[v2,1/2] hisi_acc_vfio_pci: Add debugfs to migration driver
Commit Message
There are multiple devices, software and operational steps involved
in the process of live migration. An error occurred on any node may
cause the live migration operation to fail.
This complex process makes it very difficult to locate and analyze
the cause when the function fails.
In order to quickly locate the cause of the problem when the
live migration fails, I added a set of debugfs to the accelerator
live migration driver.
+-----------------------------------+
| |
| QEMU |
| |
+---+--^--------------------+--^----+
| | | |
| | | |
+---v--+----+ +---v--+----+
| | | |
| src VF | | dest VF |
| | | |
+---+--^----+ +---+--^----+
| | | |
| | | |
+---v--+----+ +---v--+----+
| Debugfs | | Debugfs |
+-----+-----+ +-----+-----+
|state|debug| |state|debug|
+-----+-----+ +-----+-----+
This set of debugfs will create two files for each VF device:
a state file and a debug file.
The migration status of the current VF device can be obtained by
reading the status file.
The live migration function of the current device can be tested by
operating the debug file, and the functional status of the equipment
and software at each stage can be tested step by step without
performing the complete live migration function. And after the live
migration is performed, the migration device data of the live migration
can be obtained through the debug file.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
---
.../vfio/pci/hisilicon/hisi_acc_vfio_pci.c | 314 +++++++++++++++++-
.../vfio/pci/hisilicon/hisi_acc_vfio_pci.h | 14 +
2 files changed, 326 insertions(+), 2 deletions(-)
Comments
kindly ping!
On 2022/10/19 16:10, Longfang Liu wrote:
> There are multiple devices, software and operational steps involved
> in the process of live migration. An error occurred on any node may
> cause the live migration operation to fail.
> This complex process makes it very difficult to locate and analyze
> the cause when the function fails.
>
> In order to quickly locate the cause of the problem when the
> live migration fails, I added a set of debugfs to the accelerator
> live migration driver.
>
> +-----------------------------------+
> | |
> | QEMU |
> | |
> +---+--^--------------------+--^----+
> | | | |
> | | | |
> +---v--+----+ +---v--+----+
> | | | |
> | src VF | | dest VF |
> | | | |
> +---+--^----+ +---+--^----+
> | | | |
> | | | |
> +---v--+----+ +---v--+----+
> | Debugfs | | Debugfs |
> +-----+-----+ +-----+-----+
> |state|debug| |state|debug|
> +-----+-----+ +-----+-----+
>
> This set of debugfs will create two files for each VF device:
> a state file and a debug file.
>
> The migration status of the current VF device can be obtained by
> reading the status file.
>
> The live migration function of the current device can be tested by
> operating the debug file, and the functional status of the equipment
> and software at each stage can be tested step by step without
> performing the complete live migration function. And after the live
> migration is performed, the migration device data of the live migration
> can be obtained through the debug file.
>
> Signed-off-by: Longfang Liu <liulongfang@huawei.com>
> ---
> .../vfio/pci/hisilicon/hisi_acc_vfio_pci.c | 314 +++++++++++++++++-
> .../vfio/pci/hisilicon/hisi_acc_vfio_pci.h | 14 +
> 2 files changed, 326 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
> index 39eeca18a0f7..eedf8fdf4403 100644
> --- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
> +++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
> @@ -3,6 +3,7 @@
> * Copyright (c) 2021, HiSilicon Ltd.
> */
>
> +#include <linux/anon_inodes.h>
> #include <linux/device.h>
> #include <linux/eventfd.h>
> #include <linux/file.h>
> @@ -16,6 +17,9 @@
>
> #include "hisi_acc_vfio_pci.h"
>
> +static struct dentry *hisi_acc_debugfs_root;
> +static atomic_t hisi_acc_root_ref;
> +
> /* Return 0 on VM acc device ready, -ETIMEDOUT hardware timeout */
> static int qm_wait_dev_not_ready(struct hisi_qm *qm)
> {
> @@ -609,6 +613,18 @@ hisi_acc_check_int_state(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> }
> }
>
> +static void hisi_acc_vf_migf_save(struct hisi_acc_vf_migration_file *src_migf,
> + struct hisi_acc_vf_migration_file *dst_migf)
> +{
> + if (!dst_migf)
> + return;
> +
> + dst_migf->disabled = false;
> + dst_migf->total_length = src_migf->total_length;
> + memcpy(&dst_migf->vf_data, &src_migf->vf_data,
> + sizeof(struct acc_vf_data));
> +}
> +
> static void hisi_acc_vf_disable_fd(struct hisi_acc_vf_migration_file *migf)
> {
> mutex_lock(&migf->lock);
> @@ -621,12 +637,16 @@ static void hisi_acc_vf_disable_fd(struct hisi_acc_vf_migration_file *migf)
> static void hisi_acc_vf_disable_fds(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> {
> if (hisi_acc_vdev->resuming_migf) {
> + hisi_acc_vf_migf_save(hisi_acc_vdev->resuming_migf,
> + hisi_acc_vdev->debug_migf);
> hisi_acc_vf_disable_fd(hisi_acc_vdev->resuming_migf);
> fput(hisi_acc_vdev->resuming_migf->filp);
> hisi_acc_vdev->resuming_migf = NULL;
> }
>
> if (hisi_acc_vdev->saving_migf) {
> + hisi_acc_vf_migf_save(hisi_acc_vdev->saving_migf,
> + hisi_acc_vdev->debug_migf);
> hisi_acc_vf_disable_fd(hisi_acc_vdev->saving_migf);
> fput(hisi_acc_vdev->saving_migf->filp);
> hisi_acc_vdev->saving_migf = NULL;
> @@ -1176,6 +1196,269 @@ static long hisi_acc_vfio_pci_ioctl(struct vfio_device *core_vdev, unsigned int
> return vfio_pci_core_ioctl(core_vdev, cmd, arg);
> }
>
> +static int hisi_acc_vf_debug_create(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> +{
> + struct hisi_acc_vf_migration_file *migf;
> +
> + migf = kzalloc(sizeof(*migf), GFP_KERNEL);
> + if (!migf)
> + return -ENOMEM;
> +
> + migf->disabled = false;
> + hisi_acc_vdev->debug_migf = migf;
> + mutex_init(&migf->lock);
> +
> + return 0;
> +}
> +
> +static void hisi_acc_vf_debug_release(struct hisi_acc_vf_migration_file *migf)
> +{
> + migf->disabled = true;
> + migf->total_length = 0;
> + mutex_destroy(&migf->lock);
> + kfree(migf);
> +}
> +
> +static int hisi_acc_vf_debug_test(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> +{
> + struct device *dev = &hisi_acc_vdev->vf_dev->dev;
> + struct hisi_qm *vf_qm = &hisi_acc_vdev->vf_qm;
> + u64 data;
> + int ret;
> +
> + data = readl(vf_qm->io_base + QM_MB_CMD_SEND_BASE);
> + dev_info(dev, "debug mailbox val: 0x%llx\n", data);
> +
> + ret = qm_wait_dev_not_ready(vf_qm);
> + if (ret)
> + dev_err(dev, "VF device not ready!\n");
> +
> + return ret;
> +}
> +
> +static ssize_t hisi_acc_vf_debug_read(struct file *filp, char __user *buffer,
> + size_t count, loff_t *pos)
> +{
> + char buf[VFIO_DEV_DBG_LEN];
> + int len;
> +
> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
> + "echo 0: test vf state save\n"
> + "echo 1: test vf state resume\n"
> + "echo 2: test vf send mailbox\n"
> + "echo 3: dump vf config data\n"
> + "echo 4: dump vf migration state\n");
> +
> + return simple_read_from_buffer(buffer, count, pos, buf, len);
> +}
> +
> +static void hisi_acc_vf_dev_data_dump(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> +{
> + size_t vf_data_sz = offsetofend(struct acc_vf_data, padding);
> + struct device *dev = &hisi_acc_vdev->vf_dev->dev;
> +
> + if (hisi_acc_vdev->debug_migf &&
> + hisi_acc_vdev->debug_migf->total_length) {
> + print_hex_dump(KERN_INFO, "dev mig data:",
> + DUMP_PREFIX_OFFSET, 16, 1,
> + (u8 *)&hisi_acc_vdev->debug_migf->vf_data,
> + vf_data_sz, false);
> + } else {
> + dev_info(dev, "device not migrated!\n");
> + }
> +}
> +
> +static void hisi_acc_vf_dev_attr_show(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> +{
> + struct device *dev = &hisi_acc_vdev->vf_dev->dev;
> +
> + if (hisi_acc_vdev->debug_migf &&
> + hisi_acc_vdev->debug_migf->total_length) {
> + dev_info(dev, "acc device:\n"
> + "device state: %d\n"
> + "device ready: %u\n"
> + "data valid: %d\n"
> + "data size: %lu\n",
> + hisi_acc_vdev->mig_state,
> + hisi_acc_vdev->vf_qm_state,
> + hisi_acc_vdev->debug_migf->disabled,
> + hisi_acc_vdev->debug_migf->total_length);
> + } else {
> + dev_info(dev, "device not migrated!\n");
> + }
> +}
> +
