diff mbox series

[v10,3/4] arm64: dts: qcom: sm6115: Add USB SS qmp phy node

Message ID	20230502053534.1240553-4-bhupesh.sharma@linaro.org
State	New
Headers	Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; From: Bhupesh Sharma <bhupesh.sharma@linaro.org> To: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-phy@lists.infradead.org Cc: agross@kernel.org, linux-kernel@vger.kernel.org, andersson@kernel.org, bhupesh.sharma@linaro.org, bhupesh.linux@gmail.com, krzysztof.kozlowski@linaro.org, robh+dt@kernel.org, konrad.dybcio@linaro.org, kishon@kernel.org, vkoul@kernel.org, krzysztof.kozlowski+dt@linaro.org, dmitry.baryshkov@linaro.org Subject: [PATCH v10 3/4] arm64: dts: qcom: sm6115: Add USB SS qmp phy node Date: Tue, 2 May 2023 11:05:33 +0530 Message-Id: <20230502053534.1240553-4-bhupesh.sharma@linaro.org> In-Reply-To: <20230502053534.1240553-1-bhupesh.sharma@linaro.org> References: <20230502053534.1240553-1-bhupesh.sharma@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	Enable USB SS qmp phy for Qualcomm SM6115 SoC \| [v10,0/4] Enable USB SS qmp phy for Qualcomm SM6115 SoC [v10,1/4] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2… [v10,2/4] phy: qcom-qmp-usb: add support for updated qcm2290 / sm6115 binding [v10,3/4] arm64: dts: qcom: sm6115: Add USB SS qmp phy node [v10,4/4] arm64: dts: qcom: qrb4210-rb2: Enable USB node

Commit Message

Bhupesh Sharma May 2, 2023, 5:35 a.m. UTC

  Add USB superspeed qmp phy node to dtsi.

Make sure that the various board dts files (which include sm4250.dtsi file)
continue to work as intended.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
---
 .../boot/dts/qcom/sm4250-oneplus-billie2.dts  |  3 ++
 arch/arm64/boot/dts/qcom/sm6115.dtsi          | 29 +++++++++++++++++--
 .../boot/dts/qcom/sm6115p-lenovo-j606f.dts    |  3 ++
 3 files changed, 33 insertions(+), 2 deletions(-)

Comments

Konrad Dybcio May 2, 2023, 10:35 a.m. UTC | #1

On 2.05.2023 07:35, Bhupesh Sharma wrote:
> Add USB superspeed qmp phy node to dtsi.
> 
> Make sure that the various board dts files (which include sm4250.dtsi file)
> continue to work as intended.
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>  .../boot/dts/qcom/sm4250-oneplus-billie2.dts  |  3 ++
>  arch/arm64/boot/dts/qcom/sm6115.dtsi          | 29 +++++++++++++++++--
>  .../boot/dts/qcom/sm6115p-lenovo-j606f.dts    |  3 ++
>  3 files changed, 33 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> index a1f0622db5a0..75951fd439df 100644
> --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> @@ -242,6 +242,9 @@ &usb {
>  &usb_dwc3 {
>  	maximum-speed = "high-speed";
>  	dr_mode = "peripheral";
> +
> +	phys = <&usb_hsphy>;
> +	phy-names = "usb2-phy";
>  };
>  
>  &usb_hsphy {
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 631ca327e064..f67863561f3f 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -661,6 +661,31 @@ usb_hsphy: phy@1613000 {
>  			status = "disabled";
>  		};
>  
> +		usb_qmpphy: phy@1615000 {
> +			compatible = "qcom,sm6115-qmp-usb3-phy";
> +			reg = <0x0 0x01615000 0x0 0x1000>;
> +
> +			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
> +				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> +				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +			clock-names = "cfg_ahb",
> +				      "ref",
> +				      "com_aux",
> +				      "pipe";
> +
> +			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
> +				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
> +			reset-names = "phy", "phy_phy";
> +
> +			#clock-cells = <0>;
> +			clock-output-names = "usb3_phy_pipe_clk_src";
> +
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
>  		qfprom@1b40000 {
>  			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
>  			reg = <0x0 0x01b40000 0x0 0x7000>;
> @@ -1111,8 +1136,8 @@ usb_dwc3: usb@4e00000 {
>  				compatible = "snps,dwc3";
>  				reg = <0x0 0x04e00000 0x0 0xcd00>;
>  				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> -				phys = <&usb_hsphy>;
> -				phy-names = "usb2-phy";
> +				phys = <&usb_hsphy>, <&usb_qmpphy>;
> +				phy-names = "usb2-phy", "usb3-phy";
>  				iommus = <&apps_smmu 0x120 0x0>;
>  				snps,dis_u2_susphy_quirk;
>  				snps,dis_enblslpm_quirk;
> diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> index ea3340d31110..81fdcaf48926 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> @@ -306,6 +306,9 @@ &usb {
>  &usb_dwc3 {
>  	maximum-speed = "high-speed";
>  	dr_mode = "peripheral";
> +
> +	phys = <&usb_hsphy>;
> +	phy-names = "usb2-phy";
>  };
>  
>  &usb_hsphy {

