[v2,12/12] arm64: dts: qcom: sc8280xp-x13s: Add thermal zone support

Message ID 20221029051449.30678-13-manivannan.sadhasivam@linaro.org
State New
Headers
Series sc8280xp-pmic updates and X13s thermal zone support |

Commit Message

Manivannan Sadhasivam Oct. 29, 2022, 5:14 a.m. UTC
  Add thermal zone support by making use of the thermistor SYS_THERM6.
Based on experiments, this thermistor seems to reflect the actual
surface temperature of the laptop.

For the cooling device, all BIG CPU cores are throttle down to keep the
temperature at a sane level.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 46 +++++++++++++++++++
 1 file changed, 46 insertions(+)
  

Comments

Konrad Dybcio Oct. 29, 2022, 2:29 p.m. UTC | #1
On 29.10.2022 07:14, Manivannan Sadhasivam wrote:
> Add thermal zone support by making use of the thermistor SYS_THERM6.
> Based on experiments, this thermistor seems to reflect the actual
> surface temperature of the laptop.
> 
> For the cooling device, all BIG CPU cores are throttle down to keep the
s/throttle/throttled

Is it okay to let the 4xA78C run at full throttle in thermal emergencies though?
> temperature at a sane level.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 46 +++++++++++++++++++
>  1 file changed, 46 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index ca77c19c6d0d..96e2fa72f782 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -29,6 +29,52 @@ backlight {
>  		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
>  	};
>  
> +	thermal-zones {
> +		skin-temp-thermal {
> +			polling-delay-passive = <250>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&pmk8280_adc_tm 5>;
> +
> +			trips {
> +				skin_temp_alert0: trip-point0 {
> +					temperature = <55000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				skin_temp_alert1: trip-point1 {
> +					temperature = <58000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +
> +				skin-temp-crit {
> +					temperature = <73000>;
Ouch, I didn't know we were serving burnt fingers at the cafeteria today :D

Or maybe this just looks scary.. The laptop looks plastic, so maybe it won't cause instant
burns?

Konrad
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&skin_temp_alert0>;
> +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +
> +				map1 {
> +					trip = <&skin_temp_alert1>;
> +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +		};
> +	};
> +
>  	vreg_edp_bl: regulator-edp-bl {
>  		compatible = "regulator-fixed";
>
  
Steev Klimaszewski Oct. 29, 2022, 7:07 p.m. UTC | #2
On Sat, Oct 29, 2022 at 9:29 AM Konrad Dybcio
<konrad.dybcio@somainline.org> wrote:
>
>
>
> On 29.10.2022 07:14, Manivannan Sadhasivam wrote:
> > Add thermal zone support by making use of the thermistor SYS_THERM6.
> > Based on experiments, this thermistor seems to reflect the actual
> > surface temperature of the laptop.
> >
> > For the cooling device, all BIG CPU cores are throttle down to keep the
> s/throttle/throttled
>
> Is it okay to let the 4xA78C run at full throttle in thermal emergencies though?
> > temperature at a sane level.
> >
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 46 +++++++++++++++++++
> >  1 file changed, 46 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > index ca77c19c6d0d..96e2fa72f782 100644
> > --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > @@ -29,6 +29,52 @@ backlight {
> >               pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
> >       };
> >
> > +     thermal-zones {
> > +             skin-temp-thermal {
> > +                     polling-delay-passive = <250>;
> > +                     polling-delay = <0>;
> > +                     thermal-sensors = <&pmk8280_adc_tm 5>;
> > +
> > +                     trips {
> > +                             skin_temp_alert0: trip-point0 {
> > +                                     temperature = <55000>;
> > +                                     hysteresis = <1000>;
> > +                                     type = "passive";
> > +                             };
> > +
> > +                             skin_temp_alert1: trip-point1 {
> > +                                     temperature = <58000>;
> > +                                     hysteresis = <1000>;
> > +                                     type = "passive";
> > +                             };
> > +
> > +                             skin-temp-crit {
> > +                                     temperature = <73000>;
> Ouch, I didn't know we were serving burnt fingers at the cafeteria today :D
>
> Or maybe this just looks scary.. The laptop looks plastic, so maybe it won't cause instant
> burns?
>

Disclaimer: I'm an end user that likes to cosplay as a kernel
developer sometimes...

