diff mbox series

[net-next] net: dsa: mt7530: fix support for MT7531BE

Message ID ZDSlm-0gyyDZXy_k@makrotopia.org
State New
Headers
Series [net-next] net: dsa: mt7530: fix support for MT7531BE |

Commit Message

Daniel Golle April 11, 2023, 12:11 a.m. UTC 
  There are two variants of the MT7531 switch IC which got different
features (and pins) regarding port 5:
 * MT7531AE: SGMII/1000Base-X/2500Base-X SerDes
 * MT7531BE: RGMII

Moving the creation of the SerDes PCS from mt753x_setup to mt7530_probe
with commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation to
mt7530_probe function") works fine for MT7531AE which got two instances
of mtk-pcs-lynxi, however, MT7531BE requires mt7531_pll_setup to setup
clocks before the single PCS on port 6 (usually used as CPU port)
starts to work and hence the PCS creation failed on MT7531BE.

Fix this by introducing a pointer to mt7531_create_sgmii function in
struct mt7530_priv and call it again at the end of mt753x_setup like it
was before commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS
creation to mt7530_probe function").

Fixes: 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation to mt7530_probe function")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 drivers/net/dsa/mt7530-mdio.c | 14 +++++++-------
 drivers/net/dsa/mt7530.c      |  6 ++++++
 drivers/net/dsa/mt7530.h      |  4 ++++
 3 files changed, 17 insertions(+), 7 deletions(-)

Comments

Jesse Brandeburg April 11, 2023, 3:44 p.m. UTC | #1 
On 4/10/2023 5:11 PM, Daniel Golle wrote:
> There are two variants of the MT7531 switch IC which got different
> features (and pins) regarding port 5:
>  * MT7531AE: SGMII/1000Base-X/2500Base-X SerDes
>  * MT7531BE: RGMII
> 
> Moving the creation of the SerDes PCS from mt753x_setup to mt7530_probe
> with commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation to
> mt7530_probe function") works fine for MT7531AE which got two instances
> of mtk-pcs-lynxi, however, MT7531BE requires mt7531_pll_setup to setup
> clocks before the single PCS on port 6 (usually used as CPU port)
> starts to work and hence the PCS creation failed on MT7531BE.
> 
> Fix this by introducing a pointer to mt7531_create_sgmii function in
> struct mt7530_priv and call it again at the end of mt753x_setup like it
> was before commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS
> creation to mt7530_probe function").
> 
> Fixes: 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation to mt7530_probe function")
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> ---
>  drivers/net/dsa/mt7530-mdio.c | 14 +++++++-------
>  drivers/net/dsa/mt7530.c      |  6 ++++++
>  drivers/net/dsa/mt7530.h      |  4 ++++
>  3 files changed, 17 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c
> index 34a547b88e497..f17eab67d15fa 100644
> --- a/drivers/net/dsa/mt7530-mdio.c
> +++ b/drivers/net/dsa/mt7530-mdio.c
> @@ -81,14 +81,17 @@ static const struct regmap_bus mt7530_regmap_bus = {
>  };
>  
>  static int
> -mt7531_create_sgmii(struct mt7530_priv *priv)
> +mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii)
>  {
>  	struct regmap_config *mt7531_pcs_config[2];

[1] use = {};

>  	struct phylink_pcs *pcs;
>  	struct regmap *regmap;
>  	int i, ret = 0;
>  
> -	for (i = 0; i < 2; i++) {
> +	/* MT7531AE has two SGMII units for port 5 and port 6
> +	 * MT7531BE has only one SGMII unit for port 6
> +	 */
> +	for (i = dual_sgmii ? 0 : 1; i < 2; i++) {
>  		mt7531_pcs_config[i] = devm_kzalloc(priv->dev,

hm, I don't like this, you're no longer initializing array[0] if
dual_sgmii is set. This seems like a recipe for disaster.

you could initialize the array to NULL above when allocating this on the
stack? [1]


