[v3,05/12] dt-bindings: display/msm: Add SM6375 MDSS
Commit Message
Document the SM6375 MDSS.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
.../bindings/display/msm/qcom,sm6375-mdss.yaml | 216 +++++++++++++++++++++
1 file changed, 216 insertions(+)
Comments
On Fri, 05 May 2023 23:40:31 +0200, Konrad Dybcio wrote:
> Document the SM6375 MDSS.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
> .../bindings/display/msm/qcom,sm6375-mdss.yaml | 216 +++++++++++++++++++++
> 1 file changed, 216 insertions(+)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.example.dtb: dsi@5e94000: compatible: 'oneOf' conditional failed, one must be fixed:
'qcom,sm6375-dsi-ctrl' is not one of ['qcom,apq8064-dsi-ctrl', 'qcom,msm8916-dsi-ctrl', 'qcom,msm8953-dsi-ctrl', 'qcom,msm8974-dsi-ctrl', 'qcom,msm8996-dsi-ctrl', 'qcom,msm8998-dsi-ctrl', 'qcom,qcm2290-dsi-ctrl', 'qcom,sc7180-dsi-ctrl', 'qcom,sc7280-dsi-ctrl', 'qcom,sdm660-dsi-ctrl', 'qcom,sdm845-dsi-ctrl', 'qcom,sm8150-dsi-ctrl', 'qcom,sm8250-dsi-ctrl', 'qcom,sm8350-dsi-ctrl', 'qcom,sm8450-dsi-ctrl', 'qcom,sm8550-dsi-ctrl']
'qcom,sm6375-dsi-ctrl' is not one of ['dsi-ctrl-6g-qcm2290']
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.example.dtb: dsi@5e94000: Unevaluated properties are not allowed ('compatible' was unexpected)
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230411-topic-straitlagoon_mdss-v3-5-9837d6b3516d@linaro.org
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
On 05/05/2023 23:40, Konrad Dybcio wrote:
> Document the SM6375 MDSS.
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
> .../bindings/display/msm/qcom,sm6375-mdss.yaml | 216 +++++++++++++++++++++
> 1 file changed, 216 insertions(+)
>
Thank you for your patch. There is something to discuss/improve.
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,rpmcc.h>
> + #include <dt-bindings/clock/qcom,sm6375-gcc.h>
> + #include <dt-bindings/clock/qcom,sm6375-dispcc.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/qcom-rpmpd.h>
> +
> + display-subsystem@5e00000 {
> + compatible = "qcom,sm6375-mdss";
> + reg = <0x05e00000 0x1000>;
> + reg-names = "mdss";
> +
> + power-domains = <&dispcc MDSS_GDSC>;
> +
> + clocks = <&gcc GCC_DISP_AHB_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_CLK>;
> + clock-names = "iface", "ahb", "core";
> +
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + iommus = <&apps_smmu 0x820 0x2>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + display-controller@5e01000 {
> + compatible = "qcom,sm6375-dpu";
> + reg = <0x05e01000 0x8e030>,
> + <0x05eb0000 0x2008>;
> + reg-names = "mdp", "vbif";
> +
> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&gcc GCC_DISP_HF_AXI_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
> + <&dispcc DISP_CC_MDSS_ROT_CLK>,
> + <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
> + <&gcc GCC_DISP_THROTTLE_CORE_CLK>;
> + clock-names = "iface",
> + "bus",
> + "core",
> + "lut",
> + "rot",
> + "vsync",
> + "throttle";
Are you sure you have clocks in correct order? I see warnings...
Best regards,
Krzysztof
On 7.05.2023 10:20, Krzysztof Kozlowski wrote:
> On 05/05/2023 23:40, Konrad Dybcio wrote:
>> Document the SM6375 MDSS.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
>> ---
>> .../bindings/display/msm/qcom,sm6375-mdss.yaml | 216 +++++++++++++++++++++
>> 1 file changed, 216 insertions(+)
>>
>
> Thank you for your patch. There is something to discuss/improve.
