@@ -2,6 +2,8 @@
// Copyright (c) 2017-2018, The Linux foundation. All rights reserved.
#include <linux/clk.h>
+#include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
#include <linux/interconnect.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -62,6 +64,7 @@
#define WR_FIFO_FULL BIT(10)
#define WR_FIFO_OVERRUN BIT(11)
#define TRANSACTION_DONE BIT(16)
+#define DMA_CHAIN_DONE BIT(31)
#define QSPI_ERR_IRQS (RESP_FIFO_UNDERRUN | HRESP_FROM_NOC_ERR | \
WR_FIFO_OVERRUN)
#define QSPI_ALL_IRQS (QSPI_ERR_IRQS | RESP_FIFO_RDY | \
@@ -108,18 +111,34 @@
#define RD_FIFO_RESET 0x0030
#define RESET_FIFO BIT(0)
+#define NEXT_DMA_DESC_ADDR 0x0040
+#define CURRENT_DMA_DESC_ADDR 0x0044
+#define CURRENT_MEM_ADDR 0x0048
+
#define CUR_MEM_ADDR 0x0048
#define HW_VERSION 0x004c
#define RD_FIFO 0x0050
#define SAMPLING_CLK_CFG 0x0090
#define SAMPLING_CLK_STATUS 0x0094
+#define QSPI_ALIGN_REQ 32
enum qspi_dir {
QSPI_READ,
QSPI_WRITE,
};
+struct qspi_cmd_desc {
+ u32 data_address;
+ u32 next_descriptor;
+ u32 direction:1;
+ u32 multi_io_mode:3;
+ u32 reserved1:4;
+ u32 fragment:1;
+ u32 reserved2:7;
+ u32 length:16;
+};
+
struct qspi_xfer {
union {
const void *tx_buf;
@@ -137,11 +156,23 @@ enum qspi_clocks {
QSPI_NUM_CLKS
};
+/*
+ * Number of entries in sgt returned from spi framework that-
+ * will be supported. Can be modified as required.
+ * In practice, given max_dma_len is 64KB, the number of
+ * entries is not expected to exceed 1.
+ */
+#define QSPI_MAX_SG 5
+
struct qcom_qspi {
void __iomem *base;
struct device *dev;
struct clk_bulk_data *clks;
struct qspi_xfer xfer;
+ struct dma_pool *dma_cmd_pool;
+ dma_addr_t dma_cmd_desc[QSPI_MAX_SG];
+ void *virt_cmd_desc[QSPI_MAX_SG];
+ unsigned int n_cmd_desc;
struct icc_path *icc_path_cpu_to_qspi;
unsigned long last_speed;
/* Lock to protect data accessed by IRQs */
@@ -153,21 +184,22 @@ static u32 qspi_buswidth_to_iomode(struct qcom_qspi *ctrl,
{
switch (buswidth) {
case 1:
- return SDR_1BIT << MULTI_IO_MODE_SHFT;
+ return SDR_1BIT;
case 2:
- return SDR_2BIT << MULTI_IO_MODE_SHFT;
+ return SDR_2BIT;
case 4:
- return SDR_4BIT << MULTI_IO_MODE_SHFT;
+ return SDR_4BIT;
default:
dev_warn_once(ctrl->dev,
"Unexpected bus width: %u\n", buswidth);
- return SDR_1BIT << MULTI_IO_MODE_SHFT;
+ return SDR_1BIT;
}
}
static void qcom_qspi_pio_xfer_cfg(struct qcom_qspi *ctrl)
{
u32 pio_xfer_cfg;
+ u32 iomode;
const struct qspi_xfer *xfer;
xfer = &ctrl->xfer;
@@ -179,7 +211,8 @@ static void qcom_qspi_pio_xfer_cfg(struct qcom_qspi *ctrl)
else
pio_xfer_cfg |= TRANSFER_FRAGMENT;
pio_xfer_cfg &= ~MULTI_IO_MODE_MSK;
- pio_xfer_cfg |= qspi_buswidth_to_iomode(ctrl, xfer->buswidth);
