[v2,3/6] docs: qcom: Add qualcomm minidump guide

diff --git a/Documentation/admin-guide/qcom_minidump.rst b/Documentation/admin-guide/qcom_minidump.rst
new file mode 100644
index 0000000..bdff1c9
--- /dev/null
+++ b/Documentation/admin-guide/qcom_minidump.rst
@@ -0,0 +1,240 @@ 
+Qualcomm Minidump Feature
+=========================
+
+Introduction
+------------
+
+Minidump is a best effort mechanism to collect useful and predefined
+data for first level of debugging on end user devices running on
+Qualcomm SoCs. It is built on the premise that System on Chip (SoC)
+or subsystem part of SoC crashes, due to a range of hardware and
+software bugs. Hence, the ability to collect accurate data is only
+a best-effort. The data collected could be invalid or corrupted, data
+collection itself could fail, and so on.
+
+Qualcomm devices in engineering mode provides a mechanism for generating
+full system ramdumps for post mortem debugging. But in some cases it's
+however not feasible to capture the entire content of RAM. The minidump
+mechanism provides the means for selecting region should be included in
+the ramdump.
+
+::
+
+   +-----------------------------------------------+
+   |   DDR                       +-------------+   |
+   |                             |      SS0-ToC|   |
+   | +----------------+     +----------------+ |   |
+   | |Shared memory   |     |         SS1-ToC| |   |
+   | |(SMEM)          |     |                | |   |
+   | |                | +-->|--------+       | |   |
+   | |G-ToC           | |   | SS-ToC  \      | |   |
+   | |+-------------+ | |   | +-----------+  | |   |
+   | ||-------------| | |   | |-----------|  | |   |
+   | || SS0-ToC     | | | +-|<|SS1 region1|  | |   |
+   | ||-------------| | | | | |-----------|  | |   |
+   | || SS1-ToC     |-|>+ | | |SS1 region2|  | |   |
+   | ||-------------| |   | | |-----------|  | |   |
+   | || SS2-ToC     | |   | | |  ...      |  | |   |
+   | ||-------------| |   | | |-----------|  | |   |
+   | ||  ...        | |   |-|<|SS1 regionN|  | |   |
+   | ||-------------| |   | | |-----------|  | |   |
+   | || SSn-ToC     | |   | | +-----------+  | |   |
+   | |+-------------+ |   | |                | |   |
+   | |                |   | |----------------| |   |
+   | |                |   +>|  regionN       | |   |
+   | |                |   | |----------------| |   |
+   | +----------------+   | |                | |   |
+   |                      | |----------------| |   |
+   |                      +>|  region1       | |   |
+   |                        |----------------| |   |
+   |                        |                | |   |
+   |                        |----------------|-+   |
+   |                        |  region5       |     |
+   |                        |----------------|     |
+   |                        |                |     |
+   |  Region information    +----------------+     |
+   | +---------------+                             |
+   | |region name    |                             |
+   | |---------------|                             |
+   | |region address |                             |
+   | |---------------|                             |
+   | |region size    |                             |
+   | +---------------+                             |
+   +-----------------------------------------------+
+       G-ToC: Global table of content
+       SS-ToC: Subsystem table of content
+       SS0-SSn: Subsystem numbered from 0 to n
+
+The core of minidump feature is part of Qualcomm's boot firmware code.
+It initializes shared memory(SMEM), which is a part of DDR and
+allocates a small section of it to minidump table i.e also called
+global table of content (G-ToC). Each subsystem (APSS, ADSP, ...) has
+their own table of segments to be included in the minidump, all
+references from a descriptor in SMEM (G-ToC). Each segment/region has
+some details like name, physical address and it's size etc. and it
+could be anywhere scattered in the DDR.
+
+Minidump kernel driver concept
+------------------------------
+
+Qualcomm minidump kernel driver adds the capability to add linux region
+to be dumped as part of ram dump collection. It provides appropriate
+symbol to check its enablement and register client region.
+
+To simplify post mortem debugging, it creates and maintain an ELF
+header as first region that gets updated each time a new region gets
+registered.
+
+The solution supports extracting the ramdump/minidump produced either
+over USB or stored to an attached storage device.
+
+Dependency of minidump kernel driver
+------------------------------------
+
+It is noted that minidump kernel driver depends on Qualcomm's
+shared memory (SMEM) driver and its device tree entry (device
+presence). If above support is present and Qualcomm boot firmware
+has minidump support, so it is possible to dump linux region as
+part of minidump collection.