>  						    sizeof(struct regmap_config),
>  						    GFP_KERNEL);
> @@ -208,11 +211,8 @@ mt7530_probe(struct mdio_device *mdiodev)
>  	if (IS_ERR(priv->regmap))
>  		return PTR_ERR(priv->regmap);
>  
> -	if (priv->id == ID_MT7531) {
> -		ret = mt7531_create_sgmii(priv);
> -		if (ret)
> -			return ret;
> -	}
> +	if (priv->id == ID_MT7531)
> +		priv->create_sgmii = mt7531_create_sgmii;
>  
>  	return dsa_register_switch(priv->ds);
>  }
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index e4bb5037d3525..c680873819b01 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -3018,6 +3018,12 @@ mt753x_setup(struct dsa_switch *ds)
>  	if (ret && priv->irq)
>  		mt7530_free_irq_common(priv);
>  
> +	if (priv->create_sgmii) {
> +		ret = priv->create_sgmii(priv, mt7531_dual_sgmii_supported(priv));
> +		if (ret && priv->irq)
> +			mt7530_free_irq(priv);
> +	}
> +
>  	return ret;
>  }
>  
> diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
> index 01db5c9724fa8..6e89578b4de02 100644
> --- a/drivers/net/dsa/mt7530.h
> +++ b/drivers/net/dsa/mt7530.h
> @@ -752,6 +752,8 @@ struct mt753x_info {
>   * @irq:		IRQ number of the switch
>   * @irq_domain:		IRQ domain of the switch irq_chip
>   * @irq_enable:		IRQ enable bits, synced to SYS_INT_EN
> + *

no extra blank line needed here.

> + * @create_sgmii:	Pointer to function creating SGMII PCS instance(s)
>   */
>  struct mt7530_priv {
>  	struct device		*dev;
> @@ -778,6 +780,8 @@ struct mt7530_priv {
>  	int irq;
>  	struct irq_domain *irq_domain;
>  	u32 irq_enable;
> +
> +	int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii);
>  };
>  
>  struct mt7530_hw_vlan_entry {
Arınç ÜNAL April 11, 2023, 7:30 p.m. UTC | #2 
On 11.04.2023 03:11, Daniel Golle wrote:
> There are two variants of the MT7531 switch IC which got different
> features (and pins) regarding port 5:
>   * MT7531AE: SGMII/1000Base-X/2500Base-X SerDes
>   * MT7531BE: RGMII
> 
> Moving the creation of the SerDes PCS from mt753x_setup to mt7530_probe
> with commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation to
> mt7530_probe function") works fine for MT7531AE which got two instances
> of mtk-pcs-lynxi, however, MT7531BE requires mt7531_pll_setup to setup
> clocks before the single PCS on port 6 (usually used as CPU port)
> starts to work and hence the PCS creation failed on MT7531BE.
> 
> Fix this by introducing a pointer to mt7531_create_sgmii function in
> struct mt7530_priv and call it again at the end of mt753x_setup like it
> was before commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS
> creation to mt7530_probe function").

If I understand correctly, this patch does two things.

Run mt7531_create_sgmii() from mt753x_setup(), after mt7531_setup() and 
mt7531_setup_common() is run so that PCS on MT7531BE works.

Run the PCS creation code inside the loop only once if 
mt7531_dual_sgmii_supported() is false so it doesn't set the nonexistent 
port 5 SGMII on MT7531BE.

Regarding the first part:
I was actually in the middle of moving the code until after 
mt7530_pll_setup() and mt7531_pll_setup() on mt7530_setup() and 
mt7531_setup() to mt7530_probe(). To me it makes more sense to run them 
on mt7530_probe() as there's a good amount of duplicate code on 
mt7530_setup() and mt7531_setup().

This will resolve the problem here, and make my future work regarding 
the PHY muxing feature on the MT7530 switch possible to do.

Regarding the second part:
I'll take your changes to my current RFC patch series while addressing 
Jesse's suggestion if this is fine by you.