+ iomode = qspi_buswidth_to_iomode(ctrl, xfer->buswidth);
+ pio_xfer_cfg |= iomode << MULTI_IO_MODE_SHFT;
writel(pio_xfer_cfg, ctrl->base + PIO_XFER_CFG);
}
@@ -217,12 +250,22 @@ static void qcom_qspi_pio_xfer(struct qcom_qspi *ctrl)
static void qcom_qspi_handle_err(struct spi_master *master,
struct spi_message *msg)
{
+ u32 int_status;
struct qcom_qspi *ctrl = spi_master_get_devdata(master);
unsigned long flags;
+ int i;
spin_lock_irqsave(&ctrl->lock, flags);
writel(0, ctrl->base + MSTR_INT_EN);
+ int_status = readl(ctrl->base + MSTR_INT_STATUS);
+ writel(int_status, ctrl->base + MSTR_INT_STATUS);
ctrl->xfer.rem_bytes = 0;
+
+ /* free cmd descriptors if they are around (DMA mode) */
+ for (i = 0; i < ctrl->n_cmd_desc; i++)
+ dma_pool_free(ctrl->dma_cmd_pool, ctrl->virt_cmd_desc[i],
+ ctrl->dma_cmd_desc[i]);
+ ctrl->n_cmd_desc = 0;
spin_unlock_irqrestore(&ctrl->lock, flags);
}
@@ -242,7 +285,7 @@ static int qcom_qspi_set_speed(struct qcom_qspi *ctrl, unsigned long speed_hz)
}
/*
- * Set BW quota for CPU as driver supports FIFO mode only.
+ * Set BW quota for CPU.
* We don't have explicit peak requirement so keep it equal to avg_bw.
*/
avg_bw_cpu = Bps_to_icc(speed_hz);
@@ -258,6 +301,102 @@ static int qcom_qspi_set_speed(struct qcom_qspi *ctrl, unsigned long speed_hz)
return 0;
}
+static int qcom_qspi_alloc_desc(struct qcom_qspi *ctrl, dma_addr_t dma_ptr,
+ uint32_t n_bytes)
+{
+ struct qspi_cmd_desc *virt_cmd_desc, *prev;
+ dma_addr_t dma_cmd_desc;
+
+ /* allocate for dma cmd descriptor */
+ virt_cmd_desc = dma_pool_alloc(ctrl->dma_cmd_pool, GFP_KERNEL | __GFP_ZERO, &dma_cmd_desc);
+ if (!virt_cmd_desc)
+ return -ENOMEM;
+
+ ctrl->virt_cmd_desc[ctrl->n_cmd_desc] = virt_cmd_desc;
+ ctrl->dma_cmd_desc[ctrl->n_cmd_desc] = dma_cmd_desc;
+ ctrl->n_cmd_desc++;
+
+ /* setup cmd descriptor */
+ virt_cmd_desc->data_address = dma_ptr;
+ virt_cmd_desc->direction = ctrl->xfer.dir;
+ virt_cmd_desc->multi_io_mode = qspi_buswidth_to_iomode(ctrl, ctrl->xfer.buswidth);
+ virt_cmd_desc->fragment = !ctrl->xfer.is_last;
+ virt_cmd_desc->length = n_bytes;
+
+ /* update previous descriptor */
+ if (ctrl->n_cmd_desc >= 2) {
+ prev = (ctrl->virt_cmd_desc)[ctrl->n_cmd_desc - 2];
+ prev->next_descriptor = dma_cmd_desc;
+ prev->fragment = 1;
+ }
+
+ return 0;
+}
+
+static int qcom_qspi_setup_dma_desc(struct qcom_qspi *ctrl,
+ struct spi_transfer *xfer)
+{
+ int ret;
+ struct sg_table *sgt;
+ dma_addr_t dma_ptr_sg;
+ unsigned int dma_len_sg;
+ int i;
+
+ if (ctrl->n_cmd_desc) {
+ dev_err(ctrl->dev, "Remnant dma buffers n_cmd_desc-%d\n", ctrl->n_cmd_desc);