Caleb Connolly May 2, 2023, 11:12 a.m. UTC | #2

On 5/2/23 06:35, Bhupesh Sharma wrote:
> Add USB superspeed qmp phy node to dtsi.
> 
> Make sure that the various board dts files (which include sm4250.dtsi file)
> continue to work as intended.
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>

Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
> ---
>   .../boot/dts/qcom/sm4250-oneplus-billie2.dts  |  3 ++
>   arch/arm64/boot/dts/qcom/sm6115.dtsi          | 29 +++++++++++++++++--
>   .../boot/dts/qcom/sm6115p-lenovo-j606f.dts    |  3 ++
>   3 files changed, 33 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> index a1f0622db5a0..75951fd439df 100644
> --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> @@ -242,6 +242,9 @@ &usb {
>   &usb_dwc3 {
>   	maximum-speed = "high-speed";
>   	dr_mode = "peripheral";
> +
> +	phys = <&usb_hsphy>;
> +	phy-names = "usb2-phy";
>   };
>   
>   &usb_hsphy {
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 631ca327e064..f67863561f3f 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -661,6 +661,31 @@ usb_hsphy: phy@1613000 {
>   			status = "disabled";
>   		};
>   
> +		usb_qmpphy: phy@1615000 {
> +			compatible = "qcom,sm6115-qmp-usb3-phy";
> +			reg = <0x0 0x01615000 0x0 0x1000>;
> +
> +			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
> +				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
> +				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
> +				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
> +			clock-names = "cfg_ahb",
> +				      "ref",
> +				      "com_aux",
> +				      "pipe";
> +
> +			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
> +				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
> +			reset-names = "phy", "phy_phy";
> +
> +			#clock-cells = <0>;
> +			clock-output-names = "usb3_phy_pipe_clk_src";
> +
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
> +		};
> +
>   		qfprom@1b40000 {
>   			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
>   			reg = <0x0 0x01b40000 0x0 0x7000>;
> @@ -1111,8 +1136,8 @@ usb_dwc3: usb@4e00000 {
>   				compatible = "snps,dwc3";
>   				reg = <0x0 0x04e00000 0x0 0xcd00>;
>   				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
> -				phys = <&usb_hsphy>;
> -				phy-names = "usb2-phy";
> +				phys = <&usb_hsphy>, <&usb_qmpphy>;
> +				phy-names = "usb2-phy", "usb3-phy";
>   				iommus = <&apps_smmu 0x120 0x0>;
>   				snps,dis_u2_susphy_quirk;
>   				snps,dis_enblslpm_quirk;
> diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> index ea3340d31110..81fdcaf48926 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> +++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
> @@ -306,6 +306,9 @@ &usb {
>   &usb_dwc3 {
>   	maximum-speed = "high-speed";
>   	dr_mode = "peripheral";
> +
> +	phys = <&usb_hsphy>;
> +	phy-names = "usb2-phy";
>   };
>   
>   &usb_hsphy {

diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
index a1f0622db5a0..75951fd439df 100644
--- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
+++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
@@ -242,6 +242,9 @@  &usb {
 &usb_dwc3 {
 	maximum-speed = "high-speed";
 	dr_mode = "peripheral";
+
+	phys = <&usb_hsphy>;
+	phy-names = "usb2-phy";
 };
 
 &usb_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
index 631ca327e064..f67863561f3f 100644
--- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
@@ -661,6 +661,31 @@  usb_hsphy: phy@1613000 {
 			status = "disabled";
 		};
 
+		usb_qmpphy: phy@1615000 {
+			compatible = "qcom,sm6115-qmp-usb3-phy";
+			reg = <0x0 0x01615000 0x0 0x1000>;
+
+			clocks = <&gcc GCC_AHB2PHY_USB_CLK>,
+				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "cfg_ahb",
+				      "ref",
+				      "com_aux",
+				      "pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_SP0_BCR>,
+				 <&gcc GCC_USB3PHY_PHY_PRIM_SP0_BCR>;
+			reset-names = "phy", "phy_phy";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb3_phy_pipe_clk_src";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		qfprom@1b40000 {
 			compatible = "qcom,sm6115-qfprom", "qcom,qfprom";
 			reg = <0x0 0x01b40000 0x0 0x7000>;
@@ -1111,8 +1136,8 @@  usb_dwc3: usb@4e00000 {
 				compatible = "snps,dwc3";
 				reg = <0x0 0x04e00000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb_hsphy>;
-				phy-names = "usb2-phy";
+				phys = <&usb_hsphy>, <&usb_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
 				iommus = <&apps_smmu 0x120 0x0>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
diff --git a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
index ea3340d31110..81fdcaf48926 100644
--- a/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
+++ b/arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts
@@ -306,6 +306,9 @@  &usb {
 &usb_dwc3 {
 	maximum-speed = "high-speed";
 	dr_mode = "peripheral";
+
+	phys = <&usb_hsphy>;
+	phy-names = "usb2-phy";
 };
 
 &usb_hsphy {