[net-next,v7,08/10] powerpc: dts: t208x: Mark MAC1 and MAC2 as 10G

Message ID 20221017202241.1741671-9-sean.anderson@seco.com
State New
Headers
Series net: dpaa: Convert to phylink |

Commit Message

Sean Anderson Oct. 17, 2022, 8:22 p.m. UTC
  On the T208X SoCs, MAC1 and MAC2 support XGMII. Add some new MAC dtsi
fragments, and mark the QMAN ports as 10G.

Fixes: da414bb923d9 ("powerpc/mpc85xx: Add FSL QorIQ DPAA FMan support to the SoC device tree(s)")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---

(no changes since v4)

Changes in v4:
- New

 .../boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi     | 44 +++++++++++++++++++
 .../boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi     | 44 +++++++++++++++++++
 arch/powerpc/boot/dts/fsl/t2081si-post.dtsi   |  4 +-
 3 files changed, 90 insertions(+), 2 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
  

Comments

Camelia Alexandra Groza Oct. 28, 2022, 4:30 p.m. UTC | #1
> -----Original Message-----
> From: Sean Anderson <sean.anderson@seco.com>
> Sent: Monday, October 17, 2022 23:23
> To: David S . Miller <davem@davemloft.net>; Jakub Kicinski
> <kuba@kernel.org>; Madalin Bucur <madalin.bucur@nxp.com>; Camelia
> Alexandra Groza <camelia.groza@nxp.com>; netdev@vger.kernel.org
> Cc: Eric Dumazet <edumazet@google.com>; linuxppc-dev @ lists . ozlabs .
> org <linuxppc-dev@lists.ozlabs.org>; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; Russell King <linux@armlinux.org.uk>; Paolo
> Abeni <pabeni@redhat.com>; Sean Anderson <sean.anderson@seco.com>;
> Benjamin Herrenschmidt <benh@kernel.crashing.org>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@linaro.org>; Leo Li <leoyang.li@nxp.com>; Michael
> Ellerman <mpe@ellerman.id.au>; Paul Mackerras <paulus@samba.org>; Rob
> Herring <robh+dt@kernel.org>; devicetree@vger.kernel.org
> Subject: [PATCH net-next v7 08/10] powerpc: dts: t208x: Mark MAC1 and
> MAC2 as 10G
> 
> On the T208X SoCs, MAC1 and MAC2 support XGMII. Add some new MAC
> dtsi
> fragments, and mark the QMAN ports as 10G.
> 
> Fixes: da414bb923d9 ("powerpc/mpc85xx: Add FSL QorIQ DPAA FMan
> support to the SoC device tree(s)")
> Signed-off-by: Sean Anderson <sean.anderson@seco.com>
> ---
> 
> (no changes since v4)
> 
> Changes in v4:
> - New

Hi Sean,

These changes prevent MAC2 from probing on T2080RDB due to insufficient FMan hardware resources.

fsl-fman ffe400000.fman: set_num_of_tasks: Requested num_of_tasks and extra tasks pool for fm0 exceed total num_of_tasks.
fsl_dpa: dpaa_eth_init_tx_port: fm_port_init failed
fsl_dpa: probe of dpaa-ethernet.5 failed with error -11

The distribution of resources depends on the port type, and different FMan hardware revisions have different amounts of resources.

The current distribution of resources can be reconsidered, but this change should be reverted for now.