+ return -EIO;
+ }
+
+ sgt = (ctrl->xfer.dir == QSPI_READ) ? &xfer->rx_sg : &xfer->tx_sg;
+ if (!sgt->nents || sgt->nents > QSPI_MAX_SG) {
+ dev_warn_once(ctrl->dev, "Cannot handle %d entries in scatter list\n", sgt->nents);
+ return -EAGAIN;
+ }
+
+ for (i = 0; i < sgt->nents; i++) {
+ dma_ptr_sg = sg_dma_address(sgt->sgl + i);
+ if (!IS_ALIGNED(dma_ptr_sg, QSPI_ALIGN_REQ)) {
+ dev_warn_once(ctrl->dev, "dma_address not aligned to %d\n", QSPI_ALIGN_REQ);
+ return -EAGAIN;
+ }
+ }
+
+ for (i = 0; i < sgt->nents; i++) {
+ dma_ptr_sg = sg_dma_address(sgt->sgl + i);
+ dma_len_sg = sg_dma_len(sgt->sgl + i);
+
+ ret = qcom_qspi_alloc_desc(ctrl, dma_ptr_sg, dma_len_sg);
+ if (ret)
+ goto cleanup;
+ }
+ return 0;
+
+cleanup:
+ for (i = 0; i < ctrl->n_cmd_desc; i++)
+ dma_pool_free(ctrl->dma_cmd_pool, ctrl->virt_cmd_desc[i],
+ ctrl->dma_cmd_desc[i]);
+ ctrl->n_cmd_desc = 0;
+ return ret;
+}
+
+static void qcom_qspi_dma_xfer(struct qcom_qspi *ctrl)
+{
+ /* Setup new interrupts */
+ writel(DMA_CHAIN_DONE, ctrl->base + MSTR_INT_EN);
+
+ /* kick off transfer */
+ writel((u32)((ctrl->dma_cmd_desc)[0]), ctrl->base + NEXT_DMA_DESC_ADDR);
+}
+
+/* Switch to DMA if transfer length exceeds this */
+#define QSPI_MAX_BYTES_FIFO 64
+
+static bool qcom_qspi_can_dma(struct spi_controller *ctlr,
+ struct spi_device *slv, struct spi_transfer *xfer)
+{
+ return xfer->len > QSPI_MAX_BYTES_FIFO;
+}
+
static int qcom_qspi_transfer_one(struct spi_master *master,
struct spi_device *slv,
struct spi_transfer *xfer)
@@ -266,6 +405,7 @@ static int qcom_qspi_transfer_one(struct spi_master *master,
int ret;
unsigned long speed_hz;
unsigned long flags;
+ u32 mstr_cfg;
speed_hz = slv->max_speed_hz;
if (xfer->speed_hz)
@@ -276,6 +416,7 @@ static int qcom_qspi_transfer_one(struct spi_master *master,
return ret;
spin_lock_irqsave(&ctrl->lock, flags);
+ mstr_cfg = readl(ctrl->base + MSTR_CONFIG);
/* We are half duplex, so either rx or tx will be set */
if (xfer->rx_buf) {
@@ -290,10 +431,36 @@ static int qcom_qspi_transfer_one(struct spi_master *master,
ctrl->xfer.is_last = list_is_last(&xfer->transfer_list,
&master->cur_msg->transfers);
ctrl->xfer.rem_bytes = xfer->len;
+
+ if (xfer->rx_sg.nents || xfer->tx_sg.nents) {
+ /* do DMA transfer */
+ if (!(mstr_cfg & DMA_ENABLE)) {
+ mstr_cfg |= DMA_ENABLE;
+ writel(mstr_cfg, ctrl->base + MSTR_CONFIG);
+ }
+
+ ret = qcom_qspi_setup_dma_desc(ctrl, xfer);
+ if (ret != -EAGAIN) {
+ if (!ret)
+ qcom_qspi_dma_xfer(ctrl);
+ goto exit;
+ }
+ dev_warn_once(ctrl->dev, "DMA failure, falling back to PIO");
+ ret = 0; /* We'll retry w/ PIO */
+ }
+
+ if (mstr_cfg & DMA_ENABLE) {
