[v9,1/6] selftests/resctrl: Fix set up schemata with 100% allocation on first run in MBM test

Message ID 20230413072259.2089348-2-tan.shaopeng@jp.fujitsu.com
State New
Headers
Series Some improvements of resctrl selftest |

Commit Message

Shaopeng Tan April 13, 2023, 7:22 a.m. UTC
  There is a comment "Set up shemata with 100% allocation on the first run"
in function mbm_setup(), but there is an increment bug and the condition
"num_of_runs == 0" will never be met and write_schemata() will never be
called to set schemata to 100%. Even if write_schemata() is called in MBM
test, since it is not supported for MBM test it does not set the schemata.
This is currently fine because resctrl_val_parm->mum_resctrlfs is always 1
and umount/mount will be run in each test to set the schemata to 100%.

To support the usage when MBM test does not unmount/remount resctrl
filesystem before the test starts, fix to call write_schemata() and
set schemata properly when the function is called for the first time.

Also, remove static local variable 'num_of_runs' because this is not
needed as there is resctrl_val_param->num_of_runs which should be used
instead like in cat_setup().

Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
---
 tools/testing/selftests/resctrl/mbm_test.c  | 13 +++++++------
 tools/testing/selftests/resctrl/resctrlfs.c |  4 +++-
 2 files changed, 10 insertions(+), 7 deletions(-)
  

Comments

Ilpo Järvinen April 14, 2023, 12:31 p.m. UTC | #1
On Thu, 13 Apr 2023, Shaopeng Tan wrote:

> There is a comment "Set up shemata with 100% allocation on the first run"

s/shemata/schemata/

> in function mbm_setup(), but there is an increment bug and the condition
> "num_of_runs == 0" will never be met and write_schemata() will never be
> called to set schemata to 100%. Even if write_schemata() is called in MBM
> test, since it is not supported for MBM test it does not set the schemata.
> This is currently fine because resctrl_val_parm->mum_resctrlfs is always 1
> and umount/mount will be run in each test to set the schemata to 100%.
> 
> To support the usage when MBM test does not unmount/remount resctrl
> filesystem before the test starts, fix to call write_schemata() and
> set schemata properly when the function is called for the first time.
> 
> Also, remove static local variable 'num_of_runs' because this is not
> needed as there is resctrl_val_param->num_of_runs which should be used
> instead like in cat_setup().
> 
> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
> Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> ---
>  tools/testing/selftests/resctrl/mbm_test.c  | 13 +++++++------
>  tools/testing/selftests/resctrl/resctrlfs.c |  4 +++-
>  2 files changed, 10 insertions(+), 7 deletions(-)
> 
> diff --git a/tools/testing/selftests/resctrl/mbm_test.c b/tools/testing/selftests/resctrl/mbm_test.c
> index c9dfa54af42f..9b591c35310f 100644
> --- a/tools/testing/selftests/resctrl/mbm_test.c
> +++ b/tools/testing/selftests/resctrl/mbm_test.c
> @@ -89,23 +89,24 @@ static int check_results(int span)
>  static int mbm_setup(int num, ...)
>  {
>  	struct resctrl_val_param *p;
> -	static int num_of_runs;
>  	va_list param;
>  	int ret = 0;
>  
> -	/* Run NUM_OF_RUNS times */
> -	if (num_of_runs++ >= NUM_OF_RUNS)
> -		return END_OF_TESTS;
> -
>  	va_start(param, num);
>  	p = va_arg(param, struct resctrl_val_param *);
>  	va_end(param);
>  
> +	/* Run NUM_OF_RUNS times */
> +	if (p->num_of_runs >= NUM_OF_RUNS)
> +		return -1;

This is not rebased correctly, negative return values mean now errors.
To complete tests "normally", return END_OF_TESTS. Please see commit 
fa10366cc6f4 ("selftests/resctrl: Allow ->setup() to return errors") for 
future information.

With the forementioned problems fixed:

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
  
Reinette Chatre April 14, 2023, 3:24 p.m. UTC | #2
On 4/14/2023 5:31 AM, Ilpo Järvinen wrote:
> On Thu, 13 Apr 2023, Shaopeng Tan wrote:
> 
>> There is a comment "Set up shemata with 100% allocation on the first run"
> 
> s/shemata/schemata/

Having the typo may be ok since this is a verbatim (typo and all) copy of
an existing comment.

