[net-next] net: hinic: Add support for configuration of rx-vlan-filter by ethtool
Commit Message
When ethtool config rx-vlan-filter: 'ethtool -K ethx rx-vlan-filter on/off'
to turn on/off the vlan filter, the driver will send control command to firmware,
then set to hardware in this patch.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
---
.../net/ethernet/huawei/hinic/hinic_main.c | 10 ++++++
.../net/ethernet/huawei/hinic/hinic_port.c | 33 +++++++++++++++++++
.../net/ethernet/huawei/hinic/hinic_port.h | 12 +++++++
3 files changed, 55 insertions(+)
Comments
On Mon, 31 Oct 2022 15:47:03 +0800 Cai Huoqing wrote:
> When ethtool config rx-vlan-filter: 'ethtool -K ethx rx-vlan-filter on/off'
> to turn on/off the vlan filter, the driver will send control command to firmware,
> then set to hardware in this patch.
This patch depends on a definition added in your other set.
Please repost once that gets merged, otherwise it doesn't build.
@@ -1092,6 +1092,16 @@ static int set_features(struct hinic_dev *nic_dev,
}
}
+ if (changed & NETIF_F_HW_VLAN_CTAG_FILTER) {
+ ret = hinic_set_vlan_fliter(nic_dev,
+ !!(features &
+ NETIF_F_HW_VLAN_CTAG_FILTER));
+ if (ret) {
+ err = ret;
+ failed_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+ }
+ }
+
if (err) {
nic_dev->netdev->features = features ^ failed_features;
return -EIO;
@@ -447,6 +447,39 @@ int hinic_set_rx_vlan_offload(struct hinic_dev *nic_dev, u8 en)
return 0;
}
+int hinic_set_vlan_fliter(struct hinic_dev *nic_dev, u32 en)
+{
+ struct hinic_hwdev *hwdev = nic_dev->hwdev;
+ struct hinic_hwif *hwif = hwdev->hwif;
+ struct pci_dev *pdev = hwif->pdev;
+ struct hinic_vlan_filter vlan_filter;
+ u16 out_size = sizeof(vlan_filter);
+ int err;
+
+ if (!hwdev)
+ return -EINVAL;
+
+ vlan_filter.func_idx = HINIC_HWIF_FUNC_IDX(hwif);
+ vlan_filter.enable = en;
+
+ err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_SET_VLAN_FILTER,
+ &vlan_filter, sizeof(vlan_filter),
+ &vlan_filter, &out_size);
+ if (vlan_filter.status == HINIC_MGMT_CMD_UNSUPPORTED) {
+ err = HINIC_MGMT_CMD_UNSUPPORTED;
+ } else if ((err == HINIC_MBOX_VF_CMD_ERROR) &&
+ HINIC_IS_VF(hwif)) {
+ err = HINIC_MGMT_CMD_UNSUPPORTED;
+ } else if (err || !out_size || vlan_filter.status) {
+ dev_err(&pdev->dev,
+ "Failed to set vlan fliter, err: %d, status: 0x%x, out size: 0x%x\n",
+ err, vlan_filter.status, out_size);
+ err = -EINVAL;
+ }
+
+ return err;
+}
+
int hinic_set_max_qnum(struct hinic_dev *nic_dev, u8 num_rqs)
{
struct hinic_hwdev *hwdev = nic_dev->hwdev;
@@ -351,6 +351,16 @@ struct hinic_vlan_cfg {
u8 rsvd1[5];
};
+struct hinic_vlan_filter {
+ u8 status;
+ u8 version;
+ u8 rsvd0[6];
+
+ u16 func_idx;
+ u8 rsvd1[2];
+ u32 enable;
+};
+
struct hinic_rss_template_mgmt {
u8 status;
u8 version;
@@ -831,6 +841,8 @@ int hinic_get_vport_stats(struct hinic_dev *nic_dev,
int hinic_set_rx_vlan_offload(struct hinic_dev *nic_dev, u8 en);
+int hinic_set_vlan_fliter(struct hinic_dev *nic_dev, u32 en);
+
int hinic_get_mgmt_version(struct hinic_dev *nic_dev, u8 *mgmt_ver);
int hinic_set_link_settings(struct hinic_hwdev *hwdev,