diff mbox series

hwmon: (jc42) Consistently use bit and bitfield macros in the driver

Message ID 20221031215140.482457-1-martin.blumenstingl@googlemail.com
State New
Headers
Series hwmon: (jc42) Consistently use bit and bitfield macros in the driver |

Commit Message

Martin Blumenstingl Oct. 31, 2022, 9:51 p.m. UTC 
  Use BIT() and GENMASK() macros for defining the bitfields inside the
registers. Also use FIELD_GET() and FIELD_PREP() where appropriate. This
makes the coding style within the driver consistent. No functional
changes intended.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
This is a small patch with what I consider non-functional improvements.
It makes the driver code consistent with what I am familiar with from
other drivers (not limited to hwmon).
So I'm curious if others also feel that this is an improvement.


 drivers/hwmon/jc42.c | 36 ++++++++++++++++++------------------
 1 file changed, 18 insertions(+), 18 deletions(-)

Comments

Guenter Roeck Nov. 1, 2022, 2:24 p.m. UTC | #1 
On Mon, Oct 31, 2022 at 10:51:40PM +0100, Martin Blumenstingl wrote:
> Use BIT() and GENMASK() macros for defining the bitfields inside the
> registers. Also use FIELD_GET() and FIELD_PREP() where appropriate. This
> makes the coding style within the driver consistent. No functional
> changes intended.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> This is a small patch with what I consider non-functional improvements.
> It makes the driver code consistent with what I am familiar with from
> other drivers (not limited to hwmon).
> So I'm curious if others also feel that this is an improvement.
> 

I like it. I'll queue it up for 6.2.

Guenter

> 
>  drivers/hwmon/jc42.c | 36 ++++++++++++++++++------------------
>  1 file changed, 18 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
> index 6593d81cb901..8523bf974310 100644
> --- a/drivers/hwmon/jc42.c
> +++ b/drivers/hwmon/jc42.c
> @@ -10,6 +10,7 @@
>   */
>  
>  #include <linux/bitops.h>
> +#include <linux/bitfield.h>
>  #include <linux/module.h>
>  #include <linux/init.h>
>  #include <linux/slab.h>


> @@ -37,20 +38,19 @@ static const unsigned short normal_i2c[] = {
>  #define JC42_REG_SMBUS		0x22 /* NXP and Atmel, possibly others? */
>  
>  /* Status bits in temperature register */
> -#define JC42_ALARM_CRIT_BIT	15
> -#define JC42_ALARM_MAX_BIT	14
> -#define JC42_ALARM_MIN_BIT	13
> +#define JC42_ALARM_CRIT		BIT(15)
> +#define JC42_ALARM_MAX		BIT(14)
> +#define JC42_ALARM_MIN		BIT(13)
>  
>  /* Configuration register defines */
> -#define JC42_CFG_CRIT_ONLY	(1 << 2)
> -#define JC42_CFG_TCRIT_LOCK	(1 << 6)
> -#define JC42_CFG_EVENT_LOCK	(1 << 7)
> -#define JC42_CFG_SHUTDOWN	(1 << 8)
> -#define JC42_CFG_HYST_SHIFT	9
> -#define JC42_CFG_HYST_MASK	(0x03 << 9)
> +#define JC42_CFG_CRIT_ONLY	BIT(2)
> +#define JC42_CFG_TCRIT_LOCK	BIT(6)
> +#define JC42_CFG_EVENT_LOCK	BIT(7)
> +#define JC42_CFG_SHUTDOWN	BIT(8)
> +#define JC42_CFG_HYST_MASK	GENMASK(10, 9)
>  
>  /* Capabilities */
> -#define JC42_CAP_RANGE		(1 << 2)
> +#define JC42_CAP_RANGE		BIT(2)
>  
>  /* Manufacturer IDs */
>  #define ADT_MANID		0x11d4  /* Analog Devices */
> @@ -277,8 +277,8 @@ static int jc42_read(struct device *dev, enum hwmon_sensor_types type,
>  			break;
>  
>  		temp = jc42_temp_from_reg(regval);
> -		hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK)
> -						>> JC42_CFG_HYST_SHIFT];
> +		hyst = jc42_hysteresis[FIELD_GET(JC42_CFG_HYST_MASK,
> +						 data->config)];
>  		*val = temp - hyst;
>  		break;
>  	case hwmon_temp_crit_hyst:
> @@ -288,8 +288,8 @@ static int jc42_read(struct device *dev, enum hwmon_sensor_types type,
>  			break;
>  
>  		temp = jc42_temp_from_reg(regval);
> -		hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK)
> -						>> JC42_CFG_HYST_SHIFT];
> +		hyst = jc42_hysteresis[FIELD_GET(JC42_CFG_HYST_MASK,
> +						 data->config)];
>  		*val = temp - hyst;
>  		break;
>  	case hwmon_temp_min_alarm:
> @@ -297,21 +297,21 @@ static int jc42_read(struct device *dev, enum hwmon_sensor_types type,
>  		if (ret)
>  			break;
>  
> -		*val = (regval >> JC42_ALARM_MIN_BIT) & 1;
> +		*val = FIELD_GET(JC42_ALARM_MIN, regval);
>  		break;
>  	case hwmon_temp_max_alarm:
>  		ret = regmap_read(data->regmap, JC42_REG_TEMP, &regval);
>  		if (ret)
>  			break;
>  
> -		*val = (regval >> JC42_ALARM_MAX_BIT) & 1;
> +		*val = FIELD_GET(JC42_ALARM_MAX, regval);
>  		break;
>  	case hwmon_temp_crit_alarm:
>  		ret = regmap_read(data->regmap, JC42_REG_TEMP, &regval);
>  		if (ret)
>  			break;
>  
> -		*val = (regval >> JC42_ALARM_CRIT_BIT) & 1;
> +		*val = FIELD_GET(JC42_ALARM_CRIT, regval);
>  		break;
>  	default:
>  		ret = -EOPNOTSUPP;
> @@ -370,7 +370,7 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
>  				hyst = 3;	/* 6.0 degrees C */
>  		}
>  		data->config = (data->config & ~JC42_CFG_HYST_MASK) |
> -				(hyst << JC42_CFG_HYST_SHIFT);
> +				FIELD_PREP(JC42_CFG_HYST_MASK, hyst);
>  		ret = regmap_write(data->regmap, JC42_REG_CONFIG,
>  				   data->config);
>  		break;
> -- 
> 2.38.1
>
diff mbox series

