a[i] = i % 5 < 3 ? __builtin_nan("") : i; \
> + b[i] = i % 7 < 4 ? __builtin_nan("") : i; \
> + c[i] = i % 9 < 5 ? __builtin_nan("") : i; \
> + d[i] = i % 11 < 6 ? __builtin_nan("") : i; \
> + asm volatile ("" ::: "memory"); \
> + } \
> + test_##TYPE##_##BINOP (dest, src, a, b, c, d, 100, N); \
> + for (int i = 0; i < N; ++i) \
> + { \
> + int res = BINOP (__builtin_isunordered (a[i], b[i]), \
> + __builtin_isunordered (c[i], d[i])); \
> + if (dest[i] != (res ? src[i] : 100.0)) \
> + __builtin_abort (); \
> + } \
> + }
> +
> +int __attribute__ ((optimize (1)))
> +main (void)
> +{
> + TEST_ALL (RUN_LOOP)
> + return 0;
> +}
> --
> 2.36.3
>
@@ -163,6 +163,101 @@
DONE;
})
+;; -------------------------------------------------------------------------
+;; ---- [BOOL] Binary logical operations
+;; -------------------------------------------------------------------------
+;; Includes:
+;; - vmand.mm
+;; - vmxor.mm
+;; - vmor.mm
+;; -------------------------------------------------------------------------
+
+(define_insn_and_rewrite "<optab><mode>3"
+ [(set (match_operand:VB 0 "register_operand" "=vr")
+ (any_bitwise:VB (match_operand:VB 1 "register_operand" " vr")
+ (match_operand:VB 2 "register_operand" " vr")))]
+ "TARGET_VECTOR"
+ "#"
+ "&& can_create_pseudo_p ()"
+ {
+ insn_code icode = code_for_pred (<CODE>, <MODE>mode);
+ riscv_vector::emit_vlmax_insn (icode, riscv_vector::RVV_BINOP, operands);
+ DONE;
+ }
+ [(set_attr "type" "vmalu")
+ (set_attr "mode" "<MODE>")])
+
+;; -------------------------------------------------------------------------
+;; ---- [BOOL] Inverse
+;; -------------------------------------------------------------------------
+;; Includes:
+;; - vmnot.m
+;; -------------------------------------------------------------------------
+
+(define_insn_and_rewrite "one_cmpl<mode>2"
+ [(set (match_operand:VB 0 "register_operand" "=vr")
+ (not:VB (match_operand:VB 1 "register_operand" " vr")))]
+ "TARGET_VECTOR"
+ "#"
+ "&& can_create_pseudo_p ()"
+ {
+ insn_code icode = code_for_pred_not (<MODE>mode);
+ riscv_vector::emit_vlmax_insn (icode, riscv_vector::RVV_UNOP, operands);
+ DONE;
+ }
+ [(set_attr "type" "vmalu")
+ (set_attr "mode" "<MODE>")])
+
+;; -------------------------------------------------------------------------
+;; ---- [BOOL] Binary logical operations (inverted second input)
+;; -------------------------------------------------------------------------
+;; Includes:
+;; - vmandnot.mm
+;; - vmornot.mm
+;; -------------------------------------------------------------------------
+
+(define_insn_and_rewrite "*<optab>not<mode>"
+ [(set (match_operand:VB 0 "register_operand" "=vr")
+ (bitmanip_bitwise:VB
+ (not:VB (match_operand:VB 2 "register_operand" " vr"))
+ (match_operand:VB 1 "register_operand" " vr")))]
+ "TARGET_VECTOR"
+ "#"
+ "&& can_create_pseudo_p ()"
+ {
+ insn_code icode = code_for_pred_not (<CODE>, <MODE>mode);
+ riscv_vector::emit_vlmax_insn (icode, riscv_vector::RVV_BINOP, operands);
+ DONE;
+ }
+ [(set_attr "type" "vmalu")
+ (set_attr "mode" "<MODE>")])
+
+;; -------------------------------------------------------------------------
+;; ---- [BOOL] Binary logical operations (inverted result)
+;; -------------------------------------------------------------------------
+;; Includes:
+;; - vmnand.mm
+;; - vmnor.mm
+;; - vmxnor.mm
+;; -------------------------------------------------------------------------
+
+(define_insn_and_rewrite "*n<optab><mode>"
+ [(set (match_operand:VB 0 "register_operand" "=vr")
+ (not:VB
+ (any_bitwise:VB
+ (match_operand:VB 1 "register_operand" " vr")