+ mstr_cfg &= ~DMA_ENABLE;
+ writel(mstr_cfg, ctrl->base + MSTR_CONFIG);
+ }
qcom_qspi_pio_xfer(ctrl);
+exit:
spin_unlock_irqrestore(&ctrl->lock, flags);
+ if (ret)
+ return ret;
+
/* We'll call spi_finalize_current_transfer() when done */
return 1;
}
@@ -328,6 +495,16 @@ static int qcom_qspi_prepare_message(struct spi_master *master,
return 0;
}
+static int qcom_qspi_alloc_dma(struct qcom_qspi *ctrl)
+{
+ ctrl->dma_cmd_pool = dmam_pool_create("qspi cmd desc pool",
+ ctrl->dev, sizeof(struct qspi_cmd_desc), 0, 0);
+ if (!ctrl->dma_cmd_pool)
+ return -ENOMEM;
+
+ return 0;
+}
+
static irqreturn_t pio_read(struct qcom_qspi *ctrl)
{
u32 rd_fifo_status;
@@ -426,6 +603,7 @@ static irqreturn_t qcom_qspi_irq(int irq, void *dev_id)
int_status = readl(ctrl->base + MSTR_INT_STATUS);
writel(int_status, ctrl->base + MSTR_INT_STATUS);
+ /* PIO mode handling */
if (ctrl->xfer.dir == QSPI_WRITE) {
if (int_status & WR_FIFO_EMPTY)
ret = pio_write(ctrl);
@@ -449,6 +627,22 @@ static irqreturn_t qcom_qspi_irq(int irq, void *dev_id)
spi_finalize_current_transfer(dev_get_drvdata(ctrl->dev));
}
+ /* DMA mode handling */
+ if (int_status & DMA_CHAIN_DONE) {
+ int i;
+
+ writel(0, ctrl->base + MSTR_INT_EN);
+ ctrl->xfer.rem_bytes = 0;
+
+ for (i = 0; i < ctrl->n_cmd_desc; i++)
+ dma_pool_free(ctrl->dma_cmd_pool, ctrl->virt_cmd_desc[i],
+ ctrl->dma_cmd_desc[i]);
+ ctrl->n_cmd_desc = 0;
+
+ ret = IRQ_HANDLED;
+ spi_finalize_current_transfer(dev_get_drvdata(ctrl->dev));
+ }
+
spin_unlock(&ctrl->lock);
return ret;
}
@@ -517,7 +711,13 @@ static int qcom_qspi_probe(struct platform_device *pdev)
return ret;
}
+ ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+ if (ret)
+ return dev_err_probe(dev, ret, "could not set DMA mask\n");
+
master->max_speed_hz = 300000000;
+ master->max_dma_len = 65536; /* as per HPG */
+ master->dma_alignment = QSPI_ALIGN_REQ;
master->num_chipselect = QSPI_NUM_CS;
master->bus_num = -1;
master->dev.of_node = pdev->dev.of_node;
@@ -528,6 +728,8 @@ static int qcom_qspi_probe(struct platform_device *pdev)
master->prepare_message = qcom_qspi_prepare_message;
master->transfer_one = qcom_qspi_transfer_one;
master->handle_err = qcom_qspi_handle_err;
+ if (of_property_read_bool(pdev->dev.of_node, "iommus"))
+ master->can_dma = qcom_qspi_can_dma;
master->auto_runtime_pm = true;
ret = devm_pm_opp_set_clkname(&pdev->dev, "core");
@@ -540,6 +742,10 @@ static int qcom_qspi_probe(struct platform_device *pdev)
return ret;
}
+ ret = qcom_qspi_alloc_dma(ctrl);
+ if (ret)
+ return ret;
+
pm_runtime_use_autosuspend(dev);
pm_runtime_set_autosuspend_delay(dev, 250);
pm_runtime_enable(dev);