diff mbox series

[2/4] Input: pwm-vibra - add newline to dev_err prints

Message ID 20230427-hammerhead-vibra-v1-2-e87eeb94da51@z3ntu.xyz
State New
Headers
Series Add haptics support to Nexus 5 using pwm-vibra driver |

Commit Message

Luca Weiss April 27, 2023, 8:34 p.m. UTC 
  Make sure all printed messages end with a newline.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 drivers/input/misc/pwm-vibra.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

Comments

Brian Masney April 27, 2023, 11:30 p.m. UTC | #1 
On Thu, Apr 27, 2023 at 10:34:27PM +0200, Luca Weiss wrote:
> Make sure all printed messages end with a newline.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>

Reviewed-by: Brian Masney <bmasney@redhat.com>
Caleb Connolly April 28, 2023, 10:10 a.m. UTC | #2 
On 27/04/2023 21:34, Luca Weiss wrote:
> Make sure all printed messages end with a newline.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>

Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
> ---
>   drivers/input/misc/pwm-vibra.c | 20 ++++++++++----------
>   1 file changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c
> index d0e58a7cdfa3..c08971c97ad6 100644
> --- a/drivers/input/misc/pwm-vibra.c
> +++ b/drivers/input/misc/pwm-vibra.c
> @@ -42,7 +42,7 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
>   	if (!vibrator->vcc_on) {
>   		err = regulator_enable(vibrator->vcc);
>   		if (err) {
> -			dev_err(pdev, "failed to enable regulator: %d", err);
> +			dev_err(pdev, "failed to enable regulator: %d\n", err);
>   			return err;
>   		}
>   		vibrator->vcc_on = true;
> @@ -54,7 +54,7 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
>   
>   	err = pwm_apply_state(vibrator->pwm, &state);
>   	if (err) {
> -		dev_err(pdev, "failed to apply pwm state: %d", err);
> +		dev_err(pdev, "failed to apply pwm state: %d\n", err);
>   		return err;
>   	}
>   
> @@ -65,7 +65,7 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
>   
>   		err = pwm_apply_state(vibrator->pwm_dir, &state);
>   		if (err) {
> -			dev_err(pdev, "failed to apply dir-pwm state: %d", err);
> +			dev_err(pdev, "failed to apply dir-pwm state: %d\n", err);
>   			pwm_disable(vibrator->pwm);
>   			return err;
>   		}
> @@ -137,7 +137,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
>   	err = PTR_ERR_OR_ZERO(vibrator->vcc);
>   	if (err) {
>   		if (err != -EPROBE_DEFER)
> -			dev_err(&pdev->dev, "Failed to request regulator: %d",
> +			dev_err(&pdev->dev, "Failed to request regulator: %d\n",
>   				err);
>   		return err;
>   	}
> @@ -146,7 +146,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
>   	err = PTR_ERR_OR_ZERO(vibrator->pwm);
>   	if (err) {
>   		if (err != -EPROBE_DEFER)
> -			dev_err(&pdev->dev, "Failed to request main pwm: %d",
> +			dev_err(&pdev->dev, "Failed to request main pwm: %d\n",
>   				err);
>   		return err;
>   	}
> @@ -158,7 +158,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
>   	state.enabled = false;
>   	err = pwm_apply_state(vibrator->pwm, &state);
>   	if (err) {
> -		dev_err(&pdev->dev, "failed to apply initial PWM state: %d",
> +		dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n",
>   			err);
>   		return err;
>   	}
> @@ -172,7 +172,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
>   		state.enabled = false;
>   		err = pwm_apply_state(vibrator->pwm_dir, &state);
>   		if (err) {
> -			dev_err(&pdev->dev, "failed to apply initial PWM state: %d",
> +			dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n",
>   				err);
>   			return err;
>   		}
> @@ -189,7 +189,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
>   		break;
>   
>   	default:
> -		dev_err(&pdev->dev, "Failed to request direction pwm: %d", err);
> +		dev_err(&pdev->dev, "Failed to request direction pwm: %d\n", err);
>   		fallthrough;
>   
>   	case -EPROBE_DEFER:
> @@ -207,13 +207,13 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
>   	err = input_ff_create_memless(vibrator->input, NULL,
>   				      pwm_vibrator_play_effect);
>   	if (err) {
> -		dev_err(&pdev->dev, "Couldn't create FF dev: %d", err);
> +		dev_err(&pdev->dev, "Couldn't create FF dev: %d\n", err);
>   		return err;
>   	}
>   
>   	err = input_register_device(vibrator->input);
>   	if (err) {
> -		dev_err(&pdev->dev, "Couldn't register input dev: %d", err);
> +		dev_err(&pdev->dev, "Couldn't register input dev: %d\n", err);
>   		return err;
>   	}
>   
>
Sebastian Reichel April 29, 2023, 7:45 p.m. UTC | #3 
Hi,