> +static int hisi_acc_vf_debug_resume(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> +{
> + struct hisi_acc_vf_migration_file *migf = hisi_acc_vdev->debug_migf;
> + struct device *dev = &hisi_acc_vdev->vf_dev->dev;
> + int ret;
> +
> + ret = vf_qm_state_save(hisi_acc_vdev, migf);
> + if (ret) {
> + dev_err(dev, "failed to save device data!\n");
> + return -EINVAL;
> + }
> +
> + ret = vf_qm_check_match(hisi_acc_vdev, migf);
> + if (ret) {
> + dev_err(dev, "failed to match the VF!\n");
> + return -EINVAL;
> + }
> +
> + ret = vf_qm_load_data(hisi_acc_vdev, migf);
> + if (ret) {
> + dev_err(dev, "failed to recover the VF!\n");
> + return -EINVAL;
> + }
> +
> + vf_qm_fun_reset(&hisi_acc_vdev->vf_qm);
> + dev_info(dev, "successful to resume device data!\n");
> +
> + return 0;
> +}
> +
> +static int hisi_acc_vf_debug_save(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> +{
> + struct hisi_acc_vf_migration_file *migf = hisi_acc_vdev->debug_migf;
> + struct device *dev = &hisi_acc_vdev->vf_dev->dev;
> + int ret;
> +
> + ret = vf_qm_state_save(hisi_acc_vdev, migf);
> + if (ret) {
> + dev_err(dev, "failed to save device data!\n");
> + return -EINVAL;
> + }
> + dev_info(dev, "successful to save device data!\n");
> +
> + return 0;
> +}
> +
> +static ssize_t hisi_acc_vf_debug_write(struct file *filp, const char __user *buffer,
> + size_t count, loff_t *pos)
> +{
> + struct hisi_acc_vf_core_device *hisi_acc_vdev = filp->private_data;
> + char tbuf[VFIO_DEV_DBG_LEN];
> + unsigned long val;
> + int len, ret;
> +
> + if (*pos)
> + return 0;
> +
> + if (count >= VFIO_DEV_DBG_LEN)
> + return -ENOSPC;
> +
> + len = simple_write_to_buffer(tbuf, VFIO_DEV_DBG_LEN - 1,
> + pos, buffer, count);
> + if (len < 0 || len > VFIO_DEV_DBG_LEN - 1)
> + return -EINVAL;
> + tbuf[len] = '\0';
> + if (kstrtoul(tbuf, 0, &val))
> + return -EFAULT;
> +
> + switch (val) {
> + case STATE_SAVE:
> + ret = hisi_acc_vf_debug_save(hisi_acc_vdev);
> + if (ret)
> + return ret;
> + break;
> + case STATE_RESUME:
> + ret = hisi_acc_vf_debug_resume(hisi_acc_vdev);
> + if (ret)
> + return ret;
> + break;
> + case MB_TEST:
> + ret = hisi_acc_vf_debug_test(hisi_acc_vdev);
> + if (ret)
> + return -EINVAL;
> + break;
> + case MIG_DATA_DUMP:
> + hisi_acc_vf_dev_data_dump(hisi_acc_vdev);
> + break;
> + case MIG_DEV_SHOW:
> + hisi_acc_vf_dev_attr_show(hisi_acc_vdev);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return count;
> +}
> +
> +static const struct file_operations hisi_acc_vf_debug_fops = {
> + .owner = THIS_MODULE,
> + .open = simple_open,
> + .read = hisi_acc_vf_debug_read,
> + .write = hisi_acc_vf_debug_write,
> +};
> +
> +static ssize_t hisi_acc_vf_state_read(struct file *filp, char __user *buffer,
> + size_t count, loff_t *pos)
> +{
> + struct hisi_acc_vf_core_device *hisi_acc_vdev = filp->private_data;
> + char buf[VFIO_DEV_DBG_LEN];
> + u32 state;
> + int len;
> +
> + state = hisi_acc_vdev->mig_state;
> + switch (state) {
> + case VFIO_DEVICE_STATE_RUNNING:
> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
> + "RUNNING\n");
> + break;
> + case VFIO_DEVICE_STATE_STOP_COPY:
> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
> + "STOP and COPYING\n");
> + break;
> + case VFIO_DEVICE_STATE_STOP:
> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
> + "STOP\n");
> + break;
> + case VFIO_DEVICE_STATE_RESUMING:
> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
> + "RESUMING\n");
> + break;
> + default:
> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
> + "Error\n");
> + }
> +
> + return simple_read_from_buffer(buffer, count, pos, buf, len);
> +}
> +
> +static const struct file_operations hisi_acc_vf_state_fops = {
> + .owner = THIS_MODULE,
> + .open = simple_open,
> + .read = hisi_acc_vf_state_read,
> +};
> +
> +static void hisi_acc_vf_debugfs_init(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> +{
> + struct pci_dev *vf_pdev = hisi_acc_vdev->vf_dev;
> + struct device *dev = &vf_pdev->dev;
> + int ret;
> +
> + hisi_acc_vdev->debug_root = debugfs_create_dir(dev_name(dev), hisi_acc_debugfs_root);
> + debugfs_create_file("state", 0444, hisi_acc_vdev->debug_root,
> + hisi_acc_vdev, &hisi_acc_vf_state_fops);
> +
> + ret = hisi_acc_vf_debug_create(hisi_acc_vdev);
> + if (ret) {
> + dev_err(dev, "failed to alloc migration debug node\n");
> + return;
> + }
> + debugfs_create_file("debug", 0644, hisi_acc_vdev->debug_root,
> + hisi_acc_vdev, &hisi_acc_vf_debug_fops);
> +}
> +
> +static void hisi_acc_vf_debugfs_exit(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> +{
> + if (hisi_acc_vdev->debug_migf)
> + hisi_acc_vf_debug_release(hisi_acc_vdev->debug_migf);
> +
> + debugfs_remove_recursive(hisi_acc_vdev->debug_root);
> +}
> +
> static int hisi_acc_vfio_pci_open_device(struct vfio_device *core_vdev)
> {
> struct hisi_acc_vf_core_device *hisi_acc_vdev = container_of(core_vdev,
> @@ -1268,7 +1551,7 @@ static int hisi_acc_vfio_pci_probe(struct pci_dev *pdev, const struct pci_device
> struct hisi_acc_vf_core_device *hisi_acc_vdev;
> const struct vfio_device_ops *ops = &hisi_acc_vfio_pci_ops;
> struct hisi_qm *pf_qm;
> - int vf_id;
> + int vf_id = -1;
> int ret;
>
> pf_qm = hisi_acc_get_pf_qm(pdev);
> @@ -1285,6 +1568,9 @@ static int hisi_acc_vfio_pci_probe(struct pci_dev *pdev, const struct pci_device
> if (IS_ERR(hisi_acc_vdev))
> return PTR_ERR(hisi_acc_vdev);
>
> + if (vf_id >= 0)
> + hisi_acc_vf_debugfs_init(hisi_acc_vdev);
> +
> dev_set_drvdata(&pdev->dev, &hisi_acc_vdev->core_device);
> ret = vfio_pci_core_register_device(&hisi_acc_vdev->core_device);
> if (ret)
> @@ -1300,6 +1586,7 @@ static void hisi_acc_vfio_pci_remove(struct pci_dev *pdev)
> {
> struct hisi_acc_vf_core_device *hisi_acc_vdev = hisi_acc_drvdata(pdev);
>
> + hisi_acc_vf_debugfs_exit(hisi_acc_vdev);
> vfio_pci_core_unregister_device(&hisi_acc_vdev->core_device);
> vfio_put_device(&hisi_acc_vdev->core_device.vdev);
> }
> @@ -1327,7 +1614,30 @@ static struct pci_driver hisi_acc_vfio_pci_driver = {
> .driver_managed_dma = true,
> };
>
> -module_pci_driver(hisi_acc_vfio_pci_driver);
> +static int __init hisi_acc_vfio_pci_init(void)
> +{
> + int ret;
> +
> + hisi_acc_debugfs_root = debugfs_create_dir("hisi_vfio_acc", NULL);
> +
> + ret = pci_register_driver(&hisi_acc_vfio_pci_driver);
> + if (ret < 0) {
> + debugfs_remove_recursive(hisi_acc_debugfs_root);
> + pr_err("failed to register pci driver.\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void __exit hisi_acc_vfio_pci_exit(void)
> +{
> + pci_unregister_driver(&hisi_acc_vfio_pci_driver);
> + debugfs_remove_recursive(hisi_acc_debugfs_root);
> +}
> +
> +module_init(hisi_acc_vfio_pci_init);
> +module_exit(hisi_acc_vfio_pci_exit);
>
> MODULE_LICENSE("GPL v2");
> MODULE_AUTHOR("Liu Longfang <liulongfang@huawei.com>");
> diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
> index 67343325b320..ae2a686c2e4d 100644
> --- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
> +++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
> @@ -4,8 +4,11 @@
> #ifndef HISI_ACC_VFIO_PCI_H
> #define HISI_ACC_VFIO_PCI_H
>
> +#include <linux/debugfs.h>
> #include <linux/hisi_acc_qm.h>
>
> +#define VFIO_DEV_DBG_LEN 256
> +
> #define MB_POLL_PERIOD_US 10
> #define MB_POLL_TIMEOUT_US 1000
> #define QM_CACHE_WB_START 0x204
> @@ -49,6 +52,14 @@
> #define QM_EQC_DW0 0X8000
> #define QM_AEQC_DW0 0X8020
>
> +enum mig_debug_cmd {
> + STATE_SAVE,
> + STATE_RESUME,
> + MB_TEST,
> + MIG_DATA_DUMP,
> + MIG_DEV_SHOW,
> +};
> +
> struct acc_vf_data {
> #define QM_MATCH_SIZE offsetofend(struct acc_vf_data, qm_rsv_state)
> /* QM match information */
> @@ -111,5 +122,8 @@ struct hisi_acc_vf_core_device {
> spinlock_t reset_lock;
> struct hisi_acc_vf_migration_file *resuming_migf;
> struct hisi_acc_vf_migration_file *saving_migf;
> + /* For debugfs */
> + struct dentry *debug_root;
> + struct hisi_acc_vf_migration_file *debug_migf;
> };
> #endif /* HISI_ACC_VFIO_PCI_H */
>
[Cc +kvm list]
On Wed, 19 Oct 2022 16:10:32 +0800
Longfang Liu <liulongfang@huawei.com> wrote:
> There are multiple devices, software and operational steps involved
> in the process of live migration. An error occurred on any node may
> cause the live migration operation to fail.