Regards,
Camelia


>  .../boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi     | 44 +++++++++++++++++++
>  .../boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi     | 44 +++++++++++++++++++
>  arch/powerpc/boot/dts/fsl/t2081si-post.dtsi   |  4 +-
>  3 files changed, 90 insertions(+), 2 deletions(-)
>  create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
>  create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
> 
> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
> b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
> new file mode 100644
> index 000000000000..437dab3fc017
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
> @@ -0,0 +1,44 @@
> +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
> +/*
> + * QorIQ FMan v3 10g port #2 device tree stub [ controller @ offset
> 0x400000 ]
> + *
> + * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
> + * Copyright 2012 - 2015 Freescale Semiconductor Inc.
> + */
> +
> +fman@400000 {
> +	fman0_rx_0x08: port@88000 {
> +		cell-index = <0x8>;
> +		compatible = "fsl,fman-v3-port-rx";
> +		reg = <0x88000 0x1000>;
> +		fsl,fman-10g-port;
> +	};
> +
> +	fman0_tx_0x28: port@a8000 {
> +		cell-index = <0x28>;
> +		compatible = "fsl,fman-v3-port-tx";
> +		reg = <0xa8000 0x1000>;
> +		fsl,fman-10g-port;
> +	};
> +
> +	ethernet@e0000 {
> +		cell-index = <0>;
> +		compatible = "fsl,fman-memac";
> +		reg = <0xe0000 0x1000>;
> +		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
> +		ptp-timer = <&ptp_timer0>;
> +		pcsphy-handle = <&pcsphy0>;
> +	};
> +
> +	mdio@e1000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
> +		reg = <0xe1000 0x1000>;
> +		fsl,erratum-a011043; /* must ignore read errors */
> +
> +		pcsphy0: ethernet-phy@0 {
> +			reg = <0x0>;
> +		};
> +	};
> +};
> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
> b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
> new file mode 100644
> index 000000000000..ad116b17850a
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
> @@ -0,0 +1,44 @@
> +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
> +/*
> + * QorIQ FMan v3 10g port #3 device tree stub [ controller @ offset
> 0x400000 ]
> + *
> + * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
> + * Copyright 2012 - 2015 Freescale Semiconductor Inc.
> + */
> +
> +fman@400000 {
> +	fman0_rx_0x09: port@89000 {
> +		cell-index = <0x9>;
> +		compatible = "fsl,fman-v3-port-rx";
> +		reg = <0x89000 0x1000>;
> +		fsl,fman-10g-port;
> +	};
> +
> +	fman0_tx_0x29: port@a9000 {
> +		cell-index = <0x29>;
> +		compatible = "fsl,fman-v3-port-tx";
> +		reg = <0xa9000 0x1000>;
> +		fsl,fman-10g-port;
> +	};
> +
> +	ethernet@e2000 {
> +		cell-index = <1>;
> +		compatible = "fsl,fman-memac";
> +		reg = <0xe2000 0x1000>;
> +		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
> +		ptp-timer = <&ptp_timer0>;
> +		pcsphy-handle = <&pcsphy1>;
> +	};
> +
> +	mdio@e3000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
> +		reg = <0xe3000 0x1000>;
> +		fsl,erratum-a011043; /* must ignore read errors */
> +
> +		pcsphy1: ethernet-phy@0 {
> +			reg = <0x0>;
> +		};
> +	};
> +};
> diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
> b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
> index ecbb447920bc..74e17e134387 100644
> --- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
> +++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
> @@ -609,8 +609,8 @@ usb1: usb@211000 {
>  /include/ "qoriq-bman1.dtsi"
> 
>  /include/ "qoriq-fman3-0.dtsi"
> -/include/ "qoriq-fman3-0-1g-0.dtsi"
> -/include/ "qoriq-fman3-0-1g-1.dtsi"
> +/include/ "qoriq-fman3-0-10g-2.dtsi"
> +/include/ "qoriq-fman3-0-10g-3.dtsi"
>  /include/ "qoriq-fman3-0-1g-2.dtsi"
>  /include/ "qoriq-fman3-0-1g-3.dtsi"
>  /include/ "qoriq-fman3-0-1g-4.dtsi"
> --
> 2.35.1.1320.gc452695387.dirty
  
Sean Anderson Oct. 28, 2022, 4:54 p.m. UTC | #2
On 10/28/22 12:30, Camelia Alexandra Groza wrote:
>> -----Original Message-----
>> From: Sean Anderson <sean.anderson@seco.com>
>> Sent: Monday, October 17, 2022 23:23
>> To: David S . Miller <davem@davemloft.net>; Jakub Kicinski
>> <kuba@kernel.org>; Madalin Bucur <madalin.bucur@nxp.com>; Camelia
>> Alexandra Groza <camelia.groza@nxp.com>; netdev@vger.kernel.org
>> Cc: Eric Dumazet <edumazet@google.com>; linuxppc-dev @ lists . ozlabs .
>> org <linuxppc-dev@lists.ozlabs.org>; linux-arm-kernel@lists.infradead.org;
>> linux-kernel@vger.kernel.org; Russell King <linux@armlinux.org.uk>; Paolo
>> Abeni <pabeni@redhat.com>; Sean Anderson <sean.anderson@seco.com>;
>> Benjamin Herrenschmidt <benh@kernel.crashing.org>; Krzysztof Kozlowski
>> <krzysztof.kozlowski+dt@linaro.org>; Leo Li <leoyang.li@nxp.com>; Michael
>> Ellerman <mpe@ellerman.id.au>; Paul Mackerras <paulus@samba.org>; Rob
>> Herring <robh+dt@kernel.org>; devicetree@vger.kernel.org
>> Subject: [PATCH net-next v7 08/10] powerpc: dts: t208x: Mark MAC1 and
>> MAC2 as 10G
>>
>> On the T208X SoCs, MAC1 and MAC2 support XGMII. Add some new MAC
>> dtsi
>> fragments, and mark the QMAN ports as 10G.
>>
>> Fixes: da414bb923d9 ("powerpc/mpc85xx: Add FSL QorIQ DPAA FMan
>> support to the SoC device tree(s)")
>> Signed-off-by: Sean Anderson <sean.anderson@seco.com>
>> ---
>>
>> (no changes since v4)
>>
>> Changes in v4:
>> - New
> 
> Hi Sean,
> 
> These changes prevent MAC2 from probing on T2080RDB due to insufficient FMan hardware resources.
> 
> fsl-fman ffe400000.fman: set_num_of_tasks: Requested num_of_tasks and extra tasks pool for fm0 exceed total num_of_tasks.
> fsl_dpa: dpaa_eth_init_tx_port: fm_port_init failed
> fsl_dpa: probe of dpaa-ethernet.5 failed with error -11
> 
> The distribution of resources depends on the port type, and different FMan hardware revisions have different amounts of resources.
> 
> The current distribution of resources can be reconsidered, but this change should be reverted for now.