Patch

diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 6593d81cb901..8523bf974310 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -10,6 +10,7 @@ 
  */
 
 #include <linux/bitops.h>
+#include <linux/bitfield.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -37,20 +38,19 @@  static const unsigned short normal_i2c[] = {
 #define JC42_REG_SMBUS		0x22 /* NXP and Atmel, possibly others? */
 
 /* Status bits in temperature register */
-#define JC42_ALARM_CRIT_BIT	15
-#define JC42_ALARM_MAX_BIT	14
-#define JC42_ALARM_MIN_BIT	13
+#define JC42_ALARM_CRIT		BIT(15)
+#define JC42_ALARM_MAX		BIT(14)
+#define JC42_ALARM_MIN		BIT(13)
 
 /* Configuration register defines */
-#define JC42_CFG_CRIT_ONLY	(1 << 2)
-#define JC42_CFG_TCRIT_LOCK	(1 << 6)
-#define JC42_CFG_EVENT_LOCK	(1 << 7)
-#define JC42_CFG_SHUTDOWN	(1 << 8)
-#define JC42_CFG_HYST_SHIFT	9
-#define JC42_CFG_HYST_MASK	(0x03 << 9)
+#define JC42_CFG_CRIT_ONLY	BIT(2)
+#define JC42_CFG_TCRIT_LOCK	BIT(6)
+#define JC42_CFG_EVENT_LOCK	BIT(7)
+#define JC42_CFG_SHUTDOWN	BIT(8)
+#define JC42_CFG_HYST_MASK	GENMASK(10, 9)
 
 /* Capabilities */
-#define JC42_CAP_RANGE		(1 << 2)
+#define JC42_CAP_RANGE		BIT(2)
 
 /* Manufacturer IDs */
 #define ADT_MANID		0x11d4  /* Analog Devices */
@@ -277,8 +277,8 @@  static int jc42_read(struct device *dev, enum hwmon_sensor_types type,
 			break;
 
 		temp = jc42_temp_from_reg(regval);
-		hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK)
-						>> JC42_CFG_HYST_SHIFT];
+		hyst = jc42_hysteresis[FIELD_GET(JC42_CFG_HYST_MASK,
+						 data->config)];
 		*val = temp - hyst;
 		break;
 	case hwmon_temp_crit_hyst:
@@ -288,8 +288,8 @@  static int jc42_read(struct device *dev, enum hwmon_sensor_types type,
 			break;
 
 		temp = jc42_temp_from_reg(regval);
-		hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK)
-						>> JC42_CFG_HYST_SHIFT];
+		hyst = jc42_hysteresis[FIELD_GET(JC42_CFG_HYST_MASK,
+						 data->config)];
 		*val = temp - hyst;
 		break;
 	case hwmon_temp_min_alarm:
@@ -297,21 +297,21 @@  static int jc42_read(struct device *dev, enum hwmon_sensor_types type,
 		if (ret)
 			break;
 
-		*val = (regval >> JC42_ALARM_MIN_BIT) & 1;
+		*val = FIELD_GET(JC42_ALARM_MIN, regval);
 		break;
 	case hwmon_temp_max_alarm:
 		ret = regmap_read(data->regmap, JC42_REG_TEMP, &regval);
 		if (ret)
 			break;
 
-		*val = (regval >> JC42_ALARM_MAX_BIT) & 1;
+		*val = FIELD_GET(JC42_ALARM_MAX, regval);
 		break;
 	case hwmon_temp_crit_alarm:
 		ret = regmap_read(data->regmap, JC42_REG_TEMP, &regval);
 		if (ret)
 			break;
 
-		*val = (regval >> JC42_ALARM_CRIT_BIT) & 1;
+		*val = FIELD_GET(JC42_ALARM_CRIT, regval);
 		break;
 	default:
 		ret = -EOPNOTSUPP;
@@ -370,7 +370,7 @@  static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
 				hyst = 3;	/* 6.0 degrees C */
 		}
 		data->config = (data->config & ~JC42_CFG_HYST_MASK) |
-				(hyst << JC42_CFG_HYST_SHIFT);
+				FIELD_PREP(JC42_CFG_HYST_MASK, hyst);
 		ret = regmap_write(data->regmap, JC42_REG_CONFIG,
 				   data->config);
 		break;