> This complex process makes it very difficult to locate and analyze
> the cause when the function fails.
>
> In order to quickly locate the cause of the problem when the
> live migration fails, I added a set of debugfs to the accelerator
> live migration driver.
>
> +-----------------------------------+
> | |
> | QEMU |
> | |
> +---+--^--------------------+--^----+
> | | | |
> | | | |
> +---v--+----+ +---v--+----+
> | | | |
> | src VF | | dest VF |
> | | | |
> +---+--^----+ +---+--^----+
> | | | |
> | | | |
> +---v--+----+ +---v--+----+
> | Debugfs | | Debugfs |
> +-----+-----+ +-----+-----+
> |state|debug| |state|debug|
> +-----+-----+ +-----+-----+
>
> This set of debugfs will create two files for each VF device:
> a state file and a debug file.
>
> The migration status of the current VF device can be obtained by
> reading the status file.
>
> The live migration function of the current device can be tested by
> operating the debug file, and the functional status of the equipment
> and software at each stage can be tested step by step without
> performing the complete live migration function. And after the live
> migration is performed, the migration device data of the live migration
> can be obtained through the debug file.
This is proposed as an hisi_vfio_acc specific debugfs interface, but
common code could certainly implement much of this as well. Should we
have generic support for debugfs?
Some further comments and concerns below. Thanks,
Alex
> Signed-off-by: Longfang Liu <liulongfang@huawei.com>
> ---
> .../vfio/pci/hisilicon/hisi_acc_vfio_pci.c | 314 +++++++++++++++++-
> .../vfio/pci/hisilicon/hisi_acc_vfio_pci.h | 14 +
> 2 files changed, 326 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
> index 39eeca18a0f7..eedf8fdf4403 100644
> --- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
> +++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
> @@ -3,6 +3,7 @@
> * Copyright (c) 2021, HiSilicon Ltd.
> */
>
> +#include <linux/anon_inodes.h>
> #include <linux/device.h>
> #include <linux/eventfd.h>
> #include <linux/file.h>
> @@ -16,6 +17,9 @@
>
> #include "hisi_acc_vfio_pci.h"
>
> +static struct dentry *hisi_acc_debugfs_root;
> +static atomic_t hisi_acc_root_ref;
This is unused, causing a compile failure:
drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c:21:17: error: ‘hisi_acc_root_ref’ defined but not used [-Werror=unused-variable]
21 | static atomic_t hisi_acc_root_ref;
| ^~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
> +
> /* Return 0 on VM acc device ready, -ETIMEDOUT hardware timeout */
> static int qm_wait_dev_not_ready(struct hisi_qm *qm)
> {
> @@ -609,6 +613,18 @@ hisi_acc_check_int_state(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> }
> }
>
> +static void hisi_acc_vf_migf_save(struct hisi_acc_vf_migration_file *src_migf,
> + struct hisi_acc_vf_migration_file *dst_migf)
> +{
> + if (!dst_migf)
> + return;
> +
> + dst_migf->disabled = false;
> + dst_migf->total_length = src_migf->total_length;
> + memcpy(&dst_migf->vf_data, &src_migf->vf_data,
> + sizeof(struct acc_vf_data));
> +}
> +
> static void hisi_acc_vf_disable_fd(struct hisi_acc_vf_migration_file *migf)
> {
> mutex_lock(&migf->lock);
> @@ -621,12 +637,16 @@ static void hisi_acc_vf_disable_fd(struct hisi_acc_vf_migration_file *migf)
> static void hisi_acc_vf_disable_fds(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> {
> if (hisi_acc_vdev->resuming_migf) {
> + hisi_acc_vf_migf_save(hisi_acc_vdev->resuming_migf,
> + hisi_acc_vdev->debug_migf);
> hisi_acc_vf_disable_fd(hisi_acc_vdev->resuming_migf);
> fput(hisi_acc_vdev->resuming_migf->filp);
> hisi_acc_vdev->resuming_migf = NULL;
> }
>
> if (hisi_acc_vdev->saving_migf) {
> + hisi_acc_vf_migf_save(hisi_acc_vdev->saving_migf,
> + hisi_acc_vdev->debug_migf);
> hisi_acc_vf_disable_fd(hisi_acc_vdev->saving_migf);
> fput(hisi_acc_vdev->saving_migf->filp);
> hisi_acc_vdev->saving_migf = NULL;
> @@ -1176,6 +1196,269 @@ static long hisi_acc_vfio_pci_ioctl(struct vfio_device *core_vdev, unsigned int
> return vfio_pci_core_ioctl(core_vdev, cmd, arg);
> }
>
> +static int hisi_acc_vf_debug_create(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> +{
> + struct hisi_acc_vf_migration_file *migf;
> +
> + migf = kzalloc(sizeof(*migf), GFP_KERNEL);
> + if (!migf)
> + return -ENOMEM;
> +
> + migf->disabled = false;
> + hisi_acc_vdev->debug_migf = migf;
> + mutex_init(&migf->lock);
> +
> + return 0;
> +}
> +
> +static void hisi_acc_vf_debug_release(struct hisi_acc_vf_migration_file *migf)
> +{
> + migf->disabled = true;
> + migf->total_length = 0;
> + mutex_destroy(&migf->lock);
> + kfree(migf);
> +}
> +
> +static int hisi_acc_vf_debug_test(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> +{
> + struct device *dev = &hisi_acc_vdev->vf_dev->dev;
> + struct hisi_qm *vf_qm = &hisi_acc_vdev->vf_qm;
> + u64 data;
> + int ret;
> +
> + data = readl(vf_qm->io_base + QM_MB_CMD_SEND_BASE);
> + dev_info(dev, "debug mailbox val: 0x%llx\n", data);
> +
> + ret = qm_wait_dev_not_ready(vf_qm);
> + if (ret)
> + dev_err(dev, "VF device not ready!\n");
> +
> + return ret;
> +}
> +
> +static ssize_t hisi_acc_vf_debug_read(struct file *filp, char __user *buffer,
> + size_t count, loff_t *pos)
> +{
> + char buf[VFIO_DEV_DBG_LEN];
> + int len;
> +
> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
> + "echo 0: test vf state save\n"
> + "echo 1: test vf state resume\n"
> + "echo 2: test vf send mailbox\n"
> + "echo 3: dump vf config data\n"
> + "echo 4: dump vf migration state\n");
%d + enum names should be used here. Does this match best practices
for debugfs? Seems crude to assume 'echo' and 'cat' throughout, but
also reading from the file to learn commands in this way.
> +
> + return simple_read_from_buffer(buffer, count, pos, buf, len);
> +}
> +
> +static void hisi_acc_vf_dev_data_dump(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> +{
> + size_t vf_data_sz = offsetofend(struct acc_vf_data, padding);
> + struct device *dev = &hisi_acc_vdev->vf_dev->dev;
> +
> + if (hisi_acc_vdev->debug_migf &&
> + hisi_acc_vdev->debug_migf->total_length) {
> + print_hex_dump(KERN_INFO, "dev mig data:",
> + DUMP_PREFIX_OFFSET, 16, 1,
> + (u8 *)&hisi_acc_vdev->debug_migf->vf_data,
> + vf_data_sz, false);
> + } else {
> + dev_info(dev, "device not migrated!\n");
> + }
> +}
What are the security implications of an external party being able to
manipulate the device migration state and dump it to the console log?
It seems like a barrier to confidential computing support and we don't
even have this hidden behind a Kconfig option.