OK, so this patch does two things:

@@ -37,12 +11,14 @@
  		cell-index = <0x8>;
  		compatible = "fsl,fman-v3-port-rx";
  		reg = <0x88000 0x1000>;
+		fsl,fman-10g-port;
  	};
  
  	fman0_tx_0x28: port@a8000 {
  		cell-index = <0x28>;
  		compatible = "fsl,fman-v3-port-tx";
  		reg = <0xa8000 0x1000>;
+		fsl,fman-10g-port;
  	};
  
  	ethernet@e0000 {
@@ -52,7 +28,7 @@
  		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
  		ptp-timer = <&ptp_timer0>;
  		pcsphy-handle = <&pcsphy0>, <&pcsphy0>;
-		pcs-handle-names = "sgmii", "qsgmii";
+		pcs-handle-names = "sgmii", "xfi";
  	};
  
  	mdio@e1000 {

First, it marks the ports as 10g. I believe this is what's causing the
resource problems above. Second, it removes support for QSGMII and adds
support for XFI. This is a matter of correctness; these MACs really
don't support QSGMII, and do support XFI. As I understand it, you can
run a 10g port at 1g speeds, it just won't perform as well. So I think a
more minimal revert would be to delete the fsl,fman-10g-port properties
in t2081si-post.dtsi.

That said, is 10g even being used on these ports? I included this patch
in order to avoid breaking any existing users.

--Sean

> Regards,
> Camelia
> 
> 
>>   .../boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi     | 44 +++++++++++++++++++
>>   .../boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi     | 44 +++++++++++++++++++
>>   arch/powerpc/boot/dts/fsl/t2081si-post.dtsi   |  4 +-
>>   3 files changed, 90 insertions(+), 2 deletions(-)
>>   create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
>>   create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
>>
>> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
>> b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
>> new file mode 100644
>> index 000000000000..437dab3fc017
>> --- /dev/null
>> +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
>> @@ -0,0 +1,44 @@
>> +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
>> +/*
>> + * QorIQ FMan v3 10g port #2 device tree stub [ controller @ offset
>> 0x400000 ]
>> + *
>> + * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
>> + * Copyright 2012 - 2015 Freescale Semiconductor Inc.
>> + */
>> +
>> +fman@400000 {
>> +	fman0_rx_0x08: port@88000 {
>> +		cell-index = <0x8>;
>> +		compatible = "fsl,fman-v3-port-rx";
>> +		reg = <0x88000 0x1000>;
>> +		fsl,fman-10g-port;
>> +	};
>> +
>> +	fman0_tx_0x28: port@a8000 {
>> +		cell-index = <0x28>;
>> +		compatible = "fsl,fman-v3-port-tx";
>> +		reg = <0xa8000 0x1000>;
>> +		fsl,fman-10g-port;
>> +	};
>> +
>> +	ethernet@e0000 {
>> +		cell-index = <0>;
>> +		compatible = "fsl,fman-memac";
>> +		reg = <0xe0000 0x1000>;
>> +		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
>> +		ptp-timer = <&ptp_timer0>;
>> +		pcsphy-handle = <&pcsphy0>;
>> +	};
>> +
>> +	mdio@e1000 {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
>> +		reg = <0xe1000 0x1000>;
>> +		fsl,erratum-a011043; /* must ignore read errors */
>> +
>> +		pcsphy0: ethernet-phy@0 {
>> +			reg = <0x0>;
>> +		};
>> +	};
>> +};
>> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
>> b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
>> new file mode 100644
>> index 000000000000..ad116b17850a
>> --- /dev/null
>> +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
>> @@ -0,0 +1,44 @@
>> +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
>> +/*
>> + * QorIQ FMan v3 10g port #3 device tree stub [ controller @ offset
>> 0x400000 ]
>> + *
>> + * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
>> + * Copyright 2012 - 2015 Freescale Semiconductor Inc.
>> + */
>> +
>> +fman@400000 {
>> +	fman0_rx_0x09: port@89000 {
>> +		cell-index = <0x9>;
>> +		compatible = "fsl,fman-v3-port-rx";
>> +		reg = <0x89000 0x1000>;
>> +		fsl,fman-10g-port;
>> +	};
>> +
>> +	fman0_tx_0x29: port@a9000 {
>> +		cell-index = <0x29>;
>> +		compatible = "fsl,fman-v3-port-tx";
>> +		reg = <0xa9000 0x1000>;
>> +		fsl,fman-10g-port;
>> +	};
>> +
>> +	ethernet@e2000 {
>> +		cell-index = <1>;
>> +		compatible = "fsl,fman-memac";
>> +		reg = <0xe2000 0x1000>;
>> +		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
>> +		ptp-timer = <&ptp_timer0>;
>> +		pcsphy-handle = <&pcsphy1>;
>> +	};
>> +
>> +	mdio@e3000 {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
>> +		reg = <0xe3000 0x1000>;
>> +		fsl,erratum-a011043; /* must ignore read errors */
>> +
>> +		pcsphy1: ethernet-phy@0 {
>> +			reg = <0x0>;
>> +		};
>> +	};
>> +};
>> diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
>> b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
>> index ecbb447920bc..74e17e134387 100644
>> --- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
>> +++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
>> @@ -609,8 +609,8 @@ usb1: usb@211000 {
>>   /include/ "qoriq-bman1.dtsi"
>>
>>   /include/ "qoriq-fman3-0.dtsi"
>> -/include/ "qoriq-fman3-0-1g-0.dtsi"
>> -/include/ "qoriq-fman3-0-1g-1.dtsi"
>> +/include/ "qoriq-fman3-0-10g-2.dtsi"
>> +/include/ "qoriq-fman3-0-10g-3.dtsi"
>>   /include/ "qoriq-fman3-0-1g-2.dtsi"
>>   /include/ "qoriq-fman3-0-1g-3.dtsi"
>>   /include/ "qoriq-fman3-0-1g-4.dtsi"
>> --
>> 2.35.1.1320.gc452695387.dirty
>
  