Arınç
Daniel Golle April 11, 2023, 7:43 p.m. UTC | #3 
On Tue, Apr 11, 2023 at 10:30:06PM +0300, Arınç ÜNAL wrote:
> On 11.04.2023 03:11, Daniel Golle wrote:
> > There are two variants of the MT7531 switch IC which got different
> > features (and pins) regarding port 5:
> >   * MT7531AE: SGMII/1000Base-X/2500Base-X SerDes
> >   * MT7531BE: RGMII
> > 
> > Moving the creation of the SerDes PCS from mt753x_setup to mt7530_probe
> > with commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation to
> > mt7530_probe function") works fine for MT7531AE which got two instances
> > of mtk-pcs-lynxi, however, MT7531BE requires mt7531_pll_setup to setup
> > clocks before the single PCS on port 6 (usually used as CPU port)
> > starts to work and hence the PCS creation failed on MT7531BE.
> > 
> > Fix this by introducing a pointer to mt7531_create_sgmii function in
> > struct mt7530_priv and call it again at the end of mt753x_setup like it
> > was before commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS
> > creation to mt7530_probe function").
> 
> If I understand correctly, this patch does two things.
> 
> Run mt7531_create_sgmii() from mt753x_setup(), after mt7531_setup() and
> mt7531_setup_common() is run so that PCS on MT7531BE works.

> 
> Run the PCS creation code inside the loop only once if
> mt7531_dual_sgmii_supported() is false so it doesn't set the nonexistent
> port 5 SGMII on MT7531BE.

Yes, both is correct.

> 
> Regarding the first part:
> I was actually in the middle of moving the code until after
> mt7530_pll_setup() and mt7531_pll_setup() on mt7530_setup() and
> mt7531_setup() to mt7530_probe(). To me it makes more sense to run them on
> mt7530_probe() as there's a good amount of duplicate code on mt7530_setup()
> and mt7531_setup().

I thought about doing that as well, however, note that you will have to
move all the reset and regulator setup procedure to mt7530_probe() as
well then, as PLL setup currently happens after that, and that's
probably for a reason.

As the reset and regulator setup works differently on MT7530 and
MT7531, and depending on whether it's a standalone IC package or MCM, I
believe changes unifying this will have to be tested on a lot of
boards...

> 
> This will resolve the problem here, and make my future work regarding the
> PHY muxing feature on the MT7530 switch possible to do.
> 
> Regarding the second part:
> I'll take your changes to my current RFC patch series while addressing
> Jesse's suggestion if this is fine by you.

Yes, I'd appreciate that and I'm ready to test and review once you post
your updated series.
Arınç ÜNAL April 11, 2023, 7:50 p.m. UTC | #4 
On 11.04.2023 22:43, Daniel Golle wrote:
> On Tue, Apr 11, 2023 at 10:30:06PM +0300, Arınç ÜNAL wrote:
>> On 11.04.2023 03:11, Daniel Golle wrote:
>>> There are two variants of the MT7531 switch IC which got different
>>> features (and pins) regarding port 5:
>>>    * MT7531AE: SGMII/1000Base-X/2500Base-X SerDes
>>>    * MT7531BE: RGMII
>>>
>>> Moving the creation of the SerDes PCS from mt753x_setup to mt7530_probe
>>> with commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS creation to
>>> mt7530_probe function") works fine for MT7531AE which got two instances
>>> of mtk-pcs-lynxi, however, MT7531BE requires mt7531_pll_setup to setup
>>> clocks before the single PCS on port 6 (usually used as CPU port)
>>> starts to work and hence the PCS creation failed on MT7531BE.
>>>
>>> Fix this by introducing a pointer to mt7531_create_sgmii function in
>>> struct mt7530_priv and call it again at the end of mt753x_setup like it
>>> was before commit 6de285229773 ("net: dsa: mt7530: move SGMII PCS
>>> creation to mt7530_probe function").
>>
>> If I understand correctly, this patch does two things.
>>
>> Run mt7531_create_sgmii() from mt753x_setup(), after mt7531_setup() and
>> mt7531_setup_common() is run so that PCS on MT7531BE works.
> 
>>
>> Run the PCS creation code inside the loop only once if
>> mt7531_dual_sgmii_supported() is false so it doesn't set the nonexistent
>> port 5 SGMII on MT7531BE.
> 
> Yes, both is correct.
> 
>>
>> Regarding the first part:
>> I was actually in the middle of moving the code until after
>> mt7530_pll_setup() and mt7531_pll_setup() on mt7530_setup() and
>> mt7531_setup() to mt7530_probe(). To me it makes more sense to run them on
>> mt7530_probe() as there's a good amount of duplicate code on mt7530_setup()
>> and mt7531_setup().
> 
> I thought about doing that as well, however, note that you will have to
> move all the reset and regulator setup procedure to mt7530_probe() as
> well then, as PLL setup currently happens after that, and that's
> probably for a reason.
> 
> As the reset and regulator setup works differently on MT7530 and
> MT7531, and depending on whether it's a standalone IC package or MCM, I
> believe changes unifying this will have to be tested on a lot of
> boards...