> +
> +static void hisi_acc_vf_dev_attr_show(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> +{
> + struct device *dev = &hisi_acc_vdev->vf_dev->dev;
> +
> + if (hisi_acc_vdev->debug_migf &&
> + hisi_acc_vdev->debug_migf->total_length) {
> + dev_info(dev, "acc device:\n"
> + "device state: %d\n"
> + "device ready: %u\n"
> + "data valid: %d\n"
> + "data size: %lu\n",
> + hisi_acc_vdev->mig_state,
> + hisi_acc_vdev->vf_qm_state,
> + hisi_acc_vdev->debug_migf->disabled,
> + hisi_acc_vdev->debug_migf->total_length);
> + } else {
> + dev_info(dev, "device not migrated!\n");
> + }
> +}
> +
> +static int hisi_acc_vf_debug_resume(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> +{
> + struct hisi_acc_vf_migration_file *migf = hisi_acc_vdev->debug_migf;
> + struct device *dev = &hisi_acc_vdev->vf_dev->dev;
> + int ret;
> +
> + ret = vf_qm_state_save(hisi_acc_vdev, migf);
> + if (ret) {
> + dev_err(dev, "failed to save device data!\n");
> + return -EINVAL;
> + }
> +
> + ret = vf_qm_check_match(hisi_acc_vdev, migf);
> + if (ret) {
> + dev_err(dev, "failed to match the VF!\n");
> + return -EINVAL;
> + }
> +
> + ret = vf_qm_load_data(hisi_acc_vdev, migf);
> + if (ret) {
> + dev_err(dev, "failed to recover the VF!\n");
> + return -EINVAL;
> + }
> +
> + vf_qm_fun_reset(&hisi_acc_vdev->vf_qm);
> + dev_info(dev, "successful to resume device data!\n");
> +
> + return 0;
> +}
> +
> +static int hisi_acc_vf_debug_save(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> +{
> + struct hisi_acc_vf_migration_file *migf = hisi_acc_vdev->debug_migf;
> + struct device *dev = &hisi_acc_vdev->vf_dev->dev;
> + int ret;
> +
> + ret = vf_qm_state_save(hisi_acc_vdev, migf);
> + if (ret) {
> + dev_err(dev, "failed to save device data!\n");
> + return -EINVAL;
> + }
> + dev_info(dev, "successful to save device data!\n");
> +
> + return 0;
> +}
> +
> +static ssize_t hisi_acc_vf_debug_write(struct file *filp, const char __user *buffer,
> + size_t count, loff_t *pos)
> +{
> + struct hisi_acc_vf_core_device *hisi_acc_vdev = filp->private_data;
> + char tbuf[VFIO_DEV_DBG_LEN];
> + unsigned long val;
> + int len, ret;
> +
> + if (*pos)
> + return 0;
> +
> + if (count >= VFIO_DEV_DBG_LEN)
> + return -ENOSPC;
> +
> + len = simple_write_to_buffer(tbuf, VFIO_DEV_DBG_LEN - 1,
> + pos, buffer, count);
> + if (len < 0 || len > VFIO_DEV_DBG_LEN - 1)
> + return -EINVAL;
> + tbuf[len] = '\0';
> + if (kstrtoul(tbuf, 0, &val))
> + return -EFAULT;
> +
> + switch (val) {
> + case STATE_SAVE:
> + ret = hisi_acc_vf_debug_save(hisi_acc_vdev);
> + if (ret)
> + return ret;
> + break;
> + case STATE_RESUME:
> + ret = hisi_acc_vf_debug_resume(hisi_acc_vdev);
> + if (ret)
> + return ret;
> + break;
> + case MB_TEST:
> + ret = hisi_acc_vf_debug_test(hisi_acc_vdev);
> + if (ret)
> + return -EINVAL;
> + break;
> + case MIG_DATA_DUMP:
> + hisi_acc_vf_dev_data_dump(hisi_acc_vdev);
> + break;
> + case MIG_DEV_SHOW:
> + hisi_acc_vf_dev_attr_show(hisi_acc_vdev);
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + return count;
> +}
> +
> +static const struct file_operations hisi_acc_vf_debug_fops = {
> + .owner = THIS_MODULE,
> + .open = simple_open,
> + .read = hisi_acc_vf_debug_read,
> + .write = hisi_acc_vf_debug_write,
> +};
> +
> +static ssize_t hisi_acc_vf_state_read(struct file *filp, char __user *buffer,
> + size_t count, loff_t *pos)
> +{
> + struct hisi_acc_vf_core_device *hisi_acc_vdev = filp->private_data;
> + char buf[VFIO_DEV_DBG_LEN];
> + u32 state;
> + int len;
> +
> + state = hisi_acc_vdev->mig_state;
> + switch (state) {
> + case VFIO_DEVICE_STATE_RUNNING:
> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
> + "RUNNING\n");
> + break;
> + case VFIO_DEVICE_STATE_STOP_COPY:
> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
> + "STOP and COPYING\n");
> + break;
> + case VFIO_DEVICE_STATE_STOP:
> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
> + "STOP\n");
> + break;
> + case VFIO_DEVICE_STATE_RESUMING:
> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
> + "RESUMING\n");
> + break;
> + default:
> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
> + "Error\n");
> + }
This looks prone to bit-rot, seems we should specifically test for
ERROR and default should probably print the state value. Also seems
better if the printed value were to match the enum, ie. STOP_COPY
rather than "STOP and COPYING".
> +
> + return simple_read_from_buffer(buffer, count, pos, buf, len);
> +}
> +
> +static const struct file_operations hisi_acc_vf_state_fops = {
> + .owner = THIS_MODULE,
> + .open = simple_open,
> + .read = hisi_acc_vf_state_read,
> +};
> +
> +static void hisi_acc_vf_debugfs_init(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> +{
> + struct pci_dev *vf_pdev = hisi_acc_vdev->vf_dev;
> + struct device *dev = &vf_pdev->dev;
> + int ret;
> +
> + hisi_acc_vdev->debug_root = debugfs_create_dir(dev_name(dev), hisi_acc_debugfs_root);
> + debugfs_create_file("state", 0444, hisi_acc_vdev->debug_root,
> + hisi_acc_vdev, &hisi_acc_vf_state_fops);
> +
> + ret = hisi_acc_vf_debug_create(hisi_acc_vdev);
> + if (ret) {
> + dev_err(dev, "failed to alloc migration debug node\n");
> + return;
> + }
> + debugfs_create_file("debug", 0644, hisi_acc_vdev->debug_root,
> + hisi_acc_vdev, &hisi_acc_vf_debug_fops);
> +}
> +
> +static void hisi_acc_vf_debugfs_exit(struct hisi_acc_vf_core_device *hisi_acc_vdev)
> +{
> + if (hisi_acc_vdev->debug_migf)
> + hisi_acc_vf_debug_release(hisi_acc_vdev->debug_migf);
> +
> + debugfs_remove_recursive(hisi_acc_vdev->debug_root);
> +}
> +
> static int hisi_acc_vfio_pci_open_device(struct vfio_device *core_vdev)
> {
> struct hisi_acc_vf_core_device *hisi_acc_vdev = container_of(core_vdev,
> @@ -1268,7 +1551,7 @@ static int hisi_acc_vfio_pci_probe(struct pci_dev *pdev, const struct pci_device
> struct hisi_acc_vf_core_device *hisi_acc_vdev;
> const struct vfio_device_ops *ops = &hisi_acc_vfio_pci_ops;
> struct hisi_qm *pf_qm;
> - int vf_id;
> + int vf_id = -1;
> int ret;
>
> pf_qm = hisi_acc_get_pf_qm(pdev);
> @@ -1285,6 +1568,9 @@ static int hisi_acc_vfio_pci_probe(struct pci_dev *pdev, const struct pci_device
> if (IS_ERR(hisi_acc_vdev))
> return PTR_ERR(hisi_acc_vdev);
>
> + if (vf_id >= 0)
Perhaps test (ops == &hisi_acc_vfio_pci_migrn_ops) to make this more
obviously tied to migration support.
> + hisi_acc_vf_debugfs_init(hisi_acc_vdev);
> +
> dev_set_drvdata(&pdev->dev, &hisi_acc_vdev->core_device);
> ret = vfio_pci_core_register_device(&hisi_acc_vdev->core_device);
> if (ret)
> @@ -1300,6 +1586,7 @@ static void hisi_acc_vfio_pci_remove(struct pci_dev *pdev)
> {
> struct hisi_acc_vf_core_device *hisi_acc_vdev = hisi_acc_drvdata(pdev);
>
> + hisi_acc_vf_debugfs_exit(hisi_acc_vdev);
> vfio_pci_core_unregister_device(&hisi_acc_vdev->core_device);
> vfio_put_device(&hisi_acc_vdev->core_device.vdev);
> }
> @@ -1327,7 +1614,30 @@ static struct pci_driver hisi_acc_vfio_pci_driver = {
> .driver_managed_dma = true,
> };
>
> -module_pci_driver(hisi_acc_vfio_pci_driver);
> +static int __init hisi_acc_vfio_pci_init(void)
> +{
> + int ret;
> +
> + hisi_acc_debugfs_root = debugfs_create_dir("hisi_vfio_acc", NULL);
> +
> + ret = pci_register_driver(&hisi_acc_vfio_pci_driver);
> + if (ret < 0) {
> + debugfs_remove_recursive(hisi_acc_debugfs_root);
> + pr_err("failed to register pci driver.\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void __exit hisi_acc_vfio_pci_exit(void)
> +{
> + pci_unregister_driver(&hisi_acc_vfio_pci_driver);
> + debugfs_remove_recursive(hisi_acc_debugfs_root);
> +}
> +
> +module_init(hisi_acc_vfio_pci_init);
> +module_exit(hisi_acc_vfio_pci_exit);
>
> MODULE_LICENSE("GPL v2");
> MODULE_AUTHOR("Liu Longfang <liulongfang@huawei.com>");
> diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
> index 67343325b320..ae2a686c2e4d 100644
> --- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
> +++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
> @@ -4,8 +4,11 @@
> #ifndef HISI_ACC_VFIO_PCI_H
> #define HISI_ACC_VFIO_PCI_H
>
> +#include <linux/debugfs.h>
> #include <linux/hisi_acc_qm.h>
>
> +#define VFIO_DEV_DBG_LEN 256
> +
> #define MB_POLL_PERIOD_US 10
> #define MB_POLL_TIMEOUT_US 1000
> #define QM_CACHE_WB_START 0x204
> @@ -49,6 +52,14 @@
> #define QM_EQC_DW0 0X8000
> #define QM_AEQC_DW0 0X8020
>
> +enum mig_debug_cmd {
> + STATE_SAVE,
> + STATE_RESUME,
> + MB_TEST,
> + MIG_DATA_DUMP,
> + MIG_DEV_SHOW,
> +};
> +
> struct acc_vf_data {
> #define QM_MATCH_SIZE offsetofend(struct acc_vf_data, qm_rsv_state)
> /* QM match information */
> @@ -111,5 +122,8 @@ struct hisi_acc_vf_core_device {
> spinlock_t reset_lock;
> struct hisi_acc_vf_migration_file *resuming_migf;
> struct hisi_acc_vf_migration_file *saving_migf;
> + /* For debugfs */
> + struct dentry *debug_root;
> + struct hisi_acc_vf_migration_file *debug_migf;
> };
> #endif /* HISI_ACC_VFIO_PCI_H */
On 2022/11/4 4:21, Alex Williamson wrote:
> [Cc +kvm list]
>
> On Wed, 19 Oct 2022 16:10:32 +0800
> Longfang Liu <liulongfang@huawei.com> wrote:
>
>> There are multiple devices, software and operational steps involved
>> in the process of live migration. An error occurred on any node may
>> cause the live migration operation to fail.
>> This complex process makes it very difficult to locate and analyze
>> the cause when the function fails.
>>
>> In order to quickly locate the cause of the problem when the
>> live migration fails, I added a set of debugfs to the accelerator
>> live migration driver.