+
+How a kernel client driver can register region with minidump
+------------------------------------------------------------
+
+Client driver can use qcom_minidump_ready() symbol to check if the
+minidump driver is supported on the target and if it return -ENODEV
+then it means minidump is not supported on this target and the client
+should not try to register their minidump region further and
+continue with their normal execution, and if it is supported it
+can go ahead register its region with qcom_minidump_region_register().
+
+Client need to fill their region by filling qcom_minidump_region
+structure object which consist of the region name, region's
+virtual and physical address and its size.
+
+Below is one sample client driver snippet which try to allocate
+a region from kernel heap of certain size and it writes a certain
+known pattern (that can help in verification after collection
+that we got the exact pattern, what we wrote) and registers with
+minidump.
+
+ .. code-block:: c
+
+  #include <soc/qcom/minidump.h>
+  [...]
+
+
+  [... inside a function ...]
+  struct qcom_minidump_region region;
+
+  [...]
+
+  client_mem_region = kzalloc(region_size, GFP_KERNEL);
+  if (!client_mem_region)
+	return -ENOMEM;
+
+  [... Just write a pattern ...]
+  memset(client_mem_region, 0xAB, region_size);
+
+  [... Check if minidump is ready return -EPROBE_DEFER
+   if this is a probe function otherwise return accordingly ...]
+  err = qcom_minidump_ready();
+  if (err && err != -ENODEV)
+	return -EPROBE_DEFER;
+
+  strlcpy(region.name, "REGION_A", sizeof(region.name));
+  region.virt_addr = client_mem_region;
+  region.phys_addr = virt_to_phys(client_mem_region);
+  region.size = region_size;
+
+  if (!err) {
+	ret = qcom_minidump_region_register(&region);
+	if (ret < 0) {
+		pr_err("failed to add region in minidump: err: %d\n", ret);
+		return ret;
+	}
+  }
+
+  [...]
+
+
+Test
+----
+
+Existing Qualcomm devices already supports entire ddr dump (also called
+full dump) via writing appropriate value to Qualcomm's top control and
+status register(tcsr) in driver/firmware/qcom_scm.c .
+
+SCM device Tree bindings required to support download mode
+For example (sm8450) ::
+
+	/ {
+
+	[...]
+
+		firmware {
+			scm: scm {
+				compatible = "qcom,scm-sm8450", "qcom,scm";
+				[... tcsr register ... ]
+				qcom,dload-mode = <&tcsr 0x13000>;
+
+				[...]
+			};
+		};
+
+	[...]
+
+		soc: soc@0 {
+
+			[...]
+
+			tcsr: syscon@1fc0000 {
+				compatible = "qcom,sm8450-tcsr", "syscon";
+				reg = <0x0 0x1fc0000 0x0 0x30000>;
+			};
+
+			[...]
+		};
+	[...]
+
+	};
+
+User of minidump can pass qcom_scm.download_mode="mini" to kernel
+commandline to set the current download mode to minidump.
+
+Similarly, "full" is passed to set the download mode to full dump
+where entire ddr dump will be collected while setting it "both"
+will set the mode to both (mini + full).
+
+sysfs can also be used to set the mode to minidump.
+
+::
+	echo "mini" > /sys/module/qcom_scm/parameter/download_mode
+
+Once the download mode is set, any kind of crash will make the device collect
+respective dump as per set download mode.
+
+Dump collection
+---------------
+
+The solution supports extracting the minidump produced either over USB or
+stored to an attached storage device.
+
+By default, dumps are downloaded via USB to the attached x86_64 machine
+running PCAT (Qualcomm tool) software. Upon download, we will see
+a set of binary blobs starts with name md_* in PCAT configured directory
+in x86_64 machine, so for above example from the client it will be
+md_REGION_A.BIN. This binary blob depends on region content to determine
+whether it needs external parser support to get the content of the region,
+so for simple plain ASCII text we don't need any parsing and the content
+can be seen just opening the binary file.
+
+To collect the dump to attached storage type, one need to write appropriate
+value to IMEM register, in that case dumps are collected in rawdump
+partition on the target device itself.
+
+One need to read the entire rawdump partition and pull out content to
+save it onto the attached x86_64 machine over USB. Later, this rawdump
+can be pass it to another tool dexter.exe(Qualcomm tool) which converts
+this into the similar binary blobs which we have got it when download type
+was set to USB i.e a set of registered region as blobs and their name
+starts with md_*.