Camelia Alexandra Groza Oct. 31, 2022, 2:12 p.m. UTC | #3
> -----Original Message-----
> From: Sean Anderson <sean.anderson@seco.com>
> Sent: Friday, October 28, 2022 19:55
> To: Camelia Alexandra Groza <camelia.groza@nxp.com>; Sean Anderson
> <sean.anderson@seco.com>; David S . Miller <davem@davemloft.net>;
> Jakub Kicinski <kuba@kernel.org>; Madalin Bucur
> <madalin.bucur@nxp.com>; netdev@vger.kernel.org
> Cc: Eric Dumazet <edumazet@google.com>; linuxppc-dev @ lists . ozlabs .
> org <linuxppc-dev@lists.ozlabs.org>; linux-arm-kernel@lists.infradead.org;
> linux-kernel@vger.kernel.org; Russell King <linux@armlinux.org.uk>; Paolo
> Abeni <pabeni@redhat.com>; Benjamin Herrenschmidt
> <benh@kernel.crashing.org>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@linaro.org>; Leo Li <leoyang.li@nxp.com>; Michael
> Ellerman <mpe@ellerman.id.au>; Paul Mackerras <paulus@samba.org>; Rob
> Herring <robh+dt@kernel.org>; devicetree@vger.kernel.org
> Subject: Re: [PATCH net-next v7 08/10] powerpc: dts: t208x: Mark MAC1 and
> MAC2 as 10G
> 
> On 10/28/22 12:30, Camelia Alexandra Groza wrote:
> >> -----Original Message-----
> >> From: Sean Anderson <sean.anderson@seco.com>
> >> Sent: Monday, October 17, 2022 23:23
> >> To: David S . Miller <davem@davemloft.net>; Jakub Kicinski
> >> <kuba@kernel.org>; Madalin Bucur <madalin.bucur@nxp.com>; Camelia
> >> Alexandra Groza <camelia.groza@nxp.com>; netdev@vger.kernel.org
> >> Cc: Eric Dumazet <edumazet@google.com>; linuxppc-dev @ lists . ozlabs .
> >> org <linuxppc-dev@lists.ozlabs.org>; linux-arm-
> kernel@lists.infradead.org;
> >> linux-kernel@vger.kernel.org; Russell King <linux@armlinux.org.uk>;
> Paolo
> >> Abeni <pabeni@redhat.com>; Sean Anderson
> <sean.anderson@seco.com>;
> >> Benjamin Herrenschmidt <benh@kernel.crashing.org>; Krzysztof
> Kozlowski
> >> <krzysztof.kozlowski+dt@linaro.org>; Leo Li <leoyang.li@nxp.com>;
> Michael
> >> Ellerman <mpe@ellerman.id.au>; Paul Mackerras <paulus@samba.org>;
> Rob
> >> Herring <robh+dt@kernel.org>; devicetree@vger.kernel.org
> >> Subject: [PATCH net-next v7 08/10] powerpc: dts: t208x: Mark MAC1 and
> >> MAC2 as 10G
> >>
> >> On the T208X SoCs, MAC1 and MAC2 support XGMII. Add some new MAC
> >> dtsi
> >> fragments, and mark the QMAN ports as 10G.
> >>
> >> Fixes: da414bb923d9 ("powerpc/mpc85xx: Add FSL QorIQ DPAA FMan
> >> support to the SoC device tree(s)")
> >> Signed-off-by: Sean Anderson <sean.anderson@seco.com>
> >> ---
> >>
> >> (no changes since v4)
> >>
> >> Changes in v4:
> >> - New
> >
> > Hi Sean,
> >
> > These changes prevent MAC2 from probing on T2080RDB due to
> insufficient FMan hardware resources.
> >
> > fsl-fman ffe400000.fman: set_num_of_tasks: Requested num_of_tasks
> and extra tasks pool for fm0 exceed total num_of_tasks.
> > fsl_dpa: dpaa_eth_init_tx_port: fm_port_init failed
> > fsl_dpa: probe of dpaa-ethernet.5 failed with error -11
> >
> > The distribution of resources depends on the port type, and different
> FMan hardware revisions have different amounts of resources.
> >
> > The current distribution of resources can be reconsidered, but this change
> should be reverted for now.
> 
> OK, so this patch does two things:
> 
> @@ -37,12 +11,14 @@
>   		cell-index = <0x8>;
>   		compatible = "fsl,fman-v3-port-rx";
>   		reg = <0x88000 0x1000>;
> +		fsl,fman-10g-port;
>   	};
> 
>   	fman0_tx_0x28: port@a8000 {
>   		cell-index = <0x28>;
>   		compatible = "fsl,fman-v3-port-tx";
>   		reg = <0xa8000 0x1000>;
> +		fsl,fman-10g-port;
>   	};
> 
>   	ethernet@e0000 {
> @@ -52,7 +28,7 @@
>   		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
>   		ptp-timer = <&ptp_timer0>;
>   		pcsphy-handle = <&pcsphy0>, <&pcsphy0>;
> -		pcs-handle-names = "sgmii", "qsgmii";
> +		pcs-handle-names = "sgmii", "xfi";
>   	};
> 
>   	mdio@e1000 {
> 
> First, it marks the ports as 10g. I believe this is what's causing the
> resource problems above.