>>
>> +-----------------------------------+
>> | |
>> | QEMU |
>> | |
>> +---+--^--------------------+--^----+
>> | | | |
>> | | | |
>> +---v--+----+ +---v--+----+
>> | | | |
>> | src VF | | dest VF |
>> | | | |
>> +---+--^----+ +---+--^----+
>> | | | |
>> | | | |
>> +---v--+----+ +---v--+----+
>> | Debugfs | | Debugfs |
>> +-----+-----+ +-----+-----+
>> |state|debug| |state|debug|
>> +-----+-----+ +-----+-----+
>>
>> This set of debugfs will create two files for each VF device:
>> a state file and a debug file.
>>
>> The migration status of the current VF device can be obtained by
>> reading the status file.
>>
>> The live migration function of the current device can be tested by
>> operating the debug file, and the functional status of the equipment
>> and software at each stage can be tested step by step without
>> performing the complete live migration function. And after the live
>> migration is performed, the migration device data of the live migration
>> can be obtained through the debug file.
>
> This is proposed as an hisi_vfio_acc specific debugfs interface, but
> common code could certainly implement much of this as well. Should we
> have generic support for debugfs?
>
OK, I'd love to extend this part of the debugfs functionality into the
vfio framework and make it a common debugfs functionality for all
device drivers that use live migration.
> Some further comments and concerns below. Thanks,
>
> Alex
>
>
>> Signed-off-by: Longfang Liu <liulongfang@huawei.com>
>> ---
>> .../vfio/pci/hisilicon/hisi_acc_vfio_pci.c | 314 +++++++++++++++++-
>> .../vfio/pci/hisilicon/hisi_acc_vfio_pci.h | 14 +
>> 2 files changed, 326 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
>> index 39eeca18a0f7..eedf8fdf4403 100644
>> --- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
>> +++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c
>> @@ -3,6 +3,7 @@
>> * Copyright (c) 2021, HiSilicon Ltd.
>> */
>>
>> +#include <linux/anon_inodes.h>
>> #include <linux/device.h>
>> #include <linux/eventfd.h>
>> #include <linux/file.h>
>> @@ -16,6 +17,9 @@
>>
>> #include "hisi_acc_vfio_pci.h"
>>
>> +static struct dentry *hisi_acc_debugfs_root;
>> +static atomic_t hisi_acc_root_ref;
>
> This is unused, causing a compile failure:
>
> drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.c:21:17: error: ‘hisi_acc_root_ref’ defined but not used [-Werror=unused-variable]
> 21 | static atomic_t hisi_acc_root_ref;
> | ^~~~~~~~~~~~~~~~~
> cc1: all warnings being treated as errors
>
OK! I will fix this in the next version.
>
>> +
>> /* Return 0 on VM acc device ready, -ETIMEDOUT hardware timeout */
>> static int qm_wait_dev_not_ready(struct hisi_qm *qm)
>> {
>> @@ -609,6 +613,18 @@ hisi_acc_check_int_state(struct hisi_acc_vf_core_device *hisi_acc_vdev)
>> }
>> }
>>
>> +static void hisi_acc_vf_migf_save(struct hisi_acc_vf_migration_file *src_migf,
>> + struct hisi_acc_vf_migration_file *dst_migf)
>> +{
>> + if (!dst_migf)
>> + return;
>> +
>> + dst_migf->disabled = false;
>> + dst_migf->total_length = src_migf->total_length;
>> + memcpy(&dst_migf->vf_data, &src_migf->vf_data,
>> + sizeof(struct acc_vf_data));
>> +}
>> +
>> static void hisi_acc_vf_disable_fd(struct hisi_acc_vf_migration_file *migf)
>> {
>> mutex_lock(&migf->lock);
>> @@ -621,12 +637,16 @@ static void hisi_acc_vf_disable_fd(struct hisi_acc_vf_migration_file *migf)
>> static void hisi_acc_vf_disable_fds(struct hisi_acc_vf_core_device *hisi_acc_vdev)
>> {
>> if (hisi_acc_vdev->resuming_migf) {
>> + hisi_acc_vf_migf_save(hisi_acc_vdev->resuming_migf,
>> + hisi_acc_vdev->debug_migf);
>> hisi_acc_vf_disable_fd(hisi_acc_vdev->resuming_migf);
>> fput(hisi_acc_vdev->resuming_migf->filp);
>> hisi_acc_vdev->resuming_migf = NULL;
>> }
>>
>> if (hisi_acc_vdev->saving_migf) {
>> + hisi_acc_vf_migf_save(hisi_acc_vdev->saving_migf,
>> + hisi_acc_vdev->debug_migf);
>> hisi_acc_vf_disable_fd(hisi_acc_vdev->saving_migf);
>> fput(hisi_acc_vdev->saving_migf->filp);
>> hisi_acc_vdev->saving_migf = NULL;
>> @@ -1176,6 +1196,269 @@ static long hisi_acc_vfio_pci_ioctl(struct vfio_device *core_vdev, unsigned int
>> return vfio_pci_core_ioctl(core_vdev, cmd, arg);
>> }
>>
>> +static int hisi_acc_vf_debug_create(struct hisi_acc_vf_core_device *hisi_acc_vdev)
>> +{
>> + struct hisi_acc_vf_migration_file *migf;
>> +
>> + migf = kzalloc(sizeof(*migf), GFP_KERNEL);
>> + if (!migf)
>> + return -ENOMEM;
>> +
>> + migf->disabled = false;
>> + hisi_acc_vdev->debug_migf = migf;
>> + mutex_init(&migf->lock);
>> +
>> + return 0;
>> +}
>> +
>> +static void hisi_acc_vf_debug_release(struct hisi_acc_vf_migration_file *migf)
>> +{
>> + migf->disabled = true;
>> + migf->total_length = 0;
>> + mutex_destroy(&migf->lock);
>> + kfree(migf);
>> +}
>> +
>> +static int hisi_acc_vf_debug_test(struct hisi_acc_vf_core_device *hisi_acc_vdev)
>> +{
>> + struct device *dev = &hisi_acc_vdev->vf_dev->dev;
>> + struct hisi_qm *vf_qm = &hisi_acc_vdev->vf_qm;
>> + u64 data;
>> + int ret;
>> +
>> + data = readl(vf_qm->io_base + QM_MB_CMD_SEND_BASE);
>> + dev_info(dev, "debug mailbox val: 0x%llx\n", data);
>> +
>> + ret = qm_wait_dev_not_ready(vf_qm);
>> + if (ret)
>> + dev_err(dev, "VF device not ready!\n");
>> +
>> + return ret;
>> +}
>> +
>> +static ssize_t hisi_acc_vf_debug_read(struct file *filp, char __user *buffer,
>> + size_t count, loff_t *pos)
>> +{
>> + char buf[VFIO_DEV_DBG_LEN];
>> + int len;
>> +
>> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
>> + "echo 0: test vf state save\n"
>> + "echo 1: test vf state resume\n"
>> + "echo 2: test vf send mailbox\n"
>> + "echo 3: dump vf config data\n"
>> + "echo 4: dump vf migration state\n");
>
> %d + enum names should be used here. Does this match best practices
Yes, using "%d + enum names" will have better compatibility.
> for debugfs? Seems crude to assume 'echo' and 'cat' throughout, but
> also reading from the file to learn commands in this way.
>
Yes, you can also learn these operation commands by reading from the file,
here is to provide a convenient way to get the command description.
>> +
>> + return simple_read_from_buffer(buffer, count, pos, buf, len);
>> +}
>> +
>> +static void hisi_acc_vf_dev_data_dump(struct hisi_acc_vf_core_device *hisi_acc_vdev)
>> +{
>> + size_t vf_data_sz = offsetofend(struct acc_vf_data, padding);
>> + struct device *dev = &hisi_acc_vdev->vf_dev->dev;
>> +
>> + if (hisi_acc_vdev->debug_migf &&
>> + hisi_acc_vdev->debug_migf->total_length) {
>> + print_hex_dump(KERN_INFO, "dev mig data:",
>> + DUMP_PREFIX_OFFSET, 16, 1,
>> + (u8 *)&hisi_acc_vdev->debug_migf->vf_data,
>> + vf_data_sz, false);
>> + } else {
>> + dev_info(dev, "device not migrated!\n");
>> + }
>> +}
>
> What are the security implications of an external party being able to
> manipulate the device migration state and dump it to the console log?
> It seems like a barrier to confidential computing support and we don't
> even have this hidden behind a Kconfig option.
>
The data output here is only the current device-related status data,
and security-related information such as data addresses will
not be output.
Of course, if we feel that the data of some devices involves
security information, we can choose to remove it when dumping.