On Thu, Apr 27, 2023 at 10:34:27PM +0200, Luca Weiss wrote:
> Make sure all printed messages end with a newline.
> 
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---

Reviewed-by: Sebastian Reichel <sre@kernel.org>

-- Sebastian

>  drivers/input/misc/pwm-vibra.c | 20 ++++++++++----------
>  1 file changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c
> index d0e58a7cdfa3..c08971c97ad6 100644
> --- a/drivers/input/misc/pwm-vibra.c
> +++ b/drivers/input/misc/pwm-vibra.c
> @@ -42,7 +42,7 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
>  	if (!vibrator->vcc_on) {
>  		err = regulator_enable(vibrator->vcc);
>  		if (err) {
> -			dev_err(pdev, "failed to enable regulator: %d", err);
> +			dev_err(pdev, "failed to enable regulator: %d\n", err);
>  			return err;
>  		}
>  		vibrator->vcc_on = true;
> @@ -54,7 +54,7 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
>  
>  	err = pwm_apply_state(vibrator->pwm, &state);
>  	if (err) {
> -		dev_err(pdev, "failed to apply pwm state: %d", err);
> +		dev_err(pdev, "failed to apply pwm state: %d\n", err);
>  		return err;
>  	}
>  
> @@ -65,7 +65,7 @@ static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
>  
>  		err = pwm_apply_state(vibrator->pwm_dir, &state);
>  		if (err) {
> -			dev_err(pdev, "failed to apply dir-pwm state: %d", err);
> +			dev_err(pdev, "failed to apply dir-pwm state: %d\n", err);
>  			pwm_disable(vibrator->pwm);
>  			return err;
>  		}
> @@ -137,7 +137,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
>  	err = PTR_ERR_OR_ZERO(vibrator->vcc);
>  	if (err) {
>  		if (err != -EPROBE_DEFER)
> -			dev_err(&pdev->dev, "Failed to request regulator: %d",
> +			dev_err(&pdev->dev, "Failed to request regulator: %d\n",
>  				err);
>  		return err;
>  	}
> @@ -146,7 +146,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
>  	err = PTR_ERR_OR_ZERO(vibrator->pwm);
>  	if (err) {
>  		if (err != -EPROBE_DEFER)
> -			dev_err(&pdev->dev, "Failed to request main pwm: %d",
> +			dev_err(&pdev->dev, "Failed to request main pwm: %d\n",
>  				err);
>  		return err;
>  	}
> @@ -158,7 +158,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
>  	state.enabled = false;
>  	err = pwm_apply_state(vibrator->pwm, &state);
>  	if (err) {
> -		dev_err(&pdev->dev, "failed to apply initial PWM state: %d",
> +		dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n",
>  			err);
>  		return err;
>  	}
> @@ -172,7 +172,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
>  		state.enabled = false;
>  		err = pwm_apply_state(vibrator->pwm_dir, &state);
>  		if (err) {
> -			dev_err(&pdev->dev, "failed to apply initial PWM state: %d",
> +			dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n",
>  				err);
>  			return err;
>  		}
> @@ -189,7 +189,7 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
>  		break;
>  
>  	default:
> -		dev_err(&pdev->dev, "Failed to request direction pwm: %d", err);
> +		dev_err(&pdev->dev, "Failed to request direction pwm: %d\n", err);
>  		fallthrough;
>  
>  	case -EPROBE_DEFER:
> @@ -207,13 +207,13 @@ static int pwm_vibrator_probe(struct platform_device *pdev)
>  	err = input_ff_create_memless(vibrator->input, NULL,
>  				      pwm_vibrator_play_effect);
>  	if (err) {
> -		dev_err(&pdev->dev, "Couldn't create FF dev: %d", err);
> +		dev_err(&pdev->dev, "Couldn't create FF dev: %d\n", err);
>  		return err;
>  	}
>  
>  	err = input_register_device(vibrator->input);
>  	if (err) {
> -		dev_err(&pdev->dev, "Couldn't register input dev: %d", err);
> +		dev_err(&pdev->dev, "Couldn't register input dev: %d\n", err);
>  		return err;
>  	}
>  
> 
> -- 
> 2.40.0
>
diff mbox series