That's right.

> Second, it removes support for QSGMII and adds
> support for XFI. This is a matter of correctness; these MACs really
> don't support QSGMII, and do support XFI.

Correct, these MACs don't support QSGMII on this SoC.

> As I understand it, you can
> run a 10g port at 1g speeds, it just won't perform as well. So I think a
> more minimal revert would be to delete the fsl,fman-10g-port properties
> in t2081si-post.dtsi.

Since these two new dtsi files are included by only one SoC, I don't see an
advantage in adding these properties and then deleting them. No other
users benefit from adding them in the first place. 

> That said, is 10g even being used on these ports? I included this patch
> in order to avoid breaking any existing users.

It is used, though less efficiently, with fewer FMan hardware resources.

Camelia

> --Sean
> 
> > Regards,
> > Camelia
> >
> >
> >>   .../boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi     | 44 +++++++++++++++++++
> >>   .../boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi     | 44 +++++++++++++++++++
> >>   arch/powerpc/boot/dts/fsl/t2081si-post.dtsi   |  4 +-
> >>   3 files changed, 90 insertions(+), 2 deletions(-)
> >>   create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-
> 2.dtsi
> >>   create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-
> 3.dtsi
> >>
> >> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
> >> b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
> >> new file mode 100644
> >> index 000000000000..437dab3fc017
> >> --- /dev/null
> >> +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
> >> @@ -0,0 +1,44 @@
> >> +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
> >> +/*
> >> + * QorIQ FMan v3 10g port #2 device tree stub [ controller @ offset
> >> 0x400000 ]
> >> + *
> >> + * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
> >> + * Copyright 2012 - 2015 Freescale Semiconductor Inc.
> >> + */
> >> +
> >> +fman@400000 {
> >> +	fman0_rx_0x08: port@88000 {
> >> +		cell-index = <0x8>;
> >> +		compatible = "fsl,fman-v3-port-rx";
> >> +		reg = <0x88000 0x1000>;
> >> +		fsl,fman-10g-port;
> >> +	};
> >> +
> >> +	fman0_tx_0x28: port@a8000 {
> >> +		cell-index = <0x28>;
> >> +		compatible = "fsl,fman-v3-port-tx";
> >> +		reg = <0xa8000 0x1000>;
> >> +		fsl,fman-10g-port;
> >> +	};
> >> +
> >> +	ethernet@e0000 {
> >> +		cell-index = <0>;
> >> +		compatible = "fsl,fman-memac";
> >> +		reg = <0xe0000 0x1000>;
> >> +		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
> >> +		ptp-timer = <&ptp_timer0>;
> >> +		pcsphy-handle = <&pcsphy0>;
> >> +	};
> >> +
> >> +	mdio@e1000 {
> >> +		#address-cells = <1>;
> >> +		#size-cells = <0>;
> >> +		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
> >> +		reg = <0xe1000 0x1000>;
> >> +		fsl,erratum-a011043; /* must ignore read errors */
> >> +
> >> +		pcsphy0: ethernet-phy@0 {
> >> +			reg = <0x0>;
> >> +		};
> >> +	};
> >> +};
> >> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
> >> b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
> >> new file mode 100644
> >> index 000000000000..ad116b17850a
> >> --- /dev/null
> >> +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
> >> @@ -0,0 +1,44 @@
> >> +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
> >> +/*
> >> + * QorIQ FMan v3 10g port #3 device tree stub [ controller @ offset
> >> 0x400000 ]
> >> + *
> >> + * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
> >> + * Copyright 2012 - 2015 Freescale Semiconductor Inc.
> >> + */
> >> +
> >> +fman@400000 {
> >> +	fman0_rx_0x09: port@89000 {
> >> +		cell-index = <0x9>;
> >> +		compatible = "fsl,fman-v3-port-rx";
> >> +		reg = <0x89000 0x1000>;
> >> +		fsl,fman-10g-port;
> >> +	};
> >> +
> >> +	fman0_tx_0x29: port@a9000 {
> >> +		cell-index = <0x29>;
> >> +		compatible = "fsl,fman-v3-port-tx";
> >> +		reg = <0xa9000 0x1000>;
> >> +		fsl,fman-10g-port;
> >> +	};
> >> +
> >> +	ethernet@e2000 {
> >> +		cell-index = <1>;
> >> +		compatible = "fsl,fman-memac";
> >> +		reg = <0xe2000 0x1000>;
> >> +		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
> >> +		ptp-timer = <&ptp_timer0>;
> >> +		pcsphy-handle = <&pcsphy1>;
> >> +	};
> >> +
> >> +	mdio@e3000 {
> >> +		#address-cells = <1>;
> >> +		#size-cells = <0>;
> >> +		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
> >> +		reg = <0xe3000 0x1000>;
> >> +		fsl,erratum-a011043; /* must ignore read errors */
> >> +
> >> +		pcsphy1: ethernet-phy@0 {
> >> +			reg = <0x0>;
> >> +		};
> >> +	};
> >> +};
> >> diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
> >> b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
> >> index ecbb447920bc..74e17e134387 100644
> >> --- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
> >> +++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
> >> @@ -609,8 +609,8 @@ usb1: usb@211000 {
> >>   /include/ "qoriq-bman1.dtsi"
> >>
> >>   /include/ "qoriq-fman3-0.dtsi"
> >> -/include/ "qoriq-fman3-0-1g-0.dtsi"
> >> -/include/ "qoriq-fman3-0-1g-1.dtsi"
> >> +/include/ "qoriq-fman3-0-10g-2.dtsi"
> >> +/include/ "qoriq-fman3-0-10g-3.dtsi"
> >>   /include/ "qoriq-fman3-0-1g-2.dtsi"
> >>   /include/ "qoriq-fman3-0-1g-3.dtsi"
> >>   /include/ "qoriq-fman3-0-1g-4.dtsi"
> >> --
> >> 2.35.1.1320.gc452695387.dirty
> >
  