>
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/clock/qcom,rpmcc.h>
>> + #include <dt-bindings/clock/qcom,sm6375-gcc.h>
>> + #include <dt-bindings/clock/qcom,sm6375-dispcc.h>
>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>> + #include <dt-bindings/power/qcom-rpmpd.h>
>> +
>> + display-subsystem@5e00000 {
>> + compatible = "qcom,sm6375-mdss";
>> + reg = <0x05e00000 0x1000>;
>> + reg-names = "mdss";
>> +
>> + power-domains = <&dispcc MDSS_GDSC>;
>> +
>> + clocks = <&gcc GCC_DISP_AHB_CLK>,
>> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
>> + <&dispcc DISP_CC_MDSS_MDP_CLK>;
>> + clock-names = "iface", "ahb", "core";
>> +
>> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-controller;
>> + #interrupt-cells = <1>;
>> +
>> + iommus = <&apps_smmu 0x820 0x2>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + display-controller@5e01000 {
>> + compatible = "qcom,sm6375-dpu";
>> + reg = <0x05e01000 0x8e030>,
>> + <0x05eb0000 0x2008>;
>> + reg-names = "mdp", "vbif";
>> +
>> + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
>> + <&gcc GCC_DISP_HF_AXI_CLK>,
>> + <&dispcc DISP_CC_MDSS_MDP_CLK>,
>> + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
>> + <&dispcc DISP_CC_MDSS_ROT_CLK>,
>> + <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
>> + <&gcc GCC_DISP_THROTTLE_CORE_CLK>;
>> + clock-names = "iface",
>> + "bus",
>> + "core",
>> + "lut",
>> + "rot",
>> + "vsync",
>> + "throttle";
>
> Are you sure you have clocks in correct order? I see warnings...
Right, testing *both* the DTs and bindings after making changes sounds
like a good thing to stop forgetting..
Konrad
>
> Best regards,
> Krzysztof
>
new file mode 100644
@@ -0,0 +1,216 @@
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sm6375-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM6375 Display MDSS
+
+maintainers:
+ - Konrad Dybcio <konrad.dybcio@linaro.org>
+
+description:
+ SM6375 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+ like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,sm6375-mdss
+
+ clocks:
+ items:
+ - description: Display AHB clock from gcc
+ - description: Display AHB clock
+ - description: Display core clock
+
+ clock-names:
+ items:
+ - const: iface
+ - const: ahb
+ - const: core
+
+ iommus:
+ maxItems: 1
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ maxItems: 2
+
+patternProperties:
+ "^display-controller@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm6375-dpu
+
+ "^dsi@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ items:
+ - const: qcom,sm6375-dsi-ctrl
+ - const: qcom,mdss-dsi-ctrl
+
+ "^phy@[0-9a-f]+$":
+ type: object
+ properties:
+ compatible:
+ const: qcom,sm6375-dsi-phy-7nm
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,rpmcc.h>
+ #include <dt-bindings/clock/qcom,sm6375-gcc.h>
+ #include <dt-bindings/clock/qcom,sm6375-dispcc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ display-subsystem@5e00000 {
+ compatible = "qcom,sm6375-mdss";
+ reg = <0x05e00000 0x1000>;
+ reg-names = "mdss";
+
+ power-domains = <&dispcc MDSS_GDSC>;
+
+ clocks = <&gcc GCC_DISP_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+ clock-names = "iface", "ahb", "core";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ iommus = <&apps_smmu 0x820 0x2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ display-controller@5e01000 {
+ compatible = "qcom,sm6375-dpu";
+ reg = <0x05e01000 0x8e030>,
+ <0x05eb0000 0x2008>;
+ reg-names = "mdp", "vbif";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_ROT_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
+ <&gcc GCC_DISP_THROTTLE_CORE_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core",
+ "lut",
+ "rot",
+ "vsync",
+ "throttle";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+ power-domains = <&rpmpd SM6375_VDDCX>;
+
+ interrupt-parent = <&mdss>;
+ interrupts = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_intf2_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
+
+ dsi@5e94000 {
+ compatible = "qcom,sm6375-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x05e94000 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+ operating-points-v2 = <&dsi_opp_table>;
+ power-domains = <&rpmpd SM6375_VDDMX>;
+
+ phys = <&mdss_dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@5e94400 {
+ compatible = "qcom,sm6375-dsi-phy-7nm";
+ reg = <0x05e94400 0x200>,
+ <0x05e94600 0x280>,
+ <0x05e94900 0x264>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>;
+ clock-names = "iface", "ref";
+ };
+ };
+...