>> in function mbm_setup(), but there is an increment bug and the condition
>> "num_of_runs == 0" will never be met and write_schemata() will never be
>> called to set schemata to 100%. Even if write_schemata() is called in MBM
>> test, since it is not supported for MBM test it does not set the schemata.
>> This is currently fine because resctrl_val_parm->mum_resctrlfs is always 1
>> and umount/mount will be run in each test to set the schemata to 100%.
>>
>> To support the usage when MBM test does not unmount/remount resctrl
>> filesystem before the test starts, fix to call write_schemata() and
>> set schemata properly when the function is called for the first time.
>>
>> Also, remove static local variable 'num_of_runs' because this is not
>> needed as there is resctrl_val_param->num_of_runs which should be used
>> instead like in cat_setup().
>>
>> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
>> Signed-off-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
>> ---
>>  tools/testing/selftests/resctrl/mbm_test.c  | 13 +++++++------
>>  tools/testing/selftests/resctrl/resctrlfs.c |  4 +++-
>>  2 files changed, 10 insertions(+), 7 deletions(-)
>>
>> diff --git a/tools/testing/selftests/resctrl/mbm_test.c b/tools/testing/selftests/resctrl/mbm_test.c
>> index c9dfa54af42f..9b591c35310f 100644
>> --- a/tools/testing/selftests/resctrl/mbm_test.c
>> +++ b/tools/testing/selftests/resctrl/mbm_test.c
>> @@ -89,23 +89,24 @@ static int check_results(int span)
>>  static int mbm_setup(int num, ...)
>>  {
>>  	struct resctrl_val_param *p;
>> -	static int num_of_runs;
>>  	va_list param;
>>  	int ret = 0;
>>  
>> -	/* Run NUM_OF_RUNS times */
>> -	if (num_of_runs++ >= NUM_OF_RUNS)
>> -		return END_OF_TESTS;
>> -
>>  	va_start(param, num);
>>  	p = va_arg(param, struct resctrl_val_param *);
>>  	va_end(param);
>>  
>> +	/* Run NUM_OF_RUNS times */
>> +	if (p->num_of_runs >= NUM_OF_RUNS)
>> +		return -1;
> 
> This is not rebased correctly, negative return values mean now errors.
> To complete tests "normally", return END_OF_TESTS. Please see commit 
> fa10366cc6f4 ("selftests/resctrl: Allow ->setup() to return errors") for 
> future information.
> 
> With the forementioned problems fixed:
> 
> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> 

Thanks for catching this. Unfortunately this was just merged so a separate
fix will be needed.

Reinette
  

Patch

diff --git a/tools/testing/selftests/resctrl/mbm_test.c b/tools/testing/selftests/resctrl/mbm_test.c
index c9dfa54af42f..9b591c35310f 100644
--- a/tools/testing/selftests/resctrl/mbm_test.c
+++ b/tools/testing/selftests/resctrl/mbm_test.c
@@ -89,23 +89,24 @@  static int check_results(int span)
 static int mbm_setup(int num, ...)
 {
 	struct resctrl_val_param *p;
-	static int num_of_runs;
 	va_list param;
 	int ret = 0;
 
-	/* Run NUM_OF_RUNS times */
-	if (num_of_runs++ >= NUM_OF_RUNS)
-		return END_OF_TESTS;
-
 	va_start(param, num);
 	p = va_arg(param, struct resctrl_val_param *);
 	va_end(param);
 
+	/* Run NUM_OF_RUNS times */
+	if (p->num_of_runs >= NUM_OF_RUNS)
+		return -1;
+
 	/* Set up shemata with 100% allocation on the first run. */
-	if (num_of_runs == 0)
+	if (p->num_of_runs == 0)
 		ret = write_schemata(p->ctrlgrp, "100", p->cpu_no,
 				     p->resctrl_val);
 
+	p->num_of_runs++;
+
 	return ret;
 }
 
diff --git a/tools/testing/selftests/resctrl/resctrlfs.c b/tools/testing/selftests/resctrl/resctrlfs.c
index cc6cf49e3129..b31b1d9e41d1 100644
--- a/tools/testing/selftests/resctrl/resctrlfs.c
+++ b/tools/testing/selftests/resctrl/resctrlfs.c
@@ -498,6 +498,7 @@  int write_schemata(char *ctrlgrp, char *schemata, int cpu_no, char *resctrl_val)
 	FILE *fp;
 
 	if (strncmp(resctrl_val, MBA_STR, sizeof(MBA_STR)) &&
+	    strncmp(resctrl_val, MBM_STR, sizeof(MBM_STR)) &&
 	    strncmp(resctrl_val, CAT_STR, sizeof(CAT_STR)) &&
 	    strncmp(resctrl_val, CMT_STR, sizeof(CMT_STR)))
 		return -ENOENT;
@@ -523,7 +524,8 @@  int write_schemata(char *ctrlgrp, char *schemata, int cpu_no, char *resctrl_val)
 	if (!strncmp(resctrl_val, CAT_STR, sizeof(CAT_STR)) ||
 	    !strncmp(resctrl_val, CMT_STR, sizeof(CMT_STR)))
 		sprintf(schema, "%s%d%c%s", "L3:", resource_id, '=', schemata);
-	if (!strncmp(resctrl_val, MBA_STR, sizeof(MBA_STR)))
+	if (!strncmp(resctrl_val, MBA_STR, sizeof(MBA_STR)) ||
+	    !strncmp(resctrl_val, MBM_STR, sizeof(MBM_STR)))
 		sprintf(schema, "%s%d%c%s", "MB:", resource_id, '=', schemata);
 
 	fp = fopen(controlgroup, "w");