>
>> +
>> +static void hisi_acc_vf_dev_attr_show(struct hisi_acc_vf_core_device *hisi_acc_vdev)
>> +{
>> + struct device *dev = &hisi_acc_vdev->vf_dev->dev;
>> +
>> + if (hisi_acc_vdev->debug_migf &&
>> + hisi_acc_vdev->debug_migf->total_length) {
>> + dev_info(dev, "acc device:\n"
>> + "device state: %d\n"
>> + "device ready: %u\n"
>> + "data valid: %d\n"
>> + "data size: %lu\n",
>> + hisi_acc_vdev->mig_state,
>> + hisi_acc_vdev->vf_qm_state,
>> + hisi_acc_vdev->debug_migf->disabled,
>> + hisi_acc_vdev->debug_migf->total_length);
>> + } else {
>> + dev_info(dev, "device not migrated!\n");
>> + }
>> +}
>> +
>> +static int hisi_acc_vf_debug_resume(struct hisi_acc_vf_core_device *hisi_acc_vdev)
>> +{
>> + struct hisi_acc_vf_migration_file *migf = hisi_acc_vdev->debug_migf;
>> + struct device *dev = &hisi_acc_vdev->vf_dev->dev;
>> + int ret;
>> +
>> + ret = vf_qm_state_save(hisi_acc_vdev, migf);
>> + if (ret) {
>> + dev_err(dev, "failed to save device data!\n");
>> + return -EINVAL;
>> + }
>> +
>> + ret = vf_qm_check_match(hisi_acc_vdev, migf);
>> + if (ret) {
>> + dev_err(dev, "failed to match the VF!\n");
>> + return -EINVAL;
>> + }
>> +
>> + ret = vf_qm_load_data(hisi_acc_vdev, migf);
>> + if (ret) {
>> + dev_err(dev, "failed to recover the VF!\n");
>> + return -EINVAL;
>> + }
>> +
>> + vf_qm_fun_reset(&hisi_acc_vdev->vf_qm);
>> + dev_info(dev, "successful to resume device data!\n");
>> +
>> + return 0;
>> +}
>> +
>> +static int hisi_acc_vf_debug_save(struct hisi_acc_vf_core_device *hisi_acc_vdev)
>> +{
>> + struct hisi_acc_vf_migration_file *migf = hisi_acc_vdev->debug_migf;
>> + struct device *dev = &hisi_acc_vdev->vf_dev->dev;
>> + int ret;
>> +
>> + ret = vf_qm_state_save(hisi_acc_vdev, migf);
>> + if (ret) {
>> + dev_err(dev, "failed to save device data!\n");
>> + return -EINVAL;
>> + }
>> + dev_info(dev, "successful to save device data!\n");
>> +
>> + return 0;
>> +}
>> +
>> +static ssize_t hisi_acc_vf_debug_write(struct file *filp, const char __user *buffer,
>> + size_t count, loff_t *pos)
>> +{
>> + struct hisi_acc_vf_core_device *hisi_acc_vdev = filp->private_data;
>> + char tbuf[VFIO_DEV_DBG_LEN];
>> + unsigned long val;
>> + int len, ret;
>> +
>> + if (*pos)
>> + return 0;
>> +
>> + if (count >= VFIO_DEV_DBG_LEN)
>> + return -ENOSPC;
>> +
>> + len = simple_write_to_buffer(tbuf, VFIO_DEV_DBG_LEN - 1,
>> + pos, buffer, count);
>> + if (len < 0 || len > VFIO_DEV_DBG_LEN - 1)
>> + return -EINVAL;
>> + tbuf[len] = '\0';
>> + if (kstrtoul(tbuf, 0, &val))
>> + return -EFAULT;
>> +
>> + switch (val) {
>> + case STATE_SAVE:
>> + ret = hisi_acc_vf_debug_save(hisi_acc_vdev);
>> + if (ret)
>> + return ret;
>> + break;
>> + case STATE_RESUME:
>> + ret = hisi_acc_vf_debug_resume(hisi_acc_vdev);
>> + if (ret)
>> + return ret;
>> + break;
>> + case MB_TEST:
>> + ret = hisi_acc_vf_debug_test(hisi_acc_vdev);
>> + if (ret)
>> + return -EINVAL;
>> + break;
>> + case MIG_DATA_DUMP:
>> + hisi_acc_vf_dev_data_dump(hisi_acc_vdev);
>> + break;
>> + case MIG_DEV_SHOW:
>> + hisi_acc_vf_dev_attr_show(hisi_acc_vdev);
>> + break;
>> + default:
>> + return -EINVAL;
>> + }
>> +
>> + return count;
>> +}
>> +
>> +static const struct file_operations hisi_acc_vf_debug_fops = {
>> + .owner = THIS_MODULE,
>> + .open = simple_open,
>> + .read = hisi_acc_vf_debug_read,
>> + .write = hisi_acc_vf_debug_write,
>> +};
>> +
>> +static ssize_t hisi_acc_vf_state_read(struct file *filp, char __user *buffer,
>> + size_t count, loff_t *pos)
>> +{
>> + struct hisi_acc_vf_core_device *hisi_acc_vdev = filp->private_data;
>> + char buf[VFIO_DEV_DBG_LEN];
>> + u32 state;
>> + int len;
>> +
>> + state = hisi_acc_vdev->mig_state;
>> + switch (state) {
>> + case VFIO_DEVICE_STATE_RUNNING:
>> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
>> + "RUNNING\n");
>> + break;
>> + case VFIO_DEVICE_STATE_STOP_COPY:
>> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
>> + "STOP and COPYING\n");
>> + break;
>> + case VFIO_DEVICE_STATE_STOP:
>> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
>> + "STOP\n");
>> + break;
>> + case VFIO_DEVICE_STATE_RESUMING:
>> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
>> + "RESUMING\n");
>> + break;
>> + default:
>> + len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
>> + "Error\n");
>> + }
>
> This looks prone to bit-rot, seems we should specifically test for
> ERROR and default should probably print the state value.
Well, here we only focus on the status of the currently device used,
other states are handled as error states, and outputting its
state values in the error state can indeed obtain information.
Also seems
> better if the printed value were to match the enum, ie. STOP_COPY
> rather than "STOP and COPYING".
>
OK, this will be modified in the next version.
>> +
>> + return simple_read_from_buffer(buffer, count, pos, buf, len);
>> +}
>> +
>> +static const struct file_operations hisi_acc_vf_state_fops = {
>> + .owner = THIS_MODULE,
>> + .open = simple_open,
>> + .read = hisi_acc_vf_state_read,
>> +};
>> +
>> +static void hisi_acc_vf_debugfs_init(struct hisi_acc_vf_core_device *hisi_acc_vdev)
>> +{
>> + struct pci_dev *vf_pdev = hisi_acc_vdev->vf_dev;
>> + struct device *dev = &vf_pdev->dev;
>> + int ret;
>> +
>> + hisi_acc_vdev->debug_root = debugfs_create_dir(dev_name(dev), hisi_acc_debugfs_root);
>> + debugfs_create_file("state", 0444, hisi_acc_vdev->debug_root,
>> + hisi_acc_vdev, &hisi_acc_vf_state_fops);
>> +
>> + ret = hisi_acc_vf_debug_create(hisi_acc_vdev);
>> + if (ret) {
>> + dev_err(dev, "failed to alloc migration debug node\n");
>> + return;
>> + }
>> + debugfs_create_file("debug", 0644, hisi_acc_vdev->debug_root,
>> + hisi_acc_vdev, &hisi_acc_vf_debug_fops);
>> +}
>> +
>> +static void hisi_acc_vf_debugfs_exit(struct hisi_acc_vf_core_device *hisi_acc_vdev)
>> +{
>> + if (hisi_acc_vdev->debug_migf)
>> + hisi_acc_vf_debug_release(hisi_acc_vdev->debug_migf);
>> +
>> + debugfs_remove_recursive(hisi_acc_vdev->debug_root);
>> +}
>> +
>> static int hisi_acc_vfio_pci_open_device(struct vfio_device *core_vdev)
>> {
>> struct hisi_acc_vf_core_device *hisi_acc_vdev = container_of(core_vdev,
>> @@ -1268,7 +1551,7 @@ static int hisi_acc_vfio_pci_probe(struct pci_dev *pdev, const struct pci_device
>> struct hisi_acc_vf_core_device *hisi_acc_vdev;
>> const struct vfio_device_ops *ops = &hisi_acc_vfio_pci_ops;
>> struct hisi_qm *pf_qm;
>> - int vf_id;
>> + int vf_id = -1;
>> int ret;
>>
>> pf_qm = hisi_acc_get_pf_qm(pdev);
>> @@ -1285,6 +1568,9 @@ static int hisi_acc_vfio_pci_probe(struct pci_dev *pdev, const struct pci_device
>> if (IS_ERR(hisi_acc_vdev))
>> return PTR_ERR(hisi_acc_vdev);
>>
>> + if (vf_id >= 0)
>
> Perhaps test (ops == &hisi_acc_vfio_pci_migrn_ops) to make this more
> obviously tied to migration support.
>
OK, this will be modified in the next version.
>> + hisi_acc_vf_debugfs_init(hisi_acc_vdev);
>> +
>> dev_set_drvdata(&pdev->dev, &hisi_acc_vdev->core_device);
>> ret = vfio_pci_core_register_device(&hisi_acc_vdev->core_device);
>> if (ret)
>> @@ -1300,6 +1586,7 @@ static void hisi_acc_vfio_pci_remove(struct pci_dev *pdev)
>> {
>> struct hisi_acc_vf_core_device *hisi_acc_vdev = hisi_acc_drvdata(pdev);
>>
>> + hisi_acc_vf_debugfs_exit(hisi_acc_vdev);
>> vfio_pci_core_unregister_device(&hisi_acc_vdev->core_device);
>> vfio_put_device(&hisi_acc_vdev->core_device.vdev);
>> }
>> @@ -1327,7 +1614,30 @@ static struct pci_driver hisi_acc_vfio_pci_driver = {
>> .driver_managed_dma = true,
>> };
>>
>> -module_pci_driver(hisi_acc_vfio_pci_driver);
>> +static int __init hisi_acc_vfio_pci_init(void)
>> +{
>> + int ret;
>> +
>> + hisi_acc_debugfs_root = debugfs_create_dir("hisi_vfio_acc", NULL);
>> +
>> + ret = pci_register_driver(&hisi_acc_vfio_pci_driver);
>> + if (ret < 0) {
>> + debugfs_remove_recursive(hisi_acc_debugfs_root);
>> + pr_err("failed to register pci driver.\n");
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void __exit hisi_acc_vfio_pci_exit(void)
>> +{
>> + pci_unregister_driver(&hisi_acc_vfio_pci_driver);
>> + debugfs_remove_recursive(hisi_acc_debugfs_root);
>> +}
>> +
>> +module_init(hisi_acc_vfio_pci_init);
>> +module_exit(hisi_acc_vfio_pci_exit);
>>
>> MODULE_LICENSE("GPL v2");
>> MODULE_AUTHOR("Liu Longfang <liulongfang@huawei.com>");
>> diff --git a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
>> index 67343325b320..ae2a686c2e4d 100644
>> --- a/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
>> +++ b/drivers/vfio/pci/hisilicon/hisi_acc_vfio_pci.h
>> @@ -4,8 +4,11 @@
>> #ifndef HISI_ACC_VFIO_PCI_H
>> #define HISI_ACC_VFIO_PCI_H
>>
>> +#include <linux/debugfs.h>
>> #include <linux/hisi_acc_qm.h>
>>
>> +#define VFIO_DEV_DBG_LEN 256
>> +
>> #define MB_POLL_PERIOD_US 10
>> #define MB_POLL_TIMEOUT_US 1000
>> #define QM_CACHE_WB_START 0x204
>> @@ -49,6 +52,14 @@
>> #define QM_EQC_DW0 0X8000
>> #define QM_AEQC_DW0 0X8020
>>
>> +enum mig_debug_cmd {
>> + STATE_SAVE,
>> + STATE_RESUME,
>> + MB_TEST,
>> + MIG_DATA_DUMP,
>> + MIG_DEV_SHOW,
>> +};
>> +
>> struct acc_vf_data {
>> #define QM_MATCH_SIZE offsetofend(struct acc_vf_data, qm_rsv_state)
>> /* QM match information */
>> @@ -111,5 +122,8 @@ struct hisi_acc_vf_core_device {
>> spinlock_t reset_lock;
>> struct hisi_acc_vf_migration_file *resuming_migf;
>> struct hisi_acc_vf_migration_file *saving_migf;
>> + /* For debugfs */
>> + struct dentry *debug_root;
>> + struct hisi_acc_vf_migration_file *debug_migf;
>> };
>> #endif /* HISI_ACC_VFIO_PCI_H */
>
> .