IMO, it just looks scary.  the skin-temp, afaik, is the temperature of
the shell of the laptop, so once it reaches 73C, it would be crit.  In
practice (I've been testing this patch set for a while), I've never
been able to hit 73C, even with the ambient temperature in my
apartment being 77F and multiple compilations running.  I've also
tested a hack to increase the trips to a little bit higher (65/68/73)
and still not been able to do so.

On the flip side, without this patchset, we do not have any thermal
trips at all, and the machine will quite happily run up to 90C (and
I've not seen it shut down, but I wouldn't use it on my lap when this
is occurring...)

> Konrad
> > +                                     hysteresis = <1000>;
> > +                                     type = "critical";
> > +                             };
> > +                     };
> > +
> > +                     cooling-maps {
> > +                             map0 {
> > +                                     trip = <&skin_temp_alert0>;
> > +                                     cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +                                                      <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +                                                      <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +                                                      <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > +                             };
> > +
> > +                             map1 {
> > +                                     trip = <&skin_temp_alert1>;
> > +                                     cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +                                                      <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +                                                      <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +                                                      <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > +                             };
> > +                     };
> > +             };
> > +     };
> > +
> >       vreg_edp_bl: regulator-edp-bl {
> >               compatible = "regulator-fixed";
> >
  
Manivannan Sadhasivam Nov. 3, 2022, 5:50 a.m. UTC | #3
On Sat, Oct 29, 2022 at 04:29:05PM +0200, Konrad Dybcio wrote:
> 
> 
> On 29.10.2022 07:14, Manivannan Sadhasivam wrote:
> > Add thermal zone support by making use of the thermistor SYS_THERM6.
> > Based on experiments, this thermistor seems to reflect the actual
> > surface temperature of the laptop.
> > 
> > For the cooling device, all BIG CPU cores are throttle down to keep the
> s/throttle/throttled
> 
> Is it okay to let the 4xA78C run at full throttle in thermal emergencies though?

I don't get it. Can you elaborate?

> > temperature at a sane level.
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 46 +++++++++++++++++++
> >  1 file changed, 46 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > index ca77c19c6d0d..96e2fa72f782 100644
> > --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > @@ -29,6 +29,52 @@ backlight {
> >  		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
> >  	};
> >  
> > +	thermal-zones {
> > +		skin-temp-thermal {
> > +			polling-delay-passive = <250>;
> > +			polling-delay = <0>;
> > +			thermal-sensors = <&pmk8280_adc_tm 5>;
> > +
> > +			trips {
> > +				skin_temp_alert0: trip-point0 {
> > +					temperature = <55000>;
> > +					hysteresis = <1000>;
> > +					type = "passive";
> > +				};
> > +
> > +				skin_temp_alert1: trip-point1 {
> > +					temperature = <58000>;
> > +					hysteresis = <1000>;
> > +					type = "passive";
> > +				};
> > +
> > +				skin-temp-crit {
> > +					temperature = <73000>;
> Ouch, I didn't know we were serving burnt fingers at the cafeteria today :D
> 
> Or maybe this just looks scary.. The laptop looks plastic, so maybe it won't cause instant
> burns?
> 

73c is what the reasonable number I came up with after some experiments. At
this point the temperature won't burn your finger but crossing this surely
would (that's what happening without this series).

