diff mbox series

[net,v2,2/3] r8152: fix the poor throughput for 2.5G devices

Message ID 20230427121057.29155-407-nic_swsd@realtek.com
State New
Headers
Series r8152: fix 2.5G devices |

Commit Message

Hayes Wang April 27, 2023, 12:10 p.m. UTC 
  Fix the poor throughput for 2.5G devices, when changing the speed from
auto mode to force mode. This patch is used to notify the MAC when the
mode is changed.

Fixes: 195aae321c82 ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Andrew Lunn April 27, 2023, 12:25 p.m. UTC | #1 
> @@ -7554,6 +7558,11 @@ static void r8156_hw_phy_cfg(struct r8152 *tp)
>  				      ((swap_a & 0x1f) << 8) |
>  				      ((swap_a >> 8) & 0x1f));
>  		}
> +
> +		/*  set intr_en[3] */
> +		data = ocp_reg_read(tp, OCP_INTR_EN);
> +		data |= INTR_SPEED_FORCE;

Which is more meaningful, set intr_en[3], or data |= INTR_SPEED_FORCE
I would say the second. The code is now pretty readable, it says
what it is doing. So if you want to add a comment, you really should
be commenting on why, not what.

   Andrew
diff mbox series

Patch

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index afd50e90d1fe..0846ceb72162 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -199,6 +199,7 @@ 
 #define OCP_EEE_AR		0xa41a
 #define OCP_EEE_DATA		0xa41c
 #define OCP_PHY_STATUS		0xa420
+#define OCP_INTR_EN		0xa424
 #define OCP_NCTL_CFG		0xa42c
 #define OCP_POWER_CFG		0xa430
 #define OCP_EEE_CFG		0xa432
@@ -620,6 +621,9 @@  enum spd_duplex {
 #define PHY_STAT_LAN_ON		3
 #define PHY_STAT_PWRDN		5
 
+/* OCP_INTR_EN */
+#define INTR_SPEED_FORCE	BIT(3)
+
 /* OCP_NCTL_CFG */
 #define PGA_RETURN_EN		BIT(1)
 
@@ -7554,6 +7558,11 @@  static void r8156_hw_phy_cfg(struct r8152 *tp)
 				      ((swap_a & 0x1f) << 8) |
 				      ((swap_a >> 8) & 0x1f));
 		}
+
+		/*  set intr_en[3] */
+		data = ocp_reg_read(tp, OCP_INTR_EN);
+		data |= INTR_SPEED_FORCE;
+		ocp_reg_write(tp, OCP_INTR_EN, data);
 		break;
 	default:
 		break;
@@ -7949,6 +7958,11 @@  static void r8156b_hw_phy_cfg(struct r8152 *tp)
 		break;
 	}
 
+	/*  set intr_en[3] */
+	data = ocp_reg_read(tp, OCP_INTR_EN);
+	data |= INTR_SPEED_FORCE;
+	ocp_reg_write(tp, OCP_INTR_EN, data);
+
 	if (rtl_phy_patch_request(tp, true, true))
 		return;