>
Thanks,
Longfang
On Fri, Nov 04, 2022 at 11:22:51AM +0800, liulongfang wrote:
> On 2022/11/4 4:21, Alex Williamson wrote:
> > [Cc +kvm list]
> >
> > On Wed, 19 Oct 2022 16:10:32 +0800
> > Longfang Liu <liulongfang@huawei.com> wrote:
> >
> >> There are multiple devices, software and operational steps involved
> >> in the process of live migration. An error occurred on any node may
> >> cause the live migration operation to fail.
> >> This complex process makes it very difficult to locate and analyze
> >> the cause when the function fails.
> >>
> >> In order to quickly locate the cause of the problem when the
> >> live migration fails, I added a set of debugfs to the accelerator
> >> live migration driver.
> >>
> >> +-----------------------------------+
> >> | |
> >> | QEMU |
> >> | |
> >> +---+--^--------------------+--^----+
> >> | | | |
> >> | | | |
> >> +---v--+----+ +---v--+----+
> >> | | | |
> >> | src VF | | dest VF |
> >> | | | |
> >> +---+--^----+ +---+--^----+
> >> | | | |
> >> | | | |
> >> +---v--+----+ +---v--+----+
> >> | Debugfs | | Debugfs |
> >> +-----+-----+ +-----+-----+
> >> |state|debug| |state|debug|
> >> +-----+-----+ +-----+-----+
> >>
> >> This set of debugfs will create two files for each VF device:
> >> a state file and a debug file.
> >>
> >> The migration status of the current VF device can be obtained by
> >> reading the status file.
> >>
> >> The live migration function of the current device can be tested by
> >> operating the debug file, and the functional status of the equipment
> >> and software at each stage can be tested step by step without
> >> performing the complete live migration function. And after the live
> >> migration is performed, the migration device data of the live migration
> >> can be obtained through the debug file.
> >
> > This is proposed as an hisi_vfio_acc specific debugfs interface, but
> > common code could certainly implement much of this as well. Should we
> > have generic support for debugfs?
> >
>
> OK, I'd love to extend this part of the debugfs functionality into the
> vfio framework and make it a common debugfs functionality for all
> device drivers that use live migration.
Yeah, it is an interesting idea for sure
Jason
@@ -3,6 +3,7 @@
* Copyright (c) 2021, HiSilicon Ltd.
*/
+#include <linux/anon_inodes.h>
#include <linux/device.h>
#include <linux/eventfd.h>
#include <linux/file.h>
@@ -16,6 +17,9 @@
#include "hisi_acc_vfio_pci.h"
+static struct dentry *hisi_acc_debugfs_root;
+static atomic_t hisi_acc_root_ref;
+
/* Return 0 on VM acc device ready, -ETIMEDOUT hardware timeout */
static int qm_wait_dev_not_ready(struct hisi_qm *qm)
{
@@ -609,6 +613,18 @@ hisi_acc_check_int_state(struct hisi_acc_vf_core_device *hisi_acc_vdev)
}
}
+static void hisi_acc_vf_migf_save(struct hisi_acc_vf_migration_file *src_migf,
+ struct hisi_acc_vf_migration_file *dst_migf)
+{
+ if (!dst_migf)
+ return;
+
+ dst_migf->disabled = false;
+ dst_migf->total_length = src_migf->total_length;
+ memcpy(&dst_migf->vf_data, &src_migf->vf_data,
+ sizeof(struct acc_vf_data));
+}
+
static void hisi_acc_vf_disable_fd(struct hisi_acc_vf_migration_file *migf)
{
mutex_lock(&migf->lock);
@@ -621,12 +637,16 @@ static void hisi_acc_vf_disable_fd(struct hisi_acc_vf_migration_file *migf)
static void hisi_acc_vf_disable_fds(struct hisi_acc_vf_core_device *hisi_acc_vdev)
{
if (hisi_acc_vdev->resuming_migf) {
+ hisi_acc_vf_migf_save(hisi_acc_vdev->resuming_migf,
+ hisi_acc_vdev->debug_migf);
hisi_acc_vf_disable_fd(hisi_acc_vdev->resuming_migf);
fput(hisi_acc_vdev->resuming_migf->filp);
hisi_acc_vdev->resuming_migf = NULL;
}
if (hisi_acc_vdev->saving_migf) {
+ hisi_acc_vf_migf_save(hisi_acc_vdev->saving_migf,
+ hisi_acc_vdev->debug_migf);
hisi_acc_vf_disable_fd(hisi_acc_vdev->saving_migf);
fput(hisi_acc_vdev->saving_migf->filp);
hisi_acc_vdev->saving_migf = NULL;
@@ -1176,6 +1196,269 @@ static long hisi_acc_vfio_pci_ioctl(struct vfio_device *core_vdev, unsigned int
return vfio_pci_core_ioctl(core_vdev, cmd, arg);
}
+static int hisi_acc_vf_debug_create(struct hisi_acc_vf_core_device *hisi_acc_vdev)
+{
+ struct hisi_acc_vf_migration_file *migf;
+
+ migf = kzalloc(sizeof(*migf), GFP_KERNEL);
+ if (!migf)
+ return -ENOMEM;
+
+ migf->disabled = false;
+ hisi_acc_vdev->debug_migf = migf;
+ mutex_init(&migf->lock);
+
+ return 0;
+}
+
+static void hisi_acc_vf_debug_release(struct hisi_acc_vf_migration_file *migf)
+{
+ migf->disabled = true;
+ migf->total_length = 0;
+ mutex_destroy(&migf->lock);
+ kfree(migf);
+}
+
+static int hisi_acc_vf_debug_test(struct hisi_acc_vf_core_device *hisi_acc_vdev)
+{
+ struct device *dev = &hisi_acc_vdev->vf_dev->dev;
+ struct hisi_qm *vf_qm = &hisi_acc_vdev->vf_qm;
+ u64 data;
+ int ret;
+
+ data = readl(vf_qm->io_base + QM_MB_CMD_SEND_BASE);
+ dev_info(dev, "debug mailbox val: 0x%llx\n", data);
+
+ ret = qm_wait_dev_not_ready(vf_qm);
+ if (ret)
+ dev_err(dev, "VF device not ready!\n");
+
+ return ret;
+}
+
+static ssize_t hisi_acc_vf_debug_read(struct file *filp, char __user *buffer,
+ size_t count, loff_t *pos)
+{
+ char buf[VFIO_DEV_DBG_LEN];
+ int len;
+
+ len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
+ "echo 0: test vf state save\n"
+ "echo 1: test vf state resume\n"
+ "echo 2: test vf send mailbox\n"
+ "echo 3: dump vf config data\n"
+ "echo 4: dump vf migration state\n");
+
+ return simple_read_from_buffer(buffer, count, pos, buf, len);
+}
+
+static void hisi_acc_vf_dev_data_dump(struct hisi_acc_vf_core_device *hisi_acc_vdev)
+{
+ size_t vf_data_sz = offsetofend(struct acc_vf_data, padding);
+ struct device *dev = &hisi_acc_vdev->vf_dev->dev;
+
+ if (hisi_acc_vdev->debug_migf &&
+ hisi_acc_vdev->debug_migf->total_length) {
+ print_hex_dump(KERN_INFO, "dev mig data:",
+ DUMP_PREFIX_OFFSET, 16, 1,
+ (u8 *)&hisi_acc_vdev->debug_migf->vf_data,
+ vf_data_sz, false);
+ } else {
+ dev_info(dev, "device not migrated!\n");
+ }
+}
+
+static void hisi_acc_vf_dev_attr_show(struct hisi_acc_vf_core_device *hisi_acc_vdev)
+{
+ struct device *dev = &hisi_acc_vdev->vf_dev->dev;
+
+ if (hisi_acc_vdev->debug_migf &&
+ hisi_acc_vdev->debug_migf->total_length) {
+ dev_info(dev, "acc device:\n"
+ "device state: %d\n"
+ "device ready: %u\n"
+ "data valid: %d\n"
+ "data size: %lu\n",
+ hisi_acc_vdev->mig_state,
+ hisi_acc_vdev->vf_qm_state,
+ hisi_acc_vdev->debug_migf->disabled,
+ hisi_acc_vdev->debug_migf->total_length);
+ } else {
+ dev_info(dev, "device not migrated!\n");
+ }
+}
+
+static int hisi_acc_vf_debug_resume(struct hisi_acc_vf_core_device *hisi_acc_vdev)
+{
+ struct hisi_acc_vf_migration_file *migf = hisi_acc_vdev->debug_migf;
+ struct device *dev = &hisi_acc_vdev->vf_dev->dev;
+ int ret;
+
+ ret = vf_qm_state_save(hisi_acc_vdev, migf);
+ if (ret) {
+ dev_err(dev, "failed to save device data!\n");
+ return -EINVAL;
+ }
+