Not if we don't change the behaviour at all for both switches, which is 
what I intend to do.

> 
>>
>> This will resolve the problem here, and make my future work regarding the
>> PHY muxing feature on the MT7530 switch possible to do.
>>
>> Regarding the second part:
>> I'll take your changes to my current RFC patch series while addressing
>> Jesse's suggestion if this is fine by you.
> 
> Yes, I'd appreciate that and I'm ready to test and review once you post
> your updated series.

Sounds good, cheers.

Arınç
diff mbox series

Patch

diff --git a/drivers/net/dsa/mt7530-mdio.c b/drivers/net/dsa/mt7530-mdio.c
index 34a547b88e497..f17eab67d15fa 100644
--- a/drivers/net/dsa/mt7530-mdio.c
+++ b/drivers/net/dsa/mt7530-mdio.c
@@ -81,14 +81,17 @@  static const struct regmap_bus mt7530_regmap_bus = {
 };
 
 static int
-mt7531_create_sgmii(struct mt7530_priv *priv)
+mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii)
 {
 	struct regmap_config *mt7531_pcs_config[2];
 	struct phylink_pcs *pcs;
 	struct regmap *regmap;
 	int i, ret = 0;
 
-	for (i = 0; i < 2; i++) {
+	/* MT7531AE has two SGMII units for port 5 and port 6
+	 * MT7531BE has only one SGMII unit for port 6
+	 */
+	for (i = dual_sgmii ? 0 : 1; i < 2; i++) {
 		mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
 						    sizeof(struct regmap_config),
 						    GFP_KERNEL);
@@ -208,11 +211,8 @@  mt7530_probe(struct mdio_device *mdiodev)
 	if (IS_ERR(priv->regmap))
 		return PTR_ERR(priv->regmap);
 
-	if (priv->id == ID_MT7531) {
-		ret = mt7531_create_sgmii(priv);
-		if (ret)
-			return ret;
-	}
+	if (priv->id == ID_MT7531)
+		priv->create_sgmii = mt7531_create_sgmii;
 
 	return dsa_register_switch(priv->ds);
 }
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index e4bb5037d3525..c680873819b01 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -3018,6 +3018,12 @@  mt753x_setup(struct dsa_switch *ds)
 	if (ret && priv->irq)
 		mt7530_free_irq_common(priv);
 
+	if (priv->create_sgmii) {
+		ret = priv->create_sgmii(priv, mt7531_dual_sgmii_supported(priv));
+		if (ret && priv->irq)
+			mt7530_free_irq(priv);
+	}
+
 	return ret;
 }
 
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 01db5c9724fa8..6e89578b4de02 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -752,6 +752,8 @@  struct mt753x_info {
  * @irq:		IRQ number of the switch
  * @irq_domain:		IRQ domain of the switch irq_chip
  * @irq_enable:		IRQ enable bits, synced to SYS_INT_EN
+ *
+ * @create_sgmii:	Pointer to function creating SGMII PCS instance(s)
  */
 struct mt7530_priv {
 	struct device		*dev;
@@ -778,6 +780,8 @@  struct mt7530_priv {
 	int irq;
 	struct irq_domain *irq_domain;
 	u32 irq_enable;
+
+	int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii);
 };
 
 struct mt7530_hw_vlan_entry {