Thanks,
Mani

> Konrad
> > +					hysteresis = <1000>;
> > +					type = "critical";
> > +				};
> > +			};
> > +
> > +			cooling-maps {
> > +				map0 {
> > +					trip = <&skin_temp_alert0>;
> > +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > +				};
> > +
> > +				map1 {
> > +					trip = <&skin_temp_alert1>;
> > +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > +				};
> > +			};
> > +		};
> > +	};
> > +
> >  	vreg_edp_bl: regulator-edp-bl {
> >  		compatible = "regulator-fixed";
> >
  
Konrad Dybcio Nov. 3, 2022, 10:02 a.m. UTC | #4
On 03/11/2022 06:50, Manivannan Sadhasivam wrote:
> On Sat, Oct 29, 2022 at 04:29:05PM +0200, Konrad Dybcio wrote:
>>
>> On 29.10.2022 07:14, Manivannan Sadhasivam wrote:
>>> Add thermal zone support by making use of the thermistor SYS_THERM6.
>>> Based on experiments, this thermistor seems to reflect the actual
>>> surface temperature of the laptop.
>>>
>>> For the cooling device, all BIG CPU cores are throttle down to keep the
>> s/throttle/throttled
>>
>> Is it okay to let the 4xA78C run at full throttle in thermal emergencies though?
> I don't get it. Can you elaborate?

8280xp has 4xA78C and 4xX1C. You only added the latter ones to the 
cooling map.


>
>>> temperature at a sane level.
>>>
>>> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
>>> ---
>>>   .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 46 +++++++++++++++++++
>>>   1 file changed, 46 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
>>> index ca77c19c6d0d..96e2fa72f782 100644
>>> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
>>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
>>> @@ -29,6 +29,52 @@ backlight {
>>>   		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
>>>   	};
>>>   
>>> +	thermal-zones {
>>> +		skin-temp-thermal {
>>> +			polling-delay-passive = <250>;
>>> +			polling-delay = <0>;
>>> +			thermal-sensors = <&pmk8280_adc_tm 5>;
>>> +
>>> +			trips {
>>> +				skin_temp_alert0: trip-point0 {
>>> +					temperature = <55000>;
>>> +					hysteresis = <1000>;
>>> +					type = "passive";
>>> +				};
>>> +
>>> +				skin_temp_alert1: trip-point1 {
>>> +					temperature = <58000>;
>>> +					hysteresis = <1000>;
>>> +					type = "passive";
>>> +				};
>>> +
>>> +				skin-temp-crit {
>>> +					temperature = <73000>;
>> Ouch, I didn't know we were serving burnt fingers at the cafeteria today :D
>>
>> Or maybe this just looks scary.. The laptop looks plastic, so maybe it won't cause instant
>> burns?
>>
> 73c is what the reasonable number I came up with after some experiments. At
> this point the temperature won't burn your finger but crossing this surely
> would (that's what happening without this series).

Ok, then I suppose it's fine. Thanks!


Konrad

>
> Thanks,
> Mani
>
>> Konrad
>>> +					hysteresis = <1000>;
>>> +					type = "critical";
>>> +				};
>>> +			};
>>> +
>>> +			cooling-maps {
>>> +				map0 {
>>> +					trip = <&skin_temp_alert0>;
>>> +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>> +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>> +				};
>>> +
>>> +				map1 {
>>> +					trip = <&skin_temp_alert1>;
>>> +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>> +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>> +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
>>> +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
>>> +				};
>>> +			};
>>> +		};
>>> +	};
>>> +
>>>   	vreg_edp_bl: regulator-edp-bl {
>>>   		compatible = "regulator-fixed";
>>>
  