Sean Anderson Oct. 31, 2022, 10:19 p.m. UTC | #4
On 10/31/22 10:12, Camelia Alexandra Groza wrote:
>> -----Original Message-----
>> From: Sean Anderson <sean.anderson@seco.com>
>> Sent: Friday, October 28, 2022 19:55
>> To: Camelia Alexandra Groza <camelia.groza@nxp.com>; Sean Anderson
>> <sean.anderson@seco.com>; David S . Miller <davem@davemloft.net>;
>> Jakub Kicinski <kuba@kernel.org>; Madalin Bucur
>> <madalin.bucur@nxp.com>; netdev@vger.kernel.org
>> Cc: Eric Dumazet <edumazet@google.com>; linuxppc-dev @ lists . ozlabs .
>> org <linuxppc-dev@lists.ozlabs.org>; linux-arm-kernel@lists.infradead.org;
>> linux-kernel@vger.kernel.org; Russell King <linux@armlinux.org.uk>; Paolo
>> Abeni <pabeni@redhat.com>; Benjamin Herrenschmidt
>> <benh@kernel.crashing.org>; Krzysztof Kozlowski
>> <krzysztof.kozlowski+dt@linaro.org>; Leo Li <leoyang.li@nxp.com>; Michael
>> Ellerman <mpe@ellerman.id.au>; Paul Mackerras <paulus@samba.org>; Rob
>> Herring <robh+dt@kernel.org>; devicetree@vger.kernel.org
>> Subject: Re: [PATCH net-next v7 08/10] powerpc: dts: t208x: Mark MAC1 and
>> MAC2 as 10G
>> 
>> On 10/28/22 12:30, Camelia Alexandra Groza wrote:
>> >> -----Original Message-----
>> >> From: Sean Anderson <sean.anderson@seco.com>
>> >> Sent: Monday, October 17, 2022 23:23
>> >> To: David S . Miller <davem@davemloft.net>; Jakub Kicinski
>> >> <kuba@kernel.org>; Madalin Bucur <madalin.bucur@nxp.com>; Camelia
>> >> Alexandra Groza <camelia.groza@nxp.com>; netdev@vger.kernel.org
>> >> Cc: Eric Dumazet <edumazet@google.com>; linuxppc-dev @ lists . ozlabs .
>> >> org <linuxppc-dev@lists.ozlabs.org>; linux-arm-
>> kernel@lists.infradead.org;
>> >> linux-kernel@vger.kernel.org; Russell King <linux@armlinux.org.uk>;
>> Paolo
>> >> Abeni <pabeni@redhat.com>; Sean Anderson
>> <sean.anderson@seco.com>;
>> >> Benjamin Herrenschmidt <benh@kernel.crashing.org>; Krzysztof
>> Kozlowski
>> >> <krzysztof.kozlowski+dt@linaro.org>; Leo Li <leoyang.li@nxp.com>;
>> Michael
>> >> Ellerman <mpe@ellerman.id.au>; Paul Mackerras <paulus@samba.org>;
>> Rob
>> >> Herring <robh+dt@kernel.org>; devicetree@vger.kernel.org
>> >> Subject: [PATCH net-next v7 08/10] powerpc: dts: t208x: Mark MAC1 and
>> >> MAC2 as 10G
>> >>
>> >> On the T208X SoCs, MAC1 and MAC2 support XGMII. Add some new MAC
>> >> dtsi
>> >> fragments, and mark the QMAN ports as 10G.
>> >>
>> >> Fixes: da414bb923d9 ("powerpc/mpc85xx: Add FSL QorIQ DPAA FMan
>> >> support to the SoC device tree(s)")
>> >> Signed-off-by: Sean Anderson <sean.anderson@seco.com>
>> >> ---
>> >>
>> >> (no changes since v4)
>> >>
>> >> Changes in v4:
>> >> - New
>> >
>> > Hi Sean,
>> >
>> > These changes prevent MAC2 from probing on T2080RDB due to
>> insufficient FMan hardware resources.
>> >
>> > fsl-fman ffe400000.fman: set_num_of_tasks: Requested num_of_tasks
>> and extra tasks pool for fm0 exceed total num_of_tasks.
>> > fsl_dpa: dpaa_eth_init_tx_port: fm_port_init failed
>> > fsl_dpa: probe of dpaa-ethernet.5 failed with error -11
>> >
>> > The distribution of resources depends on the port type, and different
>> FMan hardware revisions have different amounts of resources.
>> >
>> > The current distribution of resources can be reconsidered, but this change
>> should be reverted for now.
>> 
>> OK, so this patch does two things:
>> 
>> @@ -37,12 +11,14 @@
>>   		cell-index = <0x8>;
>>   		compatible = "fsl,fman-v3-port-rx";
>>   		reg = <0x88000 0x1000>;
>> +		fsl,fman-10g-port;
>>   	};
>> 
>>   	fman0_tx_0x28: port@a8000 {
>>   		cell-index = <0x28>;
>>   		compatible = "fsl,fman-v3-port-tx";
>>   		reg = <0xa8000 0x1000>;
>> +		fsl,fman-10g-port;
>>   	};
>> 
>>   	ethernet@e0000 {
>> @@ -52,7 +28,7 @@
>>   		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
>>   		ptp-timer = <&ptp_timer0>;
>>   		pcsphy-handle = <&pcsphy0>, <&pcsphy0>;
>> -		pcs-handle-names = "sgmii", "qsgmii";
>> +		pcs-handle-names = "sgmii", "xfi";
>>   	};
>> 
>>   	mdio@e1000 {
>> 
>> First, it marks the ports as 10g. I believe this is what's causing the
>> resource problems above.
> 
> That's right.
> 
>> Second, it removes support for QSGMII and adds
>> support for XFI. This is a matter of correctness; these MACs really
>> don't support QSGMII, and do support XFI.
> 
> Correct, these MACs don't support QSGMII on this SoC.
> 
>> As I understand it, you can
>> run a 10g port at 1g speeds, it just won't perform as well. So I think a
>> more minimal revert would be to delete the fsl,fman-10g-port properties
>> in t2081si-post.dtsi.
> 
> Since these two new dtsi files are included by only one SoC, I don't see an
> advantage in adding these properties and then deleting them. No other
> users benefit from adding them in the first place. 

