dt-bindings: pwm: brcm,kona-pwm: convert to YAML

Message ID 20230508085727.GA7252@standask-GA-A55M-S2HP
State New
Headers
Series dt-bindings: pwm: brcm,kona-pwm: convert to YAML |

Commit Message

Stanislav Jakubek May 8, 2023, 8:57 a.m. UTC
  Convert Broadcom Kona family PWM controller bindings to DT schema.

Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
---
 .../devicetree/bindings/pwm/brcm,kona-pwm.txt | 21 --------
 .../bindings/pwm/brcm,kona-pwm.yaml           | 51 +++++++++++++++++++
 2 files changed, 51 insertions(+), 21 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt
 create mode 100644 Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
  

Comments

Krzysztof Kozlowski May 8, 2023, 9:16 a.m. UTC | #1
On 08/05/2023 10:57, Stanislav Jakubek wrote:
> Convert Broadcom Kona family PWM controller bindings to DT schema.

Please mention in the commit log changes to original binding. You added
new compatible.

> 
> Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
> ---
>  .../devicetree/bindings/pwm/brcm,kona-pwm.txt | 21 --------
>  .../bindings/pwm/brcm,kona-pwm.yaml           | 51 +++++++++++++++++++
>  2 files changed, 51 insertions(+), 21 deletions(-)


Best regards,
Krzysztof
  
Rob Herring May 8, 2023, 9:27 a.m. UTC | #2
On Mon, 08 May 2023 10:57:27 +0200, Stanislav Jakubek wrote:
> Convert Broadcom Kona family PWM controller bindings to DT schema.
> 
> Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
> ---
>  .../devicetree/bindings/pwm/brcm,kona-pwm.txt | 21 --------
>  .../bindings/pwm/brcm,kona-pwm.yaml           | 51 +++++++++++++++++++
>  2 files changed, 51 insertions(+), 21 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt
>  create mode 100644 Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: camera@3c: port:endpoint:data-lanes: [[1]] is too short
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.example.dtb: camera-sensor@3c: port:endpoint:data-lanes: [[1]] is too short
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.example.dtb: pcie-ep@33800000: Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml

doc reference errors (make refcheckdocs):
Documentation/usb/gadget_uvc.rst: Documentation/userspace-api/media/v4l/pixfmt-packed.yuv.rst
MAINTAINERS: Documentation/devicetree/bindings/pwm/pwm-apple.yaml

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230508085727.GA7252@standask-GA-A55M-S2HP

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
  

Patch

diff --git a/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt b/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt
deleted file mode 100644
index c42eecfc81ed..000000000000
--- a/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt
+++ /dev/null
@@ -1,21 +0,0 @@ 
-Broadcom Kona PWM controller device tree bindings
-
-This controller has 6 channels.
-
-Required Properties :
-- compatible: should contain "brcm,kona-pwm"
-- reg: physical base address and length of the controller's registers
-- clocks: phandle + clock specifier pair for the external clock
-- #pwm-cells: Should be 3. See pwm.yaml in this directory for a
-  description of the cells format.
-
-Refer to clocks/clock-bindings.txt for generic clock consumer properties.
-
-Example:
-
-pwm: pwm@3e01a000 {
-	compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
-	reg = <0x3e01a000 0xc4>;
-	clocks = <&pwm_clk>;
-	#pwm-cells = <3>;
-};
diff --git a/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml b/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
new file mode 100644
index 000000000000..d1a58d130708
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.yaml
@@ -0,0 +1,51 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/brcm,kona-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Kona family PWM controller
+
+description:
+  This controller has 6 channels.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm11351-pwm
+      - const: brcm,kona-pwm
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  '#pwm-cells':
+    const: 3
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include "dt-bindings/clock/bcm281xx.h"
+
+    pwm@3e01a000 {
+       compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm";
+       reg = <0x3e01a000 0xcc>;
+       clocks = <&slave_ccu BCM281XX_SLAVE_CCU_PWM>;
+       #pwm-cells = <3>;
+    };
+...