+ ret = vf_qm_check_match(hisi_acc_vdev, migf);
+ if (ret) {
+ dev_err(dev, "failed to match the VF!\n");
+ return -EINVAL;
+ }
+
+ ret = vf_qm_load_data(hisi_acc_vdev, migf);
+ if (ret) {
+ dev_err(dev, "failed to recover the VF!\n");
+ return -EINVAL;
+ }
+
+ vf_qm_fun_reset(&hisi_acc_vdev->vf_qm);
+ dev_info(dev, "successful to resume device data!\n");
+
+ return 0;
+}
+
+static int hisi_acc_vf_debug_save(struct hisi_acc_vf_core_device *hisi_acc_vdev)
+{
+ struct hisi_acc_vf_migration_file *migf = hisi_acc_vdev->debug_migf;
+ struct device *dev = &hisi_acc_vdev->vf_dev->dev;
+ int ret;
+
+ ret = vf_qm_state_save(hisi_acc_vdev, migf);
+ if (ret) {
+ dev_err(dev, "failed to save device data!\n");
+ return -EINVAL;
+ }
+ dev_info(dev, "successful to save device data!\n");
+
+ return 0;
+}
+
+static ssize_t hisi_acc_vf_debug_write(struct file *filp, const char __user *buffer,
+ size_t count, loff_t *pos)
+{
+ struct hisi_acc_vf_core_device *hisi_acc_vdev = filp->private_data;
+ char tbuf[VFIO_DEV_DBG_LEN];
+ unsigned long val;
+ int len, ret;
+
+ if (*pos)
+ return 0;
+
+ if (count >= VFIO_DEV_DBG_LEN)
+ return -ENOSPC;
+
+ len = simple_write_to_buffer(tbuf, VFIO_DEV_DBG_LEN - 1,
+ pos, buffer, count);
+ if (len < 0 || len > VFIO_DEV_DBG_LEN - 1)
+ return -EINVAL;
+ tbuf[len] = '\0';
+ if (kstrtoul(tbuf, 0, &val))
+ return -EFAULT;
+
+ switch (val) {
+ case STATE_SAVE:
+ ret = hisi_acc_vf_debug_save(hisi_acc_vdev);
+ if (ret)
+ return ret;
+ break;
+ case STATE_RESUME:
+ ret = hisi_acc_vf_debug_resume(hisi_acc_vdev);
+ if (ret)
+ return ret;
+ break;
+ case MB_TEST:
+ ret = hisi_acc_vf_debug_test(hisi_acc_vdev);
+ if (ret)
+ return -EINVAL;
+ break;
+ case MIG_DATA_DUMP:
+ hisi_acc_vf_dev_data_dump(hisi_acc_vdev);
+ break;
+ case MIG_DEV_SHOW:
+ hisi_acc_vf_dev_attr_show(hisi_acc_vdev);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+static const struct file_operations hisi_acc_vf_debug_fops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = hisi_acc_vf_debug_read,
+ .write = hisi_acc_vf_debug_write,
+};
+
+static ssize_t hisi_acc_vf_state_read(struct file *filp, char __user *buffer,
+ size_t count, loff_t *pos)
+{
+ struct hisi_acc_vf_core_device *hisi_acc_vdev = filp->private_data;
+ char buf[VFIO_DEV_DBG_LEN];
+ u32 state;
+ int len;
+
+ state = hisi_acc_vdev->mig_state;
+ switch (state) {
+ case VFIO_DEVICE_STATE_RUNNING:
+ len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
+ "RUNNING\n");
+ break;
+ case VFIO_DEVICE_STATE_STOP_COPY:
+ len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
+ "STOP and COPYING\n");
+ break;
+ case VFIO_DEVICE_STATE_STOP:
+ len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
+ "STOP\n");
+ break;
+ case VFIO_DEVICE_STATE_RESUMING:
+ len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
+ "RESUMING\n");
+ break;
+ default:
+ len = scnprintf(buf, VFIO_DEV_DBG_LEN, "%s\n",
+ "Error\n");
+ }
+
+ return simple_read_from_buffer(buffer, count, pos, buf, len);
+}
+
+static const struct file_operations hisi_acc_vf_state_fops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .read = hisi_acc_vf_state_read,
+};
+
+static void hisi_acc_vf_debugfs_init(struct hisi_acc_vf_core_device *hisi_acc_vdev)
+{
+ struct pci_dev *vf_pdev = hisi_acc_vdev->vf_dev;
+ struct device *dev = &vf_pdev->dev;
+ int ret;
+
+ hisi_acc_vdev->debug_root = debugfs_create_dir(dev_name(dev), hisi_acc_debugfs_root);
+ debugfs_create_file("state", 0444, hisi_acc_vdev->debug_root,
+ hisi_acc_vdev, &hisi_acc_vf_state_fops);
+
+ ret = hisi_acc_vf_debug_create(hisi_acc_vdev);
+ if (ret) {
+ dev_err(dev, "failed to alloc migration debug node\n");
+ return;
+ }
+ debugfs_create_file("debug", 0644, hisi_acc_vdev->debug_root,
+ hisi_acc_vdev, &hisi_acc_vf_debug_fops);
+}
+
+static void hisi_acc_vf_debugfs_exit(struct hisi_acc_vf_core_device *hisi_acc_vdev)
+{
+ if (hisi_acc_vdev->debug_migf)
+ hisi_acc_vf_debug_release(hisi_acc_vdev->debug_migf);
+
+ debugfs_remove_recursive(hisi_acc_vdev->debug_root);
+}
+
static int hisi_acc_vfio_pci_open_device(struct vfio_device *core_vdev)
{
struct hisi_acc_vf_core_device *hisi_acc_vdev = container_of(core_vdev,
@@ -1268,7 +1551,7 @@ static int hisi_acc_vfio_pci_probe(struct pci_dev *pdev, const struct pci_device
struct hisi_acc_vf_core_device *hisi_acc_vdev;
const struct vfio_device_ops *ops = &hisi_acc_vfio_pci_ops;
struct hisi_qm *pf_qm;
- int vf_id;
+ int vf_id = -1;
int ret;
pf_qm = hisi_acc_get_pf_qm(pdev);
@@ -1285,6 +1568,9 @@ static int hisi_acc_vfio_pci_probe(struct pci_dev *pdev, const struct pci_device
if (IS_ERR(hisi_acc_vdev))
return PTR_ERR(hisi_acc_vdev);
+ if (vf_id >= 0)
+ hisi_acc_vf_debugfs_init(hisi_acc_vdev);
+
dev_set_drvdata(&pdev->dev, &hisi_acc_vdev->core_device);
ret = vfio_pci_core_register_device(&hisi_acc_vdev->core_device);
if (ret)
@@ -1300,6 +1586,7 @@ static void hisi_acc_vfio_pci_remove(struct pci_dev *pdev)
{
struct hisi_acc_vf_core_device *hisi_acc_vdev = hisi_acc_drvdata(pdev);
+ hisi_acc_vf_debugfs_exit(hisi_acc_vdev);
vfio_pci_core_unregister_device(&hisi_acc_vdev->core_device);
vfio_put_device(&hisi_acc_vdev->core_device.vdev);
}
@@ -1327,7 +1614,30 @@ static struct pci_driver hisi_acc_vfio_pci_driver = {
.driver_managed_dma = true,
};
-module_pci_driver(hisi_acc_vfio_pci_driver);
+static int __init hisi_acc_vfio_pci_init(void)
+{
+ int ret;
+
+ hisi_acc_debugfs_root = debugfs_create_dir("hisi_vfio_acc", NULL);
+
+ ret = pci_register_driver(&hisi_acc_vfio_pci_driver);
+ if (ret < 0) {
+ debugfs_remove_recursive(hisi_acc_debugfs_root);
+ pr_err("failed to register pci driver.\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static void __exit hisi_acc_vfio_pci_exit(void)
+{
+ pci_unregister_driver(&hisi_acc_vfio_pci_driver);
+ debugfs_remove_recursive(hisi_acc_debugfs_root);
+}
+
+module_init(hisi_acc_vfio_pci_init);
+module_exit(hisi_acc_vfio_pci_exit);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Liu Longfang <liulongfang@huawei.com>");
@@ -4,8 +4,11 @@
#ifndef HISI_ACC_VFIO_PCI_H
#define HISI_ACC_VFIO_PCI_H
+#include <linux/debugfs.h>
#include <linux/hisi_acc_qm.h>
+#define VFIO_DEV_DBG_LEN 256
+
#define MB_POLL_PERIOD_US 10
#define MB_POLL_TIMEOUT_US 1000
#define QM_CACHE_WB_START 0x204
@@ -49,6 +52,14 @@
#define QM_EQC_DW0 0X8000
#define QM_AEQC_DW0 0X8020
+enum mig_debug_cmd {
+ STATE_SAVE,
+ STATE_RESUME,
+ MB_TEST,
+ MIG_DATA_DUMP,
+ MIG_DEV_SHOW,
+};
+
struct acc_vf_data {
#define QM_MATCH_SIZE offsetofend(struct acc_vf_data, qm_rsv_state)
/* QM match information */
@@ -111,5 +122,8 @@ struct hisi_acc_vf_core_device {
spinlock_t reset_lock;
struct hisi_acc_vf_migration_file *resuming_migf;
struct hisi_acc_vf_migration_file *saving_migf;
+ /* For debugfs */
+ struct dentry *debug_root;
+ struct hisi_acc_vf_migration_file *debug_migf;
};
#endif /* HISI_ACC_VFIO_PCI_H */