[net-next,v2,6/7] net: dsa: mv88e6xxx: pass mv88e6xxx_chip structure to port_max_speed_mode
Commit Message
From: Alexis Lothoré <alexis.lothore@bootlin.com>
Some switches families have minor differences on supported link speed for
ports. Instead of redefining a new port_max_speed_mode for each different
configuration, allow to pass mv88e6xxx_chip structure to allow
differentiating those chips by known chip id
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
---
drivers/net/dsa/mv88e6xxx/chip.c | 2 +-
drivers/net/dsa/mv88e6xxx/chip.h | 3 ++-
drivers/net/dsa/mv88e6xxx/port.c | 12 ++++++++----
drivers/net/dsa/mv88e6xxx/port.h | 12 ++++++++----
4 files changed, 19 insertions(+), 10 deletions(-)
Comments
On 5/19/2023 7:13 AM, alexis.lothore@bootlin.com wrote:
> From: Alexis Lothoré <alexis.lothore@bootlin.com>
>
> Some switches families have minor differences on supported link speed for
> ports. Instead of redefining a new port_max_speed_mode for each different
> configuration, allow to pass mv88e6xxx_chip structure to allow
> differentiating those chips by known chip id
>
> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
@@ -3311,7 +3311,7 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port)
caps = pl_config.mac_capabilities;
if (chip->info->ops->port_max_speed_mode)
- mode = chip->info->ops->port_max_speed_mode(port);
+ mode = chip->info->ops->port_max_speed_mode(chip, port);
else
mode = PHY_INTERFACE_MODE_NA;
@@ -518,7 +518,8 @@ struct mv88e6xxx_ops {
int speed, int duplex);
/* What interface mode should be used for maximum speed? */
- phy_interface_t (*port_max_speed_mode)(int port);
+ phy_interface_t (*port_max_speed_mode)(struct mv88e6xxx_chip *chip,
+ int port);
int (*port_tag_remap)(struct mv88e6xxx_chip *chip, int port);
@@ -342,7 +342,8 @@ int mv88e6341_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
duplex);
}
-phy_interface_t mv88e6341_port_max_speed_mode(int port)
+phy_interface_t mv88e6341_port_max_speed_mode(struct mv88e6xxx_chip *chip,
+ int port)
{
if (port == 5)
return PHY_INTERFACE_MODE_2500BASEX;
@@ -381,7 +382,8 @@ int mv88e6390_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
duplex);
}
-phy_interface_t mv88e6390_port_max_speed_mode(int port)
+phy_interface_t mv88e6390_port_max_speed_mode(struct mv88e6xxx_chip *chip,
+ int port)
{
if (port == 9 || port == 10)
return PHY_INTERFACE_MODE_2500BASEX;
@@ -403,7 +405,8 @@ int mv88e6390x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
duplex);
}
-phy_interface_t mv88e6390x_port_max_speed_mode(int port)
+phy_interface_t mv88e6390x_port_max_speed_mode(struct mv88e6xxx_chip *chip,
+ int port)
{
if (port == 9 || port == 10)
return PHY_INTERFACE_MODE_XAUI;
@@ -500,7 +503,8 @@ int mv88e6393x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
return 0;
}
-phy_interface_t mv88e6393x_port_max_speed_mode(int port)
+phy_interface_t mv88e6393x_port_max_speed_mode(struct mv88e6xxx_chip *chip,
+ int port)
{
if (port == 0 || port == 9 || port == 10)
return PHY_INTERFACE_MODE_10GBASER;
@@ -359,10 +359,14 @@ int mv88e6390x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
int mv88e6393x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
int speed, int duplex);
-phy_interface_t mv88e6341_port_max_speed_mode(int port);
-phy_interface_t mv88e6390_port_max_speed_mode(int port);
-phy_interface_t mv88e6390x_port_max_speed_mode(int port);
-phy_interface_t mv88e6393x_port_max_speed_mode(int port);
+phy_interface_t mv88e6341_port_max_speed_mode(struct mv88e6xxx_chip *chip,
+ int port);
+phy_interface_t mv88e6390_port_max_speed_mode(struct mv88e6xxx_chip *chip,
+ int port);
+phy_interface_t mv88e6390x_port_max_speed_mode(struct mv88e6xxx_chip *chip,
+ int port);
+phy_interface_t mv88e6393x_port_max_speed_mode(struct mv88e6xxx_chip *chip,
+ int port);
int mv88e6xxx_port_set_state(struct mv88e6xxx_chip *chip, int port, u8 state);