+ (match_operand:VB 2 "register_operand" " vr"))))]
+ "TARGET_VECTOR"
+ "#"
+ "&& can_create_pseudo_p ()"
+ {
+ insn_code icode = code_for_pred_n (<CODE>, <MODE>mode);
+ riscv_vector::emit_vlmax_insn (icode, riscv_vector::RVV_BINOP, operands);
+ DONE;
+ }
+ [(set_attr "type" "vmalu")
+ (set_attr "mode" "<MODE>")])
+
;; =========================================================================
;; == Comparisons and selects
;; =========================================================================
@@ -1550,9 +1550,10 @@ expand_vec_cmp_float (rtx target, rtx_code code, rtx op0, rtx op1,
emit_move_insn (target, eq0);
return true;
}
- insn_code icode = code_for_pred_not (mask_mode);
- rtx ops[] = {target, eq0};
- emit_vlmax_insn (icode, RVV_UNOP, ops);
+
+ /* We use one_cmpl<mode>2 to make Combine PASS to combine mask instructions
+ into: vmand.mm/vmnor.mm/vmnand.mm/vmnor.mm/vmxnor.mm. */
+ emit_insn (gen_rtx_SET (target, gen_rtx_NOT (mask_mode, eq0)));
return false;
}
new file mode 100644
@@ -0,0 +1,53 @@
+/* { dg-do compile } */
+/* { dg-additional-options "-march=rv32gcv -mabi=ilp32d --param=riscv-autovec-preference=scalable" } */
+
+#include <stdint-gcc.h>
+
+#define b_and(A, B) ((A) & (B))
+#define b_orr(A, B) ((A) | (B))
+#define b_xor(A, B) ((A) ^ (B))
+#define b_nand(A, B) (!((A) & (B)))
+#define b_nor(A, B) (!((A) | (B)))
+#define b_xnor(A, B) (!(A) ^ (B))
+#define b_andnot(A, B) ((A) & !(B))
+#define b_ornot(A, B) ((A) | !(B))
+
+#define LOOP(TYPE, BINOP) \
+ void __attribute__ ((noinline, noclone)) \
+ test_##TYPE##_##BINOP (TYPE *restrict dest, TYPE *restrict src, \
+ TYPE *restrict a, TYPE *restrict b, TYPE *restrict c, \
+ TYPE *restrict d, TYPE fallback, int count) \
+ { \
+ for (int i = 0; i < count; ++i) \
+ { \
+ TYPE srcv = src[i]; \
+ dest[i] = (BINOP (__builtin_isunordered (a[i], b[i]), \
+ __builtin_isunordered (c[i], d[i])) \
+ ? srcv \
+ : fallback); \
+ } \
+ }
+
+#define TEST_BINOP(T, BINOP) \
+ T (float, BINOP) \
+ T (double, BINOP)
+
+#define TEST_ALL(T) \
+ TEST_BINOP (T, b_and) \
+ TEST_BINOP (T, b_orr) \
+ TEST_BINOP (T, b_xor) \
+ TEST_BINOP (T, b_nand) \
+ TEST_BINOP (T, b_nor) \
+ TEST_BINOP (T, b_xnor) \
+ TEST_BINOP (T, b_andnot) \
+ TEST_BINOP (T, b_ornot)
+
+TEST_ALL (LOOP)
+
+/* { dg-final { scan-assembler-times {\tvmand\.mm} 2 } } */
+/* { dg-final { scan-assembler-times {\tvmor\.mm} 2 } } */
+/* { dg-final { scan-assembler-times {\tvmxor\.mm} 2 } } */
+/* { dg-final { scan-assembler-times {\tvmnot\.m} 4 } } */
+/* { dg-final { scan-assembler-times {\tvmxnor\.mm} 2 } } */
+/* { dg-final { scan-assembler-times {\tvmandn\.mm} 4 } } */
+/* { dg-final { scan-assembler-times {\tvmorn\.mm} 4 } } */
new file mode 100644
@@ -0,0 +1,35 @@
+/* { dg-do run { target { riscv_vector } } } */
+/* { dg-additional-options "--param=riscv-autovec-preference=scalable" } */
+
+#include "vcond-4.c"
+
+#define N 401
+
+#define RUN_LOOP(TYPE, BINOP) \
+ { \
+ TYPE dest[N], src[N], a[N], b[N], c[N], d[N]; \
+ for (int i = 0; i < N; ++i) \
+ { \
+ src[i] = i * i; \
+ a[i] = i % 5 < 3 ? __builtin_nan("") : i; \
+ b[i] = i % 7 < 4 ? __builtin_nan("") : i; \
+ c[i] = i % 9 < 5 ? __builtin_nan("") : i; \
+ d[i] = i % 11 < 6 ? __builtin_nan("") : i; \
+ asm volatile ("" ::: "memory"); \
+ } \
+ test_##TYPE##_##BINOP (dest, src, a, b, c, d, 100, N); \
+ for (int i = 0; i < N; ++i) \
+ { \
+ int res = BINOP (__builtin_isunordered (a[i], b[i]), \
+ __builtin_isunordered (c[i], d[i])); \
+ if (dest[i] != (res ? src[i] : 100.0)) \
+ __builtin_abort (); \
+ } \
+ }
+
+int __attribute__ ((optimize (1)))
+main (void)
+{
+ TEST_ALL (RUN_LOOP)
+ return 0;
+}