OK, so would you prefer just overriding pcs-handle-names in the SoC dtsi?

--Sean

>> That said, is 10g even being used on these ports? I included this patch
>> in order to avoid breaking any existing users.
> 
> It is used, though less efficiently, with fewer FMan hardware resources.
> 
> Camelia
> 
>> --Sean
>> 
>> > Regards,
>> > Camelia
>> >
>> >
>> >>   .../boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi     | 44 +++++++++++++++++++
>> >>   .../boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi     | 44 +++++++++++++++++++
>> >>   arch/powerpc/boot/dts/fsl/t2081si-post.dtsi   |  4 +-
>> >>   3 files changed, 90 insertions(+), 2 deletions(-)
>> >>   create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-
>> 2.dtsi
>> >>   create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-
>> 3.dtsi
>> >>
>> >> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
>> >> b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
>> >> new file mode 100644
>> >> index 000000000000..437dab3fc017
>> >> --- /dev/null
>> >> +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
>> >> @@ -0,0 +1,44 @@
>> >> +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
>> >> +/*
>> >> + * QorIQ FMan v3 10g port #2 device tree stub [ controller @ offset
>> >> 0x400000 ]
>> >> + *
>> >> + * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
>> >> + * Copyright 2012 - 2015 Freescale Semiconductor Inc.
>> >> + */
>> >> +
>> >> +fman@400000 {
>> >> +	fman0_rx_0x08: port@88000 {
>> >> +		cell-index = <0x8>;
>> >> +		compatible = "fsl,fman-v3-port-rx";
>> >> +		reg = <0x88000 0x1000>;
>> >> +		fsl,fman-10g-port;
>> >> +	};
>> >> +
>> >> +	fman0_tx_0x28: port@a8000 {
>> >> +		cell-index = <0x28>;
>> >> +		compatible = "fsl,fman-v3-port-tx";
>> >> +		reg = <0xa8000 0x1000>;
>> >> +		fsl,fman-10g-port;
>> >> +	};
>> >> +
>> >> +	ethernet@e0000 {
>> >> +		cell-index = <0>;
>> >> +		compatible = "fsl,fman-memac";
>> >> +		reg = <0xe0000 0x1000>;
>> >> +		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
>> >> +		ptp-timer = <&ptp_timer0>;
>> >> +		pcsphy-handle = <&pcsphy0>;
>> >> +	};
>> >> +
>> >> +	mdio@e1000 {
>> >> +		#address-cells = <1>;
>> >> +		#size-cells = <0>;
>> >> +		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
>> >> +		reg = <0xe1000 0x1000>;
>> >> +		fsl,erratum-a011043; /* must ignore read errors */
>> >> +
>> >> +		pcsphy0: ethernet-phy@0 {
>> >> +			reg = <0x0>;
>> >> +		};
>> >> +	};
>> >> +};
>> >> diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
>> >> b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
>> >> new file mode 100644
>> >> index 000000000000..ad116b17850a
>> >> --- /dev/null
>> >> +++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
>> >> @@ -0,0 +1,44 @@
>> >> +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
>> >> +/*
>> >> + * QorIQ FMan v3 10g port #3 device tree stub [ controller @ offset
>> >> 0x400000 ]
>> >> + *
>> >> + * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
>> >> + * Copyright 2012 - 2015 Freescale Semiconductor Inc.
>> >> + */
>> >> +
>> >> +fman@400000 {
>> >> +	fman0_rx_0x09: port@89000 {
>> >> +		cell-index = <0x9>;
>> >> +		compatible = "fsl,fman-v3-port-rx";
>> >> +		reg = <0x89000 0x1000>;
>> >> +		fsl,fman-10g-port;
>> >> +	};
>> >> +
>> >> +	fman0_tx_0x29: port@a9000 {
>> >> +		cell-index = <0x29>;
>> >> +		compatible = "fsl,fman-v3-port-tx";
>> >> +		reg = <0xa9000 0x1000>;
>> >> +		fsl,fman-10g-port;
>> >> +	};
>> >> +
>> >> +	ethernet@e2000 {
>> >> +		cell-index = <1>;
>> >> +		compatible = "fsl,fman-memac";
>> >> +		reg = <0xe2000 0x1000>;
>> >> +		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
>> >> +		ptp-timer = <&ptp_timer0>;
>> >> +		pcsphy-handle = <&pcsphy1>;
>> >> +	};
>> >> +
>> >> +	mdio@e3000 {
>> >> +		#address-cells = <1>;
>> >> +		#size-cells = <0>;
>> >> +		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
>> >> +		reg = <0xe3000 0x1000>;
>> >> +		fsl,erratum-a011043; /* must ignore read errors */
>> >> +
>> >> +		pcsphy1: ethernet-phy@0 {
>> >> +			reg = <0x0>;
>> >> +		};
>> >> +	};
>> >> +};
>> >> diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
>> >> b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
>> >> index ecbb447920bc..74e17e134387 100644
>> >> --- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
>> >> +++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
>> >> @@ -609,8 +609,8 @@ usb1: usb@211000 {
>> >>   /include/ "qoriq-bman1.dtsi"
>> >>
>> >>   /include/ "qoriq-fman3-0.dtsi"
>> >> -/include/ "qoriq-fman3-0-1g-0.dtsi"
>> >> -/include/ "qoriq-fman3-0-1g-1.dtsi"
>> >> +/include/ "qoriq-fman3-0-10g-2.dtsi"
>> >> +/include/ "qoriq-fman3-0-10g-3.dtsi"
>> >>   /include/ "qoriq-fman3-0-1g-2.dtsi"
>> >>   /include/ "qoriq-fman3-0-1g-3.dtsi"
>> >>   /include/ "qoriq-fman3-0-1g-4.dtsi"
>> >> --
>> >> 2.35.1.1320.gc452695387.dirty
>> >
>
  

