phy: cadence: cdns-dphy-rx: Add common module reset support

Message ID 20230314073137.2153-1-vaishnav.a@ti.com
State New
Headers
Series phy: cadence: cdns-dphy-rx: Add common module reset support |

Commit Message

Vaishnav Achath March 14, 2023, 7:31 a.m. UTC
  From: Sinthu Raja <sinthu.raja@ti.com>

DPHY RX module has a common module reset (RSTB_CMN) which is expected
to be released during configuration. In J721E SR1.0 the RSTB_CMN is
internally tied to CSI_RX_RST and is hardware controlled, for all
other newer platforms the common module reset is software controlled.
Add support to control common module reset during configuration and
also skip common module reset based on soc_device_match() for J721E SR1.0.

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Co-developed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
---

Tested on J721E SR1.0 and SR 1.1 by CSI2RX streaming,
without this changes CSI2RX streaming fails on J721E SR1.1
and all other newer TI platforms (J721S2, J784S4, AM62X).

Logs: https://gist.github.com/vaishnavachath/3ecda7de0e63b13c6f765ae2c4f9c5ff

 drivers/phy/cadence/cdns-dphy-rx.c | 32 ++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)
  

Comments

Jai Luthra March 20, 2023, 6:33 a.m. UTC | #1
Hi,

On Mar 14, 2023 at 13:01:37 +0530, Vaishnav Achath wrote:
> From: Sinthu Raja <sinthu.raja@ti.com>
> 
> DPHY RX module has a common module reset (RSTB_CMN) which is expected
> to be released during configuration. In J721E SR1.0 the RSTB_CMN is
> internally tied to CSI_RX_RST and is hardware controlled, for all
> other newer platforms the common module reset is software controlled.
> Add support to control common module reset during configuration and
> also skip common module reset based on soc_device_match() for J721E SR1.0.
> 
> Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
> Co-developed-by: Vaishnav Achath <vaishnav.a@ti.com>
> Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>

Reviewed-by: Jai Luthra <j-luthra@ti.com>

> ---
> 
> Tested on J721E SR1.0 and SR 1.1 by CSI2RX streaming,
> without this changes CSI2RX streaming fails on J721E SR1.1
> and all other newer TI platforms (J721S2, J784S4, AM62X).
> 
> Logs: https://gist.github.com/vaishnavachath/3ecda7de0e63b13c6f765ae2c4f9c5ff
> 
>  drivers/phy/cadence/cdns-dphy-rx.c | 32 ++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/drivers/phy/cadence/cdns-dphy-rx.c b/drivers/phy/cadence/cdns-dphy-rx.c
> index 572c70089a94..c05b043893a9 100644
> --- a/drivers/phy/cadence/cdns-dphy-rx.c
> +++ b/drivers/phy/cadence/cdns-dphy-rx.c
> @@ -11,10 +11,12 @@
>  #include <linux/phy/phy.h>
>  #include <linux/phy/phy-mipi-dphy.h>
>  #include <linux/platform_device.h>
> +#include <linux/sys_soc.h>
>  
>  #define DPHY_PMA_CMN(reg)		(reg)
>  #define DPHY_PCS(reg)			(0xb00 + (reg))
>  #define DPHY_ISO(reg)			(0xc00 + (reg))
> +#define DPHY_WRAP(reg)			(0x1000 + (reg))
>  
>  #define DPHY_CMN_SSM			DPHY_PMA_CMN(0x20)
>  #define DPHY_CMN_RX_MODE_EN		BIT(10)
> @@ -33,6 +35,9 @@
>  #define DPHY_POWER_ISLAND_EN_CLK	DPHY_PCS(0xc)
>  #define DPHY_POWER_ISLAND_EN_CLK_VAL	0xaa
>  
> +#define DPHY_LANE			DPHY_WRAP(0x0)
> +#define DPHY_LANE_RESET_CMN_EN		BIT(23)
> +
>  #define DPHY_ISO_CL_CTRL_L		DPHY_ISO(0x10)
>  #define DPHY_ISO_DL_CTRL_L0		DPHY_ISO(0x14)
>  #define DPHY_ISO_DL_CTRL_L1		DPHY_ISO(0x20)
> @@ -57,6 +62,10 @@ struct cdns_dphy_rx_band {
>  	unsigned int max_rate;
>  };
>  
> +struct cdns_dphy_soc_data {
> +	bool has_hw_cmn_rstb;
> +};
> +
>  /* Order of bands is important since the index is the band number. */
>  static const struct cdns_dphy_rx_band bands[] = {
>  	{ 80, 100 }, { 100, 120 }, { 120, 160 }, { 160, 200 }, { 200, 240 },
> @@ -142,13 +151,36 @@ static int cdns_dphy_rx_wait_lane_ready(struct cdns_dphy_rx *dphy,
>  	return 0;
>  }
>  
> +static struct cdns_dphy_soc_data j721e_soc_data = {
> +	.has_hw_cmn_rstb = true,
> +};
> +
> +static const struct soc_device_attribute cdns_dphy_socinfo[] = {
> +	{
> +		.family = "J721E",
> +		.revision = "SR1.0",
> +		.data = &j721e_soc_data,
> +	},
> +	{/* sentinel */}
> +};
> +
>  static int cdns_dphy_rx_configure(struct phy *phy,
>  				  union phy_configure_opts *opts)
>  {
>  	struct cdns_dphy_rx *dphy = phy_get_drvdata(phy);
>  	unsigned int reg, lanes = opts->mipi_dphy.lanes;
> +	const struct cdns_dphy_soc_data *soc_data = NULL;
> +	const struct soc_device_attribute *soc;
>  	int band_ctrl, ret;
>  
> +	soc = soc_device_match(cdns_dphy_socinfo);
> +	if (soc && soc->data)
> +		soc_data = soc->data;
> +	if (!soc || (soc_data && !soc_data->has_hw_cmn_rstb)) {
> +		reg = DPHY_LANE_RESET_CMN_EN;
> +		writel(reg, dphy->regs + DPHY_LANE);
> +	}
> +
>  	/* Data lanes. Minimum one lane is mandatory. */
>  	if (lanes < DPHY_LANES_MIN || lanes > DPHY_LANES_MAX)
>  		return -EINVAL;
> -- 
> 2.17.1
>
  