Manivannan Sadhasivam Nov. 3, 2022, 12:12 p.m. UTC | #5
On Thu, Nov 03, 2022 at 11:02:30AM +0100, Konrad Dybcio wrote:
> 
> On 03/11/2022 06:50, Manivannan Sadhasivam wrote:
> > On Sat, Oct 29, 2022 at 04:29:05PM +0200, Konrad Dybcio wrote:
> > > 
> > > On 29.10.2022 07:14, Manivannan Sadhasivam wrote:
> > > > Add thermal zone support by making use of the thermistor SYS_THERM6.
> > > > Based on experiments, this thermistor seems to reflect the actual
> > > > surface temperature of the laptop.
> > > > 
> > > > For the cooling device, all BIG CPU cores are throttle down to keep the
> > > s/throttle/throttled
> > > 
> > > Is it okay to let the 4xA78C run at full throttle in thermal emergencies though?
> > I don't get it. Can you elaborate?
> 
> 8280xp has 4xA78C and 4xX1C. You only added the latter ones to the cooling
> map.
> 

Right, that's because the first 4 cores doesn't contribute to thermal much and
thottling them doesn't yield any thermal gain.

Thanks,
Mani

> 
> > 
> > > > temperature at a sane level.
> > > > 
> > > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > > ---
> > > >   .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts    | 46 +++++++++++++++++++
> > > >   1 file changed, 46 insertions(+)
> > > > 
> > > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > > > index ca77c19c6d0d..96e2fa72f782 100644
> > > > --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > > > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> > > > @@ -29,6 +29,52 @@ backlight {
> > > >   		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
> > > >   	};
> > > > +	thermal-zones {
> > > > +		skin-temp-thermal {
> > > > +			polling-delay-passive = <250>;
> > > > +			polling-delay = <0>;
> > > > +			thermal-sensors = <&pmk8280_adc_tm 5>;
> > > > +
> > > > +			trips {
> > > > +				skin_temp_alert0: trip-point0 {
> > > > +					temperature = <55000>;
> > > > +					hysteresis = <1000>;
> > > > +					type = "passive";
> > > > +				};
> > > > +
> > > > +				skin_temp_alert1: trip-point1 {
> > > > +					temperature = <58000>;
> > > > +					hysteresis = <1000>;
> > > > +					type = "passive";
> > > > +				};
> > > > +
> > > > +				skin-temp-crit {
> > > > +					temperature = <73000>;
> > > Ouch, I didn't know we were serving burnt fingers at the cafeteria today :D
> > > 
> > > Or maybe this just looks scary.. The laptop looks plastic, so maybe it won't cause instant
> > > burns?
> > > 
> > 73c is what the reasonable number I came up with after some experiments. At
> > this point the temperature won't burn your finger but crossing this surely
> > would (that's what happening without this series).
> 
> Ok, then I suppose it's fine. Thanks!
> 
> 
> Konrad
> 
> > 
> > Thanks,
> > Mani
> > 
> > > Konrad
> > > > +					hysteresis = <1000>;
> > > > +					type = "critical";
> > > > +				};
> > > > +			};
> > > > +
> > > > +			cooling-maps {
> > > > +				map0 {
> > > > +					trip = <&skin_temp_alert0>;
> > > > +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > > > +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > > > +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > > > +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > > > +				};
> > > > +
> > > > +				map1 {
> > > > +					trip = <&skin_temp_alert1>;
> > > > +					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > > > +							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > > > +							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > > > +							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > > > +				};
> > > > +			};
> > > > +		};
> > > > +	};
> > > > +
> > > >   	vreg_edp_bl: regulator-edp-bl {
> > > >   		compatible = "regulator-fixed";
  

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index ca77c19c6d0d..96e2fa72f782 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -29,6 +29,52 @@  backlight {
 		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
 	};
 
+	thermal-zones {
+		skin-temp-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			thermal-sensors = <&pmk8280_adc_tm 5>;
+
+			trips {
+				skin_temp_alert0: trip-point0 {
+					temperature = <55000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin_temp_alert1: trip-point1 {
+					temperature = <58000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
+				skin-temp-crit {
+					temperature = <73000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&skin_temp_alert0>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&skin_temp_alert1>;
+					cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	vreg_edp_bl: regulator-edp-bl {
 		compatible = "regulator-fixed";