Patch

diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
new file mode 100644
index 000000000000..437dab3fc017
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-2.dtsi
@@ -0,0 +1,44 @@ 
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
+/*
+ * QorIQ FMan v3 10g port #2 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ */
+
+fman@400000 {
+	fman0_rx_0x08: port@88000 {
+		cell-index = <0x8>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x88000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x28: port@a8000 {
+		cell-index = <0x28>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa8000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@e0000 {
+		cell-index = <0>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe0000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy0>;
+	};
+
+	mdio@e1000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe1000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy0: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
new file mode 100644
index 000000000000..ad116b17850a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3-0-10g-3.dtsi
@@ -0,0 +1,44 @@ 
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0-or-later
+/*
+ * QorIQ FMan v3 10g port #3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2022 Sean Anderson <sean.anderson@seco.com>
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ */
+
+fman@400000 {
+	fman0_rx_0x09: port@89000 {
+		cell-index = <0x9>;
+		compatible = "fsl,fman-v3-port-rx";
+		reg = <0x89000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	fman0_tx_0x29: port@a9000 {
+		cell-index = <0x29>;
+		compatible = "fsl,fman-v3-port-tx";
+		reg = <0xa9000 0x1000>;
+		fsl,fman-10g-port;
+	};
+
+	ethernet@e2000 {
+		cell-index = <1>;
+		compatible = "fsl,fman-memac";
+		reg = <0xe2000 0x1000>;
+		fsl,fman-ports = <&fman0_rx_0x09 &fman0_tx_0x29>;
+		ptp-timer = <&ptp_timer0>;
+		pcsphy-handle = <&pcsphy1>;
+	};
+
+	mdio@e3000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+		reg = <0xe3000 0x1000>;
+		fsl,erratum-a011043; /* must ignore read errors */
+
+		pcsphy1: ethernet-phy@0 {
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
index ecbb447920bc..74e17e134387 100644
--- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
@@ -609,8 +609,8 @@  usb1: usb@211000 {
 /include/ "qoriq-bman1.dtsi"
 
 /include/ "qoriq-fman3-0.dtsi"
-/include/ "qoriq-fman3-0-1g-0.dtsi"
-/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-10g-2.dtsi"
+/include/ "qoriq-fman3-0-10g-3.dtsi"
 /include/ "qoriq-fman3-0-1g-2.dtsi"
 /include/ "qoriq-fman3-0-1g-3.dtsi"
 /include/ "qoriq-fman3-0-1g-4.dtsi"