Vinod Koul April 12, 2023, 4:46 p.m. UTC | #2
On 14-03-23, 13:01, Vaishnav Achath wrote:
> From: Sinthu Raja <sinthu.raja@ti.com>
> 
> DPHY RX module has a common module reset (RSTB_CMN) which is expected
> to be released during configuration. In J721E SR1.0 the RSTB_CMN is
> internally tied to CSI_RX_RST and is hardware controlled, for all
> other newer platforms the common module reset is software controlled.
> Add support to control common module reset during configuration and
> also skip common module reset based on soc_device_match() for J721E SR1.0.

Applied, thanks
  

Patch

diff --git a/drivers/phy/cadence/cdns-dphy-rx.c b/drivers/phy/cadence/cdns-dphy-rx.c
index 572c70089a94..c05b043893a9 100644
--- a/drivers/phy/cadence/cdns-dphy-rx.c
+++ b/drivers/phy/cadence/cdns-dphy-rx.c
@@ -11,10 +11,12 @@ 
 #include <linux/phy/phy.h>
 #include <linux/phy/phy-mipi-dphy.h>
 #include <linux/platform_device.h>
+#include <linux/sys_soc.h>
 
 #define DPHY_PMA_CMN(reg)		(reg)
 #define DPHY_PCS(reg)			(0xb00 + (reg))
 #define DPHY_ISO(reg)			(0xc00 + (reg))
+#define DPHY_WRAP(reg)			(0x1000 + (reg))
 
 #define DPHY_CMN_SSM			DPHY_PMA_CMN(0x20)
 #define DPHY_CMN_RX_MODE_EN		BIT(10)
@@ -33,6 +35,9 @@ 
 #define DPHY_POWER_ISLAND_EN_CLK	DPHY_PCS(0xc)
 #define DPHY_POWER_ISLAND_EN_CLK_VAL	0xaa
 
+#define DPHY_LANE			DPHY_WRAP(0x0)
+#define DPHY_LANE_RESET_CMN_EN		BIT(23)
+
 #define DPHY_ISO_CL_CTRL_L		DPHY_ISO(0x10)
 #define DPHY_ISO_DL_CTRL_L0		DPHY_ISO(0x14)
 #define DPHY_ISO_DL_CTRL_L1		DPHY_ISO(0x20)
@@ -57,6 +62,10 @@  struct cdns_dphy_rx_band {
 	unsigned int max_rate;
 };
 
+struct cdns_dphy_soc_data {
+	bool has_hw_cmn_rstb;
+};
+
 /* Order of bands is important since the index is the band number. */
 static const struct cdns_dphy_rx_band bands[] = {
 	{ 80, 100 }, { 100, 120 }, { 120, 160 }, { 160, 200 }, { 200, 240 },
@@ -142,13 +151,36 @@  static int cdns_dphy_rx_wait_lane_ready(struct cdns_dphy_rx *dphy,
 	return 0;
 }
 
+static struct cdns_dphy_soc_data j721e_soc_data = {
+	.has_hw_cmn_rstb = true,
+};
+
+static const struct soc_device_attribute cdns_dphy_socinfo[] = {
+	{
+		.family = "J721E",
+		.revision = "SR1.0",
+		.data = &j721e_soc_data,
+	},
+	{/* sentinel */}
+};
+
 static int cdns_dphy_rx_configure(struct phy *phy,
 				  union phy_configure_opts *opts)
 {
 	struct cdns_dphy_rx *dphy = phy_get_drvdata(phy);
 	unsigned int reg, lanes = opts->mipi_dphy.lanes;
+	const struct cdns_dphy_soc_data *soc_data = NULL;
+	const struct soc_device_attribute *soc;
 	int band_ctrl, ret;
 
+	soc = soc_device_match(cdns_dphy_socinfo);
+	if (soc && soc->data)
+		soc_data = soc->data;
+	if (!soc || (soc_data && !soc_data->has_hw_cmn_rstb)) {
+		reg = DPHY_LANE_RESET_CMN_EN;
+		writel(reg, dphy->regs + DPHY_LANE);
+	}
+
 	/* Data lanes. Minimum one lane is mandatory. */
 	if (lanes < DPHY_LANES_MIN || lanes > DPHY_LANES_MAX)
 		return -EINVAL;