Patch

diff --git a/drivers/input/misc/pwm-vibra.c b/drivers/input/misc/pwm-vibra.c
index d0e58a7cdfa3..c08971c97ad6 100644
--- a/drivers/input/misc/pwm-vibra.c
+++ b/drivers/input/misc/pwm-vibra.c
@@ -42,7 +42,7 @@  static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
 	if (!vibrator->vcc_on) {
 		err = regulator_enable(vibrator->vcc);
 		if (err) {
-			dev_err(pdev, "failed to enable regulator: %d", err);
+			dev_err(pdev, "failed to enable regulator: %d\n", err);
 			return err;
 		}
 		vibrator->vcc_on = true;
@@ -54,7 +54,7 @@  static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
 
 	err = pwm_apply_state(vibrator->pwm, &state);
 	if (err) {
-		dev_err(pdev, "failed to apply pwm state: %d", err);
+		dev_err(pdev, "failed to apply pwm state: %d\n", err);
 		return err;
 	}
 
@@ -65,7 +65,7 @@  static int pwm_vibrator_start(struct pwm_vibrator *vibrator)
 
 		err = pwm_apply_state(vibrator->pwm_dir, &state);
 		if (err) {
-			dev_err(pdev, "failed to apply dir-pwm state: %d", err);
+			dev_err(pdev, "failed to apply dir-pwm state: %d\n", err);
 			pwm_disable(vibrator->pwm);
 			return err;
 		}
@@ -137,7 +137,7 @@  static int pwm_vibrator_probe(struct platform_device *pdev)
 	err = PTR_ERR_OR_ZERO(vibrator->vcc);
 	if (err) {
 		if (err != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Failed to request regulator: %d",
+			dev_err(&pdev->dev, "Failed to request regulator: %d\n",
 				err);
 		return err;
 	}
@@ -146,7 +146,7 @@  static int pwm_vibrator_probe(struct platform_device *pdev)
 	err = PTR_ERR_OR_ZERO(vibrator->pwm);
 	if (err) {
 		if (err != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Failed to request main pwm: %d",
+			dev_err(&pdev->dev, "Failed to request main pwm: %d\n",
 				err);
 		return err;
 	}
@@ -158,7 +158,7 @@  static int pwm_vibrator_probe(struct platform_device *pdev)
 	state.enabled = false;
 	err = pwm_apply_state(vibrator->pwm, &state);
 	if (err) {
-		dev_err(&pdev->dev, "failed to apply initial PWM state: %d",
+		dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n",
 			err);
 		return err;
 	}
@@ -172,7 +172,7 @@  static int pwm_vibrator_probe(struct platform_device *pdev)
 		state.enabled = false;
 		err = pwm_apply_state(vibrator->pwm_dir, &state);
 		if (err) {
-			dev_err(&pdev->dev, "failed to apply initial PWM state: %d",
+			dev_err(&pdev->dev, "failed to apply initial PWM state: %d\n",
 				err);
 			return err;
 		}
@@ -189,7 +189,7 @@  static int pwm_vibrator_probe(struct platform_device *pdev)
 		break;
 
 	default:
-		dev_err(&pdev->dev, "Failed to request direction pwm: %d", err);
+		dev_err(&pdev->dev, "Failed to request direction pwm: %d\n", err);
 		fallthrough;
 
 	case -EPROBE_DEFER:
@@ -207,13 +207,13 @@  static int pwm_vibrator_probe(struct platform_device *pdev)
 	err = input_ff_create_memless(vibrator->input, NULL,
 				      pwm_vibrator_play_effect);
 	if (err) {
-		dev_err(&pdev->dev, "Couldn't create FF dev: %d", err);
+		dev_err(&pdev->dev, "Couldn't create FF dev: %d\n", err);
 		return err;
 	}
 
 	err = input_register_device(vibrator->input);
 	if (err) {
-		dev_err(&pdev->dev, "Couldn't register input dev: %d", err);
+		dev_err(&pdev->dev, "Couldn't register input dev: %d\n", err);
 		return err;
 	}